projects / deliverable / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
Merge remote-tracking branch 'asoc/fix/omap' into asoc-linus
[deliverable/linux.git] / arch / arm / boot / dts / imx6sx.dtsi
CommitLineData
b1d17f68
SG		 1/*
2 * Copyright 2014 Freescale Semiconductor, Inc.
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8
9#include <dt-bindings/clock/imx6sx-clock.h>
10#include <dt-bindings/gpio/gpio.h>
11#include <dt-bindings/interrupt-controller/arm-gic.h>
12#include "imx6sx-pinfunc.h"
13#include "skeleton.dtsi"
14
15/ {
16 aliases {
17 can0 = &flexcan1;
18 can1 = &flexcan2;
19 ethernet0 = &fec1;
20 ethernet1 = &fec2;
21 gpio0 = &gpio1;
22 gpio1 = &gpio2;
23 gpio2 = &gpio3;
24 gpio3 = &gpio4;
25 gpio4 = &gpio5;
26 gpio5 = &gpio6;
27 gpio6 = &gpio7;
28 i2c0 = &i2c1;
29 i2c1 = &i2c2;
30 i2c2 = &i2c3;
31 i2c3 = &i2c4;
32 mmc0 = &usdhc1;
33 mmc1 = &usdhc2;
34 mmc2 = &usdhc3;
35 mmc3 = &usdhc4;
36 serial0 = &uart1;
37 serial1 = &uart2;
38 serial2 = &uart3;
39 serial3 = &uart4;
40 serial4 = &uart5;
41 serial5 = &uart6;
42 spi0 = &ecspi1;
43 spi1 = &ecspi2;
44 spi2 = &ecspi3;
45 spi3 = &ecspi4;
46 spi4 = &ecspi5;
47 usbphy0 = &usbphy1;
48 usbphy1 = &usbphy2;
49 };
50
51 cpus {
52 #address-cells = <1>;
53 #size-cells = <0>;
54
55 cpu0: cpu@0 {
56 compatible = "arm,cortex-a9";
57 device_type = "cpu";
58 reg = <0>;
59 next-level-cache = <&L2>;
60 operating-points = <
61 /* kHz uV */
62 996000 1250000
63 792000 1175000
64 396000 1075000
65 >;
66 fsl,soc-operating-points = <
67 /* ARM kHz SOC uV */
68 996000 1175000
69 792000 1175000
70 396000 1175000
71 >;
72 clock-latency = <61036>; /* two CLK32 periods */
73 clocks = <&clks IMX6SX_CLK_ARM>,
74 <&clks IMX6SX_CLK_PLL2_PFD2>,
75 <&clks IMX6SX_CLK_STEP>,
76 <&clks IMX6SX_CLK_PLL1_SW>,
77 <&clks IMX6SX_CLK_PLL1_SYS>;
78 clock-names = "arm", "pll2_pfd2_396m", "step",
79 "pll1_sw", "pll1_sys";
80 arm-supply = <&reg_arm>;
81 soc-supply = <&reg_soc>;
82 };
83 };
84
85 intc: interrupt-controller@00a01000 {
86 compatible = "arm,cortex-a9-gic";
87 #interrupt-cells = <3>;
88 interrupt-controller;
89 reg = <0x00a01000 0x1000>,
90 <0x00a00100 0x100>;
91 };
92
93 clocks {
94 #address-cells = <1>;
95 #size-cells = <0>;
96
97 ckil: clock@0 {
98 compatible = "fixed-clock";
99 reg = <0>;
100 #clock-cells = <0>;
101 clock-frequency = <32768>;
102 clock-output-names = "ckil";
103 };
104
105 osc: clock@1 {
106 compatible = "fixed-clock";
107 reg = <1>;
108 #clock-cells = <0>;
109 clock-frequency = <24000000>;
110 clock-output-names = "osc";
111 };
112
113 ipp_di0: clock@2 {
114 compatible = "fixed-clock";
115 reg = <2>;
116 #clock-cells = <0>;
117 clock-frequency = <0>;
118 clock-output-names = "ipp_di0";
119 };
120
121 ipp_di1: clock@3 {
122 compatible = "fixed-clock";
123 reg = <3>;
124 #clock-cells = <0>;
125 clock-frequency = <0>;
126 clock-output-names = "ipp_di1";
127 };
128 };
129
130 soc {
131 #address-cells = <1>;
132 #size-cells = <1>;
133 compatible = "simple-bus";
134 interrupt-parent = <&intc>;
135 ranges;
136
137 pmu {
138 compatible = "arm,cortex-a9-pmu";
139 interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
140 };
141
142 ocram: sram@00900000 {
143 compatible = "mmio-sram";
144 reg = <0x00900000 0x20000>;
145 clocks = <&clks IMX6SX_CLK_OCRAM>;
146 };
147
148 L2: l2-cache@00a02000 {
149 compatible = "arm,pl310-cache";
150 reg = <0x00a02000 0x1000>;
151 interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
152 cache-unified;
153 cache-level = <2>;
154 arm,tag-latency = <4 2 3>;
155 arm,data-latency = <4 2 3>;
156 };
157
158 dma_apbh: dma-apbh@01804000 {
159 compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh";
160 reg = <0x01804000 0x2000>;
161 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
162 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
163 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
164 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
165 interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
166 #dma-cells = <1>;
167 dma-channels = <4>;
168 clocks = <&clks IMX6SX_CLK_APBH_DMA>;
169 };
170
171 gpmi: gpmi-nand@01806000{
172 compatible = "fsl,imx6sx-gpmi-nand";
173 #address-cells = <1>;
174 #size-cells = <1>;
175 reg = <0x01806000 0x2000>, <0x01808000 0x4000>;
176 reg-names = "gpmi-nand", "bch";
177 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
178 interrupt-names = "bch";
179 clocks = <&clks IMX6SX_CLK_GPMI_IO>,
180 <&clks IMX6SX_CLK_GPMI_APB>,
181 <&clks IMX6SX_CLK_GPMI_BCH>,
182 <&clks IMX6SX_CLK_GPMI_BCH_APB>,
183 <&clks IMX6SX_CLK_PER1_BCH>;
184 clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
185 "gpmi_bch_apb", "per1_bch";
186 dmas = <&dma_apbh 0>;
187 dma-names = "rx-tx";
