Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * linux/arch/arm/kernel/ecard.c | |
3 | * | |
4 | * Copyright 1995-2001 Russell King | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License version 2 as | |
8 | * published by the Free Software Foundation. | |
9 | * | |
10 | * Find all installed expansion cards, and handle interrupts from them. | |
11 | * | |
12 | * Created from information from Acorns RiscOS3 PRMs | |
13 | * | |
14 | * 08-Dec-1996 RMK Added code for the 9'th expansion card - the ether | |
15 | * podule slot. | |
16 | * 06-May-1997 RMK Added blacklist for cards whose loader doesn't work. | |
17 | * 12-Sep-1997 RMK Created new handling of interrupt enables/disables | |
18 | * - cards can now register their own routine to control | |
19 | * interrupts (recommended). | |
20 | * 29-Sep-1997 RMK Expansion card interrupt hardware not being re-enabled | |
21 | * on reset from Linux. (Caused cards not to respond | |
22 | * under RiscOS without hard reset). | |
23 | * 15-Feb-1998 RMK Added DMA support | |
24 | * 12-Sep-1998 RMK Added EASI support | |
25 | * 10-Jan-1999 RMK Run loaders in a simulated RISC OS environment. | |
26 | * 17-Apr-1999 RMK Support for EASI Type C cycles. | |
27 | */ | |
28 | #define ECARD_C | |
29 | ||
1da177e4 LT |
30 | #include <linux/module.h> |
31 | #include <linux/kernel.h> | |
32 | #include <linux/types.h> | |
33 | #include <linux/sched.h> | |
34 | #include <linux/interrupt.h> | |
35 | #include <linux/completion.h> | |
36 | #include <linux/reboot.h> | |
37 | #include <linux/mm.h> | |
38 | #include <linux/slab.h> | |
39 | #include <linux/proc_fs.h> | |
40 | #include <linux/device.h> | |
41 | #include <linux/init.h> | |
00431707 | 42 | #include <linux/mutex.h> |
134c99e9 | 43 | #include <linux/kthread.h> |
10bdaaa0 | 44 | #include <linux/io.h> |
1da177e4 LT |
45 | |
46 | #include <asm/dma.h> | |
47 | #include <asm/ecard.h> | |
48 | #include <asm/hardware.h> | |
1da177e4 LT |
49 | #include <asm/irq.h> |
50 | #include <asm/mmu_context.h> | |
51 | #include <asm/mach/irq.h> | |
52 | #include <asm/tlbflush.h> | |
53 | ||
c0b04d1b RK |
54 | #include "ecard.h" |
55 | ||
1da177e4 LT |
56 | #ifndef CONFIG_ARCH_RPC |
57 | #define HAVE_EXPMASK | |
58 | #endif | |
59 | ||
60 | struct ecard_request { | |
61 | void (*fn)(struct ecard_request *); | |
62 | ecard_t *ec; | |
63 | unsigned int address; | |
64 | unsigned int length; | |
65 | unsigned int use_loader; | |
66 | void *buffer; | |
67 | struct completion *complete; | |
68 | }; | |
69 | ||
70 | struct expcard_blacklist { | |
71 | unsigned short manufacturer; | |
72 | unsigned short product; | |
73 | const char *type; | |
74 | }; | |
75 | ||
76 | static ecard_t *cards; | |
77 | static ecard_t *slot_to_expcard[MAX_ECARDS]; | |
78 | static unsigned int ectcr; | |
79 | #ifdef HAS_EXPMASK | |
80 | static unsigned int have_expmask; | |
81 | #endif | |
82 | ||
83 | /* List of descriptions of cards which don't have an extended | |
84 | * identification, or chunk directories containing a description. | |
85 | */ | |
86 | static struct expcard_blacklist __initdata blacklist[] = { | |
87 | { MANU_ACORN, PROD_ACORN_ETHER1, "Acorn Ether1" } | |
88 | }; | |
89 | ||
90 | asmlinkage extern int | |
91 | ecard_loader_reset(unsigned long base, loader_t loader); | |
92 | asmlinkage extern int | |
93 | ecard_loader_read(int off, unsigned long base, loader_t loader); | |
94 | ||
95 | static inline unsigned short ecard_getu16(unsigned char *v) | |
96 | { | |
97 | return v[0] | v[1] << 8; | |
98 | } | |
99 | ||
100 | static inline signed long ecard_gets24(unsigned char *v) | |
101 | { | |
102 | return v[0] | v[1] << 8 | v[2] << 16 | ((v[2] & 0x80) ? 0xff000000 : 0); | |
103 | } | |
104 | ||
105 | static inline ecard_t *slot_to_ecard(unsigned int slot) | |
106 | { | |
107 | return slot < MAX_ECARDS ? slot_to_expcard[slot] : NULL; | |
108 | } | |
109 | ||
110 | /* ===================== Expansion card daemon ======================== */ | |
111 | /* | |
112 | * Since the loader programs on the expansion cards need to be run | |
113 | * in a specific environment, create a separate task with this | |
114 | * environment up, and pass requests to this task as and when we | |
115 | * need to. | |
116 | * | |
117 | * This should allow 99% of loaders to be called from Linux. | |
118 | * | |
119 | * From a security standpoint, we trust the card vendors. This | |
120 | * may be a misplaced trust. | |
121 | */ | |
122 | static void ecard_task_reset(struct ecard_request *req) | |
123 | { | |
124 | struct expansion_card *ec = req->ec; | |
125 | struct resource *res; | |
126 | ||
127 | res = ec->slot_no == 8 | |
128 | ? &ec->resource[ECARD_RES_MEMC] | |
5559bca8 | 129 | : ec->easi |
1da177e4 LT |
130 | ? &ec->resource[ECARD_RES_EASI] |
131 | : &ec->resource[ECARD_RES_IOCSYNC]; | |
132 | ||
133 | ecard_loader_reset(res->start, ec->loader); | |
134 | } | |
135 | ||
136 | static void ecard_task_readbytes(struct ecard_request *req) | |
