Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * linux/arch/arm/kernel/head.S | |
3 | * | |
4 | * Copyright (C) 1994-2002 Russell King | |
e65f38ed RK |
5 | * Copyright (c) 2003 ARM Limited |
6 | * All Rights Reserved | |
1da177e4 LT |
7 | * |
8 | * This program is free software; you can redistribute it and/or modify | |
9 | * it under the terms of the GNU General Public License version 2 as | |
10 | * published by the Free Software Foundation. | |
11 | * | |
12 | * Kernel startup code for all 32-bit CPUs | |
13 | */ | |
1da177e4 LT |
14 | #include <linux/linkage.h> |
15 | #include <linux/init.h> | |
16 | ||
17 | #include <asm/assembler.h> | |
195864cf | 18 | #include <asm/cp15.h> |
1da177e4 | 19 | #include <asm/domain.h> |
1da177e4 | 20 | #include <asm/ptrace.h> |
e6ae744d | 21 | #include <asm/asm-offsets.h> |
f09b9979 | 22 | #include <asm/memory.h> |
4f7a1812 | 23 | #include <asm/thread_info.h> |
e73fc88e | 24 | #include <asm/pgtable.h> |
1da177e4 | 25 | |
91a9fec0 RH |
26 | #if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_SEMIHOSTING) |
27 | #include CONFIG_DEBUG_LL_INCLUDE | |
c293393f JK |
28 | #endif |
29 | ||
1da177e4 | 30 | /* |
37d07b72 | 31 | * swapper_pg_dir is the virtual address of the initial page table. |
f06b97ff RK |
32 | * We place the page tables 16K below KERNEL_RAM_VADDR. Therefore, we must |
33 | * make sure that KERNEL_RAM_VADDR is correctly set. Currently, we expect | |
37d07b72 | 34 | * the least significant 16 bits to be 0x8000, but we could probably |
f06b97ff | 35 | * relax this restriction to KERNEL_RAM_VADDR >= PAGE_OFFSET + 0x4000. |
1da177e4 | 36 | */ |
72a20e22 | 37 | #define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET) |
f06b97ff RK |
38 | #if (KERNEL_RAM_VADDR & 0xffff) != 0x8000 |
39 | #error KERNEL_RAM_VADDR must start at 0xXXXX8000 | |
1da177e4 LT |
40 | #endif |
41 | ||
1b6ba46b CM |
42 | #ifdef CONFIG_ARM_LPAE |
43 | /* LPAE requires an additional page for the PGD */ | |
44 | #define PG_DIR_SIZE 0x5000 | |
45 | #define PMD_ORDER 3 | |
46 | #else | |
e73fc88e CM |
47 | #define PG_DIR_SIZE 0x4000 |
48 | #define PMD_ORDER 2 | |
1b6ba46b | 49 | #endif |
e73fc88e | 50 | |
1da177e4 | 51 | .globl swapper_pg_dir |
e73fc88e | 52 | .equ swapper_pg_dir, KERNEL_RAM_VADDR - PG_DIR_SIZE |
1da177e4 | 53 | |
72a20e22 | 54 | .macro pgtbl, rd, phys |
e73fc88e | 55 | add \rd, \phys, #TEXT_OFFSET - PG_DIR_SIZE |
1da177e4 | 56 | .endm |
1da177e4 | 57 | |
1da177e4 LT |
58 | /* |
59 | * Kernel startup entry point. | |
60 | * --------------------------- | |
61 | * | |
62 | * This is normally called from the decompressor code. The requirements | |
63 | * are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0, | |
4c2896e8 | 64 | * r1 = machine nr, r2 = atags or dtb pointer. |
1da177e4 LT |
65 | * |
66 | * This code is mostly position independent, so if you link the kernel at | |
67 | * 0xc0008000, you call this at __pa(0xc0008000). | |
68 | * | |
69 | * See linux/arch/arm/tools/mach-types for the complete list of machine | |
70 | * numbers for r1. | |
71 | * | |
