Commit | Line | Data |
---|---|---|
a21765a7 | 1 | /* linux/arch/arm/mach-s3c2412/s3c2412.c |
68d9ab39 BD |
2 | * |
3 | * Copyright (c) 2006 Simtec Electronics | |
4 | * Ben Dooks <ben@simtec.co.uk> | |
5 | * | |
6 | * http://armlinux.simtec.co.uk/. | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or modify | |
9 | * it under the terms of the GNU General Public License version 2 as | |
10 | * published by the Free Software Foundation. | |
68d9ab39 BD |
11 | */ |
12 | ||
13 | #include <linux/kernel.h> | |
14 | #include <linux/types.h> | |
15 | #include <linux/interrupt.h> | |
16 | #include <linux/list.h> | |
17 | #include <linux/timer.h> | |
18 | #include <linux/init.h> | |
e425382e | 19 | #include <linux/clk.h> |
eca8c242 | 20 | #include <linux/delay.h> |
68d9ab39 | 21 | #include <linux/sysdev.h> |
b6d1f542 | 22 | #include <linux/serial_core.h> |
68d9ab39 | 23 | #include <linux/platform_device.h> |
fced80c7 | 24 | #include <linux/io.h> |
68d9ab39 BD |
25 | |
26 | #include <asm/mach/arch.h> | |
27 | #include <asm/mach/map.h> | |
28 | #include <asm/mach/irq.h> | |
29 | ||
a09e64fb | 30 | #include <mach/hardware.h> |
c84cbb24 | 31 | #include <asm/proc-fns.h> |
68d9ab39 BD |
32 | #include <asm/irq.h> |
33 | ||
a09e64fb RK |
34 | #include <mach/reset.h> |
35 | #include <mach/idle.h> | |
c84cbb24 | 36 | |
e425382e BD |
37 | #include <plat/cpu-freq.h> |
38 | ||
a09e64fb | 39 | #include <mach/regs-clock.h> |
a2b7ba9c | 40 | #include <plat/regs-serial.h> |
a09e64fb RK |
41 | #include <mach/regs-power.h> |
42 | #include <mach/regs-gpio.h> | |
43 | #include <mach/regs-gpioj.h> | |
44 | #include <mach/regs-dsc.h> | |
13622708 | 45 | #include <plat/regs-spi.h> |
a09e64fb | 46 | #include <mach/regs-s3c2412.h> |
68d9ab39 | 47 | |
d5120ae7 | 48 | #include <plat/s3c2412.h> |
a2b7ba9c BD |
49 | #include <plat/cpu.h> |
50 | #include <plat/devs.h> | |
d5120ae7 | 51 | #include <plat/clock.h> |
a2b7ba9c | 52 | #include <plat/pm.h> |
e24b864a | 53 | #include <plat/pll.h> |
ef3f2dd4 | 54 | #include <plat/nand-core.h> |
68d9ab39 BD |
55 | |
56 | #ifndef CONFIG_CPU_S3C2412_ONLY | |
57 | void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO; | |
50dedf16 BD |
58 | |
59 | static inline void s3c2412_init_gpio2(void) | |
60 | { | |
61 | s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10; | |
62 | } | |
63 | #else | |
64 | #define s3c2412_init_gpio2() do { } while(0) | |
68d9ab39 BD |
65 | #endif |
66 | ||
67 | /* Initial IO mappings */ | |
68 | ||
69 | static struct map_desc s3c2412_iodesc[] __initdata = { | |
70 | IODESC_ENT(CLKPWR), | |
68d9ab39 | 71 | IODESC_ENT(TIMER), |
68d9ab39 | 72 | IODESC_ENT(WATCHDOG), |
25400036 BD |
73 | { |
74 | .virtual = (unsigned long)S3C2412_VA_SSMC, | |
75 | .pfn = __phys_to_pfn(S3C2412_PA_SSMC), | |
76 | .length = SZ_1M, | |
77 | .type = MT_DEVICE, | |
78 | }, | |
79 | { | |
80 | .virtual = (unsigned long)S3C2412_VA_EBI, | |
81 | .pfn = __phys_to_pfn(S3C2412_PA_EBI), | |
