projects / deliverable / linux.git / blame
| Commit | Line | Data |
|---|---|---|
| 124bfc66 TL |
1 | /* |
| 2 | * This program is free software; you can redistribute it and/or modify | |
| 3 | * it under the terms of the GNU General Public License version 2 as | |
| 4 | * published by the Free Software Foundation. | |
| 5 | */ | |
| 6 | /dts-v1/; | |
| 7 | ||
| 8 | #include "dra62x.dtsi" | |
| 9 | ||
| 10 | / { | |
| 11 | model = "DRA62x J5 Eco EVM"; | |
| 12 | compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148"; | |
| 13 | ||
| 14 | memory { | |
| 15 | device_type = "memory"; | |
| 16 | reg = <0x80000000 0x40000000>; /* 1 GB */ | |
| 17 | }; | |
| 4d810fb2 TL |
18 | |
| 19 | /* MIC94060YC6 controlled by SD1_POW pin */ | |
| 20 | vmmcsd_fixed: fixedregulator@0 { | |
| 21 | compatible = "regulator-fixed"; | |
| 22 | regulator-name = "vmmcsd_fixed"; | |
| 23 | regulator-min-microvolt = <3300000>; | |
| 24 | regulator-max-microvolt = <3300000>; | |
| 25 | }; | |
| 124bfc66 TL |
26 | }; |
| 27 | ||
| 28 | &cpsw_emac0 { | |
| 29 | phy_id = <&davinci_mdio>, <0>; | |
| 30 | phy-mode = "rgmii"; | |
| 31 | }; | |
| 32 | ||
| 33 | &cpsw_emac1 { | |
| 34 | phy_id = <&davinci_mdio>, <1>; | |
| 35 | phy-mode = "rgmii"; | |
| 36 | }; | |
| 4d810fb2 TL |
37 | |
| 38 | &mmc2 { | |
| 39 | pinctrl-names = "default"; | |
| 40 | pinctrl-0 = <&sd1_pins>; | |
| 41 | vmmc-supply = <&vmmcsd_fixed>; | |
| 42 | bus-width = <4>; | |
| 43 | cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; | |
| 44 | }; | |
| 45 | ||
| 46 | &pincntl { | |
| 47 | sd1_pins: pinmux_sd1_pins { | |
| 48 | pinctrl-single,pins = < | |
| 49 | DM814X_IOPAD(0x0800, PIN_INPUT | 0x1) /* SD1_CLK */ | |
| 50 | DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP | 0x1) /* SD1_CMD */ | |
| 51 | DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[0] */ | |
| 52 | DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[1] */ | |
| 53 | DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[2] */ | |
| 54 | DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[3] */ | |
| 55 | DM814X_IOPAD(0x0924, PIN_OUTPUT | 0x40) /* SD1_POW */ | |
| 56 | DM814X_IOPAD(0x093C, PIN_INPUT_PULLUP | 0x80) /* GP1[6] */ | |
| 57 | >; | |
| 58 | }; | |
| 43fe6de3 TL |
59 | |
| 60 | usb0_pins: pinmux_usb0_pins { | |
| 61 | pinctrl-single,pins = < | |
| 62 | DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1) /* USB0_DRVVBUS */ | |
| 63 | >; | |
| 64 | }; | |
| 65 | }; | |
| 66 | ||
| 67 | /* USB0_ID pin state: SW10[1] = 0 cable detection, SW10[1] = 1 ID grounded */ | |
| 68 | &usb0 { | |
| 69 | pinctrl-names = "default"; | |
| 70 | pinctrl-0 = <&usb0_pins>; | |
| 71 | dr_mode = "otg"; | |
| 72 | }; | |
| 73 | ||
| 74 | &usb1_phy { | |
| 75 | status = "disabled"; | |
| 76 | }; | |
| 77 | ||
| 78 | &usb1 { | |
| 79 | status = "disabled"; | |
| 4d810fb2 | 80 | }; |