Commit | Line | Data |
---|---|---|
f335b8af | 1 | #include "qcom-apq8064-v2.0.dtsi" |
b4e10dd7 | 2 | #include <dt-bindings/gpio/gpio.h> |
03f00be5 | 3 | #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> |
f335b8af KG |
4 | |
5 | / { | |
6 | model = "Qualcomm APQ8064/IFC6410"; | |
7 | compatible = "qcom,apq8064-ifc6410", "qcom,apq8064"; | |
8 | ||
d5d4654e PG |
9 | aliases { |
10 | serial0 = &gsbi7_serial; | |
86e252a4 | 11 | serial1 = &gsbi6_serial; |
90bd6e8f SK |
12 | i2c0 = &gsbi1_i2c; |
13 | i2c1 = &gsbi2_i2c; | |
14 | i2c2 = &gsbi3_i2c; | |
15 | i2c3 = &gsbi4_i2c; | |
16 | spi0 = &gsbi5_spi; | |
d5d4654e PG |
17 | }; |
18 | ||
7f9e28b6 SB |
19 | chosen { |
20 | stdout-path = "serial0:115200n8"; | |
21 | }; | |
22 | ||
03f00be5 SK |
23 | pwrseq { |
24 | compatible = "simple-bus"; | |
25 | ||
26 | sdcc4_pwrseq: sdcc4_pwrseq { | |
27 | pinctrl-names = "default"; | |
28 | pinctrl-0 = <&wlan_default_gpios>; | |
29 | compatible = "mmc-pwrseq-simple"; | |
30 | reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>; | |
31 | }; | |
32 | }; | |
33 | ||
2630a52f SK |
34 | leds { |
35 | compatible = "gpio-leds"; | |
36 | pinctrl-names = "default"; | |
37 | pinctrl-0 = <¬ify_led>; | |
38 | ||
39 | led@1 { | |
40 | label = "apq8064:green:user1"; | |
41 | gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>; | |
42 | default-state = "on"; | |
43 | }; | |
44 | }; | |
45 | ||
f335b8af | 46 | soc { |
8c3166f5 | 47 | pinctrl@800000 { |
b4e10dd7 PG |
48 | card_detect: card_detect { |
49 | mux { | |
50 | pins = "gpio26"; | |
51 | function = "gpio"; | |
52 | bias-disable; | |
53 | }; | |
54 | }; | |
668f4729 SV |
55 | |
56 | pcie_pins: pcie_pinmux { | |
57 | mux { | |
58 | pins = "gpio27"; | |
59 | function = "gpio"; | |
60 | }; | |
61 | conf { | |
62 | pins = "gpio27"; | |
63 | drive-strength = <12>; | |
64 | bias-disable; | |
65 | }; | |
66 | }; | |
8c3166f5 | 67 | }; |
68 | ||
ad560450 SK |
69 | rpm@108000 { |
70 | regulators { | |
71 | vin_lvs1_3_6-supply = <&pm8921_s4>; | |
72 | vin_lvs2-supply = <&pm8921_s1>; | |
73 | vin_lvs4_5_7-supply = <&pm8921_s4>; | |
74 | ||
75 | vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; | |
76 | vdd_l24-supply = <&pm8921_s1>; | |
77 | vdd_l25-supply = <&pm8921_s1>; | |
78 | vdd_l26-supply = <&pm8921_s7>; | |
79 | vdd_l27-supply = <&pm8921_s7>; | |
80 | vdd_l28-supply = <&pm8921_s7>; | |
81 | ||
82 | ||
83 | /* Buck SMPS */ | |
2bce6e26 | 84 | s1 { |
ad560450 SK |
85 | regulator-always-on; |
86 | regulator-min-microvolt = <1225000>; | |
87 | regulator-max-microvolt = <1225000>; | |
88 | qcom,switch-mode-frequency = <3200000>; | |
89 | bias-pull-down; | |
90 | }; | |
91 | ||
2bce6e26 | 92 | s3 { |
ad560450 SK |
93 | regulator-min-microvolt = <1000000>; |
94 | regulator-max-microvolt = <1400000>; | |
95 | qcom,switch-mode-frequency = <4800000>; | |
96 | }; | |
97 | ||
2bce6e26 | 98 | s4 { |
ad560450 SK |
99 | regulator-min-microvolt = <1800000>; |
100 | regulator-max-microvolt = <1800000>; | |
101 | qcom,switch-mode-frequency = <3200000>; | |
102 | }; | |
103 | ||
2bce6e26 | 104 | s7 { |
ad560450 SK |
105 | regulator-min-microvolt = <1300000>; |
106 | regulator-max-microvolt = <1300000>; | |
