[deliverable/linux.git] / arch / arm / boot / dts / sun4i-a10-ba10-tvbox.dts

/*
 * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This file is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License, or (at your option) any later version.
 *
 *     This file is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 *     You should have received a copy of the GNU General Public
 *     License along with this file; if not, write to the Free
 *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
 *     MA 02110-1301 USA
 *
 * Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */

/dts-v1/;
#include "sun4i-a10.dtsi"
#include "sunxi-common-regulators.dtsi"

#include <dt-bindings/gpio/gpio.h>

/ {
	model = "BA10 tvbox";
	compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10";

	soc@01c00000 {
		emac: ethernet@01c0b000 {
			pinctrl-names = "default";
			pinctrl-0 = <&emac_pins_a>;
			phy = <&phy1>;
			status = "okay";
		};

		mdio@01c0b080 {
			status = "okay";

			phy1: ethernet-phy@1 {
				reg = <1>;
			};
		};

		mmc0: mmc@01c0f000 {
			pinctrl-names = "default";
			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
			vmmc-supply = <&reg_vcc3v3>;
			bus-width = <4>;
			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
			cd-inverted;
			status = "okay";
		};

		usbphy: phy@01c13400 {
			usb1_vbus-supply = <&reg_usb1_vbus>;
			usb2_vbus-supply = <&reg_usb2_vbus>;
			status = "okay";
		};

		ehci0: usb@01c14000 {
			status = "okay";
		};

		ohci0: usb@01c14400 {
			status = "okay";
		};

		ehci1: usb@01c1c000 {
			status = "okay";
		};

		ohci1: usb@01c1c400 {
			status = "okay";
		};

		pinctrl@01c20800 {
			usb2_vbus_pin_a: usb2_vbus_pin@0 {
				allwinner,pins = "PH12";
			};
		};

		ir0: ir@01c21800 {
			pinctrl-names = "default";
			pinctrl-0 = <&ir0_pins_a>;
			status = "okay";
		};

		uart0: serial@01c28000 {
			pinctrl-names = "default";
			pinctrl-0 = <&uart0_pins_a>;
			status = "okay";
		};

		i2c0: i2c@01c2ac00 {
			pinctrl-names = "default";
			pinctrl-0 = <&i2c0_pins_a>;
			status = "okay";

			axp209: pmic@34 {
				compatible = "x-powers,axp209";
				reg = <0x34>;
				interrupts = <0>;

				interrupt-controller;
				#interrupt-cells = <1>;
			};
		};
	};

	reg_usb1_vbus: usb1-vbus {
		status = "okay";
	};

	reg_usb2_vbus: usb2-vbus {
		gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
		status = "okay";
	};
};
Commit	Line	Data
97cb8f1e HG	1	/*
	2	* Copyright 2014 Hans de Goede <hdegoede@redhat.com>
	3	*
27f38a77 MR	4	* This file is dual-licensed: you can use it either under the terms
	5	* of the GPL or the X11 license, at your option. Note that this dual
	6	* licensing only applies to this file, and not this project as a
	7	* whole.
97cb8f1e	8	*
27f38a77 MR	9	* a) This file is free software; you can redistribute it and/or
	10	* modify it under the terms of the GNU General Public License as
	11	* published by the Free Software Foundation; either version 2 of the
	12	* License, or (at your option) any later version.
	13	*
	14	* This file is distributed in the hope that it will be useful,
	15	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	16	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	17	* GNU General Public License for more details.
	18	*
	19	* You should have received a copy of the GNU General Public
	20	* License along with this file; if not, write to the Free
	21	* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
	22	* MA 02110-1301 USA
	23	*
	24	* Or, alternatively,
	25	*
	26	* b) Permission is hereby granted, free of charge, to any person
	27	* obtaining a copy of this software and associated documentation
	28	* files (the "Software"), to deal in the Software without
	29	* restriction, including without limitation the rights to use,
	30	* copy, modify, merge, publish, distribute, sublicense, and/or
	31	* sell copies of the Software, and to permit persons to whom the
	32	* Software is furnished to do so, subject to the following
	33	* conditions:
	34	*
	35	* The above copyright notice and this permission notice shall be
	36	* included in all copies or substantial portions of the Software.
	37	*
	38	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	39	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	40	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	41	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	42	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	43	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	44	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	45	* OTHER DEALINGS IN THE SOFTWARE.
97cb8f1e HG	46	*/
	47
	48	/dts-v1/;
71455701 MR	49	#include "sun4i-a10.dtsi"
71455701 MR	50	#include "sunxi-common-regulators.dtsi"
97cb8f1e	51
bca12924 MR	52	#include <dt-bindings/gpio/gpio.h>
bca12924 MR	53
97cb8f1e HG	54	/ {
	55	model = "BA10 tvbox";
	56	compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10";
	57
	58	soc@01c00000 {
	59	emac: ethernet@01c0b000 {
	60	pinctrl-names = "default";
	61	pinctrl-0 = <&emac_pins_a>;
	62	phy = <&phy1>;
	63	status = "okay";
	64	};
	65
	66	mdio@01c0b080 {
	67	status = "okay";
	68
	69	phy1: ethernet-phy@1 {
	70	reg = <1>;
	71	};
	72	};
	73
	74	mmc0: mmc@01c0f000 {
	75	pinctrl-names = "default";
	76	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
	77	vmmc-supply = <&reg_vcc3v3>;
	78	bus-width = <4>;
bca12924	79	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
97cb8f1e HG	80	cd-inverted;
	81	status = "okay";
	82	};
	83
	84	usbphy: phy@01c13400 {
	85	usb1_vbus-supply = <&reg_usb1_vbus>;
	86	usb2_vbus-supply = <&reg_usb2_vbus>;
	87	status = "okay";
	88	};
	89
	90	ehci0: usb@01c14000 {
	91	status = "okay";
	92	};
	93
	94	ohci0: usb@01c14400 {
	95	status = "okay";
	96	};
	97
	98	ehci1: usb@01c1c000 {
	99	status = "okay";
	100	};
	101
	102	ohci1: usb@01c1c400 {
	103	status = "okay";
	104	};
	105
	106	pinctrl@01c20800 {
	107	usb2_vbus_pin_a: usb2_vbus_pin@0 {
	108	allwinner,pins = "PH12";
	109	};
	110	};
	111
	112	ir0: ir@01c21800 {
	113	pinctrl-names = "default";
	114	pinctrl-0 = <&ir0_pins_a>;
	115	status = "okay";
	116	};
	117
	118	uart0: serial@01c28000 {
	119	pinctrl-names = "default";
	120	pinctrl-0 = <&uart0_pins_a>;
	121	status = "okay";
	122	};
	123
	124	i2c0: i2c@01c2ac00 {
	125	pinctrl-names = "default";
	126	pinctrl-0 = <&i2c0_pins_a>;
	127	status = "okay";
	128
	129	axp209: pmic@34 {
	130	compatible = "x-powers,axp209";
	131	reg = <0x34>;
	132	interrupts = <0>;
	133
	134	interrupt-controller;
	135	#interrupt-cells = <1>;
	136	};
	137	};
	138	};
	139
	140	reg_usb1_vbus: usb1-vbus {
	141	status = "okay";
	142	};
	143
144	reg_usb2_vbus: usb2-vbus {
bca12924	145	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
97cb8f1e HG	146	status = "okay";
	147	};
	148	};