Commit | Line | Data |
---|---|---|
b6377992 MV |
1 | /* |
2 | * linux/arch/arm/mach-pxa/z2.c | |
3 | * | |
4 | * Support for the Zipit Z2 Handheld device. | |
5 | * | |
60adc112 MV |
6 | * Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com> |
7 | * | |
8 | * Based on research and code by: Ken McGuire | |
b6377992 MV |
9 | * Based on mainstone.c as modified for the Zipit Z2. |
10 | * | |
11 | * This program is free software; you can redistribute it and/or modify | |
12 | * it under the terms of the GNU General Public License version 2 as | |
13 | * published by the Free Software Foundation. | |
14 | */ | |
15 | ||
16 | #include <linux/platform_device.h> | |
17 | #include <linux/mtd/mtd.h> | |
18 | #include <linux/mtd/partitions.h> | |
19 | #include <linux/pwm_backlight.h> | |
d198290d | 20 | #include <linux/z2_battery.h> |
b6377992 MV |
21 | #include <linux/dma-mapping.h> |
22 | #include <linux/spi/spi.h> | |
8348c259 | 23 | #include <linux/spi/pxa2xx_spi.h> |
b6377992 MV |
24 | #include <linux/spi/libertas_spi.h> |
25 | #include <linux/spi/lms283gf05.h> | |
26 | #include <linux/power_supply.h> | |
27 | #include <linux/mtd/physmap.h> | |
28 | #include <linux/gpio.h> | |
29 | #include <linux/gpio_keys.h> | |
30 | #include <linux/delay.h> | |
320bbb86 | 31 | #include <linux/regulator/machine.h> |
b459396e | 32 | #include <linux/i2c/pxa-i2c.h> |
b6377992 MV |
33 | |
34 | #include <asm/mach-types.h> | |
35 | #include <asm/mach/arch.h> | |
36 | ||
37 | #include <mach/pxa27x.h> | |
38 | #include <mach/mfp-pxa27x.h> | |
39 | #include <mach/z2.h> | |
293b2da1 AB |
40 | #include <linux/platform_data/video-pxafb.h> |
41 | #include <linux/platform_data/mmc-pxamci.h> | |
42 | #include <linux/platform_data/keypad-pxa27x.h> | |
41646b24 | 43 | #include <mach/pm.h> |
b6377992 | 44 | |
b6377992 MV |
45 | #include "generic.h" |
46 | #include "devices.h" | |
47 | ||
48 | /****************************************************************************** | |
49 | * Pin configuration | |
50 | ******************************************************************************/ | |
51 | static unsigned long z2_pin_config[] = { | |
52 | ||
53 | /* LCD - 16bpp Active TFT */ | |
54 | GPIO58_LCD_LDD_0, | |
55 | GPIO59_LCD_LDD_1, | |
56 | GPIO60_LCD_LDD_2, | |
57 | GPIO61_LCD_LDD_3, | |
58 | GPIO62_LCD_LDD_4, | |
59 | GPIO63_LCD_LDD_5, | |
60 | GPIO64_LCD_LDD_6, | |
61 | GPIO65_LCD_LDD_7, | |
62 | GPIO66_LCD_LDD_8, | |
63 | GPIO67_LCD_LDD_9, | |
64 | GPIO68_LCD_LDD_10, | |
65 | GPIO69_LCD_LDD_11, | |
66 | GPIO70_LCD_LDD_12, | |
67 | GPIO71_LCD_LDD_13, | |
68 | GPIO72_LCD_LDD_14, | |
69 | GPIO73_LCD_LDD_15, | |
70 | GPIO74_LCD_FCLK, | |
71 | GPIO75_LCD_LCLK, | |
72 | GPIO76_LCD_PCLK, | |
73 | GPIO77_LCD_BIAS, | |
74 | GPIO19_GPIO, /* LCD reset */ | |
75 | GPIO88_GPIO, /* LCD chipselect */ | |
76 | ||
77 | /* PWM */ | |
78 | GPIO115_PWM1_OUT, /* Keypad Backlight */ | |
79 | GPIO11_PWM2_OUT, /* LCD Backlight */ | |
80 | ||
81 | /* MMC */ | |
82 | GPIO32_MMC_CLK, | |
83 | GPIO112_MMC_CMD, | |
84 | GPIO92_MMC_DAT_0, | |