107 | qcom,switch-mode-frequency = <3200000>; | |
108 | }; | |
109 | ||
2bce6e26 | 110 | l3 { |
ad560450 SK |
111 | regulator-min-microvolt = <3050000>; |
112 | regulator-max-microvolt = <3300000>; | |
113 | bias-pull-down; | |
114 | }; | |
115 | ||
2bce6e26 | 116 | l4 { |
ad560450 SK |
117 | regulator-min-microvolt = <1000000>; |
118 | regulator-max-microvolt = <1800000>; | |
119 | bias-pull-down; | |
120 | }; | |
121 | ||
2bce6e26 | 122 | l5 { |
2736bbac SK |
123 | regulator-min-microvolt = <2750000>; |
124 | regulator-max-microvolt = <3000000>; | |
125 | bias-pull-down; | |
126 | }; | |
127 | ||
2bce6e26 | 128 | l6 { |
ad560450 SK |
129 | regulator-min-microvolt = <2950000>; |
130 | regulator-max-microvolt = <2950000>; | |
131 | bias-pull-down; | |
132 | }; | |
133 | ||
2bce6e26 | 134 | l23 { |
ad560450 SK |
135 | regulator-min-microvolt = <1700000>; |
136 | regulator-max-microvolt = <1900000>; | |
137 | bias-pull-down; | |
138 | }; | |
2736bbac | 139 | |
2bce6e26 | 140 | lvs1 { |
2736bbac SK |
141 | bias-pull-down; |
142 | }; | |
668f4729 SV |
143 | |
144 | lvs6 { | |
145 | bias-pull-down; | |
146 | }; | |
ad560450 SK |
147 | }; |
148 | }; | |
149 | ||
2736bbac SK |
150 | ext_3p3v: regulator-fixed@1 { |
151 | compatible = "regulator-fixed"; | |
152 | regulator-min-microvolt = <3300000>; | |
153 | regulator-max-microvolt = <3300000>; | |
154 | regulator-name = "ext_3p3v"; | |
155 | regulator-type = "voltage"; | |
156 | startup-delay-us = <0>; | |
157 | gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>; | |
158 | enable-active-high; | |
159 | regulator-boot-on; | |
160 | }; | |
161 | ||
3f62b46b SK |
162 | gsbi3: gsbi@16200000 { |
163 | status = "okay"; | |
164 | qcom,mode = <GSBI_PROT_I2C>; | |
e07214db | 165 | i2c@16280000 { |
3f62b46b | 166 | status = "okay"; |
3f62b46b SK |
167 | }; |
168 | }; | |
169 | ||
10e0c161 SK |
170 | gsbi@16300000 { |
171 | status = "okay"; | |
172 | qcom,mode = <GSBI_PROT_I2C>; | |
173 | /* CAM I2C MIPI-CSI connector */ | |
174 | i2c@16380000 { | |
175 | status = "okay"; | |
176 | }; | |
177 | }; | |
178 | ||
8c3166f5 | 179 | gsbi@12440000 { |
180 | status = "okay"; | |
181 | qcom,mode = <GSBI_PROT_I2C>; | |
182 | ||
183 | i2c@12460000 { | |
184 | status = "okay"; | |
185 | clock-frequency = <200000>; | |
8c3166f5 | 186 | |
e28ce3cc | 187 | eeprom@52 { |
8c3166f5 | 188 | compatible = "atmel,24c128"; |
189 | reg = <0x52>; | |
190 | pagesize = <32>; | |
191 | }; | |
192 | }; | |
193 | }; | |
194 | ||
492731cb SK |
195 | gsbi@1a200000 { |
196 | qcom,mode = <GSBI_PROT_SPI>; | |
197 | status = "okay"; | |
198 | spi4: spi@1a280000 { | |
199 | status = "okay"; | |
200 | num-cs = <1>; | |
201 | cs-gpios = <&tlmm_pinmux 53 0>; | |
202 | }; | |
203 | }; | |
204 | ||
86e252a4 PG |
205 | gsbi@16500000 { |
206 | status = "ok"; | |
426ac151 | 207 | qcom,mode = <GSBI_PROT_UART_W_FC>; |
86e252a4 PG |
208 | |
209 | serial@16540000 { | |
210 | status = "ok"; | |
86e252a4 | 211 | pinctrl-names = "default"; |
7648c7bf | 212 | pinctrl-0 = <&gsbi6_uart_4pins>; |
86e252a4 PG |
213 | }; |
214 | }; | |
215 | ||
f335b8af KG |
216 | gsbi@16600000 { |
217 | status = "ok"; | |
218 | qcom,mode = <GSBI_PROT_I2C_UART>; | |
219 | serial@16640000 { | |
