[ARM] pxa: add pxa3xx NAND device and clock sources
[deliverable/linux.git] / arch / arm / mach-pxa / lubbock.c
CommitLineData
1da177e4
LT
1/*
2 * linux/arch/arm/mach-pxa/lubbock.c
3 *
4 * Support for the Intel DBPXA250 Development Platform.
5 *
6 * Author: Nicolas Pitre
7 * Created: Jun 15, 2001
8 * Copyright: MontaVista Software Inc.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13 */
14#include <linux/module.h>
15#include <linux/kernel.h>
16#include <linux/init.h>
d052d1be 17#include <linux/platform_device.h>
22f11c4e 18#include <linux/sysdev.h>
1da177e4
LT
19#include <linux/major.h>
20#include <linux/fb.h>
21#include <linux/interrupt.h>
74ec71e1
TP
22#include <linux/mtd/mtd.h>
23#include <linux/mtd/partitions.h>
1da177e4 24
9df5db80
DB
25#include <linux/spi/spi.h>
26#include <linux/spi/ads7846.h>
27#include <asm/arch/pxa2xx_spi.h>
28
1da177e4
LT
29#include <asm/setup.h>
30#include <asm/memory.h>
31#include <asm/mach-types.h>
32#include <asm/hardware.h>
33#include <asm/irq.h>
74ec71e1 34#include <asm/sizes.h>
1da177e4
LT
35
36#include <asm/mach/arch.h>
37#include <asm/mach/map.h>
38#include <asm/mach/irq.h>
74ec71e1 39#include <asm/mach/flash.h>
1da177e4
LT
40
41#include <asm/hardware/sa1111.h>
42
43#include <asm/arch/pxa-regs.h>
8785a8fb 44#include <asm/arch/pxa2xx-regs.h>
9b02b2df 45#include <asm/arch/mfp-pxa25x.h>
9f19d638 46#include <asm/arch/audio.h>
1da177e4
LT
47#include <asm/arch/lubbock.h>
48#include <asm/arch/udc.h>
6f475c01 49#include <asm/arch/irda.h>
1da177e4
LT
50#include <asm/arch/pxafb.h>
51#include <asm/arch/mmc.h>
52
53#include "generic.h"
46c41e62 54#include "devices.h"
1da177e4 55
9b02b2df 56static unsigned long lubbock_pin_config[] __initdata = {
57 GPIO15_nCS_1, /* CS1 - Flash */
58 GPIO79_nCS_3, /* CS3 - SMC ethernet */
59
60 /* SSP data pins */
61 GPIO23_SSP1_SCLK,
62 GPIO25_SSP1_TXD,
63 GPIO26_SSP1_RXD,
64
65 /* BTUART */
66 GPIO42_BTUART_RXD,
67 GPIO43_BTUART_TXD,
68 GPIO44_BTUART_CTS,
69 GPIO45_BTUART_RTS,
70
71 /* PC Card */
72 GPIO48_nPOE,
73 GPIO49_nPWE,
74 GPIO50_nPIOR,
75 GPIO51_nPIOW,
76 GPIO52_nPCE_1,
77 GPIO53_nPCE_2,
78 GPIO54_nPSKTSEL,
79 GPIO55_nPREG,
80 GPIO56_nPWAIT,
81 GPIO57_nIOIS16,
82
83 /* MMC */
84 GPIO6_MMC_CLK,
85 GPIO8_MMC_CS0,
86
87 /* wakeup */
88 GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
89};
1da177e4
LT
90
91#define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
92
93void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
94{
95 unsigned long flags;
96
97 local_irq_save(flags);
98 LUB_MISC_WR = (LUB_MISC_WR & ~mask) | (set & mask);
99 local_irq_restore(flags);
100}
101EXPORT_SYMBOL(lubbock_set_misc_wr);
102
103static unsigned long lubbock_irq_enabled;
104
105static void lubbock_mask_irq(unsigned int irq)
106{
107 int lubbock_irq = (irq - LUBBOCK_IRQ(0));
108 LUB_IRQ_MASK_EN = (lubbock_irq_enabled &= ~(1 << lubbock_irq));
109}
110
111static void lubbock_unmask_irq(unsigned int irq)
112{
113 int lubbock_irq = (irq - LUBBOCK_IRQ(0));
114 /* the irq can be acknowledged only if deasserted, so it's done here */
115 LUB_IRQ_SET_CLR &= ~(1 << lubbock_irq);
