[deliverable/linux.git] / arch / arm / mach-s3c64xx / Kconfig

# Copyright 2008 Openmoko, Inc.
#	Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
#
# Licensed under GPLv2

# temporary until we can eliminate all drivers using it.
config PLAT_S3C64XX
	bool
	depends on ARCH_S3C64XX
	select SAMSUNG_WAKEMASK
	default y
	help
	  Base platform code for any Samsung S3C64XX device


# Configuration options for the S3C6410 CPU

config CPU_S3C6400
	bool
	help
	  Enable S3C6400 CPU support

config CPU_S3C6410
	bool
	help
	  Enable S3C6410 CPU support

config S3C64XX_DMA
	bool "S3C64XX DMA"
	select S3C_DMA

config S3C64XX_SETUP_SDHCI
	select S3C64XX_SETUP_SDHCI_GPIO
	bool
	help
	  Internal configuration for default SDHCI setup for S3C6400 and
	  S3C6410 SoCs.

config S3C64XX_DEV_ONENAND1
	bool
	help
	  Compile in platform device definition for OneNAND1 controller

# platform specific device setup

config S3C64XX_SETUP_I2C0
	bool
	default y
	help
	  Common setup code for i2c bus 0.

	  Note, currently since i2c0 is always compiled, this setup helper
	  is always compiled with it.

config S3C64XX_SETUP_I2C1
	bool
	help
	  Common setup code for i2c bus 1.

config S3C64XX_SETUP_IDE
	bool
	help
	  Common setup code for S3C64XX IDE.

config S3C64XX_SETUP_FB_24BPP
	bool
	help
	  Common setup code for S3C64XX with an 24bpp RGB display helper.

config S3C64XX_SETUP_KEYPAD
	bool
	help
	  Common setup code for S3C64XX KEYPAD GPIO configurations

config S3C64XX_SETUP_SDHCI_GPIO
	bool
	help
	  Common setup code for S3C64XX SDHCI GPIO configurations

# S36400 Macchine support

config MACH_SMDK6400
       bool "SMDK6400"
	select CPU_S3C6400
	select S3C_DEV_HSMMC
	select S3C_DEV_NAND
	select S3C64XX_SETUP_SDHCI
	help
	  Machine support for the Samsung SMDK6400

# S3C6410 machine support

config MACH_ANW6410
	bool "A&W6410"
	select CPU_S3C6410
	select S3C_DEV_FB
	select S3C64XX_SETUP_FB_24BPP
	help
	  Machine support for the A&W6410

config MACH_MINI6410
	bool "MINI6410"
	select CPU_S3C6410
	select S3C_DEV_HSMMC
	select S3C_DEV_HSMMC1
	select S3C64XX_SETUP_SDHCI
	select S3C_DEV_USB_HOST
	select S3C_DEV_NAND
	select S3C_DEV_FB
	select S3C64XX_SETUP_FB_24BPP
	select SAMSUNG_DEV_ADC
	select SAMSUNG_DEV_TS
	help
	  Machine support for the FriendlyARM MINI6410

config MACH_REAL6410
	bool "REAL6410"
	select CPU_S3C6410
	select S3C_DEV_HSMMC
	select S3C_DEV_HSMMC1
	select S3C64XX_SETUP_SDHCI
	select S3C_DEV_FB
	select S3C64XX_SETUP_FB_24BPP
	select S3C_DEV_NAND
	select SAMSUNG_DEV_ADC
	select SAMSUNG_DEV_TS
	select S3C_DEV_USB_HOST
	help
	  Machine support for the CoreWind REAL6410

config MACH_SMDK6410
	bool "SMDK6410"
	select CPU_S3C6410
	select SAMSUNG_DEV_ADC
	select S3C_DEV_HSMMC
	select S3C_DEV_HSMMC1
	select S3C_DEV_I2C1
	select SAMSUNG_DEV_IDE
	select S3C_DEV_FB
	select S3C_DEV_RTC
	select SAMSUNG_DEV_TS
	select S3C_DEV_USB_HOST
	select S3C_DEV_USB_HSOTG
	select S3C_DEV_WDT
	select SAMSUNG_DEV_BACKLIGHT
	select SAMSUNG_DEV_KEYPAD
	select SAMSUNG_DEV_PWM
	select HAVE_S3C2410_WATCHDOG if WATCHDOG
	select S3C64XX_SETUP_SDHCI
	select S3C64XX_SETUP_I2C1
	select S3C64XX_SETUP_IDE
	select S3C64XX_SETUP_FB_24BPP
	select S3C64XX_SETUP_KEYPAD
	help
	  Machine support for the Samsung SMDK6410

