Commit | Line | Data |
---|---|---|
38b248db RN |
1 | /* |
2 | * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ | |
3 | * | |
4 | * This program is free software; you can redistribute it and/or modify | |
5 | * it under the terms of the GNU General Public License version 2 as | |
6 | * published by the Free Software Foundation. | |
7 | */ | |
8 | /dts-v1/; | |
9 | ||
10 | #include "dra72x.dtsi" | |
f56de327 | 11 | #include <dt-bindings/gpio/gpio.h> |
a8d3b59c | 12 | #include <dt-bindings/clk/ti-dra7-atl.h> |
38b248db RN |
13 | |
14 | / { | |
15 | model = "TI DRA722"; | |
16 | compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7"; | |
17 | ||
18 | memory { | |
19 | device_type = "memory"; | |
20 | reg = <0x80000000 0x40000000>; /* 1024 MB */ | |
21 | }; | |
5b434d7e | 22 | |
fadf0d0b TV |
23 | aliases { |
24 | display0 = &hdmi0; | |
25 | }; | |
26 | ||
5b434d7e NM |
27 | evm_3v3: fixedregulator-evm_3v3 { |
28 | compatible = "regulator-fixed"; | |
29 | regulator-name = "evm_3v3"; | |
30 | regulator-min-microvolt = <3300000>; | |
31 | regulator-max-microvolt = <3300000>; | |
32 | }; | |
f56de327 | 33 | |
61085ee7 PU |
34 | aic_dvdd: fixedregulator-aic_dvdd { |
35 | /* TPS77018DBVT */ | |
36 | compatible = "regulator-fixed"; | |
37 | regulator-name = "aic_dvdd"; | |
38 | vin-supply = <&evm_3v3>; | |
39 | regulator-min-microvolt = <1800000>; | |
40 | regulator-max-microvolt = <1800000>; | |
41 | }; | |
42 | ||
a238707d KVA |
43 | evm_3v3_sd: fixedregulator-sd { |
44 | compatible = "regulator-fixed"; | |
45 | regulator-name = "evm_3v3_sd"; | |
46 | regulator-min-microvolt = <3300000>; | |
47 | regulator-max-microvolt = <3300000>; | |
48 | enable-active-high; | |
49 | gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>; | |
50 | }; | |
51 | ||
f56de327 RQ |
52 | extcon_usb1: extcon_usb1 { |
53 | compatible = "linux,extcon-usb-gpio"; | |
54 | id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; | |
55 | }; | |
56 | ||
57 | extcon_usb2: extcon_usb2 { | |
58 | compatible = "linux,extcon-usb-gpio"; | |
59 | id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; | |
60 | }; | |
fadf0d0b TV |
61 | |
62 | hdmi0: connector { | |
63 | compatible = "hdmi-connector"; | |
64 | label = "hdmi"; | |
65 | ||
66 | type = "a"; | |
67 | ||
68 | port { | |
69 | hdmi_connector_in: endpoint { | |
70 | remote-endpoint = <&tpd12s015_out>; | |
71 | }; | |
72 | }; | |
73 | }; | |
74 | ||
75 | tpd12s015: encoder { | |
76 | compatible = "ti,tpd12s015"; | |
77 | ||
78 | pinctrl-names = "default"; | |
79 | pinctrl-0 = <&tpd12s015_pins>; | |
80 | ||
81 | gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>, /* P4, CT CP HPD */ | |
82 | <&pcf_hdmi 5 GPIO_ACTIVE_HIGH>, /* P5, LS OE */ | |
83 | <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ | |
84 | ||
85 | ports { | |
86 | #address-cells = <1>; | |
87 | #size-cells = <0>; | |
88 | ||
89 | port@0 { | |
90 | reg = <0>; | |
91 | ||
92 | tpd12s015_in: endpoint { | |
93 | remote-endpoint = <&hdmi_out>; | |
94 | }; | |
95 | }; | |
96 | ||
97 | port@1 { | |
98 | reg = <1>; | |
99 | ||
100 | tpd12s015_out: endpoint { | |
101 | remote-endpoint = <&hdmi_connector_in>; | |
102 | }; | |
103 | }; | |
104 | }; | |
105 | }; | |
a8d3b59c PU |
106 | |
107 | sound0: sound@0 { | |
108 | compatible = "simple-audio-card"; | |
109 | simple-audio-card,name = "DRA7xx-EVM"; | |
110 | simple-audio-card,widgets = | |
111 | "Headphone", "Headphone Jack", | |
112 | "Line", "Line Out", | |
113 | "Microphone", "Mic Jack", | |
114 | "Line", "Line In"; | |
