[deliverable/linux.git] / arch / arm / boot / dts / tegra30-colibri-eval-v3.dts

/dts-v1/;

#include "tegra30-colibri.dtsi"

/ {
	model = "Toradex Colibri T30 on Colibri Evaluation Board";
	compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30", "nvidia,tegra30";

	aliases {
		rtc0 = "/i2c@7000c000/rtc@68";
		rtc1 = "/i2c@7000d000/tps65911@2d";
		rtc2 = "/rtc@7000e000";
		serial0 = &uarta;
		serial1 = &uartb;
		serial2 = &uartd;
	};

	host1x@50000000 {
		dc@54200000 {
			rgb {
				status = "okay";
				nvidia,panel = <&panel>;
			};
		};
		hdmi@54280000 {
			status = "okay";
		};
	};

	serial@70006000 {
		status = "okay";
	};

	serial@70006040 {
		compatible = "nvidia,tegra30-hsuart";
		status = "okay";
	};

	serial@70006300 {
		compatible = "nvidia,tegra30-hsuart";
		status = "okay";
	};

	pwm@7000a000 {
		status = "okay";
	};

	/*
	 * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
	 * board)
	 */
	i2c@7000c000 {
		status = "okay";
		clock-frequency = <100000>;

		/* M41T0M6 real time clock on carrier board */
		rtc@68 {
			compatible = "st,m41t00";
			reg = <0x68>;
		};
	};

	/* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
	hdmiddc: i2c@7000c700 {
		status = "okay";
	};

	/* SPI1: Colibri SSP */
	spi@7000d400 {
		status = "okay";
		spi-max-frequency = <25000000>;
		can0: can@0 {
			compatible = "microchip,mcp2515";
			reg = <0>;
			clocks = <&clk16m>;
			interrupt-parent = <&gpio>;
			interrupts = <TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>;
			spi-max-frequency = <10000000>;
		};
		spidev0: spi@1 {
			compatible = "spidev";
			reg = <1>;
			spi-max-frequency = <25000000>;
		};
	};

	/* SD/MMC */
	sdhci@78000200 {
		status = "okay";
		bus-width = <4>;
		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
		no-1-8-v;
	};

	/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
	usb@7d000000 {
		status = "okay";
	};

	usb-phy@7d000000 {
		status = "okay";
		dr_mode = "otg";
		vbus-supply = <&usbc_vbus_reg>;
	};

	/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
	usb@7d008000 {
		status = "okay";
	};

	usb-phy@7d008000 {
		status = "okay";
		vbus-supply = <&usbh_vbus_reg>;
	};

	backlight: backlight {
		compatible = "pwm-backlight";

		/* PWM<A> */
		pwms = <&pwm 0 5000000>;
		brightness-levels = <255 128 64 32 16 8 4 0>;
		default-brightness-level = <6>;
		/* BL_ON */
		enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
	};

	clocks {
		clk16m: clk@1 {
			compatible = "fixed-clock";
			reg=<1>;
			#clock-cells = <0>;
			clock-frequency = <16000000>;
			clock-output-names = "clk16m";
		};
	};

	gpio-keys {
		compatible = "gpio-keys";

		wakeup {
			label = "SODIMM pin 45 wakeup";
			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
			linux,code = <KEY_WAKEUP>;
			debounce-interval = <10>;
			gpio-key,wakeup;
		};
	};

	panel: panel {
		/*
		 * edt,et057090dhu: EDT 5.7" LCD TFT
		 * edt,et070080dh6: EDT 7.0" LCD TFT
		 */
		compatible = "edt,et057090dhu", "simple-panel";

		backlight = <&backlight>;
	};

	pwmleds {
		compatible = "pwm-leds";

		pwmb {
			label = "PWM<B>";
			pwms = <&pwm 1 19600>;
			max-brightness = <255>;
		};
		pwmc {
			label = "PWM<C>";
			pwms = <&pwm 2 19600>;
			max-brightness = <255>;
		};
		pwmd {
			label = "PWM<D>";
			pwms = <&pwm 3 19600>;
			max-brightness = <255>;
		};
	};

	regulators {
		sys_5v0_reg: regulator@1 {
			compatible = "regulator-fixed";
			reg = <1>;
			regulator-name = "5v0";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			regulator-always-on;
		};

		usbc_vbus_reg: regulator@2 {
			compatible = "regulator-fixed";
			reg = <2>;
			regulator-name = "usbc_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			vin-supply = <&sys_5v0_reg>;
		};

