Commit | Line | Data |
---|---|---|
e06f1a9e | 1 | /* |
aeb29453 | 2 | * Copyright (C) 2011 - 2014 Xilinx |
e06f1a9e JC |
3 | * Copyright (C) 2012 National Instruments Corp. |
4 | * | |
5 | * This software is licensed under the terms of the GNU General Public | |
6 | * License version 2, as published by the Free Software Foundation, and | |
7 | * may be copied, distributed, and modified under those terms. | |
8 | * | |
9 | * This program is distributed in the hope that it will be useful, | |
10 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
11 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
12 | * GNU General Public License for more details. | |
13 | */ | |
14 | /dts-v1/; | |
15 | /include/ "zynq-7000.dtsi" | |
16 | ||
17 | / { | |
18 | model = "Zynq ZC702 Development Board"; | |
19 | compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000"; | |
20 | ||
ab216ac5 MS |
21 | aliases { |
22 | ethernet0 = &gem0; | |
23 | i2c0 = &i2c0; | |
24 | serial0 = &uart1; | |
25 | }; | |
26 | ||
e06f1a9e JC |
27 | memory { |
28 | device_type = "memory"; | |
29 | reg = <0x0 0x40000000>; | |
30 | }; | |
31 | ||
32 | chosen { | |
2221043b MS |
33 | bootargs = "earlyprintk"; |
34 | stdout-path = "serial0:115200n8"; | |
e06f1a9e JC |
35 | }; |
36 | ||
b76da4d8 ES |
37 | gpio-keys { |
38 | compatible = "gpio-keys"; | |
39 | #address-cells = <1>; | |
40 | #size-cells = <0>; | |
41 | autorepeat; | |
42 | sw14 { | |
43 | label = "sw14"; | |
44 | gpios = <&gpio0 12 0>; | |
45 | linux,code = <108>; /* down */ | |
b0d12e9a | 46 | wakeup-source; |
b76da4d8 ES |
47 | autorepeat; |
48 | }; | |
49 | sw13 { | |
50 | label = "sw13"; | |
51 | gpios = <&gpio0 14 0>; | |
52 | linux,code = <103>; /* up */ | |
b0d12e9a | 53 | wakeup-source; |
b76da4d8 ES |
54 | autorepeat; |
55 | }; | |
56 | }; | |
57 | ||
f8aa6867 ES |
58 | leds { |
59 | compatible = "gpio-leds"; | |
60 | ||
61 | ds23 { | |
62 | label = "ds23"; | |
63 | gpios = <&gpio0 10 0>; | |
64 | linux,default-trigger = "heartbeat"; | |
65 | }; | |
66 | }; | |
1643b316 SB |
67 | |
68 | usb_phy0: phy0 { | |
69 | compatible = "usb-nop-xceiv"; | |
70 | #phy-cells = <0>; | |
71 | }; | |
6835fe48 MS |
72 | }; |
73 | ||
74 | &amba { | |
75 | ocm: sram@fffc0000 { | |
76 | compatible = "mmio-sram"; | |
77 | reg = <0xfffc0000 0x10000>; | |
78 | }; | |
e06f1a9e | 79 | }; |
ec11ebcf | 80 | |
fdf26183 MS |
81 | &can0 { |
82 | status = "okay"; | |
f52948ea SB |
83 | pinctrl-names = "default"; |
84 | pinctrl-0 = <&pinctrl_can0_default>; | |
fdf26183 MS |
85 | }; |
86 | ||
8c7634c0 PC |
87 | &clkc { |
88 | ps-clk-frequency = <33333333>; | |
89 | }; | |
90 | ||
982264c3 ST |
91 | &gem0 { |
92 | status = "okay"; | |
da45581e | 93 | phy-mode = "rgmii-id"; |
f62f4047 | 94 | phy-handle = <ðernet_phy>; |
f52948ea SB |
95 | pinctrl-names = "default"; |
96 | pinctrl-0 = <&pinctrl_gem0_default>; | |
f62f4047 SB |
97 | |
98 | ethernet_phy: ethernet-phy@7 { | |
99 | reg = <7>; | |
100 | }; | |
982264c3 ST |
101 | }; |
102 | ||
f52948ea SB |
103 | &gpio0 { |
104 | pinctrl-names = "default"; | |
105 | pinctrl-0 = <&pinctrl_gpio0_default>; | |
106 | }; | |
107 | ||
0f6faa3f SB |
108 | &i2c0 { |
109 | status = "okay"; | |
110 | clock-frequency = <400000>; | |
f52948ea SB |
111 | pinctrl-names = "default"; |
112 | pinctrl-0 = <&pinctrl_i2c0_default>; | |
0f6faa3f SB |
113 | |
114 | i2cswitch@74 { | |
115 | compatible = "nxp,pca9548"; | |
