projects / deliverable / linux.git / blame
| Commit | Line | Data |
|---|---|---|
| e04920d9 RS |
1 | /* |
| 2 | * NXP LPC32xx SoC | |
| 3 | * | |
| 4 | * Copyright 2012 Roland Stigge <stigge@antcom.de> | |
| 5 | * | |
| 6 | * The code contained herein is licensed under the GNU General Public | |
| 7 | * License. You may obtain a copy of the GNU General Public License | |
| 8 | * Version 2 or later at the following locations: | |
| 9 | * | |
| 10 | * http://www.opensource.org/licenses/gpl-license.html | |
| 11 | * http://www.gnu.org/copyleft/gpl.html | |
| 12 | */ | |
| 13 | ||
| 1a24edd2 | 14 | #include "skeleton.dtsi" |
| e04920d9 RS |
15 | |
| 16 | / { | |
| 17 | compatible = "nxp,lpc3220"; | |
| 18 | interrupt-parent = <&mic>; | |
| 19 | ||
| 20 | cpus { | |
| 246d8fc3 | 21 | #address-cells = <1>; |
| 73158b77 LP |
22 | #size-cells = <0>; |
| 23 | ||
| 246d8fc3 | 24 | cpu@0 { |
| 73158b77 LP |
25 | compatible = "arm,arm926ej-s"; |
| 26 | device_type = "cpu"; | |
| 246d8fc3 | 27 | reg = <0x0>; |
| e04920d9 RS |
28 | }; |
| 29 | }; | |
| 30 | ||
| 31 | ahb { | |
| 32 | #address-cells = <1>; | |
| 33 | #size-cells = <1>; | |
| 34 | compatible = "simple-bus"; | |
| f83ee67f VZ |
35 | ranges = <0x20000000 0x20000000 0x30000000>, |
| 36 | <0xe0000000 0xe0000000 0x04000000>; | |
| e04920d9 RS |
37 | |
| 38 | /* | |
| 39 | * Enable either SLC or MLC | |
| 40 | */ | |
| 41 | slc: flash@20020000 { | |
| 42 | compatible = "nxp,lpc3220-slc"; | |
| 43 | reg = <0x20020000 0x1000>; | |
| cb85a9e5 | 44 | status = "disabled"; |
| e04920d9 RS |
45 | }; |
| 46 | ||
| 6d1c3e93 | 47 | mlc: flash@200a8000 { |
| e04920d9 | 48 | compatible = "nxp,lpc3220-mlc"; |
| 6d1c3e93 RS |
49 | reg = <0x200a8000 0x11000>; |
| 50 | interrupts = <11 0>; | |
| cb85a9e5 | 51 | status = "disabled"; |
| e04920d9 RS |
52 | }; |
| 53 | ||
| 25de7c96 | 54 | dma: dma@31000000 { |
| e04920d9 RS |
55 | compatible = "arm,pl080", "arm,primecell"; |
| 56 | reg = <0x31000000 0x1000>; | |
| 57 | interrupts = <0x1c 0>; | |
| 58 | }; | |
| 59 | ||
| 60 | /* | |
| 61 | * Enable either ohci or usbd (gadget)! | |
| 62 | */ | |
| 25de7c96 | 63 | ohci: ohci@31020000 { |
| e04920d9 RS |
64 | compatible = "nxp,ohci-nxp", "usb-ohci"; |
| 65 | reg = <0x31020000 0x300>; | |
| 66 | interrupts = <0x3b 0>; | |
| cb85a9e5 | 67 | status = "disabled"; |
| e04920d9 RS |
68 | }; |
| 69 | ||
| 25de7c96 | 70 | usbd: usbd@31020000 { |
| e04920d9 RS |
71 | compatible = "nxp,lpc3220-udc"; |
| 72 | reg = <0x31020000 0x300>; | |
| 73 | interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>; | |
| cb85a9e5 | 74 | status = "disabled"; |
| e04920d9 RS |
75 | }; |
| 76 | ||
| 25de7c96 | 77 | clcd: clcd@31040000 { |
| e04920d9 RS |
78 | compatible = "arm,pl110", "arm,primecell"; |
| 79 | reg = <0x31040000 0x1000>; | |
| 80 | interrupts = <0x0e 0>; | |
| cb85a9e5 | 81 | status = "disabled"; |
| e04920d9 RS |
82 | }; |
| 83 | ||
| 84 | mac: ethernet@31060000 { | |
| 85 | compatible = "nxp,lpc-eth"; | |
| 86 | reg = <0x31060000 0x1000>; | |
