Commit | Line | Data |
---|---|---|
4d22e564 KM |
1 | /* |
2 | * armadillo 800 eva board support | |
3 | * | |
4 | * Copyright (C) 2012 Renesas Solutions Corp. | |
5 | * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License as published by | |
9 | * the Free Software Foundation; version 2 of the License. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program; if not, write to the Free Software | |
18 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
19 | * | |
20 | */ | |
21 | ||
22 | #include <linux/clk.h> | |
1c96293e | 23 | #include <linux/delay.h> |
4d22e564 KM |
24 | #include <linux/err.h> |
25 | #include <linux/kernel.h> | |
f7e7d31a | 26 | #include <linux/input.h> |
cbaf7f80 | 27 | #include <linux/platform_data/st1232_pdata.h> |
1c96293e | 28 | #include <linux/irq.h> |
4d22e564 KM |
29 | #include <linux/platform_device.h> |
30 | #include <linux/gpio.h> | |
f7e7d31a | 31 | #include <linux/gpio_keys.h> |
3a5eed5f | 32 | #include <linux/regulator/driver.h> |
79f7182e | 33 | #include <linux/pinctrl/machine.h> |
d58226a2 LP |
34 | #include <linux/platform_data/pwm-renesas-tpu.h> |
35 | #include <linux/pwm_backlight.h> | |
f65ad7e3 | 36 | #include <linux/regulator/fixed.h> |
3a5eed5f | 37 | #include <linux/regulator/gpio-regulator.h> |
f65ad7e3 | 38 | #include <linux/regulator/machine.h> |
d8fed1e2 | 39 | #include <linux/sh_eth.h> |
dad29d1c | 40 | #include <linux/videodev2.h> |
1c96293e | 41 | #include <linux/usb/renesas_usbhs.h> |
49c01112 KM |
42 | #include <linux/mfd/tmio.h> |
43 | #include <linux/mmc/host.h> | |
0a4266bb | 44 | #include <linux/mmc/sh_mmcif.h> |
49c01112 | 45 | #include <linux/mmc/sh_mobile_sdhi.h> |
b22f6bb0 | 46 | #include <linux/i2c-gpio.h> |
7b6d864b | 47 | #include <linux/reboot.h> |
4d22e564 KM |
48 | #include <mach/common.h> |
49 | #include <mach/irqs.h> | |
3760e794 KM |
50 | #include <mach/r8a7740.h> |
51 | #include <media/mt9t112.h> | |
52 | #include <media/sh_mobile_ceu.h> | |
53 | #include <media/soc_camera.h> | |
4d22e564 KM |
54 | #include <asm/page.h> |
55 | #include <asm/mach-types.h> | |
56 | #include <asm/mach/arch.h> | |
57 | #include <asm/mach/map.h> | |
58 | #include <asm/mach/time.h> | |
59 | #include <asm/hardware/cache-l2x0.h> | |
dad29d1c | 60 | #include <video/sh_mobile_lcdc.h> |
910c14d0 | 61 | #include <video/sh_mobile_hdmi.h> |
5389bf71 KM |
62 | #include <sound/sh_fsi.h> |
63 | #include <sound/simple_card.h> | |
4d22e564 | 64 | |
66791859 RH |
65 | #include "sh-gpio.h" |
66 | ||
4d22e564 KM |
67 | /* |
68 | * CON1 Camera Module | |
69 | * CON2 Extension Bus | |
70 | * CON3 HDMI Output | |
71 | * CON4 Composite Video Output | |
72 | * CON5 H-UDI JTAG | |
73 | * CON6 ARM JTAG | |
74 | * CON7 SD1 | |
75 | * CON8 SD2 | |
76 | * CON9 RTC BackUp | |
77 | * CON10 Monaural Mic Input | |
78 | * CON11 Stereo Headphone Output | |
79 | * CON12 Audio Line Output(L) | |
80 | * CON13 Audio Line Output(R) | |
81 | * CON14 AWL13 Module | |
82 | * CON15 Extension | |
83 | * CON16 LCD1 | |
84 | * CON17 LCD2 | |
85 | * CON19 Power Input | |
86 | * CON20 USB1 | |
87 | * CON21 USB2 | |
88 | * CON22 Serial | |
89 | * CON23 LAN | |
90 | * CON24 USB3 | |
91 | * LED1 Camera LED(Yellow) | |
92 | * LED2 Power LED (Green) | |
93 | * ED3-LED6 User LED(Yellow) | |
94 | * LED7 LAN link LED(Green) | |
95 | * LED8 LAN activity LED(Yellow) | |
96 | */ | |
97 | ||
98 | /* | |
99 | * DipSwitch | |
100 | * | |
101 | * SW1 | |
102 | * | |
103 | * -12345678-+---------------+---------------------------- | |
104 | * 1 | boot | hermit | |
105 | * 0 | boot | OS auto boot | |
106 | * -12345678-+---------------+---------------------------- | |
107 | * 00 | boot device | eMMC | |
108 | * 10 | boot device | SDHI0 (CON7) | |
109 | * 01 | boot device | - | |
110 | * 11 | boot device | Extension Buss (CS0) | |
111 | * -12345678-+---------------+---------------------------- | |
112 | * 0 | Extension Bus | D8-D15 disable, eMMC enable | |
113 | * 1 | Extension Bus | D8-D15 enable, eMMC disable | |
114 | * -12345678-+---------------+---------------------------- | |
2e3a5ef2 | 115 | * 0 | SDHI1 | COM8 disable, COM14 enable |
4d22e564 KM |
116 | * 1 | SDHI1 | COM8 enable, COM14 disable |
117 | * -12345678-+---------------+---------------------------- | |
1c96293e KM |
118 | * 0 | USB0 | COM20 enable, COM24 disable |
119 | * 1 | USB0 | COM20 disable, COM24 enable | |
120 | * -12345678-+---------------+---------------------------- | |
4d22e564 KM |
121 | * 00 | JTAG | SH-X2 |
122 | * 10 | JTAG | ARM | |
123 | * 01 | JTAG | - | |
124 | * 11 | JTAG | Boundary Scan | |
125 | *-----------+---------------+---------------------------- | |
126 | */ | |
127 | ||
5389bf71 KM |
128 | /* |
129 | * FSI-WM8978 | |
130 | * | |
131 | * this command is required when playback. | |
132 | * | |
133 | * # amixer set "Headphone" 50 | |
1a695b3d KM |
134 | * |
135 | * this command is required when capture. | |
136 | * | |
137 | * # amixer set "Input PGA" 15 | |
138 | * # amixer set "Left Input Mixer MicP" on | |
139 | * # amixer set "Left Input Mixer MicN" on | |
140 | * # amixer set "Right Input Mixer MicN" on | |
141 | * # amixer set "Right Input Mixer MicP" on | |
5389bf71 KM |
142 | */ |
143 | ||
1c96293e KM |
144 | /* |
145 | * USB function | |
146 | * | |
147 | * When you use USB Function, | |
148 | * set SW1.6 ON, and connect cable to CN24. | |
149 | * | |
150 | * USBF needs workaround on R8A7740 chip. | |
151 | * These are a little bit complex. | |
152 | * see | |
153 | * usbhsf_power_ctrl() | |
1c96293e | 154 | */ |