188 status = "disabled";
189 };
190
191 aips1: aips-bus@02000000 {
192 compatible = "fsl,aips-bus", "simple-bus";
193 #address-cells = <1>;
194 #size-cells = <1>;
195 reg = <0x02000000 0x100000>;
196 ranges;
197
198 spba-bus@02000000 {
199 compatible = "fsl,spba-bus", "simple-bus";
200 #address-cells = <1>;
201 #size-cells = <1>;
202 reg = <0x02000000 0x40000>;
203 ranges;
204
205 spdif: spdif@02004000 {
206 compatible = "fsl,imx6sx-spdif", "fsl,imx35-spdif";
207 reg = <0x02004000 0x4000>;
208 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
209 dmas = <&sdma 14 18 0>,
210 <&sdma 15 18 0>;
211 dma-names = "rx", "tx";
212 clocks = <&clks IMX6SX_CLK_SPDIF>,
213 <&clks IMX6SX_CLK_OSC>,
214 <&clks IMX6SX_CLK_SPDIF>,
215 <&clks 0>, <&clks 0>, <&clks 0>,
216 <&clks IMX6SX_CLK_IPG>,
217 <&clks 0>, <&clks 0>,
218 <&clks IMX6SX_CLK_SPBA>;
219 clock-names = "core", "rxtx0",
220 "rxtx1", "rxtx2",
221 "rxtx3", "rxtx4",
222 "rxtx5", "rxtx6",
223 "rxtx7", "dma";
224 status = "disabled";
225 };
226
227 ecspi1: ecspi@02008000 {
228 #address-cells = <1>;
229 #size-cells = <0>;
230 compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
231 reg = <0x02008000 0x4000>;
232 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
233 clocks = <&clks IMX6SX_CLK_ECSPI1>,
234 <&clks IMX6SX_CLK_ECSPI1>;
235 clock-names = "ipg", "per";
236 status = "disabled";
237 };
238
239 ecspi2: ecspi@0200c000 {
240 #address-cells = <1>;
241 #size-cells = <0>;
242 compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
243 reg = <0x0200c000 0x4000>;
244 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
245 clocks = <&clks IMX6SX_CLK_ECSPI2>,
246 <&clks IMX6SX_CLK_ECSPI2>;
247 clock-names = "ipg", "per";
248 status = "disabled";
249 };
250
251 ecspi3: ecspi@02010000 {
252 #address-cells = <1>;
253 #size-cells = <0>;
254 compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
255 reg = <0x02010000 0x4000>;
256 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
257 clocks = <&clks IMX6SX_CLK_ECSPI3>,
258 <&clks IMX6SX_CLK_ECSPI3>;
259 clock-names = "ipg", "per";
260 status = "disabled";
261 };
262
263 ecspi4: ecspi@02014000 {
264 #address-cells = <1>;
265 #size-cells = <0>;
266 compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
267 reg = <0x02014000 0x4000>;
268 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
269 clocks = <&clks IMX6SX_CLK_ECSPI4>,
270 <&clks IMX6SX_CLK_ECSPI4>;
271 clock-names = "ipg", "per";
272 status = "disabled";
273 };
274
275 uart1: serial@02020000 {
276 compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
277 reg = <0x02020000 0x4000>;
278 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
279 clocks = <&clks IMX6SX_CLK_UART_IPG>,
280 <&clks IMX6SX_CLK_UART_SERIAL>;
281 clock-names = "ipg", "per";
282 dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
283 dma-names = "rx", "tx";
284 status = "disabled";
285 };
286
287 esai: esai@02024000 {
288 reg = <0x02024000 0x4000>;
289 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
290 clocks = <&clks IMX6SX_CLK_ESAI_IPG>,
291 <&clks IMX6SX_CLK_ESAI_MEM>,
292 <&clks IMX6SX_CLK_ESAI_EXTAL>,
293 <&clks IMX6SX_CLK_ESAI_IPG>,
294 <&clks IMX6SX_CLK_SPBA>;
295 clock-names = "core", "mem", "extal",
296 "fsys", "dma";
297 status = "disabled";
298 };
299
300 ssi1: ssi@02028000 {
6ff7f51e 301 #sound-dai-cells = <0>;
4c03527e 302 compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
b1d17f68
SG		 303 reg = <0x02028000 0x4000>;
304 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
305 clocks = <&clks IMX6SX_CLK_SSI1_IPG>,
306 <&clks IMX6SX_CLK_SSI1>;
307 clock-names = "ipg", "baud";
308 dmas = <&sdma 37 1 0>, <&sdma 38 1 0>;
309 dma-names = "rx", "tx";
3a462a62 310 fsl,fifo-depth = <15>;
b1d17f68
SG		 311 status = "disabled";
312 };
313
314 ssi2: ssi@0202c000 {
6ff7f51e 315 #sound-dai-cells = <0>;
4c03527e 316 compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
b1d17f68
SG		 317 reg = <0x0202c000 0x4000>;
318 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
319 clocks = <&clks IMX6SX_CLK_SSI2_IPG>,
320 <&clks IMX6SX_CLK_SSI2>;
321 clock-names = "ipg", "baud";
322 dmas = <&sdma 41 1 0>, <&sdma 42 1 0>;
323 dma-names = "rx", "tx";
3a462a62 324 fsl,fifo-depth = <15>;
b1d17f68
SG		 325 status = "disabled";
326 };
327
328 ssi3: ssi@02030000 {
6ff7f51e 329 #sound-dai-cells = <0>;
4c03527e 330 compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
b1d17f68
SG		 331 reg = <0x02030000 0x4000>;
332 interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
333 clocks = <&clks IMX6SX_CLK_SSI3_IPG>,
334 <&clks IMX6SX_CLK_SSI3>;
335 clock-names = "ipg", "baud";
336 dmas = <&sdma 45 1 0>, <&sdma 46 1 0>;