137 | { | |
138 | struct expansion_card *ec = req->ec; | |
139 | unsigned char *buf = req->buffer; | |
140 | unsigned int len = req->length; | |
141 | unsigned int off = req->address; | |
142 | ||
143 | if (ec->slot_no == 8) { | |
144 | void __iomem *base = (void __iomem *) | |
145 | ec->resource[ECARD_RES_MEMC].start; | |
146 | ||
147 | /* | |
148 | * The card maintains an index which increments the address | |
149 | * into a 4096-byte page on each access. We need to keep | |
150 | * track of the counter. | |
151 | */ | |
152 | static unsigned int index; | |
153 | unsigned int page; | |
154 | ||
155 | page = (off >> 12) * 4; | |
156 | if (page > 256 * 4) | |
157 | return; | |
158 | ||
159 | off &= 4095; | |
160 | ||
161 | /* | |
162 | * If we are reading offset 0, or our current index is | |
163 | * greater than the offset, reset the hardware index counter. | |
164 | */ | |
165 | if (off == 0 || index > off) { | |
166 | writeb(0, base); | |
167 | index = 0; | |
168 | } | |
169 | ||
170 | /* | |
171 | * Increment the hardware index counter until we get to the | |
172 | * required offset. The read bytes are discarded. | |
173 | */ | |
174 | while (index < off) { | |
175 | readb(base + page); | |
176 | index += 1; | |
177 | } | |
178 | ||
179 | while (len--) { | |
180 | *buf++ = readb(base + page); | |
181 | index += 1; | |
182 | } | |
183 | } else { | |
5559bca8 | 184 | unsigned long base = (ec->easi |
1da177e4 LT |
185 | ? &ec->resource[ECARD_RES_EASI] |
186 | : &ec->resource[ECARD_RES_IOCSYNC])->start; | |
187 | void __iomem *pbase = (void __iomem *)base; | |
188 | ||
189 | if (!req->use_loader || !ec->loader) { | |
190 | off *= 4; | |
191 | while (len--) { | |
192 | *buf++ = readb(pbase + off); | |
193 | off += 4; | |
194 | } | |
195 | } else { | |
196 | while(len--) { | |
197 | /* | |
198 | * The following is required by some | |
199 | * expansion card loader programs. | |
200 | */ | |
201 | *(unsigned long *)0x108 = 0; | |
202 | *buf++ = ecard_loader_read(off++, base, | |
203 | ec->loader); | |
204 | } | |
205 | } | |
206 | } | |
207 | ||
208 | } | |
209 | ||
210 | static DECLARE_WAIT_QUEUE_HEAD(ecard_wait); | |
211 | static struct ecard_request *ecard_req; | |
00431707 | 212 | static DEFINE_MUTEX(ecard_mutex); |
1da177e4 LT |
213 | |
214 | /* | |
215 | * Set up the expansion card daemon's page tables. | |
216 | */ | |
217 | static void ecard_init_pgtables(struct mm_struct *mm) | |
218 | { | |
219 | struct vm_area_struct vma; | |
220 | ||
221 | /* We want to set up the page tables for the following mapping: | |
222 | * Virtual Physical | |
223 | * 0x03000000 0x03000000 | |
224 | * 0x03010000 unmapped | |
225 | * 0x03210000 0x03210000 | |
226 | * 0x03400000 unmapped | |
227 | * 0x08000000 0x08000000 | |
228 | * 0x10000000 unmapped | |
229 | * | |
230 | * FIXME: we don't follow this 100% yet. | |
231 | */ | |
232 | pgd_t *src_pgd, *dst_pgd; | |
233 | ||
234 | src_pgd = pgd_offset(mm, (unsigned long)IO_BASE); | |
235 | dst_pgd = pgd_offset(mm, IO_START); | |
236 | ||
237 | memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (IO_SIZE / PGDIR_SIZE)); | |
238 | ||
239 | src_pgd = pgd_offset(mm, EASI_BASE); | |
240 | dst_pgd = pgd_offset(mm, EASI_START); | |
241 | ||
242 | memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE)); | |
243 | ||
244 | vma.vm_mm = mm; | |
245 | ||
246 | flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE); | |
247 | flush_tlb_range(&vma, EASI_START, EASI_START + EASI_SIZE); | |
248 | } | |
249 | ||
250 | static int ecard_init_mm(void) | |
251 | { | |
252 | struct mm_struct * mm = mm_alloc(); | |
253 | struct mm_struct *active_mm = current->active_mm; | |
254 | ||
255 | if (!mm) | |
256 | return -ENOMEM; | |
257 | ||
258 | current->mm = mm; | |
259 | current->active_mm = mm; | |
260 | activate_mm(active_mm, mm); | |
261 | mmdrop(active_mm); | |
262 | ecard_init_pgtables(mm); | |
263 | return 0; | |
264 | } | |
265 | ||
266 | static int | |
267 | ecard_task(void * unused) | |
268 | { | |
1da177e4 LT |
269 | /* |
270 | * Allocate a mm. We're not a lazy-TLB kernel task since we need | |
271 | * to set page table entries where the user space would be. Note | |
272 | * that this also creates the page tables. Failure is not an | |
273 | * option here. | |
274 | */ | |
275 | if (ecard_init_mm()) | |
276 | panic("kecardd: unable to alloc mm\n"); | |
277 | ||
278 | while (1) { | |
279 | struct ecard_request *req; | |
280 | ||
281 | wait_event_interruptible(ecard_wait, ecard_req != NULL); | |
282 | ||
283 | req = xchg(&ecard_req, NULL); | |
284 | if (req != NULL) { | |
285 | req->fn(req); | |
286 | complete(req->complete); | |
287 | } | |
288 | } | |
289 | } | |
290 | ||
291 | /* | |
292 | * Wake the expansion card daemon to action our request. | |
293 | * | |
294 | * FIXME: The test here is not sufficient to detect if the | |
295 | * kcardd is running. | |
296 | */ | |
297 | static void ecard_call(struct ecard_request *req) | |
298 | { | |
