Commit | Line | Data |
---|---|---|
555a3656 | 1 | /* |
9dd0b194 | 2 | * arch/arm/mach-orion5x/dns323-setup.c |
555a3656 HVR |
3 | * |
4 | * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org> | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify | |
7 | * it under the terms of the GNU Lesser General Public License as | |
8 | * published by the Free Software Foundation; either version 2 of the | |
9 | * License, or (at your option) any later version. | |
10 | * | |
11 | */ | |
12 | ||
13 | #include <linux/kernel.h> | |
14 | #include <linux/init.h> | |
15 | #include <linux/platform_device.h> | |
16 | #include <linux/pci.h> | |
17 | #include <linux/irq.h> | |
18 | #include <linux/mtd/physmap.h> | |
19 | #include <linux/mv643xx_eth.h> | |
20 | #include <linux/leds.h> | |
21 | #include <linux/gpio_keys.h> | |
22 | #include <linux/input.h> | |
23 | #include <linux/i2c.h> | |
f93e4159 | 24 | #include <linux/ata_platform.h> |
555a3656 HVR |
25 | #include <asm/mach-types.h> |
26 | #include <asm/gpio.h> | |
27 | #include <asm/mach/arch.h> | |
28 | #include <asm/mach/pci.h> | |
a09e64fb | 29 | #include <mach/orion5x.h> |
555a3656 | 30 | #include "common.h" |
19cfd5c0 | 31 | #include "mpp.h" |
555a3656 HVR |
32 | |
33 | #define DNS323_GPIO_LED_RIGHT_AMBER 1 | |
34 | #define DNS323_GPIO_LED_LEFT_AMBER 2 | |
35 | #define DNS323_GPIO_LED_POWER 5 | |
36 | #define DNS323_GPIO_OVERTEMP 6 | |
37 | #define DNS323_GPIO_RTC 7 | |
38 | #define DNS323_GPIO_POWER_OFF 8 | |
39 | #define DNS323_GPIO_KEY_POWER 9 | |
40 | #define DNS323_GPIO_KEY_RESET 10 | |
41 | ||
42 | /**************************************************************************** | |
43 | * PCI setup | |
44 | */ | |
45 | ||
46 | static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) | |
47 | { | |
92b913b0 | 48 | int irq; |
555a3656 | 49 | |
92b913b0 LB |
50 | /* |
51 | * Check for devices with hard-wired IRQs. | |
52 | */ | |
53 | irq = orion5x_pci_map_irq(dev, slot, pin); | |
54 | if (irq != -1) | |
55 | return irq; | |
56 | ||
555a3656 HVR |
57 | return -1; |
58 | } | |
59 | ||
60 | static struct hw_pci dns323_pci __initdata = { | |
bbdf1c1e | 61 | .nr_controllers = 2, |
555a3656 | 62 | .swizzle = pci_std_swizzle, |
9dd0b194 LB |
63 | .setup = orion5x_pci_sys_setup, |
64 | .scan = orion5x_pci_sys_scan_bus, | |
555a3656 HVR |
65 | .map_irq = dns323_pci_map_irq, |
66 | }; | |
67 | ||
f93e4159 MP |
68 | static int __init dns323_dev_id(void) |
69 | { | |
70 | u32 dev, rev; | |
71 | ||
72 | orion5x_pcie_id(&dev, &rev); | |
73 | ||
74 | return dev; | |
75 | } | |
76 | ||
555a3656 HVR |
77 | static int __init dns323_pci_init(void) |
78 | { | |
ace14b82 | 79 | /* The 5182 doesn't really use its PCI bus, and initialising PCI |
f93e4159 MP |
80 | * gets in the way of initialising the SATA controller. |
81 | */ | |
82 | if (machine_is_dns323() && dns323_dev_id() != MV88F5182_DEV_ID) | |
555a3656 HVR |
83 | pci_common_init(&dns323_pci); |
84 | ||
85 | return 0; | |
86 | } | |
87 | ||
88 | subsys_initcall(dns323_pci_init); | |
89 | ||
555a3656 HVR |