# At least some of the SMDK6410s were shipped with the card detect
# for the MMC/SD slots connected to the same input. This means that
# either the boards need to be altered to have channel0 to an alternate
# configuration or that only one slot can be used.

choice
	prompt "SMDK6410 MMC/SD slot setup"
	depends on MACH_SMDK6410

config SMDK6410_SD_CH0
	bool "Use channel 0 only"
	depends on MACH_SMDK6410
	help
          Select CON7 (channel 0) as the MMC/SD slot, as
	  at least some SMDK6410 boards come with the
	  resistors fitted so that the card detects for
	  channels 0 and 1 are the same.

config SMDK6410_SD_CH1
	bool "Use channel 1 only"
	depends on MACH_SMDK6410
	help
          Select CON6 (channel 1) as the MMC/SD slot, as
	  at least some SMDK6410 boards come with the
	  resistors fitted so that the card detects for
	  channels 0 and 1 are the same.

endchoice

config SMDK6410_WM1190_EV1
	bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
	depends on MACH_SMDK6410
	select REGULATOR
	select REGULATOR_WM8350
	select S3C24XX_GPIO_EXTRA64
	select MFD_WM8350_I2C
	select MFD_WM8350_CONFIG_MODE_0
	select MFD_WM8350_CONFIG_MODE_3
	select MFD_WM8352_CONFIG_MODE_0
	help
	  The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
	  and audio daughtercard for the Samsung SMDK6410 reference
	  platform.  Enabling this option will build support for this
	  module into the kernel.  The presence of the module will be
	  detected at runtime so the the resulting kernel can be used
	  with or without the 1190-EV1 fitted.

config SMDK6410_WM1192_EV1
	bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
	depends on MACH_SMDK6410
	select REGULATOR
	select REGULATOR_WM831X
	select S3C24XX_GPIO_EXTRA64
	select MFD_WM831X
	select MFD_WM831X_I2C
	help
	  The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
	  daughtercard for the Samsung SMDK6410 reference platform.
	  Enabling this option will build support for this module into
	  the kernel.  The presence of the daughtercard will be
	  detected at runtime so the the resulting kernel can be used
	  with or without the 1192-EV1 fitted.

config MACH_NCP
	bool "NCP"
	select CPU_S3C6410
	select S3C_DEV_I2C1
	select S3C_DEV_HSMMC1
	select S3C64XX_SETUP_I2C1
	help
          Machine support for the Samsung NCP

config MACH_HMT
	bool "Airgoo HMT"
	select CPU_S3C6410
	select S3C_DEV_FB
	select S3C_DEV_NAND
	select S3C_DEV_USB_HOST
	select S3C64XX_SETUP_FB_24BPP
	select SAMSUNG_DEV_PWM
	help
	  Machine support for the Airgoo HMT

config MACH_SMARTQ
	bool
	select CPU_S3C6410
	select S3C_DEV_HSMMC
	select S3C_DEV_HSMMC1
	select S3C_DEV_HSMMC2
	select S3C_DEV_FB
	select S3C_DEV_HWMON
	select S3C_DEV_RTC
	select S3C_DEV_USB_HSOTG
	select S3C_DEV_USB_HOST
	select S3C64XX_SETUP_SDHCI
	select S3C64XX_SETUP_FB_24BPP
	select SAMSUNG_DEV_ADC
	select SAMSUNG_DEV_PWM
	select SAMSUNG_DEV_TS
	help
	    Shared machine support for SmartQ 5/7

config MACH_SMARTQ5
	bool "SmartQ 5"
	select MACH_SMARTQ
	help
	    Machine support for the SmartQ 5

config MACH_SMARTQ7
	bool "SmartQ 7"
	select MACH_SMARTQ
	help
	    Machine support for the SmartQ 7