0b7d7820 | 155 | #define IRQ7 irq_pin(7) |
0a4b04dc | 156 | #define USBCR1 IOMEM(0xe605810a) |
1c96293e KM |
157 | #define USBH 0xC6700000 |
158 | #define USBH_USBCTR 0x10834 | |
159 | ||
160 | struct usbhsf_private { | |
161 | struct clk *phy; | |
162 | struct clk *usb24; | |
163 | struct clk *pci; | |
164 | struct clk *func; | |
165 | struct clk *host; | |
166 | void __iomem *usbh_base; | |
167 | struct renesas_usbhs_platform_info info; | |
168 | }; | |
169 | ||
170 | #define usbhsf_get_priv(pdev) \ | |
171 | container_of(renesas_usbhs_get_info(pdev), \ | |
172 | struct usbhsf_private, info) | |
173 | ||
174 | static int usbhsf_get_id(struct platform_device *pdev) | |
175 | { | |
176 | return USBHS_GADGET; | |
177 | } | |
178 | ||
225da3e3 | 179 | static int usbhsf_power_ctrl(struct platform_device *pdev, |
1c96293e KM |
180 | void __iomem *base, int enable) |
181 | { | |
182 | struct usbhsf_private *priv = usbhsf_get_priv(pdev); | |
183 | ||
184 | /* | |
185 | * Work around for USB Function. | |
186 | * It needs USB host clock, and settings | |
187 | */ | |
188 | if (enable) { | |
189 | /* | |
190 | * enable all the related usb clocks | |
191 | * for usb workaround | |
192 | */ | |
193 | clk_enable(priv->usb24); | |
194 | clk_enable(priv->pci); | |
195 | clk_enable(priv->host); | |
196 | clk_enable(priv->func); | |
197 | clk_enable(priv->phy); | |
198 | ||
199 | /* | |
200 | * set USBCR1 | |
201 | * | |
202 | * Port1 is driven by USB function, | |
203 | * Port2 is driven by USB HOST | |
204 | * One HOST (Port1 or Port2 is HOST) | |
205 | * USB PLL input clock = 24MHz | |
206 | */ | |
207 | __raw_writew(0xd750, USBCR1); | |
208 | mdelay(1); | |
209 | ||
210 | /* | |
211 | * start USB Host | |
212 | */ | |
213 | __raw_writel(0x0000000c, priv->usbh_base + USBH_USBCTR); | |
214 | __raw_writel(0x00000008, priv->usbh_base + USBH_USBCTR); | |
215 | mdelay(10); | |
216 | ||
217 | /* | |
218 | * USB PHY Power ON | |
219 | */ | |
220 | __raw_writew(0xd770, USBCR1); | |
221 | __raw_writew(0x4000, base + 0x102); /* USBF :: SUSPMODE */ | |
222 | ||
223 | } else { | |
224 | __raw_writel(0x0000010f, priv->usbh_base + USBH_USBCTR); | |
225 | __raw_writew(0xd7c0, USBCR1); /* GPIO */ | |
226 | ||
227 | clk_disable(priv->phy); | |
228 | clk_disable(priv->func); /* usb work around */ | |
229 | clk_disable(priv->host); /* usb work around */ | |
230 | clk_disable(priv->pci); /* usb work around */ | |
231 | clk_disable(priv->usb24); /* usb work around */ | |
232 | } | |
225da3e3 KM |
233 | |
234 | return 0; | |
1c96293e KM |
235 | } |
236 | ||
d483b983 KM |
237 | static int usbhsf_get_vbus(struct platform_device *pdev) |
238 | { | |
ead10fed | 239 | return gpio_get_value(209); |
d483b983 KM |
240 | } |
241 | ||
242 | static irqreturn_t usbhsf_interrupt(int irq, void *data) | |
243 | { | |
244 | struct platform_device *pdev = data; | |
245 | ||
246 | renesas_usbhs_call_notify_hotplug(pdev); | |
247 | ||
248 | return IRQ_HANDLED; | |
249 | } | |
250 | ||
225da3e3 | 251 | static int usbhsf_hardware_exit(struct platform_device *pdev) |
1c96293e KM |
252 | { |
253 | struct usbhsf_private *priv = usbhsf_get_priv(pdev); | |
254 | ||
255 | if (!IS_ERR(priv->phy)) | |
256 | clk_put(priv->phy); | |
257 | if (!IS_ERR(priv->usb24)) | |
258 | clk_put(priv->usb24); | |
259 | if (!IS_ERR(priv->pci)) | |
260 | clk_put(priv->pci); | |
261 | if (!IS_ERR(priv->host)) | |
262 | clk_put(priv->host); | |
263 | if (!IS_ERR(priv->func)) | |
264 | clk_put(priv->func); | |
265 | if (priv->usbh_base) | |
266 | iounmap(priv->usbh_base); | |
267 | ||
268 | priv->phy = NULL; | |
269 | priv->usb24 = NULL; | |
270 | priv->pci = NULL; | |
271 | priv->host = NULL; | |
272 | priv->func = NULL; | |
273 | priv->usbh_base = NULL; | |
d483b983 KM |
274 | |
275 | free_irq(IRQ7, pdev); | |
225da3e3 KM |
276 | |
277 | return 0; | |
1c96293e KM |
278 | } |
279 | ||
280 | static int usbhsf_hardware_init(struct platform_device *pdev) | |
281 | { | |
282 | struct usbhsf_private *priv = usbhsf_get_priv(pdev); | |
d483b983 | 283 | int ret; |
1c96293e KM |
284 | |
285 | priv->phy = clk_get(&pdev->dev, "phy"); | |
286 | priv->usb24 = clk_get(&pdev->dev, "usb24"); | |
287 | priv->pci = clk_get(&pdev->dev, "pci"); | |
288 | priv->func = clk_get(&pdev->dev, "func"); | |
289 | priv->host = clk_get(&pdev->dev, "host"); | |
290 | priv->usbh_base = ioremap_nocache(USBH, 0x20000); | |
291 | ||
292 | if (IS_ERR(priv->phy) || | |
293 | IS_ERR(priv->usb24) || | |
294 | IS_ERR(priv->pci) || | |
295 | IS_ERR(priv->host) || | |
296 | IS_ERR(priv->func) || | |
297 | !priv->usbh_base) { | |
298 | dev_err(&pdev->dev, "USB clock setting failed\n"); | |
299 | usbhsf_hardware_exit(pdev); | |
300 | return -EIO; | |
301 | } | |
302 | ||
d483b983 KM |
303 | ret = request_irq(IRQ7, usbhsf_interrupt, IRQF_TRIGGER_NONE, |
304 | dev_name(&pdev->dev), pdev); | |
305 | if (ret) { | |
306 | dev_err(&pdev->dev, "request_irq err\n"); | |
307 | return ret; | |
308 | } | |
309 | irq_set_irq_type(IRQ7, IRQ_TYPE_EDGE_BOTH); | |
310 | ||
1c96293e KM |
311 | /* usb24 use 1/1 of parent clock (= usb24s = 24MHz) */ |
312 | clk_set_rate(priv->usb24, | |
313 | clk_get_rate(clk_get_parent(priv->usb24))); | |
314 | ||
315 | return 0; | |
316 | } | |
317 | ||
318 | static struct usbhsf_private usbhsf_private = { | |
319 | .info = { | |
320 | .platform_callback = { | |
321 | .get_id = usbhsf_get_id, | |
d483b983 | 322 | .get_vbus = usbhsf_get_vbus, |
1c96293e KM |
323 | .hardware_init = usbhsf_hardware_init, |
324 | .hardware_exit = usbhsf_hardware_exit, | |