116 LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq));
117}
118
38c677cb
DB
119static struct irq_chip lubbock_irq_chip = {
120 .name = "FPGA",
1da177e4
LT
121 .ack = lubbock_mask_irq,
122 .mask = lubbock_mask_irq,
123 .unmask = lubbock_unmask_irq,
124};
125
10dd5ce2 126static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc)
1da177e4
LT
127{
128 unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
129 do {
130 GEDR(0) = GPIO_bit(0); /* clear our parent irq */
131 if (likely(pending)) {
132 irq = LUBBOCK_IRQ(0) + __ffs(pending);
133 desc = irq_desc + irq;
0cd61b68 134 desc_handle_irq(irq, desc);
1da177e4
LT
135 }
136 pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
137 } while (pending);
138}
139
140static void __init lubbock_init_irq(void)
141{
142 int irq;
143
cd49104d 144 pxa25x_init_irq();
1da177e4
LT
145
146 /* setup extra lubbock irqs */
147 for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) {
148 set_irq_chip(irq, &lubbock_irq_chip);
10dd5ce2 149 set_irq_handler(irq, handle_level_irq);
1da177e4
LT
150 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
151 }
152
153 set_irq_chained_handler(IRQ_GPIO(0), lubbock_irq_handler);
154 set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
155}
156
22f11c4e
NP
157#ifdef CONFIG_PM
158
159static int lubbock_irq_resume(struct sys_device *dev)
160{
161 LUB_IRQ_MASK_EN = lubbock_irq_enabled;
162 return 0;
163}
164
165static struct sysdev_class lubbock_irq_sysclass = {
af5ca3f4 166 .name = "cpld_irq",
22f11c4e
NP
167 .resume = lubbock_irq_resume,
168};
169
170static struct sys_device lubbock_irq_device = {
171 .cls = &lubbock_irq_sysclass,
172};
173
174static int __init lubbock_irq_device_init(void)
175{
16f159b1
RK
176 int ret = -ENODEV;
177
178 if (machine_is_lubbock()) {
179 ret = sysdev_class_register(&lubbock_irq_sysclass);
180 if (ret == 0)
181 ret = sysdev_register(&lubbock_irq_device);
182 }
22f11c4e
NP
183 return ret;
184}
185
186device_initcall(lubbock_irq_device_init);
187
188#endif
189
1da177e4
LT
190static int lubbock_udc_is_connected(void)
191{
192 return (LUB_MISC_RD & (1 << 9)) == 0;
193}
194
195static struct pxa2xx_udc_mach_info udc_info __initdata = {
196 .udc_is_connected = lubbock_udc_is_connected,
197 // no D+ pullup; lubbock can't connect/disconnect in software
198};
199
200static struct resource sa1111_resources[] = {
201 [0] = {
202 .start = 0x10000000,
203 .end = 0x10001fff,
204 .flags = IORESOURCE_MEM,
205 },
206 [1] = {
207 .start = LUBBOCK_SA1111_IRQ,
208 .end = LUBBOCK_SA1111_IRQ,
209 .flags = IORESOURCE_IRQ,
210 },
211};
212
213static struct platform_device sa1111_device = {
214 .name = "sa1111",
215 .id = -1,
216 .num_resources = ARRAY_SIZE(sa1111_resources),
217 .resource = sa1111_resources,
218};
219
9df5db80
DB
220/* ADS7846 is connected through SSP ... and if your board has J5 populated,
221 * you can select it to replace the ucb1400 by switching the touchscreen cable
222 * (to J5) and poking board registers (as done below). Else it's only useful
223 * for the temperature sensors.