6e9a4738 | 299 | DECLARE_COMPLETION_ONSTACK(completion); |
1da177e4 LT |
300 | |
301 | req->complete = &completion; | |
302 | ||
00431707 | 303 | mutex_lock(&ecard_mutex); |
1da177e4 LT |
304 | ecard_req = req; |
305 | wake_up(&ecard_wait); | |
306 | ||
307 | /* | |
308 | * Now wait for kecardd to run. | |
309 | */ | |
310 | wait_for_completion(&completion); | |
00431707 | 311 | mutex_unlock(&ecard_mutex); |
1da177e4 LT |
312 | } |
313 | ||
314 | /* ======================= Mid-level card control ===================== */ | |
315 | ||
316 | static void | |
317 | ecard_readbytes(void *addr, ecard_t *ec, int off, int len, int useld) | |
318 | { | |
319 | struct ecard_request req; | |
320 | ||
321 | req.fn = ecard_task_readbytes; | |
322 | req.ec = ec; | |
323 | req.address = off; | |
324 | req.length = len; | |
325 | req.use_loader = useld; | |
326 | req.buffer = addr; | |
327 | ||
328 | ecard_call(&req); | |
329 | } | |
330 | ||
331 | int ecard_readchunk(struct in_chunk_dir *cd, ecard_t *ec, int id, int num) | |
332 | { | |
333 | struct ex_chunk_dir excd; | |
334 | int index = 16; | |
335 | int useld = 0; | |
336 | ||
337 | if (!ec->cid.cd) | |
338 | return 0; | |
339 | ||
340 | while(1) { | |
341 | ecard_readbytes(&excd, ec, index, 8, useld); | |
342 | index += 8; | |
343 | if (c_id(&excd) == 0) { | |
344 | if (!useld && ec->loader) { | |
345 | useld = 1; | |
346 | index = 0; | |
347 | continue; | |
348 | } | |
349 | return 0; | |
350 | } | |
351 | if (c_id(&excd) == 0xf0) { /* link */ | |
352 | index = c_start(&excd); | |
353 | continue; | |
354 | } | |
355 | if (c_id(&excd) == 0x80) { /* loader */ | |
356 | if (!ec->loader) { | |
5cbded58 | 357 | ec->loader = kmalloc(c_len(&excd), |
1da177e4 LT |
358 | GFP_KERNEL); |
359 | if (ec->loader) | |
360 | ecard_readbytes(ec->loader, ec, | |
361 | (int)c_start(&excd), | |
362 | c_len(&excd), useld); | |
363 | else | |
364 | return 0; | |
365 | } | |
366 | continue; | |
367 | } | |
368 | if (c_id(&excd) == id && num-- == 0) | |
369 | break; | |
370 | } | |
371 | ||
372 | if (c_id(&excd) & 0x80) { | |
373 | switch (c_id(&excd) & 0x70) { | |
374 | case 0x70: | |
375 | ecard_readbytes((unsigned char *)excd.d.string, ec, | |
376 | (int)c_start(&excd), c_len(&excd), | |
377 | useld); | |
378 | break; | |
379 | case 0x00: | |
380 | break; | |
381 | } | |
382 | } | |
383 | cd->start_offset = c_start(&excd); | |
384 | memcpy(cd->d.string, excd.d.string, 256); | |
385 | return 1; | |
386 | } | |
387 | ||
388 | /* ======================= Interrupt control ============================ */ | |
389 | ||
390 | static void ecard_def_irq_enable(ecard_t *ec, int irqnr) | |
391 | { | |
392 | #ifdef HAS_EXPMASK | |
393 | if (irqnr < 4 && have_expmask) { | |
394 | have_expmask |= 1 << irqnr; | |
395 | __raw_writeb(have_expmask, EXPMASK_ENABLE); | |
396 | } | |
397 | #endif | |
398 | } | |
399 | ||
400 | static void ecard_def_irq_disable(ecard_t *ec, int irqnr) | |
401 | { | |
402 | #ifdef HAS_EXPMASK | |
403 | if (irqnr < 4 && have_expmask) { | |
404 | have_expmask &= ~(1 << irqnr); | |
405 | __raw_writeb(have_expmask, EXPMASK_ENABLE); | |
406 | } | |
407 | #endif | |
408 | } | |
409 | ||
410 | static int ecard_def_irq_pending(ecard_t *ec) | |
411 | { | |
412 | return !ec->irqmask || readb(ec->irqaddr) & ec->irqmask; | |
413 | } | |
414 | ||
415 | static void ecard_def_fiq_enable(ecard_t *ec, int fiqnr) | |
416 | { | |
417 | panic("ecard_def_fiq_enable called - impossible"); | |
418 | } | |
419 | ||
420 | static void ecard_def_fiq_disable(ecard_t *ec, int fiqnr) | |
421 | { | |
422 | panic("ecard_def_fiq_disable called - impossible"); | |
423 | } | |
424 | ||
425 | static int ecard_def_fiq_pending(ecard_t *ec) | |
426 | { | |
427 | return !ec->fiqmask || readb(ec->fiqaddr) & ec->fiqmask; | |
428 | } | |
429 | ||
430 | static expansioncard_ops_t ecard_default_ops = { | |
431 | ecard_def_irq_enable, | |
432 | ecard_def_irq_disable, | |
433 | ecard_def_irq_pending, | |
434 | ecard_def_fiq_enable, | |
435 | ecard_def_fiq_disable, | |
436 | ecard_def_fiq_pending | |
437 | }; | |
438 | ||
439 | /* | |
440 | * Enable and disable interrupts from expansion cards. | |
441 | * (interrupts are disabled for these functions). | |
442 | * | |
443 | * They are not meant to be called directly, but via enable/disable_irq. | |
444 | */ | |
445 | static void ecard_irq_unmask(unsigned int irqnr) | |
446 | { | |
447 | ecard_t *ec = slot_to_ecard(irqnr - 32); | |
448 | ||
449 | if (ec) { | |
450 | if (!ec->ops) | |
451 | ec->ops = &ecard_default_ops; | |
452 | ||
453 | if (ec->claimed && ec->ops->irqenable) | |
454 | ec->ops->irqenable(ec, irqnr); | |
455 | else | |
456 | printk(KERN_ERR "ecard: rejecting request to " | |
457 | "enable IRQs for %d\n", irqnr); | |
458 | } | |
459 | } | |
460 | ||
461 | static void ecard_irq_mask(unsigned int irqnr) | |
462 | { | |
463 | ecard_t *ec = slot_to_ecard(irqnr - 32); | |
464 | ||
465 | if (ec) { | |
466 | if (!ec->ops) | |