325 | .power_ctrl = usbhsf_power_ctrl, | |
326 | }, | |
327 | .driver_param = { | |
328 | .buswait_bwait = 5, | |
329 | .detection_delay = 5, | |
f7e566fa KM |
330 | .d0_rx_id = SHDMA_SLAVE_USBHS_RX, |
331 | .d1_tx_id = SHDMA_SLAVE_USBHS_TX, | |
1c96293e KM |
332 | }, |
333 | } | |
334 | }; | |
335 | ||
336 | static struct resource usbhsf_resources[] = { | |
337 | { | |
338 | .name = "USBHS", | |
339 | .start = 0xe6890000, | |
340 | .end = 0xe6890104 - 1, | |
341 | .flags = IORESOURCE_MEM, | |
342 | }, | |
343 | { | |
0b7d7820 | 344 | .start = gic_spi(51), |
1c96293e KM |
345 | .flags = IORESOURCE_IRQ, |
346 | }, | |
347 | }; | |
348 | ||
349 | static struct platform_device usbhsf_device = { | |
350 | .name = "renesas_usbhs", | |
351 | .dev = { | |
352 | .platform_data = &usbhsf_private.info, | |
353 | }, | |
354 | .id = -1, | |
355 | .num_resources = ARRAY_SIZE(usbhsf_resources), | |
356 | .resource = usbhsf_resources, | |
357 | }; | |
358 | ||
d8fed1e2 KM |
359 | /* Ether */ |
360 | static struct sh_eth_plat_data sh_eth_platdata = { | |
361 | .phy = 0x00, /* LAN8710A */ | |
362 | .edmac_endian = EDMAC_LITTLE_ENDIAN, | |
d8fed1e2 KM |
363 | .phy_interface = PHY_INTERFACE_MODE_MII, |
364 | }; | |
365 | ||
366 | static struct resource sh_eth_resources[] = { | |
367 | { | |
368 | .start = 0xe9a00000, | |
369 | .end = 0xe9a00800 - 1, | |
370 | .flags = IORESOURCE_MEM, | |
371 | }, { | |
372 | .start = 0xe9a01800, | |
373 | .end = 0xe9a02000 - 1, | |
374 | .flags = IORESOURCE_MEM, | |
375 | }, { | |
0b7d7820 | 376 | .start = gic_spi(110), |
d8fed1e2 KM |
377 | .flags = IORESOURCE_IRQ, |
378 | }, | |
379 | }; | |
380 | ||
381 | static struct platform_device sh_eth_device = { | |
e5c9b4cd | 382 | .name = "r8a7740-gether", |
9c18f238 | 383 | .id = -1, |
d8fed1e2 KM |
384 | .dev = { |
385 | .platform_data = &sh_eth_platdata, | |
386 | }, | |
387 | .resource = sh_eth_resources, | |
388 | .num_resources = ARRAY_SIZE(sh_eth_resources), | |
389 | }; | |
390 | ||
d58226a2 LP |
391 | /* PWM */ |
392 | static struct resource pwm_resources[] = { | |
393 | [0] = { | |
394 | .start = 0xe6600000, | |
395 | .end = 0xe66000ff, | |
396 | .flags = IORESOURCE_MEM, | |
397 | }, | |
398 | }; | |
399 | ||
400 | static struct tpu_pwm_platform_data pwm_device_data = { | |
401 | .channels[2] = { | |
402 | .polarity = PWM_POLARITY_INVERSED, | |
403 | } | |
404 | }; | |
405 | ||
406 | static struct platform_device pwm_device = { | |
407 | .name = "renesas-tpu-pwm", | |
408 | .id = -1, | |
409 | .dev = { | |
410 | .platform_data = &pwm_device_data, | |
411 | }, | |
412 | .num_resources = ARRAY_SIZE(pwm_resources), | |
413 | .resource = pwm_resources, | |
414 | }; | |
415 | ||
416 | static struct pwm_lookup pwm_lookup[] = { | |
417 | PWM_LOOKUP("renesas-tpu-pwm", 2, "pwm-backlight.0", NULL), | |
418 | }; | |
419 | ||
420 | /* LCDC and backlight */ | |
421 | static struct platform_pwm_backlight_data pwm_backlight_data = { | |
422 | .lth_brightness = 50, | |
423 | .max_brightness = 255, | |
424 | .dft_brightness = 255, | |
425 | .pwm_period_ns = 33333, /* 30kHz */ | |
9a3beb04 | 426 | .enable_gpio = 61, |
d58226a2 LP |
427 | }; |
428 | ||
429 | static struct platform_device pwm_backlight_device = { | |
430 | .name = "pwm-backlight", | |
431 | .dev = { | |
432 | .platform_data = &pwm_backlight_data, | |
433 | }, | |
434 | }; | |
435 | ||
dad29d1c KM |
436 | static struct fb_videomode lcdc0_mode = { |
437 | .name = "AMPIER/AM-800480", | |
438 | .xres = 800, | |
439 | .yres = 480, | |
440 | .left_margin = 88, | |
441 | .right_margin = 40, | |
442 | .hsync_len = 128, | |
443 | .upper_margin = 20, | |
444 | .lower_margin = 5, | |
445 | .vsync_len = 5, | |
446 | .sync = 0, | |
447 | }; | |
448 | ||
449 | static struct sh_mobile_lcdc_info lcdc0_info = { | |
450 | .clock_source = LCDC_CLK_BUS, | |
451 | .ch[0] = { | |
452 | .chan = LCDC_CHAN_MAINLCD, | |
453 | .fourcc = V4L2_PIX_FMT_RGB565, | |
454 | .interface_type = RGB24, | |
455 | .clock_divider = 5, | |
456 | .flags = 0, | |
457 | .lcd_modes = &lcdc0_mode, | |
458 | .num_modes = 1, | |
459 | .panel_cfg = { | |
460 | .width = 111, | |
461 | .height = 68, | |
462 | }, | |
463 | }, | |
464 | }; | |
465 | ||
466 | static struct resource lcdc0_resources[] = { | |
467 | [0] = { | |
468 | .name = "LCD0", | |
469 | .start = 0xfe940000, | |
470 | .end = 0xfe943fff, | |
471 | .flags = IORESOURCE_MEM, | |
472 | }, | |
473 | [1] = { | |
0b7d7820 | 474 | .start = gic_spi(177), |
dad29d1c KM |
475 | .flags = IORESOURCE_IRQ, |
476 | }, | |
477 | }; | |
478 | ||
479 | static struct platform_device lcdc0_device = { | |
480 | .name = "sh_mobile_lcdc_fb", | |
481 | .num_resources = ARRAY_SIZE(lcdc0_resources), | |
482 | .resource = lcdc0_resources, | |
483 | .id = 0, | |
484 | .dev = { | |
485 | .platform_data = &lcdc0_info, | |
dcd740b6 | 486 | .coherent_dma_mask = DMA_BIT_MASK(32), |
dad29d1c KM |
487 | }, |
488 | }; | |
489 | ||
910c14d0 KM |
490 | /* |
491 | * LCDC1/HDMI | |
492 | */ | |
493 | static struct sh_mobile_hdmi_info hdmi_info = { | |
494 | .flags = HDMI_OUTPUT_PUSH_PULL | | |
495 | HDMI_OUTPUT_POLARITY_HI | | |
496 | HDMI_32BIT_REG | | |
497 | HDMI_HAS_HTOP1 | | |
498 | HDMI_SND_SRC_SPDIF, | |
499 | }; | |
500 | ||
501 | static struct resource hdmi_resources[] = { | |
502 | [0] = { | |
503 | .name = "HDMI", | |
504 | .start = 0xe6be0000, | |
505 | .end = 0xe6be03ff, | |
506 | .flags = IORESOURCE_MEM, | |
507 | }, | |
508 | [1] = { | |
0b7d7820 | 509 | .start = gic_spi(131), |
910c14d0 KM |
510 | .flags = IORESOURCE_IRQ, |
511 | }, | |
