Commit | Line | Data |
---|---|---|
84b0b6bc BA |
1 | #include "qcom-apq8064-v2.0.dtsi" |
2 | #include <dt-bindings/gpio/gpio.h> | |
3 | #include <dt-bindings/input/input.h> | |
4 | #include <dt-bindings/mfd/qcom-rpm.h> | |
5 | #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> | |
6 | ||
7 | / { | |
8 | model = "Sony Xperia Z"; | |
9 | compatible = "sony,xperia-yuga", "qcom,apq8064"; | |
10 | ||
11 | aliases { | |
12 | serial0 = &gsbi5_serial; | |
13 | }; | |
14 | ||
15 | chosen { | |
16 | stdout-path = "serial0:115200n8"; | |
17 | }; | |
18 | ||
19 | gpio-keys { | |
20 | compatible = "gpio-keys"; | |
21 | input-name = "gpio-keys"; | |
22 | ||
23 | pinctrl-names = "default"; | |
24 | pinctrl-0 = <&gpio_keys_pin_a>; | |
25 | ||
26 | camera-focus { | |
27 | label = "camera_focus"; | |
28 | gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>; | |
29 | linux,input-type = <1>; | |
30 | linux,code = <KEY_CAMERA_FOCUS>; | |
31 | }; | |
32 | ||
33 | camera-snapshot { | |
34 | label = "camera_snapshot"; | |
35 | gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>; | |
36 | linux,input-type = <1>; | |
37 | linux,code = <KEY_CAMERA>; | |
38 | }; | |
39 | ||
40 | volume-down { | |
41 | label = "volume_down"; | |
42 | gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>; | |
43 | linux,input-type = <1>; | |
44 | linux,code = <KEY_VOLUMEDOWN>; | |
45 | }; | |
46 | ||
47 | volume-up { | |
48 | label = "volume_up"; | |
49 | gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>; | |
50 | linux,input-type = <1>; | |
51 | linux,code = <KEY_VOLUMEUP>; | |
52 | }; | |
53 | }; | |
54 | ||
55 | soc { | |
56 | pinctrl@800000 { | |
57 | gsbi5_uart_pin_a: gsbi5-uart-pin-active { | |
58 | rx { | |
59 | pins = "gpio52"; | |
60 | function = "gsbi5"; | |
61 | drive-strength = <2>; | |
62 | bias-pull-up; | |
63 | }; | |
64 | ||
65 | tx { | |
66 | pins = "gpio51"; | |
67 | function = "gsbi5"; | |
68 | drive-strength = <4>; | |
69 | bias-disable; | |
70 | }; | |
71 | }; | |
72 | ||
73 | sdcc1_pin_a: sdcc1-pin-active { | |
74 | clk { | |
75 | pins = "sdc1_clk"; | |
76 | drive-strengh = <16>; | |
77 | bias-disable; | |
78 | }; | |
79 | ||
80 | cmd { | |
81 | pins = "sdc1_cmd"; | |
82 | drive-strengh = <10>; | |
83 | bias-pull-up; | |
84 | }; | |
85 | ||
86 | data { | |
87 | pins = "sdc1_data"; | |
88 | drive-strengh = <10>; | |
89 | bias-pull-up; | |
90 | }; | |
91 | }; | |
92 | ||
93 | sdcc3_pin_a: sdcc3-pin-active { | |
94 | clk { | |
95 | pins = "sdc3_clk"; | |
96 | drive-strengh = <8>; | |
97 | bias-disable; | |
98 | }; | |
99 | ||
100 | cmd { | |
101 | pins = "sdc3_cmd"; | |
102 | drive-strengh = <8>; | |
103 | bias-pull-up; | |
104 | }; | |
105 | ||
106 | data { | |
107 | pins = "sdc3_data"; | |
108 | drive-strengh = <8>; | |
109 | bias-pull-up; | |
110 | }; | |
111 | }; | |
