Commit | Line | Data |
---|---|---|
6e58b8f1 S |
1 | /* |
2 | * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ | |
3 | * | |
4 | * This program is free software; you can redistribute it and/or modify | |
5 | * it under the terms of the GNU General Public License version 2 as | |
6 | * published by the Free Software Foundation. | |
7 | */ | |
8 | /dts-v1/; | |
9 | ||
38b248db | 10 | #include "dra74x.dtsi" |
c7cc9ba1 | 11 | #include <dt-bindings/gpio/gpio.h> |
6e58b8f1 S |
12 | |
13 | / { | |
38b248db RN |
14 | model = "TI DRA742"; |
15 | compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7"; | |
6e58b8f1 S |
16 | |
17 | memory { | |
18 | device_type = "memory"; | |
19 | reg = <0x80000000 0x60000000>; /* 1536 MB */ | |
20 | }; | |
6cf02dbb B |
21 | |
22 | mmc2_3v3: fixedregulator-mmc2 { | |
23 | compatible = "regulator-fixed"; | |
24 | regulator-name = "mmc2_3v3"; | |
25 | regulator-min-microvolt = <3300000>; | |
26 | regulator-max-microvolt = <3300000>; | |
27 | }; | |
c7cc9ba1 | 28 | |
87517d26 RQ |
29 | extcon_usb1: extcon_usb1 { |
30 | compatible = "linux,extcon-usb-gpio"; | |
31 | id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; | |
32 | }; | |
33 | ||
34 | extcon_usb2: extcon_usb2 { | |
35 | compatible = "linux,extcon-usb-gpio"; | |
36 | id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; | |
37 | }; | |
38 | ||
c7cc9ba1 LV |
39 | vtt_fixed: fixedregulator-vtt { |
40 | compatible = "regulator-fixed"; | |
41 | regulator-name = "vtt_fixed"; | |
42 | regulator-min-microvolt = <1350000>; | |
43 | regulator-max-microvolt = <1350000>; | |
44 | regulator-always-on; | |
45 | regulator-boot-on; | |
46 | enable-active-high; | |
47 | gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; | |
48 | }; | |
6e58b8f1 S |
49 | }; |
50 | ||
51 | &dra7_pmx_core { | |
c7cc9ba1 LV |
52 | pinctrl-names = "default"; |
53 | pinctrl-0 = <&vtt_pin>; | |
54 | ||
55 | vtt_pin: pinmux_vtt_pin { | |
56 | pinctrl-single,pins = < | |
57 | 0x3b4 (PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */ | |
58 | >; | |
59 | }; | |
60 | ||
6e58b8f1 S |
61 | i2c1_pins: pinmux_i2c1_pins { |
62 | pinctrl-single,pins = < | |
63 | 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */ | |
64 | 0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl */ | |
65 | >; | |
66 | }; | |
67 | ||
68 | i2c2_pins: pinmux_i2c2_pins { | |
69 | pinctrl-single,pins = < | |
70 | 0x408 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */ | |
71 | 0x40c (PIN_INPUT | MUX_MODE0) /* i2c2_scl */ | |
72 | >; | |
73 | }; | |
74 | ||
75 | i2c3_pins: pinmux_i2c3_pins { | |
76 | pinctrl-single,pins = < | |
544d63d0 RQ |
77 | 0x288 (PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */ |
78 | 0x28c (PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */ | |
6e58b8f1 S |
79 | >; |
80 | }; | |
81 | ||
82 | mcspi1_pins: pinmux_mcspi1_pins { | |
83 | pinctrl-single,pins = < | |
68e4d9e5 NM |
84 | 0x3a4 (PIN_INPUT | MUX_MODE0) /* spi1_sclk */ |
85 | 0x3a8 (PIN_INPUT | MUX_MODE0) /* spi1_d1 */ | |
86 | 0x3ac (PIN_INPUT | MUX_MODE0) /* spi1_d0 */ | |
87 | 0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */ | |
68e4d9e5 NM |
88 | 0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */ |
89 | 0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */ | |
6e58b8f1 S |
90 | >; |
91 | }; | |
92 | ||
93 | mcspi2_pins: pinmux_mcspi2_pins { | |
94 | pinctrl-single,pins = < | |