337 dma-names = "rx", "tx";
3a462a62 338 fsl,fifo-depth = <15>;
b1d17f68
SG		 339 status = "disabled";
340 };
341
342 asrc: asrc@02034000 {
343 reg = <0x02034000 0x4000>;
344 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
345 clocks = <&clks IMX6SX_CLK_ASRC_MEM>,
346 <&clks IMX6SX_CLK_ASRC_IPG>,
347 <&clks IMX6SX_CLK_SPDIF>,
348 <&clks IMX6SX_CLK_SPBA>;
349 clock-names = "mem", "ipg", "asrck", "dma";
350 dmas = <&sdma 17 20 1>, <&sdma 18 20 1>,
351 <&sdma 19 20 1>, <&sdma 20 20 1>,
352 <&sdma 21 20 1>, <&sdma 22 20 1>;
353 dma-names = "rxa", "rxb", "rxc",
354 "txa", "txb", "txc";
355 status = "okay";
356 };
357 };
358
359 pwm1: pwm@02080000 {
360 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
361 reg = <0x02080000 0x4000>;
362 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
363 clocks = <&clks IMX6SX_CLK_PWM1>,
364 <&clks IMX6SX_CLK_PWM1>;
365 clock-names = "ipg", "per";
366 #pwm-cells = <2>;
367 };
368
369 pwm2: pwm@02084000 {
370 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
371 reg = <0x02084000 0x4000>;
372 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
373 clocks = <&clks IMX6SX_CLK_PWM2>,
374 <&clks IMX6SX_CLK_PWM2>;
375 clock-names = "ipg", "per";
376 #pwm-cells = <2>;
377 };
378
379 pwm3: pwm@02088000 {
380 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
381 reg = <0x02088000 0x4000>;
382 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
383 clocks = <&clks IMX6SX_CLK_PWM3>,
384 <&clks IMX6SX_CLK_PWM3>;
385 clock-names = "ipg", "per";
386 #pwm-cells = <2>;
387 };
388
389 pwm4: pwm@0208c000 {
390 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
391 reg = <0x0208c000 0x4000>;
392 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
393 clocks = <&clks IMX6SX_CLK_PWM4>,
394 <&clks IMX6SX_CLK_PWM4>;
395 clock-names = "ipg", "per";
396 #pwm-cells = <2>;
397 };
398
399 flexcan1: can@02090000 {
400 compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
401 reg = <0x02090000 0x4000>;
402 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
403 clocks = <&clks IMX6SX_CLK_CAN1_IPG>,
404 <&clks IMX6SX_CLK_CAN1_SERIAL>;
405 clock-names = "ipg", "per";
406 status = "disabled";
407 };
408
409 flexcan2: can@02094000 {
410 compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
411 reg = <0x02094000 0x4000>;
412 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
413 clocks = <&clks IMX6SX_CLK_CAN2_IPG>,
414 <&clks IMX6SX_CLK_CAN2_SERIAL>;
415 clock-names = "ipg", "per";
416 status = "disabled";
417 };
418
419 gpt: gpt@02098000 {
420 compatible = "fsl,imx6sx-gpt", "fsl,imx31-gpt";
421 reg = <0x02098000 0x4000>;
422 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
423 clocks = <&clks IMX6SX_CLK_GPT_BUS>,
2b2244a3 424 <&clks IMX6SX_CLK_GPT_3M>;
b1d17f68
SG		 425 clock-names = "ipg", "per";
426 };
427
428 gpio1: gpio@0209c000 {
429 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
430 reg = <0x0209c000 0x4000>;
431 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
432 <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
433 gpio-controller;
434 #gpio-cells = <2>;
435 interrupt-controller;
436 #interrupt-cells = <2>;
437 };
438
439 gpio2: gpio@020a0000 {
440 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
441 reg = <0x020a0000 0x4000>;
442 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
443 <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
444 gpio-controller;
445 #gpio-cells = <2>;
446 interrupt-controller;
447 #interrupt-cells = <2>;
448 };
449
450 gpio3: gpio@020a4000 {
451 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
452 reg = <0x020a4000 0x4000>;
453 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
454 <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
455 gpio-controller;
456 #gpio-cells = <2>;
457 interrupt-controller;
458 #interrupt-cells = <2>;
459 };
460
461 gpio4: gpio@020a8000 {
462 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
463 reg = <0x020a8000 0x4000>;
464 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
465 <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
466 gpio-controller;
467 #gpio-cells = <2>;
468 interrupt-controller;
469 #interrupt-cells = <2>;
470 };
471
472 gpio5: gpio@020ac000 {
473 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
474 reg = <0x020ac000 0x4000>;
475 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
476 <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
477 gpio-controller;
478 #gpio-cells = <2>;
479 interrupt-controller;
480 #interrupt-cells = <2>;
481 };
482
483 gpio6: gpio@020b0000 {
484 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
485 reg = <0x020b0000 0x4000>;
486 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