90 | /**************************************************************************** |
91 | * 8MiB NOR flash (Spansion S29GL064M90TFIR4) | |
92 | * | |
93 | * Layout as used by D-Link: | |
94 | * 0x00000000-0x00010000 : "MTD1" | |
95 | * 0x00010000-0x00020000 : "MTD2" | |
96 | * 0x00020000-0x001a0000 : "Linux Kernel" | |
97 | * 0x001a0000-0x007d0000 : "File System" | |
98 | * 0x007d0000-0x00800000 : "u-boot" | |
99 | */ | |
100 | ||
101 | #define DNS323_NOR_BOOT_BASE 0xf4000000 | |
102 | #define DNS323_NOR_BOOT_SIZE SZ_8M | |
103 | ||
104 | static struct mtd_partition dns323_partitions[] = { | |
105 | { | |
106 | .name = "MTD1", | |
107 | .size = 0x00010000, | |
108 | .offset = 0, | |
109 | }, { | |
110 | .name = "MTD2", | |
111 | .size = 0x00010000, | |
112 | .offset = 0x00010000, | |
113 | }, { | |
114 | .name = "Linux Kernel", | |
115 | .size = 0x00180000, | |
116 | .offset = 0x00020000, | |
117 | }, { | |
118 | .name = "File System", | |
119 | .size = 0x00630000, | |
120 | .offset = 0x001A0000, | |
121 | }, { | |
122 | .name = "u-boot", | |
123 | .size = 0x00030000, | |
124 | .offset = 0x007d0000, | |
e7068ad3 | 125 | }, |
555a3656 HVR |
126 | }; |
127 | ||
128 | static struct physmap_flash_data dns323_nor_flash_data = { | |
129 | .width = 1, | |
130 | .parts = dns323_partitions, | |
131 | .nr_parts = ARRAY_SIZE(dns323_partitions) | |
132 | }; | |
133 | ||
134 | static struct resource dns323_nor_flash_resource = { | |
135 | .flags = IORESOURCE_MEM, | |
136 | .start = DNS323_NOR_BOOT_BASE, | |
137 | .end = DNS323_NOR_BOOT_BASE + DNS323_NOR_BOOT_SIZE - 1, | |
138 | }; | |
139 | ||
140 | static struct platform_device dns323_nor_flash = { | |
141 | .name = "physmap-flash", | |
142 | .id = 0, | |
e7068ad3 LB |
143 | .dev = { |
144 | .platform_data = &dns323_nor_flash_data, | |
145 | }, | |
555a3656 HVR |
146 | .resource = &dns323_nor_flash_resource, |
147 | .num_resources = 1, | |
148 | }; | |
149 | ||
a93f44c1 MP |
150 | /**************************************************************************** |
151 | * Ethernet | |
152 | */ | |
153 | ||
154 | static struct mv643xx_eth_platform_data dns323_eth_data = { | |
155 | .phy_addr = MV643XX_ETH_PHY_ADDR(8), | |
156 | }; | |
157 | ||
158 | /* dns323_parse_hex_*() taken from tsx09-common.c; should a common copy of these | |
159 | * functions be kept somewhere? | |
160 | */ | |
161 | static int __init dns323_parse_hex_nibble(char n) | |
162 | { | |
163 | if (n >= '0' && n <= '9') | |
164 | return n - '0'; | |
165 | ||
166 | if (n >= 'A' && n <= 'F') | |
167 | return n - 'A' + 10; | |
168 | ||
169 | if (n >= 'a' && n <= 'f') | |
170 | return n - 'a' + 10; | |
171 | ||
172 | return -1; | |
173 | } | |
174 | ||
175 | static int __init dns323_parse_hex_byte(const char *b) | |
176 | { | |
177 | int hi; | |
178 | int lo; | |
179 | ||
180 | hi = dns323_parse_hex_nibble(b[0]); | |
181 | lo = dns323_parse_hex_nibble(b[1]); | |
182 | ||
183 | if (hi < 0 || lo < 0) | |
184 | return -1; | |
185 | ||
186 | return (hi << 4) | lo; | |
187 | } | |
188 | ||
189 | static int __init dns323_read_mac_addr(void) | |
