Commit | Line | Data |
---|---|---|
b6377992 MV |
1 | /* |
2 | * linux/arch/arm/mach-pxa/z2.c | |
3 | * | |
4 | * Support for the Zipit Z2 Handheld device. | |
5 | * | |
6 | * Author: Ken McGuire | |
7 | * Created: Jan 25, 2009 | |
8 | * Based on mainstone.c as modified for the Zipit Z2. | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or modify | |
11 | * it under the terms of the GNU General Public License version 2 as | |
12 | * published by the Free Software Foundation. | |
13 | */ | |
14 | ||
15 | #include <linux/platform_device.h> | |
16 | #include <linux/mtd/mtd.h> | |
17 | #include <linux/mtd/partitions.h> | |
18 | #include <linux/pwm_backlight.h> | |
19 | #include <linux/dma-mapping.h> | |
20 | #include <linux/spi/spi.h> | |
21 | #include <linux/spi/libertas_spi.h> | |
22 | #include <linux/spi/lms283gf05.h> | |
23 | #include <linux/power_supply.h> | |
24 | #include <linux/mtd/physmap.h> | |
25 | #include <linux/gpio.h> | |
26 | #include <linux/gpio_keys.h> | |
27 | #include <linux/delay.h> | |
28 | ||
29 | #include <asm/mach-types.h> | |
30 | #include <asm/mach/arch.h> | |
31 | ||
32 | #include <mach/pxa27x.h> | |
33 | #include <mach/mfp-pxa27x.h> | |
34 | #include <mach/z2.h> | |
35 | #include <mach/pxafb.h> | |
36 | #include <mach/mmc.h> | |
37 | #include <mach/pxa27x_keypad.h> | |
38 | #include <mach/pxa2xx_spi.h> | |
39 | ||
40 | #include <plat/i2c.h> | |
41 | ||
42 | #include "generic.h" | |
43 | #include "devices.h" | |
44 | ||
45 | /****************************************************************************** | |
46 | * Pin configuration | |
47 | ******************************************************************************/ | |
48 | static unsigned long z2_pin_config[] = { | |
49 | ||
50 | /* LCD - 16bpp Active TFT */ | |
51 | GPIO58_LCD_LDD_0, | |
52 | GPIO59_LCD_LDD_1, | |
53 | GPIO60_LCD_LDD_2, | |
54 | GPIO61_LCD_LDD_3, | |
55 | GPIO62_LCD_LDD_4, | |
56 | GPIO63_LCD_LDD_5, | |
57 | GPIO64_LCD_LDD_6, | |
58 | GPIO65_LCD_LDD_7, | |
59 | GPIO66_LCD_LDD_8, | |
60 | GPIO67_LCD_LDD_9, | |
61 | GPIO68_LCD_LDD_10, | |
62 | GPIO69_LCD_LDD_11, | |
63 | GPIO70_LCD_LDD_12, | |
64 | GPIO71_LCD_LDD_13, | |
65 | GPIO72_LCD_LDD_14, | |
66 | GPIO73_LCD_LDD_15, | |
67 | GPIO74_LCD_FCLK, | |
68 | GPIO75_LCD_LCLK, | |
69 | GPIO76_LCD_PCLK, | |
70 | GPIO77_LCD_BIAS, | |
71 | GPIO19_GPIO, /* LCD reset */ | |
72 | GPIO88_GPIO, /* LCD chipselect */ | |
73 | ||
74 | /* PWM */ | |
75 | GPIO115_PWM1_OUT, /* Keypad Backlight */ | |
76 | GPIO11_PWM2_OUT, /* LCD Backlight */ | |
77 | ||
78 | /* MMC */ | |
79 | GPIO32_MMC_CLK, | |
80 | GPIO112_MMC_CMD, | |
81 | GPIO92_MMC_DAT_0, | |
82 | GPIO109_MMC_DAT_1, | |
83 | GPIO110_MMC_DAT_2, | |
84 | GPIO111_MMC_DAT_3, | |
85 | GPIO96_GPIO, /* SD detect */ | |
86 | ||
87 | /* STUART */ | |
88 | GPIO46_STUART_RXD, | |
89 | GPIO47_STUART_TXD, | |
90 | ||
91 | /* Keypad */ | |
92 | GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, | |
93 | GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, | |
94 | GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, | |
95 | GPIO34_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, | |
96 | GPIO38_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH, | |
97 | GPIO16_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH, | |