487 <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
488 gpio-controller;
489 #gpio-cells = <2>;
490 interrupt-controller;
491 #interrupt-cells = <2>;
492 };
493
494 gpio7: gpio@020b4000 {
495 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
496 reg = <0x020b4000 0x4000>;
497 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
498 <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
499 gpio-controller;
500 #gpio-cells = <2>;
501 interrupt-controller;
502 #interrupt-cells = <2>;
503 };
504
505 kpp: kpp@020b8000 {
506 compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp";
507 reg = <0x020b8000 0x4000>;
508 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
509 clocks = <&clks IMX6SX_CLK_DUMMY>;
510 status = "disabled";
511 };
512
513 wdog1: wdog@020bc000 {
514 compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
515 reg = <0x020bc000 0x4000>;
516 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
517 clocks = <&clks IMX6SX_CLK_DUMMY>;
518 };
519
520 wdog2: wdog@020c0000 {
521 compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
522 reg = <0x020c0000 0x4000>;
523 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
524 clocks = <&clks IMX6SX_CLK_DUMMY>;
525 status = "disabled";
526 };
527
528 clks: ccm@020c4000 {
529 compatible = "fsl,imx6sx-ccm";
530 reg = <0x020c4000 0x4000>;
531 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
532 <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
533 #clock-cells = <1>;
534 clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
535 clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
536 };
537
538 anatop: anatop@020c8000 {
539 compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop",
540 "syscon", "simple-bus";
541 reg = <0x020c8000 0x1000>;
542 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
543 <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
544 <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
545
546 regulator-1p1@110 {
547 compatible = "fsl,anatop-regulator";
548 regulator-name = "vdd1p1";
549 regulator-min-microvolt = <800000>;
550 regulator-max-microvolt = <1375000>;
551 regulator-always-on;
552 anatop-reg-offset = <0x110>;
553 anatop-vol-bit-shift = <8>;
554 anatop-vol-bit-width = <5>;
555 anatop-min-bit-val = <4>;
556 anatop-min-voltage = <800000>;
557 anatop-max-voltage = <1375000>;
558 };
559
560 regulator-3p0@120 {
561 compatible = "fsl,anatop-regulator";
562 regulator-name = "vdd3p0";
563 regulator-min-microvolt = <2800000>;
564 regulator-max-microvolt = <3150000>;
565 regulator-always-on;
566 anatop-reg-offset = <0x120>;
567 anatop-vol-bit-shift = <8>;
568 anatop-vol-bit-width = <5>;
569 anatop-min-bit-val = <0>;
570 anatop-min-voltage = <2625000>;
571 anatop-max-voltage = <3400000>;
572 };
573
574 regulator-2p5@130 {
575 compatible = "fsl,anatop-regulator";
576 regulator-name = "vdd2p5";
577 regulator-min-microvolt = <2100000>;
578 regulator-max-microvolt = <2875000>;
579 regulator-always-on;
580 anatop-reg-offset = <0x130>;
581 anatop-vol-bit-shift = <8>;
582 anatop-vol-bit-width = <5>;
583 anatop-min-bit-val = <0>;
584 anatop-min-voltage = <2100000>;
585 anatop-max-voltage = <2875000>;
586 };
587
588 reg_arm: regulator-vddcore@140 {
589 compatible = "fsl,anatop-regulator";
f78a5975 590 regulator-name = "vddarm";
b1d17f68
SG		 591 regulator-min-microvolt = <725000>;
592 regulator-max-microvolt = <1450000>;
593 regulator-always-on;
594 anatop-reg-offset = <0x140>;
595 anatop-vol-bit-shift = <0>;
596 anatop-vol-bit-width = <5>;
597 anatop-delay-reg-offset = <0x170>;
598 anatop-delay-bit-shift = <24>;
599 anatop-delay-bit-width = <2>;
600 anatop-min-bit-val = <1>;
601 anatop-min-voltage = <725000>;
602 anatop-max-voltage = <1450000>;
603 };
604
605 reg_pcie: regulator-vddpcie@140 {
606 compatible = "fsl,anatop-regulator";
607 regulator-name = "vddpcie";
608 regulator-min-microvolt = <725000>;
609 regulator-max-microvolt = <1450000>;
610 anatop-reg-offset = <0x140>;
611 anatop-vol-bit-shift = <9>;
612 anatop-vol-bit-width = <5>;
613 anatop-delay-reg-offset = <0x170>;
614 anatop-delay-bit-shift = <26>;
615 anatop-delay-bit-width = <2>;
616 anatop-min-bit-val = <1>;
617 anatop-min-voltage = <725000>;
618 anatop-max-voltage = <1450000>;
619 };
620
621 reg_soc: regulator-vddsoc@140 {
622 compatible = "fsl,anatop-regulator";
623 regulator-name = "vddsoc";
624 regulator-min-microvolt = <725000>;
625 regulator-max-microvolt = <1450000>;
626 regulator-always-on;
627 anatop-reg-offset = <0x140>;
628 anatop-vol-bit-shift = <18>;
629 anatop-vol-bit-width = <5>;
630 anatop-delay-reg-offset = <0x170>;
631 anatop-delay-bit-shift = <28>;
632 anatop-delay-bit-width = <2>;
633 anatop-min-bit-val = <1>;