115 | simple-audio-card,routing = | |
116 | "Headphone Jack", "HPLOUT", | |
117 | "Headphone Jack", "HPROUT", | |
118 | "Line Out", "LLOUT", | |
119 | "Line Out", "RLOUT", | |
120 | "MIC3L", "Mic Jack", | |
121 | "MIC3R", "Mic Jack", | |
122 | "Mic Jack", "Mic Bias", | |
123 | "LINE1L", "Line In", | |
124 | "LINE1R", "Line In"; | |
125 | simple-audio-card,format = "dsp_b"; | |
126 | simple-audio-card,bitclock-master = <&sound0_master>; | |
127 | simple-audio-card,frame-master = <&sound0_master>; | |
128 | simple-audio-card,bitclock-inversion; | |
129 | ||
130 | sound0_master: simple-audio-card,cpu { | |
131 | sound-dai = <&mcasp3>; | |
132 | system-clock-frequency = <5644800>; | |
133 | }; | |
134 | ||
135 | simple-audio-card,codec { | |
136 | sound-dai = <&tlv320aic3106>; | |
137 | clocks = <&atl_clkin2_ck>; | |
138 | }; | |
139 | }; | |
38b248db RN |
140 | }; |
141 | ||
7e9711aa K |
142 | &dra7_pmx_core { |
143 | i2c1_pins: pinmux_i2c1_pins { | |
144 | pinctrl-single,pins = < | |
145 | 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ | |
146 | 0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ | |
147 | >; | |
148 | }; | |
09d4993c | 149 | |
fadf0d0b TV |
150 | i2c5_pins: pinmux_i2c5_pins { |
151 | pinctrl-single,pins = < | |
152 | 0x2b4 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */ | |
153 | 0x2b8 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */ | |
154 | >; | |
155 | }; | |
156 | ||
6ddd5fce PU |
157 | i2c5_pins: pinmux_i2c5_pins { |
158 | pinctrl-single,pins = < | |
159 | 0x2b4 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */ | |
160 | 0x2b8 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */ | |
161 | >; | |
162 | }; | |
163 | ||
09d4993c RQ |
164 | nand_default: nand_default { |
165 | pinctrl-single,pins = < | |
166 | 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */ | |
167 | 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */ | |
168 | 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */ | |
169 | 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */ | |
170 | 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */ | |
171 | 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */ | |
172 | 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */ | |
173 | 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */ | |
174 | 0x20 (PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */ | |
175 | 0x24 (PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */ | |
176 | 0x28 (PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */ | |
177 | 0x2c (PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */ | |
178 | 0x30 (PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */ | |
179 | 0x34 (PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */ | |
180 | 0x38 (PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */ | |
181 | 0x3c (PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */ | |
182 | 0xb4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */ | |
183 | 0xc4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */ | |
184 | 0xcc (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */ | |
185 | 0xc8 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */ | |
186 | 0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */ | |
187 | 0xd8 (PIN_INPUT | MUX_MODE0) /* gpmc_wait0 */ | |
188 | >; | |
189 | }; | |
95cc6af8 GC |
190 | |
191 | usb1_pins: pinmux_usb1_pins { | |
192 | pinctrl-single,pins = < | |
193 | 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ | |
194 | >; | |
195 | }; | |
196 | ||
