projects / deliverable / linux.git / blame
| Commit | Line | Data |
|---|---|---|
| 8647f2bc EBS |
1 | /* |
| 2 | * Common Device Tree Source for IGEP COM MODULE | |
| 3 | * | |
| 4 | * Copyright (C) 2014 Javier Martinez Canillas <javier@collabora.co.uk> | |
| 5 | * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com> | |
| 6 | * | |
| 7 | * This program is free software; you can redistribute it and/or modify | |
| 8 | * it under the terms of the GNU General Public License version 2 as | |
| 9 | * published by the Free Software Foundation. | |
| 10 | */ | |
| 11 | ||
| 12 | #include "omap3-igep.dtsi" | |
| 13 | ||
| 14 | / { | |
| 15 | leds: gpio_leds { | |
| 16 | compatible = "gpio-leds"; | |
| 17 | ||
| 18 | user0 { | |
| 19 | label = "omap3:red:user0"; | |
| 20 | gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* LEDA */ | |
| 21 | default-state = "off"; | |
| 22 | }; | |
| 23 | ||
| 24 | user1 { | |
| 25 | label = "omap3:green:user1"; | |
| 26 | gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>; /* LEDB */ | |
| 27 | default-state = "off"; | |
| 28 | }; | |
| 29 | ||
| 30 | user2 { | |
| 31 | label = "omap3:red:user1"; | |
| 32 | gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; /* gpio_16 */ | |
| 33 | default-state = "off"; | |
| 34 | }; | |
| 35 | }; | |
| 36 | }; | |
| 37 | ||
| 38 | &omap3_pmx_core { | |
| 39 | uart2_pins: pinmux_uart2_pins { | |
| 40 | pinctrl-single,pins = < | |
| 41 | OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1) /* mcbsp3_dx.uart2_cts */ | |
| 42 | OMAP3_CORE1_IOPAD(0x216e, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_dr.uart2_rts */ | |
| 43 | OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_clk.uart2_tx */ | |
| 44 | OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1) /* mcbsp3_fsx.uart2_rx */ | |
| 45 | >; | |
| 46 | }; | |
| 47 | }; | |
| 48 | ||
| 49 | &omap3_pmx_core2 { | |
| 50 | leds_core2_pins: pinmux_leds_core2_pins { | |
| 51 | pinctrl-single,pins = < | |
| 52 | OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */ | |
| 53 | >; | |
| 54 | }; | |
| 55 | }; | |
| 56 | ||
| 57 | &uart2 { | |
| 58 | pinctrl-names = "default"; | |
| 59 | pinctrl-0 = <&uart2_pins>; | |
| 60 | }; |