634 anatop-min-voltage = <725000>;
635 anatop-max-voltage = <1450000>;
636 };
637 };
638
639 tempmon: tempmon {
640 compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
641 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
642 fsl,tempmon = <&anatop>;
643 fsl,tempmon-data = <&ocotp>;
644 clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
645 };
646
647 usbphy1: usbphy@020c9000 {
648 compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
649 reg = <0x020c9000 0x1000>;
650 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
651 clocks = <&clks IMX6SX_CLK_USBPHY1>;
652 fsl,anatop = <&anatop>;
653 };
654
655 usbphy2: usbphy@020ca000 {
656 compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
657 reg = <0x020ca000 0x1000>;
658 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
659 clocks = <&clks IMX6SX_CLK_USBPHY2>;
660 fsl,anatop = <&anatop>;
661 };
662
663 snvs: snvs@020cc000 {
664 compatible = "fsl,sec-v4.0-mon", "simple-bus";
665 #address-cells = <1>;
666 #size-cells = <1>;
667 ranges = <0 0x020cc000 0x4000>;
668
669 snvs-rtc-lp@34 {
670 compatible = "fsl,sec-v4.0-mon-rtc-lp";
671 reg = <0x34 0x58>;
672 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
673 };
422b0676
RG		 674
675 snvs_poweroff: snvs-poweroff@38 {
676 compatible = "fsl,sec-v4.0-poweroff";
677 reg = <0x38 0x4>;
678 status = "disabled";
679 };
b1d17f68
SG		 680 };
681
682 epit1: epit@020d0000 {
683 reg = <0x020d0000 0x4000>;
684 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
685 };
686
687 epit2: epit@020d4000 {
688 reg = <0x020d4000 0x4000>;
689 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
690 };
691
692 src: src@020d8000 {
693 compatible = "fsl,imx6sx-src", "fsl,imx51-src";
694 reg = <0x020d8000 0x4000>;
695 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
696 <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
697 #reset-cells = <1>;
698 };
699
700 gpc: gpc@020dc000 {
701 compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc";
702 reg = <0x020dc000 0x4000>;
703 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
704 };
705
706 iomuxc: iomuxc@020e0000 {
707 compatible = "fsl,imx6sx-iomuxc";
708 reg = <0x020e0000 0x4000>;
709 };
710
711 gpr: iomuxc-gpr@020e4000 {
77e0d1cc
AH		 712 compatible = "fsl,imx6sx-iomuxc-gpr",
713 "fsl,imx6q-iomuxc-gpr", "syscon";
b1d17f68
SG		 714 reg = <0x020e4000 0x4000>;
715 };
716
717 sdma: sdma@020ec000 {
811e7685 718 compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma";
b1d17f68
SG		 719 reg = <0x020ec000 0x4000>;
720 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
721 clocks = <&clks IMX6SX_CLK_SDMA>,
722 <&clks IMX6SX_CLK_SDMA>;
723 clock-names = "ipg", "ahb";
724 #dma-cells = <3>;
aeb88538
FE		 725 /* imx6sx reuses imx6q sdma firmware */
726 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
b1d17f68
SG		 727 };
728 };
729
730 aips2: aips-bus@02100000 {
731 compatible = "fsl,aips-bus", "simple-bus";
732 #address-cells = <1>;
733 #size-cells = <1>;
734 reg = <0x02100000 0x100000>;
735 ranges;
736
737 usbotg1: usb@02184000 {
738 compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
739 reg = <0x02184000 0x200>;
740 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
741 clocks = <&clks IMX6SX_CLK_USBOH3>;
742 fsl,usbphy = <&usbphy1>;
743 fsl,usbmisc = <&usbmisc 0>;
744 fsl,anatop = <&anatop>;
745 status = "disabled";
746 };
747
748 usbotg2: usb@02184200 {
749 compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
750 reg = <0x02184200 0x200>;
751 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
752 clocks = <&clks IMX6SX_CLK_USBOH3>;
753 fsl,usbphy = <&usbphy2>;
754 fsl,usbmisc = <&usbmisc 1>;
755 status = "disabled";
756 };
757
758 usbh: usb@02184400 {
759 compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
760 reg = <0x02184400 0x200>;
761 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
762 clocks = <&clks IMX6SX_CLK_USBOH3>;
763 fsl,usbmisc = <&usbmisc 2>;
764 phy_type = "hsic";
765 fsl,anatop = <&anatop>;
766 status = "disabled";
767 };
768
769 usbmisc: usbmisc@02184800 {
770 #index-cells = <1>;
b29f4fa1 771 compatible = "fsl,imx6sx-usbmisc", "fsl,imx6q-usbmisc";
b1d17f68
SG		 772 reg = <0x02184800 0x200>;
773 clocks = <&clks IMX6SX_CLK_USBOH3>;
774 };
775
776 fec1: ethernet@02188000 {
777 compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
778 reg = <0x02188000 0x4000>;
779 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
780 <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
781 clocks = <&clks IMX6SX_CLK_ENET>,
782 <&clks IMX6SX_CLK_ENET_AHB>,
783 <&clks IMX6SX_CLK_ENET_PTP>,
784 <&clks IMX6SX_CLK_ENET_REF>,
785 <&clks IMX6SX_CLK_ENET_PTP>;