197 | usb2_pins: pinmux_usb2_pins { | |
198 | pinctrl-single,pins = < | |
199 | 0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */ | |
200 | >; | |
201 | }; | |
829acd07 NM |
202 | |
203 | tps65917_pins_default: tps65917_pins_default { | |
204 | pinctrl-single,pins = < | |
205 | 0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */ | |
206 | >; | |
207 | }; | |
5b434d7e NM |
208 | |
209 | mmc1_pins_default: mmc1_pins_default { | |
210 | pinctrl-single,pins = < | |
211 | 0x36c (PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ | |
212 | 0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ | |
213 | 0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ | |
214 | 0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ | |
215 | 0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ | |
216 | 0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ | |
217 | 0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ | |
218 | >; | |
219 | }; | |
220 | ||
221 | mmc2_pins_default: mmc2_pins_default { | |
222 | pinctrl-single,pins = < | |
223 | 0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ | |
224 | 0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ | |
225 | 0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ | |
226 | 0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ | |
227 | 0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ | |
228 | 0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ | |
229 | 0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ | |
230 | 0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ | |
231 | 0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ | |
232 | 0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ | |
233 | >; | |
234 | }; | |
ea95af3c RQ |
235 | |
236 | dcan1_pins_default: dcan1_pins_default { | |
237 | pinctrl-single,pins = < | |
d80d581b RQ |
238 | 0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ |
239 | 0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */ | |
ea95af3c RQ |
240 | >; |
241 | }; | |
242 | ||
243 | dcan1_pins_sleep: dcan1_pins_sleep { | |
244 | pinctrl-single,pins = < | |
d80d581b RQ |
245 | 0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ |
246 | 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */ | |
ea95af3c RQ |
247 | >; |
248 | }; | |
1f43c45d M |
249 | |
250 | qspi1_pins: pinmux_qspi1_pins { | |
251 | pinctrl-single,pins = < | |
252 | 0x74 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */ | |
253 | 0x78 (PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */ | |
254 | 0x7c (PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */ | |
255 | 0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */ | |
256 | 0x84 (PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */ | |
257 | 0x88 (PIN_OUTPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */ | |
258 | 0xb8 (PIN_OUTPUT | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */ | |
259 | >; | |
260 | }; | |
fadf0d0b TV |
261 | |
262 | hdmi_pins: pinmux_hdmi_pins { | |
263 | pinctrl-single,pins = < | |
264 | 0x408 (PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */ | |
265 | 0x40c (PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */ | |
266 | >; | |
267 | }; | |
268 | ||
269 | tpd12s015_pins: pinmux_tpd12s015_pins { | |
270 | pinctrl-single,pins = < | |
271 | 0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */ | |
272 | >; | |
273 | }; | |
a8d3b59c PU |
274 | |
275 | atl_pins: pinmux_atl_pins { | |
276 | pinctrl-single,pins = < | |
277 | 0x298 (PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */ | |
278 | 0x29c (PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */ | |
279 | >; | |
280 | }; | |
281 | ||
282 | mcasp3_pins: pinmux_mcasp3_pins { | |
283 | pinctrl-single,pins = < | |
284 | 0x324 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */ | |
285 | 0x328 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */ | |
286 | 0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */ | |
287 | 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */ | |
288 | >; | |
289 | }; | |
290 | ||
291 | mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins { | |
292 | pinctrl-single,pins = < | |
293 | 0x324 (PIN_INPUT_PULLDOWN | MUX_MODE15) | |
294 | 0x328 (PIN_INPUT_PULLDOWN | MUX_MODE15) | |
295 | 0x32c (PIN_INPUT_PULLDOWN | MUX_MODE15) | |
296 | 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE15) | |
297 | >; | |
298 | }; | |
7e9711aa K |
299 | }; |
300 | ||
301 | &i2c1 { | |
302 | status = "okay"; | |
303 | pinctrl-names = "default"; | |
304 | pinctrl-0 = <&i2c1_pins>; | |
305 | clock-frequency = <400000>; | |
b359c426 K |
306 | |
307 | tps65917: tps65917@58 { | |
308 | compatible = "ti,tps65917"; | |
309 | reg = <0x58>; | |
310 | ||
829acd07 NM |
311 | pinctrl-names = "default"; |
312 | pinctrl-0 = <&tps65917_pins_default>; | |
313 | ||
b359c426 | 314 | interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ |
b359c426 K |
315 | interrupt-controller; |
316 | #interrupt-cells = <2>; | |
317 | ||
318 | ti,system-power-controller; | |
319 | ||
320 | tps65917_pmic { | |
321 | compatible = "ti,tps65917-pmic"; | |
322 | ||
323 | regulators { | |
324 | smps1_reg: smps1 { | |
325 | /* VDD_MPU */ | |
326 | regulator-name = "smps1"; | |
327 | regulator-min-microvolt = <850000>; | |
328 | regulator-max-microvolt = <1250000>; | |
329 | regulator-always-on; | |
330 | regulator-boot-on; | |
331 | }; | |
332 | ||
333 | smps2_reg: smps2 { | |
334 | /* VDD_CORE */ | |
335 | regulator-name = "smps2"; | |
336 | regulator-min-microvolt = <850000>; | |
70fcaf92 | 337 | regulator-max-microvolt = <1060000>; |
b359c426 K |
338 | regulator-boot-on; |
339 | regulator-always-on; | |
340 | }; | |
341 | ||
342 | smps3_reg: smps3 { | |
343 | /* VDD_GPU IVA DSPEVE */ | |
344 | regulator-name = "smps3"; | |
345 | regulator-min-microvolt = <850000>; | |
346 | regulator-max-microvolt = <1250000>; | |
347 | regulator-boot-on; | |
348 | regulator-always-on; | |
349 | }; | |
350 | ||
351 | smps4_reg: smps4 { | |
352 | /* VDDS1V8 */ | |
353 | regulator-name = "smps4"; | |
354 | regulator-min-microvolt = <1800000>; | |
355 | regulator-max-microvolt = <1800000>; | |
356 | regulator-always-on; | |
357 | regulator-boot-on; | |
358 | }; | |
359 | ||
360 | smps5_reg: smps5 { | |
361 | /* VDD_DDR */ | |
362 | regulator-name = "smps5"; | |
363 | regulator-min-microvolt = <1350000>; | |
364 | regulator-max-microvolt = <1350000>; | |
365 | regulator-boot-on; | |
366 | regulator-always-on; | |
367 | }; | |
368 | ||
369 | ldo1_reg: ldo1 { | |
370 | /* LDO1_OUT --> SDIO */ | |
371 | regulator-name = "ldo1"; | |
372 | regulator-min-microvolt = <1800000>; | |
373 | regulator-max-microvolt = <3300000>; | |
d62ce9ff | 374 | regulator-always-on; |
b359c426 K |
375 | regulator-boot-on; |
376 | }; | |
377 | ||
378 | ldo2_reg: ldo2 { | |
379 | /* LDO2_OUT --> TP1017 (UNUSED) */ | |
380 | regulator-name = "ldo2"; | |
381 | regulator-min-microvolt = <1800000>; | |
382 | regulator-max-microvolt = <3300000>; | |
383 | }; | |
384 | ||
385 | ldo3_reg: ldo3 { | |
386 | /* VDDA_1V8_PHY */ | |
387 | regulator-name = "ldo3"; | |