112 | ||
113 | sdcc3_cd_pin_a: sdcc3-cd-pin-active { | |
114 | pins = "gpio26"; | |
115 | function = "gpio"; | |
116 | ||
117 | drive-strength = <2>; | |
118 | bias-disable; | |
119 | }; | |
120 | }; | |
121 | ||
122 | ||
123 | rpm@108000 { | |
124 | regulators { | |
125 | vin_l1_l2_l12_l18-supply = <&pm8921_s4>; | |
126 | vin_lvs_1_3_6-supply = <&pm8921_s4>; | |
127 | vin_lvs_4_5_7-supply = <&pm8921_s4>; | |
128 | vin_ncp-supply = <&pm8921_l6>; | |
129 | vin_lvs2-supply = <&pm8921_s4>; | |
130 | vin_l24-supply = <&pm8921_s1>; | |
131 | vin_l25-supply = <&pm8921_s1>; | |
132 | vin_l27-supply = <&pm8921_s7>; | |
133 | vin_l28-supply = <&pm8921_s7>; | |
134 | ||
135 | /* Buck SMPS */ | |
136 | s1 { | |
137 | regulator-always-on; | |
138 | regulator-min-microvolt = <1225000>; | |
139 | regulator-max-microvolt = <1225000>; | |
140 | qcom,switch-mode-frequency = <3200000>; | |
141 | bias-pull-down; | |
142 | }; | |
143 | ||
144 | s2 { | |
145 | regulator-min-microvolt = <1300000>; | |
146 | regulator-max-microvolt = <1300000>; | |
147 | qcom,switch-mode-frequency = <1600000>; | |
148 | bias-pull-down; | |
149 | }; | |
150 | ||
151 | s3 { | |
152 | regulator-min-microvolt = <500000>; | |
153 | regulator-max-microvolt = <1150000>; | |
154 | qcom,switch-mode-frequency = <4800000>; | |
155 | bias-pull-down; | |
156 | }; | |
157 | ||
158 | s4 { | |
159 | regulator-always-on; | |
160 | regulator-min-microvolt = <1800000>; | |
161 | regulator-max-microvolt = <1800000>; | |
162 | qcom,switch-mode-frequency = <1600000>; | |
163 | bias-pull-down; | |
164 | qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; | |
165 | }; | |
166 | ||
167 | s7 { | |
168 | regulator-min-microvolt = <1300000>; | |
169 | regulator-max-microvolt = <1300000>; | |
170 | qcom,switch-mode-frequency = <3200000>; | |
171 | }; | |
172 | ||
173 | s8 { | |
174 | regulator-min-microvolt = <2200000>; | |
175 | regulator-max-microvolt = <2200000>; | |
176 | qcom,switch-mode-frequency = <1600000>; | |
177 | }; | |
178 | ||
179 | /* PMOS LDO */ | |
180 | l1 { | |
181 | regulator-always-on; | |
182 | regulator-min-microvolt = <1100000>; | |
183 | regulator-max-microvolt = <1100000>; | |
184 | bias-pull-down; | |
185 | }; | |
186 | ||
187 | l2 { | |
188 | regulator-min-microvolt = <1200000>; | |
189 | regulator-max-microvolt = <1200000>; | |
190 | bias-pull-down; | |
191 | }; | |
192 | ||
193 | l3 { | |
194 | regulator-min-microvolt = <3075000>; | |
195 | regulator-max-microvolt = <3075000>; | |
196 | bias-pull-down; | |
197 | }; | |
198 | ||
199 | l4 { | |
200 | regulator-always-on; | |
201 | regulator-min-microvolt = <1800000>; | |
202 | regulator-max-microvolt = <1800000>; | |
203 | bias-pull-down; | |
204 | }; | |
205 | ||
206 | l5 { | |
207 | regulator-min-microvolt = <2950000>; | |