98 | GPIO17_KP_MKIN_6 | WAKEUP_ON_LEVEL_HIGH, | |
99 | GPIO103_KP_MKOUT_0, | |
100 | GPIO104_KP_MKOUT_1, | |
101 | GPIO105_KP_MKOUT_2, | |
102 | GPIO106_KP_MKOUT_3, | |
103 | GPIO107_KP_MKOUT_4, | |
104 | GPIO108_KP_MKOUT_5, | |
105 | GPIO35_KP_MKOUT_6, | |
106 | GPIO41_KP_MKOUT_7, | |
107 | ||
108 | /* I2C */ | |
109 | GPIO117_I2C_SCL, | |
110 | GPIO118_I2C_SDA, | |
111 | ||
112 | /* SSP1 */ | |
113 | GPIO23_SSP1_SCLK, /* SSP1_SCK */ | |
114 | GPIO25_SSP1_TXD, /* SSP1_TXD */ | |
115 | GPIO26_SSP1_RXD, /* SSP1_RXD */ | |
116 | ||
117 | /* SSP2 */ | |
118 | GPIO22_SSP2_SCLK, /* SSP2_SCK */ | |
119 | GPIO13_SSP2_TXD, /* SSP2_TXD */ | |
120 | GPIO40_SSP2_RXD, /* SSP2_RXD */ | |
121 | ||
122 | /* LEDs */ | |
123 | GPIO10_GPIO, /* WiFi LED */ | |
124 | GPIO83_GPIO, /* Charging LED */ | |
125 | GPIO85_GPIO, /* Charged LED */ | |
126 | ||
127 | /* I2S */ | |
128 | GPIO28_I2S_BITCLK_OUT, | |
129 | GPIO29_I2S_SDATA_IN, | |
130 | GPIO30_I2S_SDATA_OUT, | |
131 | GPIO31_I2S_SYNC, | |
132 | GPIO113_I2S_SYSCLK, | |
133 | ||
134 | /* MISC */ | |
135 | GPIO0_GPIO, /* AC power detect */ | |
136 | GPIO1_GPIO, /* Power button */ | |
137 | GPIO37_GPIO, /* Headphone detect */ | |
138 | GPIO98_GPIO, /* Lid switch */ | |
139 | GPIO14_GPIO, /* WiFi Reset */ | |
140 | GPIO15_GPIO, /* WiFi Power */ | |
141 | GPIO24_GPIO, /* WiFi CS */ | |
142 | GPIO36_GPIO, /* WiFi IRQ */ | |
143 | GPIO88_GPIO, /* LCD CS */ | |
144 | }; | |
145 | ||
146 | /****************************************************************************** | |
147 | * NOR Flash | |
148 | ******************************************************************************/ | |
149 | #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) | |
150 | static struct resource z2_flash_resource = { | |
151 | .start = PXA_CS0_PHYS, | |
152 | .end = PXA_CS0_PHYS + SZ_8M - 1, | |
153 | .flags = IORESOURCE_MEM, | |
154 | }; | |
155 | ||
156 | static struct mtd_partition z2_flash_parts[] = { | |
157 | { | |
158 | .name = "U-Boot Bootloader", | |
159 | .offset = 0x0, | |
160 | .size = 0x20000, | |
161 | }, | |
162 | { | |
163 | .name = "Linux Kernel", | |
164 | .offset = 0x20000, | |
165 | .size = 0x220000, | |
166 | }, | |
167 | { | |
168 | .name = "Filesystem", | |
169 | .offset = 0x240000, | |
170 | .size = 0x5b0000, | |
171 | }, | |
172 | { | |
173 | .name = "U-Boot Environment", | |
174 | .offset = 0x7f0000, | |
175 | .size = MTDPART_SIZ_FULL, | |
176 | }, | |
177 | }; | |
178 | ||
179 | static struct physmap_flash_data z2_flash_data = { | |
180 | .width = 2, | |
181 | .parts = z2_flash_parts, | |
182 | .nr_parts = ARRAY_SIZE(z2_flash_parts), | |
183 | }; | |
184 | ||
185 | static struct platform_device z2_flash = { | |
186 | .name = "physmap-flash", | |
187 | .id = -1, | |
188 | .resource = &z2_flash_resource, | |
189 | .num_resources = 1, | |
190 | .dev = { | |
191 | .platform_data = &z2_flash_data, | |
192 | }, | |
193 | }; | |
194 | ||
195 | static void __init z2_nor_init(void) | |
196 | { | |
197 | platform_device_register(&z2_flash); | |
198 | } | |
199 | #else | |
200 | static inline void z2_nor_init(void) {} | |
201 | #endif | |
202 | ||
203 | /****************************************************************************** | |