388 | regulator-min-microvolt = <1800000>; | |
389 | regulator-max-microvolt = <1800000>; | |
390 | regulator-boot-on; | |
391 | regulator-always-on; | |
392 | }; | |
393 | ||
394 | ldo5_reg: ldo5 { | |
395 | /* VDDA_1V8_PLL */ | |
396 | regulator-name = "ldo5"; | |
397 | regulator-min-microvolt = <1800000>; | |
398 | regulator-max-microvolt = <1800000>; | |
399 | regulator-always-on; | |
400 | regulator-boot-on; | |
401 | }; | |
402 | ||
403 | ldo4_reg: ldo4 { | |
404 | /* VDDA_3V_USB: VDDA_USBHS33 */ | |
405 | regulator-name = "ldo4"; | |
406 | regulator-min-microvolt = <3300000>; | |
407 | regulator-max-microvolt = <3300000>; | |
408 | regulator-boot-on; | |
409 | }; | |
410 | }; | |
411 | }; | |
ab1d3c84 NM |
412 | |
413 | tps65917_power_button { | |
414 | compatible = "ti,palmas-pwrbutton"; | |
415 | interrupt-parent = <&tps65917>; | |
416 | interrupts = <1 IRQ_TYPE_NONE>; | |
417 | wakeup-source; | |
418 | ti,palmas-long-press-seconds = <6>; | |
419 | }; | |
b359c426 | 420 | }; |
f56de327 RQ |
421 | |
422 | pcf_gpio_21: gpio@21 { | |
423 | compatible = "ti,pcf8575"; | |
424 | reg = <0x21>; | |
425 | lines-initial-states = <0x1408>; | |
426 | gpio-controller; | |
427 | #gpio-cells = <2>; | |
428 | interrupt-parent = <&gpio6>; | |
429 | interrupts = <11 IRQ_TYPE_EDGE_FALLING>; | |
430 | interrupt-controller; | |
431 | #interrupt-cells = <2>; | |
432 | }; | |
a8d3b59c PU |
433 | |
434 | tlv320aic3106: tlv320aic3106@19 { | |
435 | #sound-dai-cells = <0>; | |
436 | compatible = "ti,tlv320aic3106"; | |
437 | reg = <0x19>; | |
438 | adc-settle-ms = <40>; | |
439 | ai3x-micbias-vg = <1>; /* 2.0V */ | |
440 | status = "okay"; | |
441 | ||
442 | /* Regulators */ | |
443 | AVDD-supply = <&evm_3v3>; | |
444 | IOVDD-supply = <&evm_3v3>; | |
445 | DRVDD-supply = <&evm_3v3>; | |
446 | DVDD-supply = <&aic_dvdd>; | |
447 | }; | |
7e9711aa K |
448 | }; |
449 | ||
fadf0d0b TV |
450 | &i2c5 { |
451 | status = "okay"; | |
452 | pinctrl-names = "default"; | |
453 | pinctrl-0 = <&i2c5_pins>; | |
454 | clock-frequency = <400000>; | |
455 | ||
456 | pcf_hdmi: pcf8575@26 { | |
457 | compatible = "nxp,pcf8575"; | |
458 | reg = <0x26>; | |
459 | gpio-controller; | |
460 | #gpio-cells = <2>; | |
461 | /* | |
462 | * initial state is used here to keep the mdio interface | |
463 | * selected on RU89 through SEL_VIN4_MUX_S0, VIN2_S1 and | |
464 | * VIN2_S0 driven high otherwise Ethernet stops working | |
465 | * VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6 | |
466 | */ | |
467 | lines-initial-states = <0x0f2b>; | |
6ddd5fce PU |
468 | |
469 | p1 { | |
470 | /* vin6_sel_s0: high: VIN6, low: audio */ | |
471 | gpio-hog; | |
472 | gpios = <1 GPIO_ACTIVE_HIGH>; | |
473 | output-low; | |
474 | line-name = "vin6_sel_s0"; | |
475 | }; | |
fadf0d0b TV |
476 | }; |
477 | }; | |
478 | ||
38b248db RN |
479 | &uart1 { |
480 | status = "okay"; | |
481 | }; | |
09d4993c RQ |
482 | |
483 | &elm { | |
484 | status = "okay"; | |
485 | }; | |
486 | ||
487 | &gpmc { | |
488 | status = "okay"; | |
489 | pinctrl-names = "default"; | |
490 | pinctrl-0 = <&nand_default>; | |
491 | ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */ | |
492 | nand@0,0 { | |
493 | /* To use NAND, DIP switch SW5 must be set like so: | |
494 | * SW5.1 (NAND_SELn) = ON (LOW) | |
495 | * SW5.9 (GPMC_WPN) = OFF (HIGH) | |
496 | */ | |
497 | reg = <0 0 4>; /* device IO registers */ | |
498 | ti,nand-ecc-opt = "bch8"; | |
499 | ti,elm-id = <&elm>; | |
500 | nand-bus-width = <16>; | |
501 | gpmc,device-width = <2>; | |