| 87 | interrupts = <0x1d 0>; | |
| 88 | }; | |
| 89 | ||
| f83ee67f VZ |
90 | emc: memory-controller@31080000 { |
| 91 | compatible = "arm,pl175", "arm,primecell"; | |
| 92 | reg = <0x31080000 0x1000>; | |
| 93 | #address-cells = <1>; | |
| 94 | #size-cells = <1>; | |
| 95 | ||
| 96 | ranges = <0 0xe0000000 0x01000000>, | |
| 97 | <1 0xe1000000 0x01000000>, | |
| 98 | <2 0xe2000000 0x01000000>, | |
| 99 | <3 0xe3000000 0x01000000>; | |
| 100 | status = "disabled"; | |
| 101 | }; | |
| 102 | ||
| e04920d9 RS |
103 | apb { |
| 104 | #address-cells = <1>; | |
| 105 | #size-cells = <1>; | |
| 106 | compatible = "simple-bus"; | |
| 107 | ranges = <0x20000000 0x20000000 0x30000000>; | |
| 108 | ||
| 109 | ssp0: ssp@20084000 { | |
| 110 | compatible = "arm,pl022", "arm,primecell"; | |
| 111 | reg = <0x20084000 0x1000>; | |
| 112 | interrupts = <0x14 0>; | |
| 113 | }; | |
| 114 | ||
| 115 | spi1: spi@20088000 { | |
| 116 | compatible = "nxp,lpc3220-spi"; | |
| 117 | reg = <0x20088000 0x1000>; | |
| 118 | }; | |
| 119 | ||
| 120 | ssp1: ssp@2008c000 { | |
| 121 | compatible = "arm,pl022", "arm,primecell"; | |
| 122 | reg = <0x2008c000 0x1000>; | |
| 123 | interrupts = <0x15 0>; | |
| 124 | }; | |
| 125 | ||
| 126 | spi2: spi@20090000 { | |
| 127 | compatible = "nxp,lpc3220-spi"; | |
| 128 | reg = <0x20090000 0x1000>; | |
| 129 | }; | |
| 130 | ||
| 131 | i2s0: i2s@20094000 { | |
| 132 | compatible = "nxp,lpc3220-i2s"; | |
| 133 | reg = <0x20094000 0x1000>; | |
| 134 | }; | |
| 135 | ||
| 25de7c96 | 136 | sd: sd@20098000 { |
| 2c7fa286 | 137 | compatible = "arm,pl18x", "arm,primecell"; |
| e04920d9 RS |
138 | reg = <0x20098000 0x1000>; |
| 139 | interrupts = <0x0f 0>, <0x0d 0>; | |
| 2c7fa286 | 140 | status = "disabled"; |
| e04920d9 RS |
141 | }; |
| 142 | ||
| 143 | i2s1: i2s@2009C000 { | |
| 144 | compatible = "nxp,lpc3220-i2s"; | |
| 145 | reg = <0x2009C000 0x1000>; | |
| 146 | }; | |
| 147 | ||
| c70426f1 RS |
148 | /* UART5 first since it is the default console, ttyS0 */ |
| 149 | uart5: serial@40090000 { | |
| 150 | /* actually, ns16550a w/ 64 byte fifos! */ | |
| 151 | compatible = "nxp,lpc3220-uart"; | |
| 152 | reg = <0x40090000 0x1000>; | |
| 153 | interrupts = <9 0>; | |
| 154 | clock-frequency = <13000000>; | |
| 155 | reg-shift = <2>; | |
| 156 | status = "disabled"; | |
| 157 | }; | |
| 158 | ||
| e04920d9 | 159 | uart3: serial@40080000 { |
| c70426f1 | 160 | compatible = "nxp,lpc3220-uart"; |
| e04920d9 | 161 | reg = <0x40080000 0x1000>; |
| c70426f1 RS |
162 | interrupts = <7 0>; |
| 163 | clock-frequency = <13000000>; | |
| 164 | reg-shift = <2>; | |
| 165 | status = "disabled"; | |
| e04920d9 RS |
166 | }; |
| 167 | ||
| 168 | uart4: serial@40088000 { | |
| c70426f1 | 169 | compatible = "nxp,lpc3220-uart"; |
| e04920d9 | 170 | reg = <0x40088000 0x1000>; |
| c70426f1 RS |
171 | interrupts = <8 0>; |
| 172 | clock-frequency = <13000000>; | |
| 173 | reg-shift = <2>; | |
| 174 | status = "disabled"; | |
| e04920d9 RS |
175 | }; |
| 176 | ||
| 177 | uart6: serial@40098000 { | |