204 | * Backlight | |
205 | ******************************************************************************/ | |
206 | #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) | |
207 | static struct platform_pwm_backlight_data z2_backlight_data[] = { | |
208 | [0] = { | |
209 | /* Keypad Backlight */ | |
210 | .pwm_id = 1, | |
211 | .max_brightness = 1023, | |
212 | .dft_brightness = 512, | |
213 | .pwm_period_ns = 1260320, | |
214 | }, | |
215 | [1] = { | |
216 | /* LCD Backlight */ | |
217 | .pwm_id = 2, | |
218 | .max_brightness = 1023, | |
219 | .dft_brightness = 512, | |
220 | .pwm_period_ns = 1260320, | |
221 | }, | |
222 | }; | |
223 | ||
224 | static struct platform_device z2_backlight_devices[2] = { | |
225 | { | |
226 | .name = "pwm-backlight", | |
227 | .id = 0, | |
228 | .dev = { | |
229 | .platform_data = &z2_backlight_data[1], | |
230 | }, | |
231 | }, | |
232 | { | |
233 | .name = "pwm-backlight", | |
234 | .id = 1, | |
235 | .dev = { | |
236 | .platform_data = &z2_backlight_data[0], | |
237 | }, | |
238 | }, | |
239 | }; | |
240 | static void __init z2_pwm_init(void) | |
241 | { | |
242 | platform_device_register(&z2_backlight_devices[0]); | |
243 | platform_device_register(&z2_backlight_devices[1]); | |
244 | } | |
245 | #else | |
246 | static inline void z2_pwm_init(void) {} | |
247 | #endif | |
248 | ||
249 | /****************************************************************************** | |
250 | * Framebuffer | |
251 | ******************************************************************************/ | |
252 | #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) | |
253 | static struct pxafb_mode_info z2_lcd_modes[] = { | |
254 | { | |
255 | .pixclock = 192000, | |
256 | .xres = 240, | |
257 | .yres = 320, | |
258 | .bpp = 16, | |
259 | ||
260 | .left_margin = 4, | |
261 | .right_margin = 8, | |
262 | .upper_margin = 4, | |
263 | .lower_margin = 8, | |
264 | ||
265 | .hsync_len = 4, | |
266 | .vsync_len = 4, | |
267 | }, | |
268 | }; | |
269 | ||
270 | static struct pxafb_mach_info z2_lcd_screen = { | |
271 | .modes = z2_lcd_modes, | |
272 | .num_modes = ARRAY_SIZE(z2_lcd_modes), | |
273 | .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_BIAS_ACTIVE_LOW | | |
274 | LCD_ALTERNATE_MAPPING, | |
275 | }; | |
276 | ||
277 | static void __init z2_lcd_init(void) | |
278 | { | |
279 | set_pxa_fb_info(&z2_lcd_screen); | |
280 | } | |
281 | #else | |
282 | static inline void z2_lcd_init(void) {} | |
283 | #endif | |
284 | ||
285 | /****************************************************************************** | |
286 | * SD/MMC card controller | |
287 | ******************************************************************************/ | |
288 | #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) | |
289 | static struct pxamci_platform_data z2_mci_platform_data = { | |
290 | .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, | |
291 | .gpio_card_detect = GPIO96_ZIPITZ2_SD_DETECT, | |
292 | .gpio_power = -1, | |
293 | .gpio_card_ro = -1, | |
294 | .detect_delay = 20, | |
295 | }; | |
296 | ||
297 | static void __init z2_mmc_init(void) | |
298 | { | |
299 | pxa_set_mci_info(&z2_mci_platform_data); | |
300 | } | |
301 | #else | |
302 | static inline void z2_mmc_init(void) {} | |
