[deliverable/linux.git] / arch / arm / mach-ixp2000 / ixdp2800.c

/*
 * arch/arm/mach-ixp2000/ixdp2800.c
 *
 * IXDP2800 platform support
 *
 * Original Author: Jeffrey Daly <jeffrey.daly@intel.com>
 * Maintainer: Deepak Saxena <dsaxena@plexity.net>
 *
 * Copyright (C) 2002 Intel Corp.
 * Copyright (C) 2003-2004 MontaVista Software, Inc.
 *
 *  This program is free software; you can redistribute  it and/or modify it
 *  under  the terms of  the GNU General  Public License as published by the
 *  Free Software Foundation;  either version 2 of the  License, or (at your
 *  option) any later version.
 */
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/bitops.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/io.h>

#include <asm/irq.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/system.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>

#include <asm/mach/pci.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/mach/flash.h>
#include <asm/mach/arch.h>

/*************************************************************************
 * IXDP2800 timer tick
 *************************************************************************/

static void __init ixdp2800_timer_init(void)
{
	ixp2000_init_time(50000000);
}

static struct sys_timer ixdp2800_timer = {
	.init		= ixdp2800_timer_init,
	.offset		= ixp2000_gettimeoffset,
};

/*************************************************************************
 * IXDP2800 PCI
 *************************************************************************/
static void __init ixdp2800_slave_disable_pci_master(void)
{
	*IXP2000_PCI_CMDSTAT &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
}

static void __init ixdp2800_master_wait_for_slave(void)
{
	volatile u32 *addr;

	printk(KERN_INFO "IXDP2800: waiting for slave NPU to configure "
			 "its BAR sizes\n");

	addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN,
					PCI_BASE_ADDRESS_1);
	do {
		*addr = 0xffffffff;
		cpu_relax();
	} while (*addr != 0xfe000008);

	addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN,
					PCI_BASE_ADDRESS_2);
	do {
		*addr = 0xffffffff;
		cpu_relax();
	} while (*addr != 0xc0000008);

	/*
	 * Configure the slave's SDRAM BAR by hand.
	 */
	*addr = 0x40000008;
}

static void __init ixdp2800_slave_wait_for_master_enable(void)
{
	printk(KERN_INFO "IXDP2800: waiting for master NPU to enable us\n");

	while ((*IXP2000_PCI_CMDSTAT & PCI_COMMAND_MASTER) == 0)
		cpu_relax();
}

void __init ixdp2800_pci_preinit(void)
{
	printk("ixdp2x00_pci_preinit called\n");

	*IXP2000_PCI_ADDR_EXT = 0x0001e000;

	if (!ixdp2x00_master_npu())
		ixdp2800_slave_disable_pci_master();

	*IXP2000_PCI_SRAM_BASE_ADDR_MASK = (0x2000000 - 1) & ~0x3ffff;
	*IXP2000_PCI_DRAM_BASE_ADDR_MASK = (0x40000000 - 1) & ~0xfffff;

	ixp2000_pci_preinit();

	if (ixdp2x00_master_npu()) {
		/*
		 * Wait until the slave set its SRAM/SDRAM BAR sizes
		 * correctly before we proceed to scan and enumerate
		 * the bus.
		 */
		ixdp2800_master_wait_for_slave();

		/*
		 * We configure the SDRAM BARs by hand because they
		 * are 1G and fall outside of the regular allocated
		 * PCI address space.
		 */
		*IXP2000_PCI_SDRAM_BAR = 0x00000008;
	} else {
		/*
		 * Wait for the master to complete scanning the bus
		 * and assigning resources before we proceed to scan
		 * the bus ourselves.  Set pci=firmware to honor the
		 * master's resource assignment.
		 */
		ixdp2800_slave_wait_for_master_enable();
		pcibios_setup("firmware");
	}
}

/*
 * We assign the SDRAM BARs for the two IXP2800 CPUs by hand, outside
 * of the regular PCI window, because there's only 512M of outbound PCI
 * memory window on each IXP, while we need 1G for each of the BARs.
 */
static void __devinit ixp2800_pci_fixup(struct pci_dev *dev)
{
	if (machine_is_ixdp2800()) {
		dev->resource[2].start = 0;
		dev->resource[2].end   = 0;
		dev->resource[2].flags = 0;
	}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IXP2800, ixp2800_pci_fixup);

static int __init ixdp2800_pci_setup(int nr, struct pci_sys_data *sys)
{
	sys->mem_offset = 0x00000000;

	ixp2000_pci_setup(nr, sys);

	return 1;
}

static int __init ixdp2800_pci_map_irq(const struct pci_dev *dev, u8 slot,
	u8 pin)
{
	if (ixdp2x00_master_npu()) {