208 | regulator-max-microvolt = <2950000>; | |
209 | bias-pull-down; | |
210 | }; | |
211 | ||
212 | l6 { | |
213 | regulator-min-microvolt = <2950000>; | |
214 | regulator-max-microvolt = <2950000>; | |
215 | bias-pull-down; | |
216 | }; | |
217 | ||
218 | l7 { | |
219 | regulator-min-microvolt = <1850000>; | |
220 | regulator-max-microvolt = <2950000>; | |
221 | bias-pull-down; | |
222 | }; | |
223 | ||
224 | l8 { | |
225 | regulator-min-microvolt = <2800000>; | |
226 | regulator-max-microvolt = <2800000>; | |
227 | bias-pull-down; | |
228 | }; | |
229 | ||
230 | l9 { | |
231 | regulator-min-microvolt = <3000000>; | |
232 | regulator-max-microvolt = <3000000>; | |
233 | bias-pull-down; | |
234 | }; | |
235 | ||
236 | l10 { | |
237 | regulator-min-microvolt = <2900000>; | |
238 | regulator-max-microvolt = <2900000>; | |
239 | bias-pull-down; | |
240 | }; | |
241 | ||
242 | l11 { | |
243 | regulator-min-microvolt = <3000000>; | |
244 | regulator-max-microvolt = <3000000>; | |
245 | bias-pull-down; | |
246 | }; | |
247 | ||
248 | l12 { | |
249 | regulator-min-microvolt = <1200000>; | |
250 | regulator-max-microvolt = <1200000>; | |
251 | bias-pull-down; | |
252 | }; | |
253 | ||
254 | l14 { | |
255 | regulator-min-microvolt = <1800000>; | |
256 | regulator-max-microvolt = <1800000>; | |
257 | bias-pull-down; | |
258 | }; | |
259 | ||
260 | l15 { | |
261 | regulator-min-microvolt = <1800000>; | |
262 | regulator-max-microvolt = <2950000>; | |
263 | bias-pull-down; | |
264 | }; | |
265 | ||
266 | l16 { | |
267 | regulator-min-microvolt = <2800000>; | |
268 | regulator-max-microvolt = <2800000>; | |
269 | bias-pull-down; | |
270 | }; | |
271 | ||
272 | l17 { | |
273 | regulator-min-microvolt = <2000000>; | |
274 | regulator-max-microvolt = <2000000>; | |
275 | bias-pull-down; | |
276 | }; | |
277 | ||
278 | l18 { | |
279 | regulator-min-microvolt = <1200000>; | |
280 | regulator-max-microvolt = <1200000>; | |
281 | bias-pull-down; | |
282 | }; | |
283 | ||
284 | l21 { | |
285 | regulator-min-microvolt = <1050000>; | |
286 | regulator-max-microvolt = <1050000>; | |
287 | bias-pull-down; | |
288 | }; | |
289 | ||
290 | l22 { | |
291 | regulator-min-microvolt = <2600000>; | |
292 | regulator-max-microvolt = <2600000>; | |
293 | bias-pull-down; | |
294 | }; | |
295 | ||
296 | l23 { | |
297 | regulator-min-microvolt = <1800000>; | |
298 | regulator-max-microvolt = <1800000>; | |
299 | bias-pull-down; | |
300 | }; | |
301 | ||
302 | l24 { | |
303 | regulator-min-microvolt = <750000>; | |
304 | regulator-max-microvolt = <1150000>; | |
305 | bias-pull-down; | |
306 | }; | |
307 | ||
308 | l25 { | |
309 | regulator-always-on; | |
310 | regulator-min-microvolt = <1250000>; | |
311 | regulator-max-microvolt = <1250000>; | |
312 | bias-pull-down; | |
313 | }; | |
314 | ||
315 | l27 { | |
