Commit | Line | Data |
---|---|---|
d947e792 MS |
1 | /* linux/arch/arm/mach-s5pv210/mach-aquila.c |
2 | * | |
3 | * Copyright (c) 2010 Samsung Electronics Co., Ltd. | |
4 | * http://www.samsung.com/ | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License version 2 as | |
8 | * published by the Free Software Foundation. | |
9 | */ | |
10 | ||
11 | #include <linux/kernel.h> | |
12 | #include <linux/types.h> | |
13 | #include <linux/init.h> | |
14 | #include <linux/serial_core.h> | |
b315032f | 15 | #include <linux/fb.h> |
a1660c12 MS |
16 | #include <linux/i2c.h> |
17 | #include <linux/i2c-gpio.h> | |
18 | #include <linux/mfd/max8998.h> | |
80849798 CC |
19 | #include <linux/mfd/wm8994/pdata.h> |
20 | #include <linux/regulator/fixed.h> | |
a1660c12 MS |
21 | #include <linux/gpio_keys.h> |
22 | #include <linux/input.h> | |
23 | #include <linux/gpio.h> | |
d947e792 MS |
24 | |
25 | #include <asm/mach/arch.h> | |
26 | #include <asm/mach/map.h> | |
27 | #include <asm/setup.h> | |
28 | #include <asm/mach-types.h> | |
29 | ||
30 | #include <mach/map.h> | |
31 | #include <mach/regs-clock.h> | |
b315032f | 32 | #include <mach/regs-fb.h> |
d947e792 | 33 | |
a1660c12 | 34 | #include <plat/gpio-cfg.h> |
d947e792 MS |
35 | #include <plat/regs-serial.h> |
36 | #include <plat/s5pv210.h> | |
37 | #include <plat/devs.h> | |
38 | #include <plat/cpu.h> | |
b315032f | 39 | #include <plat/fb.h> |
187749bb | 40 | #include <plat/fimc-core.h> |
ba3fbef9 | 41 | #include <plat/sdhci.h> |
d947e792 MS |
42 | |
43 | /* Following are default values for UCON, ULCON and UFCON UART registers */ | |
c8def085 | 44 | #define AQUILA_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ |
d947e792 MS |
45 | S3C2410_UCON_RXILEVEL | \ |
46 | S3C2410_UCON_TXIRQMODE | \ | |
47 | S3C2410_UCON_RXIRQMODE | \ | |
48 | S3C2410_UCON_RXFIFO_TOI | \ | |
49 | S3C2443_UCON_RXERR_IRQEN) | |
50 | ||
c8def085 | 51 | #define AQUILA_ULCON_DEFAULT S3C2410_LCON_CS8 |
d947e792 | 52 | |
f2b7e3c5 | 53 | #define AQUILA_UFCON_DEFAULT S3C2410_UFCON_FIFOMODE |
d947e792 | 54 | |
df01714a | 55 | static struct s3c2410_uartcfg aquila_uartcfgs[] __initdata = { |
d947e792 MS |
56 | [0] = { |
57 | .hwport = 0, | |
58 | .flags = 0, | |
c8def085 KK |
59 | .ucon = AQUILA_UCON_DEFAULT, |
60 | .ulcon = AQUILA_ULCON_DEFAULT, | |
df01714a JS |
61 | /* |
62 | * Actually UART0 can support 256 bytes fifo, but aquila board | |
63 | * supports 128 bytes fifo because of initial chip bug | |
64 | */ | |
f2b7e3c5 | 65 | .ufcon = AQUILA_UFCON_DEFAULT | |
df01714a | 66 | S5PV210_UFCON_TXTRIG128 | S5PV210_UFCON_RXTRIG128, |
d947e792 MS |
67 | }, |
68 | [1] = { | |
69 | .hwport = 1, | |
70 | .flags = 0, | |
c8def085 KK |
71 | .ucon = AQUILA_UCON_DEFAULT, |
72 | .ulcon = AQUILA_ULCON_DEFAULT, | |
f2b7e3c5 | 73 | .ufcon = AQUILA_UFCON_DEFAULT | |
df01714a | 74 | S5PV210_UFCON_TXTRIG64 | S5PV210_UFCON_RXTRIG64, |
d947e792 MS |
75 | }, |
76 | [2] = { | |
77 | .hwport = 2, | |