		/*
		 * Root bus devices.  Slave NPU is only one with interrupt.
		 * Everything else, we just return -1 which is invalid.
		 */
		if(!dev->bus->self) {
			if(dev->devfn == IXDP2X00_SLAVE_NPU_DEVFN )
				return IRQ_IXDP2800_INGRESS_NPU;

			return -1;
		}

		/*
		 * Bridge behind the PMC slot.
		 */
		if(dev->bus->self->devfn == IXDP2X00_PMC_DEVFN &&
			dev->bus->parent->self->devfn == IXDP2X00_P2P_DEVFN &&
			!dev->bus->parent->self->bus->parent)
				  return IRQ_IXDP2800_PMC;

		/*
		 * Device behind the first bridge
		 */
		if(dev->bus->self->devfn == IXDP2X00_P2P_DEVFN) {
			switch(dev->devfn) {
				case IXDP2X00_PMC_DEVFN:
					return IRQ_IXDP2800_PMC;	
			
				case IXDP2800_MASTER_ENET_DEVFN:
					return IRQ_IXDP2800_EGRESS_ENET;

				case IXDP2800_SWITCH_FABRIC_DEVFN:
					return IRQ_IXDP2800_FABRIC;
			}
		}

		return -1;
	} else return IRQ_IXP2000_PCIB; /* Slave NIC interrupt */
}

static void __init ixdp2800_master_enable_slave(void)
{
	volatile u32 *addr;

	printk(KERN_INFO "IXDP2800: enabling slave NPU\n");

	addr = (volatile u32 *)ixp2000_pci_config_addr(0,
					IXDP2X00_SLAVE_NPU_DEVFN,
					PCI_COMMAND);

	*addr |= PCI_COMMAND_MASTER;
}

static void __init ixdp2800_master_wait_for_slave_bus_scan(void)
{
	volatile u32 *addr;

	printk(KERN_INFO "IXDP2800: waiting for slave to finish bus scan\n");

	addr = (volatile u32 *)ixp2000_pci_config_addr(0,
					IXDP2X00_SLAVE_NPU_DEVFN,
					PCI_COMMAND);
	while ((*addr & PCI_COMMAND_MEMORY) == 0)
		cpu_relax();
}

static void __init ixdp2800_slave_signal_bus_scan_completion(void)
{
	printk(KERN_INFO "IXDP2800: bus scan done, signaling master\n");
	*IXP2000_PCI_CMDSTAT |= PCI_COMMAND_MEMORY;
}

static void __init ixdp2800_pci_postinit(void)
{
	if (!ixdp2x00_master_npu()) {
		ixdp2x00_slave_pci_postinit();
		ixdp2800_slave_signal_bus_scan_completion();
	}
}

struct __initdata hw_pci ixdp2800_pci __initdata = {
	.nr_controllers	= 1,
	.setup		= ixdp2800_pci_setup,
	.preinit	= ixdp2800_pci_preinit,
	.postinit	= ixdp2800_pci_postinit,
	.scan		= ixp2000_pci_scan_bus,
	.map_irq	= ixdp2800_pci_map_irq,
};

int __init ixdp2800_pci_init(void)
{
	if (machine_is_ixdp2800()) {
		struct pci_dev *dev;

		pci_common_init(&ixdp2800_pci);
		if (ixdp2x00_master_npu()) {
			dev = pci_get_bus_and_slot(1, IXDP2800_SLAVE_ENET_DEVFN);
			pci_remove_bus_device(dev);
			pci_dev_put(dev);

			ixdp2800_master_enable_slave();
			ixdp2800_master_wait_for_slave_bus_scan();
		} else {
			dev = pci_get_bus_and_slot(1, IXDP2800_MASTER_ENET_DEVFN);
			pci_remove_bus_device(dev);
			pci_dev_put(dev);
		}
	}

	return 0;
}

subsys_initcall(ixdp2800_pci_init);

void __init ixdp2800_init_irq(void)
{
	ixdp2x00_init_irq(IXDP2800_CPLD_INT_STAT, IXDP2800_CPLD_INT_MASK, IXDP2800_NR_IRQS);
}

MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform")
	/* Maintainer: MontaVista Software, Inc. */
	.atag_offset	= 0x100,
	.map_io		= ixdp2x00_map_io,
	.init_irq	= ixdp2800_init_irq,
	.timer		= &ixdp2800_timer,
	.init_machine	= ixdp2x00_init_machine,
	.restart	= ixp2000_restart,
MACHINE_END
Commit	Line	Data
1da177e4 LT	1	/*
	2	* arch/arm/mach-ixp2000/ixdp2800.c
	3	*
	4	* IXDP2800 platform support
	5	*
	6	* Original Author: Jeffrey Daly <jeffrey.daly@intel.com>
	7	* Maintainer: Deepak Saxena <dsaxena@plexity.net>
	8	*
	9	* Copyright (C) 2002 Intel Corp.
	10	* Copyright (C) 2003-2004 MontaVista Software, Inc.
	11	*
	12	* This program is free software; you can redistribute it and/or modify it
	13	* under the terms of the GNU General Public License as published by the
	14	* Free Software Foundation; either version 2 of the License, or (at your
	15	* option) any later version.
	16	*/
1da177e4 LT	17	#include <linux/kernel.h>
	18	#include <linux/init.h>
	19	#include <linux/mm.h>
	20	#include <linux/sched.h>
	21	#include <linux/interrupt.h>
	22	#include <linux/device.h>
	23	#include <linux/bitops.h>
	24	#include <linux/pci.h>
	25	#include <linux/ioport.h>
1da177e4	26	#include <linux/delay.h>
fced80c7	27	#include <linux/io.h>
1da177e4	28
1da177e4 LT	29	#include <asm/irq.h>
	30	#include <asm/pgtable.h>
	31	#include <asm/page.h>
	32	#include <asm/system.h>
a09e64fb	33	#include <mach/hardware.h>
1da177e4 LT	34	#include <asm/mach-types.h>
	35
	36	#include <asm/mach/pci.h>
	37	#include <asm/mach/map.h>
	38	#include <asm/mach/irq.h>
	39	#include <asm/mach/time.h>
	40	#include <asm/mach/flash.h>
	41	#include <asm/mach/arch.h>
	42
1da177e4 LT	43	/*************************************************************************
	44	* IXDP2800 timer tick
	45	*************************************************************************/
	46
	47	static void __init ixdp2800_timer_init(void)
	48	{
	49	ixp2000_init_time(50000000);
	50	}
	51
	52	static struct sys_timer ixdp2800_timer = {
	53	.init = ixdp2800_timer_init,
	54	.offset = ixp2000_gettimeoffset,
	55	};
	56
	57	/*************************************************************************
	58	* IXDP2800 PCI
	59	*************************************************************************/
53e173f6 LB	60	static void __init ixdp2800_slave_disable_pci_master(void)
	61	{
	62	*IXP2000_PCI_CMDSTAT &= ~(PCI_COMMAND_MASTER \| PCI_COMMAND_MEMORY);
	63	}
	64
	65	static void __init ixdp2800_master_wait_for_slave(void)
	66	{
	67	volatile u32 *addr;
	68
	69	printk(KERN_INFO "IXDP2800: waiting for slave NPU to configure "
	70	"its BAR sizes\n");
	71
	72	addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN,
	73	PCI_BASE_ADDRESS_1);
	74	do {
	75	*addr = 0xffffffff;
	76	cpu_relax();
	77	} while (*addr != 0xfe000008);
	78
	79	addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN,
	80	PCI_BASE_ADDRESS_2);
	81	do {
	82	*addr = 0xffffffff;
	83	cpu_relax();
	84	} while (*addr != 0xc0000008);
	85
	86	/*
	87	* Configure the slave's SDRAM BAR by hand.
	88	*/
	89	*addr = 0x40000008;
	90	}
	91
	92	static void __init ixdp2800_slave_wait_for_master_enable(void)