72 | * We're trying to keep crap to a minimum; DO NOT add any machine specific | |
73 | * crap here - that's what the boot loader (or in extreme, well justified | |
74 | * circumstances, zImage) is for. | |
75 | */ | |
540b5738 DM |
76 | .arm |
77 | ||
2abc1c50 | 78 | __HEAD |
1da177e4 | 79 | ENTRY(stext) |
540b5738 DM |
80 | |
81 | THUMB( adr r9, BSYM(1f) ) @ Kernel is always entered in ARM. | |
82 | THUMB( bx r9 ) @ If this is a Thumb-2 kernel, | |
83 | THUMB( .thumb ) @ switch to Thumb now. | |
84 | THUMB(1: ) | |
85 | ||
80c59daf DM |
86 | #ifdef CONFIG_ARM_VIRT_EXT |
87 | bl __hyp_stub_install | |
88 | #endif | |
89 | @ ensure svc mode and all interrupts masked | |
90 | safe_svcmode_maskall r9 | |
91 | ||
0f44ba1d | 92 | mrc p15, 0, r9, c0, c0 @ get processor id |
1da177e4 LT |
93 | bl __lookup_processor_type @ r5=procinfo r9=cpuid |
94 | movs r10, r5 @ invalid processor (r5=0)? | |
a75e5248 | 95 | THUMB( it eq ) @ force fixup-able long branch encoding |
3c0bdac3 | 96 | beq __error_p @ yes, error 'p' |
0eb0511d | 97 | |
294064f5 CM |
98 | #ifdef CONFIG_ARM_LPAE |
99 | mrc p15, 0, r3, c0, c1, 4 @ read ID_MMFR0 | |
100 | and r3, r3, #0xf @ extract VMSA support | |
101 | cmp r3, #5 @ long-descriptor translation table format? | |
102 | THUMB( it lo ) @ force fixup-able long branch encoding | |
103 | blo __error_p @ only classic page table format | |
104 | #endif | |
105 | ||
72a20e22 RK |
106 | #ifndef CONFIG_XIP_KERNEL |
107 | adr r3, 2f | |
108 | ldmia r3, {r4, r8} | |
109 | sub r4, r3, r4 @ (PHYS_OFFSET - PAGE_OFFSET) | |
110 | add r8, r8, r4 @ PHYS_OFFSET | |
111 | #else | |
1b9f95f8 | 112 | ldr r8, =PHYS_OFFSET @ always constant in this case |
72a20e22 RK |
113 | #endif |
114 | ||
0eb0511d | 115 | /* |
4c2896e8 | 116 | * r1 = machine no, r2 = atags or dtb, |
72a20e22 | 117 | * r8 = phys_offset, r9 = cpuid, r10 = procinfo |
0eb0511d | 118 | */ |
9d20fdd5 | 119 | bl __vet_atags |
f00ec48f RK |
120 | #ifdef CONFIG_SMP_ON_UP |
121 | bl __fixup_smp | |
dc21af99 RK |
122 | #endif |
123 | #ifdef CONFIG_ARM_PATCH_PHYS_VIRT | |
124 | bl __fixup_pv_table | |
f00ec48f | 125 | #endif |
1da177e4 LT |
126 | bl __create_page_tables |
127 | ||
128 | /* | |
129 | * The following calls CPU specific code in a position independent | |
130 | * manner. See arch/arm/mm/proc-*.S for details. r10 = base of | |
6fc31d54 | 131 | * xxx_proc_info structure selected by __lookup_processor_type |
1da177e4 LT |
132 | * above. On return, the CPU will be ready for the MMU to be |
133 | * turned on, and r0 will hold the CPU control register value. | |
134 | */ | |
a4ae4134 | 135 | ldr r13, =__mmap_switched @ address to jump to after |
1da177e4 | 136 | @ mmu has been enabled |
00945010 | 137 | adr lr, BSYM(1f) @ return (PIC) address |
d427958a | 138 | mov r8, r4 @ set TTBR1 to swapper_pg_dir |
b86040a5 CM |
139 | ARM( add pc, r10, #PROCINFO_INITFUNC ) |
140 | THUMB( add r12, r10, #PROCINFO_INITFUNC ) | |
141 | THUMB( mov pc, r12 ) | |
00945010 | 142 | 1: b __enable_mmu |
93ed3970 | 143 | ENDPROC(stext) |
a4ae4134 | 144 | .ltorg |
72a20e22 RK |
145 | #ifndef CONFIG_XIP_KERNEL |
