Commit | Line | Data |
---|---|---|
e9d6d6b6 TH |
1 | /* |
2 | * Copyright 2014 Gateworks Corporation | |
3 | * | |
4 | * This file is dual-licensed: you can use it either under the terms | |
5 | * of the GPL or the X11 license, at your option. Note that this dual | |
6 | * licensing only applies to this file, and not this project as a | |
7 | * whole. | |
8 | * | |
9 | * a) This file is free software; you can redistribute it and/or | |
10 | * modify it under the terms of the GNU General Public License as | |
11 | * published by the Free Software Foundation; either version 2 of | |
12 | * the License, or (at your option) any later version. | |
13 | * | |
14 | * This file is distributed in the hope that it will be useful, | |
15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
17 | * GNU General Public License for more details. | |
18 | * | |
19 | * You should have received a copy of the GNU General Public | |
20 | * License along with this file; if not, write to the Free | |
21 | * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, | |
22 | * MA 02110-1301 USA | |
23 | * | |
24 | * Or, alternatively, | |
25 | * | |
26 | * b) Permission is hereby granted, free of charge, to any person | |
27 | * obtaining a copy of this software and associated documentation | |
28 | * files (the "Software"), to deal in the Software without | |
29 | * restriction, including without limitation the rights to use, | |
30 | * copy, modify, merge, publish, distribute, sublicense, and/or | |
31 | * sell copies of the Software, and to permit persons to whom the | |
32 | * Software is furnished to do so, subject to the following | |
33 | * conditions: | |
34 | * | |
35 | * The above copyright notice and this permission notice shall be | |
36 | * included in all copies or substantial portions of the Software. | |
37 | * | |
38 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, | |
39 | * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES | |
40 | * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND | |
41 | * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT | |
42 | * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, | |
43 | * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING | |
44 | * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR | |
45 | * OTHER DEALINGS IN THE SOFTWARE. | |
46 | */ | |
47 | ||
48 | #include <dt-bindings/gpio/gpio.h> | |
49 | ||
50 | / { | |
51 | /* these are used by bootloader for disabling nodes */ | |
52 | aliases { | |
53 | led0 = &led0; | |
54 | nand = &gpmi; | |
55 | ssi0 = &ssi1; | |
56 | usb0 = &usbh1; | |
57 | usb1 = &usbotg; | |
58 | }; | |
59 | ||
60 | chosen { | |
61 | bootargs = "console=ttymxc1,115200"; | |
62 | }; | |
63 | ||
64 | leds { | |
65 | compatible = "gpio-leds"; | |
66 | pinctrl-names = "default"; | |
67 | pinctrl-0 = <&pinctrl_gpio_leds>; | |
68 | ||
69 | led0: user1 { | |
70 | label = "user1"; | |
71 | gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; | |
72 | default-state = "on"; | |
73 | linux,default-trigger = "heartbeat"; | |
74 | }; | |
75 | }; | |
76 | ||
77 | memory { | |
78 | reg = <0x10000000 0x20000000>; | |
79 | }; | |
80 | ||
81 | regulators { | |
82 | compatible = "simple-bus"; | |
83 | #address-cells = <1>; | |
84 | #size-cells = <0>; | |
85 | ||
86 | reg_5p0v: regulator@0 { | |
87 | compatible = "regulator-fixed"; | |
88 | reg = <0>; | |
89 | regulator-name = "5P0V"; | |
90 | regulator-min-microvolt = <5000000>; | |
91 | regulator-max-microvolt = <5000000>; | |
92 | }; | |
93 | ||
94 | reg_usb_h1_vbus: regulator@1 { | |