78 | .flags = 0, | |
c8def085 KK |
79 | .ucon = AQUILA_UCON_DEFAULT, |
80 | .ulcon = AQUILA_ULCON_DEFAULT, | |
f2b7e3c5 | 81 | .ufcon = AQUILA_UFCON_DEFAULT | |
df01714a | 82 | S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16, |
d947e792 MS |
83 | }, |
84 | [3] = { | |
85 | .hwport = 3, | |
86 | .flags = 0, | |
c8def085 KK |
87 | .ucon = AQUILA_UCON_DEFAULT, |
88 | .ulcon = AQUILA_ULCON_DEFAULT, | |
f2b7e3c5 | 89 | .ufcon = AQUILA_UFCON_DEFAULT | |
df01714a | 90 | S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16, |
d947e792 MS |
91 | }, |
92 | }; | |
93 | ||
b315032f MS |
94 | /* Frame Buffer */ |
95 | static struct s3c_fb_pd_win aquila_fb_win0 = { | |
96 | .win_mode = { | |
b315032f MS |
97 | .left_margin = 16, |
98 | .right_margin = 16, | |
99 | .upper_margin = 3, | |
100 | .lower_margin = 28, | |
101 | .hsync_len = 2, | |
102 | .vsync_len = 2, | |
103 | .xres = 480, | |
104 | .yres = 800, | |
105 | }, | |
106 | .max_bpp = 32, | |
107 | .default_bpp = 16, | |
108 | }; | |
109 | ||
110 | static struct s3c_fb_pd_win aquila_fb_win1 = { | |
111 | .win_mode = { | |
b315032f MS |
112 | .left_margin = 16, |
113 | .right_margin = 16, | |
114 | .upper_margin = 3, | |
115 | .lower_margin = 28, | |
116 | .hsync_len = 2, | |
117 | .vsync_len = 2, | |
118 | .xres = 480, | |
119 | .yres = 800, | |
120 | }, | |
121 | .max_bpp = 32, | |
122 | .default_bpp = 16, | |
123 | }; | |
124 | ||
125 | static struct s3c_fb_platdata aquila_lcd_pdata __initdata = { | |
126 | .win[0] = &aquila_fb_win0, | |
127 | .win[1] = &aquila_fb_win1, | |
128 | .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, | |
129 | .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC | | |
130 | VIDCON1_INV_VCLK | VIDCON1_INV_VDEN, | |
131 | .setup_gpio = s5pv210_fb_gpio_setup_24bpp, | |
132 | }; | |
133 | ||
a1660c12 MS |
134 | /* MAX8998 regulators */ |
135 | #if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE) | |
136 | ||
137 | static struct regulator_init_data aquila_ldo2_data = { | |
138 | .constraints = { | |
139 | .name = "VALIVE_1.1V", | |
140 | .min_uV = 1100000, | |
141 | .max_uV = 1100000, | |
142 | .apply_uV = 1, | |
143 | .always_on = 1, | |
144 | .state_mem = { | |
145 | .enabled = 1, | |
146 | }, | |
147 | }, | |
148 | }; | |
149 | ||
150 | static struct regulator_init_data aquila_ldo3_data = { | |
151 | .constraints = { | |
152 | .name = "VUSB/MIPI_1.1V", | |
153 | .min_uV = 1100000, | |
154 | .max_uV = 1100000, | |
155 | .apply_uV = 1, | |
156 | .always_on = 1, | |
157 | }, | |
158 | }; | |
159 | ||
160 | static struct regulator_init_data aquila_ldo4_data = { | |
161 | .constraints = { | |
162 | .name = "VDAC_3.3V", | |
163 | .min_uV = 3300000, | |
164 | .max_uV = 3300000, | |
165 | .apply_uV = 1, | |
166 | }, | |
167 | }; | |
168 | ||
169 | static struct regulator_init_data aquila_ldo5_data = { | |
170 | .constraints = { | |
171 | .name = "VTF_2.8V", | |
172 | .min_uV = 2800000, | |