467 | ec->ops = &ecard_default_ops; | |
468 | ||
469 | if (ec->ops && ec->ops->irqdisable) | |
470 | ec->ops->irqdisable(ec, irqnr); | |
471 | } | |
472 | } | |
473 | ||
38c677cb DB |
474 | static struct irq_chip ecard_chip = { |
475 | .name = "ECARD", | |
1da177e4 LT |
476 | .ack = ecard_irq_mask, |
477 | .mask = ecard_irq_mask, | |
478 | .unmask = ecard_irq_unmask, | |
479 | }; | |
480 | ||
481 | void ecard_enablefiq(unsigned int fiqnr) | |
482 | { | |
483 | ecard_t *ec = slot_to_ecard(fiqnr); | |
484 | ||
485 | if (ec) { | |
486 | if (!ec->ops) | |
487 | ec->ops = &ecard_default_ops; | |
488 | ||
489 | if (ec->claimed && ec->ops->fiqenable) | |
490 | ec->ops->fiqenable(ec, fiqnr); | |
491 | else | |
492 | printk(KERN_ERR "ecard: rejecting request to " | |
493 | "enable FIQs for %d\n", fiqnr); | |
494 | } | |
495 | } | |
496 | ||
497 | void ecard_disablefiq(unsigned int fiqnr) | |
498 | { | |
499 | ecard_t *ec = slot_to_ecard(fiqnr); | |
500 | ||
501 | if (ec) { | |
502 | if (!ec->ops) | |
503 | ec->ops = &ecard_default_ops; | |
504 | ||
505 | if (ec->ops->fiqdisable) | |
506 | ec->ops->fiqdisable(ec, fiqnr); | |
507 | } | |
508 | } | |
509 | ||
510 | static void ecard_dump_irq_state(void) | |
511 | { | |
512 | ecard_t *ec; | |
513 | ||
514 | printk("Expansion card IRQ state:\n"); | |
515 | ||
516 | for (ec = cards; ec; ec = ec->next) { | |
517 | if (ec->slot_no == 8) | |
518 | continue; | |
519 | ||
520 | printk(" %d: %sclaimed, ", | |
521 | ec->slot_no, ec->claimed ? "" : "not "); | |
522 | ||
523 | if (ec->ops && ec->ops->irqpending && | |
524 | ec->ops != &ecard_default_ops) | |
525 | printk("irq %spending\n", | |
526 | ec->ops->irqpending(ec) ? "" : "not "); | |
527 | else | |
528 | printk("irqaddr %p, mask = %02X, status = %02X\n", | |
529 | ec->irqaddr, ec->irqmask, readb(ec->irqaddr)); | |
530 | } | |
531 | } | |
532 | ||
10dd5ce2 | 533 | static void ecard_check_lockup(struct irq_desc *desc) |
1da177e4 LT |
534 | { |
535 | static unsigned long last; | |
536 | static int lockup; | |
537 | ||
538 | /* | |
539 | * If the timer interrupt has not run since the last million | |
540 | * unrecognised expansion card interrupts, then there is | |
541 | * something seriously wrong. Disable the expansion card | |
542 | * interrupts so at least we can continue. | |
543 | * | |
544 | * Maybe we ought to start a timer to re-enable them some time | |
545 | * later? | |
546 | */ | |
547 | if (last == jiffies) { | |
548 | lockup += 1; | |
549 | if (lockup > 1000000) { | |
550 | printk(KERN_ERR "\nInterrupt lockup detected - " | |
551 | "disabling all expansion card interrupts\n"); | |
552 | ||
553 | desc->chip->mask(IRQ_EXPANSIONCARD); | |
554 | ecard_dump_irq_state(); | |
555 | } | |
556 | } else | |
557 | lockup = 0; | |
558 | ||
559 | /* | |
560 | * If we did not recognise the source of this interrupt, | |
561 | * warn the user, but don't flood the user with these messages. | |
562 | */ | |
563 | if (!last || time_after(jiffies, last + 5*HZ)) { | |
564 | last = jiffies; | |
565 | printk(KERN_WARNING "Unrecognised interrupt from backplane\n"); | |
566 | ecard_dump_irq_state(); | |
567 | } | |
568 | } | |
569 | ||
570 | static void | |
10dd5ce2 | 571 | ecard_irq_handler(unsigned int irq, struct irq_desc *desc) |
1da177e4 LT |
572 | { |
573 | ecard_t *ec; | |
574 | int called = 0; | |
575 | ||
576 | desc->chip->mask(irq); | |
577 | for (ec = cards; ec; ec = ec->next) { | |
578 | int pending; | |
579 | ||
580 | if (!ec->claimed || ec->irq == NO_IRQ || ec->slot_no == 8) | |
581 | continue; | |
582 | ||
583 | if (ec->ops && ec->ops->irqpending) | |
584 | pending = ec->ops->irqpending(ec); | |
585 | else | |
586 | pending = ecard_default_ops.irqpending(ec); | |
587 | ||
588 | if (pending) { | |
10dd5ce2 | 589 | struct irq_desc *d = irq_desc + ec->irq; |
0cd61b68 | 590 | desc_handle_irq(ec->irq, d); |
1da177e4 LT |
591 | called ++; |
592 | } | |
593 | } | |
594 | desc->chip->unmask(irq); | |
595 | ||
596 | if (called == 0) | |
597 | ecard_check_lockup(desc); | |
598 | } | |
599 | ||
600 | #ifdef HAS_EXPMASK | |
601 | static unsigned char priority_masks[] = | |
602 | { | |
603 | 0xf0, 0xf1, 0xf3, 0xf7, 0xff, 0xff, 0xff, 0xff | |
604 | }; | |
605 | ||
606 | static unsigned char first_set[] = | |
607 | { | |
608 | 0x00, 0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00, | |
609 | 0x03, 0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00 | |
610 | }; | |
611 | ||
612 | static void | |
10dd5ce2 | 613 | ecard_irqexp_handler(unsigned int irq, struct irq_desc *desc) |
1da177e4 LT |
614 | { |
615 | const unsigned int statusmask = 15; | |
616 | unsigned int status; | |
617 | ||
618 | status = __raw_readb(EXPMASK_STATUS) & statusmask; | |
619 | if (status) { | |
620 | unsigned int slot = first_set[status]; | |
621 | ecard_t *ec = slot_to_ecard(slot); | |
622 | ||
623 | if (ec->claimed) { | |
33e39f1d | 624 | struct irq_desc *d = irq_desc + ec->irq; |
1da177e4 LT |
625 | /* |
