projects / deliverable / linux.git / blame
| Commit | Line | Data |
|---|---|---|
| 40ecc02e DL |
1 | /* |
| 2 | * Support for CompuLab CM-T3530 | |
| 3 | */ | |
| 4 | /dts-v1/; | |
| 5 | ||
| 6 | #include "omap34xx.dtsi" | |
| 7 | #include "omap3-cm-t3x30.dtsi" | |
| 8 | ||
| 9 | / { | |
| 10 | model = "CompuLab CM-T3530"; | |
| 11 | compatible = "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3"; | |
| e1902bbe SR |
12 | |
| 13 | /* Regulator to trigger the reset signal of the Wifi module */ | |
| 14 | mmc2_sdio_reset: regulator-mmc2-sdio-reset { | |
| 15 | compatible = "regulator-fixed"; | |
| 16 | regulator-name = "regulator-mmc2-sdio-reset"; | |
| 17 | regulator-min-microvolt = <3300000>; | |
| 18 | regulator-max-microvolt = <3300000>; | |
| 19 | gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>; | |
| 20 | enable-active-high; | |
| 21 | }; | |
| 22 | }; | |
| 23 | ||
| 24 | &omap3_pmx_core { | |
| 25 | mmc2_pins: pinmux_mmc2_pins { | |
| 26 | pinctrl-single,pins = < | |
| 27 | OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ | |
| 28 | OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ | |
| 29 | OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ | |
| 30 | OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ | |
| 31 | OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ | |
| 32 | OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ | |
| 33 | OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat4.sdmmc2_dir_dat0 */ | |
| 34 | OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat5.sdmmc2_dir_dat1 */ | |
| 35 | OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat6.sdmmc2_dir_cmd */ | |
| 36 | OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* sdmmc2_dat7.sdmmc2_clkin */ | |
| 37 | >; | |
| 38 | }; | |
| 39 | }; | |
| 40 | ||
| 41 | &mmc2 { | |
| 42 | pinctrl-names = "default"; | |
| 43 | pinctrl-0 = <&mmc2_pins>; | |
| 44 | vmmc-supply = <&mmc2_sdio_reset>; | |
| 45 | non-removable; | |
| 46 | bus-width = <4>; | |
| 47 | cap-power-off-card; | |
| 40ecc02e | 48 | }; |
| e5ee042b DL |
49 | |
| 50 | &dss { | |
| 51 | status = "ok"; | |
| 52 | ||
| 53 | pinctrl-names = "default"; | |
| 54 | pinctrl-0 = < | |
| 55 | &dss_dpi_pins_common | |
| 56 | &dss_dpi_pins_cm_t35x | |
| 57 | >; | |
| 58 | }; | |
| 59 |