146 | 2: .long . | |
147 | .long PAGE_OFFSET | |
148 | #endif | |
1da177e4 LT |
149 | |
150 | /* | |
151 | * Setup the initial page tables. We only setup the barest | |
152 | * amount which are required to get the kernel running, which | |
153 | * generally means mapping in the kernel code. | |
154 | * | |
72a20e22 | 155 | * r8 = phys_offset, r9 = cpuid, r10 = procinfo |
1da177e4 LT |
156 | * |
157 | * Returns: | |
786f1b73 | 158 | * r0, r3, r5-r7 corrupted |
4756dcbf | 159 | * r4 = page table (see ARCH_PGD_SHIFT in asm/memory.h) |
1da177e4 | 160 | */ |
1da177e4 | 161 | __create_page_tables: |
72a20e22 | 162 | pgtbl r4, r8 @ page table address |
1da177e4 LT |
163 | |
164 | /* | |
e73fc88e | 165 | * Clear the swapper page table |
1da177e4 LT |
166 | */ |
167 | mov r0, r4 | |
168 | mov r3, #0 | |
e73fc88e | 169 | add r6, r0, #PG_DIR_SIZE |
1da177e4 LT |
170 | 1: str r3, [r0], #4 |
171 | str r3, [r0], #4 | |
172 | str r3, [r0], #4 | |
173 | str r3, [r0], #4 | |
174 | teq r0, r6 | |
175 | bne 1b | |
176 | ||
1b6ba46b CM |
177 | #ifdef CONFIG_ARM_LPAE |
178 | /* | |
179 | * Build the PGD table (first level) to point to the PMD table. A PGD | |
180 | * entry is 64-bit wide. | |
181 | */ | |
182 | mov r0, r4 | |
183 | add r3, r4, #0x1000 @ first PMD table address | |
184 | orr r3, r3, #3 @ PGD block type | |
185 | mov r6, #4 @ PTRS_PER_PGD | |
186 | mov r7, #1 << (55 - 32) @ L_PGD_SWAPPER | |
d61947a1 WD |
187 | 1: |
188 | #ifdef CONFIG_CPU_ENDIAN_BE8 | |
1b6ba46b | 189 | str r7, [r0], #4 @ set top PGD entry bits |
d61947a1 WD |
190 | str r3, [r0], #4 @ set bottom PGD entry bits |
191 | #else | |
192 | str r3, [r0], #4 @ set bottom PGD entry bits | |
193 | str r7, [r0], #4 @ set top PGD entry bits | |
194 | #endif | |
1b6ba46b CM |
195 | add r3, r3, #0x1000 @ next PMD table |
196 | subs r6, r6, #1 | |
197 | bne 1b | |
198 | ||
199 | add r4, r4, #0x1000 @ point to the PMD tables | |
d61947a1 WD |
200 | #ifdef CONFIG_CPU_ENDIAN_BE8 |
201 | add r4, r4, #4 @ we only write the bottom word | |
202 | #endif | |
1b6ba46b CM |
203 | #endif |
204 | ||
8799ee9f | 205 | ldr r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags |
1da177e4 LT |
206 | |
207 | /* | |
786f1b73 RK |
208 | * Create identity mapping to cater for __enable_mmu. |
209 | * This identity mapping will be removed by paging_init(). | |
1da177e4 | 210 | */ |
72662e01 | 211 | adr r0, __turn_mmu_on_loc |
786f1b73 RK |
212 | ldmia r0, {r3, r5, r6} |
213 | sub r0, r0, r3 @ virt->phys offset | |
72662e01 WD |
214 | add r5, r5, r0 @ phys __turn_mmu_on |
215 | add r6, r6, r0 @ phys __turn_mmu_on_end | |
e73fc88e CM |
216 | mov r5, r5, lsr #SECTION_SHIFT |
217 | mov r6, r6, lsr #SECTION_SHIFT | |
786f1b73 | 218 | |
e73fc88e CM |
219 | 1: orr r3, r7, r5, lsl #SECTION_SHIFT @ flags + kernel base |
220 | str r3, [r4, r5, lsl #PMD_ORDER] @ identity mapping | |
221 | cmp r5, r6 | |
222 | addlo r5, r5, #1 @ next section | |
223 | blo 1b | |
1da177e4 LT |
224 | |
225 | /* | |
9fa16b77 | 226 | * Map our RAM from the start to the end of the kernel .bss section. |
1da177e4 | 227 | */ |