	93	{
	94	printk(KERN_INFO "IXDP2800: waiting for master NPU to enable us\n");
	95
	96	while ((*IXP2000_PCI_CMDSTAT & PCI_COMMAND_MASTER) == 0)
	97	cpu_relax();
	98	}
	99
1da177e4 LT	100	void __init ixdp2800_pci_preinit(void)
	101	{
	102	printk("ixdp2x00_pci_preinit called\n");
	103
53e173f6 LB	104	*IXP2000_PCI_ADDR_EXT = 0x0001e000;
	105
	106	if (!ixdp2x00_master_npu())
	107	ixdp2800_slave_disable_pci_master();
1da177e4	108
1da177e4	109	*IXP2000_PCI_SRAM_BASE_ADDR_MASK = (0x2000000 - 1) & ~0x3ffff;
53e173f6	110	*IXP2000_PCI_DRAM_BASE_ADDR_MASK = (0x40000000 - 1) & ~0xfffff;
1da177e4 LT	111
1da177e4 LT	112	ixp2000_pci_preinit();
53e173f6 LB	113
	114	if (ixdp2x00_master_npu()) {
	115	/*
	116	* Wait until the slave set its SRAM/SDRAM BAR sizes
	117	* correctly before we proceed to scan and enumerate
	118	* the bus.
	119	*/
	120	ixdp2800_master_wait_for_slave();
	121
	122	/*
	123	* We configure the SDRAM BARs by hand because they
	124	* are 1G and fall outside of the regular allocated
	125	* PCI address space.
	126	*/
	127	*IXP2000_PCI_SDRAM_BAR = 0x00000008;
	128	} else {
	129	/*
	130	* Wait for the master to complete scanning the bus
	131	* and assigning resources before we proceed to scan
	132	* the bus ourselves. Set pci=firmware to honor the
	133	* master's resource assignment.
	134	*/
	135	ixdp2800_slave_wait_for_master_enable();
	136	pcibios_setup("firmware");
	137	}
1da177e4 LT	138	}
1da177e4 LT	139
53e173f6 LB	140	/*
	141	* We assign the SDRAM BARs for the two IXP2800 CPUs by hand, outside
	142	* of the regular PCI window, because there's only 512M of outbound PCI
	143	* memory window on each IXP, while we need 1G for each of the BARs.
	144	*/
	145	static void __devinit ixp2800_pci_fixup(struct pci_dev *dev)
	146	{
	147	if (machine_is_ixdp2800()) {
	148	dev->resource[2].start = 0;
	149	dev->resource[2].end = 0;
	150	dev->resource[2].flags = 0;
	151	}
	152	}
	153	DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IXP2800, ixp2800_pci_fixup);
	154
	155	static int __init ixdp2800_pci_setup(int nr, struct pci_sys_data *sys)
1da177e4 LT	156	{
	157	sys->mem_offset = 0x00000000;
	158
	159	ixp2000_pci_setup(nr, sys);
	160
	161	return 1;
	162	}
	163
d5341942 RB	164	static int __init ixdp2800_pci_map_irq(const struct pci_dev *dev, u8 slot,
d5341942 RB	165	u8 pin)
1da177e4 LT	166	{
	167	if (ixdp2x00_master_npu()) {
	168
	169	/*
	170	* Root bus devices. Slave NPU is only one with interrupt.
	171	* Everything else, we just return -1 which is invalid.
	172	*/
	173	if(!dev->bus->self) {
	174	if(dev->devfn == IXDP2X00_SLAVE_NPU_DEVFN )
	175	return IRQ_IXDP2800_INGRESS_NPU;
	176
	177	return -1;
	178	}
	179
	180	/*
	181	* Bridge behind the PMC slot.
	182	*/
	183	if(dev->bus->self->devfn == IXDP2X00_PMC_DEVFN &&
	184	dev->bus->parent->self->devfn == IXDP2X00_P2P_DEVFN &&
	185	!dev->bus->parent->self->bus->parent)
	186	return IRQ_IXDP2800_PMC;
	187
	188	/*
	189	* Device behind the first bridge
	190	*/
	191	if(dev->bus->self->devfn == IXDP2X00_P2P_DEVFN) {
	192	switch(dev->devfn) {
	193	case IXDP2X00_PMC_DEVFN:
	194	return IRQ_IXDP2800_PMC;
