Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
dbdf9ced | 2 | * linux/arch/arm/mach-omap1/board-h2.c |
1da177e4 LT |
3 | * |
4 | * Board specific inits for OMAP-1610 H2 | |
5 | * | |
6 | * Copyright (C) 2001 RidgeRun, Inc. | |
7 | * Author: Greg Lonnon <glonnon@ridgerun.com> | |
8 | * | |
9 | * Copyright (C) 2002 MontaVista Software, Inc. | |
10 | * | |
11 | * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 | |
12 | * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com> | |
13 | * | |
14 | * H2 specific changes and cleanup | |
15 | * Copyright (C) 2004 Nokia Corporation by Imre Deak <imre.deak@nokia.com> | |
16 | * | |
17 | * This program is free software; you can redistribute it and/or modify | |
18 | * it under the terms of the GNU General Public License version 2 as | |
19 | * published by the Free Software Foundation. | |
20 | */ | |
21 | ||
22 | #include <linux/kernel.h> | |
d052d1be | 23 | #include <linux/platform_device.h> |
1da177e4 | 24 | #include <linux/delay.h> |
8056c6cb | 25 | #include <linux/i2c.h> |
1da177e4 | 26 | #include <linux/mtd/mtd.h> |
9b6553cd | 27 | #include <linux/mtd/nand.h> |
1da177e4 | 28 | #include <linux/mtd/partitions.h> |
9b6553cd | 29 | #include <linux/input.h> |
6d16bfb5 | 30 | #include <linux/i2c/tps65010.h> |
1da177e4 LT |
31 | |
32 | #include <asm/hardware.h> | |
8056c6cb DB |
33 | #include <asm/gpio.h> |
34 | ||
1da177e4 LT |
35 | #include <asm/mach-types.h> |
36 | #include <asm/mach/arch.h> | |
37 | #include <asm/mach/flash.h> | |
38 | #include <asm/mach/map.h> | |
39 | ||
e27a93a9 | 40 | #include <asm/arch/gpio-switch.h> |
7c38cf02 | 41 | #include <asm/arch/mux.h> |
1da177e4 | 42 | #include <asm/arch/tc.h> |
78be6325 | 43 | #include <asm/arch/nand.h> |
9b6553cd | 44 | #include <asm/arch/irda.h> |
1da177e4 | 45 | #include <asm/arch/usb.h> |
9b6553cd | 46 | #include <asm/arch/keypad.h> |
d48af15e | 47 | #include <asm/arch/common.h> |
9b6553cd TL |
48 | #include <asm/arch/mcbsp.h> |
49 | #include <asm/arch/omap-alsa.h> | |
1da177e4 | 50 | |
9b6553cd TL |
51 | static int h2_keymap[] = { |
52 | KEY(0, 0, KEY_LEFT), | |
53 | KEY(0, 1, KEY_RIGHT), | |
54 | KEY(0, 2, KEY_3), | |
55 | KEY(0, 3, KEY_F10), | |
56 | KEY(0, 4, KEY_F5), | |
57 | KEY(0, 5, KEY_9), | |
58 | KEY(1, 0, KEY_DOWN), | |
59 | KEY(1, 1, KEY_UP), | |
60 | KEY(1, 2, KEY_2), | |
61 | KEY(1, 3, KEY_F9), | |
62 | KEY(1, 4, KEY_F7), | |
63 | KEY(1, 5, KEY_0), | |
64 | KEY(2, 0, KEY_ENTER), | |
65 | KEY(2, 1, KEY_6), | |
66 | KEY(2, 2, KEY_1), | |
67 | KEY(2, 3, KEY_F2), | |
68 | KEY(2, 4, KEY_F6), | |
69 | KEY(2, 5, KEY_HOME), | |
70 | KEY(3, 0, KEY_8), | |
71 | KEY(3, 1, KEY_5), | |
72 | KEY(3, 2, KEY_F12), | |
73 | KEY(3, 3, KEY_F3), | |
74 | KEY(3, 4, KEY_F8), | |
75 | KEY(3, 5, KEY_END), | |
76 | KEY(4, 0, KEY_7), | |
77 | KEY(4, 1, KEY_4), | |
78 | KEY(4, 2, KEY_F11), | |
79 | KEY(4, 3, KEY_F1), | |
80 | KEY(4, 4, KEY_F4), | |
81 | KEY(4, 5, KEY_ESC), | |
82 | KEY(5, 0, KEY_F13), | |
83 | KEY(5, 1, KEY_F14), | |
84 | KEY(5, 2, KEY_F15), | |
85 | KEY(5, 3, KEY_F16), | |
86 | KEY(5, 4, KEY_SLEEP), | |
87 | 0 | |
88 | }; | |
89 | ||
90 | static struct mtd_partition h2_nor_partitions[] = { | |
1da177e4 LT |
91 | /* bootloader (U-Boot, etc) in first sector */ |
92 | { | |
93 | .name = "bootloader", | |
94 | .offset = 0, | |
95 | .size = SZ_128K, | |
96 | .mask_flags = MTD_WRITEABLE, /* force read-only */ | |
