Commit | Line | Data |
---|---|---|
86e5e38c | 1 | /* |
6e23fcb3 | 2 | * Support for Compaq iPAQ H3100 and H3600 handheld computers (common code) |
86e5e38c | 3 | * |
6e23fcb3 DA |
4 | * Copyright (c) 2000,1 Compaq Computer Corporation. (Author: Jamey Hicks) |
5 | * Copyright (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru> | |
86e5e38c | 6 | * |
6e23fcb3 DA |
7 | * This program is free software; you can redistribute it and/or modify |
8 | * it under the terms of the GNU General Public License version 2 as | |
9 | * published by the Free Software Foundation. | |
86e5e38c DA |
10 | * |
11 | */ | |
6e23fcb3 | 12 | |
86e5e38c | 13 | #include <linux/kernel.h> |
4aa97555 | 14 | #include <linux/gpio.h> |
c463eb62 DA |
15 | #include <linux/gpio_keys.h> |
16 | #include <linux/input.h> | |
86e5e38c DA |
17 | #include <linux/mfd/htc-egpio.h> |
18 | #include <linux/mtd/mtd.h> | |
19 | #include <linux/mtd/partitions.h> | |
6920b5a7 | 20 | #include <linux/platform_data/sa11x0-serial.h> |
86e5e38c | 21 | #include <linux/platform_device.h> |
4aa97555 | 22 | #include <linux/serial_core.h> |
86e5e38c | 23 | |
86e5e38c | 24 | #include <asm/mach/flash.h> |
86e5e38c | 25 | #include <asm/mach/map.h> |
86e5e38c DA |
26 | |
27 | #include <mach/h3xxx.h> | |
28 | ||
29 | #include "generic.h" | |
30 | ||
86e5e38c DA |
31 | /* |
32 | * H3xxx flash support | |
33 | */ | |
34 | static struct mtd_partition h3xxx_partitions[] = { | |
35 | { | |
36 | .name = "H3XXX boot firmware", | |
37 | .size = 0x00040000, | |
38 | .offset = 0, | |
39 | .mask_flags = MTD_WRITEABLE, /* force read-only */ | |
40 | }, { | |
41 | .name = "H3XXX rootfs", | |
42 | .size = MTDPART_SIZ_FULL, | |
43 | .offset = 0x00040000, | |
44 | } | |
45 | }; | |
46 | ||
47 | static void h3xxx_set_vpp(int vpp) | |
48 | { | |
49 | gpio_set_value(H3XXX_EGPIO_VPP_ON, vpp); | |
50 | } | |
51 | ||
52 | static int h3xxx_flash_init(void) | |
53 | { | |
54 | int err = gpio_request(H3XXX_EGPIO_VPP_ON, "Flash Vpp"); | |
729fae44 DA |
55 | if (err) { |
56 | pr_err("%s: can't request H3XXX_EGPIO_VPP_ON\n", __func__); | |
86e5e38c | 57 | return err; |
729fae44 | 58 | } |
86e5e38c DA |
59 | |
60 | err = gpio_direction_output(H3XXX_EGPIO_VPP_ON, 0); | |
61 | if (err) | |
62 | gpio_free(H3XXX_EGPIO_VPP_ON); | |
63 | ||
64 | return err; | |
65 | } | |
66 | ||
67 | static void h3xxx_flash_exit(void) | |
68 | { | |
69 | gpio_free(H3XXX_EGPIO_VPP_ON); | |
70 | } | |
71 | ||
72 | static struct flash_platform_data h3xxx_flash_data = { | |
73 | .map_name = "cfi_probe", | |
74 | .set_vpp = h3xxx_set_vpp, | |
75 | .init = h3xxx_flash_init, | |
76 | .exit = h3xxx_flash_exit, | |
77 | .parts = h3xxx_partitions, | |
78 | .nr_parts = ARRAY_SIZE(h3xxx_partitions), | |
79 | }; | |
80 | ||
a181099e RK |
81 | static struct resource h3xxx_flash_resource = |
82 | DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M); | |
86e5e38c DA |
83 | |
84 | ||
85 | /* | |
86 | * H3xxx uart support | |
87 | */ | |
eb02313d DES |
88 | static struct gpio h3xxx_uart_gpio[] = { |
89 | { H3XXX_GPIO_COM_DCD, GPIOF_IN, "COM DCD" }, | |
90 | { H3XXX_GPIO_COM_CTS, GPIOF_IN, "COM CTS" }, | |
91 | { H3XXX_GPIO_COM_RTS, GPIOF_OUT_INIT_LOW, "COM RTS" }, | |
92 | }; | |
93 | ||
94 | static bool h3xxx_uart_request_gpios(void) | |
95 | { | |
96 | static bool h3xxx_uart_gpio_ok; | |