85 | GPIO109_MMC_DAT_1, | |
86 | GPIO110_MMC_DAT_2, | |
87 | GPIO111_MMC_DAT_3, | |
88 | GPIO96_GPIO, /* SD detect */ | |
89 | ||
90 | /* STUART */ | |
91 | GPIO46_STUART_RXD, | |
92 | GPIO47_STUART_TXD, | |
93 | ||
94 | /* Keypad */ | |
2e62344d VK |
95 | GPIO100_KP_MKIN_0, |
96 | GPIO101_KP_MKIN_1, | |
97 | GPIO102_KP_MKIN_2, | |
98 | GPIO34_KP_MKIN_3, | |
99 | GPIO38_KP_MKIN_4, | |
100 | GPIO16_KP_MKIN_5, | |
101 | GPIO17_KP_MKIN_6, | |
b6377992 MV |
102 | GPIO103_KP_MKOUT_0, |
103 | GPIO104_KP_MKOUT_1, | |
104 | GPIO105_KP_MKOUT_2, | |
105 | GPIO106_KP_MKOUT_3, | |
106 | GPIO107_KP_MKOUT_4, | |
107 | GPIO108_KP_MKOUT_5, | |
108 | GPIO35_KP_MKOUT_6, | |
109 | GPIO41_KP_MKOUT_7, | |
110 | ||
111 | /* I2C */ | |
112 | GPIO117_I2C_SCL, | |
113 | GPIO118_I2C_SDA, | |
114 | ||
115 | /* SSP1 */ | |
116 | GPIO23_SSP1_SCLK, /* SSP1_SCK */ | |
117 | GPIO25_SSP1_TXD, /* SSP1_TXD */ | |
118 | GPIO26_SSP1_RXD, /* SSP1_RXD */ | |
119 | ||
120 | /* SSP2 */ | |
121 | GPIO22_SSP2_SCLK, /* SSP2_SCK */ | |
122 | GPIO13_SSP2_TXD, /* SSP2_TXD */ | |
123 | GPIO40_SSP2_RXD, /* SSP2_RXD */ | |
124 | ||
125 | /* LEDs */ | |
126 | GPIO10_GPIO, /* WiFi LED */ | |
127 | GPIO83_GPIO, /* Charging LED */ | |
128 | GPIO85_GPIO, /* Charged LED */ | |
129 | ||
130 | /* I2S */ | |
131 | GPIO28_I2S_BITCLK_OUT, | |
132 | GPIO29_I2S_SDATA_IN, | |
133 | GPIO30_I2S_SDATA_OUT, | |
134 | GPIO31_I2S_SYNC, | |
135 | GPIO113_I2S_SYSCLK, | |
136 | ||
137 | /* MISC */ | |
138 | GPIO0_GPIO, /* AC power detect */ | |
139 | GPIO1_GPIO, /* Power button */ | |
140 | GPIO37_GPIO, /* Headphone detect */ | |
141 | GPIO98_GPIO, /* Lid switch */ | |
b8f56a78 | 142 | GPIO14_GPIO, /* WiFi Power */ |
b6377992 MV |
143 | GPIO24_GPIO, /* WiFi CS */ |
144 | GPIO36_GPIO, /* WiFi IRQ */ | |
145 | GPIO88_GPIO, /* LCD CS */ | |
146 | }; | |
147 | ||
148 | /****************************************************************************** | |
149 | * NOR Flash | |
150 | ******************************************************************************/ | |
151 | #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) | |
152 | static struct resource z2_flash_resource = { | |
153 | .start = PXA_CS0_PHYS, | |
154 | .end = PXA_CS0_PHYS + SZ_8M - 1, | |
155 | .flags = IORESOURCE_MEM, | |
156 | }; | |
157 | ||
158 | static struct mtd_partition z2_flash_parts[] = { | |
159 | { | |
160 | .name = "U-Boot Bootloader", | |
161 | .offset = 0x0, | |
60adc112 MV |
162 | .size = 0x40000, |
163 | }, { | |
b6377992 | 164 | .name = "U-Boot Environment", |
60adc112 | 165 | .offset = 0x40000, |
77310840 | 166 | .size = 0x20000, |
60adc112 MV |
167 | }, { |
168 | .name = "Flash", | |
169 | .offset = 0x60000, | |
b6377992 MV |
170 | .size = MTDPART_SIZ_FULL, |
171 | }, | |
172 | }; | |
173 | ||
174 | static struct physmap_flash_data z2_flash_data = { | |
175 | .width = 2, | |
176 | .parts = z2_flash_parts, | |
177 | .nr_parts = ARRAY_SIZE(z2_flash_parts), | |
178 | }; | |
179 | ||
180 | static struct platform_device z2_flash = { | |
181 | .name = "physmap-flash", | |