512 | [2] = { | |
513 | .name = "HDMI emma3pf", | |
514 | .start = 0xe6be4000, | |
515 | .end = 0xe6be43ff, | |
516 | .flags = IORESOURCE_MEM, | |
517 | }, | |
518 | }; | |
519 | ||
520 | static struct platform_device hdmi_device = { | |
521 | .name = "sh-mobile-hdmi", | |
522 | .num_resources = ARRAY_SIZE(hdmi_resources), | |
523 | .resource = hdmi_resources, | |
524 | .id = -1, | |
525 | .dev = { | |
526 | .platform_data = &hdmi_info, | |
527 | }, | |
528 | }; | |
529 | ||
530 | static const struct fb_videomode lcdc1_mode = { | |
531 | .name = "HDMI 720p", | |
532 | .xres = 1280, | |
533 | .yres = 720, | |
534 | .pixclock = 13468, | |
535 | .left_margin = 220, | |
536 | .right_margin = 110, | |
537 | .hsync_len = 40, | |
538 | .upper_margin = 20, | |
539 | .lower_margin = 5, | |
540 | .vsync_len = 5, | |
541 | .refresh = 60, | |
542 | .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, | |
543 | }; | |
544 | ||
545 | static struct sh_mobile_lcdc_info hdmi_lcdc_info = { | |
546 | .clock_source = LCDC_CLK_PERIPHERAL, /* HDMI clock */ | |
547 | .ch[0] = { | |
548 | .chan = LCDC_CHAN_MAINLCD, | |
549 | .fourcc = V4L2_PIX_FMT_RGB565, | |
550 | .interface_type = RGB24, | |
551 | .clock_divider = 1, | |
552 | .flags = LCDC_FLAGS_DWPOL, | |
553 | .lcd_modes = &lcdc1_mode, | |
554 | .num_modes = 1, | |
555 | .tx_dev = &hdmi_device, | |
556 | .panel_cfg = { | |
557 | .width = 1280, | |
558 | .height = 720, | |
559 | }, | |
560 | }, | |
561 | }; | |
562 | ||
563 | static struct resource hdmi_lcdc_resources[] = { | |
564 | [0] = { | |
565 | .name = "LCDC1", | |
566 | .start = 0xfe944000, | |
567 | .end = 0xfe948000 - 1, | |
568 | .flags = IORESOURCE_MEM, | |
569 | }, | |
570 | [1] = { | |
0b7d7820 | 571 | .start = gic_spi(178), |
910c14d0 KM |
572 | .flags = IORESOURCE_IRQ, |
573 | }, | |
574 | }; | |
575 | ||
576 | static struct platform_device hdmi_lcdc_device = { | |
577 | .name = "sh_mobile_lcdc_fb", | |
578 | .num_resources = ARRAY_SIZE(hdmi_lcdc_resources), | |
579 | .resource = hdmi_lcdc_resources, | |
580 | .id = 1, | |
581 | .dev = { | |
582 | .platform_data = &hdmi_lcdc_info, | |
dcd740b6 | 583 | .coherent_dma_mask = DMA_BIT_MASK(32), |
910c14d0 KM |
584 | }, |
585 | }; | |
586 | ||
f7e7d31a | 587 | /* GPIO KEY */ |
5c1d2d16 LP |
588 | #define GPIO_KEY(c, g, d, ...) \ |
589 | { .code = c, .gpio = g, .desc = d, .active_low = 1, __VA_ARGS__ } | |
f7e7d31a KM |
590 | |
591 | static struct gpio_keys_button gpio_buttons[] = { | |
ead10fed LP |
592 | GPIO_KEY(KEY_POWER, 99, "SW3", .wakeup = 1), |
593 | GPIO_KEY(KEY_BACK, 100, "SW4"), | |
594 | GPIO_KEY(KEY_MENU, 97, "SW5"), | |
595 | GPIO_KEY(KEY_HOME, 98, "SW6"), | |
f7e7d31a KM |
596 | }; |
597 | ||
598 | static struct gpio_keys_platform_data gpio_key_info = { | |
599 | .buttons = gpio_buttons, | |
600 | .nbuttons = ARRAY_SIZE(gpio_buttons), | |
601 | }; | |
602 | ||
603 | static struct platform_device gpio_keys_device = { | |
604 | .name = "gpio-keys", | |
605 | .id = -1, | |
606 | .dev = { | |
607 | .platform_data = &gpio_key_info, | |
608 | }, | |
609 | }; | |
610 | ||
3a5eed5f GL |
611 | /* Fixed 3.3V regulator to be used by SDHI1, MMCIF */ |
612 | static struct regulator_consumer_supply fixed3v3_power_consumers[] = { | |
f65ad7e3 GL |
613 | REGULATOR_SUPPLY("vmmc", "sh_mmcif"), |
614 | REGULATOR_SUPPLY("vqmmc", "sh_mmcif"), | |
615 | }; | |
616 | ||
9fb444f2 LP |
617 | /* Fixed 3.3V regulator used by LCD backlight */ |
618 | static struct regulator_consumer_supply fixed5v0_power_consumers[] = { | |
619 | REGULATOR_SUPPLY("power", "pwm-backlight.0"), | |
620 | }; | |
621 | ||
3a5eed5f GL |
622 | /* Fixed 3.3V regulator to be used by SDHI0 */ |
623 | static struct regulator_consumer_supply vcc_sdhi0_consumers[] = { | |
f65ad7e3 | 624 | REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), |
3a5eed5f GL |
625 | }; |
626 | ||
627 | static struct regulator_init_data vcc_sdhi0_init_data = { | |
628 | .constraints = { | |
629 | .valid_ops_mask = REGULATOR_CHANGE_STATUS, | |
630 | }, | |
631 | .num_consumer_supplies = ARRAY_SIZE(vcc_sdhi0_consumers), | |
632 | .consumer_supplies = vcc_sdhi0_consumers, | |
633 | }; | |
634 | ||
635 | static struct fixed_voltage_config vcc_sdhi0_info = { | |
636 | .supply_name = "SDHI0 Vcc", | |
637 | .microvolts = 3300000, | |
f5c02edc | 638 | .gpio = 75, |
3a5eed5f GL |
639 | .enable_high = 1, |
640 | .init_data = &vcc_sdhi0_init_data, | |
641 | }; | |
642 | ||
643 | static struct platform_device vcc_sdhi0 = { | |
644 | .name = "reg-fixed-voltage", | |
645 | .id = 1, | |
646 | .dev = { | |
647 | .platform_data = &vcc_sdhi0_info, | |
648 | }, | |
649 | }; | |
650 | ||
651 | /* 1.8 / 3.3V SDHI0 VccQ regulator */ | |
652 | static struct regulator_consumer_supply vccq_sdhi0_consumers[] = { | |
f65ad7e3 | 653 | REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), |
3a5eed5f GL |
654 | }; |
655 | ||
656 | static struct regulator_init_data vccq_sdhi0_init_data = { | |
657 | .constraints = { | |
658 | .input_uV = 3300000, | |
659 | .min_uV = 1800000, | |
660 | .max_uV = 3300000, | |
661 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | | |
662 | REGULATOR_CHANGE_STATUS, | |
663 | }, | |
664 | .num_consumer_supplies = ARRAY_SIZE(vccq_sdhi0_consumers), | |
665 | .consumer_supplies = vccq_sdhi0_consumers, | |
666 | }; | |
667 | ||
668 | static struct gpio vccq_sdhi0_gpios[] = { | |
f5c02edc | 669 | {17, GPIOF_OUT_INIT_LOW, "vccq-sdhi0" }, |
3a5eed5f GL |
670 | }; |
671 | ||
672 | static struct gpio_regulator_state vccq_sdhi0_states[] = { | |