9fa16b77 NP |
228 | add r0, r4, #PAGE_OFFSET >> (SECTION_SHIFT - PMD_ORDER) |
229 | ldr r6, =(_end - 1) | |
230 | orr r3, r8, r7 | |
e73fc88e | 231 | add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER) |
9fa16b77 | 232 | 1: str r3, [r0], #1 << PMD_ORDER |
e73fc88e | 233 | add r3, r3, #1 << SECTION_SHIFT |
9fa16b77 | 234 | cmp r0, r6 |
e98ff7f6 | 235 | bls 1b |
1da177e4 | 236 | |
ec3622d9 NP |
237 | #ifdef CONFIG_XIP_KERNEL |
238 | /* | |
9fa16b77 | 239 | * Map the kernel image separately as it is not located in RAM. |
ec3622d9 | 240 | */ |
9fa16b77 NP |
241 | #define XIP_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR) |
242 | mov r3, pc | |
243 | mov r3, r3, lsr #SECTION_SHIFT | |
244 | orr r3, r7, r3, lsl #SECTION_SHIFT | |
245 | add r0, r4, #(XIP_START & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER) | |
246 | str r3, [r0, #((XIP_START & 0x00f00000) >> SECTION_SHIFT) << PMD_ORDER]! | |
247 | ldr r6, =(_edata_loc - 1) | |
248 | add r0, r0, #1 << PMD_ORDER | |
e73fc88e | 249 | add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER) |
ec3622d9 | 250 | 1: cmp r0, r6 |
9fa16b77 NP |
251 | add r3, r3, #1 << SECTION_SHIFT |
252 | strls r3, [r0], #1 << PMD_ORDER | |
ec3622d9 NP |
253 | bls 1b |
254 | #endif | |
255 | ||
1da177e4 | 256 | /* |
9fa16b77 | 257 | * Then map boot params address in r2 if specified. |
6f16f499 | 258 | * We map 2 sections in case the ATAGs/DTB crosses a section boundary. |
1da177e4 | 259 | */ |
e73fc88e CM |
260 | mov r0, r2, lsr #SECTION_SHIFT |
261 | movs r0, r0, lsl #SECTION_SHIFT | |
9fa16b77 NP |
262 | subne r3, r0, r8 |
263 | addne r3, r3, #PAGE_OFFSET | |
264 | addne r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER) | |
265 | orrne r6, r7, r0 | |
6f16f499 NP |
266 | strne r6, [r3], #1 << PMD_ORDER |
267 | addne r6, r6, #1 << SECTION_SHIFT | |
9fa16b77 | 268 | strne r6, [r3] |
1da177e4 | 269 | |
4e1db26a | 270 | #if defined(CONFIG_ARM_LPAE) && defined(CONFIG_CPU_ENDIAN_BE8) |
d61947a1 WD |
271 | sub r4, r4, #4 @ Fixup page table pointer |
272 | @ for 64-bit descriptors | |
273 | #endif | |
274 | ||
c77b0427 | 275 | #ifdef CONFIG_DEBUG_LL |
9b5a146a | 276 | #if !defined(CONFIG_DEBUG_ICEDCC) && !defined(CONFIG_DEBUG_SEMIHOSTING) |
1da177e4 LT |
277 | /* |
278 | * Map in IO space for serial debugging. | |
279 | * This allows debug messages to be output | |
280 | * via a serial console before paging_init. | |
281 | */ | |
639da5ee | 282 | addruart r7, r3, r0 |
c293393f | 283 | |
e73fc88e CM |
284 | mov r3, r3, lsr #SECTION_SHIFT |
285 | mov r3, r3, lsl #PMD_ORDER | |
c293393f | 286 | |
1da177e4 | 287 | add r0, r4, r3 |
e73fc88e | 288 | mov r3, r7, lsr #SECTION_SHIFT |
c293393f | 289 | ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags |
e73fc88e | 290 | orr r3, r7, r3, lsl #SECTION_SHIFT |
1b6ba46b CM |
291 | #ifdef CONFIG_ARM_LPAE |
292 | mov r7, #1 << (54 - 32) @ XN | |
d61947a1 WD |
293 | #ifdef CONFIG_CPU_ENDIAN_BE8 |
294 | str r7, [r0], #4 | |
295 | str r3, [r0], #4 | |
1b6ba46b | 296 | #else |
f67860a7 | 297 | str r3, [r0], #4 |
1b6ba46b CM |
