[deliverable/linux.git] / arch / arm / boot / dts / imx6qdl-gw53xx.dtsi

/*
 * Copyright 2013 Gateworks Corporation
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
 * Version 2 or later at the following locations:
 *
 * http://www.opensource.org/licenses/gpl-license.html
 * http://www.gnu.org/copyleft/gpl.html
 */

#include <dt-bindings/gpio/gpio.h>

/ {
	/* these are used by bootloader for disabling nodes */
	aliases {
		ethernet1 = &eth1;
		led0 = &led0;
		led1 = &led1;
		led2 = &led2;
		nand = &gpmi;
		ssi0 = &ssi1;
		usb0 = &usbh1;
		usb1 = &usbotg;
	};

	chosen {
		bootargs = "console=ttymxc1,115200";
	};

	backlight {
		compatible = "pwm-backlight";
		pwms = <&pwm4 0 5000000>;
		brightness-levels = <0 4 8 16 32 64 128 255>;
		default-brightness-level = <7>;
	};

	leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_gpio_leds>;

		led0: user1 {
			label = "user1";
			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
			default-state = "on";
			linux,default-trigger = "heartbeat";
		};

		led1: user2 {
			label = "user2";
			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
			default-state = "off";
		};

		led2: user3 {
			label = "user3";
			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
			default-state = "off";
		};
	};

	memory {
		reg = <0x10000000 0x40000000>;
	};

	pps {
		compatible = "pps-gpio";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_pps>;
		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
		status = "okay";
	};

	regulators {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <0>;

		reg_1p0v: regulator@0 {
			compatible = "regulator-fixed";
			reg = <0>;
			regulator-name = "1P0V";
			regulator-min-microvolt = <1000000>;
			regulator-max-microvolt = <1000000>;
			regulator-always-on;
		};

		/* remove when pmic 1p8 regulator available */
		reg_1p8v: regulator@1 {
			compatible = "regulator-fixed";
			reg = <1>;
			regulator-name = "1P8V";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-always-on;
		};

		reg_3p3v: regulator@2 {
			compatible = "regulator-fixed";
			reg = <2>;
			regulator-name = "3P3V";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			regulator-always-on;
		};

		reg_usb_h1_vbus: regulator@3 {
			compatible = "regulator-fixed";
			reg = <3>;
			regulator-name = "usb_h1_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			regulator-always-on;
		};

		reg_usb_otg_vbus: regulator@4 {
			compatible = "regulator-fixed";
			reg = <4>;
			regulator-name = "usb_otg_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
			enable-active-high;
		};
	};

	sound {
		compatible = "fsl,imx6q-ventana-sgtl5000",
			     "fsl,imx-audio-sgtl5000";
		model = "sgtl5000-audio";
		ssi-controller = <&ssi1>;
		audio-codec = <&codec>;
		audio-routing =
			"MIC_IN", "Mic Jack",
			"Mic Jack", "Mic Bias",
			"Headphone Jack", "HP_OUT";
		mux-int-port = <1>;
		mux-ext-port = <4>;
	};
};

&audmux {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_audmux>;
	status = "okay";
};

&can1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flexcan1>;
	status = "okay";
};

&fec {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_enet>;
	phy-mode = "rgmii";
	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
	status = "okay";
};

&gpmi {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_gpmi_nand>;
	status = "okay";
};

&hdmi {
	ddc-i2c-bus = <&i2c3>;
	status = "okay";
};

&i2c1 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c1>;
	status = "okay";

	eeprom1: eeprom@50 {
		compatible = "atmel,24c02";
		reg = <0x50>;
		pagesize = <16>;
	};

	eeprom2: eeprom@51 {
		compatible = "atmel,24c02";
		reg = <0x51>;
		pagesize = <16>;
	};

	eeprom3: eeprom@52 {
		compatible = "atmel,24c02";
		reg = <0x52>;
		pagesize = <16>;
	};

	eeprom4: eeprom@53 {
		compatible = "atmel,24c02";
		reg = <0x53>;
		pagesize = <16>;
	};

	gpio: pca9555@23 {
		compatible = "nxp,pca9555";
		reg = <0x23>;
		gpio-controller;
		#gpio-cells = <2>;
	};

	rtc: ds1672@68 {
		compatible = "dallas,ds1672";
		reg = <0x68>;
	};
};