95 | 0x3c0 (PIN_INPUT | MUX_MODE0) /* spi2_sclk */ | |
96 | 0x3c4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */ | |
97 | 0x3c8 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */ | |
98 | 0x3cc (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */ | |
99 | >; | |
100 | }; | |
101 | ||
102 | uart1_pins: pinmux_uart1_pins { | |
103 | pinctrl-single,pins = < | |
104 | 0x3e0 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */ | |
105 | 0x3e4 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */ | |
106 | 0x3e8 (PIN_INPUT | MUX_MODE3) /* uart1_ctsn */ | |
107 | 0x3ec (PIN_INPUT | MUX_MODE3) /* uart1_rtsn */ | |
108 | >; | |
109 | }; | |
110 | ||
111 | uart2_pins: pinmux_uart2_pins { | |
112 | pinctrl-single,pins = < | |
113 | 0x3f0 (PIN_INPUT | MUX_MODE0) /* uart2_rxd */ | |
114 | 0x3f4 (PIN_INPUT | MUX_MODE0) /* uart2_txd */ | |
115 | 0x3f8 (PIN_INPUT | MUX_MODE0) /* uart2_ctsn */ | |
116 | 0x3fc (PIN_INPUT | MUX_MODE0) /* uart2_rtsn */ | |
117 | >; | |
118 | }; | |
119 | ||
120 | uart3_pins: pinmux_uart3_pins { | |
121 | pinctrl-single,pins = < | |
122 | 0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */ | |
123 | 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */ | |
124 | >; | |
125 | }; | |
dc2dd5b8 SP |
126 | |
127 | qspi1_pins: pinmux_qspi1_pins { | |
128 | pinctrl-single,pins = < | |
129 | 0x4c (PIN_INPUT | MUX_MODE1) /* gpmc_a3.qspi1_cs2 */ | |
130 | 0x50 (PIN_INPUT | MUX_MODE1) /* gpmc_a4.qspi1_cs3 */ | |
131 | 0x74 (PIN_INPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */ | |
132 | 0x78 (PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */ | |
133 | 0x7c (PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */ | |
134 | 0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */ | |
135 | 0x84 (PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */ | |
136 | 0x88 (PIN_INPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */ | |
137 | 0xb8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */ | |
138 | 0xbc (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs3.qspi1_cs1 */ | |
139 | >; | |
140 | }; | |
4b4437cb RQ |
141 | |
142 | usb1_pins: pinmux_usb1_pins { | |
143 | pinctrl-single,pins = < | |
144 | 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ | |
145 | >; | |
146 | }; | |
147 | ||
148 | usb2_pins: pinmux_usb2_pins { | |
149 | pinctrl-single,pins = < | |
150 | 0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */ | |
151 | >; | |
152 | }; | |
ff66a3c8 MS |
153 | |
154 | nand_flash_x16: nand_flash_x16 { | |
155 | /* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch | |
156 | * So NAND flash requires following switch settings: | |
157 | * SW5.9 (GPMC_WPN) = LOW | |
158 | * SW5.1 (NAND_BOOTn) = HIGH */ | |
159 | pinctrl-single,pins = < | |
160 | 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */ | |
161 | 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */ | |
162 | 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */ | |
163 | 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */ | |
164 | 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */ | |
165 | 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */ | |
166 | 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */ | |
167 | 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */ | |
168 | 0x20 (PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */ | |
169 | 0x24 (PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */ | |
170 | 0x28 (PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */ | |
171 | 0x2c (PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */ | |
172 | 0x30 (PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */ | |
173 | 0x34 (PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */ | |
174 | 0x38 (PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */ | |
175 | 0x3c (PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */ | |
176 | 0xd8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0 */ | |
177 | 0xcc (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */ | |
178 | 0xb4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0 */ | |
179 | 0xc4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */ | |
180 | 0xc8 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */ | |
181 | 0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle */ | |
182 | >; | |
183 | }; | |
8d039290 M |
184 | |
185 | cpsw_default: cpsw_default { | |
186 | pinctrl-single,pins = < | |
187 | /* Slave 1 */ | |
188 | 0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txc.rgmii0_txc */ | |
189 | 0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txctl.rgmii0_txctl */ | |
190 | 0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_td3.rgmii0_txd3 */ | |
191 | 0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd2.rgmii0_txd2 */ | |
192 | 0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd1.rgmii0_txd1 */ | |
193 | 0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd0.rgmii0_txd0 */ | |
194 | 0x268 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxc.rgmii0_rxc */ | |
195 | 0x26c (PIN_INPUT | MUX_MODE0) /* rgmii0_rxctl.rgmii0_rxctl */ | |
196 | 0x270 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd3.rgmii0_rxd3 */ | |
197 | 0x274 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd2.rgmii0_rxd2 */ | |
198 | 0x278 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd1.rgmii0_rxd1 */ | |
199 | 0x27c (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd0.rgmii0_rxd0 */ | |
200 | ||
201 | /* Slave 2 */ | |
202 | 0x198 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */ | |
203 | 0x19c (PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */ | |
204 | 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */ | |
205 | 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */ | |
206 | 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */ | |
207 | 0x1ac (PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */ | |
208 | 0x1b0 (PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */ | |
209 | 0x1b4 (PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */ | |
210 | 0x1b8 (PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */ | |
211 | 0x1bc (PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */ | |
212 | 0x1c0 (PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */ | |
213 | 0x1c4 (PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ | |
214 | >; | |
215 | ||
216 | }; | |
217 | ||
218 | cpsw_sleep: cpsw_sleep { | |
219 | pinctrl-single,pins = < | |
220 | /* Slave 1 */ | |
221 | 0x250 (MUX_MODE15) | |
222 | 0x254 (MUX_MODE15) | |
223 | 0x258 (MUX_MODE15) | |
224 | 0x25c (MUX_MODE15) | |
225 | 0x260 (MUX_MODE15) | |
226 | 0x264 (MUX_MODE15) | |
227 | 0x268 (MUX_MODE15) | |
228 | 0x26c (MUX_MODE15) | |
229 | 0x270 (MUX_MODE15) | |
230 | 0x274 (MUX_MODE15) | |
231 | 0x278 (MUX_MODE15) | |
232 | 0x27c (MUX_MODE15) | |
233 | ||
234 | /* Slave 2 */ | |
235 | 0x198 (MUX_MODE15) | |
