Commit | Line | Data |
---|---|---|
46e6b3aa AS |
1 | /* |
2 | * The code contained herein is licensed under the GNU General Public | |
3 | * License. You may obtain a copy of the GNU General Public License | |
4 | * Version 2 or later at the following locations: | |
5 | */ | |
6 | ||
7 | /dts-v1/; | |
8 | ||
9 | #include "skeleton.dtsi" | |
10 | ||
11 | #include <dt-bindings/clock/clps711x-clock.h> | |
12 | ||
13 | / { | |
14 | model = "Cirrus Logic EP7209"; | |
15 | compatible = "cirrus,ep7209"; | |
16 | ||
17 | aliases { | |
18 | gpio0 = &porta; | |
19 | gpio1 = &portb; | |
20 | gpio3 = &portd; | |
21 | gpio4 = &porte; | |
22 | serial0 = &uart1; | |
23 | serial1 = &uart2; | |
24 | spi0 = &spi; | |
25 | timer0 = &timer1; | |
26 | timer1 = &timer2; | |
27 | }; | |
28 | ||
29 | cpus { | |
30 | #address-cells = <0>; | |
31 | #size-cells = <0>; | |
32 | ||
33 | cpu { | |
34 | device_type = "cpu"; | |
35 | compatible = "arm,arm720t"; | |
36 | }; | |
37 | }; | |
38 | ||
39 | soc { | |
40 | #address-cells = <1>; | |
41 | #size-cells = <1>; | |
42 | compatible = "simple-bus"; | |
43 | interrupt-parent = <&intc>; | |
44 | ranges; | |
45 | ||
46 | clks: clks@80000000 { | |
47 | #clock-cells = <1>; | |
48 | compatible = "cirrus,ep7209-clk"; | |
49 | reg = <0x80000000 0xc000>; | |
50 | startup-frequency = <73728000>; | |
51 | }; | |
52 | ||
53 | intc: intc@80000000 { | |
54 | compatible = "cirrus,ep7209-intc"; | |
55 | reg = <0x80000000 0x4000>; | |
56 | interrupt-controller; | |
57 | #interrupt-cells = <1>; | |
58 | }; | |
59 | ||
60 | porta: gpio@80000000 { | |
61 | compatible = "cirrus,ep7209-gpio"; | |
62 | reg = <0x80000000 0x1 0x80000040 0x1>; | |
63 | gpio-controller; | |
64 | #gpio-cells = <2>; | |
65 | }; | |
66 | ||
67 | portb: gpio@80000001 { | |
68 | compatible = "cirrus,ep7209-gpio"; | |
69 | reg = <0x80000001 0x1 0x80000041 0x1>; | |
70 | gpio-controller; | |
71 | #gpio-cells = <2>; | |
72 | }; | |
73 | ||
74 | portd: gpio@80000003 { | |
75 | compatible = "cirrus,ep7209-gpio"; | |
76 | reg = <0x80000003 0x1 0x80000043 0x1>; | |
77 | gpio-controller; | |
78 | #gpio-cells = <2>; | |
79 | }; | |
80 | ||
81 | porte: gpio@80000083 { | |
82 | compatible = "cirrus,ep7209-gpio"; | |
83 | reg = <0x80000083 0x1 0x800000c3 0x1>; | |
84 | gpio-controller; | |
85 | #gpio-cells = <2>; | |
86 | }; | |
87 | ||
88 | syscon1: syscon@80000100 { | |
89 | compatible = "cirrus,ep7209-syscon1", "syscon"; | |
90 | reg = <0x80000100 0x80>; | |
91 | }; | |
92 | ||
93 | bus: bus@80000180 { | |
94 | #address-cells = <2>; | |
95 | #size-cells = <1>; | |
96 | compatible = "cirrus,ep7209-bus", "simple-bus"; | |
97 | clocks = <&clks CLPS711X_CLK_BUS>; | |
98 | reg = <0x80000180 0x80>; | |
99 | ranges = < | |