626 | * this ugly code is so that we can operate a | |
627 | * prioritorising system: | |
628 | * | |
629 | * Card 0 highest priority | |
630 | * Card 1 | |
631 | * Card 2 | |
632 | * Card 3 lowest priority | |
633 | * | |
634 | * Serial cards should go in 0/1, ethernet/scsi in 2/3 | |
635 | * otherwise you will lose serial data at high speeds! | |
636 | */ | |
0cd61b68 | 637 | desc_handle_irq(ec->irq, d); |
1da177e4 LT |
638 | } else { |
639 | printk(KERN_WARNING "card%d: interrupt from unclaimed " | |
640 | "card???\n", slot); | |
641 | have_expmask &= ~(1 << slot); | |
642 | __raw_writeb(have_expmask, EXPMASK_ENABLE); | |
643 | } | |
644 | } else | |
645 | printk(KERN_WARNING "Wild interrupt from backplane (masks)\n"); | |
646 | } | |
647 | ||
648 | static int __init ecard_probeirqhw(void) | |
649 | { | |
650 | ecard_t *ec; | |
651 | int found; | |
652 | ||
653 | __raw_writeb(0x00, EXPMASK_ENABLE); | |
654 | __raw_writeb(0xff, EXPMASK_STATUS); | |
655 | found = (__raw_readb(EXPMASK_STATUS) & 15) == 0; | |
656 | __raw_writeb(0xff, EXPMASK_ENABLE); | |
657 | ||
658 | if (found) { | |
659 | printk(KERN_DEBUG "Expansion card interrupt " | |
660 | "management hardware found\n"); | |
661 | ||
662 | /* for each card present, set a bit to '1' */ | |
663 | have_expmask = 0x80000000; | |
664 | ||
665 | for (ec = cards; ec; ec = ec->next) | |
666 | have_expmask |= 1 << ec->slot_no; | |
667 | ||
668 | __raw_writeb(have_expmask, EXPMASK_ENABLE); | |
669 | } | |
670 | ||
671 | return found; | |
672 | } | |
673 | #else | |
674 | #define ecard_irqexp_handler NULL | |
675 | #define ecard_probeirqhw() (0) | |
676 | #endif | |
677 | ||
678 | #ifndef IO_EC_MEMC8_BASE | |
679 | #define IO_EC_MEMC8_BASE 0 | |
680 | #endif | |
681 | ||
682 | unsigned int __ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed) | |
683 | { | |
684 | unsigned long address = 0; | |
685 | int slot = ec->slot_no; | |
686 | ||
687 | if (ec->slot_no == 8) | |
688 | return IO_EC_MEMC8_BASE; | |
689 | ||
690 | ectcr &= ~(1 << slot); | |
691 | ||
692 | switch (type) { | |
693 | case ECARD_MEMC: | |
694 | if (slot < 4) | |
695 | address = IO_EC_MEMC_BASE + (slot << 12); | |
696 | break; | |
697 | ||
698 | case ECARD_IOC: | |
699 | if (slot < 4) | |
700 | address = IO_EC_IOC_BASE + (slot << 12); | |
701 | #ifdef IO_EC_IOC4_BASE | |
702 | else | |
703 | address = IO_EC_IOC4_BASE + ((slot - 4) << 12); | |
704 | #endif | |
705 | if (address) | |
706 | address += speed << 17; | |
707 | break; | |
708 | ||
709 | #ifdef IO_EC_EASI_BASE | |
710 | case ECARD_EASI: | |
711 | address = IO_EC_EASI_BASE + (slot << 22); | |
712 | if (speed == ECARD_FAST) | |
713 | ectcr |= 1 << slot; | |
714 | break; | |
715 | #endif | |
716 | default: | |
717 | break; | |
718 | } | |
719 | ||
720 | #ifdef IOMD_ECTCR | |
721 | iomd_writeb(ectcr, IOMD_ECTCR); | |
722 | #endif | |
723 | return address; | |
724 | } | |
725 | ||
726 | static int ecard_prints(char *buffer, ecard_t *ec) | |
727 | { | |
728 | char *start = buffer; | |
729 | ||
730 | buffer += sprintf(buffer, " %d: %s ", ec->slot_no, | |
5559bca8 | 731 | ec->easi ? "EASI" : " "); |
1da177e4 LT |
732 | |
733 | if (ec->cid.id == 0) { | |
734 | struct in_chunk_dir incd; | |
735 | ||
736 | buffer += sprintf(buffer, "[%04X:%04X] ", | |
737 | ec->cid.manufacturer, ec->cid.product); | |
738 | ||
739 | if (!ec->card_desc && ec->cid.cd && | |
740 | ecard_readchunk(&incd, ec, 0xf5, 0)) { | |
741 | ec->card_desc = kmalloc(strlen(incd.d.string)+1, GFP_KERNEL); | |
742 | ||
743 | if (ec->card_desc) | |
744 | strcpy((char *)ec->card_desc, incd.d.string); | |
745 | } | |
746 | ||
747 | buffer += sprintf(buffer, "%s\n", ec->card_desc ? ec->card_desc : "*unknown*"); | |
748 | } else | |
749 | buffer += sprintf(buffer, "Simple card %d\n", ec->cid.id); | |
750 | ||
751 | return buffer - start; | |
752 | } | |
753 | ||
754 | static int get_ecard_dev_info(char *buf, char **start, off_t pos, int count) | |
755 | { | |
756 | ecard_t *ec = cards; | |
757 | off_t at = 0; | |
758 | int len, cnt; | |
759 | ||
760 | cnt = 0; | |
761 | while (ec && count > cnt) { | |
762 | len = ecard_prints(buf, ec); | |
763 | at += len; | |
764 | if (at >= pos) { | |
765 | if (!*start) { | |
766 | *start = buf + (pos - (at - len)); | |
767 | cnt = at - pos; | |
768 | } else | |
769 | cnt += len; | |
770 | buf += len; | |
771 | } | |
772 | ec = ec->next; | |
773 | } | |
774 | return (count > cnt) ? cnt : count; | |
775 | } | |
776 | ||
777 | static struct proc_dir_entry *proc_bus_ecard_dir = NULL; | |
778 | ||
779 | static void ecard_proc_init(void) | |
780 | { | |
781 | proc_bus_ecard_dir = proc_mkdir("ecard", proc_bus); | |
782 | create_proc_info_entry("devices", 0, proc_bus_ecard_dir, | |
783 | get_ecard_dev_info); | |
784 | } | |
785 | ||
786 | #define ec_set_resource(ec,nr,st,sz) \ | |
787 | do { \ | |
788 | (ec)->resource[nr].name = ec->dev.bus_id; \ | |
789 | (ec)->resource[nr].start = st; \ | |
790 | (ec)->resource[nr].end = (st) + (sz) - 1; \ | |