786 clock-names = "ipg", "ahb", "ptp",
787 "enet_clk_ref", "enet_out";
0afdfe95
FL		 788 fsl,num-tx-queues=<3>;
789 fsl,num-rx-queues=<3>;
b1d17f68
SG		 790 status = "disabled";
791 };
792
793 mlb: mlb@0218c000 {
794 reg = <0x0218c000 0x4000>;
795 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
796 <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
797 <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
798 clocks = <&clks IMX6SX_CLK_MLB>;
799 status = "disabled";
800 };
801
802 usdhc1: usdhc@02190000 {
803 compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
804 reg = <0x02190000 0x4000>;
805 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
806 clocks = <&clks IMX6SX_CLK_USDHC1>,
807 <&clks IMX6SX_CLK_USDHC1>,
808 <&clks IMX6SX_CLK_USDHC1>;
809 clock-names = "ipg", "ahb", "per";
810 bus-width = <4>;
811 status = "disabled";
812 };
813
814 usdhc2: usdhc@02194000 {
815 compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
816 reg = <0x02194000 0x4000>;
817 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
818 clocks = <&clks IMX6SX_CLK_USDHC2>,
819 <&clks IMX6SX_CLK_USDHC2>,
820 <&clks IMX6SX_CLK_USDHC2>;
821 clock-names = "ipg", "ahb", "per";
822 bus-width = <4>;
823 status = "disabled";
824 };
825
826 usdhc3: usdhc@02198000 {
827 compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
828 reg = <0x02198000 0x4000>;
829 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
830 clocks = <&clks IMX6SX_CLK_USDHC3>,
831 <&clks IMX6SX_CLK_USDHC3>,
832 <&clks IMX6SX_CLK_USDHC3>;
833 clock-names = "ipg", "ahb", "per";
834 bus-width = <4>;
835 status = "disabled";
836 };
837
838 usdhc4: usdhc@0219c000 {
839 compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
840 reg = <0x0219c000 0x4000>;
841 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
842 clocks = <&clks IMX6SX_CLK_USDHC4>,
843 <&clks IMX6SX_CLK_USDHC4>,
844 <&clks IMX6SX_CLK_USDHC4>;
845 clock-names = "ipg", "ahb", "per";
846 bus-width = <4>;
847 status = "disabled";
848 };
849
850 i2c1: i2c@021a0000 {
851 #address-cells = <1>;
852 #size-cells = <0>;
853 compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
854 reg = <0x021a0000 0x4000>;
855 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
856 clocks = <&clks IMX6SX_CLK_I2C1>;
857 status = "disabled";
858 };
859
860 i2c2: i2c@021a4000 {
861 #address-cells = <1>;
862 #size-cells = <0>;
863 compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
864 reg = <0x021a4000 0x4000>;
865 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
866 clocks = <&clks IMX6SX_CLK_I2C2>;
867 status = "disabled";
868 };
869
870 i2c3: i2c@021a8000 {
871 #address-cells = <1>;
872 #size-cells = <0>;
873 compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
874 reg = <0x021a8000 0x4000>;
875 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
876 clocks = <&clks IMX6SX_CLK_I2C3>;
877 status = "disabled";
878 };
879
880 mmdc: mmdc@021b0000 {
881 compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc";
882 reg = <0x021b0000 0x4000>;
883 };
884
885 fec2: ethernet@021b4000 {
9863aba5 886 compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
b1d17f68
SG		 887 reg = <0x021b4000 0x4000>;
888 interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
889 <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
890 clocks = <&clks IMX6SX_CLK_ENET>,
891 <&clks IMX6SX_CLK_ENET_AHB>,
892 <&clks IMX6SX_CLK_ENET_PTP>,
893 <&clks IMX6SX_CLK_ENET2_REF_125M>,
894 <&clks IMX6SX_CLK_ENET_PTP>;
895 clock-names = "ipg", "ahb", "ptp",
896 "enet_clk_ref", "enet_out";
897 status = "disabled";
898 };
899
900 weim: weim@021b8000 {
901 compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim";
902 reg = <0x021b8000 0x4000>;
903 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
904 clocks = <&clks IMX6SX_CLK_EIM_SLOW>;
905 };
906
907 ocotp: ocotp@021bc000 {
908 compatible = "fsl,imx6sx-ocotp", "syscon";
909 reg = <0x021bc000 0x4000>;
910 clocks = <&clks IMX6SX_CLK_OCOTP>;
911 };
912
913 sai1: sai@021d4000 {
914 compatible = "fsl,imx6sx-sai";
915 reg = <0x021d4000 0x4000>;
916 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
917 clocks = <&clks IMX6SX_CLK_SAI1_IPG>,
918 <&clks IMX6SX_CLK_SAI1>,
919 <&clks 0>, <&clks 0>;
920 clock-names = "bus", "mclk1", "mclk2", "mclk3";
921 dma-names = "rx", "tx";
922 dmas = <&sdma 31 23 0>, <&sdma 32 23 0>;
923 dma-source = <&gpr 0 15 0 16>;
924 status = "disabled";
925 };
926
927 audmux: audmux@021d8000 {
928 compatible = "fsl,imx6sx-audmux", "fsl,imx31-audmux";
929 reg = <0x021d8000 0x4000>;
930 status = "disabled";
931 };
932
933 sai2: sai@021dc000 {
934 compatible = "fsl,imx6sx-sai";
935 reg = <0x021dc000 0x4000>;
936 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