190 | { | |
191 | u_int8_t addr[6]; | |
192 | int i; | |
193 | char *mac_page; | |
194 | ||
195 | /* MAC address is stored as a regular ol' string in /dev/mtdblock4 | |
196 | * (0x007d0000-0x00800000) starting at offset 196480 (0x2ff80). | |
197 | */ | |
198 | mac_page = ioremap(DNS323_NOR_BOOT_BASE + 0x7d0000 + 196480, 1024); | |
199 | if (!mac_page) | |
200 | return -ENOMEM; | |
201 | ||
202 | /* Sanity check the string we're looking at */ | |
203 | for (i = 0; i < 5; i++) { | |
204 | if (*(mac_page + (i * 3) + 2) != ':') { | |
205 | goto error_fail; | |
206 | } | |
207 | } | |
208 | ||
209 | for (i = 0; i < 6; i++) { | |
210 | int byte; | |
211 | ||
212 | byte = dns323_parse_hex_byte(mac_page + (i * 3)); | |
213 | if (byte < 0) { | |
214 | goto error_fail; | |
215 | } | |
216 | ||
217 | addr[i] = byte; | |
218 | } | |
219 | ||
220 | iounmap(mac_page); | |
221 | printk("DNS323: Found ethernet MAC address: "); | |
222 | for (i = 0; i < 6; i++) | |
223 | printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n"); | |
224 | ||
225 | memcpy(dns323_eth_data.mac_addr, addr, 6); | |
226 | ||
227 | return 0; | |
228 | ||
229 | error_fail: | |
230 | iounmap(mac_page); | |
231 | return -EINVAL; | |
232 | } | |
233 | ||
555a3656 HVR |
234 | /**************************************************************************** |
235 | * GPIO LEDs (simple - doesn't use hardware blinking support) | |
236 | */ | |
237 | ||
238 | static struct gpio_led dns323_leds[] = { | |
239 | { | |
240 | .name = "power:blue", | |
241 | .gpio = DNS323_GPIO_LED_POWER, | |
242 | .active_low = 1, | |
243 | }, { | |
244 | .name = "right:amber", | |
245 | .gpio = DNS323_GPIO_LED_RIGHT_AMBER, | |
246 | .active_low = 1, | |
247 | }, { | |
248 | .name = "left:amber", | |
249 | .gpio = DNS323_GPIO_LED_LEFT_AMBER, | |
250 | .active_low = 1, | |
251 | }, | |
252 | }; | |
253 | ||
254 | static struct gpio_led_platform_data dns323_led_data = { | |
255 | .num_leds = ARRAY_SIZE(dns323_leds), | |
256 | .leds = dns323_leds, | |
257 | }; | |
258 | ||
259 | static struct platform_device dns323_gpio_leds = { | |
260 | .name = "leds-gpio", | |
261 | .id = -1, | |
e7068ad3 LB |
262 | .dev = { |
263 | .platform_data = &dns323_led_data, | |
264 | }, | |
555a3656 HVR |
265 | }; |
266 | ||
267 | /**************************************************************************** | |
268 | * GPIO Attached Keys | |
269 | */ | |
270 | ||
271 | static struct gpio_keys_button dns323_buttons[] = { | |
272 | { | |
273 | .code = KEY_RESTART, | |
274 | .gpio = DNS323_GPIO_KEY_RESET, | |
275 | .desc = "Reset Button", | |
276 | .active_low = 1, | |
e7068ad3 | 277 | }, { |
555a3656 HVR |
278 | .code = KEY_POWER, |
279 | .gpio = DNS323_GPIO_KEY_POWER, | |
280 | .desc = "Power Button", | |
281 | .active_low = 1, | |
e7068ad3 | 282 | }, |
555a3656 HVR |
283 | }; |
284 | ||
285 | static struct gpio_keys_platform_data dns323_button_data = { | |
286 | .buttons = dns323_buttons, | |
e7068ad3 | 287 | .nbuttons = ARRAY_SIZE(dns323_buttons), |
555a3656 HVR |
288 | }; |
289 | ||