&i2c2 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c2>;
	status = "okay";
};

&i2c3 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c3>;
	status = "okay";

	codec: sgtl5000@0a {
		compatible = "fsl,sgtl5000";
		reg = <0x0a>;
		clocks = <&clks 201>;
		VDDA-supply = <&reg_1p8v>;
		VDDIO-supply = <&reg_3p3v>;
	};

	touchscreen: egalax_ts@04 {
		compatible = "eeti,egalax_ts";
		reg = <0x04>;
		interrupt-parent = <&gpio1>;
		interrupts = <11 2>;
		wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	};
};

&ldb {
	status = "okay";

	lvds-channel@1 {
		fsl,data-mapping = "spwg";
		fsl,data-width = <18>;
		status = "okay";

		display-timings {
			native-mode = <&timing0>;
			timing0: hsd100pxn1 {
				clock-frequency = <65000000>;
				hactive = <1024>;
				vactive = <768>;
				hback-porch = <220>;
				hfront-porch = <40>;
				vback-porch = <21>;
				vfront-porch = <7>;
				hsync-len = <60>;
				vsync-len = <10>;
			};
		};
	};
};

&pcie {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pcie>;
	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
	status = "okay";

	eth1: sky2@8 { /* MAC/PHY on bus 8 */
		compatible = "marvell,sky2";
	};
};

&pwm4 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm4>;
	status = "okay";
};

&ssi1 {
	status = "okay";
};

&uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1>;
	status = "okay";
};

&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart2>;
	status = "okay";
};

&uart5 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart5>;
	status = "okay";
};

&usbotg {
	vbus-supply = <&reg_usb_otg_vbus>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usbotg>;
	disable-over-current;
	status = "okay";
};

&usbh1 {
	vbus-supply = <&reg_usb_h1_vbus>;
	status = "okay";
};

&usdhc3 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc3>;
	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
	vmmc-supply = <&reg_3p3v>;
	no-1-8-v; /* firmware will remove if board revision supports */
	status = "okay";
};

&iomuxc {
	imx6qdl-gw53xx {
		pinctrl_audmux: audmuxgrp {
			fsl,pins = <
				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
			>;
		};

		pinctrl_enet: enetgrp {
			fsl,pins = <
				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
			>;
		};

		pinctrl_flexcan1: flexcan1grp {
			fsl,pins = <
				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
			>;
		};

		pinctrl_gpio_leds: gpioledsgrp {
			fsl,pins = <
				MX6QDL_PAD_KEY_COL0__GPIO4_IO06   0x1b0b0
				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x1b0b0
				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x1b0b0
			>;
		};

		pinctrl_gpmi_nand: gpminandgrp {
			fsl,pins = <
				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
			>;
		};

		pinctrl_i2c1: i2c1grp {
			fsl,pins = <
				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
			>;
		};

		pinctrl_i2c2: i2c2grp {
			fsl,pins = <
				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
			>;
		};

		pinctrl_i2c3: i2c3grp {
			fsl,pins = <
				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
			>;
		};

		pinctrl_pcie: pciegrp {
			fsl,pins = <
				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29  0x1b0b0 /* PCIE RST */
			>;
		};

		pinctrl_pps: ppsgrp {
			fsl,pins = <
				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
			>;
		};

		pinctrl_pwm4: pwm4grp {
			fsl,pins = <
				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
			>;
		};

		pinctrl_uart1: uart1grp {
			fsl,pins = <
				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
			>;
		};

		pinctrl_uart2: uart2grp {
			fsl,pins = <
				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
			>;
		};

		pinctrl_uart5: uart5grp {
			fsl,pins = <
				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
			>;
		};

		pinctrl_usbotg: usbotggrp {
			fsl,pins = <
				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
				MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* OC */
			>;
		};

		pinctrl_usdhc3: usdhc3grp {
			fsl,pins = <
				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
			>;
		};

