Commit | Line | Data |
---|---|---|
ec601ff3 MS |
1 | /* |
2 | * Common definition for Hardkernel's Exynos4412 based ODROID-X/X2/U2/U3 boards | |
3 | * device tree source | |
4 | * | |
5 | * This program is free software; you can redistribute it and/or modify | |
6 | * it under the terms of the GNU General Public License version 2 as | |
7 | * published by the Free Software Foundation. | |
8 | */ | |
9 | ||
081a15e3 | 10 | #include <dt-bindings/input/input.h> |
ec601ff3 MS |
11 | #include "exynos4412.dtsi" |
12 | ||
13 | / { | |
14 | firmware@0204F000 { | |
15 | compatible = "samsung,secure-firmware"; | |
16 | reg = <0x0204F000 0x1000>; | |
17 | }; | |
18 | ||
081a15e3 MS |
19 | gpio_keys { |
20 | compatible = "gpio-keys"; | |
21 | pinctrl-names = "default"; | |
22 | pinctrl-0 = <&gpio_power_key>; | |
23 | ||
24 | power_key { | |
25 | interrupt-parent = <&gpx1>; | |
26 | interrupts = <3 0>; | |
27 | gpios = <&gpx1 3 1>; | |
28 | linux,code = <KEY_POWER>; | |
29 | label = "power key"; | |
30 | debounce-interval = <10>; | |
31 | gpio-key,wakeup; | |
32 | }; | |
33 | }; | |
34 | ||
5a852743 SN |
35 | i2s0: i2s@03830000 { |
36 | pinctrl-0 = <&i2s0_bus>; | |
37 | pinctrl-names = "default"; | |
38 | status = "okay"; | |
39 | clocks = <&clock_audss EXYNOS_I2S_BUS>, | |
40 | <&clock_audss EXYNOS_DOUT_AUD_BUS>; | |
41 | clock-names = "iis", "i2s_opclk0"; | |
42 | }; | |
43 | ||
44 | sound: sound { | |
45 | compatible = "samsung,odroidx2-audio"; | |
46 | samsung,i2s-controller = <&i2s0>; | |
47 | samsung,audio-codec = <&max98090>; | |
48 | }; | |
49 | ||
ec601ff3 MS |
50 | mmc@12550000 { |
51 | pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; | |
52 | pinctrl-names = "default"; | |
53 | vmmc-supply = <&ldo20_reg &buck8_reg>; | |
54 | status = "okay"; | |
55 | ||
56 | num-slots = <1>; | |
ec601ff3 MS |
57 | broken-cd; |
58 | card-detect-delay = <200>; | |
59 | samsung,dw-mshc-ciu-div = <3>; | |
60 | samsung,dw-mshc-sdr-timing = <2 3>; | |
61 | samsung,dw-mshc-ddr-timing = <1 2>; | |
aaa25a5a JC |
62 | bus-width = <8>; |
63 | cap-mmc-highspeed; | |
ec601ff3 MS |
64 | }; |
65 | ||
66 | watchdog@10060000 { | |
67 | status = "okay"; | |
68 | }; | |
69 | ||
70 | rtc@10070000 { | |
71 | status = "okay"; | |
72 | }; | |
73 | ||
74 | g2d@10800000 { | |
75 | status = "okay"; | |
76 | }; | |
77 | ||
78 | camera { | |
79 | status = "okay"; | |
80 | pinctrl-names = "default"; | |
81 | pinctrl-0 = <>; | |
82 | ||
83 | fimc_0: fimc@11800000 { | |
84 | status = "okay"; | |
85 | }; | |
86 | ||
87 | fimc_1: fimc@11810000 { | |
88 | status = "okay"; | |
89 | }; | |
90 | ||
91 | fimc_2: fimc@11820000 { | |
92 | status = "okay"; | |
93 | }; | |
94 | ||
95 | fimc_3: fimc@11830000 { | |
96 | status = "okay"; | |
97 | }; | |
98 | }; | |
99 | ||
100 | sdhci@12530000 { | |
