[deliverable/linux.git] / arch / arm / boot / dts / imx6qdl-cubox-i.dtsi

/*
 * Copyright (C) 2014 Russell King
 */
#include "imx6qdl-microsom.dtsi"
#include "imx6qdl-microsom-ar8035.dtsi"

/ {
	ir_recv: ir-receiver {
		compatible = "gpio-ir-receiver";
		gpios = <&gpio3 9 1>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_cubox_i_ir>;
	};

	pwmleds {
		compatible = "pwm-leds";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_cubox_i_pwm1>;

		front {
			active-low;
			label = "imx6:red:front";
			max-brightness = <248>;
			pwms = <&pwm1 0 50000>;
		};
	};

	regulators {
		compatible = "simple-bus";

		reg_3p3v: 3p3v {
			compatible = "regulator-fixed";
			regulator-name = "3P3V";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			regulator-always-on;
		};

		reg_usbh1_vbus: usb-h1-vbus {
			compatible = "regulator-fixed";
			enable-active-high;
			gpio = <&gpio1 0 0>;
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_cubox_i_usbh1_vbus>;
			regulator-name = "usb_h1_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
		};

		reg_usbotg_vbus: usb-otg-vbus {
			compatible = "regulator-fixed";
			enable-active-high;
			gpio = <&gpio3 22 0>;
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_cubox_i_usbotg_vbus>;
			regulator-name = "usb_otg_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
		};
	};

	sound-spdif {
		compatible = "fsl,imx-audio-spdif";
		model = "Integrated SPDIF";
		/* IMX6 doesn't implement this yet */
		spdif-controller = <&spdif>;
		spdif-out;
	};
};

&hdmi {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_cubox_i_hdmi>;
	ddc-i2c-bus = <&i2c2>;
	status = "okay";
};

&i2c2 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_cubox_i_i2c2>;
	status = "okay";
};

&i2c3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_cubox_i_i2c3>;

	status = "okay";

	rtc: pcf8523@68 {
		compatible = "nxp,pcf8523";
		reg = <0x68>;
	};
};

&iomuxc {
	cubox_i {
		pinctrl_cubox_i_hdmi: cubox-i-hdmi {
			fsl,pins = <
				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
			>;
		};

		pinctrl_cubox_i_i2c2: cubox-i-i2c2 {
			fsl,pins = <
				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
			>;
		};

		pinctrl_cubox_i_i2c3: cubox-i-i2c3 {
			fsl,pins = <
				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
			>;
		};

		pinctrl_cubox_i_ir: cubox-i-ir {
			fsl,pins = <
				MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000
			>;
		};

		pinctrl_cubox_i_pwm1: cubox-i-pwm1-front-led {
			fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0>;
		};

		pinctrl_cubox_i_spdif: cubox-i-spdif {
			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
		};

		pinctrl_cubox_i_usbh1: cubox-i-usbh1 {
			fsl,pins = <MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0>;
		};

		pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus {
			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>;
		};

		pinctrl_cubox_i_usbotg: cubox-i-usbotg {
			/*
			 * The Cubox-i pulls ID low, but as it's pointless
			 * leaving it as a pull-up, even if it is just 10uA.
			 */
			fsl,pins = <
				MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
				MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
			>;
		};

		pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus {
			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x4001b0b0>;
		};

		pinctrl_cubox_i_usdhc2_aux: cubox-i-usdhc2-aux {
			fsl,pins = <
				MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071
			>;
		};

		pinctrl_cubox_i_usdhc2: cubox-i-usdhc2 {
			fsl,pins = <
				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
			>;
		};
	};
};

&spdif {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_cubox_i_spdif>;
	status = "okay";
};

&usbh1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_cubox_i_usbh1>;
	vbus-supply = <&reg_usbh1_vbus>;
	status = "okay";
};

&usbotg {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_cubox_i_usbotg>;
	vbus-supply = <&reg_usbotg_vbus>;
	status = "okay";
};