673 | { .value = 3300000, .gpios = (0 << 0) }, | |
674 | { .value = 1800000, .gpios = (1 << 0) }, | |
675 | }; | |
676 | ||
677 | static struct gpio_regulator_config vccq_sdhi0_info = { | |
678 | .supply_name = "vqmmc", | |
679 | ||
f5c02edc | 680 | .enable_gpio = 74, |
3a5eed5f GL |
681 | .enable_high = 1, |
682 | .enabled_at_boot = 0, | |
683 | ||
684 | .gpios = vccq_sdhi0_gpios, | |
685 | .nr_gpios = ARRAY_SIZE(vccq_sdhi0_gpios), | |
686 | ||
687 | .states = vccq_sdhi0_states, | |
688 | .nr_states = ARRAY_SIZE(vccq_sdhi0_states), | |
689 | ||
690 | .type = REGULATOR_VOLTAGE, | |
691 | .init_data = &vccq_sdhi0_init_data, | |
692 | }; | |
693 | ||
694 | static struct platform_device vccq_sdhi0 = { | |
695 | .name = "gpio-regulator", | |
696 | .id = -1, | |
697 | .dev = { | |
698 | .platform_data = &vccq_sdhi0_info, | |
699 | }, | |
700 | }; | |
701 | ||
a9060f89 GL |
702 | /* Fixed 3.3V regulator to be used by SDHI1 */ |
703 | static struct regulator_consumer_supply vcc_sdhi1_consumers[] = { | |
f65ad7e3 | 704 | REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), |
a9060f89 GL |
705 | }; |
706 | ||
707 | static struct regulator_init_data vcc_sdhi1_init_data = { | |
708 | .constraints = { | |
709 | .valid_ops_mask = REGULATOR_CHANGE_STATUS, | |
710 | }, | |
711 | .num_consumer_supplies = ARRAY_SIZE(vcc_sdhi1_consumers), | |
712 | .consumer_supplies = vcc_sdhi1_consumers, | |
713 | }; | |
714 | ||
715 | static struct fixed_voltage_config vcc_sdhi1_info = { | |
716 | .supply_name = "SDHI1 Vcc", | |
717 | .microvolts = 3300000, | |
f5c02edc | 718 | .gpio = 16, |
a9060f89 GL |
719 | .enable_high = 1, |
720 | .init_data = &vcc_sdhi1_init_data, | |
721 | }; | |
722 | ||
723 | static struct platform_device vcc_sdhi1 = { | |
724 | .name = "reg-fixed-voltage", | |
725 | .id = 2, | |
726 | .dev = { | |
727 | .platform_data = &vcc_sdhi1_info, | |
728 | }, | |
f65ad7e3 GL |
729 | }; |
730 | ||
49c01112 | 731 | /* SDHI0 */ |
49c01112 | 732 | static struct sh_mobile_sdhi_info sdhi0_info = { |
95798e35 KM |
733 | .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, |
734 | .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, | |
a9060f89 GL |
735 | .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | |
736 | MMC_CAP_POWER_OFF_CARD, | |
aee14423 | 737 | .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, |
f5c02edc | 738 | .cd_gpio = 167, |
49c01112 KM |
739 | }; |
740 | ||
741 | static struct resource sdhi0_resources[] = { | |
742 | { | |
743 | .name = "SDHI0", | |
744 | .start = 0xe6850000, | |
745 | .end = 0xe6850100 - 1, | |
746 | .flags = IORESOURCE_MEM, | |
747 | }, | |
748 | /* | |
749 | * no SH_MOBILE_SDHI_IRQ_CARD_DETECT here | |
750 | */ | |
751 | { | |
752 | .name = SH_MOBILE_SDHI_IRQ_SDCARD, | |
0b7d7820 | 753 | .start = gic_spi(118), |
49c01112 KM |
754 | .flags = IORESOURCE_IRQ, |
755 | }, | |
756 | { | |
757 | .name = SH_MOBILE_SDHI_IRQ_SDIO, | |
0b7d7820 | 758 | .start = gic_spi(119), |
49c01112 KM |
759 | .flags = IORESOURCE_IRQ, |
760 | }, | |
761 | }; | |
762 | ||
763 | static struct platform_device sdhi0_device = { | |
764 | .name = "sh_mobile_sdhi", | |
765 | .id = 0, | |
766 | .dev = { | |
767 | .platform_data = &sdhi0_info, | |
768 | }, | |
769 | .num_resources = ARRAY_SIZE(sdhi0_resources), | |
770 | .resource = sdhi0_resources, | |
771 | }; | |
772 | ||
2e3a5ef2 KM |
773 | /* SDHI1 */ |
774 | static struct sh_mobile_sdhi_info sdhi1_info = { | |
95798e35 KM |
775 | .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, |
776 | .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, | |
a9060f89 GL |
777 | .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | |
778 | MMC_CAP_POWER_OFF_CARD, | |
aee14423 GL |
779 | .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, |
780 | /* Port72 cannot generate IRQs, will be used in polling mode. */ | |
f5c02edc | 781 | .cd_gpio = 72, |
2e3a5ef2 KM |
782 | }; |
783 | ||
784 | static struct resource sdhi1_resources[] = { | |
785 | [0] = { | |
786 | .name = "SDHI1", | |
787 | .start = 0xe6860000, | |
788 | .end = 0xe6860100 - 1, | |
789 | .flags = IORESOURCE_MEM, | |
790 | }, | |
791 | [1] = { | |
0b7d7820 | 792 | .start = gic_spi(121), |
2e3a5ef2 KM |
793 | .flags = IORESOURCE_IRQ, |
794 | }, | |
795 | [2] = { | |
0b7d7820 | 796 | .start = gic_spi(122), |
2e3a5ef2 KM |
797 | .flags = IORESOURCE_IRQ, |
798 | }, | |
799 | [3] = { | |
0b7d7820 | 800 | .start = gic_spi(123), |
2e3a5ef2 KM |
801 | .flags = IORESOURCE_IRQ, |
802 | }, | |
803 | }; | |
804 | ||
805 | static struct platform_device sdhi1_device = { | |
806 | .name = "sh_mobile_sdhi", | |
807 | .id = 1, | |
808 | .dev = { | |
809 | .platform_data = &sdhi1_info, | |
810 | }, | |
811 | .num_resources = ARRAY_SIZE(sdhi1_resources), | |
812 | .resource = sdhi1_resources, | |
813 | }; | |
814 | ||
c9e3a32f LP |
815 | static const struct pinctrl_map eva_sdhi1_pinctrl_map[] = { |
816 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740", | |
817 | "sdhi1_data4", "sdhi1"), | |
818 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740", | |
819 | "sdhi1_ctrl", "sdhi1"), | |
820 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740", | |
821 | "sdhi1_cd", "sdhi1"), | |
822 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740", | |
823 | "sdhi1_wp", "sdhi1"), | |
824 | }; | |
825 | ||
0a4266bb KM |
826 | /* MMCIF */ |
827 | static struct sh_mmcif_plat_data sh_mmcif_plat = { | |
828 | .sup_pclk = 0, | |
0a4266bb KM |
829 | .caps = MMC_CAP_4_BIT_DATA | |
830 | MMC_CAP_8_BIT_DATA | | |
831 | MMC_CAP_NONREMOVABLE, | |