290 | static struct platform_device dns323_button_device = { | |
291 | .name = "gpio-keys", | |
292 | .id = -1, | |
293 | .num_resources = 0, | |
e7068ad3 LB |
294 | .dev = { |
295 | .platform_data = &dns323_button_data, | |
296 | }, | |
555a3656 HVR |
297 | }; |
298 | ||
f93e4159 MP |
299 | /***************************************************************************** |
300 | * SATA | |
301 | */ | |
302 | static struct mv_sata_platform_data dns323_sata_data = { | |
303 | .n_ports = 2, | |
304 | }; | |
305 | ||
555a3656 HVR |
306 | /**************************************************************************** |
307 | * General Setup | |
308 | */ | |
f93e4159 | 309 | static struct orion5x_mpp_mode dns323_mv88f5181_mpp_modes[] __initdata = { |
19cfd5c0 LB |
310 | { 0, MPP_PCIE_RST_OUTn }, |
311 | { 1, MPP_GPIO }, /* right amber LED (sata ch0) */ | |
312 | { 2, MPP_GPIO }, /* left amber LED (sata ch1) */ | |
313 | { 3, MPP_UNUSED }, | |
314 | { 4, MPP_GPIO }, /* power button LED */ | |
315 | { 5, MPP_GPIO }, /* power button LED */ | |
316 | { 6, MPP_GPIO }, /* GMT G751-2f overtemp */ | |
317 | { 7, MPP_GPIO }, /* M41T80 nIRQ/OUT/SQW */ | |
318 | { 8, MPP_GPIO }, /* triggers power off */ | |
319 | { 9, MPP_GPIO }, /* power button switch */ | |
320 | { 10, MPP_GPIO }, /* reset button switch */ | |
321 | { 11, MPP_UNUSED }, | |
322 | { 12, MPP_UNUSED }, | |
323 | { 13, MPP_UNUSED }, | |
324 | { 14, MPP_UNUSED }, | |
325 | { 15, MPP_UNUSED }, | |
326 | { 16, MPP_UNUSED }, | |
327 | { 17, MPP_UNUSED }, | |
328 | { 18, MPP_UNUSED }, | |
329 | { 19, MPP_UNUSED }, | |
330 | { -1 }, | |
331 | }; | |
555a3656 | 332 | |
f93e4159 MP |
333 | static struct orion5x_mpp_mode dns323_mv88f5182_mpp_modes[] __initdata = { |
334 | { 0, MPP_UNUSED }, | |
335 | { 1, MPP_GPIO }, /* right amber LED (sata ch0) */ | |
336 | { 2, MPP_GPIO }, /* left amber LED (sata ch1) */ | |
337 | { 3, MPP_UNUSED }, | |
338 | { 4, MPP_GPIO }, /* power button LED */ | |
339 | { 5, MPP_GPIO }, /* power button LED */ | |
340 | { 6, MPP_GPIO }, /* GMT G751-2f overtemp */ | |
341 | { 7, MPP_GPIO }, /* M41T80 nIRQ/OUT/SQW */ | |
342 | { 8, MPP_GPIO }, /* triggers power off */ | |
343 | { 9, MPP_GPIO }, /* power button switch */ | |
344 | { 10, MPP_GPIO }, /* reset button switch */ | |
345 | { 11, MPP_UNUSED }, | |
346 | { 12, MPP_SATA_LED }, | |
347 | { 13, MPP_SATA_LED }, | |
348 | { 14, MPP_SATA_LED }, | |
349 | { 15, MPP_SATA_LED }, | |
350 | { 16, MPP_UNUSED }, | |
351 | { 17, MPP_UNUSED }, | |
352 | { 18, MPP_UNUSED }, | |
353 | { 19, MPP_UNUSED }, | |
354 | { -1 }, | |
355 | }; | |
356 | ||
555a3656 HVR |
357 | /* |
358 | * On the DNS-323 the following devices are attached via I2C: | |
359 | * | |
360 | * i2c addr | chip | description | |
361 | * 0x3e | GMT G760Af | fan speed PWM controller | |
362 | * 0x48 | GMT G751-2f | temp. sensor and therm. watchdog (LM75 compatible) | |
363 | * 0x68 | ST M41T80 | RTC w/ alarm | |
364 | */ | |
365 | static struct i2c_board_info __initdata dns323_i2c_devices[] = { | |
366 | { | |
367 | I2C_BOARD_INFO("g760a", 0x3e), | |