502 | gpmc,sync-clk-ps = <0>; | |
503 | gpmc,cs-on-ns = <0>; | |
504 | gpmc,cs-rd-off-ns = <80>; | |
505 | gpmc,cs-wr-off-ns = <80>; | |
506 | gpmc,adv-on-ns = <0>; | |
507 | gpmc,adv-rd-off-ns = <60>; | |
508 | gpmc,adv-wr-off-ns = <60>; | |
509 | gpmc,we-on-ns = <10>; | |
510 | gpmc,we-off-ns = <50>; | |
511 | gpmc,oe-on-ns = <4>; | |
512 | gpmc,oe-off-ns = <40>; | |
513 | gpmc,access-ns = <40>; | |
514 | gpmc,wr-access-ns = <80>; | |
515 | gpmc,rd-cycle-ns = <80>; | |
516 | gpmc,wr-cycle-ns = <80>; | |
517 | gpmc,bus-turnaround-ns = <0>; | |
518 | gpmc,cycle2cycle-delay-ns = <0>; | |
519 | gpmc,clk-activation-ns = <0>; | |
520 | gpmc,wait-monitoring-ns = <0>; | |
521 | gpmc,wr-data-mux-bus-ns = <0>; | |
522 | /* MTD partition table */ | |
523 | /* All SPL-* partitions are sized to minimal length | |
524 | * which can be independently programmable. For | |
525 | * NAND flash this is equal to size of erase-block */ | |
526 | #address-cells = <1>; | |
527 | #size-cells = <1>; | |
528 | partition@0 { | |
529 | label = "NAND.SPL"; | |
530 | reg = <0x00000000 0x000020000>; | |
531 | }; | |
532 | partition@1 { | |
533 | label = "NAND.SPL.backup1"; | |
534 | reg = <0x00020000 0x00020000>; | |
535 | }; | |
536 | partition@2 { | |
537 | label = "NAND.SPL.backup2"; | |
538 | reg = <0x00040000 0x00020000>; | |
539 | }; | |
540 | partition@3 { | |
541 | label = "NAND.SPL.backup3"; | |
542 | reg = <0x00060000 0x00020000>; | |
543 | }; | |
544 | partition@4 { | |
545 | label = "NAND.u-boot-spl-os"; | |
546 | reg = <0x00080000 0x00040000>; | |
547 | }; | |
548 | partition@5 { | |
549 | label = "NAND.u-boot"; | |
550 | reg = <0x000c0000 0x00100000>; | |
551 | }; | |
552 | partition@6 { | |
553 | label = "NAND.u-boot-env"; | |
554 | reg = <0x001c0000 0x00020000>; | |
555 | }; | |
556 | partition@7 { | |
557 | label = "NAND.u-boot-env.backup1"; | |
558 | reg = <0x001e0000 0x00020000>; | |
559 | }; | |
560 | partition@8 { | |
561 | label = "NAND.kernel"; | |
562 | reg = <0x00200000 0x00800000>; | |
563 | }; | |
564 | partition@9 { | |
565 | label = "NAND.file-system"; | |
566 | reg = <0x00a00000 0x0f600000>; | |
567 | }; | |
568 | }; | |
569 | }; | |
95cc6af8 | 570 | |
7a15c8e7 RQ |
571 | &usb2_phy1 { |
572 | phy-supply = <&ldo4_reg>; | |
573 | }; | |
574 | ||
575 | &usb2_phy2 { | |
576 | phy-supply = <&ldo4_reg>; | |
577 | }; | |
578 | ||
a7b0aa19 RQ |
579 | &omap_dwc3_1 { |
580 | extcon = <&extcon_usb1>; | |
581 | }; | |
582 | ||
583 | &omap_dwc3_2 { | |
584 | extcon = <&extcon_usb2>; | |
585 | }; | |
586 | ||
95cc6af8 GC |
587 | &usb1 { |
588 | dr_mode = "peripheral"; | |
589 | pinctrl-names = "default"; | |
590 | pinctrl-0 = <&usb1_pins>; | |
591 | }; | |
592 | ||
593 | &usb2 { | |
594 | dr_mode = "host"; | |
595 | pinctrl-names = "default"; | |
596 | pinctrl-0 = <&usb2_pins>; | |
597 | }; | |
5b434d7e NM |
598 | |
599 | &mmc1 { | |
600 | status = "okay"; | |
601 | pinctrl-names = "default"; | |
602 | pinctrl-0 = <&mmc1_pins_default>; | |
a238707d KVA |
603 | vmmc-supply = <&evm_3v3_sd>; |
604 | vmmc_aux-supply = <&ldo1_reg>; | |
5b434d7e NM |
605 | bus-width = <4>; |
606 | /* | |
607 | * SDCD signal is not being used here - using the fact that GPIO mode | |
608 | * is a viable alternative | |
609 | */ | |
267068d8 | 610 | cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; |
e23b27db | 611 | max-frequency = <192000000>; |
5b434d7e NM |
612 | }; |
613 | ||
614 | &mmc2 { | |
615 | /* SW5-3 in ON position */ | |
616 | status = "okay"; | |
617 | pinctrl-names = "default"; | |