97 | }, | |
98 | /* bootloader params in the next sector */ | |
99 | { | |
100 | .name = "params", | |
101 | .offset = MTDPART_OFS_APPEND, | |
102 | .size = SZ_128K, | |
103 | .mask_flags = 0, | |
104 | }, | |
105 | /* kernel */ | |
106 | { | |
107 | .name = "kernel", | |
108 | .offset = MTDPART_OFS_APPEND, | |
109 | .size = SZ_2M, | |
110 | .mask_flags = 0 | |
111 | }, | |
112 | /* file system */ | |
113 | { | |
114 | .name = "filesystem", | |
115 | .offset = MTDPART_OFS_APPEND, | |
116 | .size = MTDPART_SIZ_FULL, | |
117 | .mask_flags = 0 | |
118 | } | |
119 | }; | |
120 | ||
9b6553cd | 121 | static struct flash_platform_data h2_nor_data = { |
1da177e4 LT |
122 | .map_name = "cfi_probe", |
123 | .width = 2, | |
9b6553cd TL |
124 | .parts = h2_nor_partitions, |
125 | .nr_parts = ARRAY_SIZE(h2_nor_partitions), | |
1da177e4 LT |
126 | }; |
127 | ||
9b6553cd | 128 | static struct resource h2_nor_resource = { |
7c38cf02 | 129 | /* This is on CS3, wherever it's mapped */ |
1da177e4 LT |
130 | .flags = IORESOURCE_MEM, |
131 | }; | |
132 | ||
9b6553cd | 133 | static struct platform_device h2_nor_device = { |
1da177e4 LT |
134 | .name = "omapflash", |
135 | .id = 0, | |
136 | .dev = { | |
9b6553cd | 137 | .platform_data = &h2_nor_data, |
1da177e4 LT |
138 | }, |
139 | .num_resources = 1, | |
9b6553cd | 140 | .resource = &h2_nor_resource, |
1da177e4 LT |
141 | }; |
142 | ||
a524626b TL |
143 | static struct mtd_partition h2_nand_partitions[] = { |
144 | #if 0 | |
145 | /* REVISIT: enable these partitions if you make NAND BOOT | |
146 | * work on your H2 (rev C or newer); published versions of | |
147 | * x-load only support P2 and H3. | |
148 | */ | |
149 | { | |
150 | .name = "xloader", | |
151 | .offset = 0, | |
152 | .size = 64 * 1024, | |
153 | .mask_flags = MTD_WRITEABLE, /* force read-only */ | |
154 | }, | |
155 | { | |
156 | .name = "bootloader", | |
157 | .offset = MTDPART_OFS_APPEND, | |
158 | .size = 256 * 1024, | |
159 | .mask_flags = MTD_WRITEABLE, /* force read-only */ | |
160 | }, | |
161 | { | |
162 | .name = "params", | |
163 | .offset = MTDPART_OFS_APPEND, | |
164 | .size = 192 * 1024, | |
165 | }, | |
166 | { | |
167 | .name = "kernel", | |
168 | .offset = MTDPART_OFS_APPEND, | |
169 | .size = 2 * SZ_1M, | |
170 | }, | |
171 | #endif | |
172 | { | |
173 | .name = "filesystem", | |
174 | .size = MTDPART_SIZ_FULL, | |
175 | .offset = MTDPART_OFS_APPEND, | |
176 | }, | |
177 | }; | |
178 | ||
179 | /* dip switches control NAND chip access: 8 bit, 16 bit, or neither */ | |
78be6325 | 180 | static struct omap_nand_platform_data h2_nand_data = { |
a524626b TL |
181 | .options = NAND_SAMSUNG_LP_OPTIONS, |
182 | .parts = h2_nand_partitions, | |
183 | .nr_parts = ARRAY_SIZE(h2_nand_partitions), | |
184 | }; | |
185 | ||
186 | static struct resource h2_nand_resource = { | |
187 | .flags = IORESOURCE_MEM, | |
188 | }; | |
189 | ||
190 | static struct platform_device h2_nand_device = { | |
191 | .name = "omapnand", | |
192 | .id = 0, | |
193 | .dev = { | |
194 | .platform_data = &h2_nand_data, | |
195 | }, | |
196 | .num_resources = 1, | |
197 | .resource = &h2_nand_resource, | |
198 | }; | |
a524626b | 199 | |
1da177e4 LT |
200 | static struct resource h2_smc91x_resources[] = { |
201 | [0] = { | |
202 | .start = OMAP1610_ETHR_START, /* Physical */ | |
203 | .end = OMAP1610_ETHR_START + 0xf, | |
204 | .flags = IORESOURCE_MEM, | |