182 | .id = -1, | |
183 | .resource = &z2_flash_resource, | |
184 | .num_resources = 1, | |
185 | .dev = { | |
186 | .platform_data = &z2_flash_data, | |
187 | }, | |
188 | }; | |
189 | ||
190 | static void __init z2_nor_init(void) | |
191 | { | |
192 | platform_device_register(&z2_flash); | |
193 | } | |
194 | #else | |
195 | static inline void z2_nor_init(void) {} | |
196 | #endif | |
197 | ||
198 | /****************************************************************************** | |
199 | * Backlight | |
200 | ******************************************************************************/ | |
201 | #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) | |
202 | static struct platform_pwm_backlight_data z2_backlight_data[] = { | |
203 | [0] = { | |
204 | /* Keypad Backlight */ | |
205 | .pwm_id = 1, | |
206 | .max_brightness = 1023, | |
034e1756 | 207 | .dft_brightness = 0, |
b6377992 | 208 | .pwm_period_ns = 1260320, |
db01120c | 209 | .enable_gpio = -1, |
b6377992 MV |
210 | }, |
211 | [1] = { | |
212 | /* LCD Backlight */ | |
213 | .pwm_id = 2, | |
214 | .max_brightness = 1023, | |
215 | .dft_brightness = 512, | |
216 | .pwm_period_ns = 1260320, | |
db01120c | 217 | .enable_gpio = -1, |
b6377992 MV |
218 | }, |
219 | }; | |
220 | ||
221 | static struct platform_device z2_backlight_devices[2] = { | |
222 | { | |
223 | .name = "pwm-backlight", | |
224 | .id = 0, | |
225 | .dev = { | |
226 | .platform_data = &z2_backlight_data[1], | |
227 | }, | |
228 | }, | |
229 | { | |
230 | .name = "pwm-backlight", | |
231 | .id = 1, | |
232 | .dev = { | |
233 | .platform_data = &z2_backlight_data[0], | |
234 | }, | |
235 | }, | |
236 | }; | |
237 | static void __init z2_pwm_init(void) | |
238 | { | |
239 | platform_device_register(&z2_backlight_devices[0]); | |
240 | platform_device_register(&z2_backlight_devices[1]); | |
241 | } | |
242 | #else | |
243 | static inline void z2_pwm_init(void) {} | |
244 | #endif | |
245 | ||
246 | /****************************************************************************** | |
247 | * Framebuffer | |
248 | ******************************************************************************/ | |
249 | #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) | |
250 | static struct pxafb_mode_info z2_lcd_modes[] = { | |
251 | { | |
252 | .pixclock = 192000, | |
253 | .xres = 240, | |
254 | .yres = 320, | |
255 | .bpp = 16, | |
256 | ||
257 | .left_margin = 4, | |
258 | .right_margin = 8, | |
259 | .upper_margin = 4, | |
260 | .lower_margin = 8, | |
261 | ||
262 | .hsync_len = 4, | |
263 | .vsync_len = 4, | |
264 | }, | |
265 | }; | |
266 | ||
267 | static struct pxafb_mach_info z2_lcd_screen = { | |
268 | .modes = z2_lcd_modes, | |
269 | .num_modes = ARRAY_SIZE(z2_lcd_modes), | |
270 | .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_BIAS_ACTIVE_LOW | | |
271 | LCD_ALTERNATE_MAPPING, | |
272 | }; | |
273 | ||
274 | static void __init z2_lcd_init(void) | |
275 | { | |
4321e1a1 | 276 | pxa_set_fb_info(NULL, &z2_lcd_screen); |
b6377992 MV |
277 | } |
278 | #else | |