303 | #endif | |
304 | ||
305 | /****************************************************************************** | |
306 | * LEDs | |
307 | ******************************************************************************/ | |
308 | #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) | |
309 | struct gpio_led z2_gpio_leds[] = { | |
310 | { | |
311 | .name = "z2:green:wifi", | |
312 | .default_trigger = "none", | |
313 | .gpio = GPIO10_ZIPITZ2_LED_WIFI, | |
314 | .active_low = 1, | |
315 | }, { | |
316 | .name = "z2:green:charged", | |
317 | .default_trigger = "none", | |
318 | .gpio = GPIO85_ZIPITZ2_LED_CHARGED, | |
319 | .active_low = 1, | |
320 | }, { | |
321 | .name = "z2:amber:charging", | |
322 | .default_trigger = "none", | |
323 | .gpio = GPIO83_ZIPITZ2_LED_CHARGING, | |
324 | .active_low = 1, | |
325 | }, | |
326 | }; | |
327 | ||
328 | static struct gpio_led_platform_data z2_gpio_led_info = { | |
329 | .leds = z2_gpio_leds, | |
330 | .num_leds = ARRAY_SIZE(z2_gpio_leds), | |
331 | }; | |
332 | ||
333 | static struct platform_device z2_leds = { | |
334 | .name = "leds-gpio", | |
335 | .id = -1, | |
336 | .dev = { | |
337 | .platform_data = &z2_gpio_led_info, | |
338 | } | |
339 | }; | |
340 | ||
341 | static void __init z2_leds_init(void) | |
342 | { | |
343 | platform_device_register(&z2_leds); | |
344 | } | |
345 | #else | |
346 | static inline void z2_leds_init(void) {} | |
347 | #endif | |
348 | ||
349 | /****************************************************************************** | |
350 | * GPIO keyboard | |
351 | ******************************************************************************/ | |
352 | #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE) | |
353 | static unsigned int z2_matrix_keys[] = { | |
354 | KEY(0, 0, KEY_OPTION), | |
355 | KEY(1, 0, KEY_UP), | |
356 | KEY(2, 0, KEY_DOWN), | |
357 | KEY(3, 0, KEY_LEFT), | |
358 | KEY(4, 0, KEY_RIGHT), | |
359 | KEY(5, 0, KEY_END), | |
360 | KEY(6, 0, KEY_KPPLUS), | |
361 | ||
362 | KEY(0, 1, KEY_HOME), | |
363 | KEY(1, 1, KEY_Q), | |
364 | KEY(2, 1, KEY_I), | |
365 | KEY(3, 1, KEY_G), | |
366 | KEY(4, 1, KEY_X), | |
367 | KEY(5, 1, KEY_ENTER), | |
368 | KEY(6, 1, KEY_KPMINUS), | |
369 | ||
370 | KEY(0, 2, KEY_PAGEUP), | |
371 | KEY(1, 2, KEY_W), | |
372 | KEY(2, 2, KEY_O), | |
373 | KEY(3, 2, KEY_H), | |
374 | KEY(4, 2, KEY_C), | |
375 | KEY(5, 2, KEY_LEFTALT), | |
376 | ||
377 | KEY(0, 3, KEY_PAGEDOWN), | |
378 | KEY(1, 3, KEY_E), | |
379 | KEY(2, 3, KEY_P), | |
380 | KEY(3, 3, KEY_J), | |
381 | KEY(4, 3, KEY_V), | |
382 | KEY(5, 3, KEY_LEFTSHIFT), | |
383 | ||
384 | KEY(0, 4, KEY_ESC), | |
385 | KEY(1, 4, KEY_R), | |
386 | KEY(2, 4, KEY_A), | |
387 | KEY(3, 4, KEY_K), | |
388 | KEY(4, 4, KEY_B), | |
389 | KEY(5, 4, KEY_LEFTCTRL), | |
390 | ||
391 | KEY(0, 5, KEY_TAB), | |
392 | KEY(1, 5, KEY_T), | |
393 | KEY(2, 5, KEY_S), | |
394 | KEY(3, 5, KEY_L), | |
395 | KEY(4, 5, KEY_N), | |
396 | KEY(5, 5, KEY_SPACE), | |
397 | ||
398 | KEY(0, 6, KEY_STOPCD), | |
399 | KEY(1, 6, KEY_Y), | |
400 | KEY(2, 6, KEY_D), | |
401 | KEY(3, 6, KEY_BACKSPACE), | |
402 | KEY(4, 6, KEY_M), | |
403 | KEY(5, 6, KEY_COMMA), | |
404 | ||
405 | KEY(0, 7, KEY_PLAYCD), | |
406 | KEY(1, 7, KEY_U), | |
407 | KEY(2, 7, KEY_F), | |
