Commit | Line | Data |
---|---|---|
415c7d26 YY |
1 | /* |
2 | * KZM-ARM11-01 support | |
3 | * Copyright (C) 2009 Yoichi Yuasa <yuasa@linux-mips.org> | |
4 | * | |
5 | * based on code for MX31ADS, | |
6 | * Copyright (C) 2000 Deep Blue Solutions Ltd | |
7 | * Copyright (C) 2002 Shane Nay (shane@minirl.com) | |
8 | * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or modify | |
11 | * it under the terms of the GNU General Public License as published by | |
12 | * the Free Software Foundation; either version 2 of the License, or | |
13 | * (at your option) any later version. | |
14 | * | |
15 | * This program is distributed in the hope that it will be useful, | |
16 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
17 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
18 | * GNU General Public License for more details. | |
19 | * | |
20 | * You should have received a copy of the GNU General Public License | |
21 | * along with this program; if not, write to the Free Software | |
22 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
23 | */ | |
24 | ||
25 | #include <linux/gpio.h> | |
26 | #include <linux/init.h> | |
27 | #include <linux/platform_device.h> | |
28 | #include <linux/serial_8250.h> | |
29 | #include <linux/smsc911x.h> | |
30 | #include <linux/types.h> | |
31 | ||
32 | #include <asm/irq.h> | |
33 | #include <asm/mach-types.h> | |
34 | #include <asm/setup.h> | |
35 | #include <asm/mach/arch.h> | |
36 | #include <asm/mach/irq.h> | |
37 | #include <asm/mach/map.h> | |
38 | #include <asm/mach/time.h> | |
39 | ||
40 | #include <mach/board-kzmarm11.h> | |
41 | #include <mach/clock.h> | |
42 | #include <mach/common.h> | |
43 | #include <mach/imx-uart.h> | |
44 | #include <mach/iomux-mx3.h> | |
45 | #include <mach/memory.h> | |
46 | ||
47 | #include "devices.h" | |
48 | ||
49 | #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) | |
50 | /* | |
51 | * KZM-ARM11-01 has an external UART on FPGA | |
52 | */ | |
53 | static struct plat_serial8250_port serial_platform_data[] = { | |
54 | { | |
55 | .membase = IO_ADDRESS(KZM_ARM11_16550), | |
56 | .mapbase = KZM_ARM11_16550, | |
57 | .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), | |
58 | .irqflags = IRQ_TYPE_EDGE_RISING, | |
59 | .uartclk = 14745600, | |
60 | .regshift = 0, | |
61 | .iotype = UPIO_MEM, | |
62 | .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | | |
63 | UPF_BUGGY_UART, | |
64 | }, | |
65 | {}, | |
66 | }; | |
67 | ||
68 | static struct resource serial8250_resources[] = { | |
69 | { | |
70 | .start = KZM_ARM11_16550, | |
71 | .end = KZM_ARM11_16550 + 0x10, | |
72 | .flags = IORESOURCE_MEM, | |
73 | }, | |
74 | { | |
75 | .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), | |
76 | .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), | |
77 | .flags = IORESOURCE_IRQ, | |
78 | }, | |
79 | }; | |
80 | ||
81 | static struct platform_device serial_device = { | |
82 | .name = "serial8250", | |
83 | .id = PLAT8250_DEV_PLATFORM, | |
84 | .dev = { | |
85 | .platform_data = serial_platform_data, | |
86 | }, | |
87 | .num_resources = ARRAY_SIZE(serial8250_resources), | |
88 | .resource = serial8250_resources, | |
89 | }; | |
90 | ||
91 | static int __init kzm_init_ext_uart(void) | |
92 | { | |
93 | u8 tmp; | |
94 | ||
95 | /* | |
96 | * GPIO 1-1: external UART interrupt line | |
97 | */ | |
98 | mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO)); | |
99 | gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "ext-uart-int"); | |
100 | gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)); | |
101 | ||
102 | /* | |
103 | * Unmask UART interrupt | |
104 | */ | |
105 | tmp = __raw_readb(IO_ADDRESS(KZM_ARM11_CTL1)); | |
106 | tmp |= 0x2; | |
107 | __raw_writeb(tmp, IO_ADDRESS(KZM_ARM11_CTL1)); | |
108 | ||
109 | return platform_device_register(&serial_device); | |
110 | } | |
111 | #else | |
112 | static inline int kzm_init_ext_uart(void) | |
113 | { | |
114 | return 0; | |
115 | } | |
116 | #endif | |
117 | ||
118 | /* | |
119 | * SMSC LAN9118 | |
120 | */ | |
121 | #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) | |
122 | static struct smsc911x_platform_config kzm_smsc9118_config = { | |
123 | .phy_interface = PHY_INTERFACE_MODE_MII, | |
124 | .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, | |
125 | .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, | |
126 | .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, | |
127 | }; | |
128 | ||