316 | regulator-min-microvolt = <1100000>; | |
317 | regulator-max-microvolt = <1100000>; | |
318 | }; | |
319 | ||
320 | l28 { | |
321 | regulator-min-microvolt = <1050000>; | |
322 | regulator-max-microvolt = <1050000>; | |
323 | bias-pull-down; | |
324 | }; | |
325 | ||
326 | l29 { | |
327 | regulator-min-microvolt = <2000000>; | |
328 | regulator-max-microvolt = <2000000>; | |
329 | bias-pull-down; | |
330 | }; | |
331 | ||
332 | /* Low Voltage Switch */ | |
333 | lvs1 { | |
334 | bias-pull-down; | |
335 | }; | |
336 | ||
337 | lvs2 { | |
338 | bias-pull-down; | |
339 | }; | |
340 | ||
341 | lvs3 { | |
342 | bias-pull-down; | |
343 | }; | |
344 | ||
345 | lvs4 { | |
346 | bias-pull-down; | |
347 | }; | |
348 | ||
349 | lvs5 { | |
350 | bias-pull-down; | |
351 | }; | |
352 | ||
353 | lvs6 { | |
354 | bias-pull-down; | |
355 | }; | |
356 | ||
357 | lvs7 { | |
358 | bias-pull-down; | |
359 | }; | |
360 | ||
361 | usb-switch {}; | |
362 | ||
363 | hdmi-switch {}; | |
364 | ||
365 | ncp { | |
366 | regulator-min-microvolt = <1800000>; | |
367 | regulator-max-microvolt = <1800000>; | |
368 | qcom,switch-mode-frequency = <1600000>; | |
369 | }; | |
370 | }; | |
371 | }; | |
372 | ||
373 | qcom,ssbi@500000 { | |
374 | pmic@0 { | |
375 | gpio@150 { | |
376 | gpio_keys_pin_a: gpio-keys-pin-active { | |
377 | pins = "gpio3", "gpio4", "gpio29", "gpio35"; | |
378 | function = "normal"; | |
379 | ||
380 | bias-pull-up; | |
381 | drive-push-pull; | |
382 | input-enable; | |
383 | power-source = <2>; | |
384 | qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; | |
385 | qcom,pull-up-strength = <0>; | |
386 | }; | |
387 | }; | |
388 | }; | |
389 | }; | |
390 | ||
391 | phy@12500000 { | |
392 | status = "okay"; | |
393 | vddcx-supply = <&pm8921_s3>; | |
394 | v3p3-supply = <&pm8921_l3>; | |
395 | v1p8-supply = <&pm8921_l4>; | |
396 | }; | |
397 | ||
398 | gadget@12500000 { | |
399 | status = "okay"; | |
400 | }; | |
401 | ||
402 | gsbi@1a200000 { | |
403 | status = "ok"; | |
404 | qcom,mode = <GSBI_PROT_I2C_UART>; | |
405 | ||
406 | serial@1a240000 { | |
407 | status = "ok"; | |
408 | ||
409 | pinctrl-names = "default"; | |
410 | pinctrl-0 = <&gsbi5_uart_pin_a>; | |
411 | }; | |
412 | }; | |
413 | ||
414 | amba { | |
415 | sdcc1: sdcc@12400000 { | |
416 | status = "okay"; | |
417 | ||
418 | vmmc-supply = <&pm8921_l5>; | |
419 | vqmmc-supply = <&pm8921_s4>; | |
420 | ||
421 | pinctrl-names = "default"; | |
422 | pinctrl-0 = <&sdcc1_pin_a>; | |
423 | }; | |
424 | ||
425 | sdcc3: sdcc@12180000 { | |
426 | status = "okay"; | |
427 | ||
428 | vmmc-supply = <&pm8921_l6>; | |
429 | cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; | |
430 | ||
431 | pinctrl-names = "default"; | |
432 | pinctrl-0 = <&sdcc3_pin_a>, <&sdcc3_cd_pin_a>; | |
433 | }; | |
434 | }; | |
435 | }; | |
436 | }; |