[deliverable/linux.git] / arch / arm / boot / dts / kirkwood-lsxl.dtsi

#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"

/ {
	chosen {
		bootargs = "console=ttyS0,115200n8 earlyprintk";
		stdout-path = &uart0;
	};

	ocp@f1000000 {
		pinctrl: pin-controller@10000 {
			pmx_power_hdd: pmx-power-hdd {
				marvell,pins = "mpp10";
				marvell,function = "gpo";
			};
			pmx_usb_vbus: pmx-usb-vbus {
				marvell,pins = "mpp11";
				marvell,function = "gpio";
			};
			pmx_fan_high: pmx-fan-high {
				marvell,pins = "mpp18";
				marvell,function = "gpo";
			};
			pmx_fan_low: pmx-fan-low {
				marvell,pins = "mpp19";
				marvell,function = "gpo";
			};
			pmx_led_function_blue: pmx-led-function-blue {
				marvell,pins = "mpp36";
				marvell,function = "gpio";
			};
			pmx_led_alarm: pmx-led-alarm {
				marvell,pins = "mpp37";
				marvell,function = "gpio";
			};
			pmx_led_info: pmx-led-info {
				marvell,pins = "mpp38";
				marvell,function = "gpio";
			};
			pmx_led_power: pmx-led-power {
				marvell,pins = "mpp39";
				marvell,function = "gpio";
			};
			pmx_fan_lock: pmx-fan-lock {
				marvell,pins = "mpp40";
				marvell,function = "gpio";
			};
			pmx_button_function: pmx-button-function {
				marvell,pins = "mpp41";
				marvell,function = "gpio";
			};
			pmx_power_switch: pmx-power-switch {
				marvell,pins = "mpp42";
				marvell,function = "gpio";
			};
			pmx_power_auto_switch: pmx-power-auto-switch {
				marvell,pins = "mpp43";
				marvell,function = "gpio";
			};
			pmx_led_function_red: pmx-led-function_red {
				marvell,pins = "mpp48";
				marvell,function = "gpio";
			};

		};
		sata@80000 {
			status = "okay";
			nr-ports = <1>;
		};

		spi@10600 {
			status = "okay";

			m25p40@0 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "m25p40", "jedec,spi-nor";
				reg = <0>;
				spi-max-frequency = <25000000>;
				mode = <0>;

				partition@0 {
					reg = <0x0 0x60000>;
					label = "uboot";
					read-only;
				};

				partition@60000 {
					reg = <0x60000 0x10000>;
					label = "dtb";
					read-only;
				};

				partition@70000 {
					reg = <0x70000 0x10000>;
					label = "uboot_env";
				};
			};
		};
	};

	gpio_keys {
		compatible = "gpio-keys";
		#address-cells = <1>;
		#size-cells = <0>;
		pinctrl-0 = <&pmx_button_function &pmx_power_switch
			     &pmx_power_auto_switch>;
		pinctrl-names = "default";

		button@1 {
			label = "Function Button";
			linux,code = <KEY_OPTION>;
			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
		};
		button@2 {
			label = "Power-on Switch";
			linux,code = <KEY_RESERVED>;
			linux,input-type = <5>;
			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
		};
		button@3 {
			label = "Power-auto Switch";
			linux,code = <KEY_ESC>;
			linux,input-type = <5>;
			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
		};
	};

	gpio_leds {
		compatible = "gpio-leds";
		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
			     &pmx_led_info &pmx_led_power
			     &pmx_led_function_blue>;
		pinctrl-names = "default";

		led@1 {
			label = "lsxl:blue:func";
			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
		};

		led@2 {
			label = "lsxl:red:alarm";
			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
		};

		led@3 {
			label = "lsxl:amber:info";
			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
		};

		led@4 {
			label = "lsxl:blue:power";
			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
			default-state = "keep";
		};

		led@5 {
			label = "lsxl:red:func";
			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
		};
	};

	gpio_fan {
		compatible = "gpio-fan";
		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
		pinctrl-names = "default";
		gpios = <&gpio0 19 GPIO_ACTIVE_LOW
		         &gpio0 18 GPIO_ACTIVE_LOW>;
		gpio-fan,speed-map = <0    3
		                      1500 2
		                      3250 1
		                      5000 0>;
		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
	};

	restart_poweroff {
		compatible = "restart-poweroff";
	};

	regulators {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <0>;
		pinctrl-0 = <&pmx_power_hdd &pmx_usb_vbus>;
		pinctrl-names = "default";

		usb_power: regulator@1 {
			compatible = "regulator-fixed";
			reg = <1>;
			regulator-name = "USB Power";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			enable-active-high;
			regulator-always-on;
			regulator-boot-on;
			gpio = <&gpio0 11 0>;
		};
		hdd_power: regulator@2 {
			compatible = "regulator-fixed";
			reg = <2>;
			regulator-name = "HDD Power";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			enable-active-high;
			regulator-always-on;
			regulator-boot-on;
			gpio = <&gpio0 10 0>;
		};
	};
};