| c70426f1 | 178 | compatible = "nxp,lpc3220-uart"; |
| e04920d9 | 179 | reg = <0x40098000 0x1000>; |
| c70426f1 RS |
180 | interrupts = <10 0>; |
| 181 | clock-frequency = <13000000>; | |
| 182 | reg-shift = <2>; | |
| 183 | status = "disabled"; | |
| e04920d9 RS |
184 | }; |
| 185 | ||
| 186 | i2c1: i2c@400A0000 { | |
| 187 | compatible = "nxp,pnx-i2c"; | |
| 188 | reg = <0x400A0000 0x100>; | |
| 189 | interrupts = <0x33 0>; | |
| 190 | #address-cells = <1>; | |
| 191 | #size-cells = <0>; | |
| 192 | pnx,timeout = <0x64>; | |
| 193 | }; | |
| 194 | ||
| 195 | i2c2: i2c@400A8000 { | |
| 196 | compatible = "nxp,pnx-i2c"; | |
| 197 | reg = <0x400A8000 0x100>; | |
| 198 | interrupts = <0x32 0>; | |
| 199 | #address-cells = <1>; | |
| 200 | #size-cells = <0>; | |
| 201 | pnx,timeout = <0x64>; | |
| 202 | }; | |
| 203 | ||
| b7d41c93 AB |
204 | mpwm: mpwm@400E8000 { |
| 205 | compatible = "nxp,lpc3220-motor-pwm"; | |
| 206 | reg = <0x400E8000 0x78>; | |
| 207 | status = "disabled"; | |
| 208 | #pwm-cells = <2>; | |
| 209 | }; | |
| 210 | ||
| e04920d9 RS |
211 | i2cusb: i2c@31020300 { |
| 212 | compatible = "nxp,pnx-i2c"; | |
| 213 | reg = <0x31020300 0x100>; | |
| 214 | interrupts = <0x3f 0>; | |
| 215 | #address-cells = <1>; | |
| 216 | #size-cells = <0>; | |
| 217 | pnx,timeout = <0x64>; | |
| 218 | }; | |
| 219 | }; | |
| 220 | ||
| 221 | fab { | |
| 222 | #address-cells = <1>; | |
| 223 | #size-cells = <1>; | |
| 224 | compatible = "simple-bus"; | |
| 225 | ranges = <0x20000000 0x20000000 0x30000000>; | |
| 226 | ||
| 227 | /* | |
| 228 | * MIC Interrupt controller includes: | |
| 229 | * MIC @40008000 | |
| 230 | * SIC1 @4000C000 | |
| 231 | * SIC2 @40010000 | |
| 232 | */ | |
| 233 | mic: interrupt-controller@40008000 { | |
| 234 | compatible = "nxp,lpc3220-mic"; | |
| 235 | interrupt-controller; | |
| 236 | reg = <0x40008000 0xC000>; | |
| 237 | #interrupt-cells = <2>; | |
| 238 | }; | |
| 239 | ||
| 240 | uart1: serial@40014000 { | |
| ac5ced91 | 241 | compatible = "nxp,lpc3220-hsuart"; |
| e04920d9 | 242 | reg = <0x40014000 0x1000>; |
| ac5ced91 RS |
243 | interrupts = <26 0>; |
| 244 | status = "disabled"; | |
| e04920d9 RS |
245 | }; |
| 246 | ||
| 247 | uart2: serial@40018000 { | |
| ac5ced91 | 248 | compatible = "nxp,lpc3220-hsuart"; |
| e04920d9 | 249 | reg = <0x40018000 0x1000>; |
| ac5ced91 RS |
250 | interrupts = <25 0>; |
| 251 | status = "disabled"; | |
| e04920d9 RS |
252 | }; |
| 253 | ||
| ac5ced91 RS |
254 | uart7: serial@4001c000 { |
| 255 | compatible = "nxp,lpc3220-hsuart"; | |
| 256 | reg = <0x4001c000 0x1000>; | |
| 257 | interrupts = <24 0>; | |
| 258 | status = "disabled"; | |
| e04920d9 RS |
259 | }; |
| 260 | ||
| 25de7c96 | 261 | rtc: rtc@40024000 { |
| e04920d9 RS |
262 | compatible = "nxp,lpc3220-rtc"; |
| 263 | reg = <0x40024000 0x1000>; | |
| 264 | interrupts = <0x34 0>; | |
| 265 | }; | |
| 266 | ||
| 267 | gpio: gpio@40028000 { | |
| 268 | compatible = "nxp,lpc3220-gpio"; | |
| 269 | reg = <0x40028000 0x1000>; | |
| a035254a RS |