298 | str r7, [r0], #4 |
299 | #endif | |
d61947a1 WD |
300 | #else |
301 | orr r3, r3, #PMD_SECT_XN | |
302 | str r3, [r0], #4 | |
303 | #endif | |
c293393f | 304 | |
9b5a146a NP |
305 | #else /* CONFIG_DEBUG_ICEDCC || CONFIG_DEBUG_SEMIHOSTING */ |
306 | /* we don't need any serial debugging mappings */ | |
c293393f | 307 | ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags |
9b5a146a | 308 | #endif |
c293393f | 309 | |
1da177e4 LT |
310 | #if defined(CONFIG_ARCH_NETWINDER) || defined(CONFIG_ARCH_CATS) |
311 | /* | |
3c0bdac3 RK |
312 | * If we're using the NetWinder or CATS, we also need to map |
313 | * in the 16550-type serial port for the debug messages | |
1da177e4 | 314 | */ |
e73fc88e | 315 | add r0, r4, #0xff000000 >> (SECTION_SHIFT - PMD_ORDER) |
c77b0427 RK |
316 | orr r3, r7, #0x7c000000 |
317 | str r3, [r0] | |
1da177e4 | 318 | #endif |
1da177e4 LT |
319 | #ifdef CONFIG_ARCH_RPC |
320 | /* | |
321 | * Map in screen at 0x02000000 & SCREEN2_BASE | |
322 | * Similar reasons here - for debug. This is | |
323 | * only for Acorn RiscPC architectures. | |
324 | */ | |
e73fc88e | 325 | add r0, r4, #0x02000000 >> (SECTION_SHIFT - PMD_ORDER) |
c77b0427 | 326 | orr r3, r7, #0x02000000 |
1da177e4 | 327 | str r3, [r0] |
e73fc88e | 328 | add r0, r4, #0xd8000000 >> (SECTION_SHIFT - PMD_ORDER) |
1da177e4 | 329 | str r3, [r0] |
c77b0427 | 330 | #endif |
1b6ba46b CM |
331 | #endif |
332 | #ifdef CONFIG_ARM_LPAE | |
333 | sub r4, r4, #0x1000 @ point to the PGD table | |
4756dcbf | 334 | mov r4, r4, lsr #ARCH_PGD_SHIFT |
1da177e4 LT |
335 | #endif |
336 | mov pc, lr | |
93ed3970 | 337 | ENDPROC(__create_page_tables) |
1da177e4 | 338 | .ltorg |
4f79a5dd | 339 | .align |
72662e01 | 340 | __turn_mmu_on_loc: |
786f1b73 | 341 | .long . |
72662e01 WD |
342 | .long __turn_mmu_on |
343 | .long __turn_mmu_on_end | |
1da177e4 | 344 | |
00945010 RK |
345 | #if defined(CONFIG_SMP) |
346 | __CPUINIT | |
347 | ENTRY(secondary_startup) | |
348 | /* | |
349 | * Common entry point for secondary CPUs. | |
350 | * | |
351 | * Ensure that we're in SVC mode, and IRQs are disabled. Lookup | |
352 | * the processor type - there is no need to check the machine type | |
353 | * as it has already been validated by the primary processor. | |
354 | */ | |
80c59daf | 355 | #ifdef CONFIG_ARM_VIRT_EXT |
6e484be1 | 356 | bl __hyp_stub_install_secondary |
80c59daf DM |
357 | #endif |
358 | safe_svcmode_maskall r9 | |
359 | ||
00945010 RK |
360 | mrc p15, 0, r9, c0, c0 @ get processor id |
361 | bl __lookup_processor_type | |
362 | movs r10, r5 @ invalid processor? | |
363 | moveq r0, #'p' @ yes, error 'p' | |
a75e5248 | 364 | THUMB( it eq ) @ force fixup-able long branch encoding |
00945010 RK |
365 | beq __error_p |
366 | ||
367 | /* | |
368 | * Use the page tables supplied from __cpu_up. | |
369 | */ | |
370 | adr r4, __secondary_data | |
371 | ldmia r4, {r5, r7, r12} @ address to jump to after | |
d427958a CM |
372 | sub lr, r4, r5 @ mmu has been enabled |
373 | ldr r4, [r7, lr] @ get secondary_data.pgdir | |
374 | add r7, r7, #4 | |