101 | bus-width = <4>; | |
102 | pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; | |
103 | pinctrl-names = "default"; | |
104 | vmmc-supply = <&ldo4_reg &ldo21_reg>; | |
78f54db1 MS |
105 | cd-gpios = <&gpk2 2 0>; |
106 | cd-inverted; | |
ec601ff3 MS |
107 | status = "okay"; |
108 | }; | |
109 | ||
110 | serial@13800000 { | |
111 | status = "okay"; | |
112 | }; | |
113 | ||
114 | serial@13810000 { | |
115 | status = "okay"; | |
116 | }; | |
117 | ||
118 | fixed-rate-clocks { | |
119 | xxti { | |
120 | compatible = "samsung,clock-xxti"; | |
121 | clock-frequency = <0>; | |
122 | }; | |
123 | ||
124 | xusbxti { | |
125 | compatible = "samsung,clock-xusbxti"; | |
126 | clock-frequency = <24000000>; | |
127 | }; | |
128 | }; | |
129 | ||
130 | i2c@13860000 { | |
131 | pinctrl-0 = <&i2c0_bus>; | |
132 | pinctrl-names = "default"; | |
cc3fe7ab DD |
133 | samsung,i2c-sda-delay = <100>; |
134 | samsung,i2c-max-bus-freq = <400000>; | |
ec601ff3 MS |
135 | status = "okay"; |
136 | ||
137 | usb3503: usb3503@08 { | |
138 | compatible = "smsc,usb3503"; | |
139 | reg = <0x08>; | |
140 | ||
141 | intn-gpios = <&gpx3 0 0>; | |
142 | connect-gpios = <&gpx3 4 0>; | |
143 | reset-gpios = <&gpx3 5 0>; | |
144 | initial-mode = <1>; | |
145 | }; | |
146 | ||
147 | max77686: pmic@09 { | |
148 | compatible = "maxim,max77686"; | |
eea6653a DD |
149 | interrupt-parent = <&gpx3>; |
150 | interrupts = <2 0>; | |
151 | pinctrl-names = "default"; | |
152 | pinctrl-0 = <&max77686_irq>; | |
ec601ff3 MS |
153 | reg = <0x09>; |
154 | #clock-cells = <1>; | |
155 | ||
156 | voltage-regulators { | |
157 | ldo1_reg: LDO1 { | |
158 | regulator-name = "VDD_ALIVE_1.0V"; | |
159 | regulator-min-microvolt = <1000000>; | |
160 | regulator-max-microvolt = <1000000>; | |
161 | regulator-always-on; | |
162 | }; | |
163 | ||
164 | ldo2_reg: LDO2 { | |
165 | regulator-name = "VDDQ_M1_2_1.8V"; | |
166 | regulator-min-microvolt = <1800000>; | |
167 | regulator-max-microvolt = <1800000>; | |
168 | regulator-always-on; | |
169 | }; | |
170 | ||
171 | ldo3_reg: LDO3 { | |
172 | regulator-name = "VDDQ_EXT_1.8V"; | |
173 | regulator-min-microvolt = <1800000>; | |
174 | regulator-max-microvolt = <1800000>; | |
175 | regulator-always-on; | |
176 | }; | |
177 | ||
178 | ldo4_reg: LDO4 { | |
179 | regulator-name = "VDDQ_MMC2_2.8V"; | |
180 | regulator-min-microvolt = <2800000>; | |
181 | regulator-max-microvolt = <2800000>; | |
182 | regulator-always-on; | |
183 | regulator-boot-on; | |
184 | }; | |
185 | ||
186 | ldo5_reg: LDO5 { | |
187 | regulator-name = "VDDQ_MMC1_3_1.8V"; | |
188 | regulator-min-microvolt = <1800000>; | |
189 | regulator-max-microvolt = <1800000>; | |
190 | regulator-always-on; | |
191 | regulator-boot-on; | |
192 | }; | |
193 | ||
194 | ldo6_reg: LDO6 { | |
