projects / deliverable / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
ARM: LPC32XX: Phytec 3250 platform support
[deliverable/linux.git] / arch / arm / mach-lpc32xx / phy3250.c
CommitLineData
19d95e1a
KW		 1/*
2 * arch/arm/mach-lpc32xx/phy3250.c
3 *
4 * Author: Kevin Wells <kevin.wells@nxp.com>
5 *
6 * Copyright (C) 2010 NXP Semiconductors
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 */
18
19#include <linux/init.h>
20#include <linux/platform_device.h>
21#include <linux/sysdev.h>
22#include <linux/interrupt.h>
23#include <linux/irq.h>
24#include <linux/dma-mapping.h>
25#include <linux/device.h>
26#include <linux/spi/spi.h>
27#include <linux/spi/eeprom.h>
28#include <linux/leds.h>
29#include <linux/gpio.h>
30#include <linux/amba/bus.h>
31#include <linux/amba/clcd.h>
32#include <linux/amba/pl022.h>
33
34#include <asm/setup.h>
35#include <asm/mach-types.h>
36#include <asm/mach/arch.h>
37
38#include <mach/hardware.h>
39#include <mach/platform.h>
40#include "common.h"
41
42/*
43 * Mapped GPIOLIB GPIOs
44 */
45#define SPI0_CS_GPIO LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
46#define LCD_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0)
47#define BKL_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4)
48#define LED_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 1)
49
50/*
51 * AMBA LCD controller
52 */
53static struct clcd_panel conn_lcd_panel = {
54 .mode = {
55 .name = "QVGA portrait",
56 .refresh = 60,
57 .xres = 240,
58 .yres = 320,
59 .pixclock = 191828,
60 .left_margin = 22,
61 .right_margin = 11,
62 .upper_margin = 2,
63 .lower_margin = 1,
64 .hsync_len = 5,
65 .vsync_len = 2,
66 .sync = 0,
67 .vmode = FB_VMODE_NONINTERLACED,
68 },
69 .width = -1,
70 .height = -1,
71 .tim2 = (TIM2_IVS | TIM2_IHS),
72 .cntl = (CNTL_BGR | CNTL_LCDTFT | CNTL_LCDVCOMP(1) |
73 CNTL_LCDBPP16_565),
74 .bpp = 16,
75};
76#define PANEL_SIZE (3 * SZ_64K)
77
78static int lpc32xx_clcd_setup(struct clcd_fb *fb)
79{
80 dma_addr_t dma;
81
82 fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev,
83 PANEL_SIZE, &dma, GFP_KERNEL);
84 if (!fb->fb.screen_base) {
85 printk(KERN_ERR "CLCD: unable to map framebuffer\n");
86 return -ENOMEM;
87 }
88
89 fb->fb.fix.smem_start = dma;
90 fb->fb.fix.smem_len = PANEL_SIZE;
91 fb->panel = &conn_lcd_panel;
92
93 if (gpio_request(LCD_POWER_GPIO, "LCD power"))
94 printk(KERN_ERR "Error requesting gpio %u",
95 LCD_POWER_GPIO);
96 else if (gpio_direction_output(LCD_POWER_GPIO, 1))
97 printk(KERN_ERR "Error setting gpio %u to output",
98 LCD_POWER_GPIO);
99
100 if (gpio_request(BKL_POWER_GPIO, "LCD backlight power"))
101 printk(KERN_ERR "Error requesting gpio %u",
102 BKL_POWER_GPIO);
103 else if (gpio_direction_output(BKL_POWER_GPIO, 1))
104 printk(KERN_ERR "Error setting gpio %u to output",
105 BKL_POWER_GPIO);
106
107 return 0;
108}
109
110static int lpc32xx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
111{
112 return dma_mmap_writecombine(&fb->dev->dev, vma,
113 fb->fb.screen_base, fb->fb.fix.smem_start,
114 fb->fb.fix.smem_len);
115}
116
117static void lpc32xx_clcd_remove(struct clcd_fb *fb)
118{
119 dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
120 fb->fb.screen_base, fb->fb.fix.smem_start);
121}
122
123/*
124 * On some early LCD modules (1307.0), the backlight logic is inverted.
125 * For those board variants, swap the disable and enable states for
126 * BKL_POWER_GPIO.