&usdhc2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>;
	vmmc-supply = <&reg_3p3v>;
	cd-gpios = <&gpio1 4 0>;
	status = "okay";
};
Commit	Line	Data
971488f1 RK	1	/*
	2	* Copyright (C) 2014 Russell King
	3	*/
	4	#include "imx6qdl-microsom.dtsi"
	5	#include "imx6qdl-microsom-ar8035.dtsi"
	6
	7	/ {
	8	ir_recv: ir-receiver {
	9	compatible = "gpio-ir-receiver";
	10	gpios = <&gpio3 9 1>;
	11	pinctrl-names = "default";
	12	pinctrl-0 = <&pinctrl_cubox_i_ir>;
	13	};
	14
eea53bb1 RK	15	pwmleds {
	16	compatible = "pwm-leds";
	17	pinctrl-names = "default";
	18	pinctrl-0 = <&pinctrl_cubox_i_pwm1>;
	19
	20	front {
	21	active-low;
	22	label = "imx6:red:front";
	23	max-brightness = <248>;
	24	pwms = <&pwm1 0 50000>;
	25	};
	26	};
	27
971488f1 RK	28	regulators {
	29	compatible = "simple-bus";
	30
	31	reg_3p3v: 3p3v {
	32	compatible = "regulator-fixed";
	33	regulator-name = "3P3V";
	34	regulator-min-microvolt = <3300000>;
	35	regulator-max-microvolt = <3300000>;
	36	regulator-always-on;
	37	};
	38
	39	reg_usbh1_vbus: usb-h1-vbus {
	40	compatible = "regulator-fixed";
	41	enable-active-high;
	42	gpio = <&gpio1 0 0>;
	43	pinctrl-names = "default";
	44	pinctrl-0 = <&pinctrl_cubox_i_usbh1_vbus>;
	45	regulator-name = "usb_h1_vbus";
	46	regulator-min-microvolt = <5000000>;
	47	regulator-max-microvolt = <5000000>;
	48	};
	49
	50	reg_usbotg_vbus: usb-otg-vbus {
	51	compatible = "regulator-fixed";
	52	enable-active-high;
	53	gpio = <&gpio3 22 0>;
	54	pinctrl-names = "default";
	55	pinctrl-0 = <&pinctrl_cubox_i_usbotg_vbus>;
	56	regulator-name = "usb_otg_vbus";
	57	regulator-min-microvolt = <5000000>;
	58	regulator-max-microvolt = <5000000>;
	59	};
	60	};
	61
971488f1 RK	62	sound-spdif {
971488f1 RK	63	compatible = "fsl,imx-audio-spdif";
962af861	64	model = "Integrated SPDIF";
971488f1 RK	65	/* IMX6 doesn't implement this yet */
	66	spdif-controller = <&spdif>;
	67	spdif-out;
	68	};
	69	};
	70
f34d0d5d RK	71	&hdmi {
	72	pinctrl-names = "default";
	73	pinctrl-0 = <&pinctrl_cubox_i_hdmi>;
	74	ddc-i2c-bus = <&i2c2>;
	75	status = "okay";
	76	};
	77
	78	&i2c2 {
	79	clock-frequency = <100000>;
	80	pinctrl-names = "default";
	81	pinctrl-0 = <&pinctrl_cubox_i_i2c2>;
	82	status = "okay";
	83	};
	84
971488f1 RK	85	&i2c3 {
	86	pinctrl-names = "default";
	87	pinctrl-0 = <&pinctrl_cubox_i_i2c3>;
	88
	89	status = "okay";
	90
	91	rtc: pcf8523@68 {
	92	compatible = "nxp,pcf8523";
	93	reg = <0x68>;
	94	};
	95	};
	96
	97	&iomuxc {
	98	cubox_i {
f34d0d5d RK	99	pinctrl_cubox_i_hdmi: cubox-i-hdmi {
	100	fsl,pins = <
	101	MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
	102	>;
	103	};
	104
	105	pinctrl_cubox_i_i2c2: cubox-i-i2c2 {
	106	fsl,pins = <
	107	MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
	108	MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
	109	>;
	110	};
	111
971488f1 RK	112	pinctrl_cubox_i_i2c3: cubox-i-i2c3 {
	113	fsl,pins = <
	114	MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
	115	MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
	116	>;
	117	};
	118
	119	pinctrl_cubox_i_ir: cubox-i-ir {
	120	fsl,pins = <
	121	MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000
	122	>;
	123	};
	124
eea53bb1 RK	125	pinctrl_cubox_i_pwm1: cubox-i-pwm1-front-led {
	126	fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0>;
	127	};
	128
971488f1	129	pinctrl_cubox_i_spdif: cubox-i-spdif {
87f9260b	130	fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
971488f1 RK	131	};
971488f1 RK	132
f9908c17 RK	133	pinctrl_cubox_i_usbh1: cubox-i-usbh1 {
	134	fsl,pins = <MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0>;
	135	};
	136
971488f1 RK	137	pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus {
	138	fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>;
	139	};
	140
f9908c17	141	pinctrl_cubox_i_usbotg: cubox-i-usbotg {
589681b2	142	/*
f9908c17	143	* The Cubox-i pulls ID low, but as it's pointless
589681b2 RK	144	* leaving it as a pull-up, even if it is just 10uA.
589681b2 RK	145	*/
f9908c17 RK	146	fsl,pins = <
	147	MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
	148	MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
	149	>;
589681b2 RK	150	};
589681b2 RK	151
971488f1 RK	152	pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus {
	153	fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x4001b0b0>;
	154	};
	155
	156	pinctrl_cubox_i_usdhc2_aux: cubox-i-usdhc2-aux {
	157	fsl,pins = <
	158	MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071
	159	MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071
	160	>;
	161	};
	162
	163	pinctrl_cubox_i_usdhc2: cubox-i-usdhc2 {
	164	fsl,pins = <
	165	MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
	166	MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
	167	MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
	168	MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
	169	MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
	170	MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
	171	>;
	172	};
	173	};
	174	};
	175
	176	&spdif {
87f9260b RK	177	pinctrl-names = "default";
87f9260b RK	178	pinctrl-0 = <&pinctrl_cubox_i_spdif>;
971488f1 RK	179	status = "okay";
	180	};
	181
	182	&usbh1 {
f9908c17 RK	183	pinctrl-names = "default";
f9908c17 RK	184	pinctrl-0 = <&pinctrl_cubox_i_usbh1>;
971488f1 RK	185	vbus-supply = <&reg_usbh1_vbus>;
	186	status = "okay";
	187	};
	188
	189	&usbotg {
589681b2	190	pinctrl-names = "default";
f9908c17	191	pinctrl-0 = <&pinctrl_cubox_i_usbotg>;
971488f1 RK	192	vbus-supply = <&reg_usbotg_vbus>;
	193	status = "okay";
	194	};
	195
	196	&usdhc2 {
	197	pinctrl-names = "default";
	198	pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>;
	199	vmmc-supply = <&reg_3p3v>;
	200	cd-gpios = <&gpio1 4 0>;
	201	status = "okay";
	202	};