		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
			fsl,pins = <
				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
			>;
		};

		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
			fsl,pins = <
				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
			>;
		};
	};
};
Commit	Line	Data
e3946fe8 TH	1	/*
	2	* Copyright 2013 Gateworks Corporation
	3	*
	4	* The code contained herein is licensed under the GNU General Public
	5	* License. You may obtain a copy of the GNU General Public License
	6	* Version 2 or later at the following locations:
	7	*
	8	* http://www.opensource.org/licenses/gpl-license.html
	9	* http://www.gnu.org/copyleft/gpl.html
	10	*/
	11
326cdb16 TH	12	#include <dt-bindings/gpio/gpio.h>
326cdb16 TH	13
e3946fe8 TH	14	/ {
	15	/* these are used by bootloader for disabling nodes */
	16	aliases {
e3946fe8 TH	17	ethernet1 = &eth1;
	18	led0 = &led0;
	19	led1 = &led1;
	20	led2 = &led2;
	21	nand = &gpmi;
e3946fe8 TH	22	ssi0 = &ssi1;
	23	usb0 = &usbh1;
	24	usb1 = &usbotg;
e3946fe8 TH	25	};
	26
	27	chosen {
	28	bootargs = "console=ttymxc1,115200";
	29	};
	30
b3253241 TH	31	backlight {
	32	compatible = "pwm-backlight";
	33	pwms = <&pwm4 0 5000000>;
	34	brightness-levels = <0 4 8 16 32 64 128 255>;
	35	default-brightness-level = <7>;
	36	};
	37
e3946fe8 TH	38	leds {
e3946fe8 TH	39	compatible = "gpio-leds";
b5f37b76 TH	40	pinctrl-names = "default";
b5f37b76 TH	41	pinctrl-0 = <&pinctrl_gpio_leds>;
e3946fe8 TH	42
	43	led0: user1 {
	44	label = "user1";
326cdb16	45	gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
e3946fe8 TH	46	default-state = "on";
	47	linux,default-trigger = "heartbeat";
	48	};
	49
	50	led1: user2 {
	51	label = "user2";
326cdb16	52	gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
e3946fe8 TH	53	default-state = "off";
	54	};
	55
	56	led2: user3 {
	57	label = "user3";
326cdb16	58	gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
e3946fe8 TH	59	default-state = "off";
	60	};
	61	};
	62
	63	memory {
	64	reg = <0x10000000 0x40000000>;
	65	};
	66
	67	pps {
	68	compatible = "pps-gpio";
b5f37b76 TH	69	pinctrl-names = "default";
b5f37b76 TH	70	pinctrl-0 = <&pinctrl_pps>;
326cdb16	71	gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
e3946fe8 TH	72	status = "okay";
	73	};
	74
	75	regulators {
	76	compatible = "simple-bus";
	77	#address-cells = <1>;
	78	#size-cells = <0>;
	79
	80	reg_1p0v: regulator@0 {
	81	compatible = "regulator-fixed";
	82	reg = <0>;
	83	regulator-name = "1P0V";
	84	regulator-min-microvolt = <1000000>;
	85	regulator-max-microvolt = <1000000>;
	86	regulator-always-on;
	87	};
	88
	89	/* remove when pmic 1p8 regulator available */
	90	reg_1p8v: regulator@1 {
	91	compatible = "regulator-fixed";
	92	reg = <1>;
	93	regulator-name = "1P8V";
	94	regulator-min-microvolt = <1800000>;
	95	regulator-max-microvolt = <1800000>;
	96	regulator-always-on;
	97	};
	98
	99	reg_3p3v: regulator@2 {
	100	compatible = "regulator-fixed";
	101	reg = <2>;
	102	regulator-name = "3P3V";
	103	regulator-min-microvolt = <3300000>;
	104	regulator-max-microvolt = <3300000>;
	105	regulator-always-on;
	106	};
	107
	108	reg_usb_h1_vbus: regulator@3 {
	109	compatible = "regulator-fixed";
	110	reg = <3>;
	111	regulator-name = "usb_h1_vbus";
	112	regulator-min-microvolt = <5000000>;
	113	regulator-max-microvolt = <5000000>;
	114	regulator-always-on;
	115	};
	116
	117	reg_usb_otg_vbus: regulator@4 {
	118	compatible = "regulator-fixed";
	119	reg = <4>;
	120	regulator-name = "usb_otg_vbus";
	121	regulator-min-microvolt = <5000000>;
	122	regulator-max-microvolt = <5000000>;
326cdb16	123	gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
e3946fe8 TH	124	enable-active-high;
	125	};
	126	};
	127
	128	sound {
b12d1e94	129	compatible = "fsl,imx6q-ventana-sgtl5000",
e3946fe8	130	"fsl,imx-audio-sgtl5000";