82 | .length = SZ_1M, | |
83 | .type = MT_DEVICE, | |
84 | }, | |
68d9ab39 BD |
85 | }; |
86 | ||
87 | /* uart registration process */ | |
88 | ||
89 | void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no) | |
90 | { | |
91 | s3c24xx_init_uartdevs("s3c2412-uart", s3c2410_uart_resources, cfg, no); | |
92 | ||
93 | /* rename devices that are s3c2412/s3c2413 specific */ | |
94 | s3c_device_sdi.name = "s3c2412-sdi"; | |
72d70d06 | 95 | s3c_device_lcd.name = "s3c2412-lcd"; |
ef3f2dd4 | 96 | s3c_nand_setname("s3c2412-nand"); |
e903382c | 97 | |
f3fb5a55 BD |
98 | /* alter IRQ of SDI controller */ |
99 | ||
100 | s3c_device_sdi.resource[1].start = IRQ_S3C2412_SDI; | |
101 | s3c_device_sdi.resource[1].end = IRQ_S3C2412_SDI; | |
102 | ||
e903382c SSP |
103 | /* spi channel related changes, s3c2412/13 specific */ |
104 | s3c_device_spi0.name = "s3c2412-spi"; | |
105 | s3c_device_spi0.resource[0].end = S3C24XX_PA_SPI + 0x24; | |
106 | s3c_device_spi1.name = "s3c2412-spi"; | |
107 | s3c_device_spi1.resource[0].start = S3C24XX_PA_SPI + S3C2412_SPI1; | |
108 | s3c_device_spi1.resource[0].end = S3C24XX_PA_SPI + S3C2412_SPI1 + 0x24; | |
109 | ||
68d9ab39 BD |
110 | } |
111 | ||
c84cbb24 BD |
112 | /* s3c2412_idle |
113 | * | |
114 | * use the standard idle call by ensuring the idle mode | |
115 | * in power config, then issuing the idle co-processor | |
116 | * instruction | |
117 | */ | |
118 | ||
119 | static void s3c2412_idle(void) | |
120 | { | |
121 | unsigned long tmp; | |
122 | ||
123 | /* ensure our idle mode is to go to idle */ | |
124 | ||
125 | tmp = __raw_readl(S3C2412_PWRCFG); | |
126 | tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK; | |
127 | tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE; | |
128 | __raw_writel(tmp, S3C2412_PWRCFG); | |
129 | ||
130 | cpu_do_idle(); | |
131 | } | |
132 | ||
eca8c242 BD |
133 | static void s3c2412_hard_reset(void) |
134 | { | |
135 | /* errata "Watch-dog/Software Reset Problem" specifies that | |
136 | * this reset must be done with the SYSCLK sourced from | |
137 | * EXTCLK instead of FOUT to avoid a glitch in the reset | |
138 | * mechanism. | |
139 | * | |
140 | * See the watchdog section of the S3C2412 manual for more | |
141 | * information on this fix. | |
142 | */ | |
143 | ||
144 | __raw_writel(0x00, S3C2412_CLKSRC); | |
145 | __raw_writel(S3C2412_SWRST_RESET, S3C2412_SWRST); | |
146 | ||
147 | mdelay(1); | |
148 | } | |
149 | ||
68d9ab39 BD |
150 | /* s3c2412_map_io |
151 | * | |
152 | * register the standard cpu IO areas, and any passed in from the | |
153 | * machine specific initialisation. | |
154 | */ | |
155 | ||
74b265d4 | 156 | void __init s3c2412_map_io(void) |
68d9ab39 BD |
157 | { |
158 | /* move base of IO */ | |
159 | ||
50dedf16 | 160 | s3c2412_init_gpio2(); |
68d9ab39 | 161 | |
c84cbb24 BD |
162 | /* set our idle function */ |
163 | ||
164 | s3c24xx_idle = s3c2412_idle; | |
165 | ||
eca8c242 BD |
