[deliverable/linux.git] / arch / arm / boot / dts / qcom-apq8064-ifc6410.dts

#include "qcom-apq8064-v2.0.dtsi"
#include <dt-bindings/gpio/gpio.h>

/ {
	model = "Qualcomm APQ8064/IFC6410";
	compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";

	soc {
		pinctrl@800000 {
			i2c1_pins: i2c1 {
				mux {
					pins = "gpio20", "gpio21";
					function = "gsbi1";
				};
			};

			card_detect: card_detect {
				mux {
					pins = "gpio26";
					function = "gpio";
					bias-disable;
				};
			};
		};

		rpm@108000 {
			regulators {
				vin_lvs1_3_6-supply = <&pm8921_s4>;
				vin_lvs2-supply = <&pm8921_s1>;
				vin_lvs4_5_7-supply = <&pm8921_s4>;

				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
				vdd_l24-supply = <&pm8921_s1>;
				vdd_l25-supply = <&pm8921_s1>;
				vdd_l26-supply = <&pm8921_s7>;
				vdd_l27-supply = <&pm8921_s7>;
				vdd_l28-supply = <&pm8921_s7>;


				/* Buck SMPS */
				pm8921_s1: s1 {
					regulator-always-on;
					regulator-min-microvolt = <1225000>;
					regulator-max-microvolt = <1225000>;
					qcom,switch-mode-frequency = <3200000>;
					bias-pull-down;
				};

				pm8921_s3: s3 {
					regulator-min-microvolt = <1000000>;
					regulator-max-microvolt = <1400000>;
					qcom,switch-mode-frequency = <4800000>;
				};

				pm8921_s4: s4 {
					regulator-min-microvolt	= <1800000>;
					regulator-max-microvolt	= <1800000>;
					qcom,switch-mode-frequency = <3200000>;
				};

				pm8921_s7: s7 {
					regulator-min-microvolt = <1300000>;
					regulator-max-microvolt = <1300000>;
					qcom,switch-mode-frequency = <3200000>;
				};

				pm8921_l3: l3 {
					regulator-min-microvolt = <3050000>;
					regulator-max-microvolt = <3300000>;
					bias-pull-down;
				};

				pm8921_l4: l4 {
					regulator-min-microvolt = <1000000>;
					regulator-max-microvolt = <1800000>;
					bias-pull-down;
				};

				pm8921_l6: l6 {
					regulator-min-microvolt = <2950000>;
					regulator-max-microvolt = <2950000>;
					bias-pull-down;
				};

				pm8921_l23: l23 {
					regulator-min-microvolt = <1700000>;
					regulator-max-microvolt = <1900000>;
					bias-pull-down;
				};
			};
		};

		gsbi@12440000 {
			status = "okay";
			qcom,mode = <GSBI_PROT_I2C>;

			i2c@12460000 {
				status = "okay";
				clock-frequency = <200000>;
				pinctrl-0 = <&i2c1_pins>;
				pinctrl-names = "default";

				eeprom: eeprom@52 {
					compatible = "atmel,24c128";
					reg = <0x52>;
					pagesize = <32>;
				};
			};
		};

		gsbi@16600000 {
			status = "ok";
			qcom,mode = <GSBI_PROT_I2C_UART>;
			serial@16640000 {
				status = "ok";
			};
		};

		/* OTG */
		usb1_phy: phy@12500000 {
			status		= "okay";
			vddcx-supply	= <&pm8921_s3>;
			v3p3-supply	= <&pm8921_l3>;
			v1p8-supply	= <&pm8921_l4>;
		};

		usb3_phy: phy@12520000 {
			status		= "okay";
			vddcx-supply	= <&pm8921_s3>;
			v3p3-supply	= <&pm8921_l3>;
			v1p8-supply	= <&pm8921_l23>;
		};

		usb4_phy: phy@12530000 {
			status		= "okay";
			vddcx-supply	= <&pm8921_s3>;
			v3p3-supply	= <&pm8921_l3>;
			v1p8-supply	= <&pm8921_l23>;
		};

		gadget1: gadget@12500000 {
			status = "okay";
		};

		/* OTG */
		usb1: usb@12500000 {
			status = "okay";
		};

		usb3: usb@12520000 {
			status = "okay";
		};

		usb4: usb@12530000 {
			status = "okay";
		};

		amba {
			/* eMMC */
			sdcc1: sdcc@12400000 {
				status = "okay";
			};