&mdio {
	status = "okay";

	ethphy0: ethernet-phy@0 {
		reg = <0>;
	};

	ethphy1: ethernet-phy@8 {
		reg = <8>;
	};
};

&eth0 {
	status = "okay";
	ethernet0-port@0 {
		phy-handle = <&ethphy0>;
	};
};

&eth1 {
	status = "okay";
	ethernet1-port@0 {
		phy-handle = <&ethphy1>;
	};
};
Commit	Line	Data
0ab6129c EG	1	#include "kirkwood.dtsi"
0ab6129c EG	2	#include "kirkwood-6281.dtsi"
4aff38a3 MW	3
	4	/ {
	5	chosen {
	6	bootargs = "console=ttyS0,115200n8 earlyprintk";
ab833614	7	stdout-path = &uart0;
4aff38a3 MW	8	};
	9
	10	ocp@f1000000 {
a9483969	11	pinctrl: pin-controller@10000 {
8d72b4a6 AL	12	pmx_power_hdd: pmx-power-hdd {
	13	marvell,pins = "mpp10";
	14	marvell,function = "gpo";
	15	};
	16	pmx_usb_vbus: pmx-usb-vbus {
	17	marvell,pins = "mpp11";
	18	marvell,function = "gpio";
	19	};
	20	pmx_fan_high: pmx-fan-high {
	21	marvell,pins = "mpp18";
	22	marvell,function = "gpo";
	23	};
	24	pmx_fan_low: pmx-fan-low {
	25	marvell,pins = "mpp19";
	26	marvell,function = "gpo";
	27	};
	28	pmx_led_function_blue: pmx-led-function-blue {
	29	marvell,pins = "mpp36";
	30	marvell,function = "gpio";
	31	};
	32	pmx_led_alarm: pmx-led-alarm {
	33	marvell,pins = "mpp37";
	34	marvell,function = "gpio";
	35	};
	36	pmx_led_info: pmx-led-info {
	37	marvell,pins = "mpp38";
	38	marvell,function = "gpio";
	39	};
	40	pmx_led_power: pmx-led-power {
	41	marvell,pins = "mpp39";
	42	marvell,function = "gpio";
	43	};
	44	pmx_fan_lock: pmx-fan-lock {
	45	marvell,pins = "mpp40";
	46	marvell,function = "gpio";
	47	};
	48	pmx_button_function: pmx-button-function {
	49	marvell,pins = "mpp41";
	50	marvell,function = "gpio";
	51	};
	52	pmx_power_switch: pmx-power-switch {
	53	marvell,pins = "mpp42";
	54	marvell,function = "gpio";
	55	};
	56	pmx_power_auto_switch: pmx-power-auto-switch {
	57	marvell,pins = "mpp43";
	58	marvell,function = "gpio";
	59	};
	60	pmx_led_function_red: pmx-led-function_red {
	61	marvell,pins = "mpp48";
	62	marvell,function = "gpio";
	63	};
	64
	65	};
4aff38a3 MW	66	sata@80000 {
	67	status = "okay";
	68	nr-ports = <1>;
	69	};
	70
	71	spi@10600 {
	72	status = "okay";
	73
	74	m25p40@0 {
	75	#address-cells = <1>;
	76	#size-cells = <1>;
943d45aa	77	compatible = "m25p40", "jedec,spi-nor";
4aff38a3 MW	78	reg = <0>;
	79	spi-max-frequency = <25000000>;
	80	mode = <0>;
	81
	82	partition@0 {
	83	reg = <0x0 0x60000>;
	84	label = "uboot";
	85	read-only;
	86	};
	87
	88	partition@60000 {
	89	reg = <0x60000 0x10000>;
	90	label = "dtb";
	91	read-only;
	92	};
	93
	94	partition@70000 {
	95	reg = <0x70000 0x10000>;
	96	label = "uboot_env";
	97	};
	98	};
	99	};
	100	};
	101
	102	gpio_keys {
	103	compatible = "gpio-keys";
	104	#address-cells = <1>;
	105	#size-cells = <0>;
e5e68b7a TP	106	pinctrl-0 = <&pmx_button_function &pmx_power_switch
	107	&pmx_power_auto_switch>;
	108	pinctrl-names = "default";
	109
4aff38a3 MW	110	button@1 {
4aff38a3 MW	111	label = "Function Button";
23301190	112	linux,code = <KEY_OPTION>;
3a31f2d7	113	gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
4aff38a3 MW	114	};
	115	button@2 {
	116	label = "Power-on Switch";
23301190	117	linux,code = <KEY_RESERVED>;
12431634	118	linux,input-type = <5>;