166 | /* set custom reset hook */ |
167 | ||
168 | s3c24xx_reset_hook = s3c2412_hard_reset; | |
169 | ||
68d9ab39 BD |
170 | /* register our io-tables */ |
171 | ||
172 | iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc)); | |
68d9ab39 BD |
173 | } |
174 | ||
e425382e | 175 | void __init_or_cpufreq s3c2412_setup_clocks(void) |
68d9ab39 | 176 | { |
e425382e | 177 | struct clk *xtal_clk; |
68d9ab39 | 178 | unsigned long tmp; |
e425382e | 179 | unsigned long xtal; |
68d9ab39 BD |
180 | unsigned long fclk; |
181 | unsigned long hclk; | |
182 | unsigned long pclk; | |
183 | ||
e425382e BD |
184 | xtal_clk = clk_get(NULL, "xtal"); |
185 | xtal = clk_get_rate(xtal_clk); | |
186 | clk_put(xtal_clk); | |
187 | ||
68d9ab39 BD |
188 | /* now we've got our machine bits initialised, work out what |
189 | * clocks we've got */ | |
190 | ||
e425382e | 191 | fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal * 2); |
68d9ab39 | 192 | |
cca851d7 BD |
193 | clk_mpll.rate = fclk; |
194 | ||
68d9ab39 BD |
195 | tmp = __raw_readl(S3C2410_CLKDIVN); |
196 | ||
197 | /* work out clock scalings */ | |
198 | ||
199 | hclk = fclk / ((tmp & S3C2412_CLKDIVN_HDIVN_MASK) + 1); | |
1017be88 | 200 | hclk /= ((tmp & S3C2412_CLKDIVN_ARMDIVN) ? 2 : 1); |
68d9ab39 BD |
201 | pclk = hclk / ((tmp & S3C2412_CLKDIVN_PDIVN) ? 2 : 1); |
202 | ||
203 | /* print brieft summary of clocks, etc */ | |
204 | ||
205 | printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n", | |
206 | print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); | |
207 | ||
e425382e BD |
208 | s3c24xx_setup_clocks(fclk, hclk, pclk); |
209 | } | |
210 | ||
211 | void __init s3c2412_init_clocks(int xtal) | |
212 | { | |
68d9ab39 BD |
213 | /* initialise the clocks here, to allow other things like the |
214 | * console to use them | |
215 | */ | |
216 | ||
e425382e BD |
217 | s3c24xx_register_baseclocks(xtal); |
218 | s3c2412_setup_clocks(); | |
68d9ab39 BD |
219 | s3c2412_baseclk_add(); |
220 | } | |
221 | ||
222 | /* need to register class before we actually register the device, and | |
223 | * we also need to ensure that it has been initialised before any of the | |
224 | * drivers even try to use it (even if not on an s3c2412 based system) | |
225 | * as a driver which may support both 2410 and 2440 may try and use it. | |
226 | */ | |
227 | ||
68d9ab39 | 228 | struct sysdev_class s3c2412_sysclass = { |
af5ca3f4 | 229 | .name = "s3c2412-core", |
68d9ab39 BD |
230 | }; |
231 | ||
232 | static int __init s3c2412_core_init(void) | |
233 | { | |
234 | return sysdev_class_register(&s3c2412_sysclass); | |
235 | } | |
236 | ||
237 | core_initcall(s3c2412_core_init); | |
238 | ||
239 | static struct sys_device s3c2412_sysdev = { | |
240 | .cls = &s3c2412_sysclass, | |
241 | }; | |
242 | ||
243 | int __init s3c2412_init(void) | |
244 | { | |
245 | printk("S3C2412: Initialising architecture\n"); | |
246 | ||
247 | return sysdev_register(&s3c2412_sysdev); | |
248 | } |