127*/
128static void clcd_disable(struct clcd_fb *fb)
129{
130 gpio_set_value(BKL_POWER_GPIO, 0);
131 gpio_set_value(LCD_POWER_GPIO, 0);
132}
133
134static void clcd_enable(struct clcd_fb *fb)
135{
136 gpio_set_value(BKL_POWER_GPIO, 1);
137 gpio_set_value(LCD_POWER_GPIO, 1);
138}
139
140static struct clcd_board lpc32xx_clcd_data = {
141 .name = "Phytec LCD",
142 .check = clcdfb_check,
143 .decode = clcdfb_decode,
144 .disable = clcd_disable,
145 .enable = clcd_enable,
146 .setup = lpc32xx_clcd_setup,
147 .mmap = lpc32xx_clcd_mmap,
148 .remove = lpc32xx_clcd_remove,
149};
150
151static struct amba_device lpc32xx_clcd_device = {
152 .dev = {
153 .coherent_dma_mask = ~0,
154 .init_name = "dev:clcd",
155 .platform_data = &lpc32xx_clcd_data,
156 },
157 .res = {
158 .start = LPC32XX_LCD_BASE,
159 .end = (LPC32XX_LCD_BASE + SZ_4K - 1),
160 .flags = IORESOURCE_MEM,
161 },
162 .dma_mask = ~0,
163 .irq = {IRQ_LPC32XX_LCD, NO_IRQ},
164};
165
166/*
167 * AMBA SSP (SPI)
168 */
169static void phy3250_spi_cs_set(u32 control)
170{
171 gpio_set_value(SPI0_CS_GPIO, (int) control);
172}
173
174static struct pl022_config_chip spi0_chip_info = {
175 .lbm = LOOPBACK_DISABLED,
176 .com_mode = INTERRUPT_TRANSFER,
177 .iface = SSP_INTERFACE_MOTOROLA_SPI,
178 .hierarchy = SSP_MASTER,
179 .slave_tx_disable = 0,
180 .endian_tx = SSP_TX_LSB,
181 .endian_rx = SSP_RX_LSB,
182 .data_size = SSP_DATA_BITS_8,
183 .rx_lev_trig = SSP_RX_4_OR_MORE_ELEM,
184 .tx_lev_trig = SSP_TX_4_OR_MORE_EMPTY_LOC,
185 .clk_phase = SSP_CLK_FIRST_EDGE,
186 .clk_pol = SSP_CLK_POL_IDLE_LOW,
187 .ctrl_len = SSP_BITS_8,
188 .wait_state = SSP_MWIRE_WAIT_ZERO,
189 .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
190 .cs_control = phy3250_spi_cs_set,
191};
192
193static struct pl022_ssp_controller lpc32xx_ssp0_data = {
194 .bus_id = 0,
195 .num_chipselect = 1,
196 .enable_dma = 0,
197};
198
199static struct amba_device lpc32xx_ssp0_device = {
200 .dev = {
201 .coherent_dma_mask = ~0,
202 .init_name = "dev:ssp0",
203 .platform_data = &lpc32xx_ssp0_data,
204 },
205 .res = {
206 .start = LPC32XX_SSP0_BASE,
207 .end = (LPC32XX_SSP0_BASE + SZ_4K - 1),
208 .flags = IORESOURCE_MEM,
209 },
210 .dma_mask = ~0,
211 .irq = {IRQ_LPC32XX_SSP0, NO_IRQ},
212};
213
214/* AT25 driver registration */
215static int __init phy3250_spi_board_register(void)
216{
217#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
218 static struct spi_board_info info[] = {
219 {
220 .modalias = "spidev",
221 .max_speed_hz = 5000000,
222 .bus_num = 0,
223 .chip_select = 0,
224 .controller_data = &spi0_chip_info,
225 },
226 };
227
228#else
229 static struct spi_eeprom eeprom = {
230 .name = "at25256a",
231 .byte_len = 0x8000,
232 .page_size = 64,
233 .flags = EE_ADDR2,
234 };
235
236 static struct spi_board_info info[] = {
237 {
238 .modalias = "at25",
239 .max_speed_hz = 5000000,
240 .bus_num = 0,
241 .chip_select = 0,
242 .platform_data = &eeprom,
243 .controller_data = &spi0_chip_info,
244 },
245 };
246#endif
247 return spi_register_board_info(info, ARRAY_SIZE(info));
248}
249arch_initcall(phy3250_spi_board_register);
250
251static struct i2c_board_info __initdata phy3250_i2c_board_info[] = {
252 {
253 I2C_BOARD_INFO("pcf8563", 0x51),
254 },
255};
256
257static struct gpio_led phy_leds[] = {
258 {
259 .name = "led0",
260 .gpio = LED_GPIO,
261 .active_low = 1,
262 .default_trigger = "heartbeat",
263 },
264};
265
266static struct gpio_led_platform_data led_data = {
267 .leds = phy_leds,
268 .num_leds = ARRAY_SIZE(phy_leds),
269};
270
271static struct platform_device lpc32xx_gpio_led_device = {
272 .name = "leds-gpio",
273 .id = -1,
274 .dev.platform_data = &led_data,
275};
276
277static struct platform_device *phy3250_devs[] __initdata = {
278 &lpc32xx_i2c0_device,
279 &lpc32xx_i2c1_device,
280 &lpc32xx_i2c2_device,
281 &lpc32xx_watchdog_device,
282 &lpc32xx_gpio_led_device,
283};
284
285static struct amba_device *amba_devs[] __initdata = {