95 | compatible = "regulator-fixed"; | |
96 | reg = <1>; | |
97 | regulator-name = "usb_h1_vbus"; | |
98 | regulator-min-microvolt = <5000000>; | |
99 | regulator-max-microvolt = <5000000>; | |
100 | }; | |
101 | ||
102 | reg_usb_otg_vbus: regulator@2 { | |
103 | compatible = "regulator-fixed"; | |
104 | reg = <2>; | |
105 | regulator-name = "usb_otg_vbus"; | |
106 | regulator-min-microvolt = <5000000>; | |
107 | regulator-max-microvolt = <5000000>; | |
108 | }; | |
109 | }; | |
110 | }; | |
111 | ||
112 | &can1 { | |
113 | pinctrl-names = "default"; | |
114 | pinctrl-0 = <&pinctrl_flexcan1>; | |
115 | status = "okay"; | |
116 | }; | |
117 | ||
118 | &gpmi { | |
119 | pinctrl-names = "default"; | |
120 | pinctrl-0 = <&pinctrl_gpmi_nand>; | |
121 | status = "okay"; | |
122 | }; | |
123 | ||
124 | &hdmi { | |
125 | ddc-i2c-bus = <&i2c3>; | |
126 | status = "okay"; | |
127 | }; | |
128 | ||
129 | &i2c1 { | |
130 | clock-frequency = <100000>; | |
131 | pinctrl-names = "default"; | |
132 | pinctrl-0 = <&pinctrl_i2c1>; | |
133 | status = "okay"; | |
134 | ||
135 | eeprom1: eeprom@50 { | |
136 | compatible = "atmel,24c02"; | |
137 | reg = <0x50>; | |
138 | pagesize = <16>; | |
139 | }; | |
140 | ||
141 | eeprom2: eeprom@51 { | |
142 | compatible = "atmel,24c02"; | |
143 | reg = <0x51>; | |
144 | pagesize = <16>; | |
145 | }; | |
146 | ||
147 | eeprom3: eeprom@52 { | |
148 | compatible = "atmel,24c02"; | |
149 | reg = <0x52>; | |
150 | pagesize = <16>; | |
151 | }; | |
152 | ||
153 | eeprom4: eeprom@53 { | |
154 | compatible = "atmel,24c02"; | |
155 | reg = <0x53>; | |
156 | pagesize = <16>; | |
157 | }; | |
158 | ||
159 | gpio: pca9555@23 { | |
160 | compatible = "nxp,pca9555"; | |
161 | reg = <0x23>; | |
162 | gpio-controller; | |
163 | #gpio-cells = <2>; | |
164 | }; | |
165 | ||
166 | rtc: ds1672@68 { | |
167 | compatible = "dallas,ds1672"; | |
168 | reg = <0x68>; | |
169 | }; | |
170 | }; | |
171 | ||
172 | &i2c2 { | |
173 | clock-frequency = <100000>; | |
174 | pinctrl-names = "default"; | |
175 | pinctrl-0 = <&pinctrl_i2c2>; | |
176 | status = "okay"; | |
177 | }; | |
178 | ||
179 | &i2c3 { | |
180 | clock-frequency = <100000>; | |
181 | pinctrl-names = "default"; | |
182 | pinctrl-0 = <&pinctrl_i2c3>; | |
183 | status = "okay"; | |
184 | ||
185 | gpio_exp: pca9555@24 { | |
186 | compatible = "nxp,pca9555"; | |
187 | reg = <0x24>; | |
188 | gpio-controller; | |
189 | #gpio-cells = <2>; | |
190 | }; | |
191 | ||
192 | }; | |
193 | ||
194 | &pcie { | |
195 | pinctrl-names = "default"; | |
196 | pinctrl-0 = <&pinctrl_pcie>; | |
197 | reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>; | |
198 | status = "okay"; | |
199 | }; | |
200 | ||
aa2b2178 TH |
201 | &pwm2 { |
202 | pinctrl-names = "default"; | |
203 | pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ | |
204 | status = "disabled"; | |
205 | }; | |
206 | ||
207 | &pwm3 { | |
208 | pinctrl-names = "default"; | |
209 | pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ | |
210 | status = "disabled"; | |
211 | }; | |
212 | ||
e9d6d6b6 TH |
213 | &ssi1 { |
214 | status = "okay"; | |
215 | }; | |
216 | ||
217 | &uart2 { | |
218 | pinctrl-names = "default"; | |
219 | pinctrl-0 = <&pinctrl_uart2>; | |
220 | status = "okay"; | |
221 | }; | |
222 | ||
223 | &uart3 { | |
224 | pinctrl-names = "default"; | |
225 | pinctrl-0 = <&pinctrl_uart3>; | |
226 | status = "okay"; | |
227 | }; | |
228 | ||
229 | &usbotg { | |
230 | vbus-supply = <®_usb_otg_vbus>; | |
231 | pinctrl-names = "default"; | |
232 | pinctrl-0 = <&pinctrl_usbotg>; | |