	195
	196	case IXDP2800_MASTER_ENET_DEVFN:
	197	return IRQ_IXDP2800_EGRESS_ENET;
	198
	199	case IXDP2800_SWITCH_FABRIC_DEVFN:
	200	return IRQ_IXDP2800_FABRIC;
	201	}
	202	}
	203
	204	return -1;
	205	} else return IRQ_IXP2000_PCIB; /* Slave NIC interrupt */
	206	}
	207
53e173f6	208	static void __init ixdp2800_master_enable_slave(void)
1da177e4	209	{
53e173f6	210	volatile u32 *addr;
1da177e4	211
53e173f6 LB	212	printk(KERN_INFO "IXDP2800: enabling slave NPU\n");
	213
	214	addr = (volatile u32 *)ixp2000_pci_config_addr(0,
	215	IXDP2X00_SLAVE_NPU_DEVFN,
	216	PCI_COMMAND);
	217
	218	*addr \|= PCI_COMMAND_MASTER;
	219	}
1da177e4	220
53e173f6 LB	221	static void __init ixdp2800_master_wait_for_slave_bus_scan(void)
	222	{
	223	volatile u32 *addr;
	224
	225	printk(KERN_INFO "IXDP2800: waiting for slave to finish bus scan\n");
	226
	227	addr = (volatile u32 *)ixp2000_pci_config_addr(0,
	228	IXDP2X00_SLAVE_NPU_DEVFN,
	229	PCI_COMMAND);
	230	while ((*addr & PCI_COMMAND_MEMORY) == 0)
	231	cpu_relax();
	232	}
	233
	234	static void __init ixdp2800_slave_signal_bus_scan_completion(void)
	235	{
	236	printk(KERN_INFO "IXDP2800: bus scan done, signaling master\n");
	237	*IXP2000_PCI_CMDSTAT \|= PCI_COMMAND_MEMORY;
	238	}
	239
	240	static void __init ixdp2800_pci_postinit(void)
	241	{
	242	if (!ixdp2x00_master_npu()) {
1da177e4	243	ixdp2x00_slave_pci_postinit();
53e173f6	244	ixdp2800_slave_signal_bus_scan_completion();
1da177e4 LT	245	}
	246	}
	247
53e173f6	248	struct __initdata hw_pci ixdp2800_pci __initdata = {
1da177e4 LT	249	.nr_controllers = 1,
	250	.setup = ixdp2800_pci_setup,
	251	.preinit = ixdp2800_pci_preinit,
	252	.postinit = ixdp2800_pci_postinit,
	253	.scan = ixp2000_pci_scan_bus,
	254	.map_irq = ixdp2800_pci_map_irq,
	255	};
	256
	257	int __init ixdp2800_pci_init(void)
	258	{
53e173f6 LB	259	if (machine_is_ixdp2800()) {
	260	struct pci_dev *dev;
	261
1da177e4	262	pci_common_init(&ixdp2800_pci);
53e173f6	263	if (ixdp2x00_master_npu()) {
7281c248	264	dev = pci_get_bus_and_slot(1, IXDP2800_SLAVE_ENET_DEVFN);
53e173f6	265	pci_remove_bus_device(dev);
7281c248	266	pci_dev_put(dev);
53e173f6 LB	267
	268	ixdp2800_master_enable_slave();
	269	ixdp2800_master_wait_for_slave_bus_scan();
	270	} else {
7281c248	271	dev = pci_get_bus_and_slot(1, IXDP2800_MASTER_ENET_DEVFN);
53e173f6	272	pci_remove_bus_device(dev);
7281c248	273	pci_dev_put(dev);
53e173f6 LB	274	}
53e173f6 LB	275	}
1da177e4 LT	276
	277	return 0;
	278	}
	279
	280	subsys_initcall(ixdp2800_pci_init);
	281
cdea4606	282	void __init ixdp2800_init_irq(void)
1da177e4 LT	283	{
	284	ixdp2x00_init_irq(IXDP2800_CPLD_INT_STAT, IXDP2800_CPLD_INT_MASK, IXDP2800_NR_IRQS);
	285	}
	286
	287	MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform")
e9dea0c6	288	/* Maintainer: MontaVista Software, Inc. */
ade59318	289	.atag_offset = 0x100,
e9dea0c6 RK	290	.map_io = ixdp2x00_map_io,
e9dea0c6 RK	291	.init_irq = ixdp2800_init_irq,
1da177e4	292	.timer = &ixdp2800_timer,
e9dea0c6	293	.init_machine = ixdp2x00_init_machine,
1139b926	294	.restart = ixp2000_restart,
1da177e4 LT	295	MACHINE_END
1da177e4 LT	296