		/* USBH_PEN */
		usbh_vbus_reg: regulator@3 {
			compatible = "regulator-fixed";
			reg = <3>;
			regulator-name = "usbh_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
			vin-supply = <&sys_5v0_reg>;
		};
	};
};
Commit	Line	Data
446e9c63 SA	1	/dts-v1/;
	2
	3	#include "tegra30-colibri.dtsi"
	4
	5	/ {
	6	model = "Toradex Colibri T30 on Colibri Evaluation Board";
	7	compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30", "nvidia,tegra30";
	8
	9	aliases {
	10	rtc0 = "/i2c@7000c000/rtc@68";
	11	rtc1 = "/i2c@7000d000/tps65911@2d";
	12	rtc2 = "/rtc@7000e000";
c4574aa0 OJ	13	serial0 = &uarta;
	14	serial1 = &uartb;
	15	serial2 = &uartd;
446e9c63 SA	16	};
	17
	18	host1x@50000000 {
	19	dc@54200000 {
	20	rgb {
	21	status = "okay";
	22	nvidia,panel = <&panel>;
	23	};
	24	};
	25	hdmi@54280000 {
	26	status = "okay";
	27	};
	28	};
	29
	30	serial@70006000 {
	31	status = "okay";
	32	};
	33
	34	serial@70006040 {
	35	compatible = "nvidia,tegra30-hsuart";
	36	status = "okay";
	37	};
	38
	39	serial@70006300 {
	40	compatible = "nvidia,tegra30-hsuart";
	41	status = "okay";
	42	};
	43
	44	pwm@7000a000 {
	45	status = "okay";
	46	};
	47
	48	/*
	49	* GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
	50	* board)
	51	*/
	52	i2c@7000c000 {
	53	status = "okay";
	54	clock-frequency = <100000>;
	55
	56	/* M41T0M6 real time clock on carrier board */
	57	rtc@68 {
e4212ffa	58	compatible = "st,m41t00";
446e9c63 SA	59	reg = <0x68>;
	60	};
	61	};
	62
	63	/* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
	64	hdmiddc: i2c@7000c700 {
	65	status = "okay";
	66	};
	67
	68	/* SPI1: Colibri SSP */
	69	spi@7000d400 {
	70	status = "okay";
	71	spi-max-frequency = <25000000>;
	72	can0: can@0 {
	73	compatible = "microchip,mcp2515";
	74	reg = <0>;
	75	clocks = <&clk16m>;
	76	interrupt-parent = <&gpio>;
	77	interrupts = <TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>;
	78	spi-max-frequency = <10000000>;
	79	};
	80	spidev0: spi@1 {
	81	compatible = "spidev";
	82	reg = <1>;
	83	spi-max-frequency = <25000000>;
	84	};
	85	};
	86
ccb43161	87	/* SD/MMC */
446e9c63 SA	88	sdhci@78000200 {
	89	status = "okay";
	90	bus-width = <4>;
	91	cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
	92	no-1-8-v;
	93	};
	94
	95	/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
	96	usb@7d000000 {
	97	status = "okay";
	98	};
	99
	100	usb-phy@7d000000 {
	101	status = "okay";
	102	dr_mode = "otg";
	103	vbus-supply = <&usbc_vbus_reg>;
	104	};
	105
	106	/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
	107	usb@7d008000 {
	108	status = "okay";
	109	};
	110
	111	usb-phy@7d008000 {
	112	status = "okay";
	113	vbus-supply = <&usbh_vbus_reg>;
	114	};
	115
	116	backlight: backlight {
	117	compatible = "pwm-backlight";
	118
	119	/* PWM<A> */
	120	pwms = <&pwm 0 5000000>;
	121	brightness-levels = <255 128 64 32 16 8 4 0>;
	122	default-brightness-level = <6>;
	123	/* BL_ON */
	124	enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
	125	};
	126
	127	clocks {
	128	clk16m: clk@1 {
	129	compatible = "fixed-clock";
	130	reg=<1>;
	131	#clock-cells = <0>;
	132	clock-frequency = <16000000>;
	133	clock-output-names = "clk16m";
	134	};
	135	};
	136
	137	gpio-keys {
	138	compatible = "gpio-keys";
	139
3f533132 MZ	140	wakeup {
3f533132 MZ	141	label = "SODIMM pin 45 wakeup";
446e9c63	142	gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
3f533132	143	linux,code = <KEY_WAKEUP>;
446e9c63 SA	144	debounce-interval = <10>;
	145	gpio-key,wakeup;
	146	};
	147	};
	148
	149	panel: panel {
	150	/*
	151	* edt,et057090dhu: EDT 5.7" LCD TFT
	152	* edt,et070080dh6: EDT 7.0" LCD TFT
	153	*/
	154	compatible = "edt,et057090dhu", "simple-panel";
	155
	156	backlight = <&backlight>;
	157	};
	158
	159	pwmleds {
	160	compatible = "pwm-leds";
	161
	162	pwmb {
	163	label = "PWM<B>";
	164	pwms = <&pwm 1 19600>;
	165	max-brightness = <255>;
	166	};
	167	pwmc {
	168	label = "PWM<C>";
	169	pwms = <&pwm 2 19600>;
	170	max-brightness = <255>;
	171	};
	172	pwmd {
	173	label = "PWM<D>";
	174	pwms = <&pwm 3 19600>;
	175	max-brightness = <255>;
	176	};
	177	};
	178
	179	regulators {
	180	sys_5v0_reg: regulator@1 {
	181	compatible = "regulator-fixed";
	182	reg = <1>;
	183	regulator-name = "5v0";
	184	regulator-min-microvolt = <5000000>;
	185	regulator-max-microvolt = <5000000>;
	186	regulator-always-on;
	187	};
	188
	189	usbc_vbus_reg: regulator@2 {
	190	compatible = "regulator-fixed";
	191	reg = <2>;
	192	regulator-name = "usbc_vbus";
	193	regulator-min-microvolt = <5000000>;
	194	regulator-max-microvolt = <5000000>;
	195	vin-supply = <&sys_5v0_reg>;
	196	};
	197
	198	/* USBH_PEN */
	199	usbh_vbus_reg: regulator@3 {
	200	compatible = "regulator-fixed";
	201	reg = <3>;
	202	regulator-name = "usbh_vbus";
	203	regulator-min-microvolt = <5000000>;
	204	regulator-max-microvolt = <5000000>;
	205	gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
	206	vin-supply = <&sys_5v0_reg>;
	207	};
208	};
209	};