791 | (ec)->resource[nr].flags = IORESOURCE_MEM; \ | |
792 | } while (0) | |
793 | ||
794 | static void __init ecard_free_card(struct expansion_card *ec) | |
795 | { | |
796 | int i; | |
797 | ||
798 | for (i = 0; i < ECARD_NUM_RESOURCES; i++) | |
799 | if (ec->resource[i].flags) | |
800 | release_resource(&ec->resource[i]); | |
801 | ||
802 | kfree(ec); | |
803 | } | |
804 | ||
805 | static struct expansion_card *__init ecard_alloc_card(int type, int slot) | |
806 | { | |
807 | struct expansion_card *ec; | |
808 | unsigned long base; | |
809 | int i; | |
810 | ||
d2a02b93 | 811 | ec = kzalloc(sizeof(ecard_t), GFP_KERNEL); |
1da177e4 LT |
812 | if (!ec) { |
813 | ec = ERR_PTR(-ENOMEM); | |
814 | goto nomem; | |
815 | } | |
816 | ||
1da177e4 | 817 | ec->slot_no = slot; |
5559bca8 | 818 | ec->easi = type == ECARD_EASI; |
1da177e4 LT |
819 | ec->irq = NO_IRQ; |
820 | ec->fiq = NO_IRQ; | |
821 | ec->dma = NO_DMA; | |
822 | ec->ops = &ecard_default_ops; | |
823 | ||
824 | snprintf(ec->dev.bus_id, sizeof(ec->dev.bus_id), "ecard%d", slot); | |
825 | ec->dev.parent = NULL; | |
826 | ec->dev.bus = &ecard_bus_type; | |
827 | ec->dev.dma_mask = &ec->dma_mask; | |
828 | ec->dma_mask = (u64)0xffffffff; | |
69f4f331 | 829 | ec->dev.coherent_dma_mask = ec->dma_mask; |
1da177e4 LT |
830 | |
831 | if (slot < 4) { | |
832 | ec_set_resource(ec, ECARD_RES_MEMC, | |
833 | PODSLOT_MEMC_BASE + (slot << 14), | |
834 | PODSLOT_MEMC_SIZE); | |
835 | base = PODSLOT_IOC0_BASE + (slot << 14); | |
836 | } else | |
837 | base = PODSLOT_IOC4_BASE + ((slot - 4) << 14); | |
838 | ||
839 | #ifdef CONFIG_ARCH_RPC | |
840 | if (slot < 8) { | |
841 | ec_set_resource(ec, ECARD_RES_EASI, | |
842 | PODSLOT_EASI_BASE + (slot << 24), | |
843 | PODSLOT_EASI_SIZE); | |
844 | } | |
845 | ||
846 | if (slot == 8) { | |
847 | ec_set_resource(ec, ECARD_RES_MEMC, NETSLOT_BASE, NETSLOT_SIZE); | |
848 | } else | |
849 | #endif | |
850 | ||
851 | for (i = 0; i <= ECARD_RES_IOCSYNC - ECARD_RES_IOCSLOW; i++) | |
852 | ec_set_resource(ec, i + ECARD_RES_IOCSLOW, | |
853 | base + (i << 19), PODSLOT_IOC_SIZE); | |
854 | ||
855 | for (i = 0; i < ECARD_NUM_RESOURCES; i++) { | |
856 | if (ec->resource[i].flags && | |
857 | request_resource(&iomem_resource, &ec->resource[i])) { | |
858 | printk(KERN_ERR "%s: resource(s) not available\n", | |
859 | ec->dev.bus_id); | |
860 | ec->resource[i].end -= ec->resource[i].start; | |
861 | ec->resource[i].start = 0; | |
862 | ec->resource[i].flags = 0; | |
863 | } | |
864 | } | |
865 | ||
866 | nomem: | |
867 | return ec; | |
868 | } | |
869 | ||
ff381d22 | 870 | static ssize_t ecard_show_irq(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
871 | { |
872 | struct expansion_card *ec = ECARD_DEV(dev); | |
873 | return sprintf(buf, "%u\n", ec->irq); | |
874 | } | |
875 | ||
ff381d22 | 876 | static ssize_t ecard_show_dma(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
877 | { |
878 | struct expansion_card *ec = ECARD_DEV(dev); | |
879 | return sprintf(buf, "%u\n", ec->dma); | |
880 | } | |
881 | ||
ff381d22 | 882 | static ssize_t ecard_show_resources(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
883 | { |
884 | struct expansion_card *ec = ECARD_DEV(dev); | |
885 | char *str = buf; | |
886 | int i; | |
887 | ||
888 | for (i = 0; i < ECARD_NUM_RESOURCES; i++) | |
c9e4143c | 889 | str += sprintf(str, "%08x %08x %08lx\n", |
1da177e4 LT |
890 | ec->resource[i].start, |
891 | ec->resource[i].end, | |
892 | ec->resource[i].flags); | |
893 | ||
894 | return str - buf; | |
895 | } | |
896 | ||
ff381d22 | 897 | static ssize_t ecard_show_vendor(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
898 | { |
899 | struct expansion_card *ec = ECARD_DEV(dev); | |
900 | return sprintf(buf, "%u\n", ec->cid.manufacturer); | |
901 | } | |
902 | ||
ff381d22 | 903 | static ssize_t ecard_show_device(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
904 | { |
905 | struct expansion_card *ec = ECARD_DEV(dev); | |
906 | return sprintf(buf, "%u\n", ec->cid.product); | |
907 | } | |
908 | ||
ff381d22 | 909 | static ssize_t ecard_show_type(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
910 | { |
911 | struct expansion_card *ec = ECARD_DEV(dev); | |
5559bca8 | 912 | return sprintf(buf, "%s\n", ec->easi ? "EASI" : "IOC"); |
1da177e4 LT |
913 | } |
914 | ||
915 | static struct device_attribute ecard_dev_attrs[] = { | |
916 | __ATTR(device, S_IRUGO, ecard_show_device, NULL), | |
917 | __ATTR(dma, S_IRUGO, ecard_show_dma, NULL), | |
918 | __ATTR(irq, S_IRUGO, ecard_show_irq, NULL), | |
919 | __ATTR(resource, S_IRUGO, ecard_show_resources, NULL), | |
920 | __ATTR(type, S_IRUGO, ecard_show_type, NULL), | |
921 | __ATTR(vendor, S_IRUGO, ecard_show_vendor, NULL), | |
922 | __ATTR_NULL, | |
923 | }; | |
924 | ||
925 | ||
926 | int ecard_request_resources(struct expansion_card *ec) | |
927 | { | |
928 | int i, err = 0; | |
929 | ||
930 | for (i = 0; i < ECARD_NUM_RESOURCES; i++) { | |
931 | if (ecard_resource_end(ec, i) && | |