173 | .max_uV = 2800000, | |
174 | .apply_uV = 1, | |
175 | }, | |
176 | }; | |
177 | ||
178 | static struct regulator_init_data aquila_ldo6_data = { | |
179 | .constraints = { | |
180 | .name = "VCC_3.3V", | |
181 | .min_uV = 3300000, | |
182 | .max_uV = 3300000, | |
183 | .apply_uV = 1, | |
184 | }, | |
185 | }; | |
186 | ||
187 | static struct regulator_init_data aquila_ldo7_data = { | |
188 | .constraints = { | |
189 | .name = "VCC_3.0V", | |
190 | .min_uV = 3000000, | |
191 | .max_uV = 3000000, | |
192 | .apply_uV = 1, | |
193 | .boot_on = 1, | |
194 | .always_on = 1, | |
195 | }, | |
196 | }; | |
197 | ||
198 | static struct regulator_init_data aquila_ldo8_data = { | |
199 | .constraints = { | |
200 | .name = "VUSB/VADC_3.3V", | |
201 | .min_uV = 3300000, | |
202 | .max_uV = 3300000, | |
203 | .apply_uV = 1, | |
204 | .always_on = 1, | |
205 | }, | |
206 | }; | |
207 | ||
208 | static struct regulator_init_data aquila_ldo9_data = { | |
209 | .constraints = { | |
210 | .name = "VCC/VCAM_2.8V", | |
211 | .min_uV = 2800000, | |
212 | .max_uV = 2800000, | |
213 | .apply_uV = 1, | |
214 | .always_on = 1, | |
215 | }, | |
216 | }; | |
217 | ||
218 | static struct regulator_init_data aquila_ldo10_data = { | |
219 | .constraints = { | |
220 | .name = "VPLL_1.1V", | |
221 | .min_uV = 1100000, | |
222 | .max_uV = 1100000, | |
223 | .apply_uV = 1, | |
224 | .boot_on = 1, | |
225 | }, | |
226 | }; | |
227 | ||
228 | static struct regulator_init_data aquila_ldo11_data = { | |
229 | .constraints = { | |
230 | .name = "CAM_IO_2.8V", | |
231 | .min_uV = 2800000, | |
232 | .max_uV = 2800000, | |
233 | .apply_uV = 1, | |
234 | .always_on = 1, | |
235 | }, | |
236 | }; | |
237 | ||
238 | static struct regulator_init_data aquila_ldo12_data = { | |
239 | .constraints = { | |
240 | .name = "CAM_ISP_1.2V", | |
241 | .min_uV = 1200000, | |
242 | .max_uV = 1200000, | |
243 | .apply_uV = 1, | |
244 | .always_on = 1, | |
245 | }, | |
246 | }; | |
247 | ||
248 | static struct regulator_init_data aquila_ldo13_data = { | |
249 | .constraints = { | |
250 | .name = "CAM_A_2.8V", | |
251 | .min_uV = 2800000, | |
252 | .max_uV = 2800000, | |
253 | .apply_uV = 1, | |
254 | .always_on = 1, | |
255 | }, | |
256 | }; | |
257 | ||
258 | static struct regulator_init_data aquila_ldo14_data = { | |
259 | .constraints = { | |
260 | .name = "CAM_CIF_1.8V", | |
261 | .min_uV = 1800000, | |
262 | .max_uV = 1800000, | |
263 | .apply_uV = 1, | |
264 | .always_on = 1, | |
265 | }, | |
266 | }; | |
267 | ||
268 | static struct regulator_init_data aquila_ldo15_data = { | |
269 | .constraints = { | |
270 | .name = "CAM_AF_3.3V", | |
271 | .min_uV = 3300000, | |
272 | .max_uV = 3300000, | |
273 | .apply_uV = 1, | |
274 | .always_on = 1, | |
275 | }, | |
276 | }; | |
277 | ||
278 | static struct regulator_init_data aquila_ldo16_data = { | |
279 | .constraints = { | |
280 | .name = "VMIPI_1.8V", | |
281 | .min_uV = 1800000, | |
282 | .max_uV = 1800000, | |