279 | static inline void z2_lcd_init(void) {} | |
280 | #endif | |
281 | ||
282 | /****************************************************************************** | |
283 | * SD/MMC card controller | |
284 | ******************************************************************************/ | |
285 | #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) | |
286 | static struct pxamci_platform_data z2_mci_platform_data = { | |
287 | .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, | |
288 | .gpio_card_detect = GPIO96_ZIPITZ2_SD_DETECT, | |
289 | .gpio_power = -1, | |
290 | .gpio_card_ro = -1, | |
f97cab28 | 291 | .detect_delay_ms = 200, |
b6377992 MV |
292 | }; |
293 | ||
294 | static void __init z2_mmc_init(void) | |
295 | { | |
296 | pxa_set_mci_info(&z2_mci_platform_data); | |
297 | } | |
298 | #else | |
299 | static inline void z2_mmc_init(void) {} | |
300 | #endif | |
301 | ||
302 | /****************************************************************************** | |
303 | * LEDs | |
304 | ******************************************************************************/ | |
305 | #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) | |
306 | struct gpio_led z2_gpio_leds[] = { | |
307 | { | |
308 | .name = "z2:green:wifi", | |
309 | .default_trigger = "none", | |
310 | .gpio = GPIO10_ZIPITZ2_LED_WIFI, | |
311 | .active_low = 1, | |
312 | }, { | |
313 | .name = "z2:green:charged", | |
54d57100 | 314 | .default_trigger = "mmc0", |
b6377992 MV |
315 | .gpio = GPIO85_ZIPITZ2_LED_CHARGED, |
316 | .active_low = 1, | |
317 | }, { | |
318 | .name = "z2:amber:charging", | |
54d57100 | 319 | .default_trigger = "Z2-charging-or-full", |
b6377992 MV |
320 | .gpio = GPIO83_ZIPITZ2_LED_CHARGING, |
321 | .active_low = 1, | |
322 | }, | |
323 | }; | |
324 | ||
325 | static struct gpio_led_platform_data z2_gpio_led_info = { | |
326 | .leds = z2_gpio_leds, | |
327 | .num_leds = ARRAY_SIZE(z2_gpio_leds), | |
328 | }; | |
329 | ||
330 | static struct platform_device z2_leds = { | |
331 | .name = "leds-gpio", | |
332 | .id = -1, | |
333 | .dev = { | |
334 | .platform_data = &z2_gpio_led_info, | |
335 | } | |
336 | }; | |
337 | ||
338 | static void __init z2_leds_init(void) | |
339 | { | |
340 | platform_device_register(&z2_leds); | |
341 | } | |
342 | #else | |
343 | static inline void z2_leds_init(void) {} | |
344 | #endif | |
345 | ||
346 | /****************************************************************************** | |
347 | * GPIO keyboard | |
348 | ******************************************************************************/ | |
349 | #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE) | |
0a085a94 | 350 | static const unsigned int z2_matrix_keys[] = { |
b6377992 MV |
351 | KEY(0, 0, KEY_OPTION), |
352 | KEY(1, 0, KEY_UP), | |
353 | KEY(2, 0, KEY_DOWN), | |
354 | KEY(3, 0, KEY_LEFT), | |
355 | KEY(4, 0, KEY_RIGHT), | |
356 | KEY(5, 0, KEY_END), | |
357 | KEY(6, 0, KEY_KPPLUS), | |
358 | ||
359 | KEY(0, 1, KEY_HOME), | |
360 | KEY(1, 1, KEY_Q), | |
361 | KEY(2, 1, KEY_I), | |
362 | KEY(3, 1, KEY_G), | |