932 | !request_mem_region(ecard_resource_start(ec, i), | |
933 | ecard_resource_len(ec, i), | |
934 | ec->dev.driver->name)) { | |
935 | err = -EBUSY; | |
936 | break; | |
937 | } | |
938 | } | |
939 | ||
940 | if (err) { | |
941 | while (i--) | |
942 | if (ecard_resource_end(ec, i)) | |
943 | release_mem_region(ecard_resource_start(ec, i), | |
944 | ecard_resource_len(ec, i)); | |
945 | } | |
946 | return err; | |
947 | } | |
948 | EXPORT_SYMBOL(ecard_request_resources); | |
949 | ||
950 | void ecard_release_resources(struct expansion_card *ec) | |
951 | { | |
952 | int i; | |
953 | ||
954 | for (i = 0; i < ECARD_NUM_RESOURCES; i++) | |
955 | if (ecard_resource_end(ec, i)) | |
956 | release_mem_region(ecard_resource_start(ec, i), | |
957 | ecard_resource_len(ec, i)); | |
958 | } | |
959 | EXPORT_SYMBOL(ecard_release_resources); | |
960 | ||
c7b87f3d RK |
961 | void ecard_setirq(struct expansion_card *ec, const struct expansion_card_ops *ops, void *irq_data) |
962 | { | |
963 | ec->irq_data = irq_data; | |
964 | barrier(); | |
965 | ec->ops = ops; | |
966 | } | |
967 | EXPORT_SYMBOL(ecard_setirq); | |
968 | ||
10bdaaa0 RK |
969 | void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res, |
970 | unsigned long offset, unsigned long maxsize) | |
971 | { | |
972 | unsigned long start = ecard_resource_start(ec, res); | |
973 | unsigned long end = ecard_resource_end(ec, res); | |
974 | ||
975 | if (offset > (end - start)) | |
976 | return NULL; | |
977 | ||
978 | start += offset; | |
979 | if (maxsize && end - start > maxsize) | |
980 | end = start + maxsize; | |
981 | ||
982 | return devm_ioremap(&ec->dev, start, end - start); | |
983 | } | |
984 | EXPORT_SYMBOL(ecardm_iomap); | |
985 | ||
1da177e4 LT |
986 | /* |
987 | * Probe for an expansion card. | |
988 | * | |
989 | * If bit 1 of the first byte of the card is set, then the | |
990 | * card does not exist. | |
991 | */ | |
992 | static int __init | |
993 | ecard_probe(int slot, card_type_t type) | |
994 | { | |
995 | ecard_t **ecp; | |
996 | ecard_t *ec; | |
997 | struct ex_ecid cid; | |
998 | int i, rc; | |
999 | ||
1000 | ec = ecard_alloc_card(type, slot); | |
1001 | if (IS_ERR(ec)) { | |
1002 | rc = PTR_ERR(ec); | |
1003 | goto nomem; | |
1004 | } | |
1005 | ||
1006 | rc = -ENODEV; | |
1007 | if ((ec->podaddr = ecard_address(ec, type, ECARD_SYNC)) == 0) | |
1008 | goto nodev; | |
1009 | ||
1010 | cid.r_zero = 1; | |
1011 | ecard_readbytes(&cid, ec, 0, 16, 0); | |
1012 | if (cid.r_zero) | |
1013 | goto nodev; | |
1014 | ||
1015 | ec->cid.id = cid.r_id; | |
1016 | ec->cid.cd = cid.r_cd; | |
1017 | ec->cid.is = cid.r_is; | |
1018 | ec->cid.w = cid.r_w; | |
1019 | ec->cid.manufacturer = ecard_getu16(cid.r_manu); | |
1020 | ec->cid.product = ecard_getu16(cid.r_prod); | |
1021 | ec->cid.country = cid.r_country; | |
1022 | ec->cid.irqmask = cid.r_irqmask; | |
1023 | ec->cid.irqoff = ecard_gets24(cid.r_irqoff); | |
1024 | ec->cid.fiqmask = cid.r_fiqmask; | |
1025 | ec->cid.fiqoff = ecard_gets24(cid.r_fiqoff); | |
1026 | ec->fiqaddr = | |
1027 | ec->irqaddr = (void __iomem *)ioaddr(ec->podaddr); | |
1028 | ||
1029 | if (ec->cid.is) { | |
1030 | ec->irqmask = ec->cid.irqmask; | |
1031 | ec->irqaddr += ec->cid.irqoff; | |
1032 | ec->fiqmask = ec->cid.fiqmask; | |
1033 | ec->fiqaddr += ec->cid.fiqoff; | |
1034 | } else { | |
1035 | ec->irqmask = 1; | |
1036 | ec->fiqmask = 4; | |
1037 | } | |
1038 | ||
eeea82ff | 1039 | for (i = 0; i < ARRAY_SIZE(blacklist); i++) |
1da177e4 LT |
1040 | if (blacklist[i].manufacturer == ec->cid.manufacturer && |
1041 | blacklist[i].product == ec->cid.product) { | |
1042 | ec->card_desc = blacklist[i].type; | |
1043 | break; | |
1044 | } | |
1045 | ||
1046 | /* | |
1047 | * hook the interrupt handlers | |
1048 | */ | |
1049 | if (slot < 8) { | |
1050 | ec->irq = 32 + slot; | |
1051 | set_irq_chip(ec->irq, &ecard_chip); | |
10dd5ce2 | 1052 | set_irq_handler(ec->irq, handle_level_irq); |
1da177e4 LT |
1053 | set_irq_flags(ec->irq, IRQF_VALID); |
1054 | } | |
1055 | ||
1056 | #ifdef IO_EC_MEMC8_BASE | |
1057 | if (slot == 8) | |
1058 | ec->irq = 11; | |
1059 | #endif | |
1060 | #ifdef CONFIG_ARCH_RPC | |
1061 | /* On RiscPC, only first two slots have DMA capability */ | |
1062 | if (slot < 2) | |
1063 | ec->dma = 2 + slot; | |
1064 | #endif | |
1065 | ||
1066 | for (ecp = &cards; *ecp; ecp = &(*ecp)->next); | |
1067 | ||
1068 | *ecp = ec; | |
1069 | slot_to_expcard[slot] = ec; | |
1070 | ||
1071 | device_register(&ec->dev); | |
1072 | ||
1073 | return 0; | |
1074 | ||
1075 | nodev: | |
1076 | ecard_free_card(ec); | |
1077 | nomem: | |
1078 | return rc; | |
1079 | } | |
1080 | ||
1081 | /* | |
1082 | * Initialise the expansion card system. | |
1083 | * Locate all hardware - interrupt management and | |
1084 | * actual cards. | |
1085 | */ | |
1086 | static int __init ecard_init(void) | |
1087 | { | |
134c99e9 EB |
1088 | struct task_struct *task; |
1089 | int slot, irqhw; | |