236 | 0x19c (MUX_MODE15) | |
237 | 0x1a0 (MUX_MODE15) | |
238 | 0x1a4 (MUX_MODE15) | |
239 | 0x1a8 (MUX_MODE15) | |
240 | 0x1ac (MUX_MODE15) | |
241 | 0x1b0 (MUX_MODE15) | |
242 | 0x1b4 (MUX_MODE15) | |
243 | 0x1b8 (MUX_MODE15) | |
244 | 0x1bc (MUX_MODE15) | |
245 | 0x1c0 (MUX_MODE15) | |
246 | 0x1c4 (MUX_MODE15) | |
247 | >; | |
248 | }; | |
249 | ||
250 | davinci_mdio_default: davinci_mdio_default { | |
251 | pinctrl-single,pins = < | |
252 | 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */ | |
253 | 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ | |
254 | >; | |
255 | }; | |
256 | ||
257 | davinci_mdio_sleep: davinci_mdio_sleep { | |
258 | pinctrl-single,pins = < | |
259 | 0x23c (MUX_MODE15) | |
260 | 0x240 (MUX_MODE15) | |
261 | >; | |
262 | }; | |
263 | ||
b41502e0 RQ |
264 | dcan1_pins_default: dcan1_pins_default { |
265 | pinctrl-single,pins = < | |
d80d581b RQ |
266 | 0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ |
267 | 0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */ | |
b41502e0 RQ |
268 | >; |
269 | }; | |
270 | ||
271 | dcan1_pins_sleep: dcan1_pins_sleep { | |
272 | pinctrl-single,pins = < | |
d80d581b RQ |
273 | 0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ |
274 | 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */ | |
b41502e0 RQ |
275 | >; |
276 | }; | |
6e58b8f1 S |
277 | }; |
278 | ||
279 | &i2c1 { | |
280 | status = "okay"; | |
281 | pinctrl-names = "default"; | |
282 | pinctrl-0 = <&i2c1_pins>; | |
283 | clock-frequency = <400000>; | |
c56a831c K |
284 | |
285 | tps659038: tps659038@58 { | |
286 | compatible = "ti,tps659038"; | |
287 | reg = <0x58>; | |
288 | ||
289 | tps659038_pmic { | |
290 | compatible = "ti,tps659038-pmic"; | |
291 | ||
292 | regulators { | |
293 | smps123_reg: smps123 { | |
294 | /* VDD_MPU */ | |
295 | regulator-name = "smps123"; | |
296 | regulator-min-microvolt = < 850000>; | |
297 | regulator-max-microvolt = <1250000>; | |
298 | regulator-always-on; | |
299 | regulator-boot-on; | |
300 | }; | |
301 | ||
302 | smps45_reg: smps45 { | |
303 | /* VDD_DSPEVE */ | |
304 | regulator-name = "smps45"; | |
305 | regulator-min-microvolt = < 850000>; | |
306 | regulator-max-microvolt = <1150000>; | |
395b23ca | 307 | regulator-always-on; |
c56a831c K |
308 | regulator-boot-on; |
309 | }; | |
310 | ||
311 | smps6_reg: smps6 { | |
312 | /* VDD_GPU - over VDD_SMPS6 */ | |
313 | regulator-name = "smps6"; | |
314 | regulator-min-microvolt = <850000>; | |
d114e854 | 315 | regulator-max-microvolt = <1250000>; |
395b23ca | 316 | regulator-always-on; |
c56a831c K |
317 | regulator-boot-on; |
318 | }; | |
319 | ||
320 | smps7_reg: smps7 { | |
321 | /* CORE_VDD */ | |
322 | regulator-name = "smps7"; | |
323 | regulator-min-microvolt = <850000>; | |
70fcaf92 | 324 | regulator-max-microvolt = <1060000>; |
c56a831c K |
325 | regulator-always-on; |
326 | regulator-boot-on; | |
327 | }; | |
328 | ||
329 | smps8_reg: smps8 { | |
330 | /* VDD_IVAHD */ | |
331 | regulator-name = "smps8"; | |
332 | regulator-min-microvolt = < 850000>; | |
333 | regulator-max-microvolt = <1250000>; | |
395b23ca | 334 | regulator-always-on; |
c56a831c K |
335 | regulator-boot-on; |
336 | }; | |
337 | ||
338 | smps9_reg: smps9 { | |
339 | /* VDDS1V8 */ | |
340 | regulator-name = "smps9"; | |
341 | regulator-min-microvolt = <1800000>; | |
342 | regulator-max-microvolt = <1800000>; | |
343 | regulator-always-on; | |