363 | KEY(4, 1, KEY_X), | |
364 | KEY(5, 1, KEY_ENTER), | |
365 | KEY(6, 1, KEY_KPMINUS), | |
366 | ||
367 | KEY(0, 2, KEY_PAGEUP), | |
368 | KEY(1, 2, KEY_W), | |
369 | KEY(2, 2, KEY_O), | |
370 | KEY(3, 2, KEY_H), | |
371 | KEY(4, 2, KEY_C), | |
372 | KEY(5, 2, KEY_LEFTALT), | |
373 | ||
374 | KEY(0, 3, KEY_PAGEDOWN), | |
375 | KEY(1, 3, KEY_E), | |
376 | KEY(2, 3, KEY_P), | |
377 | KEY(3, 3, KEY_J), | |
378 | KEY(4, 3, KEY_V), | |
379 | KEY(5, 3, KEY_LEFTSHIFT), | |
380 | ||
381 | KEY(0, 4, KEY_ESC), | |
382 | KEY(1, 4, KEY_R), | |
383 | KEY(2, 4, KEY_A), | |
384 | KEY(3, 4, KEY_K), | |
385 | KEY(4, 4, KEY_B), | |
386 | KEY(5, 4, KEY_LEFTCTRL), | |
387 | ||
388 | KEY(0, 5, KEY_TAB), | |
389 | KEY(1, 5, KEY_T), | |
390 | KEY(2, 5, KEY_S), | |
391 | KEY(3, 5, KEY_L), | |
392 | KEY(4, 5, KEY_N), | |
393 | KEY(5, 5, KEY_SPACE), | |
394 | ||
395 | KEY(0, 6, KEY_STOPCD), | |
396 | KEY(1, 6, KEY_Y), | |
397 | KEY(2, 6, KEY_D), | |
398 | KEY(3, 6, KEY_BACKSPACE), | |
399 | KEY(4, 6, KEY_M), | |
400 | KEY(5, 6, KEY_COMMA), | |
401 | ||
402 | KEY(0, 7, KEY_PLAYCD), | |
403 | KEY(1, 7, KEY_U), | |
404 | KEY(2, 7, KEY_F), | |
405 | KEY(3, 7, KEY_Z), | |
406 | KEY(4, 7, KEY_SEMICOLON), | |
407 | KEY(5, 7, KEY_DOT), | |
408 | }; | |
409 | ||
0a085a94 CX |
410 | static struct matrix_keymap_data z2_matrix_keymap_data = { |
411 | .keymap = z2_matrix_keys, | |
412 | .keymap_size = ARRAY_SIZE(z2_matrix_keys), | |
413 | }; | |
414 | ||
b6377992 MV |
415 | static struct pxa27x_keypad_platform_data z2_keypad_platform_data = { |
416 | .matrix_key_rows = 7, | |
417 | .matrix_key_cols = 8, | |
0a085a94 | 418 | .matrix_keymap_data = &z2_matrix_keymap_data, |
b6377992 MV |
419 | |
420 | .debounce_interval = 30, | |
421 | }; | |
422 | ||
423 | static void __init z2_mkp_init(void) | |
424 | { | |
425 | pxa_set_keypad_info(&z2_keypad_platform_data); | |
426 | } | |
427 | #else | |
428 | static inline void z2_mkp_init(void) {} | |
429 | #endif | |
430 | ||
431 | /****************************************************************************** | |
432 | * GPIO keys | |
433 | ******************************************************************************/ | |
434 | #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) | |
435 | static struct gpio_keys_button z2_pxa_buttons[] = { | |
2e62344d VK |
436 | { |
437 | .code = KEY_POWER, | |
438 | .gpio = GPIO1_ZIPITZ2_POWER_BUTTON, | |
439 | .active_low = 0, | |
440 | .desc = "Power Button", | |
441 | .wakeup = 1, | |
442 | .type = EV_KEY, | |
443 | }, | |
444 | { | |
e3b1ceed | 445 | .code = SW_LID, |
2e62344d | 446 | .gpio = GPIO98_ZIPITZ2_LID_BUTTON, |
e3b1ceed VK |
447 | .active_low = 1, |
448 | .desc = "Lid Switch", | |
449 | .wakeup = 0, | |
450 | .type = EV_SW, | |
2e62344d | 451 | }, |
b6377992 MV |
452 | }; |
453 | ||
454 | static struct gpio_keys_platform_data z2_pxa_keys_data = { | |
455 | .buttons = z2_pxa_buttons, | |
456 | .nbuttons = ARRAY_SIZE(z2_pxa_buttons), | |
457 | }; | |
458 | ||
459 | static struct platform_device z2_pxa_keys = { | |