config MACH_WLF_CRAGG_6410
	bool "Wolfson Cragganmore 6410"
	select CPU_S3C6410
	select S3C64XX_SETUP_SDHCI
	select S3C64XX_SETUP_I2C1
	select S3C64XX_SETUP_IDE
	select S3C64XX_SETUP_FB_24BPP
	select S3C64XX_SETUP_KEYPAD
	select SAMSUNG_DEV_ADC
	select SAMSUNG_DEV_KEYPAD
	select S3C_DEV_USB_HOST
	select S3C_DEV_USB_HSOTG
	select S3C_DEV_HSMMC
	select S3C_DEV_HSMMC1
	select S3C_DEV_HSMMC2
	select S3C_DEV_I2C1
	select S3C_DEV_WDT
	select S3C_DEV_RTC
	select S3C64XX_DEV_SPI
	select S3C24XX_GPIO_EXTRA128
	select I2C
	help
	  Machine support for the Wolfson Cragganmore S3C6410 variant.
Commit	Line	Data
a08ab637	1	# Copyright 2008 Openmoko, Inc.
431107ea	2	# Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
a08ab637 BD	3	#
	4	# Licensed under GPLv2
	5
110d85ac BD	6	# temporary until we can eliminate all drivers using it.
	7	config PLAT_S3C64XX
	8	bool
	9	depends on ARCH_S3C64XX
fda22577	10	select SAMSUNG_WAKEMASK
110d85ac BD	11	default y
	12	help
	13	Base platform code for any Samsung S3C64XX device
	14
	15
a08ab637	16	# Configuration options for the S3C6410 CPU
d626aeed	17
431107ea BD	18	config CPU_S3C6400
431107ea BD	19	bool
431107ea BD	20	help
	21	Enable S3C6400 CPU support
	22
d626aeed BD	23	config CPU_S3C6410
	24	bool
	25	help
	26	Enable S3C6410 CPU support
	27
f7be9aba BD	28	config S3C64XX_DMA
	29	bool "S3C64XX DMA"
	30	select S3C_DMA
	31
2f6c2ac1	32	config S3C64XX_SETUP_SDHCI
4faf6867	33	select S3C64XX_SETUP_SDHCI_GPIO
2f6c2ac1	34	bool
5cc7fd88	35	help
2f6c2ac1 BD	36	Internal configuration for default SDHCI setup for S3C6400 and
2f6c2ac1 BD	37	S3C6410 SoCs.
5cc7fd88	38
999304be MS	39	config S3C64XX_DEV_ONENAND1
	40	bool
	41	help
	42	Compile in platform device definition for OneNAND1 controller
	43
88fc68a2 BD	44	# platform specific device setup
	45
	46	config S3C64XX_SETUP_I2C0
	47	bool
	48	default y
	49	help
	50	Common setup code for i2c bus 0.
	51
	52	Note, currently since i2c0 is always compiled, this setup helper
	53	is always compiled with it.
	54
	55	config S3C64XX_SETUP_I2C1
	56	bool
	57	help
	58	Common setup code for i2c bus 1.
	59
0ab0b6d2 AK	60	config S3C64XX_SETUP_IDE
	61	bool
	62	help
	63	Common setup code for S3C64XX IDE.
	64
88fc68a2 BD	65	config S3C64XX_SETUP_FB_24BPP
	66	bool
	67	help
	68	Common setup code for S3C64XX with an 24bpp RGB display helper.
	69
290d0983 NKC	70	config S3C64XX_SETUP_KEYPAD
	71	bool
	72	help
	73	Common setup code for S3C64XX KEYPAD GPIO configurations
	74
88fc68a2 BD	75	config S3C64XX_SETUP_SDHCI_GPIO
	76	bool
	77	help
	78	Common setup code for S3C64XX SDHCI GPIO configurations
	79
431107ea BD	80	# S36400 Macchine support
	81
	82	config MACH_SMDK6400
	83	bool "SMDK6400"
	84	select CPU_S3C6400
	85	select S3C_DEV_HSMMC
	86	select S3C_DEV_NAND
2f6c2ac1	87	select S3C64XX_SETUP_SDHCI
431107ea BD	88	help
	89	Machine support for the Samsung SMDK6400
	90
	91	# S3C6410 machine support
	92
1f26a8a0 KL	93	config MACH_ANW6410
	94	bool "A&W6410"
	95	select CPU_S3C6410
	96	select S3C_DEV_FB
	97	select S3C64XX_SETUP_FB_24BPP
	98	help
	99	Machine support for the A&W6410
	100
e9debd98 DA	101	config MACH_MINI6410
	102	bool "MINI6410"