344 | regulator-boot-on; | |
345 | }; | |
346 | ||
347 | ldo1_reg: ldo1 { | |
348 | /* LDO1_OUT --> SDIO */ | |
349 | regulator-name = "ldo1"; | |
350 | regulator-min-microvolt = <1800000>; | |
351 | regulator-max-microvolt = <3300000>; | |
352 | regulator-boot-on; | |
353 | }; | |
354 | ||
355 | ldo2_reg: ldo2 { | |
356 | /* VDD_RTCIO */ | |
357 | /* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */ | |
358 | regulator-name = "ldo2"; | |
359 | regulator-min-microvolt = <3300000>; | |
360 | regulator-max-microvolt = <3300000>; | |
395b23ca | 361 | regulator-always-on; |
c56a831c K |
362 | regulator-boot-on; |
363 | }; | |
364 | ||
365 | ldo3_reg: ldo3 { | |
366 | /* VDDA_1V8_PHY */ | |
367 | regulator-name = "ldo3"; | |
368 | regulator-min-microvolt = <1800000>; | |
369 | regulator-max-microvolt = <1800000>; | |
e120fb45 | 370 | regulator-always-on; |
c56a831c K |
371 | regulator-boot-on; |
372 | }; | |
373 | ||
374 | ldo9_reg: ldo9 { | |
375 | /* VDD_RTC */ | |
376 | regulator-name = "ldo9"; | |
377 | regulator-min-microvolt = <1050000>; | |
378 | regulator-max-microvolt = <1050000>; | |
395b23ca | 379 | regulator-always-on; |
c56a831c K |
380 | regulator-boot-on; |
381 | }; | |
382 | ||
383 | ldoln_reg: ldoln { | |
384 | /* VDDA_1V8_PLL */ | |
385 | regulator-name = "ldoln"; | |
386 | regulator-min-microvolt = <1800000>; | |
387 | regulator-max-microvolt = <1800000>; | |
388 | regulator-always-on; | |
389 | regulator-boot-on; | |
390 | }; | |
391 | ||
392 | ldousb_reg: ldousb { | |
393 | /* VDDA_3V_USB: VDDA_USBHS33 */ | |
394 | regulator-name = "ldousb"; | |
395 | regulator-min-microvolt = <3300000>; | |
396 | regulator-max-microvolt = <3300000>; | |
397 | regulator-boot-on; | |
398 | }; | |
399 | }; | |
400 | }; | |
401 | }; | |
87517d26 RQ |
402 | |
403 | pcf_gpio_21: gpio@21 { | |
404 | compatible = "ti,pcf8575"; | |
405 | reg = <0x21>; | |
406 | lines-initial-states = <0x1408>; | |
407 | gpio-controller; | |
408 | #gpio-cells = <2>; | |
409 | interrupt-parent = <&gpio6>; | |
410 | interrupts = <11 IRQ_TYPE_EDGE_FALLING>; | |
411 | interrupt-controller; | |
412 | #interrupt-cells = <2>; | |
413 | }; | |
414 | ||
6e58b8f1 S |
415 | }; |
416 | ||
417 | &i2c2 { | |
418 | status = "okay"; | |
419 | pinctrl-names = "default"; | |
420 | pinctrl-0 = <&i2c2_pins>; | |
421 | clock-frequency = <400000>; | |
422 | }; | |
423 | ||
424 | &i2c3 { | |
425 | status = "okay"; | |
426 | pinctrl-names = "default"; | |
427 | pinctrl-0 = <&i2c3_pins>; | |
544d63d0 | 428 | clock-frequency = <400000>; |
6e58b8f1 S |
429 | }; |
430 | ||
431 | &mcspi1 { | |
432 | status = "okay"; | |
433 | pinctrl-names = "default"; | |
434 | pinctrl-0 = <&mcspi1_pins>; | |
435 | }; | |
436 | ||
437 | &mcspi2 { | |
438 | status = "okay"; | |
439 | pinctrl-names = "default"; | |
440 | pinctrl-0 = <&mcspi2_pins>; | |
441 | }; | |
442 | ||
443 | &uart1 { | |
444 | status = "okay"; | |
445 | pinctrl-names = "default"; | |
446 | pinctrl-0 = <&uart1_pins>; | |
783d3186 | 447 | interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, |
66b04369 | 448 | <&dra7_pmx_core 0x3e0>; |
6e58b8f1 S |
449 | }; |
450 | ||
451 | &uart2 { | |
452 | status = "okay"; | |
453 | pinctrl-names = "default"; | |
454 | pinctrl-0 = <&uart2_pins>; | |
455 | }; | |
456 | ||
457 | &uart3 { | |
458 | status = "okay"; | |
459 | pinctrl-names = "default"; | |
460 | pinctrl-0 = <&uart3_pins>; | |
461 | }; | |
bf1788df B |