129 | static struct resource kzm_smsc9118_resources[] = { | |
130 | { | |
131 | .start = CS5_BASE_ADDR, | |
132 | .end = CS5_BASE_ADDR + SZ_128K - 1, | |
133 | .flags = IORESOURCE_MEM, | |
134 | }, | |
135 | { | |
136 | .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_2), | |
137 | .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_2), | |
138 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, | |
139 | }, | |
140 | }; | |
141 | ||
142 | static struct platform_device kzm_smsc9118_device = { | |
143 | .name = "smsc911x", | |
144 | .id = -1, | |
145 | .num_resources = ARRAY_SIZE(kzm_smsc9118_resources), | |
146 | .resource = kzm_smsc9118_resources, | |
147 | .dev = { | |
148 | .platform_data = &kzm_smsc9118_config, | |
149 | }, | |
150 | }; | |
151 | ||
152 | static int __init kzm_init_smsc9118(void) | |
153 | { | |
154 | /* | |
155 | * GPIO 1-2: SMSC9118 interrupt line | |
156 | */ | |
157 | mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO)); | |
158 | gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2), "smsc9118-int"); | |
159 | gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2)); | |
160 | ||
161 | return platform_device_register(&kzm_smsc9118_device); | |
162 | } | |
163 | #else | |
164 | static inline int kzm_init_smsc9118(void) | |
165 | { | |
166 | return 0; | |
167 | } | |
168 | #endif | |
169 | ||
170 | #if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) | |
171 | static struct imxuart_platform_data uart_pdata = { | |
172 | .flags = IMXUART_HAVE_RTSCTS, | |
173 | }; | |
174 | ||
175 | static void __init kzm_init_imx_uart(void) | |
176 | { | |
177 | mxc_register_device(&mxc_uart_device0, &uart_pdata); | |
178 | ||
179 | mxc_register_device(&mxc_uart_device1, &uart_pdata); | |
180 | } | |
181 | #else | |
182 | static inline void kzm_init_imx_uart(void) | |
183 | { | |
184 | } | |
185 | #endif | |
186 | ||
187 | static int kzm_pins[] __initdata = { | |
188 | MX31_PIN_CTS1__CTS1, | |
189 | MX31_PIN_RTS1__RTS1, | |
190 | MX31_PIN_TXD1__TXD1, | |
191 | MX31_PIN_RXD1__RXD1, | |
192 | MX31_PIN_DCD_DCE1__DCD_DCE1, | |
193 | MX31_PIN_RI_DCE1__RI_DCE1, | |
194 | MX31_PIN_DSR_DCE1__DSR_DCE1, | |
195 | MX31_PIN_DTR_DCE1__DTR_DCE1, | |
196 | MX31_PIN_CTS2__CTS2, | |
197 | MX31_PIN_RTS2__RTS2, | |
198 | MX31_PIN_TXD2__TXD2, | |
199 | MX31_PIN_RXD2__RXD2, | |
200 | MX31_PIN_DCD_DTE1__DCD_DTE2, | |
201 | MX31_PIN_RI_DTE1__RI_DTE2, | |
202 | MX31_PIN_DSR_DTE1__DSR_DTE2, | |
203 | MX31_PIN_DTR_DTE1__DTR_DTE2, | |
204 | }; | |
205 | ||
206 | /* | |
207 | * Board specific initialization. | |
208 | */ | |
209 | static void __init kzm_board_init(void) | |
210 | { | |
211 | mxc_iomux_setup_multiple_pins(kzm_pins, | |
212 | ARRAY_SIZE(kzm_pins), "kzm"); | |
213 | kzm_init_ext_uart(); | |
214 | kzm_init_smsc9118(); | |
215 | kzm_init_imx_uart(); | |
216 | ||
217 | pr_info("Clock input source is 26MHz\n"); | |
218 | } | |
219 | ||
220 | /* | |
221 | * This structure defines static mappings for the kzm-arm11-01 board. | |
222 | */ | |
223 | static struct map_desc kzm_io_desc[] __initdata = { | |
224 | { | |
225 | .virtual = CS4_BASE_ADDR_VIRT, | |
226 | .pfn = __phys_to_pfn(CS4_BASE_ADDR), | |
227 | .length = CS4_SIZE, | |
228 | .type = MT_DEVICE | |
229 | }, | |
230 | { | |
231 | .virtual = CS5_BASE_ADDR_VIRT, | |
232 | .pfn = __phys_to_pfn(CS5_BASE_ADDR), | |
233 | .length = CS5_SIZE, | |
234 | .type = MT_DEVICE | |
235 | }, | |
236 | }; | |
237 | ||
238 | /* | |
239 | * Set up static virtual mappings. | |
240 | */ | |
241 | static void __init kzm_map_io(void) | |
242 | { | |
243 | mx31_map_io(); | |
244 | iotable_init(kzm_io_desc, ARRAY_SIZE(kzm_io_desc)); | |
245 | } | |
246 | ||
247 | static void __init kzm_timer_init(void) | |
248 | { | |
249 | mx31_clocks_init(26000000); | |
250 | } | |
251 | ||
252 | static struct sys_timer kzm_timer = { | |
253 | .init = kzm_timer_init, | |
254 | }; | |
255 | ||
256 | /* | |
257 | * The following uses standard kernel macros define in arch.h in order to | |
258 | * initialize __mach_desc_KZM_ARM11_01 data structure. | |
259 | */ | |
260 | MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01") | |
261 | .phys_io = AIPS1_BASE_ADDR, | |
262 | .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, | |
263 | .boot_params = PHYS_OFFSET + 0x100, | |
264 | .map_io = kzm_map_io, | |
265 | .init_irq = mx31_init_irq, | |
266 | .init_machine = kzm_board_init, | |
267 | .timer = &kzm_timer, | |
268 | MACHINE_END |