fbf3264c | 832 | .ccs_unsupported = true, |
87284208 GL |
833 | .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, |
834 | .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, | |
0a4266bb KM |
835 | }; |
836 | ||
837 | static struct resource sh_mmcif_resources[] = { | |
838 | [0] = { | |
839 | .name = "MMCIF", | |
840 | .start = 0xe6bd0000, | |
841 | .end = 0xe6bd0100 - 1, | |
842 | .flags = IORESOURCE_MEM, | |
843 | }, | |
844 | [1] = { | |
845 | /* MMC ERR */ | |
0b7d7820 | 846 | .start = gic_spi(56), |
0a4266bb KM |
847 | .flags = IORESOURCE_IRQ, |
848 | }, | |
849 | [2] = { | |
850 | /* MMC NOR */ | |
0b7d7820 | 851 | .start = gic_spi(57), |
0a4266bb KM |
852 | .flags = IORESOURCE_IRQ, |
853 | }, | |
854 | }; | |
855 | ||
856 | static struct platform_device sh_mmcif_device = { | |
857 | .name = "sh_mmcif", | |
858 | .id = -1, | |
859 | .dev = { | |
860 | .platform_data = &sh_mmcif_plat, | |
861 | }, | |
862 | .num_resources = ARRAY_SIZE(sh_mmcif_resources), | |
863 | .resource = sh_mmcif_resources, | |
864 | }; | |
865 | ||
3760e794 KM |
866 | /* Camera */ |
867 | static int mt9t111_power(struct device *dev, int mode) | |
868 | { | |
869 | struct clk *mclk = clk_get(NULL, "video1"); | |
870 | ||
871 | if (IS_ERR(mclk)) { | |
872 | dev_err(dev, "can't get video1 clock\n"); | |
873 | return -EINVAL; | |
874 | } | |
875 | ||
876 | if (mode) { | |
877 | /* video1 (= CON1 camera) expect 24MHz */ | |
878 | clk_set_rate(mclk, clk_round_rate(mclk, 24000000)); | |
879 | clk_enable(mclk); | |
ead10fed | 880 | gpio_set_value(158, 1); |
3760e794 | 881 | } else { |
ead10fed | 882 | gpio_set_value(158, 0); |
3760e794 KM |
883 | clk_disable(mclk); |
884 | } | |
885 | ||
886 | clk_put(mclk); | |
887 | ||
888 | return 0; | |
889 | } | |
890 | ||
891 | static struct i2c_board_info i2c_camera_mt9t111 = { | |
892 | I2C_BOARD_INFO("mt9t112", 0x3d), | |
893 | }; | |
894 | ||
895 | static struct mt9t112_camera_info mt9t111_info = { | |
896 | .divider = { 16, 0, 0, 7, 0, 10, 14, 7, 7 }, | |
897 | }; | |
898 | ||
899 | static struct soc_camera_link mt9t111_link = { | |
900 | .i2c_adapter_id = 0, | |
901 | .bus_id = 0, | |
902 | .board_info = &i2c_camera_mt9t111, | |
903 | .power = mt9t111_power, | |
904 | .priv = &mt9t111_info, | |
905 | }; | |
906 | ||
907 | static struct platform_device camera_device = { | |
908 | .name = "soc-camera-pdrv", | |
909 | .id = 0, | |
910 | .dev = { | |
911 | .platform_data = &mt9t111_link, | |
912 | }, | |
913 | }; | |
914 | ||
915 | /* CEU0 */ | |
916 | static struct sh_mobile_ceu_info sh_mobile_ceu0_info = { | |
917 | .flags = SH_CEU_FLAG_LOWER_8BIT, | |
918 | }; | |
919 | ||
920 | static struct resource ceu0_resources[] = { | |
921 | [0] = { | |
922 | .name = "CEU", | |
923 | .start = 0xfe910000, | |
924 | .end = 0xfe91009f, | |
925 | .flags = IORESOURCE_MEM, | |
926 | }, | |
927 | [1] = { | |
0b7d7820 | 928 | .start = gic_spi(160), |
3760e794 KM |
929 | .flags = IORESOURCE_IRQ, |
930 | }, | |
931 | [2] = { | |
932 | /* place holder for contiguous memory */ | |
933 | }, | |
934 | }; | |
935 | ||
936 | static struct platform_device ceu0_device = { | |
937 | .name = "sh_mobile_ceu", | |
938 | .id = 0, | |
939 | .num_resources = ARRAY_SIZE(ceu0_resources), | |
940 | .resource = ceu0_resources, | |
941 | .dev = { | |
942 | .platform_data = &sh_mobile_ceu0_info, | |
943 | .coherent_dma_mask = 0xffffffff, | |
944 | }, | |
945 | }; | |
946 | ||
5389bf71 KM |
947 | /* FSI */ |
948 | static struct sh_fsi_platform_info fsi_info = { | |
949 | /* FSI-WM8978 */ | |
950 | .port_a = { | |
dc7dd584 | 951 | .tx_id = SHDMA_SLAVE_FSIA_TX, |
5389bf71 | 952 | }, |
0676c05e KM |
953 | /* FSI-HDMI */ |
954 | .port_b = { | |
955 | .flags = SH_FSI_FMT_SPDIF | | |
13e35b40 KM |
956 | SH_FSI_ENABLE_STREAM_MODE | |
957 | SH_FSI_CLK_CPG, | |
dc7dd584 | 958 | .tx_id = SHDMA_SLAVE_FSIB_TX, |
0676c05e | 959 | } |
5389bf71 KM |
960 | }; |
961 | ||
962 | static struct resource fsi_resources[] = { | |
963 | [0] = { | |
964 | .name = "FSI", | |
965 | .start = 0xfe1f0000, | |
4a4783a3 | 966 | .end = 0xfe1f0400 - 1, |
5389bf71 KM |
967 | .flags = IORESOURCE_MEM, |
968 | }, | |
969 | [1] = { | |
0b7d7820 | 970 | .start = gic_spi(9), |
5389bf71 KM |
971 | .flags = IORESOURCE_IRQ, |
972 | }, | |
973 | }; | |
974 | ||
975 | static struct platform_device fsi_device = { | |
976 | .name = "sh_fsi2", | |
977 | .id = -1, | |
978 | .num_resources = ARRAY_SIZE(fsi_resources), | |
979 | .resource = fsi_resources, | |
980 | .dev = { | |
981 | .platform_data = &fsi_info, | |
982 | }, | |
983 | }; | |
984 | ||
985 | /* FSI-WM8978 */ | |
5389bf71 KM |
986 | static struct asoc_simple_card_info fsi_wm8978_info = { |
987 | .name = "wm8978", | |
988 | .card = "FSI2A-WM8978", | |
5389bf71 KM |
989 | .codec = "wm8978.0-001a", |
990 | .platform = "sh_fsi2", | |
a4a2992c KM |
991 | .daifmt = SND_SOC_DAIFMT_I2S, |
992 | .cpu_dai = { | |
993 | .name = "fsia-dai", | |
994 | .fmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_IB_NF, | |
995 | }, | |
996 | .codec_dai = { | |
997 | .name = "wm8978-hifi", | |
998 | .fmt = SND_SOC_DAIFMT_CBM_CFM | SND_SOC_DAIFMT_NB_NF, | |
999 | .sysclk = 12288000, | |
1000 | }, | |
5389bf71 KM |
1001 | }; |
1002 | ||
1003 | static struct platform_device fsi_wm8978_device = { | |
1004 | .name = "asoc-simple-card", | |
1005 | .id = 0, | |
1006 | .dev = { | |
1007 | .platform_data = &fsi_wm8978_info, | |
1008 | }, | |
1009 | }; | |
1010 | ||
0676c05e | 1011 | /* FSI-HDMI */ |
0676c05e KM |
1012 | static struct asoc_simple_card_info fsi2_hdmi_info = { |