618 | pinctrl-0 = <&mmc2_pins_default>; | |
619 | ||
620 | vmmc-supply = <&evm_3v3>; | |
621 | bus-width = <8>; | |
622 | ti,non-removable; | |
e23b27db | 623 | max-frequency = <192000000>; |
5b434d7e | 624 | }; |
d5475152 M |
625 | |
626 | &dra7_pmx_core { | |
627 | cpsw_default: cpsw_default { | |
628 | pinctrl-single,pins = < | |
629 | /* Slave 2 */ | |
630 | 0x198 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */ | |
631 | 0x19c (PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */ | |
632 | 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */ | |
633 | 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */ | |
634 | 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */ | |
635 | 0x1ac (PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */ | |
636 | 0x1b0 (PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */ | |
637 | 0x1b4 (PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */ | |
638 | 0x1b8 (PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */ | |
639 | 0x1bc (PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */ | |
640 | 0x1c0 (PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */ | |
641 | 0x1c4 (PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ | |
642 | >; | |
643 | ||
644 | }; | |
645 | ||
646 | cpsw_sleep: cpsw_sleep { | |
647 | pinctrl-single,pins = < | |
648 | /* Slave 2 */ | |
649 | 0x198 (MUX_MODE15) | |
650 | 0x19c (MUX_MODE15) | |
651 | 0x1a0 (MUX_MODE15) | |
652 | 0x1a4 (MUX_MODE15) | |
653 | 0x1a8 (MUX_MODE15) | |
654 | 0x1ac (MUX_MODE15) | |
655 | 0x1b0 (MUX_MODE15) | |
656 | 0x1b4 (MUX_MODE15) | |
657 | 0x1b8 (MUX_MODE15) | |
658 | 0x1bc (MUX_MODE15) | |
659 | 0x1c0 (MUX_MODE15) | |
660 | 0x1c4 (MUX_MODE15) | |
661 | >; | |
662 | }; | |
663 | ||
664 | davinci_mdio_default: davinci_mdio_default { | |
665 | pinctrl-single,pins = < | |
666 | /* MDIO */ | |
667 | 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */ | |
668 | 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ | |
669 | >; | |
670 | }; | |
671 | ||
672 | davinci_mdio_sleep: davinci_mdio_sleep { | |
673 | pinctrl-single,pins = < | |
674 | 0x23c (MUX_MODE15) | |
675 | 0x240 (MUX_MODE15) | |
676 | >; | |
677 | }; | |
678 | }; | |
679 | ||
680 | &mac { | |
681 | status = "okay"; | |
682 | pinctrl-names = "default", "sleep"; | |
683 | pinctrl-0 = <&cpsw_default>; | |
684 | pinctrl-1 = <&cpsw_sleep>; | |
ad548430 | 685 | slaves = <1>; |
36958598 | 686 | mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_HIGH>; |
d5475152 M |
687 | }; |
688 | ||
ad548430 | 689 | &cpsw_emac0 { |
d5475152 M |
690 | phy_id = <&davinci_mdio>, <3>; |
691 | phy-mode = "rgmii"; | |
692 | }; | |
693 | ||
694 | &davinci_mdio { | |
695 | pinctrl-names = "default", "sleep"; | |
696 | pinctrl-0 = <&davinci_mdio_default>; | |
697 | pinctrl-1 = <&davinci_mdio_sleep>; | |
d5475152 | 698 | }; |
ea95af3c RQ |
699 | |
700 | &dcan1 { | |
701 | status = "ok"; | |
2acb5c30 RQ |
702 | pinctrl-names = "default", "sleep", "active"; |
703 | pinctrl-0 = <&dcan1_pins_sleep>; | |
ea95af3c | 704 | pinctrl-1 = <&dcan1_pins_sleep>; |
2acb5c30 | 705 | pinctrl-2 = <&dcan1_pins_default>; |
ea95af3c | 706 | }; |
1f43c45d M |
707 | |
708 | &qspi { | |
709 | status = "okay"; | |
710 | pinctrl-names = "default"; | |
711 | pinctrl-0 = <&qspi1_pins>; | |
712 | ||
713 | spi-max-frequency = <48000000>; | |
714 | m25p80@0 { | |
715 | compatible = "s25fl256s1"; | |
716 | spi-max-frequency = <48000000>; | |
717 | reg = <0>; | |
718 | spi-tx-bus-width = <1>; | |
719 | spi-rx-bus-width = <4>; | |
720 | spi-cpol; | |