375 | ldr r8, [r7, lr] @ get secondary_data.swapper_pg_dir | |
00945010 RK |
376 | adr lr, BSYM(__enable_mmu) @ return address |
377 | mov r13, r12 @ __secondary_switched address | |
378 | ARM( add pc, r10, #PROCINFO_INITFUNC ) @ initialise processor | |
379 | @ (return control reg) | |
380 | THUMB( add r12, r10, #PROCINFO_INITFUNC ) | |
381 | THUMB( mov pc, r12 ) | |
382 | ENDPROC(secondary_startup) | |
383 | ||
384 | /* | |
385 | * r6 = &secondary_data | |
386 | */ | |
387 | ENTRY(__secondary_switched) | |
388 | ldr sp, [r7, #4] @ get secondary_data.stack | |
389 | mov fp, #0 | |
390 | b secondary_start_kernel | |
391 | ENDPROC(__secondary_switched) | |
392 | ||
4f79a5dd DM |
393 | .align |
394 | ||
00945010 RK |
395 | .type __secondary_data, %object |
396 | __secondary_data: | |
397 | .long . | |
398 | .long secondary_data | |
399 | .long __secondary_switched | |
400 | #endif /* defined(CONFIG_SMP) */ | |
401 | ||
402 | ||
403 | ||
404 | /* | |
405 | * Setup common bits before finally enabling the MMU. Essentially | |
406 | * this is just loading the page table pointer and domain access | |
407 | * registers. | |
865a4fae RK |
408 | * |
409 | * r0 = cp#15 control register | |
410 | * r1 = machine ID | |
4c2896e8 | 411 | * r2 = atags or dtb pointer |
4756dcbf | 412 | * r4 = page table (see ARCH_PGD_SHIFT in asm/memory.h) |
865a4fae RK |
413 | * r9 = processor ID |
414 | * r13 = *virtual* address to jump to upon completion | |
00945010 RK |
415 | */ |
416 | __enable_mmu: | |
8428e84d | 417 | #if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6 |
00945010 RK |
418 | orr r0, r0, #CR_A |
419 | #else | |
420 | bic r0, r0, #CR_A | |
421 | #endif | |
422 | #ifdef CONFIG_CPU_DCACHE_DISABLE | |
423 | bic r0, r0, #CR_C | |
424 | #endif | |
425 | #ifdef CONFIG_CPU_BPREDICT_DISABLE | |
426 | bic r0, r0, #CR_Z | |
427 | #endif | |
428 | #ifdef CONFIG_CPU_ICACHE_DISABLE | |
429 | bic r0, r0, #CR_I | |
430 | #endif | |
4756dcbf | 431 | #ifndef CONFIG_ARM_LPAE |
00945010 RK |
432 | mov r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \ |
433 | domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \ | |
434 | domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \ | |
435 | domain_val(DOMAIN_IO, DOMAIN_CLIENT)) | |
436 | mcr p15, 0, r5, c3, c0, 0 @ load domain access register | |
437 | mcr p15, 0, r4, c2, c0, 0 @ load page table pointer | |
1b6ba46b | 438 | #endif |
00945010 RK |
439 | b __turn_mmu_on |
440 | ENDPROC(__enable_mmu) | |
441 | ||
442 | /* | |
443 | * Enable the MMU. This completely changes the structure of the visible | |
444 | * memory space. You will not be able to trace execution through this. | |
445 | * If you have an enquiry about this, *please* check the linux-arm-kernel | |
446 | * mailing list archives BEFORE sending another post to the list. | |
447 | * | |
448 | * r0 = cp#15 control register | |
865a4fae | 449 | * r1 = machine ID |
4c2896e8 | 450 | * r2 = atags or dtb pointer |
865a4fae | 451 | * r9 = processor ID |
00945010 RK |
452 | * r13 = *virtual* address to jump to upon completion |
453 | * | |