283 | .apply_uV = 1, | |
284 | .always_on = 1, | |
285 | }, | |
286 | }; | |
287 | ||
288 | static struct regulator_init_data aquila_ldo17_data = { | |
289 | .constraints = { | |
290 | .name = "CAM_8M_1.8V", | |
291 | .min_uV = 1800000, | |
292 | .max_uV = 1800000, | |
293 | .apply_uV = 1, | |
294 | .always_on = 1, | |
295 | }, | |
296 | }; | |
297 | ||
298 | /* BUCK */ | |
299 | static struct regulator_consumer_supply buck1_consumer[] = { | |
300 | { .supply = "vddarm", }, | |
301 | }; | |
302 | ||
303 | static struct regulator_consumer_supply buck2_consumer[] = { | |
304 | { .supply = "vddint", }, | |
305 | }; | |
306 | ||
307 | static struct regulator_init_data aquila_buck1_data = { | |
308 | .constraints = { | |
309 | .name = "VARM_1.2V", | |
310 | .min_uV = 1200000, | |
311 | .max_uV = 1200000, | |
312 | .apply_uV = 1, | |
313 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | | |
314 | REGULATOR_CHANGE_STATUS, | |
315 | }, | |
316 | .num_consumer_supplies = ARRAY_SIZE(buck1_consumer), | |
317 | .consumer_supplies = buck1_consumer, | |
318 | }; | |
319 | ||
320 | static struct regulator_init_data aquila_buck2_data = { | |
321 | .constraints = { | |
322 | .name = "VINT_1.2V", | |
323 | .min_uV = 1200000, | |
324 | .max_uV = 1200000, | |
325 | .apply_uV = 1, | |
326 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | | |
327 | REGULATOR_CHANGE_STATUS, | |
328 | }, | |
329 | .num_consumer_supplies = ARRAY_SIZE(buck2_consumer), | |
330 | .consumer_supplies = buck2_consumer, | |
331 | }; | |
332 | ||
333 | static struct regulator_init_data aquila_buck3_data = { | |
334 | .constraints = { | |
335 | .name = "VCC_1.8V", | |
336 | .min_uV = 1800000, | |
337 | .max_uV = 1800000, | |
338 | .apply_uV = 1, | |
339 | .state_mem = { | |
340 | .enabled = 1, | |
341 | }, | |
342 | }, | |
343 | }; | |
344 | ||
345 | static struct regulator_init_data aquila_buck4_data = { | |
346 | .constraints = { | |
347 | .name = "CAM_CORE_1.2V", | |
348 | .min_uV = 1200000, | |
349 | .max_uV = 1200000, | |
350 | .apply_uV = 1, | |
351 | .always_on = 1, | |
352 | }, | |
353 | }; | |
354 | ||
355 | static struct max8998_regulator_data aquila_regulators[] = { | |
356 | { MAX8998_LDO2, &aquila_ldo2_data }, | |
357 | { MAX8998_LDO3, &aquila_ldo3_data }, | |
358 | { MAX8998_LDO4, &aquila_ldo4_data }, | |
359 | { MAX8998_LDO5, &aquila_ldo5_data }, | |
360 | { MAX8998_LDO6, &aquila_ldo6_data }, | |
361 | { MAX8998_LDO7, &aquila_ldo7_data }, | |
362 | { MAX8998_LDO8, &aquila_ldo8_data }, | |
363 | { MAX8998_LDO9, &aquila_ldo9_data }, | |
364 | { MAX8998_LDO10, &aquila_ldo10_data }, | |
365 | { MAX8998_LDO11, &aquila_ldo11_data }, | |
366 | { MAX8998_LDO12, &aquila_ldo12_data }, | |
367 | { MAX8998_LDO13, &aquila_ldo13_data }, | |
368 | { MAX8998_LDO14, &aquila_ldo14_data }, | |
369 | { MAX8998_LDO15, &aquila_ldo15_data }, | |
370 | { MAX8998_LDO16, &aquila_ldo16_data }, | |
371 | { MAX8998_LDO17, &aquila_ldo17_data }, | |