97 | int rc; | |
98 | ||
99 | if (h3xxx_uart_gpio_ok) | |
100 | return true; | |
101 | ||
102 | rc = gpio_request_array(h3xxx_uart_gpio, ARRAY_SIZE(h3xxx_uart_gpio)); | |
103 | if (rc) | |
104 | pr_err("h3xxx_uart_request_gpios: error %d\n", rc); | |
105 | else | |
106 | h3xxx_uart_gpio_ok = true; | |
107 | ||
108 | return h3xxx_uart_gpio_ok; | |
109 | } | |
110 | ||
86e5e38c DA |
111 | static void h3xxx_uart_set_mctrl(struct uart_port *port, u_int mctrl) |
112 | { | |
113 | if (port->mapbase == _Ser3UTCR0) { | |
eb02313d DES |
114 | if (!h3xxx_uart_request_gpios()) |
115 | return; | |
86e5e38c DA |
116 | gpio_set_value(H3XXX_GPIO_COM_RTS, !(mctrl & TIOCM_RTS)); |
117 | } | |
118 | } | |
119 | ||
120 | static u_int h3xxx_uart_get_mctrl(struct uart_port *port) | |
121 | { | |
122 | u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR; | |
123 | ||
124 | if (port->mapbase == _Ser3UTCR0) { | |
eb02313d DES |
125 | if (!h3xxx_uart_request_gpios()) |
126 | return ret; | |
86e5e38c DA |
127 | /* |
128 | * DCD and CTS bits are inverted in GPLR by RS232 transceiver | |
129 | */ | |
130 | if (gpio_get_value(H3XXX_GPIO_COM_DCD)) | |
131 | ret &= ~TIOCM_CD; | |
132 | if (gpio_get_value(H3XXX_GPIO_COM_CTS)) | |
133 | ret &= ~TIOCM_CTS; | |
134 | } | |
135 | ||
136 | return ret; | |
137 | } | |
138 | ||
139 | static void h3xxx_uart_pm(struct uart_port *port, u_int state, u_int oldstate) | |
140 | { | |
729fae44 | 141 | if (port->mapbase == _Ser3UTCR0) { |
86e5e38c DA |
142 | if (!gpio_request(H3XXX_EGPIO_RS232_ON, "RS232 transceiver")) { |
143 | gpio_direction_output(H3XXX_EGPIO_RS232_ON, !state); | |
144 | gpio_free(H3XXX_EGPIO_RS232_ON); | |
729fae44 DA |
145 | } else { |
146 | pr_err("%s: can't request H3XXX_EGPIO_RS232_ON\n", | |
147 | __func__); | |
86e5e38c | 148 | } |
729fae44 | 149 | } |
86e5e38c DA |
150 | } |
151 | ||
152 | /* | |
153 | * Enable/Disable wake up events for this serial port. | |
154 | * Obviously, we only support this on the normal COM port. | |
155 | */ | |
156 | static int h3xxx_uart_set_wake(struct uart_port *port, u_int enable) | |
157 | { | |
158 | int err = -EINVAL; | |
159 | ||
160 | if (port->mapbase == _Ser3UTCR0) { | |
161 | if (enable) | |
162 | PWER |= PWER_GPIO23 | PWER_GPIO25; /* DCD and CTS */ | |
163 | else | |
164 | PWER &= ~(PWER_GPIO23 | PWER_GPIO25); /* DCD and CTS */ | |
165 | err = 0; | |
166 | } | |
167 | return err; | |
168 | } | |
169 | ||
170 | static struct sa1100_port_fns h3xxx_port_fns __initdata = { | |
171 | .set_mctrl = h3xxx_uart_set_mctrl, | |
172 | .get_mctrl = h3xxx_uart_get_mctrl, | |
173 | .pm = h3xxx_uart_pm, | |
174 | .set_wake = h3xxx_uart_set_wake, | |
175 | }; | |
176 | ||
177 | /* | |
178 | * EGPIO | |
179 | */ | |
180 | ||
181 | static struct resource egpio_resources[] = { | |
a181099e | 182 | [0] = DEFINE_RES_MEM(H3600_EGPIO_PHYS, 0x4), |
86e5e38c DA |
183 | }; |
184 | ||
185 | static struct htc_egpio_chip egpio_chips[] = { | |
186 | [0] = { | |
187 | .reg_start = 0, | |
188 | .gpio_base = H3XXX_EGPIO_BASE, | |
189 | .num_gpios = 16, | |
190 | .direction = HTC_EGPIO_OUTPUT, | |
191 | .initial_values = 0x0080, /* H3XXX_EGPIO_RS232_ON */ | |
192 | }, | |
193 | }; | |
194 | ||
195 | static struct htc_egpio_platform_data egpio_info = { | |
196 | .reg_width = 16, | |
197 | .bus_width = 16, | |