454 | * other registers depend on the function called upon completion | |
455 | */ | |
456 | .align 5 | |
4e8ee7de WD |
457 | .pushsection .idmap.text, "ax" |
458 | ENTRY(__turn_mmu_on) | |
00945010 | 459 | mov r0, r0 |
d675d0bc | 460 | instr_sync |
00945010 RK |
461 | mcr p15, 0, r0, c1, c0, 0 @ write control reg |
462 | mrc p15, 0, r3, c0, c0, 0 @ read id reg | |
d675d0bc | 463 | instr_sync |
00945010 RK |
464 | mov r3, r3 |
465 | mov r3, r13 | |
466 | mov pc, r3 | |
72662e01 | 467 | __turn_mmu_on_end: |
00945010 | 468 | ENDPROC(__turn_mmu_on) |
4e8ee7de | 469 | .popsection |
00945010 | 470 | |
1da177e4 | 471 | |
f00ec48f | 472 | #ifdef CONFIG_SMP_ON_UP |
4a9cb360 | 473 | __INIT |
f00ec48f | 474 | __fixup_smp: |
e98ff0f5 RK |
475 | and r3, r9, #0x000f0000 @ architecture version |
476 | teq r3, #0x000f0000 @ CPU ID supported? | |
f00ec48f RK |
477 | bne __fixup_smp_on_up @ no, assume UP |
478 | ||
e98ff0f5 RK |
479 | bic r3, r9, #0x00ff0000 |
480 | bic r3, r3, #0x0000000f @ mask 0xff00fff0 | |
481 | mov r4, #0x41000000 | |
0eb0511d | 482 | orr r4, r4, #0x0000b000 |
e98ff0f5 RK |
483 | orr r4, r4, #0x00000020 @ val 0x4100b020 |
484 | teq r3, r4 @ ARM 11MPCore? | |
f00ec48f RK |
485 | moveq pc, lr @ yes, assume SMP |
486 | ||
487 | mrc p15, 0, r0, c0, c0, 5 @ read MPIDR | |
e98ff0f5 RK |
488 | and r0, r0, #0xc0000000 @ multiprocessing extensions and |
489 | teq r0, #0x80000000 @ not part of a uniprocessor system? | |
490 | moveq pc, lr @ yes, assume SMP | |
f00ec48f RK |
491 | |
492 | __fixup_smp_on_up: | |
493 | adr r0, 1f | |
0eb0511d | 494 | ldmia r0, {r3 - r5} |
f00ec48f | 495 | sub r3, r0, r3 |
0eb0511d RK |
496 | add r4, r4, r3 |
497 | add r5, r5, r3 | |
4a9cb360 | 498 | b __do_fixup_smp_on_up |
f00ec48f RK |
499 | ENDPROC(__fixup_smp) |
500 | ||
4f79a5dd | 501 | .align |
f00ec48f RK |
502 | 1: .word . |
503 | .word __smpalt_begin | |
504 | .word __smpalt_end | |
505 | ||
506 | .pushsection .data | |
507 | .globl smp_on_up | |
508 | smp_on_up: | |
509 | ALT_SMP(.long 1) | |
510 | ALT_UP(.long 0) | |
511 | .popsection | |
4a9cb360 | 512 | #endif |
f00ec48f | 513 | |
4a9cb360 RK |
514 | .text |
515 | __do_fixup_smp_on_up: | |
516 | cmp r4, r5 | |
517 | movhs pc, lr | |
518 | ldmia r4!, {r0, r6} | |
519 | ARM( str r6, [r0, r3] ) | |
520 | THUMB( add r0, r0, r3 ) | |
521 | #ifdef __ARMEB__ | |
522 | THUMB( mov r6, r6, ror #16 ) @ Convert word order for big-endian. | |
f00ec48f | 523 | #endif |
4a9cb360 RK |
524 | THUMB( strh r6, [r0], #2 ) @ For Thumb-2, store as two halfwords |
525 | THUMB( mov r6, r6, lsr #16 ) @ to be robust against misaligned r3. | |
526 | THUMB( strh r6, [r0] ) | |
527 | b __do_fixup_smp_on_up | |
528 | ENDPROC(__do_fixup_smp_on_up) | |
529 | ||
530 | ENTRY(fixup_smp) | |
531 | stmfd sp!, {r4 - r6, lr} | |
532 | mov r4, r0 | |
533 | add r5, r0, r1 | |
534 | mov r3, #0 | |
535 | bl __do_fixup_smp_on_up | |
536 | ldmfd sp!, {r4 - r6, pc} | |
537 | ENDPROC(fixup_smp) | |
f00ec48f | 538 | |
dc21af99 RK |
539 | #ifdef CONFIG_ARM_PATCH_PHYS_VIRT |
540 | ||
541 | /* __fixup_pv_table - patch the stub instructions with the delta between | |