100 | 0 0 0x00000000 0x10000000 | |
101 | 1 0 0x10000000 0x10000000 | |
102 | 2 0 0x20000000 0x10000000 | |
103 | 3 0 0x30000000 0x10000000 | |
104 | 4 0 0x40000000 0x10000000 | |
105 | 5 0 0x50000000 0x10000000 | |
106 | 6 0 0x60000000 0x0000c000 | |
107 | 7 0 0x70000000 0x00000080 | |
108 | >; | |
109 | }; | |
110 | ||
111 | fb: fb@800002c0 { | |
112 | compatible = "cirrus,ep7209-fb"; | |
113 | reg = <0x800002c0 0xd44>, <0x60000000 0xc000>; | |
114 | clocks = <&clks CLPS711X_CLK_BUS>; | |
115 | status = "disabled"; | |
116 | }; | |
117 | ||
118 | timer1: timer@80000300 { | |
119 | compatible = "cirrus,ep7209-timer"; | |
120 | reg = <0x80000300 0x4>; | |
121 | clocks = <&clks CLPS711X_CLK_TIMER1>; | |
122 | interrupts = <8>; | |
123 | }; | |
124 | ||
125 | timer2: timer@80000340 { | |
126 | compatible = "cirrus,ep7209-timer"; | |
127 | reg = <0x80000340 0x4>; | |
128 | clocks = <&clks CLPS711X_CLK_TIMER2>; | |
129 | interrupts = <9>; | |
130 | }; | |
131 | ||
132 | pwm: pwm@80000400 { | |
133 | compatible = "cirrus,ep7209-pwm"; | |
134 | reg = <0x80000400 0x4>; | |
135 | clocks = <&clks CLPS711X_CLK_PWM>; | |
136 | #pwm-cells = <1>; | |
137 | }; | |
138 | ||
139 | uart1: uart@80000480 { | |
140 | compatible = "cirrus,ep7209-uart"; | |
141 | reg = <0x80000480 0x80>; | |
142 | interrupts = <12 13>; | |
143 | clocks = <&clks CLPS711X_CLK_UART>; | |
144 | syscon = <&syscon1>; | |
145 | }; | |
146 | ||
147 | spi: spi@80000500 { | |
148 | #address-cells = <1>; | |
149 | #size-cells = <0>; | |
150 | compatible = "cirrus,ep7209-spi"; | |
151 | reg = <0x80000500 0x4>; | |
152 | interrupts = <15>; | |
153 | clocks = <&clks CLPS711X_CLK_SPI>; | |
154 | status = "disabled"; | |
155 | }; | |
156 | ||
157 | syscon2: syscon@80001100 { | |
158 | compatible = "cirrus,ep7209-syscon2", "syscon"; | |
159 | reg = <0x80001100 0x80>; | |
160 | }; | |
161 | ||
162 | uart2: uart@80001480 { | |
163 | compatible = "cirrus,ep7209-uart"; | |
164 | reg = <0x80001480 0x80>; | |
165 | interrupts = <28 29>; | |
166 | clocks = <&clks CLPS711X_CLK_UART>; | |
167 | syscon = <&syscon2>; | |
168 | }; | |
169 | ||
170 | dai: dai@80002000 { | |
171 | #sound-dai-cells = <0>; | |
172 | compatible = "cirrus,ep7209-dai"; | |
173 | reg = <0x80002000 0x604>; | |
174 | clocks = <&clks CLPS711X_CLK_PLL>; | |
175 | clock-names = "pll"; | |
176 | interrupts = <32>; | |
177 | status = "disabled"; | |
178 | }; | |
179 | ||
180 | syscon3: syscon@80002200 { | |
181 | compatible = "cirrus,ep7209-syscon3", "syscon"; | |
182 | reg = <0x80002200 0x40>; | |
183 | }; | |
184 | }; | |
185 | ||
186 | mctrl: mctrl { | |
187 | compatible = "cirrus,ep7209-mctrl-gpio"; | |
188 | gpio-controller; | |
189 | #gpio-cells = <2>; | |
190 | }; | |
191 | }; |