[PATCH] ARM: Remove machine description macros
[deliverable/linux.git] / arch / arm / mach-omap / board-voiceblue.c
CommitLineData
1da177e4
LT
1/*
2 * linux/arch/arm/mach-omap/board-voiceblue.c
3 *
4 * Modified from board-generic.c
5 *
6 * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
7 *
8 * Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway).
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13 */
14
15#include <linux/delay.h>
16#include <linux/device.h>
17#include <linux/interrupt.h>
18#include <linux/init.h>
19#include <linux/kernel.h>
20#include <linux/notifier.h>
21#include <linux/reboot.h>
22#include <linux/serial_8250.h>
23#include <linux/serial_reg.h>
24
25#include <asm/hardware.h>
26#include <asm/mach-types.h>
27#include <asm/mach/arch.h>
28#include <asm/mach/map.h>
29
30#include <asm/arch/gpio.h>
31#include <asm/arch/tc.h>
32#include <asm/arch/mux.h>
33#include <asm/arch/usb.h>
34
35#include "common.h"
36
37extern void omap_init_time(void);
38extern int omap_gpio_init(void);
39
40static struct plat_serial8250_port voiceblue_ports[] = {
41 {
42 .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000),
43 .irq = OMAP_GPIO_IRQ(12),
44 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
45 .iotype = UPIO_MEM,
46 .regshift = 1,
47 .uartclk = 3686400,
48 },
49 {
50 .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x50000),
51 .irq = OMAP_GPIO_IRQ(13),
52 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
53 .iotype = UPIO_MEM,
54 .regshift = 1,
55 .uartclk = 3686400,
56 },
57 {
58 .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x60000),
59 .irq = OMAP_GPIO_IRQ(14),
60 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
61 .iotype = UPIO_MEM,
62 .regshift = 1,
63 .uartclk = 3686400,
64 },
65 {
66 .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x70000),
67 .irq = OMAP_GPIO_IRQ(15),
68 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
69 .iotype = UPIO_MEM,
70 .regshift = 1,
71 .uartclk = 3686400,
72 },
73 { },
74};
75
76static struct platform_device serial_device = {
77 .name = "serial8250",
78 .id = 1,
79 .dev = {
80 .platform_data = voiceblue_ports,
81 },
82};
83
84static int __init ext_uart_init(void)
85{
86 return platform_device_register(&serial_device);
87}
88arch_initcall(ext_uart_init);
89
90static struct resource voiceblue_smc91x_resources[] = {
91 [0] = {
92 .start = OMAP_CS2_PHYS + 0x300,
93 .end = OMAP_CS2_PHYS + 0x300 + 16,
94 .flags = IORESOURCE_MEM,
95 },
96 [1] = {
97 .start = OMAP_GPIO_IRQ(8),
98 .end = OMAP_GPIO_IRQ(8),
99 .flags = IORESOURCE_IRQ,
100 },
101};
102
103static struct platform_device voiceblue_smc91x_device = {
104 .name = "smc91x",
105 .id = 0,
106 .num_resources = ARRAY_SIZE(voiceblue_smc91x_resources),
107 .resource = voiceblue_smc91x_resources,
108};
109
110static struct platform_device *voiceblue_devices[] __initdata = {
111 &voiceblue_smc91x_device,
112};
113
114static struct omap_usb_config voiceblue_usb_config __initdata = {
115 .hmc_mode = 3,
116 .register_host = 1,
117 .register_dev = 1,
118 .pins[0] = 2,
119 .pins[1] = 6,
120 .pins[2] = 6,
121};
122
123static struct omap_board_config_kernel voiceblue_config[] = {
124 { OMAP_TAG_USB, &voiceblue_usb_config },
125};
126
127static void __init voiceblue_init_irq(void)
128{
129 omap_init_irq();
130 omap_gpio_init();
131}
132
133static void __init voiceblue_init(void)
134{
135 /* There is a good chance board is going up, so enable Power LED