542 | * PHYS_OFFSET and PAGE_OFFSET, which is assumed to be 16MiB aligned and | |
543 | * can be expressed by an immediate shifter operand. The stub instruction | |
544 | * has a form of '(add|sub) rd, rn, #imm'. | |
545 | */ | |
546 | __HEAD | |
547 | __fixup_pv_table: | |
548 | adr r0, 1f | |
549 | ldmia r0, {r3-r5, r7} | |
550 | sub r3, r0, r3 @ PHYS_OFFSET - PAGE_OFFSET | |
551 | add r4, r4, r3 @ adjust table start address | |
552 | add r5, r5, r3 @ adjust table end address | |
b511d75d NP |
553 | add r7, r7, r3 @ adjust __pv_phys_offset address |
554 | str r8, [r7] @ save computed PHYS_OFFSET to __pv_phys_offset | |
dc21af99 RK |
555 | mov r6, r3, lsr #24 @ constant for add/sub instructions |
556 | teq r3, r6, lsl #24 @ must be 16MiB aligned | |
b511d75d | 557 | THUMB( it ne @ cross section branch ) |
dc21af99 RK |
558 | bne __error |
559 | str r6, [r7, #4] @ save to __pv_offset | |
560 | b __fixup_a_pv_table | |
561 | ENDPROC(__fixup_pv_table) | |
562 | ||
563 | .align | |
564 | 1: .long . | |
565 | .long __pv_table_begin | |
566 | .long __pv_table_end | |
567 | 2: .long __pv_phys_offset | |
568 | ||
569 | .text | |
570 | __fixup_a_pv_table: | |
b511d75d | 571 | #ifdef CONFIG_THUMB2_KERNEL |
daece596 NP |
572 | lsls r6, #24 |
573 | beq 2f | |
b511d75d NP |
574 | clz r7, r6 |
575 | lsr r6, #24 | |
576 | lsl r6, r7 | |
577 | bic r6, #0x0080 | |
578 | lsrs r7, #1 | |
579 | orrcs r6, #0x0080 | |
580 | orr r6, r6, r7, lsl #12 | |
581 | orr r6, #0x4000 | |
daece596 NP |
582 | b 2f |
583 | 1: add r7, r3 | |
584 | ldrh ip, [r7, #2] | |
b511d75d | 585 | and ip, 0x8f00 |
daece596 | 586 | orr ip, r6 @ mask in offset bits 31-24 |
b511d75d | 587 | strh ip, [r7, #2] |
daece596 | 588 | 2: cmp r4, r5 |
b511d75d | 589 | ldrcc r7, [r4], #4 @ use branch for delay slot |
daece596 | 590 | bcc 1b |
b511d75d NP |
591 | bx lr |
592 | #else | |
daece596 NP |
593 | b 2f |
594 | 1: ldr ip, [r7, r3] | |
dc21af99 | 595 | bic ip, ip, #0x000000ff |
daece596 | 596 | orr ip, ip, r6 @ mask in offset bits 31-24 |
dc21af99 | 597 | str ip, [r7, r3] |
daece596 | 598 | 2: cmp r4, r5 |
dc21af99 | 599 | ldrcc r7, [r4], #4 @ use branch for delay slot |
daece596 | 600 | bcc 1b |
dc21af99 | 601 | mov pc, lr |
b511d75d | 602 | #endif |
dc21af99 RK |
603 | ENDPROC(__fixup_a_pv_table) |
604 | ||
605 | ENTRY(fixup_pv_table) | |
606 | stmfd sp!, {r4 - r7, lr} | |
607 | ldr r2, 2f @ get address of __pv_phys_offset | |
608 | mov r3, #0 @ no offset | |
609 | mov r4, r0 @ r0 = table start | |
610 | add r5, r0, r1 @ r1 = table size | |
611 | ldr r6, [r2, #4] @ get __pv_offset | |
612 | bl __fixup_a_pv_table | |
613 | ldmfd sp!, {r4 - r7, pc} | |
614 | ENDPROC(fixup_pv_table) | |
615 | ||
616 | .align | |
617 | 2: .long __pv_phys_offset | |
618 | ||
619 | .data | |
620 | .globl __pv_phys_offset | |
621 | .type __pv_phys_offset, %object | |
622 | __pv_phys_offset: | |
623 | .long 0 | |
624 | .size __pv_phys_offset, . - __pv_phys_offset | |
625 | __pv_offset: | |
626 | .long 0 | |
627 | #endif | |
628 | ||
75d90832 | 629 | #include "head-common.S" |