116 | #address-cells = <1>; | |
117 | #size-cells = <0>; | |
118 | reg = <0x74>; | |
119 | ||
120 | i2c@0 { | |
121 | #address-cells = <1>; | |
122 | #size-cells = <0>; | |
123 | reg = <0>; | |
124 | si570: clock-generator@5d { | |
125 | #clock-cells = <0>; | |
126 | compatible = "silabs,si570"; | |
127 | temperature-stability = <50>; | |
128 | reg = <0x5d>; | |
129 | factory-fout = <156250000>; | |
130 | clock-frequency = <148500000>; | |
131 | }; | |
132 | }; | |
133 | ||
134 | i2c@2 { | |
135 | #address-cells = <1>; | |
136 | #size-cells = <0>; | |
137 | reg = <2>; | |
138 | eeprom@54 { | |
139 | compatible = "at,24c08"; | |
140 | reg = <0x54>; | |
141 | }; | |
142 | }; | |
143 | ||
144 | i2c@3 { | |
145 | #address-cells = <1>; | |
146 | #size-cells = <0>; | |
147 | reg = <3>; | |
148 | gpio@21 { | |
149 | compatible = "ti,tca6416"; | |
150 | reg = <0x21>; | |
151 | gpio-controller; | |
152 | #gpio-cells = <2>; | |
153 | }; | |
154 | }; | |
155 | ||
156 | i2c@4 { | |
157 | #address-cells = <1>; | |
158 | #size-cells = <0>; | |
159 | reg = <4>; | |
160 | rtc@51 { | |
161 | compatible = "nxp,pcf8563"; | |
162 | reg = <0x51>; | |
163 | }; | |
164 | }; | |
165 | ||
166 | i2c@7 { | |
167 | #address-cells = <1>; | |
168 | #size-cells = <0>; | |
169 | reg = <7>; | |
170 | hwmon@52 { | |
171 | compatible = "ti,ucd9248"; | |
172 | reg = <52>; | |
173 | }; | |
174 | hwmon@53 { | |
175 | compatible = "ti,ucd9248"; | |
176 | reg = <53>; | |
177 | }; | |
178 | hwmon@54 { | |
179 | compatible = "ti,ucd9248"; | |
180 | reg = <54>; | |
181 | }; | |
182 | }; | |
183 | }; | |
184 | }; | |
185 | ||
f52948ea SB |
186 | &pinctrl0 { |
187 | pinctrl_can0_default: can0-default { | |
188 | mux { | |
189 | function = "can0"; | |
190 | groups = "can0_9_grp"; | |
191 | }; | |
192 | ||
193 | conf { | |
194 | groups = "can0_9_grp"; | |
195 | slew-rate = <0>; | |
196 | io-standard = <1>; | |
197 | }; | |
198 | ||
199 | conf-rx { | |
200 | pins = "MIO46"; | |
201 | bias-high-impedance; | |
202 | }; | |
203 | ||
204 | conf-tx { | |
205 | pins = "MIO47"; | |
206 | bias-disable; | |
207 | }; | |
208 | }; | |
209 | ||
210 | pinctrl_gem0_default: gem0-default { | |
211 | mux { | |
212 | function = "ethernet0"; | |
213 | groups = "ethernet0_0_grp"; | |
214 | }; | |
215 | ||
216 | conf { | |
217 | groups = "ethernet0_0_grp"; | |
218 | slew-rate = <0>; | |
219 | io-standard = <4>; | |
220 | }; | |
221 | ||
222 | conf-rx { | |
223 | pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27"; | |
224 | bias-high-impedance; | |
225 | low-power-disable; | |
226 | }; | |
227 | ||
228 | conf-tx { | |
229 | pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21"; | |
230 | bias-disable; | |
231 | low-power-enable; | |
232 | }; | |
233 | ||
234 | mux-mdio { | |
235 | function = "mdio0"; | |
236 | groups = "mdio0_0_grp"; | |
237 | }; | |
238 | ||
239 | conf-mdio { | |
240 | groups = "mdio0_0_grp"; | |
241 | slew-rate = <0>; | |
242 | io-standard = <1>; | |
243 | bias-disable; | |
244 | }; | |
245 | }; | |
246 | ||
247 | pinctrl_gpio0_default: gpio0-default { | |
248 | mux { | |
249 | function = "gpio0"; | |
250 | groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp", | |
251 | "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp", | |
252 | "gpio0_13_grp", "gpio0_14_grp"; | |
253 | }; | |
254 | ||
255 | conf { | |
256 | groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp", | |