195 | regulator-name = "VDD10_MPLL_1.0V"; | |
196 | regulator-min-microvolt = <1000000>; | |
197 | regulator-max-microvolt = <1000000>; | |
198 | regulator-always-on; | |
199 | }; | |
200 | ||
201 | ldo7_reg: LDO7 { | |
202 | regulator-name = "VDD10_XPLL_1.0V"; | |
203 | regulator-min-microvolt = <1000000>; | |
204 | regulator-max-microvolt = <1000000>; | |
205 | regulator-always-on; | |
206 | }; | |
207 | ||
208 | ldo11_reg: LDO11 { | |
209 | regulator-name = "VDD18_ABB1_1.8V"; | |
210 | regulator-min-microvolt = <1800000>; | |
211 | regulator-max-microvolt = <1800000>; | |
212 | regulator-always-on; | |
213 | }; | |
214 | ||
215 | ldo12_reg: LDO12 { | |
216 | regulator-name = "VDD33_USB_3.3V"; | |
217 | regulator-min-microvolt = <3300000>; | |
218 | regulator-max-microvolt = <3300000>; | |
219 | regulator-always-on; | |
220 | regulator-boot-on; | |
221 | }; | |
222 | ||
223 | ldo13_reg: LDO13 { | |
224 | regulator-name = "VDDQ_C2C_W_1.8V"; | |
225 | regulator-min-microvolt = <1800000>; | |
226 | regulator-max-microvolt = <1800000>; | |
227 | regulator-always-on; | |
228 | regulator-boot-on; | |
229 | }; | |
230 | ||
231 | ldo14_reg: LDO14 { | |
232 | regulator-name = "VDD18_ABB0_2_1.8V"; | |
233 | regulator-min-microvolt = <1800000>; | |
234 | regulator-max-microvolt = <1800000>; | |
235 | regulator-always-on; | |
236 | regulator-boot-on; | |
237 | }; | |
238 | ||
239 | ldo15_reg: LDO15 { | |
240 | regulator-name = "VDD10_HSIC_1.0V"; | |
241 | regulator-min-microvolt = <1000000>; | |
242 | regulator-max-microvolt = <1000000>; | |
243 | regulator-always-on; | |
244 | regulator-boot-on; | |
245 | }; | |
246 | ||
247 | ldo16_reg: LDO16 { | |
248 | regulator-name = "VDD18_HSIC_1.8V"; | |
249 | regulator-min-microvolt = <1800000>; | |
250 | regulator-max-microvolt = <1800000>; | |
251 | regulator-always-on; | |
252 | regulator-boot-on; | |
253 | }; | |
254 | ||
255 | ldo20_reg: LDO20 { | |
256 | regulator-name = "LDO20_1.8V"; | |
257 | regulator-min-microvolt = <1800000>; | |
258 | regulator-max-microvolt = <1800000>; | |
259 | regulator-boot-on; | |
260 | }; | |
261 | ||
262 | ldo21_reg: LDO21 { | |
263 | regulator-name = "LDO21_3.3V"; | |
264 | regulator-min-microvolt = <3300000>; | |
265 | regulator-max-microvolt = <3300000>; | |
266 | regulator-always-on; | |
267 | regulator-boot-on; | |
268 | }; | |
269 | ||
270 | ldo25_reg: LDO25 { | |
271 | regulator-name = "VDDQ_LCD_1.8V"; | |
272 | regulator-min-microvolt = <1800000>; | |
273 | regulator-max-microvolt = <1800000>; | |
274 | regulator-always-on; | |
275 | regulator-boot-on; | |
276 | }; | |
277 | ||
278 | buck1_reg: BUCK1 { | |
279 | regulator-name = "vdd_mif"; | |
280 | regulator-min-microvolt = <1000000>; | |
281 | regulator-max-microvolt = <1000000>; | |
282 | regulator-always-on; | |