372 | { MAX8998_BUCK1, &aquila_buck1_data }, | |
373 | { MAX8998_BUCK2, &aquila_buck2_data }, | |
374 | { MAX8998_BUCK3, &aquila_buck3_data }, | |
375 | { MAX8998_BUCK4, &aquila_buck4_data }, | |
376 | }; | |
377 | ||
378 | static struct max8998_platform_data aquila_max8998_pdata = { | |
379 | .num_regulators = ARRAY_SIZE(aquila_regulators), | |
380 | .regulators = aquila_regulators, | |
cb186886 MS |
381 | .buck1_set1 = S5PV210_GPH0(3), |
382 | .buck1_set2 = S5PV210_GPH0(4), | |
383 | .buck2_set3 = S5PV210_GPH0(5), | |
384 | .buck1_max_voltage1 = 1200000, | |
385 | .buck1_max_voltage2 = 1200000, | |
386 | .buck2_max_voltage = 1200000, | |
a1660c12 MS |
387 | }; |
388 | #endif | |
389 | ||
80849798 CC |
390 | static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = { |
391 | { | |
392 | .dev_name = "5-001a", | |
393 | .supply = "DBVDD", | |
394 | }, { | |
395 | .dev_name = "5-001a", | |
396 | .supply = "AVDD2", | |
397 | }, { | |
398 | .dev_name = "5-001a", | |
399 | .supply = "CPVDD", | |
400 | }, | |
401 | }; | |
402 | ||
403 | static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = { | |
404 | { | |
405 | .dev_name = "5-001a", | |
406 | .supply = "SPKVDD1", | |
407 | }, { | |
408 | .dev_name = "5-001a", | |
409 | .supply = "SPKVDD2", | |
410 | }, | |
411 | }; | |
412 | ||
413 | static struct regulator_init_data wm8994_fixed_voltage0_init_data = { | |
414 | .constraints = { | |
415 | .always_on = 1, | |
416 | }, | |
417 | .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage0_supplies), | |
418 | .consumer_supplies = wm8994_fixed_voltage0_supplies, | |
419 | }; | |
420 | ||
421 | static struct regulator_init_data wm8994_fixed_voltage1_init_data = { | |
422 | .constraints = { | |
423 | .always_on = 1, | |
424 | }, | |
425 | .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage1_supplies), | |
426 | .consumer_supplies = wm8994_fixed_voltage1_supplies, | |
427 | }; | |
428 | ||
429 | static struct fixed_voltage_config wm8994_fixed_voltage0_config = { | |
430 | .supply_name = "VCC_1.8V_PDA", | |
431 | .microvolts = 1800000, | |
432 | .gpio = -EINVAL, | |
433 | .init_data = &wm8994_fixed_voltage0_init_data, | |
434 | }; | |
435 | ||
436 | static struct fixed_voltage_config wm8994_fixed_voltage1_config = { | |
437 | .supply_name = "V_BAT", | |
438 | .microvolts = 3700000, | |
439 | .gpio = -EINVAL, | |
440 | .init_data = &wm8994_fixed_voltage1_init_data, | |
441 | }; | |
442 | ||
443 | static struct platform_device wm8994_fixed_voltage0 = { | |
444 | .name = "reg-fixed-voltage", | |
445 | .id = 0, | |
446 | .dev = { | |
447 | .platform_data = &wm8994_fixed_voltage0_config, | |
448 | }, | |
449 | }; | |
450 | ||
451 | static struct platform_device wm8994_fixed_voltage1 = { | |
452 | .name = "reg-fixed-voltage", | |
453 | .id = 1, | |
454 | .dev = { | |
455 | .platform_data = &wm8994_fixed_voltage1_config, | |
456 | }, | |
457 | }; | |
458 | ||