462 | |
463 | &mmc1 { | |
464 | status = "okay"; | |
465 | vmmc-supply = <&ldo1_reg>; | |
466 | bus-width = <4>; | |
467 | }; | |
6cf02dbb B |
468 | |
469 | &mmc2 { | |
470 | status = "okay"; | |
471 | vmmc-supply = <&mmc2_3v3>; | |
472 | bus-width = <8>; | |
473 | }; | |
22f1e7ef K |
474 | |
475 | &cpu0 { | |
476 | cpu0-supply = <&smps123_reg>; | |
477 | }; | |
dc2dd5b8 SP |
478 | |
479 | &qspi { | |
480 | status = "okay"; | |
481 | pinctrl-names = "default"; | |
482 | pinctrl-0 = <&qspi1_pins>; | |
483 | ||
484 | spi-max-frequency = <48000000>; | |
485 | m25p80@0 { | |
486 | compatible = "s25fl256s1"; | |
487 | spi-max-frequency = <48000000>; | |
488 | reg = <0>; | |
489 | spi-tx-bus-width = <1>; | |
490 | spi-rx-bus-width = <4>; | |
491 | spi-cpol; | |
492 | spi-cpha; | |
493 | #address-cells = <1>; | |
494 | #size-cells = <1>; | |
495 | ||
496 | /* MTD partition table. | |
497 | * The ROM checks the first four physical blocks | |
498 | * for a valid file to boot and the flash here is | |
499 | * 64KiB block size. | |
500 | */ | |
501 | partition@0 { | |
502 | label = "QSPI.SPL"; | |
503 | reg = <0x00000000 0x000010000>; | |
504 | }; | |
505 | partition@1 { | |
506 | label = "QSPI.SPL.backup1"; | |
507 | reg = <0x00010000 0x00010000>; | |
508 | }; | |
509 | partition@2 { | |
510 | label = "QSPI.SPL.backup2"; | |
511 | reg = <0x00020000 0x00010000>; | |
512 | }; | |
513 | partition@3 { | |
514 | label = "QSPI.SPL.backup3"; | |
515 | reg = <0x00030000 0x00010000>; | |
516 | }; | |
517 | partition@4 { | |
518 | label = "QSPI.u-boot"; | |
519 | reg = <0x00040000 0x00100000>; | |
520 | }; | |
521 | partition@5 { | |
522 | label = "QSPI.u-boot-spl-os"; | |
69d2626f | 523 | reg = <0x00140000 0x00080000>; |
dc2dd5b8 SP |
524 | }; |
525 | partition@6 { | |
526 | label = "QSPI.u-boot-env"; | |
69d2626f | 527 | reg = <0x001c0000 0x00010000>; |
dc2dd5b8 SP |
528 | }; |
529 | partition@7 { | |
530 | label = "QSPI.u-boot-env.backup1"; | |
69d2626f | 531 | reg = <0x001d0000 0x0010000>; |
dc2dd5b8 SP |
532 | }; |
533 | partition@8 { | |
534 | label = "QSPI.kernel"; | |
69d2626f | 535 | reg = <0x001e0000 0x0800000>; |
dc2dd5b8 SP |
536 | }; |
537 | partition@9 { | |
538 | label = "QSPI.file-system"; | |
69d2626f | 539 | reg = <0x009e0000 0x01620000>; |
dc2dd5b8 SP |
540 | }; |
541 | }; | |
542 | }; | |
4b4437cb | 543 | |
a7b0aa19 RQ |
544 | &omap_dwc3_1 { |
545 | extcon = <&extcon_usb1>; | |
546 | }; | |
547 | ||
548 | &omap_dwc3_2 { | |
549 | extcon = <&extcon_usb2>; | |
550 | }; | |
551 | ||
4b4437cb RQ |
552 | &usb1 { |
553 | dr_mode = "peripheral"; | |
554 | pinctrl-names = "default"; | |
555 | pinctrl-0 = <&usb1_pins>; | |
556 | }; | |
557 | ||
558 | &usb2 { | |
559 | dr_mode = "host"; | |
560 | pinctrl-names = "default"; | |
561 | pinctrl-0 = <&usb2_pins>; | |
562 | }; | |
ff66a3c8 MS |
563 | |
564 | &elm { | |
565 | status = "okay"; | |
566 | }; | |
567 | ||
568 | &gpmc { | |
569 | status = "okay"; | |
570 | pinctrl-names = "default"; | |
571 | pinctrl-0 = <&nand_flash_x16>; | |
572 | ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */ | |
573 | nand@0,0 { | |
574 | reg = <0 0 4>; /* device IO registers */ | |
575 | ti,nand-ecc-opt = "bch8"; | |
576 | ti,elm-id = <&elm>; | |
577 | nand-bus-width = <16>; | |
578 | gpmc,device-width = <2>; | |
579 | gpmc,sync-clk-ps = <0>; | |
580 | gpmc,cs-on-ns = <0>; | |
5990047c RQ |
581 | gpmc,cs-rd-off-ns = <80>; |