b12d1e94	131	model = "sgtl5000-audio";
e3946fe8 TH	132	ssi-controller = <&ssi1>;
	133	audio-codec = <&codec>;
	134	audio-routing =
	135	"MIC_IN", "Mic Jack",
	136	"Mic Jack", "Mic Bias",
	137	"Headphone Jack", "HP_OUT";
	138	mux-int-port = <1>;
	139	mux-ext-port = <4>;
	140	};
	141	};
	142
	143	&audmux {
	144	pinctrl-names = "default";
	145	pinctrl-0 = <&pinctrl_audmux>;
	146	status = "okay";
	147	};
	148
	149	&can1 {
	150	pinctrl-names = "default";
	151	pinctrl-0 = <&pinctrl_flexcan1>;
	152	status = "okay";
	153	};
	154
	155	&fec {
	156	pinctrl-names = "default";
	157	pinctrl-0 = <&pinctrl_enet>;
	158	phy-mode = "rgmii";
326cdb16	159	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
e3946fe8 TH	160	status = "okay";
	161	};
	162
	163	&gpmi {
	164	pinctrl-names = "default";
	165	pinctrl-0 = <&pinctrl_gpmi_nand>;
	166	status = "okay";
	167	};
	168
aef15dba TH	169	&hdmi {
	170	ddc-i2c-bus = <&i2c3>;
	171	status = "okay";
	172	};
	173
e3946fe8 TH	174	&i2c1 {
	175	clock-frequency = <100000>;
	176	pinctrl-names = "default";
	177	pinctrl-0 = <&pinctrl_i2c1>;
	178	status = "okay";
	179
	180	eeprom1: eeprom@50 {
	181	compatible = "atmel,24c02";
	182	reg = <0x50>;
	183	pagesize = <16>;
	184	};
	185
	186	eeprom2: eeprom@51 {
	187	compatible = "atmel,24c02";
	188	reg = <0x51>;
	189	pagesize = <16>;
	190	};
	191
	192	eeprom3: eeprom@52 {
	193	compatible = "atmel,24c02";
	194	reg = <0x52>;
	195	pagesize = <16>;
	196	};
	197
	198	eeprom4: eeprom@53 {
	199	compatible = "atmel,24c02";
	200	reg = <0x53>;
	201	pagesize = <16>;
	202	};
	203
	204	gpio: pca9555@23 {
	205	compatible = "nxp,pca9555";
	206	reg = <0x23>;
	207	gpio-controller;
	208	#gpio-cells = <2>;
	209	};
	210
e3946fe8 TH	211	rtc: ds1672@68 {
	212	compatible = "dallas,ds1672";
	213	reg = <0x68>;
	214	};
	215	};
	216
	217	&i2c2 {
	218	clock-frequency = <100000>;
	219	pinctrl-names = "default";
	220	pinctrl-0 = <&pinctrl_i2c2>;
	221	status = "okay";
e3946fe8 TH	222	};
	223
	224	&i2c3 {
	225	clock-frequency = <100000>;
	226	pinctrl-names = "default";
	227	pinctrl-0 = <&pinctrl_i2c3>;
	228	status = "okay";
	229
e3946fe8 TH	230	codec: sgtl5000@0a {
	231	compatible = "fsl,sgtl5000";
	232	reg = <0x0a>;
	233	clocks = <&clks 201>;
	234	VDDA-supply = <&reg_1p8v>;
	235	VDDIO-supply = <&reg_3p3v>;
	236	};
	237
e3946fe8 TH	238	touchscreen: egalax_ts@04 {
	239	compatible = "eeti,egalax_ts";
	240	reg = <0x04>;
	241	interrupt-parent = <&gpio1>;
326cdb16 TH	242	interrupts = <11 2>;
326cdb16 TH	243	wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
e3946fe8	244	};
e3946fe8 TH	245	};
e3946fe8 TH	246
b5f37b76 TH	247	&ldb {
b5f37b76 TH	248	status = "okay";
e3946fe8	249
b5f37b76 TH	250	lvds-channel@1 {
	251	fsl,data-mapping = "spwg";
	252	fsl,data-width = <18>;
	253	status = "okay";
	254
	255	display-timings {
	256	native-mode = <&timing0>;
	257	timing0: hsd100pxn1 {
	258	clock-frequency = <65000000>;
	259	hactive = <1024>;
	260	vactive = <768>;
	261	hback-porch = <220>;
	262	hfront-porch = <40>;
	263	vback-porch = <21>;
	264	vfront-porch = <7>;
	265	hsync-len = <60>;
	266	vsync-len = <10>;
	267	};
e3946fe8	268	};
b5f37b76 TH	269	};
	270	};
	271
	272	&pcie {
	273	pinctrl-names = "default";
	274	pinctrl-0 = <&pinctrl_pcie>;
	275	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
	276	status = "okay";
	277
	278	eth1: sky2@8 { /* MAC/PHY on bus 8 */
	279	compatible = "marvell,sky2";
	280	};
	281	};
	282
	283	&pwm4 {
	284	pinctrl-names = "default";
	285	pinctrl-0 = <&pinctrl_pwm4>;
	286	status = "okay";
	287	};
	288
	289	&ssi1 {
b5f37b76 TH	290	status = "okay";
b5f37b76 TH	291	};
e3946fe8	292
b5f37b76 TH	293	&uart1 {
	294	pinctrl-names = "default";
	295	pinctrl-0 = <&pinctrl_uart1>;
	296	status = "okay";
	297	};
	298
	299	&uart2 {
	300	pinctrl-names = "default";
	301	pinctrl-0 = <&pinctrl_uart2>;