205 | }, | |
206 | [1] = { | |
207 | .start = OMAP_GPIO_IRQ(0), | |
208 | .end = OMAP_GPIO_IRQ(0), | |
e7b3dc7e | 209 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, |
1da177e4 LT |
210 | }, |
211 | }; | |
212 | ||
213 | static struct platform_device h2_smc91x_device = { | |
214 | .name = "smc91x", | |
215 | .id = 0, | |
216 | .num_resources = ARRAY_SIZE(h2_smc91x_resources), | |
217 | .resource = h2_smc91x_resources, | |
218 | }; | |
219 | ||
9b6553cd TL |
220 | static struct resource h2_kp_resources[] = { |
221 | [0] = { | |
222 | .start = INT_KEYBOARD, | |
223 | .end = INT_KEYBOARD, | |
224 | .flags = IORESOURCE_IRQ, | |
225 | }, | |
226 | }; | |
227 | ||
228 | static struct omap_kp_platform_data h2_kp_data = { | |
4d24607b KS |
229 | .rows = 8, |
230 | .cols = 8, | |
231 | .keymap = h2_keymap, | |
232 | .keymapsize = ARRAY_SIZE(h2_keymap), | |
233 | .rep = 1, | |
234 | .delay = 9, | |
235 | .dbounce = 1, | |
9b6553cd TL |
236 | }; |
237 | ||
238 | static struct platform_device h2_kp_device = { | |
239 | .name = "omap-keypad", | |
240 | .id = -1, | |
241 | .dev = { | |
242 | .platform_data = &h2_kp_data, | |
243 | }, | |
244 | .num_resources = ARRAY_SIZE(h2_kp_resources), | |
245 | .resource = h2_kp_resources, | |
246 | }; | |
247 | ||
248 | #define H2_IRDA_FIRSEL_GPIO_PIN 17 | |
249 | ||
250 | #if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE) | |
251 | static int h2_transceiver_mode(struct device *dev, int state) | |
252 | { | |
253 | if (state & IR_SIRMODE) | |
254 | omap_set_gpio_dataout(H2_IRDA_FIRSEL_GPIO_PIN, 0); | |
255 | else /* MIR/FIR */ | |
256 | omap_set_gpio_dataout(H2_IRDA_FIRSEL_GPIO_PIN, 1); | |
257 | ||
258 | return 0; | |
259 | } | |
260 | #endif | |
261 | ||
262 | static struct omap_irda_config h2_irda_data = { | |
263 | .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE, | |
264 | .rx_channel = OMAP_DMA_UART3_RX, | |
265 | .tx_channel = OMAP_DMA_UART3_TX, | |
266 | .dest_start = UART3_THR, | |
267 | .src_start = UART3_RHR, | |
268 | .tx_trigger = 0, | |
269 | .rx_trigger = 0, | |
270 | }; | |
271 | ||
272 | static struct resource h2_irda_resources[] = { | |
273 | [0] = { | |
274 | .start = INT_UART3, | |
275 | .end = INT_UART3, | |
276 | .flags = IORESOURCE_IRQ, | |
277 | }, | |
278 | }; | |
a524626b TL |
279 | |
280 | static u64 irda_dmamask = 0xffffffff; | |
281 | ||
9b6553cd TL |
282 | static struct platform_device h2_irda_device = { |
283 | .name = "omapirda", | |
284 | .id = 0, | |
285 | .dev = { | |
286 | .platform_data = &h2_irda_data, | |
a524626b | 287 | .dma_mask = &irda_dmamask, |
9b6553cd TL |
288 | }, |
289 | .num_resources = ARRAY_SIZE(h2_irda_resources), | |
290 | .resource = h2_irda_resources, | |
291 | }; | |
292 | ||
293 | static struct platform_device h2_lcd_device = { | |
294 | .name = "lcd_h2", | |
295 | .id = -1, | |
296 | }; | |
297 | ||
298 | static struct omap_mcbsp_reg_cfg mcbsp_regs = { | |
299 | .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), | |
300 | .spcr1 = RINTM(3) | RRST, | |
301 | .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | | |
302 | RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1), | |
303 | .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16), | |
304 | .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | | |
305 | XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG, | |