408 | KEY(3, 7, KEY_Z), | |
409 | KEY(4, 7, KEY_SEMICOLON), | |
410 | KEY(5, 7, KEY_DOT), | |
411 | }; | |
412 | ||
413 | static struct pxa27x_keypad_platform_data z2_keypad_platform_data = { | |
414 | .matrix_key_rows = 7, | |
415 | .matrix_key_cols = 8, | |
416 | .matrix_key_map = z2_matrix_keys, | |
417 | .matrix_key_map_size = ARRAY_SIZE(z2_matrix_keys), | |
418 | ||
419 | .debounce_interval = 30, | |
420 | }; | |
421 | ||
422 | static void __init z2_mkp_init(void) | |
423 | { | |
424 | pxa_set_keypad_info(&z2_keypad_platform_data); | |
425 | } | |
426 | #else | |
427 | static inline void z2_mkp_init(void) {} | |
428 | #endif | |
429 | ||
430 | /****************************************************************************** | |
431 | * GPIO keys | |
432 | ******************************************************************************/ | |
433 | #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) | |
434 | static struct gpio_keys_button z2_pxa_buttons[] = { | |
435 | {KEY_POWER, GPIO1_ZIPITZ2_POWER_BUTTON, 0, "Power Button" }, | |
436 | {KEY_CLOSE, GPIO98_ZIPITZ2_LID_BUTTON, 0, "Lid Button" }, | |
437 | }; | |
438 | ||
439 | static struct gpio_keys_platform_data z2_pxa_keys_data = { | |
440 | .buttons = z2_pxa_buttons, | |
441 | .nbuttons = ARRAY_SIZE(z2_pxa_buttons), | |
442 | }; | |
443 | ||
444 | static struct platform_device z2_pxa_keys = { | |
445 | .name = "gpio-keys", | |
446 | .id = -1, | |
447 | .dev = { | |
448 | .platform_data = &z2_pxa_keys_data, | |
449 | }, | |
450 | }; | |
451 | ||
452 | static void __init z2_keys_init(void) | |
453 | { | |
454 | platform_device_register(&z2_pxa_keys); | |
455 | } | |
456 | #else | |
457 | static inline void z2_keys_init(void) {} | |
458 | #endif | |
459 | ||
460 | /****************************************************************************** | |
461 | * SSP Devices - WiFi and LCD control | |
462 | ******************************************************************************/ | |
463 | #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) | |
464 | /* WiFi */ | |
465 | static int z2_lbs_spi_setup(struct spi_device *spi) | |
466 | { | |
467 | int ret = 0; | |
468 | ||
469 | ret = gpio_request(GPIO15_ZIPITZ2_WIFI_POWER, "WiFi Power"); | |
470 | if (ret) | |
471 | goto err; | |
472 | ||
473 | ret = gpio_direction_output(GPIO15_ZIPITZ2_WIFI_POWER, 1); | |
474 | if (ret) | |
475 | goto err2; | |
476 | ||
477 | ret = gpio_request(GPIO14_ZIPITZ2_WIFI_RESET, "WiFi Reset"); | |
478 | if (ret) | |
479 | goto err2; | |
480 | ||
481 | ret = gpio_direction_output(GPIO14_ZIPITZ2_WIFI_RESET, 0); | |
482 | if (ret) | |
483 | goto err3; | |
484 | ||
485 | /* Reset the card */ | |
486 | mdelay(180); | |
487 | gpio_set_value(GPIO14_ZIPITZ2_WIFI_RESET, 1); | |
488 | mdelay(20); | |
489 | ||
490 | spi->bits_per_word = 16; | |
491 | spi->mode = SPI_MODE_2, | |
492 | ||
493 | spi_setup(spi); | |
494 | ||
495 | return 0; | |
496 | ||
497 | err3: | |
498 | gpio_free(GPIO14_ZIPITZ2_WIFI_RESET); | |
499 | err2: | |
500 | gpio_free(GPIO15_ZIPITZ2_WIFI_POWER); | |
501 | err: | |
502 | return ret; | |
503 | }; | |
504 | ||
505 | static int z2_lbs_spi_teardown(struct spi_device *spi) | |
506 | { | |
507 | gpio_set_value(GPIO14_ZIPITZ2_WIFI_RESET, 0); | |