460 | .name = "gpio-keys", | |
461 | .id = -1, | |
462 | .dev = { | |
463 | .platform_data = &z2_pxa_keys_data, | |
464 | }, | |
465 | }; | |
466 | ||
467 | static void __init z2_keys_init(void) | |
468 | { | |
469 | platform_device_register(&z2_pxa_keys); | |
470 | } | |
471 | #else | |
472 | static inline void z2_keys_init(void) {} | |
473 | #endif | |
474 | ||
d198290d MV |
475 | /****************************************************************************** |
476 | * Battery | |
477 | ******************************************************************************/ | |
478 | #if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE) | |
479 | static struct z2_battery_info batt_chip_info = { | |
480 | .batt_I2C_bus = 0, | |
481 | .batt_I2C_addr = 0x55, | |
482 | .batt_I2C_reg = 2, | |
483 | .charge_gpio = GPIO0_ZIPITZ2_AC_DETECT, | |
233cdbce VK |
484 | .min_voltage = 3475000, |
485 | .max_voltage = 4190000, | |
486 | .batt_div = 59, | |
d198290d MV |
487 | .batt_mult = 1000000, |
488 | .batt_tech = POWER_SUPPLY_TECHNOLOGY_LION, | |
489 | .batt_name = "Z2", | |
490 | }; | |
491 | ||
492 | static struct i2c_board_info __initdata z2_i2c_board_info[] = { | |
493 | { | |
494 | I2C_BOARD_INFO("aer915", 0x55), | |
495 | .platform_data = &batt_chip_info, | |
8499ded8 MV |
496 | }, { |
497 | I2C_BOARD_INFO("wm8750", 0x1b), | |
498 | }, | |
499 | ||
d198290d MV |
500 | }; |
501 | ||
502 | static void __init z2_i2c_init(void) | |
503 | { | |
504 | pxa_set_i2c_info(NULL); | |
505 | i2c_register_board_info(0, ARRAY_AND_SIZE(z2_i2c_board_info)); | |
506 | } | |
507 | #else | |
508 | static inline void z2_i2c_init(void) {} | |
509 | #endif | |
510 | ||
b6377992 MV |
511 | /****************************************************************************** |
512 | * SSP Devices - WiFi and LCD control | |
513 | ******************************************************************************/ | |
514 | #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) | |
515 | /* WiFi */ | |
516 | static int z2_lbs_spi_setup(struct spi_device *spi) | |
517 | { | |
518 | int ret = 0; | |
519 | ||
b8f56a78 | 520 | ret = gpio_request(GPIO14_ZIPITZ2_WIFI_POWER, "WiFi Power"); |
b6377992 MV |
521 | if (ret) |
522 | goto err; | |
523 | ||
b8f56a78 | 524 | ret = gpio_direction_output(GPIO14_ZIPITZ2_WIFI_POWER, 1); |
b6377992 MV |
525 | if (ret) |
526 | goto err2; | |
527 | ||
b8f56a78 | 528 | /* Wait until card is powered on */ |
b6377992 | 529 | mdelay(180); |
b6377992 MV |
530 | |
531 | spi->bits_per_word = 16; | |
532 | spi->mode = SPI_MODE_2, | |
533 | ||
534 | spi_setup(spi); | |
535 | ||
536 | return 0; | |
537 | ||
b6377992 | 538 | err2: |
b8f56a78 | 539 | gpio_free(GPIO14_ZIPITZ2_WIFI_POWER); |
b6377992 MV |
540 | err: |
541 | return ret; | |
542 | }; | |
543 | ||
544 | static int z2_lbs_spi_teardown(struct spi_device *spi) | |
545 | { | |
b8f56a78 VK |
546 | gpio_set_value(GPIO14_ZIPITZ2_WIFI_POWER, 0); |
547 | gpio_free(GPIO14_ZIPITZ2_WIFI_POWER); | |
b6377992 | 548 | |
b8f56a78 | 549 | return 0; |
b6377992 MV |
550 | }; |