	302	status = "okay";
	303	};
	304
	305	&uart5 {
	306	pinctrl-names = "default";
	307	pinctrl-0 = <&pinctrl_uart5>;
	308	status = "okay";
	309	};
	310
	311	&usbotg {
	312	vbus-supply = <&reg_usb_otg_vbus>;
	313	pinctrl-names = "default";
	314	pinctrl-0 = <&pinctrl_usbotg>;
	315	disable-over-current;
	316	status = "okay";
	317	};
	318
	319	&usbh1 {
	320	vbus-supply = <&reg_usb_h1_vbus>;
	321	status = "okay";
	322	};
	323
	324	&usdhc3 {
3ee12d80	325	pinctrl-names = "default", "state_100mhz", "state_200mhz";
b5f37b76	326	pinctrl-0 = <&pinctrl_usdhc3>;
3ee12d80 TH	327	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
3ee12d80 TH	328	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
89c1a8cf	329	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
b5f37b76	330	vmmc-supply = <&reg_3p3v>;
3ee12d80	331	no-1-8-v; /* firmware will remove if board revision supports */
b5f37b76 TH	332	status = "okay";
	333	};
	334
	335	&iomuxc {
	336	imx6qdl-gw53xx {
e3946fe8 TH	337	pinctrl_audmux: audmuxgrp {
	338	fsl,pins = <
	339	MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
	340	MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
	341	MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
	342	MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
b5f37b76	343	MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
e3946fe8 TH	344	>;
	345	};
	346
	347	pinctrl_enet: enetgrp {
	348	fsl,pins = <
	349	MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
	350	MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
	351	MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
	352	MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
	353	MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
	354	MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
	355	MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
	356	MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
	357	MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
	358	MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
	359	MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
	360	MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
	361	MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
	362	MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
	363	MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
	364	MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
	365	>;
	366	};
	367
	368	pinctrl_flexcan1: flexcan1grp {
	369	fsl,pins = <
73e005c1 TH	370	MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
73e005c1 TH	371	MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
b5f37b76 TH	372	MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */
	373	>;
	374	};
	375
	376	pinctrl_gpio_leds: gpioledsgrp {
	377	fsl,pins = <
	378	MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
	379	MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
	380	MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
e3946fe8 TH	381	>;
	382	};
	383
	384	pinctrl_gpmi_nand: gpminandgrp {
	385	fsl,pins = <
	386	MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
	387	MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
	388	MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
	389	MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
	390	MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
e3946fe8 TH	391	MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
	392	MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
	393	MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
	394	MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
	395	MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
	396	MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
	397	MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
	398	MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