270 | gpio-controller; |
| 271 | #gpio-cells = <3>; /* bank, pin, flags */ | |
| e04920d9 RS |
272 | }; |
| 273 | ||
| c1aa7007 VZ |
274 | timer4: timer@4002C000 { |
| 275 | compatible = "nxp,lpc3220-timer"; | |
| 276 | reg = <0x4002C000 0x1000>; | |
| 277 | interrupts = <0x3 0>; | |
| 278 | status = "disabled"; | |
| 279 | }; | |
| 280 | ||
| 281 | timer5: timer@40030000 { | |
| 282 | compatible = "nxp,lpc3220-timer"; | |
| 283 | reg = <0x40030000 0x1000>; | |
| 284 | interrupts = <0x4 0>; | |
| 285 | status = "disabled"; | |
| 286 | }; | |
| 287 | ||
| 25de7c96 | 288 | watchdog: watchdog@4003C000 { |
| e04920d9 RS |
289 | compatible = "nxp,pnx4008-wdt"; |
| 290 | reg = <0x4003C000 0x1000>; | |
| 291 | }; | |
| 292 | ||
| c1aa7007 VZ |
293 | timer0: timer@40044000 { |
| 294 | compatible = "nxp,lpc3220-timer"; | |
| 295 | reg = <0x40044000 0x1000>; | |
| 296 | interrupts = <0x10 0>; | |
| 297 | }; | |
| 298 | ||
| e04920d9 RS |
299 | /* |
| 300 | * TSC vs. ADC: Since those two share the same | |
| 301 | * hardware, you need to choose from one of the | |
| 302 | * following two and do 'status = "okay";' for one of | |
| 303 | * them | |
| 304 | */ | |
| 305 | ||
| 25de7c96 | 306 | adc: adc@40048000 { |
| e04920d9 RS |
307 | compatible = "nxp,lpc3220-adc"; |
| 308 | reg = <0x40048000 0x1000>; | |
| 309 | interrupts = <0x27 0>; | |
| cb85a9e5 | 310 | status = "disabled"; |
| e04920d9 RS |
311 | }; |
| 312 | ||
| 25de7c96 | 313 | tsc: tsc@40048000 { |
| e04920d9 RS |
314 | compatible = "nxp,lpc3220-tsc"; |
| 315 | reg = <0x40048000 0x1000>; | |
| 316 | interrupts = <0x27 0>; | |
| cb85a9e5 | 317 | status = "disabled"; |
| e04920d9 RS |
318 | }; |
| 319 | ||
| c1aa7007 VZ |
320 | timer1: timer@4004C000 { |
| 321 | compatible = "nxp,lpc3220-timer"; | |
| 322 | reg = <0x4004C000 0x1000>; | |
| 323 | interrupts = <0x11 0>; | |
| 324 | }; | |
| 325 | ||
| 25de7c96 | 326 | key: key@40050000 { |
| e04920d9 RS |
327 | compatible = "nxp,lpc3220-key"; |
| 328 | reg = <0x40050000 0x1000>; | |
| a6d1be0e RS |
329 | interrupts = <54 0>; |
| 330 | status = "disabled"; | |
| e04920d9 RS |
331 | }; |
| 332 | ||
| c1aa7007 VZ |
333 | timer2: timer@40058000 { |
| 334 | compatible = "nxp,lpc3220-timer"; | |
| 335 | reg = <0x40058000 0x1000>; | |
| 336 | interrupts = <0x12 0>; | |
| 337 | status = "disabled"; | |
| 338 | }; | |
| 339 | ||
| 2a6c6563 | 340 | pwm1: pwm@4005C000 { |
| de639854 | 341 | compatible = "nxp,lpc3220-pwm"; |
| 2a6c6563 VZ |
342 | reg = <0x4005C000 0x4>; |
| 343 | status = "disabled"; | |
| 344 | }; | |
| 345 | ||
| 346 | pwm2: pwm@4005C004 { | |
| 347 | compatible = "nxp,lpc3220-pwm"; | |
| 348 | reg = <0x4005C004 0x4>; | |
| de639854 APS |
349 | status = "disabled"; |
| 350 | }; | |
| c1aa7007 VZ |
351 | |
| 352 | timer3: timer@40060000 { | |
| 353 | compatible = "nxp,lpc3220-timer"; | |
| 354 | reg = <0x40060000 0x1000>; | |
| 355 | interrupts = <0x13 0>; | |
| 356 | status = "disabled"; | |
| 357 | }; | |
| e04920d9 RS |
358 | }; |
| 359 | }; | |
| 360 | }; |