721 | spi-cpha; | |
722 | #address-cells = <1>; | |
723 | #size-cells = <1>; | |
724 | ||
725 | /* MTD partition table. | |
726 | * The ROM checks the first four physical blocks | |
727 | * for a valid file to boot and the flash here is | |
728 | * 64KiB block size. | |
729 | */ | |
730 | partition@0 { | |
731 | label = "QSPI.SPL"; | |
732 | reg = <0x00000000 0x000010000>; | |
733 | }; | |
734 | partition@1 { | |
735 | label = "QSPI.SPL.backup1"; | |
736 | reg = <0x00010000 0x00010000>; | |
737 | }; | |
738 | partition@2 { | |
739 | label = "QSPI.SPL.backup2"; | |
740 | reg = <0x00020000 0x00010000>; | |
741 | }; | |
742 | partition@3 { | |
743 | label = "QSPI.SPL.backup3"; | |
744 | reg = <0x00030000 0x00010000>; | |
745 | }; | |
746 | partition@4 { | |
747 | label = "QSPI.u-boot"; | |
748 | reg = <0x00040000 0x00100000>; | |
749 | }; | |
750 | partition@5 { | |
751 | label = "QSPI.u-boot-spl-os"; | |
752 | reg = <0x00140000 0x00080000>; | |
753 | }; | |
754 | partition@6 { | |
755 | label = "QSPI.u-boot-env"; | |
756 | reg = <0x001c0000 0x00010000>; | |
757 | }; | |
758 | partition@7 { | |
759 | label = "QSPI.u-boot-env.backup1"; | |
760 | reg = <0x001d0000 0x0010000>; | |
761 | }; | |
762 | partition@8 { | |
763 | label = "QSPI.kernel"; | |
764 | reg = <0x001e0000 0x0800000>; | |
765 | }; | |
766 | partition@9 { | |
767 | label = "QSPI.file-system"; | |
768 | reg = <0x009e0000 0x01620000>; | |
769 | }; | |
770 | }; | |
771 | }; | |
fadf0d0b TV |
772 | |
773 | &dss { | |
774 | status = "ok"; | |
775 | ||
776 | vdda_video-supply = <&ldo5_reg>; | |
777 | }; | |
778 | ||
779 | &hdmi { | |
780 | status = "ok"; | |
781 | vdda-supply = <&ldo3_reg>; | |
782 | ||
783 | pinctrl-names = "default"; | |
784 | pinctrl-0 = <&hdmi_pins>; | |
785 | ||
786 | port { | |
787 | hdmi_out: endpoint { | |
788 | remote-endpoint = <&tpd12s015_in>; | |
789 | }; | |
790 | }; | |
791 | }; | |
a8d3b59c PU |
792 | |
793 | &atl { | |
794 | pinctrl-names = "default"; | |
795 | pinctrl-0 = <&atl_pins>; | |
796 | ||
797 | assigned-clocks = <&abe_dpll_sys_clk_mux>, | |
798 | <&atl_gfclk_mux>, | |
799 | <&dpll_abe_ck>, | |
800 | <&dpll_abe_m2x2_ck>, | |
801 | <&atl_clkin2_ck>; | |
802 | assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>; | |
803 | assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>; | |
804 | ||
805 | status = "okay"; | |
806 | ||
807 | atl2 { | |
808 | bws = <DRA7_ATL_WS_MCASP2_FSX>; | |
809 | aws = <DRA7_ATL_WS_MCASP3_FSX>; | |
810 | }; | |
811 | }; | |
812 | ||
813 | &mcasp3 { | |
814 | #sound-dai-cells = <0>; | |
815 | pinctrl-names = "default", "sleep"; | |
816 | pinctrl-0 = <&mcasp3_pins>; | |
817 | pinctrl-1 = <&mcasp3_sleep_pins>; | |
818 | ||
819 | assigned-clocks = <&mcasp3_ahclkx_mux>; | |
820 | assigned-clock-parents = <&atl_clkin2_ck>; | |
821 | ||
822 | status = "okay"; | |
823 | ||
824 | op-mode = <0>; /* MCASP_IIS_MODE */ | |
825 | tdm-slots = <2>; | |
826 | /* 4 serializer */ | |
827 | serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ | |
828 | 1 2 0 0 | |
829 | >; | |
830 | }; | |
43914a35 SA |
831 | |
832 | &mailbox5 { | |
833 | status = "okay"; | |
834 | mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { | |
835 | status = "okay"; | |
836 | }; | |
837 | mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { | |
838 | status = "okay"; | |
839 | }; | |
840 | }; | |
841 | ||
842 | &mailbox6 { | |
843 | status = "okay"; | |
844 | mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { | |
845 | status = "okay"; | |
846 | }; | |
847 | }; |