459 | static struct regulator_consumer_supply wm8994_avdd1_supply = { | |
460 | .dev_name = "5-001a", | |
461 | .supply = "AVDD1", | |
462 | }; | |
463 | ||
464 | static struct regulator_consumer_supply wm8994_dcvdd_supply = { | |
465 | .dev_name = "5-001a", | |
466 | .supply = "DCVDD", | |
467 | }; | |
468 | ||
469 | static struct regulator_init_data wm8994_ldo1_data = { | |
470 | .constraints = { | |
471 | .name = "AVDD1_3.0V", | |
472 | .valid_ops_mask = REGULATOR_CHANGE_STATUS, | |
473 | }, | |
474 | .num_consumer_supplies = 1, | |
475 | .consumer_supplies = &wm8994_avdd1_supply, | |
476 | }; | |
477 | ||
478 | static struct regulator_init_data wm8994_ldo2_data = { | |
479 | .constraints = { | |
480 | .name = "DCVDD_1.0V", | |
481 | }, | |
482 | .num_consumer_supplies = 1, | |
483 | .consumer_supplies = &wm8994_dcvdd_supply, | |
484 | }; | |
485 | ||
486 | static struct wm8994_pdata wm8994_platform_data = { | |
487 | /* configure gpio1 function: 0x0001(Logic level input/output) */ | |
488 | .gpio_defaults[0] = 0x0001, | |
489 | /* configure gpio3/4/5/7 function for AIF2 voice */ | |
490 | .gpio_defaults[2] = 0x8100, | |
491 | .gpio_defaults[3] = 0x8100, | |
492 | .gpio_defaults[4] = 0x8100, | |
493 | .gpio_defaults[6] = 0x0100, | |
494 | /* configure gpio8/9/10/11 function for AIF3 BT */ | |
495 | .gpio_defaults[7] = 0x8100, | |
496 | .gpio_defaults[8] = 0x0100, | |
497 | .gpio_defaults[9] = 0x0100, | |
498 | .gpio_defaults[10] = 0x0100, | |
499 | .ldo[0] = { S5PV210_MP03(6), NULL, &wm8994_ldo1_data }, /* XM0FRNB_2 */ | |
500 | .ldo[1] = { 0, NULL, &wm8994_ldo2_data }, | |
501 | }; | |
502 | ||
a1660c12 MS |
503 | /* GPIO I2C PMIC */ |
504 | #define AP_I2C_GPIO_PMIC_BUS_4 4 | |
505 | static struct i2c_gpio_platform_data aquila_i2c_gpio_pmic_data = { | |
506 | .sda_pin = S5PV210_GPJ4(0), /* XMSMCSN */ | |
507 | .scl_pin = S5PV210_GPJ4(3), /* XMSMIRQN */ | |
508 | }; | |
509 | ||
510 | static struct platform_device aquila_i2c_gpio_pmic = { | |
511 | .name = "i2c-gpio", | |
512 | .id = AP_I2C_GPIO_PMIC_BUS_4, | |
513 | .dev = { | |
514 | .platform_data = &aquila_i2c_gpio_pmic_data, | |
515 | }, | |
516 | }; | |
517 | ||
518 | static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = { | |
519 | #if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE) | |
520 | { | |
521 | /* 0xCC when SRAD = 0 */ | |
522 | I2C_BOARD_INFO("max8998", 0xCC >> 1), | |
523 | .platform_data = &aquila_max8998_pdata, | |
524 | }, | |
525 | #endif | |
526 | }; | |
527 | ||
5112267e CC |
528 | /* GPIO I2C AP 1.8V */ |
529 | #define AP_I2C_GPIO_BUS_5 5 | |
530 | static struct i2c_gpio_platform_data aquila_i2c_gpio5_data = { | |
531 | .sda_pin = S5PV210_MP05(3), /* XM0ADDR_11 */ | |
532 | .scl_pin = S5PV210_MP05(2), /* XM0ADDR_10 */ | |
533 | }; | |
534 | ||
535 | static struct platform_device aquila_i2c_gpio5 = { | |
536 | .name = "i2c-gpio", | |
537 | .id = AP_I2C_GPIO_BUS_5, | |
538 | .dev = { | |
539 | .platform_data = &aquila_i2c_gpio5_data, | |