283 | regulator-boot-on; | |
284 | }; | |
285 | ||
286 | buck2_reg: BUCK2 { | |
287 | regulator-name = "vdd_arm"; | |
288 | regulator-min-microvolt = <900000>; | |
289 | regulator-max-microvolt = <1350000>; | |
290 | regulator-always-on; | |
291 | regulator-boot-on; | |
292 | }; | |
293 | ||
294 | buck3_reg: BUCK3 { | |
295 | regulator-name = "vdd_int"; | |
296 | regulator-min-microvolt = <1000000>; | |
297 | regulator-max-microvolt = <1000000>; | |
298 | regulator-always-on; | |
299 | regulator-boot-on; | |
300 | }; | |
301 | ||
302 | buck4_reg: BUCK4 { | |
303 | regulator-name = "vdd_g3d"; | |
304 | regulator-min-microvolt = <900000>; | |
305 | regulator-max-microvolt = <1100000>; | |
306 | regulator-microvolt-offset = <50000>; | |
307 | }; | |
308 | ||
309 | buck5_reg: BUCK5 { | |
310 | regulator-name = "VDDQ_CKEM1_2_1.2V"; | |
311 | regulator-min-microvolt = <1200000>; | |
312 | regulator-max-microvolt = <1200000>; | |
313 | regulator-always-on; | |
314 | regulator-boot-on; | |
315 | }; | |
316 | ||
317 | buck6_reg: BUCK6 { | |
318 | regulator-name = "BUCK6_1.35V"; | |
319 | regulator-min-microvolt = <1350000>; | |
320 | regulator-max-microvolt = <1350000>; | |
321 | regulator-always-on; | |
322 | regulator-boot-on; | |
323 | }; | |
324 | ||
325 | buck7_reg: BUCK7 { | |
326 | regulator-name = "BUCK7_2.0V"; | |
327 | regulator-min-microvolt = <2000000>; | |
328 | regulator-max-microvolt = <2000000>; | |
329 | regulator-always-on; | |
330 | }; | |
331 | ||
332 | buck8_reg: BUCK8 { | |
333 | regulator-name = "BUCK8_2.8V"; | |
334 | regulator-min-microvolt = <2800000>; | |
335 | regulator-max-microvolt = <2800000>; | |
ec601ff3 MS |
336 | }; |
337 | }; | |
338 | }; | |
339 | }; | |
340 | ||
5a852743 SN |
341 | i2c@13870000 { |
342 | pinctrl-names = "default"; | |
343 | pinctrl-0 = <&i2c1_bus>; | |
344 | status = "okay"; | |
345 | max98090: max98090@10 { | |
346 | compatible = "maxim,max98090"; | |
347 | reg = <0x10>; | |
348 | interrupt-parent = <&gpx0>; | |
349 | interrupts = <0 0>; | |
350 | }; | |
351 | }; | |
352 | ||
ec601ff3 MS |
353 | exynos-usbphy@125B0000 { |
354 | status = "okay"; | |
355 | }; | |
356 | ||
357 | hsotg@12480000 { | |
358 | status = "okay"; | |
359 | vusb_d-supply = <&ldo15_reg>; | |
360 | vusb_a-supply = <&ldo12_reg>; | |
361 | }; | |
362 | ||
363 | ehci: ehci@12580000 { | |
364 | status = "okay"; | |
365 | }; | |
366 | }; | |
081a15e3 MS |
367 | |
368 | &pinctrl_1 { | |
369 | gpio_power_key: power_key { | |
370 | samsung,pins = "gpx1-3"; | |
371 | samsung,pin-pud = <0>; | |
372 | }; | |
eea6653a DD |
373 | |
374 | max77686_irq: max77686-irq { | |
375 | samsung,pins = "gpx3-2"; | |
376 | samsung,pin-function = <0>; | |
377 | samsung,pin-pud = <0>; | |
378 | samsung,pin-drv = <0>; | |
379 | }; | |
081a15e3 | 380 | }; |