306 | .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16), | |
307 | .srgr1 = FWID(15), | |
308 | .srgr2 = GSYNC | CLKSP | FSGM | FPER(31), | |
309 | ||
310 | .pcr0 = CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP, | |
6e2d4107 | 311 | /*.pcr0 = CLKXP | CLKRP,*/ /* mcbsp: slave */ |
9b6553cd TL |
312 | }; |
313 | ||
314 | static struct omap_alsa_codec_config alsa_config = { | |
315 | .name = "H2 TSC2101", | |
316 | .mcbsp_regs_alsa = &mcbsp_regs, | |
6e2d4107 DC |
317 | .codec_configure_dev = NULL, /* tsc2101_configure, */ |
318 | .codec_set_samplerate = NULL, /* tsc2101_set_samplerate, */ | |
319 | .codec_clock_setup = NULL, /* tsc2101_clock_setup, */ | |
320 | .codec_clock_on = NULL, /* tsc2101_clock_on, */ | |
321 | .codec_clock_off = NULL, /* tsc2101_clock_off, */ | |
322 | .get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */ | |
9b6553cd TL |
323 | }; |
324 | ||
325 | static struct platform_device h2_mcbsp1_device = { | |
326 | .name = "omap_alsa_mcbsp", | |
327 | .id = 1, | |
328 | .dev = { | |
329 | .platform_data = &alsa_config, | |
330 | }, | |
331 | }; | |
332 | ||
1da177e4 | 333 | static struct platform_device *h2_devices[] __initdata = { |
9b6553cd | 334 | &h2_nor_device, |
78be6325 | 335 | &h2_nand_device, |
1da177e4 | 336 | &h2_smc91x_device, |
9b6553cd TL |
337 | &h2_irda_device, |
338 | &h2_kp_device, | |
339 | &h2_lcd_device, | |
340 | &h2_mcbsp1_device, | |
1da177e4 LT |
341 | }; |
342 | ||
343 | static void __init h2_init_smc91x(void) | |
344 | { | |
345 | if ((omap_request_gpio(0)) < 0) { | |
346 | printk("Error requesting gpio 0 for smc91x irq\n"); | |
347 | return; | |
348 | } | |
1da177e4 LT |
349 | } |
350 | ||
e27a93a9 TL |
351 | static struct i2c_board_info __initdata h2_i2c_board_info[] = { |
352 | { | |
9221bb1c DB |
353 | I2C_BOARD_INFO("tps65010", 0x48), |
354 | .type = "tps65010", | |
355 | .irq = OMAP_GPIO_IRQ(58), | |
356 | }, { | |
e27a93a9 TL |
357 | I2C_BOARD_INFO("isp1301_omap", 0x2d), |
358 | .type = "isp1301_omap", | |
359 | .irq = OMAP_GPIO_IRQ(2), | |
360 | }, | |
361 | }; | |
362 | ||
7c38cf02 | 363 | static void __init h2_init_irq(void) |
1da177e4 | 364 | { |
87bd63f6 | 365 | omap1_init_common_hw(); |
1da177e4 LT |
366 | omap_init_irq(); |
367 | omap_gpio_init(); | |
368 | h2_init_smc91x(); | |
369 | } | |
370 | ||
371 | static struct omap_usb_config h2_usb_config __initdata = { | |
372 | /* usb1 has a Mini-AB port and external isp1301 transceiver */ | |
373 | .otg = 2, | |
374 | ||
375 | #ifdef CONFIG_USB_GADGET_OMAP | |
6e2d4107 DC |
376 | .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ |
377 | /* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */ | |
1da177e4 LT |
378 | #elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) |
379 | /* needs OTG cable, or NONSTANDARD (B-to-MiniB) */ | |
6e2d4107 | 380 | .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */ |
1da177e4 LT |
381 | #endif |
382 | ||
383 | .pins[1] = 3, | |
384 | }; | |
385 | ||
386 | static struct omap_mmc_config h2_mmc_config __initdata = { | |
138ab9f8 FB |
387 | .mmc[0] = { |
388 | .enabled = 1, | |
7c38cf02 | 389 | .wire4 = 1, |
7c38cf02 | 390 | }, |
1da177e4 LT |
391 | }; |
392 | ||
138ab9f8 FB |
393 | extern struct omap_mmc_platform_data h2_mmc_data; |
394 | ||
3179a019 TL |
395 | static struct omap_uart_config h2_uart_config __initdata = { |
396 | .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), | |