	103	select CPU_S3C6410
	104	select S3C_DEV_HSMMC
	105	select S3C_DEV_HSMMC1
	106	select S3C64XX_SETUP_SDHCI
	107	select S3C_DEV_USB_HOST
1c5d76ef	108	select S3C_DEV_NAND
2abca87c DA	109	select S3C_DEV_FB
2abca87c DA	110	select S3C64XX_SETUP_FB_24BPP
fe894f97 DA	111	select SAMSUNG_DEV_ADC
fe894f97 DA	112	select SAMSUNG_DEV_TS
e9debd98 DA	113	help
	114	Machine support for the FriendlyARM MINI6410
	115
eab5cfa0 DA	116	config MACH_REAL6410
	117	bool "REAL6410"
	118	select CPU_S3C6410
ce611d7b DA	119	select S3C_DEV_HSMMC
	120	select S3C_DEV_HSMMC1
	121	select S3C64XX_SETUP_SDHCI
c115f67c DA	122	select S3C_DEV_FB
c115f67c DA	123	select S3C64XX_SETUP_FB_24BPP
88fbadea	124	select S3C_DEV_NAND
4374c456 DA	125	select SAMSUNG_DEV_ADC
4374c456 DA	126	select SAMSUNG_DEV_TS
10dcc7a2	127	select S3C_DEV_USB_HOST
eab5cfa0 DA	128	help
	129	Machine support for the CoreWind REAL6410
	130
5718df9d BD	131	config MACH_SMDK6410
	132	bool "SMDK6410"
	133	select CPU_S3C6410
4f7cdc38	134	select SAMSUNG_DEV_ADC
5b323c7b	135	select S3C_DEV_HSMMC
b24636cf	136	select S3C_DEV_HSMMC1
d7ea3743	137	select S3C_DEV_I2C1
0ab0b6d2	138	select SAMSUNG_DEV_IDE
438a5d42	139	select S3C_DEV_FB
9bbf4a63	140	select S3C_DEV_RTC
85b14a3f	141	select SAMSUNG_DEV_TS
98fd63ba	142	select S3C_DEV_USB_HOST
06fa1d37	143	select S3C_DEV_USB_HSOTG
b351c4a1	144	select S3C_DEV_WDT
96d78686	145	select SAMSUNG_DEV_BACKLIGHT
290d0983	146	select SAMSUNG_DEV_KEYPAD
075d1089	147	select SAMSUNG_DEV_PWM
c39d8d55	148	select HAVE_S3C2410_WATCHDOG if WATCHDOG
2f6c2ac1	149	select S3C64XX_SETUP_SDHCI
d7ea3743	150	select S3C64XX_SETUP_I2C1
0ab0b6d2	151	select S3C64XX_SETUP_IDE
438a5d42	152	select S3C64XX_SETUP_FB_24BPP
290d0983	153	select S3C64XX_SETUP_KEYPAD
5718df9d BD	154	help
5718df9d BD	155	Machine support for the Samsung SMDK6410
b24636cf BD	156
	157	# At least some of the SMDK6410s were shipped with the card detect
	158	# for the MMC/SD slots connected to the same input. This means that
	159	# either the boards need to be altered to have channel0 to an alternate
	160	# configuration or that only one slot can be used.
	161
	162	choice
	163	prompt "SMDK6410 MMC/SD slot setup"
	164	depends on MACH_SMDK6410
	165
	166	config SMDK6410_SD_CH0
	167	bool "Use channel 0 only"
	168	depends on MACH_SMDK6410
	169	help
	170	Select CON7 (channel 0) as the MMC/SD slot, as
	171	at least some SMDK6410 boards come with the
	172	resistors fitted so that the card detects for
	173	channels 0 and 1 are the same.
431107ea	174
b24636cf BD	175	config SMDK6410_SD_CH1
	176	bool "Use channel 1 only"
	177	depends on MACH_SMDK6410
	178	help
	179	Select CON6 (channel 1) as the MMC/SD slot, as
	180	at least some SMDK6410 boards come with the
	181	resistors fitted so that the card detects for
	182	channels 0 and 1 are the same.
	183
	184	endchoice
ecc558ac MB	185
	186	config SMDK6410_WM1190_EV1
	187	bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
	188	depends on MACH_SMDK6410
	189	select REGULATOR
	190	select REGULATOR_WM8350
c7a19787	191	select S3C24XX_GPIO_EXTRA64
ecc558ac MB	192	select MFD_WM8350_I2C
	193	select MFD_WM8350_CONFIG_MODE_0
	194	select MFD_WM8350_CONFIG_MODE_3