551 | ||
552 | static struct pxa2xx_spi_chip z2_lbs_chip_info = { | |
553 | .rx_threshold = 8, | |
554 | .tx_threshold = 8, | |
555 | .timeout = 1000, | |
556 | .gpio_cs = GPIO24_ZIPITZ2_WIFI_CS, | |
557 | }; | |
558 | ||
559 | static struct libertas_spi_platform_data z2_lbs_pdata = { | |
560 | .use_dummy_writes = 1, | |
561 | .setup = z2_lbs_spi_setup, | |
562 | .teardown = z2_lbs_spi_teardown, | |
563 | }; | |
564 | ||
565 | /* LCD */ | |
566 | static struct pxa2xx_spi_chip lms283_chip_info = { | |
567 | .rx_threshold = 1, | |
568 | .tx_threshold = 1, | |
569 | .timeout = 64, | |
570 | .gpio_cs = GPIO88_ZIPITZ2_LCD_CS, | |
571 | }; | |
572 | ||
573 | static const struct lms283gf05_pdata lms283_pdata = { | |
574 | .reset_gpio = GPIO19_ZIPITZ2_LCD_RESET, | |
575 | }; | |
576 | ||
577 | static struct spi_board_info spi_board_info[] __initdata = { | |
578 | { | |
579 | .modalias = "libertas_spi", | |
580 | .platform_data = &z2_lbs_pdata, | |
581 | .controller_data = &z2_lbs_chip_info, | |
4929f5a8 | 582 | .irq = PXA_GPIO_TO_IRQ(GPIO36_ZIPITZ2_WIFI_IRQ), |
b6377992 MV |
583 | .max_speed_hz = 13000000, |
584 | .bus_num = 1, | |
585 | .chip_select = 0, | |
586 | }, | |
587 | { | |
588 | .modalias = "lms283gf05", | |
589 | .controller_data = &lms283_chip_info, | |
590 | .platform_data = &lms283_pdata, | |
591 | .max_speed_hz = 400000, | |
592 | .bus_num = 2, | |
593 | .chip_select = 0, | |
594 | }, | |
595 | }; | |
596 | ||
597 | static struct pxa2xx_spi_master pxa_ssp1_master_info = { | |
598 | .clock_enable = CKEN_SSP, | |
599 | .num_chipselect = 1, | |
600 | .enable_dma = 1, | |
601 | }; | |
602 | ||
603 | static struct pxa2xx_spi_master pxa_ssp2_master_info = { | |
604 | .clock_enable = CKEN_SSP2, | |
605 | .num_chipselect = 1, | |
606 | }; | |
607 | ||
608 | static void __init z2_spi_init(void) | |
609 | { | |
610 | pxa2xx_set_spi_info(1, &pxa_ssp1_master_info); | |
611 | pxa2xx_set_spi_info(2, &pxa_ssp2_master_info); | |
612 | spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); | |
613 | } | |
614 | #else | |
615 | static inline void z2_spi_init(void) {} | |
616 | #endif | |
617 | ||
320bbb86 MV |
618 | /****************************************************************************** |
619 | * Core power regulator | |
620 | ******************************************************************************/ | |
621 | #if defined(CONFIG_REGULATOR_TPS65023) || \ | |
622 | defined(CONFIG_REGULATOR_TPS65023_MODULE) | |
623 | static struct regulator_consumer_supply z2_tps65021_consumers[] = { | |
0bf189ab | 624 | REGULATOR_SUPPLY("vcc_core", NULL), |
320bbb86 MV |
625 | }; |
626 | ||
627 | static struct regulator_init_data z2_tps65021_info[] = { | |
628 | { | |
629 | .constraints = { | |
630 | .name = "vcc_core range", | |
631 | .min_uV = 800000, | |
632 | .max_uV = 1600000, | |
633 | .always_on = 1, | |
634 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, | |
635 | }, | |
636 | .consumer_supplies = z2_tps65021_consumers, | |
637 | .num_consumer_supplies = ARRAY_SIZE(z2_tps65021_consumers), | |