257 | "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp", | |
258 | "gpio0_13_grp", "gpio0_14_grp"; | |
259 | slew-rate = <0>; | |
260 | io-standard = <1>; | |
261 | }; | |
262 | ||
263 | conf-pull-up { | |
264 | pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14"; | |
265 | bias-pull-up; | |
266 | }; | |
267 | ||
268 | conf-pull-none { | |
269 | pins = "MIO7", "MIO8"; | |
270 | bias-disable; | |
271 | }; | |
272 | }; | |
273 | ||
274 | pinctrl_i2c0_default: i2c0-default { | |
275 | mux { | |
276 | groups = "i2c0_10_grp"; | |
277 | function = "i2c0"; | |
278 | }; | |
279 | ||
280 | conf { | |
281 | groups = "i2c0_10_grp"; | |
282 | bias-pull-up; | |
283 | slew-rate = <0>; | |
284 | io-standard = <1>; | |
285 | }; | |
286 | }; | |
287 | ||
288 | pinctrl_sdhci0_default: sdhci0-default { | |
289 | mux { | |
290 | groups = "sdio0_2_grp"; | |
291 | function = "sdio0"; | |
292 | }; | |
293 | ||
294 | conf { | |
295 | groups = "sdio0_2_grp"; | |
296 | slew-rate = <0>; | |
297 | io-standard = <1>; | |
298 | bias-disable; | |
299 | }; | |
300 | ||
301 | mux-cd { | |
302 | groups = "gpio0_0_grp"; | |
303 | function = "sdio0_cd"; | |
304 | }; | |
305 | ||
306 | conf-cd { | |
307 | groups = "gpio0_0_grp"; | |
308 | bias-high-impedance; | |
309 | bias-pull-up; | |
310 | slew-rate = <0>; | |
311 | io-standard = <1>; | |
312 | }; | |
313 | ||
314 | mux-wp { | |
315 | groups = "gpio0_15_grp"; | |
316 | function = "sdio0_wp"; | |
317 | }; | |
318 | ||
319 | conf-wp { | |
320 | groups = "gpio0_15_grp"; | |
321 | bias-high-impedance; | |
322 | bias-pull-up; | |
323 | slew-rate = <0>; | |
324 | io-standard = <1>; | |
325 | }; | |
326 | }; | |
327 | ||
328 | pinctrl_uart1_default: uart1-default { | |
329 | mux { | |
330 | groups = "uart1_10_grp"; | |
331 | function = "uart1"; | |
332 | }; | |
333 | ||
334 | conf { | |
335 | groups = "uart1_10_grp"; | |
336 | slew-rate = <0>; | |
337 | io-standard = <1>; | |
338 | }; | |
339 | ||
340 | conf-rx { | |
341 | pins = "MIO49"; | |
342 | bias-high-impedance; | |
343 | }; | |
344 | ||
345 | conf-tx { | |
346 | pins = "MIO48"; | |
38c735f3 | 347 | bias-disable; |
f52948ea SB |
348 | }; |
349 | }; | |
0c79b9fe SB |
350 | |
351 | pinctrl_usb0_default: usb0-default { | |
352 | mux { | |
353 | groups = "usb0_0_grp"; | |
354 | function = "usb0"; | |
355 | }; | |
356 | ||
357 | conf { | |
358 | groups = "usb0_0_grp"; | |
359 | slew-rate = <0>; | |
360 | io-standard = <1>; | |
361 | }; | |
362 | ||
363 | conf-rx { | |
364 | pins = "MIO29", "MIO31", "MIO36"; | |
365 | bias-high-impedance; | |
366 | }; | |
367 | ||
368 | conf-tx { | |
369 | pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34", | |
370 | "MIO35", "MIO37", "MIO38", "MIO39"; | |
371 | bias-disable; | |
372 | }; | |
373 | }; | |
f52948ea SB |
374 | }; |
375 | ||
3f7c7302 SB |
376 | &sdhci0 { |
377 | status = "okay"; | |
f52948ea SB |
378 | pinctrl-names = "default"; |
379 | pinctrl-0 = <&pinctrl_sdhci0_default>; | |
3f7c7302 SB |
380 | }; |
381 | ||
ec11ebcf SB |
382 | &uart1 { |
383 | status = "okay"; | |
f52948ea SB |
384 | pinctrl-names = "default"; |
385 | pinctrl-0 = <&pinctrl_uart1_default>; | |
ec11ebcf | 386 | }; |
1643b316 SB |
387 | |
388 | &usb0 { | |
389 | status = "okay"; | |
390 | dr_mode = "host"; | |
391 | usb-phy = <&usb_phy0>; | |
0c79b9fe SB |
392 | pinctrl-names = "default"; |
393 | pinctrl-0 = <&pinctrl_usb0_default>; | |
1643b316 | 394 | }; |