136 * (it is connected through invertor) */
137 omap_writeb(0x00, OMAP_LPG1_LCR);
138 /* Watchdog */
139 omap_request_gpio(0);
140 /* smc91x reset */
141 omap_request_gpio(7);
142 omap_set_gpio_direction(7, 0);
143 omap_set_gpio_dataout(7, 1);
144 udelay(2); /* wait at least 100ns */
145 omap_set_gpio_dataout(7, 0);
146 mdelay(50); /* 50ms until PHY ready */
147 /* smc91x interrupt pin */
148 omap_request_gpio(8);
149 omap_set_gpio_edge_ctrl(8, OMAP_GPIO_RISING_EDGE);
150 /* 16C554 reset*/
151 omap_request_gpio(6);
152 omap_set_gpio_direction(6, 0);
153 omap_set_gpio_dataout(6, 0);
154 /* 16C554 interrupt pins */
155 omap_request_gpio(12);
156 omap_request_gpio(13);
157 omap_request_gpio(14);
158 omap_request_gpio(15);
159 omap_set_gpio_edge_ctrl(12, OMAP_GPIO_RISING_EDGE);
160 omap_set_gpio_edge_ctrl(13, OMAP_GPIO_RISING_EDGE);
161 omap_set_gpio_edge_ctrl(14, OMAP_GPIO_RISING_EDGE);
162 omap_set_gpio_edge_ctrl(15, OMAP_GPIO_RISING_EDGE);
163
164 platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
165 omap_board_config = voiceblue_config;
166 omap_board_config_size = ARRAY_SIZE(voiceblue_config);
167}
168
169static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
170
171static void __init voiceblue_map_io(void)
172{
173 omap_map_io();
174 omap_serial_init(omap_serial_ports);
175}
176
177#define MACHINE_PANICED 1
178#define MACHINE_REBOOTING 2
179#define MACHINE_REBOOT 4
180static unsigned long machine_state;
181
182static int panic_event(struct notifier_block *this, unsigned long event,
183 void *ptr)
184{
185 if (test_and_set_bit(MACHINE_PANICED, &machine_state))
186 return NOTIFY_DONE;
187
188 /* Flash Power LED
189 * (TODO: Enable clock right way (enabled in bootloader already)) */
190 omap_writeb(0x78, OMAP_LPG1_LCR);
191
192 return NOTIFY_DONE;
193}
194
195static struct notifier_block panic_block = {
196 .notifier_call = panic_event,
197};
198
199static int __init setup_notifier(void)
200{
201 /* Setup panic notifier */
202 notifier_chain_register(&panic_notifier_list, &panic_block);
203
204 return 0;
205}
206
207postcore_initcall(setup_notifier);
208
209static int wdt_gpio_state;
210
211void voiceblue_wdt_enable(void)
212{
213 omap_set_gpio_direction(0, 0);
214 omap_set_gpio_dataout(0, 0);
215 omap_set_gpio_dataout(0, 1);
216 omap_set_gpio_dataout(0, 0);
217 wdt_gpio_state = 0;
218}
219
220void voiceblue_wdt_disable(void)
221{
222 omap_set_gpio_dataout(0, 0);
223 omap_set_gpio_dataout(0, 1);
224 omap_set_gpio_dataout(0, 0);
225 omap_set_gpio_direction(0, 1);
226}
227
228void voiceblue_wdt_ping(void)
229{
230 if (test_bit(MACHINE_REBOOT, &machine_state))
231 return;
232
233 wdt_gpio_state = !wdt_gpio_state;
234 omap_set_gpio_dataout(0, wdt_gpio_state);
235}
236
237void voiceblue_reset(void)
238{
239 set_bit(MACHINE_REBOOT, &machine_state);
240 voiceblue_wdt_enable();
241 while (1) ;
242}
243
244EXPORT_SYMBOL(voiceblue_wdt_enable);
245EXPORT_SYMBOL(voiceblue_wdt_disable);
246EXPORT_SYMBOL(voiceblue_wdt_ping);
247
248MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
e9dea0c6
RK
249 /* Maintainer: Ladislav Michl <michl@2n.cz> */
250 .phys_ram = 0x10000000,
251 .phys_io = 0xfff00000,
252 .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
253 .boot_params = 0x10000100,
254 .map_io = voiceblue_map_io,
255 .init_irq = voiceblue_init_irq,
256 .init_machine = voiceblue_init,
257 .timer = &omap_timer,
1da177e4 258MACHINE_END
This page took 0.043456 seconds and 5 git commands to generate.