937 clocks = <&clks IMX6SX_CLK_SAI2_IPG>,
938 <&clks IMX6SX_CLK_SAI2>,
939 <&clks 0>, <&clks 0>;
940 clock-names = "bus", "mclk1", "mclk2", "mclk3";
941 dma-names = "rx", "tx";
942 dmas = <&sdma 33 23 0>, <&sdma 34 23 0>;
943 dma-source = <&gpr 0 17 0 18>;
944 status = "disabled";
945 };
946
947 qspi1: qspi@021e0000 {
948 #address-cells = <1>;
949 #size-cells = <0>;
950 compatible = "fsl,imx6sx-qspi";
951 reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
952 reg-names = "QuadSPI", "QuadSPI-memory";
953 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
954 clocks = <&clks IMX6SX_CLK_QSPI1>,
955 <&clks IMX6SX_CLK_QSPI1>;
956 clock-names = "qspi_en", "qspi";
957 status = "disabled";
958 };
959
960 qspi2: qspi@021e4000 {
961 #address-cells = <1>;
962 #size-cells = <0>;
963 compatible = "fsl,imx6sx-qspi";
964 reg = <0x021e4000 0x4000>, <0x70000000 0x10000000>;
965 reg-names = "QuadSPI", "QuadSPI-memory";
966 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
967 clocks = <&clks IMX6SX_CLK_QSPI2>,
968 <&clks IMX6SX_CLK_QSPI2>;
969 clock-names = "qspi_en", "qspi";
970 status = "disabled";
971 };
972
973 uart2: serial@021e8000 {
974 compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
975 reg = <0x021e8000 0x4000>;
976 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
977 clocks = <&clks IMX6SX_CLK_UART_IPG>,
978 <&clks IMX6SX_CLK_UART_SERIAL>;
979 clock-names = "ipg", "per";
980 dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
981 dma-names = "rx", "tx";
982 status = "disabled";
983 };
984
985 uart3: serial@021ec000 {
986 compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
987 reg = <0x021ec000 0x4000>;
988 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
989 clocks = <&clks IMX6SX_CLK_UART_IPG>,
990 <&clks IMX6SX_CLK_UART_SERIAL>;
991 clock-names = "ipg", "per";
992 dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
993 dma-names = "rx", "tx";
994 status = "disabled";
995 };
996
997 uart4: serial@021f0000 {
998 compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
999 reg = <0x021f0000 0x4000>;
1000 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
1001 clocks = <&clks IMX6SX_CLK_UART_IPG>,
1002 <&clks IMX6SX_CLK_UART_SERIAL>;
1003 clock-names = "ipg", "per";
1004 dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
1005 dma-names = "rx", "tx";
1006 status = "disabled";
1007 };
1008
1009 uart5: serial@021f4000 {
1010 compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
1011 reg = <0x021f4000 0x4000>;
1012 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
1013 clocks = <&clks IMX6SX_CLK_UART_IPG>,
1014 <&clks IMX6SX_CLK_UART_SERIAL>;
1015 clock-names = "ipg", "per";
1016 dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
1017 dma-names = "rx", "tx";
1018 status = "disabled";
1019 };
1020
1021 i2c4: i2c@021f8000 {
1022 #address-cells = <1>;
1023 #size-cells = <0>;
1024 compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
1025 reg = <0x021f8000 0x4000>;
1026 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
1027 clocks = <&clks IMX6SX_CLK_I2C4>;
1028 status = "disabled";
1029 };
1030 };
1031
1032 aips3: aips-bus@02200000 {
1033 compatible = "fsl,aips-bus", "simple-bus";
1034 #address-cells = <1>;
1035 #size-cells = <1>;
1036 reg = <0x02200000 0x100000>;
1037 ranges;
1038
1039 spba-bus@02200000 {
1040 compatible = "fsl,spba-bus", "simple-bus";
1041 #address-cells = <1>;
1042 #size-cells = <1>;
1043 reg = <0x02240000 0x40000>;
1044 ranges;
1045
1046 csi1: csi@02214000 {
1047 reg = <0x02214000 0x4000>;
1048 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
1049 clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
1050 <&clks IMX6SX_CLK_CSI>,
1051 <&clks IMX6SX_CLK_DCIC1>;
1052 clock-names = "disp-axi", "csi_mclk", "dcic";
1053 status = "disabled";
1054 };
1055
1056 pxp: pxp@02218000 {
1057 reg = <0x02218000 0x4000>;
1058 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
1059 clocks = <&clks IMX6SX_CLK_PXP_AXI>,
1060 <&clks IMX6SX_CLK_DISPLAY_AXI>;
1061 clock-names = "pxp-axi", "disp-axi";
1062 status = "disabled";
1063 };
1064
1065 csi2: csi@0221c000 {
1066 reg = <0x0221c000 0x4000>;
1067 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
1068 clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
1069 <&clks IMX6SX_CLK_CSI>,
1070 <&clks IMX6SX_CLK_DCIC2>;
1071 clock-names = "disp-axi", "csi_mclk", "dcic";
1072 status = "disabled";
1073 };
1074
1075 lcdif1: lcdif@02220000 {
8c78c407 1076 compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
b1d17f68
SG		 1077 reg = <0x02220000 0x4000>;
1078 interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
1079 clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