286 &lpc32xx_clcd_device,
287 &lpc32xx_ssp0_device,
288};
289
290/*
291 * Board specific functions
292 */
293static void __init phy3250_board_init(void)
294{
295 u32 tmp;
296 int i;
297
298 lpc32xx_gpio_init();
299
300 /* Register GPIOs used on this board */
301 if (gpio_request(SPI0_CS_GPIO, "spi0 cs"))
302 printk(KERN_ERR "Error requesting gpio %u",
303 SPI0_CS_GPIO);
304 else if (gpio_direction_output(SPI0_CS_GPIO, 1))
305 printk(KERN_ERR "Error setting gpio %u to output",
306 SPI0_CS_GPIO);
307
308 /* Setup network interface for RMII mode */
309 tmp = __raw_readl(LPC32XX_CLKPWR_MACCLK_CTRL);
310 tmp &= ~LPC32XX_CLKPWR_MACCTRL_PINS_MSK;
311 tmp |= LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS;
312 __raw_writel(tmp, LPC32XX_CLKPWR_MACCLK_CTRL);
313
314 /* Setup SLC NAND controller muxing */
315 __raw_writel(LPC32XX_CLKPWR_NANDCLK_SEL_SLC,
316 LPC32XX_CLKPWR_NAND_CLK_CTRL);
317
318 /* Setup LCD muxing to RGB565 */
319 tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL) &
320 ~(LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_MSK |
321 LPC32XX_CLKPWR_LCDCTRL_PSCALE_MSK);
322 tmp |= LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT16;
323 __raw_writel(tmp, LPC32XX_CLKPWR_LCDCLK_CTRL);
324
325 /* Set up I2C pull levels */
326 tmp = __raw_readl(LPC32XX_CLKPWR_I2C_CLK_CTRL);
327 tmp |= LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE |
328 LPC32XX_CLKPWR_I2CCLK_I2C2HI_DRIVE;
329 __raw_writel(tmp, LPC32XX_CLKPWR_I2C_CLK_CTRL);
330
331 /* Disable IrDA pulsing support on UART6 */
332 tmp = __raw_readl(LPC32XX_UARTCTL_CTRL);
333 tmp |= LPC32XX_UART_UART6_IRDAMOD_BYPASS;
334 __raw_writel(tmp, LPC32XX_UARTCTL_CTRL);
335
336 /* Enable DMA for I2S1 channel */
337 tmp = __raw_readl(LPC32XX_CLKPWR_I2S_CLK_CTRL);
338 tmp = LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA;
339 __raw_writel(tmp, LPC32XX_CLKPWR_I2S_CLK_CTRL);
340
341 lpc32xx_serial_init();
342
343 /*
344 * AMBA peripheral clocks need to be enabled prior to AMBA device
345 * detection or a data fault will occur, so enable the clocks
346 * here. However, we don't want to enable them if the peripheral
347 * isn't included in the image
348 */
349#ifdef CONFIG_FB_ARMCLCD
350 tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
351 __raw_writel((tmp | LPC32XX_CLKPWR_LCDCTRL_CLK_EN),
352 LPC32XX_CLKPWR_LCDCLK_CTRL);
353#endif
354#ifdef CONFIG_SPI_PL022
355 tmp = __raw_readl(LPC32XX_CLKPWR_SSP_CLK_CTRL);
356 __raw_writel((tmp | LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN),
357 LPC32XX_CLKPWR_SSP_CLK_CTRL);
358#endif
359
360 platform_add_devices(phy3250_devs, ARRAY_SIZE(phy3250_devs));
361 for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
362 struct amba_device *d = amba_devs[i];
363 amba_device_register(d, &iomem_resource);
364 }
365
366 /* Test clock needed for UDA1380 initial init */
367 __raw_writel(LPC32XX_CLKPWR_TESTCLK2_SEL_MOSC |
368 LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN,
369 LPC32XX_CLKPWR_TEST_CLK_SEL);
370
371 i2c_register_board_info(0, phy3250_i2c_board_info,
372 ARRAY_SIZE(phy3250_i2c_board_info));
373}
374
375static int __init lpc32xx_display_uid(void)
376{
377 u32 uid[4];
378
379 lpc32xx_get_uid(uid);
380
381 printk(KERN_INFO "LPC32XX unique ID: %08x%08x%08x%08x\n",
382 uid[3], uid[2], uid[1], uid[0]);
383
384 return 1;
385}
386arch_initcall(lpc32xx_display_uid);
387
388MACHINE_START(PHY3250, "Phytec 3250 board with the LPC3250 Microcontroller")
389 /* Maintainer: Kevin Wells, NXP Semiconductors */
390 .phys_io = LPC32XX_UART5_BASE,
391 .io_pg_offst = ((IO_ADDRESS(LPC32XX_UART5_BASE))>>18) & 0xfffc,
392 .boot_params = 0x80000100,
393 .map_io = lpc32xx_map_io,
394 .init_irq = lpc32xx_init_irq,
395 .timer = &lpc32xx_timer,
396 .init_machine = phy3250_board_init,
397MACHINE_END
Linux kernel - Deliverables
This page took 0.037013 seconds and 5 git commands to generate.