582 | gpmc,cs-wr-off-ns = <80>; | |
ff66a3c8 | 583 | gpmc,adv-on-ns = <0>; |
5990047c RQ |
584 | gpmc,adv-rd-off-ns = <60>; |
585 | gpmc,adv-wr-off-ns = <60>; | |
586 | gpmc,we-on-ns = <10>; | |
587 | gpmc,we-off-ns = <50>; | |
588 | gpmc,oe-on-ns = <4>; | |
589 | gpmc,oe-off-ns = <40>; | |
590 | gpmc,access-ns = <40>; | |
591 | gpmc,wr-access-ns = <80>; | |
592 | gpmc,rd-cycle-ns = <80>; | |
593 | gpmc,wr-cycle-ns = <80>; | |
ff66a3c8 MS |
594 | gpmc,bus-turnaround-ns = <0>; |
595 | gpmc,cycle2cycle-delay-ns = <0>; | |
596 | gpmc,clk-activation-ns = <0>; | |
597 | gpmc,wait-monitoring-ns = <0>; | |
598 | gpmc,wr-data-mux-bus-ns = <0>; | |
599 | /* MTD partition table */ | |
600 | /* All SPL-* partitions are sized to minimal length | |
601 | * which can be independently programmable. For | |
602 | * NAND flash this is equal to size of erase-block */ | |
603 | #address-cells = <1>; | |
604 | #size-cells = <1>; | |
605 | partition@0 { | |
606 | label = "NAND.SPL"; | |
607 | reg = <0x00000000 0x000020000>; | |
608 | }; | |
609 | partition@1 { | |
610 | label = "NAND.SPL.backup1"; | |
611 | reg = <0x00020000 0x00020000>; | |
612 | }; | |
613 | partition@2 { | |
614 | label = "NAND.SPL.backup2"; | |
615 | reg = <0x00040000 0x00020000>; | |
616 | }; | |
617 | partition@3 { | |
618 | label = "NAND.SPL.backup3"; | |
619 | reg = <0x00060000 0x00020000>; | |
620 | }; | |
621 | partition@4 { | |
622 | label = "NAND.u-boot-spl-os"; | |
623 | reg = <0x00080000 0x00040000>; | |
624 | }; | |
625 | partition@5 { | |
626 | label = "NAND.u-boot"; | |
627 | reg = <0x000c0000 0x00100000>; | |
628 | }; | |
629 | partition@6 { | |
630 | label = "NAND.u-boot-env"; | |
631 | reg = <0x001c0000 0x00020000>; | |
632 | }; | |
633 | partition@7 { | |
f0e9fab3 | 634 | label = "NAND.u-boot-env.backup1"; |
ff66a3c8 MS |
635 | reg = <0x001e0000 0x00020000>; |
636 | }; | |
637 | partition@8 { | |
638 | label = "NAND.kernel"; | |
639 | reg = <0x00200000 0x00800000>; | |
640 | }; | |
641 | partition@9 { | |
642 | label = "NAND.file-system"; | |
643 | reg = <0x00a00000 0x0f600000>; | |
644 | }; | |
645 | }; | |
646 | }; | |
ae28ea88 RQ |
647 | |
648 | &usb2_phy1 { | |
649 | phy-supply = <&ldousb_reg>; | |
650 | }; | |
651 | ||
652 | &usb2_phy2 { | |
653 | phy-supply = <&ldousb_reg>; | |
654 | }; | |
c7cc9ba1 LV |
655 | |
656 | &gpio7 { | |
657 | ti,no-reset-on-init; | |
658 | ti,no-idle-on-init; | |
659 | }; | |
8d039290 M |
660 | |
661 | &mac { | |
662 | status = "okay"; | |
663 | pinctrl-names = "default", "sleep"; | |
664 | pinctrl-0 = <&cpsw_default>; | |
665 | pinctrl-1 = <&cpsw_sleep>; | |
666 | dual_emac; | |
667 | }; | |
668 | ||
669 | &cpsw_emac0 { | |
670 | phy_id = <&davinci_mdio>, <2>; | |
671 | phy-mode = "rgmii"; | |
672 | dual_emac_res_vlan = <1>; | |
673 | }; | |
674 | ||
675 | &cpsw_emac1 { | |
676 | phy_id = <&davinci_mdio>, <3>; | |
677 | phy-mode = "rgmii"; | |
678 | dual_emac_res_vlan = <2>; | |
679 | }; | |
680 | ||
681 | &davinci_mdio { | |
682 | pinctrl-names = "default", "sleep"; | |
683 | pinctrl-0 = <&davinci_mdio_default>; | |
684 | pinctrl-1 = <&davinci_mdio_sleep>; | |
685 | }; | |
b41502e0 RQ |
686 | |
687 | &dcan1 { | |
688 | status = "ok"; | |
2acb5c30 RQ |
689 | pinctrl-names = "default", "sleep", "active"; |
690 | pinctrl-0 = <&dcan1_pins_sleep>; | |
b41502e0 | 691 | pinctrl-1 = <&dcan1_pins_sleep>; |
2acb5c30 | 692 | pinctrl-2 = <&dcan1_pins_default>; |
b41502e0 | 693 | }; |