	399	MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
	400	MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
	401	>;
	402	};
	403
	404	pinctrl_i2c1: i2c1grp {
	405	fsl,pins = <
	406	MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
	407	MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
	408	>;
	409	};
	410
	411	pinctrl_i2c2: i2c2grp {
	412	fsl,pins = <
	413	MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
	414	MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
	415	>;
	416	};
	417
	418	pinctrl_i2c3: i2c3grp {
	419	fsl,pins = <
	420	MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
	421	MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
	422	>;
	423	};
	424
b5f37b76 TH	425	pinctrl_pcie: pciegrp {
	426	fsl,pins = <
	427	MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
	428	MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */
	429	>;
	430	};
	431
	432	pinctrl_pps: ppsgrp {
	433	fsl,pins = <
	434	MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
	435	>;
	436	};
	437
b3253241 TH	438	pinctrl_pwm4: pwm4grp {
	439	fsl,pins = <
	440	MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
	441	>;
	442	};
	443
e3946fe8 TH	444	pinctrl_uart1: uart1grp {
	445	fsl,pins = <
	446	MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
	447	MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
	448	>;
	449	};
	450
	451	pinctrl_uart2: uart2grp {
	452	fsl,pins = <
	453	MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
	454	MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
	455	>;
	456	};
	457
	458	pinctrl_uart5: uart5grp {
	459	fsl,pins = <
	460	MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
	461	MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
	462	>;
	463	};
	464
	465	pinctrl_usbotg: usbotggrp {
	466	fsl,pins = <
	467	MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
b5f37b76 TH	468	MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */
b5f37b76 TH	469	MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */
e3946fe8 TH	470	>;
	471	};
	472
	473	pinctrl_usdhc3: usdhc3grp {
	474	fsl,pins = <
	475	MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
	476	MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
	477	MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
	478	MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
	479	MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
	480	MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
3ee12d80 TH	481	MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
	482	MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
	483	>;
	484	};
	485
	486	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
	487	fsl,pins = <
	488	MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
	489	MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
	490	MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
	491	MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
	492	MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
	493	MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
	494	MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
	495	MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
	496	>;
	497	};
	498
	499	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
	500	fsl,pins = <
	501	MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
	502	MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
	503	MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
	504	MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
	505	MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
	506	MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
	507	MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
	508	MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
e3946fe8 TH	509	>;
	510	};
	511	};
	512	};