e7068ad3 | 368 | }, { |
c0fe819b | 369 | I2C_BOARD_INFO("lm75", 0x48), |
e7068ad3 | 370 | }, { |
3760f736 | 371 | I2C_BOARD_INFO("m41t80", 0x68), |
e7068ad3 | 372 | }, |
555a3656 HVR |
373 | }; |
374 | ||
375 | /* DNS-323 specific power off method */ | |
376 | static void dns323_power_off(void) | |
377 | { | |
378 | pr_info("%s: triggering power-off...\n", __func__); | |
379 | gpio_set_value(DNS323_GPIO_POWER_OFF, 1); | |
380 | } | |
381 | ||
382 | static void __init dns323_init(void) | |
383 | { | |
384 | /* Setup basic Orion functions. Need to be called early. */ | |
9dd0b194 | 385 | orion5x_init(); |
555a3656 | 386 | |
f93e4159 MP |
387 | /* Just to be tricky, the 5182 has a completely different |
388 | * set of MPP modes to the 5181. | |
389 | */ | |
390 | if (dns323_dev_id() == MV88F5182_DEV_ID) | |
391 | orion5x_mpp_conf(dns323_mv88f5182_mpp_modes); | |
392 | else { | |
393 | orion5x_mpp_conf(dns323_mv88f5181_mpp_modes); | |
394 | writel(0, MPP_DEV_CTRL); /* DEV_D[31:16] */ | |
395 | } | |
555a3656 | 396 | |
044f6c7c LB |
397 | /* setup flash mapping |
398 | * CS3 holds a 8 MB Spansion S29GL064M90TFIR4 | |
399 | */ | |
400 | orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE); | |
401 | platform_device_register(&dns323_nor_flash); | |
402 | ||
403 | platform_device_register(&dns323_gpio_leds); | |
555a3656 | 404 | |
044f6c7c | 405 | platform_device_register(&dns323_button_device); |
555a3656 HVR |
406 | |
407 | i2c_register_board_info(0, dns323_i2c_devices, | |
408 | ARRAY_SIZE(dns323_i2c_devices)); | |
409 | ||
a93f44c1 MP |
410 | /* |
411 | * Configure peripherals. | |
412 | */ | |
413 | if (dns323_read_mac_addr() < 0) | |
414 | printk("DNS323: Failed to read MAC address\n"); | |
415 | ||
416 | orion5x_ehci0_init(); | |
417 | orion5x_eth_init(&dns323_eth_data); | |
418 | orion5x_i2c_init(); | |
419 | orion5x_uart0_init(); | |
420 | ||
ace14b82 | 421 | /* The 5182 has its SATA controller on-chip, and needs its own little |
f93e4159 MP |
422 | * init routine. |
423 | */ | |
424 | if (dns323_dev_id() == MV88F5182_DEV_ID) | |
425 | orion5x_sata_init(&dns323_sata_data); | |
426 | ||
044f6c7c LB |
427 | /* register dns323 specific power-off method */ |
428 | if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 || | |
429 | gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0) | |
430 | pr_err("DNS323: failed to setup power-off GPIO\n"); | |
431 | pm_power_off = dns323_power_off; | |
555a3656 HVR |
432 | } |
433 | ||
434 | /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */ | |
435 | MACHINE_START(DNS323, "D-Link DNS-323") | |
436 | /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */ | |
9dd0b194 LB |
437 | .phys_io = ORION5X_REGS_PHYS_BASE, |
438 | .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, | |
555a3656 HVR |
439 | .boot_params = 0x00000100, |
440 | .init_machine = dns323_init, | |
9dd0b194 LB |
441 | .map_io = orion5x_map_io, |
442 | .init_irq = orion5x_init_irq, | |
443 | .timer = &orion5x_timer, | |
be73a347 | 444 | .fixup = tag_fixup_mem32, |
555a3656 | 445 | MACHINE_END |