540 | }, | |
541 | }; | |
542 | ||
543 | static struct i2c_board_info i2c_gpio5_devs[] __initdata = { | |
544 | { | |
545 | /* CS/ADDR = low 0x34 (FYI: high = 0x36) */ | |
546 | I2C_BOARD_INFO("wm8994", 0x1a), | |
80849798 | 547 | .platform_data = &wm8994_platform_data, |
5112267e CC |
548 | }, |
549 | }; | |
550 | ||
a1660c12 MS |
551 | /* PMIC Power button */ |
552 | static struct gpio_keys_button aquila_gpio_keys_table[] = { | |
553 | { | |
554 | .code = KEY_POWER, | |
555 | .gpio = S5PV210_GPH2(6), | |
556 | .desc = "gpio-keys: KEY_POWER", | |
557 | .type = EV_KEY, | |
558 | .active_low = 1, | |
559 | .wakeup = 1, | |
560 | .debounce_interval = 1, | |
561 | }, | |
562 | }; | |
563 | ||
564 | static struct gpio_keys_platform_data aquila_gpio_keys_data = { | |
565 | .buttons = aquila_gpio_keys_table, | |
566 | .nbuttons = ARRAY_SIZE(aquila_gpio_keys_table), | |
567 | }; | |
568 | ||
569 | static struct platform_device aquila_device_gpiokeys = { | |
570 | .name = "gpio-keys", | |
571 | .dev = { | |
572 | .platform_data = &aquila_gpio_keys_data, | |
573 | }, | |
574 | }; | |
575 | ||
576 | static void __init aquila_pmic_init(void) | |
577 | { | |
578 | /* AP_PMIC_IRQ: EINT7 */ | |
579 | s3c_gpio_cfgpin(S5PV210_GPH0(7), S3C_GPIO_SFN(0xf)); | |
580 | s3c_gpio_setpull(S5PV210_GPH0(7), S3C_GPIO_PULL_UP); | |
581 | ||
582 | /* nPower: EINT22 */ | |
583 | s3c_gpio_cfgpin(S5PV210_GPH2(6), S3C_GPIO_SFN(0xf)); | |
584 | s3c_gpio_setpull(S5PV210_GPH2(6), S3C_GPIO_PULL_UP); | |
585 | } | |
586 | ||
ba3fbef9 MS |
587 | /* MoviNAND */ |
588 | static struct s3c_sdhci_platdata aquila_hsmmc0_data __initdata = { | |
589 | .max_width = 4, | |
590 | .cd_type = S3C_SDHCI_CD_PERMANENT, | |
591 | }; | |
592 | ||
593 | /* Wireless LAN */ | |
594 | static struct s3c_sdhci_platdata aquila_hsmmc1_data __initdata = { | |
595 | .max_width = 4, | |
596 | .cd_type = S3C_SDHCI_CD_EXTERNAL, | |
597 | /* ext_cd_{init,cleanup} callbacks will be added later */ | |
598 | }; | |
599 | ||
600 | /* External Flash */ | |
601 | #define AQUILA_EXT_FLASH_EN S5PV210_MP05(4) | |
602 | #define AQUILA_EXT_FLASH_CD S5PV210_GPH3(4) | |
603 | static struct s3c_sdhci_platdata aquila_hsmmc2_data __initdata = { | |
604 | .max_width = 4, | |
605 | .cd_type = S3C_SDHCI_CD_GPIO, | |
606 | .ext_cd_gpio = AQUILA_EXT_FLASH_CD, | |
607 | .ext_cd_gpio_invert = 1, | |
608 | }; | |
609 | ||
610 | static void aquila_setup_sdhci(void) | |
611 | { | |
612 | gpio_request(AQUILA_EXT_FLASH_EN, "FLASH_EN"); | |
613 | gpio_direction_output(AQUILA_EXT_FLASH_EN, 1); | |
614 | ||
615 | s3c_sdhci0_set_platdata(&aquila_hsmmc0_data); | |
616 | s3c_sdhci1_set_platdata(&aquila_hsmmc1_data); | |
617 | s3c_sdhci2_set_platdata(&aquila_hsmmc2_data); | |
618 | }; | |
619 | ||
d947e792 | 620 | static struct platform_device *aquila_devices[] __initdata = { |
a1660c12 | 621 | &aquila_i2c_gpio_pmic, |
5112267e | 622 | &aquila_i2c_gpio5, |
a1660c12 | 623 | &aquila_device_gpiokeys, |