1013 | .name = "HDMI", | |
1014 | .card = "FSI2B-HDMI", | |
0676c05e KM |
1015 | .codec = "sh-mobile-hdmi", |
1016 | .platform = "sh_fsi2", | |
a4a2992c KM |
1017 | .cpu_dai = { |
1018 | .name = "fsib-dai", | |
1019 | .fmt = SND_SOC_DAIFMT_CBM_CFM, | |
1020 | }, | |
1021 | .codec_dai = { | |
1022 | .name = "sh_mobile_hdmi-hifi", | |
1023 | }, | |
0676c05e KM |
1024 | }; |
1025 | ||
1026 | static struct platform_device fsi_hdmi_device = { | |
1027 | .name = "asoc-simple-card", | |
1028 | .id = 1, | |
1029 | .dev = { | |
1030 | .platform_data = &fsi2_hdmi_info, | |
1031 | }, | |
1032 | }; | |
1033 | ||
b22f6bb0 NI |
1034 | /* RTC: RTC connects i2c-gpio. */ |
1035 | static struct i2c_gpio_platform_data i2c_gpio_data = { | |
ead10fed LP |
1036 | .sda_pin = 208, |
1037 | .scl_pin = 91, | |
b22f6bb0 NI |
1038 | .udelay = 5, /* 100 kHz */ |
1039 | }; | |
1040 | ||
1041 | static struct platform_device i2c_gpio_device = { | |
1042 | .name = "i2c-gpio", | |
1043 | .id = 2, | |
1044 | .dev = { | |
1045 | .platform_data = &i2c_gpio_data, | |
1046 | }, | |
1047 | }; | |
1048 | ||
46cf6687 | 1049 | /* I2C */ |
cbaf7f80 BH |
1050 | static struct st1232_pdata st1232_i2c0_pdata = { |
1051 | .reset_gpio = 166, | |
1052 | }; | |
1053 | ||
46cf6687 KM |
1054 | static struct i2c_board_info i2c0_devices[] = { |
1055 | { | |
1056 | I2C_BOARD_INFO("st1232-ts", 0x55), | |
0b7d7820 | 1057 | .irq = irq_pin(10), |
cbaf7f80 | 1058 | .platform_data = &st1232_i2c0_pdata, |
46cf6687 | 1059 | }, |
5389bf71 KM |
1060 | { |
1061 | I2C_BOARD_INFO("wm8978", 0x1a), | |
1062 | }, | |
46cf6687 KM |
1063 | }; |
1064 | ||
b22f6bb0 NI |
1065 | static struct i2c_board_info i2c2_devices[] = { |
1066 | { | |
1067 | I2C_BOARD_INFO("s35390a", 0x30), | |
1068 | .type = "s35390a", | |
1069 | }, | |
1070 | }; | |
1071 | ||
4d22e564 KM |
1072 | /* |
1073 | * board devices | |
1074 | */ | |
1075 | static struct platform_device *eva_devices[] __initdata = { | |
dad29d1c | 1076 | &lcdc0_device, |
d58226a2 LP |
1077 | &pwm_device, |
1078 | &pwm_backlight_device, | |
f7e7d31a | 1079 | &gpio_keys_device, |
d8fed1e2 | 1080 | &sh_eth_device, |
a9060f89 GL |
1081 | &vcc_sdhi0, |
1082 | &vccq_sdhi0, | |
49c01112 | 1083 | &sdhi0_device, |
0a4266bb | 1084 | &sh_mmcif_device, |
910c14d0 KM |
1085 | &hdmi_device, |
1086 | &hdmi_lcdc_device, | |
3760e794 KM |
1087 | &camera_device, |
1088 | &ceu0_device, | |
5389bf71 KM |
1089 | &fsi_device, |
1090 | &fsi_wm8978_device, | |
ee3c843d | 1091 | &fsi_hdmi_device, |
b22f6bb0 | 1092 | &i2c_gpio_device, |
4d22e564 KM |
1093 | }; |
1094 | ||
79f7182e | 1095 | static const struct pinctrl_map eva_pinctrl_map[] = { |
babde827 LP |
1096 | /* CEU0 */ |
1097 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740", | |
1098 | "ceu0_data_0_7", "ceu0"), | |
1099 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740", | |
1100 | "ceu0_clk_0", "ceu0"), | |
1101 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740", | |
1102 | "ceu0_sync", "ceu0"), | |
1103 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740", | |
1104 | "ceu0_field", "ceu0"), | |
fed8976e LP |
1105 | /* FSIA */ |
1106 | PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740", | |
1107 | "fsia_sclk_in", "fsia"), | |
1108 | PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740", | |
1109 | "fsia_mclk_out", "fsia"), | |
1110 | PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740", | |
1111 | "fsia_data_in_1", "fsia"), | |
1112 | PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740", | |
1113 | "fsia_data_out_0", "fsia"), | |
1114 | /* FSIB */ | |
1115 | PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-r8a7740", | |
1116 | "fsib_mclk_in", "fsib"), | |
613285ce | 1117 | /* GETHER */ |
7cd402b3 | 1118 | PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740", |
613285ce | 1119 | "gether_mii", "gether"), |
7cd402b3 | 1120 | PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740", |
613285ce | 1121 | "gether_int", "gether"), |
f1bb4ab0 LP |
1122 | /* HDMI */ |
1123 | PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-r8a7740", | |
1124 | "hdmi", "hdmi"), | |
79f7182e LP |
1125 | /* LCD0 */ |
1126 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740", | |
1127 | "lcd0_data24_0", "lcd0"), | |
1128 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740", | |
1129 | "lcd0_lclk_1", "lcd0"), | |
1130 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740", | |
1131 | "lcd0_sync", "lcd0"), | |
c9e3a32f LP |
1132 | /* MMCIF */ |
1133 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a7740", | |
1134 | "mmc0_data8_1", "mmc0"), | |
1135 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a7740", | |
1136 | "mmc0_ctrl_1", "mmc0"), | |
7cdfb46e BH |
1137 | /* SCIFA1 */ |
1138 | PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.1", "pfc-r8a7740", | |
1139 | "scifa1_data", "scifa1"), | |
c9e3a32f LP |
1140 | /* SDHI0 */ |
1141 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740", | |
1142 | "sdhi0_data4", "sdhi0"), | |
1143 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740", | |
1144 | "sdhi0_ctrl", "sdhi0"), | |
1145 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740", | |
1146 | "sdhi0_wp", "sdhi0"), | |
89ae7b5b LP |
1147 | /* ST1232 */ |
1148 | PIN_MAP_MUX_GROUP_DEFAULT("0-0055", "pfc-r8a7740", | |
1149 | "intc_irq10", "intc"), | |
d58226a2 LP |
1150 | /* TPU0 */ |
1151 | PIN_MAP_MUX_GROUP_DEFAULT("renesas-tpu-pwm", "pfc-r8a7740", | |
1152 | "tpu0_to2_1", "tpu0"), | |
89ae7b5b LP |
1153 | /* USBHS */ |