1da177e4 | 1090 | |
134c99e9 EB |
1091 | task = kthread_run(ecard_task, NULL, "kecardd"); |
1092 | if (IS_ERR(task)) { | |
e6aeb47d | 1093 | printk(KERN_ERR "Ecard: unable to create kernel thread: %ld\n", |
134c99e9 EB |
1094 | PTR_ERR(task)); |
1095 | return PTR_ERR(task); | |
1da177e4 LT |
1096 | } |
1097 | ||
1098 | printk("Probing expansion cards\n"); | |
1099 | ||
1100 | for (slot = 0; slot < 8; slot ++) { | |
1101 | if (ecard_probe(slot, ECARD_EASI) == -ENODEV) | |
1102 | ecard_probe(slot, ECARD_IOC); | |
1103 | } | |
1104 | ||
1105 | #ifdef IO_EC_MEMC8_BASE | |
1106 | ecard_probe(8, ECARD_IOC); | |
1107 | #endif | |
1108 | ||
1109 | irqhw = ecard_probeirqhw(); | |
1110 | ||
1111 | set_irq_chained_handler(IRQ_EXPANSIONCARD, | |
1112 | irqhw ? ecard_irqexp_handler : ecard_irq_handler); | |
1113 | ||
1114 | ecard_proc_init(); | |
1115 | ||
1116 | return 0; | |
1117 | } | |
1118 | ||
1119 | subsys_initcall(ecard_init); | |
1120 | ||
1121 | /* | |
1122 | * ECARD "bus" | |
1123 | */ | |
1124 | static const struct ecard_id * | |
1125 | ecard_match_device(const struct ecard_id *ids, struct expansion_card *ec) | |
1126 | { | |
1127 | int i; | |
1128 | ||
1129 | for (i = 0; ids[i].manufacturer != 65535; i++) | |
1130 | if (ec->cid.manufacturer == ids[i].manufacturer && | |
1131 | ec->cid.product == ids[i].product) | |
1132 | return ids + i; | |
1133 | ||
1134 | return NULL; | |
1135 | } | |
1136 | ||
1137 | static int ecard_drv_probe(struct device *dev) | |
1138 | { | |
1139 | struct expansion_card *ec = ECARD_DEV(dev); | |
1140 | struct ecard_driver *drv = ECARD_DRV(dev->driver); | |
1141 | const struct ecard_id *id; | |
1142 | int ret; | |
1143 | ||
1144 | id = ecard_match_device(drv->id_table, ec); | |
1145 | ||
1146 | ecard_claim(ec); | |
1147 | ret = drv->probe(ec, id); | |
1148 | if (ret) | |
1149 | ecard_release(ec); | |
1150 | return ret; | |
1151 | } | |
1152 | ||
1153 | static int ecard_drv_remove(struct device *dev) | |
1154 | { | |
1155 | struct expansion_card *ec = ECARD_DEV(dev); | |
1156 | struct ecard_driver *drv = ECARD_DRV(dev->driver); | |
1157 | ||
1158 | drv->remove(ec); | |
1159 | ecard_release(ec); | |
1160 | ||
c7b87f3d RK |
1161 | /* |
1162 | * Restore the default operations. We ensure that the | |
1163 | * ops are set before we change the data. | |
1164 | */ | |
1165 | ec->ops = &ecard_default_ops; | |
1166 | barrier(); | |
1167 | ec->irq_data = NULL; | |
1168 | ||
1da177e4 LT |
1169 | return 0; |
1170 | } | |
1171 | ||
1172 | /* | |
1173 | * Before rebooting, we must make sure that the expansion card is in a | |
1174 | * sensible state, so it can be re-detected. This means that the first | |
1175 | * page of the ROM must be visible. We call the expansion cards reset | |
1176 | * handler, if any. | |
1177 | */ | |
1178 | static void ecard_drv_shutdown(struct device *dev) | |
1179 | { | |
1180 | struct expansion_card *ec = ECARD_DEV(dev); | |
1181 | struct ecard_driver *drv = ECARD_DRV(dev->driver); | |
1182 | struct ecard_request req; | |
1183 | ||
e08b7541 RK |
1184 | if (dev->driver) { |
1185 | if (drv->shutdown) | |
1186 | drv->shutdown(ec); | |
1187 | ecard_release(ec); | |
1188 | } | |
1da177e4 LT |
1189 | |
1190 | /* | |
1191 | * If this card has a loader, call the reset handler. | |
1192 | */ | |
1193 | if (ec->loader) { | |
1194 | req.fn = ecard_task_reset; | |
1195 | req.ec = ec; | |
1196 | ecard_call(&req); | |
1197 | } | |
1198 | } | |
1199 | ||
1200 | int ecard_register_driver(struct ecard_driver *drv) | |
1201 | { | |
1202 | drv->drv.bus = &ecard_bus_type; | |
1da177e4 LT |
1203 | |
1204 | return driver_register(&drv->drv); | |
1205 | } | |
1206 | ||
1207 | void ecard_remove_driver(struct ecard_driver *drv) | |
1208 | { | |
1209 | driver_unregister(&drv->drv); | |
1210 | } | |
1211 | ||
1212 | static int ecard_match(struct device *_dev, struct device_driver *_drv) | |
1213 | { | |
1214 | struct expansion_card *ec = ECARD_DEV(_dev); | |
1215 | struct ecard_driver *drv = ECARD_DRV(_drv); | |
1216 | int ret; | |
1217 | ||
1218 | if (drv->id_table) { | |
1219 | ret = ecard_match_device(drv->id_table, ec) != NULL; | |
1220 | } else { | |
1221 | ret = ec->cid.id == drv->id; | |
1222 | } | |
1223 | ||
1224 | return ret; | |
1225 | } | |
1226 | ||
1227 | struct bus_type ecard_bus_type = { | |
1228 | .name = "ecard", | |
1229 | .dev_attrs = ecard_dev_attrs, | |
1230 | .match = ecard_match, | |
e08b7541 RK |
1231 | .probe = ecard_drv_probe, |
1232 | .remove = ecard_drv_remove, | |
1233 | .shutdown = ecard_drv_shutdown, | |
1da177e4 LT |
1234 | }; |
1235 | ||
1236 | static int ecard_bus_init(void) | |
1237 | { | |
1238 | return bus_register(&ecard_bus_type); | |
1239 | } | |
1240 | ||
1241 | postcore_initcall(ecard_bus_init); | |
1242 | ||
1243 | EXPORT_SYMBOL(ecard_readchunk); | |
1244 | EXPORT_SYMBOL(__ecard_address); | |
1245 | EXPORT_SYMBOL(ecard_register_driver); | |
1246 | EXPORT_SYMBOL(ecard_remove_driver); | |
1247 | EXPORT_SYMBOL(ecard_bus_type); |