198 | .chip = egpio_chips, | |
199 | .num_chips = ARRAY_SIZE(egpio_chips), | |
200 | }; | |
201 | ||
202 | static struct platform_device h3xxx_egpio = { | |
203 | .name = "htc-egpio", | |
204 | .id = -1, | |
205 | .resource = egpio_resources, | |
206 | .num_resources = ARRAY_SIZE(egpio_resources), | |
207 | .dev = { | |
208 | .platform_data = &egpio_info, | |
209 | }, | |
210 | }; | |
211 | ||
c463eb62 DA |
212 | /* |
213 | * GPIO keys | |
214 | */ | |
215 | ||
216 | static struct gpio_keys_button h3xxx_button_table[] = { | |
217 | { | |
218 | .code = KEY_POWER, | |
219 | .gpio = H3XXX_GPIO_PWR_BUTTON, | |
220 | .desc = "Power Button", | |
221 | .active_low = 1, | |
222 | .type = EV_KEY, | |
223 | .wakeup = 1, | |
224 | }, { | |
225 | .code = KEY_ENTER, | |
226 | .gpio = H3XXX_GPIO_ACTION_BUTTON, | |
227 | .active_low = 1, | |
228 | .desc = "Action button", | |
229 | .type = EV_KEY, | |
230 | .wakeup = 0, | |
231 | }, | |
232 | }; | |
233 | ||
234 | static struct gpio_keys_platform_data h3xxx_keys_data = { | |
235 | .buttons = h3xxx_button_table, | |
236 | .nbuttons = ARRAY_SIZE(h3xxx_button_table), | |
237 | }; | |
238 | ||
239 | static struct platform_device h3xxx_keys = { | |
240 | .name = "gpio-keys", | |
241 | .id = -1, | |
242 | .dev = { | |
243 | .platform_data = &h3xxx_keys_data, | |
244 | }, | |
245 | }; | |
246 | ||
86e5e38c DA |
247 | static struct platform_device *h3xxx_devices[] = { |
248 | &h3xxx_egpio, | |
c463eb62 | 249 | &h3xxx_keys, |
86e5e38c DA |
250 | }; |
251 | ||
252 | void __init h3xxx_mach_init(void) | |
253 | { | |
254 | sa1100_register_uart_fns(&h3xxx_port_fns); | |
255 | sa11x0_register_mtd(&h3xxx_flash_data, &h3xxx_flash_resource, 1); | |
256 | platform_add_devices(h3xxx_devices, ARRAY_SIZE(h3xxx_devices)); | |
257 | } | |
258 | ||
259 | static struct map_desc h3600_io_desc[] __initdata = { | |
260 | { /* static memory bank 2 CS#2 */ | |
261 | .virtual = H3600_BANK_2_VIRT, | |
262 | .pfn = __phys_to_pfn(SA1100_CS2_PHYS), | |
263 | .length = 0x02800000, | |
264 | .type = MT_DEVICE | |
265 | }, { /* static memory bank 4 CS#4 */ | |
266 | .virtual = H3600_BANK_4_VIRT, | |
267 | .pfn = __phys_to_pfn(SA1100_CS4_PHYS), | |
268 | .length = 0x00800000, | |
269 | .type = MT_DEVICE | |
270 | }, { /* EGPIO 0 CS#5 */ | |
271 | .virtual = H3600_EGPIO_VIRT, | |
272 | .pfn = __phys_to_pfn(H3600_EGPIO_PHYS), | |
273 | .length = 0x01000000, | |
274 | .type = MT_DEVICE | |
275 | } | |
276 | }; | |
277 | ||
278 | /* | |
279 | * Common map_io initialization | |
280 | */ | |
281 | ||
282 | void __init h3xxx_map_io(void) | |
283 | { | |
284 | sa1100_map_io(); | |
285 | iotable_init(h3600_io_desc, ARRAY_SIZE(h3600_io_desc)); | |
286 | ||
287 | sa1100_register_uart(0, 3); /* Common serial port */ | |
288 | // sa1100_register_uart(1, 1); /* Microcontroller on 3100/3600 */ | |
289 | ||
290 | /* Ensure those pins are outputs and driving low */ | |
291 | PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; | |
292 | PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); | |
293 | ||
294 | /* Configure suspend conditions */ | |
295 | PGSR = 0; | |
86e5e38c DA |
296 | PCFR = PCFR_OPDE; |
297 | PSDR = 0; | |
298 | ||
299 | GPCR = 0x0fffffff; /* All outputs are set low by default */ | |
300 | GPDR = 0; /* Configure all GPIOs as input */ | |
301 | } | |
302 |