3a31f2d7	119	gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
4aff38a3 MW	120	};
	121	button@3 {
	122	label = "Power-auto Switch";
23301190	123	linux,code = <KEY_ESC>;
12431634	124	linux,input-type = <5>;
3a31f2d7	125	gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
4aff38a3 MW	126	};
	127	};
	128
	129	gpio_leds {
	130	compatible = "gpio-leds";
e5e68b7a TP	131	pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
	132	&pmx_led_info &pmx_led_power
	133	&pmx_led_function_blue>;
	134	pinctrl-names = "default";
4aff38a3 MW	135
4aff38a3 MW	136	led@1 {
a54841e5	137	label = "lsxl:blue:func";
3a31f2d7	138	gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
4aff38a3 MW	139	};
	140
	141	led@2 {
a54841e5	142	label = "lsxl:red:alarm";
3a31f2d7	143	gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
4aff38a3 MW	144	};
	145
	146	led@3 {
a54841e5	147	label = "lsxl:amber:info";
3a31f2d7	148	gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
4aff38a3 MW	149	};
	150
	151	led@4 {
a54841e5	152	label = "lsxl:blue:power";
3a31f2d7	153	gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
dcdf14c7	154	default-state = "keep";
4aff38a3 MW	155	};
	156
	157	led@5 {
a54841e5	158	label = "lsxl:red:func";
3a31f2d7	159	gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
4aff38a3 MW	160	};
4aff38a3 MW	161	};
b046f560 MW	162
	163	gpio_fan {
	164	compatible = "gpio-fan";
e5e68b7a TP	165	pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
e5e68b7a TP	166	pinctrl-names = "default";
3a31f2d7 AL	167	gpios = <&gpio0 19 GPIO_ACTIVE_LOW
3a31f2d7 AL	168	&gpio0 18 GPIO_ACTIVE_LOW>;
b046f560 MW	169	gpio-fan,speed-map = <0 3
	170	1500 2
	171	3250 1
	172	5000 0>;
3a31f2d7	173	alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
b046f560	174	};
423b8959	175
391a16c7 AL	176	restart_poweroff {
	177	compatible = "restart-poweroff";
	178	};
	179
423b8959 AL	180	regulators {
	181	compatible = "simple-bus";
	182	#address-cells = <1>;
	183	#size-cells = <0>;
e5e68b7a TP	184	pinctrl-0 = <&pmx_power_hdd &pmx_usb_vbus>;
e5e68b7a TP	185	pinctrl-names = "default";
423b8959 AL	186
	187	usb_power: regulator@1 {
	188	compatible = "regulator-fixed";
	189	reg = <1>;
	190	regulator-name = "USB Power";
	191	regulator-min-microvolt = <5000000>;
	192	regulator-max-microvolt = <5000000>;
	193	enable-active-high;
	194	regulator-always-on;
	195	regulator-boot-on;
	196	gpio = <&gpio0 11 0>;
	197	};
	198	hdd_power: regulator@2 {
	199	compatible = "regulator-fixed";
	200	reg = <2>;
	201	regulator-name = "HDD Power";
	202	regulator-min-microvolt = <5000000>;
	203	regulator-max-microvolt = <5000000>;
	204	enable-active-high;
	205	regulator-always-on;
	206	regulator-boot-on;
	207	gpio = <&gpio0 10 0>;
	208	};
	209	};
4aff38a3	210	};
876e2333 SH	211
	212	&mdio {
	213	status = "okay";
	214
	215	ethphy0: ethernet-phy@0 {
876e2333 SH	216	reg = <0>;
	217	};
	218
	219	ethphy1: ethernet-phy@8 {
876e2333 SH	220	reg = <8>;
	221	};
	222	};
	223
	224	&eth0 {
	225	status = "okay";
	226	ethernet0-port@0 {
	227	phy-handle = <&ethphy0>;
	228	};
	229	};
	230
	231	&eth1 {
	232	status = "okay";
	233	ethernet1-port@0 {
	234	phy-handle = <&ethphy1>;
	235	};
	236	};