638 | }, { | |
639 | .constraints = { | |
640 | .name = "DCDC2", | |
641 | .min_uV = 3300000, | |
642 | .max_uV = 3300000, | |
643 | .always_on = 1, | |
644 | }, | |
645 | }, { | |
646 | .constraints = { | |
647 | .name = "DCDC3", | |
648 | .min_uV = 1800000, | |
649 | .max_uV = 1800000, | |
650 | .always_on = 1, | |
651 | }, | |
652 | }, { | |
653 | .constraints = { | |
654 | .name = "LDO1", | |
655 | .min_uV = 1000000, | |
656 | .max_uV = 3150000, | |
657 | .always_on = 1, | |
658 | }, | |
659 | }, { | |
660 | .constraints = { | |
661 | .name = "LDO2", | |
662 | .min_uV = 1050000, | |
663 | .max_uV = 3300000, | |
664 | .always_on = 1, | |
665 | }, | |
666 | } | |
667 | }; | |
668 | ||
669 | static struct i2c_board_info __initdata z2_pi2c_board_info[] = { | |
670 | { | |
671 | I2C_BOARD_INFO("tps65021", 0x48), | |
672 | .platform_data = &z2_tps65021_info, | |
673 | }, | |
674 | }; | |
675 | ||
676 | static void __init z2_pmic_init(void) | |
677 | { | |
678 | pxa27x_set_i2c_power_info(NULL); | |
679 | i2c_register_board_info(1, ARRAY_AND_SIZE(z2_pi2c_board_info)); | |
680 | } | |
681 | #else | |
682 | static inline void z2_pmic_init(void) {} | |
683 | #endif | |
684 | ||
41646b24 VK |
685 | #ifdef CONFIG_PM |
686 | static void z2_power_off(void) | |
687 | { | |
688 | /* We're using deep sleep as poweroff, so clear PSPR to ensure that | |
689 | * bootloader will jump to its entry point in resume handler | |
690 | */ | |
691 | PSPR = 0x0; | |
692 | local_irq_disable(); | |
ba4a90a6 EM |
693 | pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP); |
694 | pxa27x_cpu_pm_enter(PM_SUSPEND_MEM); | |
41646b24 VK |
695 | } |
696 | #else | |
697 | #define z2_power_off NULL | |
698 | #endif | |
699 | ||
b6377992 MV |
700 | /****************************************************************************** |
701 | * Machine init | |
702 | ******************************************************************************/ | |
703 | static void __init z2_init(void) | |
704 | { | |
705 | pxa2xx_mfp_config(ARRAY_AND_SIZE(z2_pin_config)); | |
706 | ||
d198290d MV |
707 | pxa_set_ffuart_info(NULL); |
708 | pxa_set_btuart_info(NULL); | |
709 | pxa_set_stuart_info(NULL); | |
710 | ||
b6377992 MV |
711 | z2_lcd_init(); |
712 | z2_mmc_init(); | |
713 | z2_mkp_init(); | |
d198290d | 714 | z2_i2c_init(); |
b6377992 MV |
715 | z2_spi_init(); |
716 | z2_nor_init(); | |
717 | z2_pwm_init(); | |
718 | z2_leds_init(); | |
719 | z2_keys_init(); | |
320bbb86 | 720 | z2_pmic_init(); |
41646b24 VK |
721 | |
722 | pm_power_off = z2_power_off; | |
b6377992 MV |
723 | } |
724 | ||
725 | MACHINE_START(ZIPIT2, "Zipit Z2") | |
7375aba6 | 726 | .atag_offset = 0x100, |
851982c1 | 727 | .map_io = pxa27x_map_io, |
4e611091 | 728 | .nr_irqs = PXA_NR_IRQS, |
b6377992 | 729 | .init_irq = pxa27x_init_irq, |
8a97ae2f | 730 | .handle_irq = pxa27x_handle_irq, |
6bb27d73 | 731 | .init_time = pxa_timer_init, |
b6377992 | 732 | .init_machine = z2_init, |
271a74fc | 733 | .restart = pxa_restart, |
b6377992 | 734 | MACHINE_END |