224 */
9df5db80 225static struct pxa2xx_spi_master pxa_ssp_master_info = {
9df5db80
DB
226 .num_chipselect = 0,
227};
228
9df5db80
DB
229static int lubbock_ads7846_pendown_state(void)
230{
231 /* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
232 return 0;
233}
234
235static struct ads7846_platform_data ads_info = {
236 .model = 7846,
237 .vref_delay_usecs = 100, /* internal, no cap */
238 .get_pendown_state = lubbock_ads7846_pendown_state,
239 // .x_plate_ohms = 500, /* GUESS! */
240 // .y_plate_ohms = 500, /* GUESS! */
241};
242
243static void ads7846_cs(u32 command)
244{
245 static const unsigned TS_nCS = 1 << 11;
246 lubbock_set_misc_wr(TS_nCS, (command == PXA2XX_CS_ASSERT) ? 0 : TS_nCS);
247}
248
249static struct pxa2xx_spi_chip ads_hw = {
250 .tx_threshold = 1,
251 .rx_threshold = 2,
252 .cs_control = ads7846_cs,
253};
254
255static struct spi_board_info spi_board_info[] __initdata = { {
256 .modalias = "ads7846",
257 .platform_data = &ads_info,
258 .controller_data = &ads_hw,
259 .irq = LUBBOCK_BB_IRQ,
260 .max_speed_hz = 120000 /* max sample rate at 3V */
261 * 26 /* command + data + overhead */,
262 .bus_num = 1,
263 .chip_select = 0,
264},
265};
266
e21e2d46
RK
267static struct resource smc91x_resources[] = {
268 [0] = {
269 .name = "smc91x-regs",
270 .start = 0x0c000c00,
271 .end = 0x0c0fffff,
272 .flags = IORESOURCE_MEM,
273 },
274 [1] = {
275 .start = LUBBOCK_ETH_IRQ,
276 .end = LUBBOCK_ETH_IRQ,
277 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
278 },
279 [2] = {
280 .name = "smc91x-attrib",
281 .start = 0x0e000000,
282 .end = 0x0e0fffff,
283 .flags = IORESOURCE_MEM,
284 },
285};
286
1da177e4
LT
287static struct platform_device smc91x_device = {
288 .name = "smc91x",
289 .id = -1,
290 .num_resources = ARRAY_SIZE(smc91x_resources),
291 .resource = smc91x_resources,
292};
293
74ec71e1
TP
294static struct resource flash_resources[] = {
295 [0] = {
296 .start = 0x00000000,
297 .end = SZ_64M - 1,
298 .flags = IORESOURCE_MEM,
299 },
300 [1] = {
301 .start = 0x04000000,
302 .end = 0x04000000 + SZ_64M - 1,
303 .flags = IORESOURCE_MEM,
304 },
305};
306
307static struct mtd_partition lubbock_partitions[] = {
308 {
309 .name = "Bootloader",
310 .size = 0x00040000,
311 .offset = 0,
312 .mask_flags = MTD_WRITEABLE /* force read-only */
313 },{
314 .name = "Kernel",
315 .size = 0x00100000,
316 .offset = 0x00040000,
317 },{
318 .name = "Filesystem",
319 .size = MTDPART_SIZ_FULL,
320 .offset = 0x00140000
321 }
322};
323
324static struct flash_platform_data lubbock_flash_data[2] = {
325 {
326 .map_name = "cfi_probe",
327 .parts = lubbock_partitions,
328 .nr_parts = ARRAY_SIZE(lubbock_partitions),
329 }, {
330 .map_name = "cfi_probe",
331 .parts = NULL,
332 .nr_parts = 0,
333 }
334};
335
336static struct platform_device lubbock_flash_device[2] = {
337 {
338 .name = "pxa2xx-flash",
339 .id = 0,
340 .dev = {
341 .platform_data = &lubbock_flash_data[0],
342 },
343 .resource = &flash_resources[0],
344 .num_resources = 1,
345 },
346 {
347 .name = "pxa2xx-flash",
348 .id = 1,
349 .dev = {
350 .platform_data = &lubbock_flash_data[1],
351 },
352 .resource = &flash_resources[1],
353 .num_resources = 1,
354 },
355};
356
1da177e4
LT
357static struct platform_device *devices[] __initdata = {
358 &sa1111_device,
359 &smc91x_device,
74ec71e1
TP
360 &lubbock_flash_device[0],
361 &lubbock_flash_device[1],
1da177e4
LT
362};
363
d14b272b 364static struct pxafb_mode_info sharp_lm8v31_mode = {
1da177e4
LT
365 .pixclock = 270000,
366 .xres = 640,
367 .yres = 480,
368 .bpp = 16,
369 .hsync_len = 1,
370 .left_margin = 3,
371 .right_margin = 3,
372 .vsync_len = 1,
373 .upper_margin = 0,
374 .lower_margin = 0,
375 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
376 .cmap_greyscale = 0,
d14b272b
RP
377};
378
379static struct pxafb_mach_info sharp_lm8v31 = {
380 .modes = &sharp_lm8v31_mode,
381 .num_modes = 1,
1da177e4
LT
382 .cmap_inverse = 0,
383 .cmap_static = 0,
0454bd09 384 .lcd_conn = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
ffebabe0 385 LCD_AC_BIAS_FREQ(255),
1da177e4
LT
386};
387
85eb226c
DB
388#define MMC_POLL_RATE msecs_to_jiffies(1000)
389
390static void lubbock_mmc_poll(unsigned long);
40220c1a 391static irq_handler_t mmc_detect_int;
85eb226c
DB
392
393static struct timer_list mmc_timer = {