220 | status = "ok"; | |
17dbc554 SK |
221 | pinctrl-names = "default"; |
222 | pinctrl-0 = <&gsbi7_uart_2pins>; | |
f335b8af KG |
223 | }; |
224 | }; | |
045644ff | 225 | |
e629335f SK |
226 | sata_phy0: phy@1b400000 { |
227 | status = "okay"; | |
228 | }; | |
229 | ||
230 | sata0: sata@29000000 { | |
231 | status = "okay"; | |
232 | target-supply = <&pm8921_s4>; | |
233 | }; | |
234 | ||
ea986611 SK |
235 | /* OTG */ |
236 | usb1_phy: phy@12500000 { | |
237 | status = "okay"; | |
238 | vddcx-supply = <&pm8921_s3>; | |
239 | v3p3-supply = <&pm8921_l3>; | |
240 | v1p8-supply = <&pm8921_l4>; | |
241 | }; | |
242 | ||
223280b1 SK |
243 | usb3_phy: phy@12520000 { |
244 | status = "okay"; | |
245 | vddcx-supply = <&pm8921_s3>; | |
246 | v3p3-supply = <&pm8921_l3>; | |
247 | v1p8-supply = <&pm8921_l23>; | |
248 | }; | |
249 | ||
250 | usb4_phy: phy@12530000 { | |
251 | status = "okay"; | |
252 | vddcx-supply = <&pm8921_s3>; | |
253 | v3p3-supply = <&pm8921_l3>; | |
254 | v1p8-supply = <&pm8921_l23>; | |
255 | }; | |
256 | ||
ea986611 SK |
257 | gadget1: gadget@12500000 { |
258 | status = "okay"; | |
259 | }; | |
260 | ||
261 | /* OTG */ | |
262 | usb1: usb@12500000 { | |
263 | status = "okay"; | |
264 | }; | |
265 | ||
223280b1 SK |
266 | usb3: usb@12520000 { |
267 | status = "okay"; | |
268 | }; | |
269 | ||
270 | usb4: usb@12530000 { | |
271 | status = "okay"; | |
272 | }; | |
273 | ||
668f4729 SV |
274 | pci@1b500000 { |
275 | status = "ok"; | |
276 | vdda-supply = <&pm8921_s3>; | |
277 | vdda_phy-supply = <&pm8921_lvs6>; | |
278 | vdda_refclk-supply = <&ext_3p3v>; | |
279 | pinctrl-0 = <&pcie_pins>; | |
280 | pinctrl-names = "default"; | |
281 | perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; | |
282 | }; | |
283 | ||
03f00be5 SK |
284 | qcom,ssbi@500000 { |
285 | pmic@0 { | |
286 | gpio@150 { | |
287 | wlan_default_gpios: wlan-gpios { | |
288 | pios { | |
289 | pins = "gpio43"; | |
290 | function = "normal"; | |
291 | bias-disable; | |
292 | power-source = <PM8921_GPIO_S4>; | |
293 | }; | |
294 | }; | |
2630a52f SK |
295 | |
296 | notify_led: nled { | |
297 | pios { | |
298 | pins = "gpio18"; | |
299 | function = "normal"; | |
300 | bias-disable; | |
301 | power-source = <PM8921_GPIO_S4>; | |
302 | }; | |
303 | }; | |
03f00be5 SK |
304 | }; |
305 | }; | |
306 | }; | |
307 | ||
045644ff SK |
308 | amba { |
309 | /* eMMC */ | |
310 | sdcc1: sdcc@12400000 { | |
311 | status = "okay"; | |
2736bbac SK |
312 | vmmc-supply = <&pm8921_l5>; |
313 | vqmmc-supply = <&pm8921_s4>; | |
045644ff SK |
314 | }; |
315 | ||
316 | /* External micro SD card */ | |
317 | sdcc3: sdcc@12180000 { | |
318 | status = "okay"; | |
2736bbac | 319 | vmmc-supply = <&pm8921_l6>; |
b4e10dd7 PG |
320 | pinctrl-names = "default"; |
321 | pinctrl-0 = <&card_detect>; | |
322 | cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; | |
045644ff | 323 | }; |
0be5fef1 SK |
324 | /* WLAN */ |
325 | sdcc4: sdcc@121c0000 { | |
326 | status = "okay"; | |
2736bbac SK |
327 | vmmc-supply = <&ext_3p3v>; |
328 | vqmmc-supply = <&pm8921_lvs1>; | |
03f00be5 | 329 | mmc-pwrseq = <&sdcc4_pwrseq>; |
0be5fef1 | 330 | }; |
045644ff | 331 | }; |
f335b8af KG |
332 | }; |
333 | }; |