b315032f | 624 | &s3c_device_fb, |
13904fba | 625 | &s5p_device_onenand, |
ba3fbef9 MS |
626 | &s3c_device_hsmmc0, |
627 | &s3c_device_hsmmc1, | |
628 | &s3c_device_hsmmc2, | |
7200c11d SN |
629 | &s5p_device_fimc0, |
630 | &s5p_device_fimc1, | |
631 | &s5p_device_fimc2, | |
6c29e71c | 632 | &s5pv210_device_iis0, |
80849798 CC |
633 | &wm8994_fixed_voltage0, |
634 | &wm8994_fixed_voltage1, | |
d947e792 MS |
635 | }; |
636 | ||
6c29e71c CC |
637 | static void __init aquila_sound_init(void) |
638 | { | |
639 | unsigned int gpio; | |
640 | ||
641 | /* CODEC_XTAL_EN | |
642 | * | |
643 | * The Aquila board have a oscillator which provide main clock | |
644 | * to WM8994 codec. The oscillator provide 24MHz clock to WM8994 | |
645 | * clock. Set gpio setting of "CODEC_XTAL_EN" to enable a oscillator. | |
646 | * */ | |
647 | gpio = S5PV210_GPH3(2); /* XEINT_26 */ | |
648 | gpio_request(gpio, "CODEC_XTAL_EN"); | |
649 | s3c_gpio_cfgpin(gpio, S3C_GPIO_OUTPUT); | |
650 | s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); | |
651 | ||
652 | /* Ths main clock of WM8994 codec uses the output of CLKOUT pin. | |
653 | * The CLKOUT[9:8] set to 0x3(XUSBXTI) of 0xE010E000(OTHERS) | |
654 | * because it needs 24MHz clock to operate WM8994 codec. | |
655 | */ | |
656 | __raw_writel(__raw_readl(S5P_OTHERS) | (0x3 << 8), S5P_OTHERS); | |
657 | } | |
658 | ||
d947e792 MS |
659 | static void __init aquila_map_io(void) |
660 | { | |
661 | s5p_init_io(NULL, 0, S5P_VA_CHIPID); | |
662 | s3c24xx_init_clocks(24000000); | |
df01714a | 663 | s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs)); |
d947e792 MS |
664 | } |
665 | ||
666 | static void __init aquila_machine_init(void) | |
667 | { | |
a1660c12 MS |
668 | /* PMIC */ |
669 | aquila_pmic_init(); | |
670 | i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs, | |
671 | ARRAY_SIZE(i2c_gpio_pmic_devs)); | |
ba3fbef9 MS |
672 | /* SDHCI */ |
673 | aquila_setup_sdhci(); | |
a1660c12 | 674 | |
187749bb SN |
675 | s3c_fimc_setname(0, "s5p-fimc"); |
676 | s3c_fimc_setname(1, "s5p-fimc"); | |
677 | s3c_fimc_setname(2, "s5p-fimc"); | |
678 | ||
5112267e | 679 | /* SOUND */ |
6c29e71c | 680 | aquila_sound_init(); |
5112267e CC |
681 | i2c_register_board_info(AP_I2C_GPIO_BUS_5, i2c_gpio5_devs, |
682 | ARRAY_SIZE(i2c_gpio5_devs)); | |
683 | ||
b315032f MS |
684 | /* FB */ |
685 | s3c_fb_set_platdata(&aquila_lcd_pdata); | |
686 | ||
d947e792 MS |
687 | platform_add_devices(aquila_devices, ARRAY_SIZE(aquila_devices)); |
688 | } | |
689 | ||
690 | MACHINE_START(AQUILA, "Aquila") | |
691 | /* Maintainers: | |
692 | Marek Szyprowski <m.szyprowski@samsung.com> | |
693 | Kyungmin Park <kyungmin.park@samsung.com> */ | |
d947e792 MS |
694 | .boot_params = S5P_PA_SDRAM + 0x100, |
695 | .init_irq = s5pv210_init_irq, | |
696 | .map_io = aquila_map_io, | |
697 | .init_machine = aquila_machine_init, | |
698 | .timer = &s3c24xx_timer, | |
699 | MACHINE_END |