	195	select MFD_WM8352_CONFIG_MODE_0
	196	help
	197	The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
	198	and audio daughtercard for the Samsung SMDK6410 reference
	199	platform. Enabling this option will build support for this
	200	module into the kernel. The presence of the module will be
	201	detected at runtime so the the resulting kernel can be used
	202	with or without the 1190-EV1 fitted.
87c4122f	203
60f9101a MB	204	config SMDK6410_WM1192_EV1
	205	bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
	206	depends on MACH_SMDK6410
	207	select REGULATOR
	208	select REGULATOR_WM831X
	209	select S3C24XX_GPIO_EXTRA64
	210	select MFD_WM831X
e5b48684	211	select MFD_WM831X_I2C
60f9101a MB	212	help
	213	The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
	214	daughtercard for the Samsung SMDK6410 reference platform.
	215	Enabling this option will build support for this module into
	216	the kernel. The presence of the daughtercard will be
	217	detected at runtime so the the resulting kernel can be used
	218	with or without the 1192-EV1 fitted.
	219
87c4122f KP	220	config MACH_NCP
	221	bool "NCP"
	222	select CPU_S3C6410
	223	select S3C_DEV_I2C1
	224	select S3C_DEV_HSMMC1
	225	select S3C64XX_SETUP_I2C1
	226	help
	227	Machine support for the Samsung NCP
2896bda4 PK	228
	229	config MACH_HMT
	230	bool "Airgoo HMT"
	231	select CPU_S3C6410
	232	select S3C_DEV_FB
d23b3517	233	select S3C_DEV_NAND
2896bda4 PK	234	select S3C_DEV_USB_HOST
2896bda4 PK	235	select S3C64XX_SETUP_FB_24BPP
2ce30137	236	select SAMSUNG_DEV_PWM
2896bda4 PK	237	help
2896bda4 PK	238	Machine support for the Airgoo HMT
a2f7bffa MC	239
	240	config MACH_SMARTQ
	241	bool
	242	select CPU_S3C6410
	243	select S3C_DEV_HSMMC
	244	select S3C_DEV_HSMMC1
	245	select S3C_DEV_HSMMC2
	246	select S3C_DEV_FB
	247	select S3C_DEV_HWMON
	248	select S3C_DEV_RTC
	249	select S3C_DEV_USB_HSOTG
	250	select S3C_DEV_USB_HOST
	251	select S3C64XX_SETUP_SDHCI
	252	select S3C64XX_SETUP_FB_24BPP
	253	select SAMSUNG_DEV_ADC
2ce30137	254	select SAMSUNG_DEV_PWM
a2f7bffa	255	select SAMSUNG_DEV_TS
a2f7bffa MC	256	help
	257	Shared machine support for SmartQ 5/7
	258
	259	config MACH_SMARTQ5
	260	bool "SmartQ 5"
	261	select MACH_SMARTQ
	262	help
	263	Machine support for the SmartQ 5
	264
	265	config MACH_SMARTQ7
	266	bool "SmartQ 7"
	267	select MACH_SMARTQ
	268	help
	269	Machine support for the SmartQ 7
e1a3c74f MB	270
	271	config MACH_WLF_CRAGG_6410
	272	bool "Wolfson Cragganmore 6410"
	273	select CPU_S3C6410
	274	select S3C64XX_SETUP_SDHCI
	275	select S3C64XX_SETUP_I2C1
	276	select S3C64XX_SETUP_IDE
	277	select S3C64XX_SETUP_FB_24BPP
	278	select S3C64XX_SETUP_KEYPAD
	279	select SAMSUNG_DEV_ADC
	280	select SAMSUNG_DEV_KEYPAD
	281	select S3C_DEV_USB_HOST
	282	select S3C_DEV_USB_HSOTG
	283	select S3C_DEV_HSMMC
	284	select S3C_DEV_HSMMC1
	285	select S3C_DEV_HSMMC2
	286	select S3C_DEV_I2C1
	287	select S3C_DEV_WDT
	288	select S3C_DEV_RTC
	289	select S3C64XX_DEV_SPI
	290	select S3C24XX_GPIO_EXTRA128
d0f0b43f	291	select I2C
e1a3c74f MB	292	help
e1a3c74f MB	293	Machine support for the Wolfson Cragganmore S3C6410 variant.