397 | }; | |
398 | ||
399 | static struct omap_lcd_config h2_lcd_config __initdata = { | |
3179a019 TL |
400 | .ctrl_name = "internal", |
401 | }; | |
402 | ||
e3318fb4 | 403 | static struct omap_board_config_kernel h2_config[] __initdata = { |
78be6325 TL |
404 | { OMAP_TAG_USB, &h2_usb_config }, |
405 | { OMAP_TAG_MMC, &h2_mmc_config }, | |
3179a019 TL |
406 | { OMAP_TAG_UART, &h2_uart_config }, |
407 | { OMAP_TAG_LCD, &h2_lcd_config }, | |
1da177e4 LT |
408 | }; |
409 | ||
a524626b TL |
410 | #define H2_NAND_RB_GPIO_PIN 62 |
411 | ||
78be6325 | 412 | static int h2_nand_dev_ready(struct omap_nand_platform_data *data) |
a524626b TL |
413 | { |
414 | return omap_get_gpio_datain(H2_NAND_RB_GPIO_PIN); | |
415 | } | |
416 | ||
1da177e4 LT |
417 | static void __init h2_init(void) |
418 | { | |
9b6553cd TL |
419 | /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped |
420 | * to address 0 by a dip switch), NAND on CS2B. The NAND driver will | |
421 | * notice whether a NAND chip is enabled at probe time. | |
422 | * | |
423 | * FIXME revC boards (and H3) support NAND-boot, with a dip switch to | |
424 | * put NOR on CS2B and NAND (which on H2 may be 16bit) on CS3. Try | |
425 | * detecting that in code here, to avoid probing every possible flash | |
426 | * configuration... | |
7c38cf02 | 427 | */ |
9b6553cd TL |
428 | h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys(); |
429 | h2_nor_resource.end += SZ_32M - 1; | |
430 | ||
a524626b TL |
431 | h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS; |
432 | h2_nand_resource.end += SZ_4K - 1; | |
433 | if (!(omap_request_gpio(H2_NAND_RB_GPIO_PIN))) | |
434 | h2_nand_data.dev_ready = h2_nand_dev_ready; | |
a524626b | 435 | |
9b6553cd TL |
436 | omap_cfg_reg(L3_1610_FLASH_CS2B_OE); |
437 | omap_cfg_reg(M8_1610_FLASH_CS2B_WE); | |
7c38cf02 TL |
438 | |
439 | /* MMC: card detect and WP */ | |
6e2d4107 | 440 | /* omap_cfg_reg(U19_ARMIO1); */ /* CD */ |
7c38cf02 TL |
441 | omap_cfg_reg(BALLOUT_V8_ARMIO3); /* WP */ |
442 | ||
9b6553cd TL |
443 | /* Irda */ |
444 | #if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE) | |
445 | omap_writel(omap_readl(FUNC_MUX_CTRL_A) | 7, FUNC_MUX_CTRL_A); | |
446 | if (!(omap_request_gpio(H2_IRDA_FIRSEL_GPIO_PIN))) { | |
447 | omap_set_gpio_direction(H2_IRDA_FIRSEL_GPIO_PIN, 0); | |
448 | h2_irda_data.transceiver_mode = h2_transceiver_mode; | |
449 | } | |
450 | #endif | |
451 | ||
1da177e4 LT |
452 | platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices)); |
453 | omap_board_config = h2_config; | |
454 | omap_board_config_size = ARRAY_SIZE(h2_config); | |
3179a019 | 455 | omap_serial_init(); |
1ed16a86 JN |
456 | omap_register_i2c_bus(1, 100, h2_i2c_board_info, |
457 | ARRAY_SIZE(h2_i2c_board_info)); | |
138ab9f8 | 458 | h2_mmc_init(); |
1da177e4 LT |
459 | } |
460 | ||
461 | static void __init h2_map_io(void) | |
462 | { | |
87bd63f6 | 463 | omap1_map_common_io(); |
1da177e4 LT |
464 | } |
465 | ||
466 | MACHINE_START(OMAP_H2, "TI-H2") | |
e9dea0c6 | 467 | /* Maintainer: Imre Deak <imre.deak@nokia.com> */ |
e9dea0c6 RK |
468 | .phys_io = 0xfff00000, |
469 | .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, | |
470 | .boot_params = 0x10000100, | |
471 | .map_io = h2_map_io, | |
472 | .init_irq = h2_init_irq, | |
473 | .init_machine = h2_init, | |
1da177e4 LT |
474 | .timer = &omap_timer, |
475 | MACHINE_END |