projects / deliverable / linux.git / blame
| Commit | Line | Data |
|---|---|---|
| 8647f2bc EBS |
1 | /* |
| 2 | * Common Device Tree Source for IGEP COM MODULE | |
| 3 | * | |
| 56a31e54 | 4 | * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com> |
| 8647f2bc EBS |
5 | * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com> |
| 6 | * | |
| 7 | * This program is free software; you can redistribute it and/or modify | |
| 8 | * it under the terms of the GNU General Public License version 2 as | |
| 9 | * published by the Free Software Foundation. | |
| 10 | */ | |
| 11 | ||
| 12 | #include "omap3-igep.dtsi" | |
| 13 | ||
| 14 | / { | |
| 15 | leds: gpio_leds { | |
| 16 | compatible = "gpio-leds"; | |
| 17 | ||
| 18 | user0 { | |
| 19 | label = "omap3:red:user0"; | |
| 20 | gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* LEDA */ | |
| 21 | default-state = "off"; | |
| 22 | }; | |
| 23 | ||
| 24 | user1 { | |
| 25 | label = "omap3:green:user1"; | |
| 26 | gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>; /* LEDB */ | |
| 27 | default-state = "off"; | |
| 28 | }; | |
| 29 | ||
| 30 | user2 { | |
| 31 | label = "omap3:red:user1"; | |
| 32 | gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; /* gpio_16 */ | |
| 33 | default-state = "off"; | |
| 34 | }; | |
| 35 | }; | |
| 7911fc43 PP |
36 | |
| 37 | hsusb2_phy: hsusb2_phy { | |
| 38 | compatible = "usb-nop-xceiv"; | |
| 39 | reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* gpio_54 */ | |
| 40 | }; | |
| 8647f2bc EBS |
41 | }; |
| 42 | ||
| 43 | &omap3_pmx_core { | |
| 7911fc43 PP |
44 | pinctrl-names = "default"; |
| 45 | pinctrl-0 = <&hsusb2_pins>; | |
| 46 | ||
| 47 | hsusb2_pins: pinmux_hsusb2_pins { | |
| 48 | pinctrl-single,pins = < | |
| 49 | OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ | |
| 50 | OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ | |
| 51 | OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */ | |
| 52 | OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */ | |
| 53 | OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */ | |
| 54 | OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */ | |
| 55 | >; | |
| 56 | }; | |
| 57 | ||
| 8647f2bc EBS |
58 | uart2_pins: pinmux_uart2_pins { |
| 59 | pinctrl-single,pins = < | |
| 60 | OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1) /* mcbsp3_dx.uart2_cts */ | |
| 61 | OMAP3_CORE1_IOPAD(0x216e, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_dr.uart2_rts */ | |
| 62 | OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_clk.uart2_tx */ | |
| 63 | OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1) /* mcbsp3_fsx.uart2_rx */ | |
| 64 | >; | |
| 65 | }; | |
| 66 | }; | |
| 67 | ||
| 68 | &omap3_pmx_core2 { | |
| 7911fc43 PP |
69 | pinctrl-names = "default"; |
| 70 | pinctrl-0 = <&hsusb2_core2_pins>; | |
| 71 | ||
| 72 | hsusb2_core2_pins: pinmux_hsusb2_core2_pins { | |
| 73 | pinctrl-single,pins = < | |
| 74 | OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ | |
| 75 | OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ | |
| 76 | OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ | |
| 77 | OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ | |
| 78 | OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ | |
| 79 | OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ | |
| 80 | >; | |
| 81 | }; | |
| 82 | ||
| 8647f2bc EBS |
83 | leds_core2_pins: pinmux_leds_core2_pins { |
| 84 | pinctrl-single,pins = < | |
| 85 | OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */ | |
| 86 | >; | |
| 87 | }; | |
| 88 | }; | |
| 89 | ||
| 7911fc43 PP |
90 | &usbhshost { |
| 91 | port2-mode = "ehci-phy"; | |
| 92 | }; | |
| 93 | ||
| 94 | &usbhsehci { | |
| 95 | phys = <0 &hsusb2_phy>; | |
| 96 | }; | |
| 97 | ||
| 8647f2bc EBS |
98 | &uart2 { |
| 99 | pinctrl-names = "default"; | |
| 100 | pinctrl-0 = <&uart2_pins>; | |
| 101 | }; | |
| 44e47164 RQ |
102 | |
| 103 | &gpmc { | |
| 104 | ranges = <0 0 0x30000000 0x01000000>; /* CS0: 16MB for NAND */ | |
| 105 | }; |