508 | gpio_set_value(GPIO15_ZIPITZ2_WIFI_POWER, 0); | |
509 | gpio_free(GPIO14_ZIPITZ2_WIFI_RESET); | |
510 | gpio_free(GPIO15_ZIPITZ2_WIFI_POWER); | |
511 | return 0; | |
512 | ||
513 | }; | |
514 | ||
515 | static struct pxa2xx_spi_chip z2_lbs_chip_info = { | |
516 | .rx_threshold = 8, | |
517 | .tx_threshold = 8, | |
518 | .timeout = 1000, | |
519 | .gpio_cs = GPIO24_ZIPITZ2_WIFI_CS, | |
520 | }; | |
521 | ||
522 | static struct libertas_spi_platform_data z2_lbs_pdata = { | |
523 | .use_dummy_writes = 1, | |
524 | .setup = z2_lbs_spi_setup, | |
525 | .teardown = z2_lbs_spi_teardown, | |
526 | }; | |
527 | ||
528 | /* LCD */ | |
529 | static struct pxa2xx_spi_chip lms283_chip_info = { | |
530 | .rx_threshold = 1, | |
531 | .tx_threshold = 1, | |
532 | .timeout = 64, | |
533 | .gpio_cs = GPIO88_ZIPITZ2_LCD_CS, | |
534 | }; | |
535 | ||
536 | static const struct lms283gf05_pdata lms283_pdata = { | |
537 | .reset_gpio = GPIO19_ZIPITZ2_LCD_RESET, | |
538 | }; | |
539 | ||
540 | static struct spi_board_info spi_board_info[] __initdata = { | |
541 | { | |
542 | .modalias = "libertas_spi", | |
543 | .platform_data = &z2_lbs_pdata, | |
544 | .controller_data = &z2_lbs_chip_info, | |
545 | .irq = gpio_to_irq(GPIO36_ZIPITZ2_WIFI_IRQ), | |
546 | .max_speed_hz = 13000000, | |
547 | .bus_num = 1, | |
548 | .chip_select = 0, | |
549 | }, | |
550 | { | |
551 | .modalias = "lms283gf05", | |
552 | .controller_data = &lms283_chip_info, | |
553 | .platform_data = &lms283_pdata, | |
554 | .max_speed_hz = 400000, | |
555 | .bus_num = 2, | |
556 | .chip_select = 0, | |
557 | }, | |
558 | }; | |
559 | ||
560 | static struct pxa2xx_spi_master pxa_ssp1_master_info = { | |
561 | .clock_enable = CKEN_SSP, | |
562 | .num_chipselect = 1, | |
563 | .enable_dma = 1, | |
564 | }; | |
565 | ||
566 | static struct pxa2xx_spi_master pxa_ssp2_master_info = { | |
567 | .clock_enable = CKEN_SSP2, | |
568 | .num_chipselect = 1, | |
569 | }; | |
570 | ||
571 | static void __init z2_spi_init(void) | |
572 | { | |
573 | pxa2xx_set_spi_info(1, &pxa_ssp1_master_info); | |
574 | pxa2xx_set_spi_info(2, &pxa_ssp2_master_info); | |
575 | spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); | |
576 | } | |
577 | #else | |
578 | static inline void z2_spi_init(void) {} | |
579 | #endif | |
580 | ||
581 | /****************************************************************************** | |
582 | * Machine init | |
583 | ******************************************************************************/ | |
584 | static void __init z2_init(void) | |
585 | { | |
586 | pxa2xx_mfp_config(ARRAY_AND_SIZE(z2_pin_config)); | |
587 | ||
588 | z2_lcd_init(); | |
589 | z2_mmc_init(); | |
590 | z2_mkp_init(); | |
591 | ||
592 | pxa_set_i2c_info(NULL); | |
593 | ||
594 | z2_spi_init(); | |
595 | z2_nor_init(); | |
596 | z2_pwm_init(); | |
597 | z2_leds_init(); | |
598 | z2_keys_init(); | |
599 | } | |
600 | ||
601 | MACHINE_START(ZIPIT2, "Zipit Z2") | |
602 | .phys_io = 0x40000000, | |
603 | .boot_params = 0xa0000100, | |
604 | .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, | |
605 | .map_io = pxa_map_io, | |
606 | .init_irq = pxa27x_init_irq, | |
607 | .timer = &pxa_timer, | |
608 | .init_machine = z2_init, | |
609 | MACHINE_END |