1080 <&clks IMX6SX_CLK_LCDIF_APB>,
1081 <&clks IMX6SX_CLK_DISPLAY_AXI>;
1082 clock-names = "pix", "axi", "disp_axi";
1083 status = "disabled";
1084 };
1085
1086 lcdif2: lcdif@02224000 {
8c78c407 1087 compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
b1d17f68
SG		 1088 reg = <0x02224000 0x4000>;
1089 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
1090 clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>,
1091 <&clks IMX6SX_CLK_LCDIF_APB>,
1092 <&clks IMX6SX_CLK_DISPLAY_AXI>;
1093 clock-names = "pix", "axi", "disp_axi";
1094 status = "disabled";
1095 };
1096
1097 vadc: vadc@02228000 {
1098 reg = <0x02228000 0x4000>, <0x0222c000 0x4000>;
1099 reg-names = "vadc-vafe", "vadc-vdec";
1100 clocks = <&clks IMX6SX_CLK_VADC>,
1101 <&clks IMX6SX_CLK_CSI>;
1102 clock-names = "vadc", "csi";
1103 status = "disabled";
1104 };
1105 };
1106
1107 adc1: adc@02280000 {
1108 compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
1109 reg = <0x02280000 0x4000>;
1110 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
1111 clocks = <&clks IMX6SX_CLK_IPG>;
1112 clock-names = "adc";
1113 status = "disabled";
1114 };
1115
1116 adc2: adc@02284000 {
1117 compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
1118 reg = <0x02284000 0x4000>;
1119 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
1120 clocks = <&clks IMX6SX_CLK_IPG>;
1121 clock-names = "adc";
1122 status = "disabled";
1123 };
1124
1125 wdog3: wdog@02288000 {
1126 compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
1127 reg = <0x02288000 0x4000>;
1128 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
1129 clocks = <&clks IMX6SX_CLK_DUMMY>;
1130 status = "disabled";
1131 };
1132
1133 ecspi5: ecspi@0228c000 {
1134 #address-cells = <1>;
1135 #size-cells = <0>;
1136 compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
1137 reg = <0x0228c000 0x4000>;
1138 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
1139 clocks = <&clks IMX6SX_CLK_ECSPI5>,
1140 <&clks IMX6SX_CLK_ECSPI5>;
1141 clock-names = "ipg", "per";
1142 status = "disabled";
1143 };
1144
1145 uart6: serial@022a0000 {
1146 compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
1147 reg = <0x022a0000 0x4000>;
1148 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
1149 clocks = <&clks IMX6SX_CLK_UART_IPG>,
1150 <&clks IMX6SX_CLK_UART_SERIAL>;
1151 clock-names = "ipg", "per";
1152 dmas = <&sdma 0 4 0>, <&sdma 47 4 0>;
1153 dma-names = "rx", "tx";
1154 status = "disabled";
1155 };
1156
1157 pwm5: pwm@022a4000 {
1158 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
1159 reg = <0x022a4000 0x4000>;
1160 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
1161 clocks = <&clks IMX6SX_CLK_PWM5>,
1162 <&clks IMX6SX_CLK_PWM5>;
1163 clock-names = "ipg", "per";
1164 #pwm-cells = <2>;
1165 };
1166
1167 pwm6: pwm@022a8000 {
1168 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
1169 reg = <0x022a8000 0x4000>;
1170 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
1171 clocks = <&clks IMX6SX_CLK_PWM6>,
1172 <&clks IMX6SX_CLK_PWM6>;
1173 clock-names = "ipg", "per";
1174 #pwm-cells = <2>;
1175 };
1176
1177 pwm7: pwm@022ac000 {
1178 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
1179 reg = <0x022ac000 0x4000>;
1180 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
1181 clocks = <&clks IMX6SX_CLK_PWM7>,
1182 <&clks IMX6SX_CLK_PWM7>;
1183 clock-names = "ipg", "per";
1184 #pwm-cells = <2>;
1185 };
1186
1187 pwm8: pwm@0022b0000 {
1188 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
1189 reg = <0x0022b0000 0x4000>;
1190 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
1191 clocks = <&clks IMX6SX_CLK_PWM8>,
1192 <&clks IMX6SX_CLK_PWM8>;
1193 clock-names = "ipg", "per";
1194 #pwm-cells = <2>;
1195 };
1196 };
1197
1198 pcie: pcie@0x08000000 {
1199 compatible = "fsl,imx6sx-pcie", "snps,dw-pcie";
1200 reg = <0x08ffc000 0x4000>; /* DBI */
1201 #address-cells = <3>;
1202 #size-cells = <2>;
1203 device_type = "pci";
1204 /* configuration space */
1205 ranges = <0x00000800 0 0x08f00000 0x08f00000 0 0x00080000
1206 /* downstream I/O */
1207 0x81000000 0 0 0x08f80000 0 0x00010000
1208 /* non-prefetchable memory */
1209 0x82000000 0 0x08000000 0x08000000 0 0x00f00000>;
1210 num-lanes = <1>;
1211 interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
1212 clocks = <&clks IMX6SX_CLK_PCIE_REF_125M>,
1213 <&clks IMX6SX_CLK_PCIE_AXI>,
1214 <&clks IMX6SX_CLK_LVDS1_OUT>,
1215 <&clks IMX6SX_CLK_DISPLAY_AXI>;
1216 clock-names = "pcie_ref_125m", "pcie_axi",
1217 "lvds_gate", "display_axi";
1218 status = "disabled";
1219 };
1220 };
1221};
Linux kernel - Deliverables
This page took 0.139392 seconds and 5 git commands to generate.