			/* External micro SD card */
			sdcc3: sdcc@12180000 {
				status = "okay";
				pinctrl-names	= "default";
				pinctrl-0	= <&card_detect>;
				cd-gpios	= <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
			};
			/* WLAN */
			sdcc4: sdcc@121c0000 {
				status = "okay";
			};
		};
	};
};
Commit	Line	Data
f335b8af	1	#include "qcom-apq8064-v2.0.dtsi"
b4e10dd7	2	#include <dt-bindings/gpio/gpio.h>
f335b8af KG	3
	4	/ {
	5	model = "Qualcomm APQ8064/IFC6410";
	6	compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
	7
	8	soc {
8c3166f5	9	pinctrl@800000 {
	10	i2c1_pins: i2c1 {
	11	mux {
	12	pins = "gpio20", "gpio21";
	13	function = "gsbi1";
	14	};
	15	};
b4e10dd7 PG	16
	17	card_detect: card_detect {
	18	mux {
	19	pins = "gpio26";
	20	function = "gpio";
	21	bias-disable;
	22	};
	23	};
8c3166f5	24	};
8c3166f5	25
ad560450 SK	26	rpm@108000 {
	27	regulators {
	28	vin_lvs1_3_6-supply = <&pm8921_s4>;
	29	vin_lvs2-supply = <&pm8921_s1>;
	30	vin_lvs4_5_7-supply = <&pm8921_s4>;
	31
	32	vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
	33	vdd_l24-supply = <&pm8921_s1>;
	34	vdd_l25-supply = <&pm8921_s1>;
	35	vdd_l26-supply = <&pm8921_s7>;
	36	vdd_l27-supply = <&pm8921_s7>;
	37	vdd_l28-supply = <&pm8921_s7>;
	38
	39
	40	/* Buck SMPS */
	41	pm8921_s1: s1 {
	42	regulator-always-on;
	43	regulator-min-microvolt = <1225000>;
	44	regulator-max-microvolt = <1225000>;
	45	qcom,switch-mode-frequency = <3200000>;
	46	bias-pull-down;
	47	};
	48
	49	pm8921_s3: s3 {
	50	regulator-min-microvolt = <1000000>;
	51	regulator-max-microvolt = <1400000>;
	52	qcom,switch-mode-frequency = <4800000>;
	53	};
	54
	55	pm8921_s4: s4 {
	56	regulator-min-microvolt = <1800000>;
	57	regulator-max-microvolt = <1800000>;
	58	qcom,switch-mode-frequency = <3200000>;
	59	};
	60
	61	pm8921_s7: s7 {
	62	regulator-min-microvolt = <1300000>;
	63	regulator-max-microvolt = <1300000>;
	64	qcom,switch-mode-frequency = <3200000>;
	65	};
	66
	67	pm8921_l3: l3 {
	68	regulator-min-microvolt = <3050000>;
	69	regulator-max-microvolt = <3300000>;
	70	bias-pull-down;
	71	};
	72
	73	pm8921_l4: l4 {
	74	regulator-min-microvolt = <1000000>;
	75	regulator-max-microvolt = <1800000>;
	76	bias-pull-down;
	77	};
	78
	79	pm8921_l6: l6 {
	80	regulator-min-microvolt = <2950000>;
	81	regulator-max-microvolt = <2950000>;
	82	bias-pull-down;
	83	};
	84
	85	pm8921_l23: l23 {
	86	regulator-min-microvolt = <1700000>;
	87	regulator-max-microvolt = <1900000>;
	88	bias-pull-down;
	89	};
90	};
91	};
92
8c3166f5	93	gsbi@12440000 {
	94	status = "okay";
	95	qcom,mode = <GSBI_PROT_I2C>;
	96
	97	i2c@12460000 {
	98	status = "okay";
	99	clock-frequency = <200000>;
	100	pinctrl-0 = <&i2c1_pins>;
	101	pinctrl-names = "default";
	102
	103	eeprom: eeprom@52 {
	104	compatible = "atmel,24c128";
	105	reg = <0x52>;
	106	pagesize = <32>;
	107	};
	108	};
	109	};
	110
f335b8af KG	111	gsbi@16600000 {
	112	status = "ok";
	113	qcom,mode = <GSBI_PROT_I2C_UART>;
	114	serial@16640000 {
	115	status = "ok";
	116	};
	117	};
045644ff	118
ea986611 SK	119	/* OTG */
	120	usb1_phy: phy@12500000 {
	121	status = "okay";
	122	vddcx-supply = <&pm8921_s3>;
	123	v3p3-supply = <&pm8921_l3>;
	124	v1p8-supply = <&pm8921_l4>;
	125	};
	126
223280b1 SK	127	usb3_phy: phy@12520000 {
	128	status = "okay";
	129	vddcx-supply = <&pm8921_s3>;
	130	v3p3-supply = <&pm8921_l3>;
	131	v1p8-supply = <&pm8921_l23>;
	132	};
	133
	134	usb4_phy: phy@12530000 {
	135	status = "okay";
	136	vddcx-supply = <&pm8921_s3>;
	137	v3p3-supply = <&pm8921_l3>;
	138	v1p8-supply = <&pm8921_l23>;
	139	};
	140
ea986611 SK	141	gadget1: gadget@12500000 {
	142	status = "okay";
	143	};
	144
	145	/* OTG */
	146	usb1: usb@12500000 {
	147	status = "okay";
	148	};
	149
223280b1 SK	150	usb3: usb@12520000 {
	151	status = "okay";
	152	};
	153
	154	usb4: usb@12530000 {
	155	status = "okay";
	156	};
	157
045644ff SK	158	amba {
	159	/* eMMC */
	160	sdcc1: sdcc@12400000 {
	161	status = "okay";
	162	};
	163
	164	/* External micro SD card */
	165	sdcc3: sdcc@12180000 {
	166	status = "okay";
b4e10dd7 PG	167	pinctrl-names = "default";
	168	pinctrl-0 = <&card_detect>;
	169	cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
045644ff	170	};
0be5fef1 SK	171	/* WLAN */
	172	sdcc4: sdcc@121c0000 {
	173	status = "okay";
	174	};
045644ff	175	};
f335b8af KG	176	};
f335b8af KG	177	};