394 .function = lubbock_mmc_poll,
395};
396
397static void lubbock_mmc_poll(unsigned long data)
398{
399 unsigned long flags;
400
401 /* clear any previous irq state, then ... */
402 local_irq_save(flags);
403 LUB_IRQ_SET_CLR &= ~(1 << 0);
404 local_irq_restore(flags);
405
406 /* poll until mmc/sd card is removed */
407 if (LUB_IRQ_SET_CLR & (1 << 0))
408 mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
409 else {
2326eb98 410 (void) mmc_detect_int(LUBBOCK_SD_IRQ, (void *)data);
85eb226c
DB
411 enable_irq(LUBBOCK_SD_IRQ);
412 }
413}
414
0cd61b68 415static irqreturn_t lubbock_detect_int(int irq, void *data)
85eb226c
DB
416{
417 /* IRQ is level triggered; disable, and poll for removal */
418 disable_irq(irq);
419 mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
420
0cd61b68 421 return mmc_detect_int(irq, data);
85eb226c
DB
422}
423
424static int lubbock_mci_init(struct device *dev,
40220c1a 425 irq_handler_t detect_int,
85eb226c 426 void *data)
1da177e4 427{
85eb226c
DB
428 /* detect card insert/eject */
429 mmc_detect_int = detect_int;
430 init_timer(&mmc_timer);
431 mmc_timer.data = (unsigned long) data;
432 return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int,
52e405ea 433 IRQF_SAMPLE_RANDOM, "lubbock-sd-detect", data);
85eb226c
DB
434}
435
436static int lubbock_mci_get_ro(struct device *dev)
437{
438 return (LUB_MISC_RD & (1 << 2)) != 0;
439}
440
441static void lubbock_mci_exit(struct device *dev, void *data)
442{
443 free_irq(LUBBOCK_SD_IRQ, data);
444 del_timer_sync(&mmc_timer);
1da177e4
LT
445}
446
447static struct pxamci_platform_data lubbock_mci_platform_data = {
448 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
85eb226c 449 .detect_delay = 1,
1da177e4 450 .init = lubbock_mci_init,
85eb226c
DB
451 .get_ro = lubbock_mci_get_ro,
452 .exit = lubbock_mci_exit,
1da177e4
LT
453};
454
6f475c01
NP
455static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
456{
457 unsigned long flags;
458
459 local_irq_save(flags);
460 if (mode & IR_SIRMODE) {
461 LUB_MISC_WR &= ~(1 << 4);
462 } else if (mode & IR_FIRMODE) {
463 LUB_MISC_WR |= 1 << 4;
464 }
465 local_irq_restore(flags);
466}
467
468static struct pxaficp_platform_data lubbock_ficp_platform_data = {
469 .transceiver_cap = IR_SIRMODE | IR_FIRMODE,
470 .transceiver_mode = lubbock_irda_transceiver_mode,
471};
472
1da177e4
LT
473static void __init lubbock_init(void)
474{
74ec71e1
TP
475 int flashboot = (LUB_CONF_SWITCHES & 1);
476
9b02b2df 477 pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
478
1da177e4
LT
479 pxa_set_udc_info(&udc_info);
480 set_pxa_fb_info(&sharp_lm8v31);
481 pxa_set_mci_info(&lubbock_mci_platform_data);
6f475c01 482 pxa_set_ficp_info(&lubbock_ficp_platform_data);
9f19d638 483 pxa_set_ac97_info(NULL);
74ec71e1
TP
484
485 lubbock_flash_data[0].width = lubbock_flash_data[1].width =
486 (BOOT_DEF & 1) ? 2 : 4;
487 /* Compensate for the nROMBT switch which swaps the flash banks */
488 printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
489 flashboot?"Flash":"ROM", flashboot);
490
491 lubbock_flash_data[flashboot^1].name = "application-flash";
492 lubbock_flash_data[flashboot].name = "boot-rom";
1da177e4 493 (void) platform_add_devices(devices, ARRAY_SIZE(devices));
9df5db80 494
e172274c 495 pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
9df5db80 496 spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
1da177e4
LT
497}
498
499static struct map_desc lubbock_io_desc[] __initdata = {
6f9182eb
DS
500 { /* CPLD */
501 .virtual = LUBBOCK_FPGA_VIRT,
502 .pfn = __phys_to_pfn(LUBBOCK_FPGA_PHYS),
503 .length = 0x00100000,
504 .type = MT_DEVICE
505 }
1da177e4
LT
506};
507
508static void __init lubbock_map_io(void)
509{
510 pxa_map_io();
511 iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
512
1da177e4
LT
513 PCFR |= PCFR_OPDE;
514}
515
516MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
e9dea0c6 517 /* Maintainer: MontaVista Software Inc. */
e9dea0c6 518 .phys_io = 0x40000000,
68070bde 519 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
e9dea0c6
RK
520 .map_io = lubbock_map_io,
521 .init_irq = lubbock_init_irq,
1da177e4 522 .timer = &pxa_timer,
e9dea0c6 523 .init_machine = lubbock_init,
1da177e4 524MACHINE_END
This page took 1.560054 seconds and 5 git commands to generate.