233 | disable-over-current; | |
234 | status = "okay"; | |
235 | }; | |
236 | ||
237 | &usbh1 { | |
238 | vbus-supply = <®_usb_h1_vbus>; | |
239 | status = "okay"; | |
240 | }; | |
241 | ||
242 | &iomuxc { | |
243 | imx6qdl-gw51xx { | |
244 | pinctrl_flexcan1: flexcan1grp { | |
245 | fsl,pins = < | |
246 | MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 | |
247 | MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 | |
248 | MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */ | |
249 | >; | |
250 | }; | |
251 | ||
252 | pinctrl_gpio_leds: gpioledsgrp { | |
253 | fsl,pins = < | |
254 | MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 | |
255 | >; | |
256 | }; | |
257 | ||
258 | pinctrl_gpmi_nand: gpminandgrp { | |
259 | fsl,pins = < | |
260 | MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 | |
261 | MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 | |
262 | MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 | |
263 | MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 | |
264 | MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 | |
e9d6d6b6 TH |
265 | MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 |
266 | MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 | |
267 | MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 | |
268 | MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 | |
269 | MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 | |
270 | MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 | |
271 | MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 | |
272 | MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 | |
273 | MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 | |
274 | MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 | |
275 | >; | |
276 | }; | |
277 | ||
278 | pinctrl_i2c1: i2c1grp { | |
279 | fsl,pins = < | |
280 | MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 | |
281 | MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 | |
282 | >; | |
283 | }; | |
284 | ||
285 | pinctrl_i2c2: i2c2grp { | |
286 | fsl,pins = < | |
287 | MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 | |
288 | MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 | |
289 | >; | |
290 | }; | |
291 | ||
292 | pinctrl_i2c3: i2c3grp { | |
293 | fsl,pins = < | |
294 | MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 | |
295 | MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 | |
296 | >; | |
297 | }; | |
298 | ||
299 | pinctrl_pcie: pciegrp { | |
300 | fsl,pins = < | |
301 | MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */ | |
302 | >; | |
303 | }; | |
304 | ||
aa2b2178 TH |
305 | pinctrl_pwm2: pwm2grp { |
306 | fsl,pins = < | |
307 | MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 | |
308 | >; | |
309 | }; | |
310 | ||
311 | pinctrl_pwm3: pwm3grp { | |
312 | fsl,pins = < | |
313 | MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 | |
314 | >; | |
315 | }; | |
316 | ||
e9d6d6b6 TH |
317 | pinctrl_uart2: uart2grp { |
318 | fsl,pins = < | |
319 | MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 | |
320 | MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 | |
321 | >; | |
322 | }; | |
323 | ||
324 | pinctrl_uart3: uart3grp { | |
325 | fsl,pins = < | |
326 | MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 | |
327 | MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 | |
328 | >; | |
329 | }; | |
330 | ||
331 | pinctrl_usbotg: usbotggrp { | |
332 | fsl,pins = < | |
333 | MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 | |
334 | >; | |
335 | }; | |
336 | }; | |
337 | }; |