1154 | PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-r8a7740", | |
1155 | "intc_irq7_1", "intc"), | |
79f7182e LP |
1156 | }; |
1157 | ||
1c96293e KM |
1158 | static void __init eva_clock_init(void) |
1159 | { | |
1160 | struct clk *system = clk_get(NULL, "system_clk"); | |
1161 | struct clk *xtal1 = clk_get(NULL, "extal1"); | |
1162 | struct clk *usb24s = clk_get(NULL, "usb24s"); | |
0676c05e | 1163 | struct clk *fsibck = clk_get(NULL, "fsibck"); |
1c96293e KM |
1164 | |
1165 | if (IS_ERR(system) || | |
1166 | IS_ERR(xtal1) || | |
0676c05e | 1167 | IS_ERR(usb24s) || |
13e35b40 | 1168 | IS_ERR(fsibck)) { |
1c96293e KM |
1169 | pr_err("armadillo800eva board clock init failed\n"); |
1170 | goto clock_error; | |
1171 | } | |
1172 | ||
1173 | /* armadillo 800 eva extal1 is 24MHz */ | |
1174 | clk_set_rate(xtal1, 24000000); | |
1175 | ||
1176 | /* usb24s use extal1 (= system) clock (= 24MHz) */ | |
1177 | clk_set_parent(usb24s, system); | |
1178 | ||
0676c05e | 1179 | /* FSIBCK is 12.288MHz, and it is parent of FSI-B */ |
0676c05e | 1180 | clk_set_rate(fsibck, 12288000); |
0676c05e | 1181 | |
1c96293e KM |
1182 | clock_error: |
1183 | if (!IS_ERR(system)) | |
1184 | clk_put(system); | |
1185 | if (!IS_ERR(xtal1)) | |
1186 | clk_put(xtal1); | |
1187 | if (!IS_ERR(usb24s)) | |
1188 | clk_put(usb24s); | |
0676c05e KM |
1189 | if (!IS_ERR(fsibck)) |
1190 | clk_put(fsibck); | |
1c96293e KM |
1191 | } |
1192 | ||
4d22e564 KM |
1193 | /* |
1194 | * board init | |
1195 | */ | |
0a4b04dc AB |
1196 | #define GPIO_PORT7CR IOMEM(0xe6050007) |
1197 | #define GPIO_PORT8CR IOMEM(0xe6050008) | |
4d22e564 KM |
1198 | static void __init eva_init(void) |
1199 | { | |
0f54788d KM |
1200 | struct platform_device *usb = NULL; |
1201 | ||
f65ad7e3 GL |
1202 | regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, |
1203 | ARRAY_SIZE(fixed3v3_power_consumers), 3300000); | |
9fb444f2 LP |
1204 | regulator_register_always_on(3, "fixed-5.0V", fixed5v0_power_consumers, |
1205 | ARRAY_SIZE(fixed5v0_power_consumers), 5000000); | |
1c96293e | 1206 | |
79f7182e | 1207 | pinctrl_register_mappings(eva_pinctrl_map, ARRAY_SIZE(eva_pinctrl_map)); |
d58226a2 | 1208 | pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup)); |
79f7182e | 1209 | |
4d22e564 | 1210 | r8a7740_pinmux_init(); |
d49679e5 | 1211 | r8a7740_meram_workaround(); |
4d22e564 | 1212 | |
d8fed1e2 | 1213 | /* GETHER */ |
ead10fed | 1214 | gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */ |
d8fed1e2 | 1215 | |
1c96293e | 1216 | /* USB */ |
ead10fed | 1217 | gpio_request_one(159, GPIOF_IN, NULL); /* USB_DEVICE_MODE */ |
1c96293e | 1218 | |
ead10fed | 1219 | if (gpio_get_value(159)) { |
1c96293e KM |
1220 | /* USB Host */ |
1221 | } else { | |
1222 | /* USB Func */ | |
d483b983 | 1223 | /* |
89ae7b5b LP |
1224 | * The USBHS interrupt handlers needs to read the IRQ pin value |
1225 | * (HI/LOW) to diffentiate USB connection and disconnection | |
1226 | * events (usbhsf_get_vbus()). We thus need to select both the | |
1227 | * intc_irq7_1 pin group and GPIO 209 here. | |
d483b983 | 1228 | */ |
ead10fed | 1229 | gpio_request_one(209, GPIOF_IN, NULL); |
d483b983 | 1230 | |
1c96293e | 1231 | platform_device_register(&usbhsf_device); |
0f54788d | 1232 | usb = &usbhsf_device; |
1c96293e KM |
1233 | } |
1234 | ||
3760e794 | 1235 | /* CON1/CON15 Camera */ |
ead10fed LP |
1236 | gpio_request_one(173, GPIOF_OUT_INIT_LOW, NULL); /* STANDBY */ |
1237 | gpio_request_one(172, GPIOF_OUT_INIT_HIGH, NULL); /* RST */ | |
0f69e708 | 1238 | /* see mt9t111_power() */ |
ead10fed | 1239 | gpio_request_one(158, GPIOF_OUT_INIT_LOW, NULL); /* CAM_PON */ |
3760e794 | 1240 | |
5389bf71 | 1241 | /* FSI-WM8978 */ |
ead10fed LP |
1242 | gpio_request(7, NULL); |
1243 | gpio_request(8, NULL); | |
a01366b4 KM |
1244 | gpio_direction_none(GPIO_PORT7CR); /* FSIAOBT needs no direction */ |
1245 | gpio_direction_none(GPIO_PORT8CR); /* FSIAOLR needs no direction */ | |
5389bf71 | 1246 | |
dad29d1c KM |
1247 | /* |
1248 | * CAUTION | |
1249 | * | |
1250 | * DBGMD/LCDC0/FSIA MUX | |
1251 | * DBGMD_SELECT_B should be set after setting PFC Function. | |
1252 | */ | |
ead10fed | 1253 | gpio_request_one(176, GPIOF_OUT_INIT_HIGH, NULL); |
dad29d1c | 1254 | |
2e3a5ef2 KM |
1255 | /* |
1256 | * We can switch CON8/CON14 by SW1.5, | |
1257 | * but it needs after DBGMD_SELECT_B | |
1258 | */ | |
ead10fed LP |
1259 | gpio_request_one(6, GPIOF_IN, NULL); |
1260 | if (gpio_get_value(6)) { | |
2e3a5ef2 KM |
1261 | /* CON14 enable */ |
1262 | } else { | |
1263 | /* CON8 (SDHI1) enable */ | |
c9e3a32f LP |
1264 | pinctrl_register_mappings(eva_sdhi1_pinctrl_map, |
1265 | ARRAY_SIZE(eva_sdhi1_pinctrl_map)); | |
2e3a5ef2 | 1266 | |
a9060f89 | 1267 | platform_device_register(&vcc_sdhi1); |
2e3a5ef2 KM |
1268 | platform_device_register(&sdhi1_device); |
1269 | } | |
1270 | ||
1271 | ||
4d22e564 KM |
1272 | #ifdef CONFIG_CACHE_L2X0 |
1273 | /* Early BRESP enable, Shared attribute override enable, 32K*8way */ | |
bc8b2428 | 1274 | l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff); |
4d22e564 KM |
1275 | #endif |
1276 | ||
46cf6687 | 1277 | i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices)); |
b22f6bb0 | 1278 | i2c_register_board_info(2, i2c2_devices, ARRAY_SIZE(i2c2_devices)); |
46cf6687 | 1279 | |
4d22e564 KM |
1280 | r8a7740_add_standard_devices(); |
1281 | ||
1282 | platform_add_devices(eva_devices, | |
1283 | ARRAY_SIZE(eva_devices)); | |
0676c05e | 1284 | |
8bdd9468 RW |
1285 | rmobile_add_device_to_domain("A4LC", &lcdc0_device); |
1286 | rmobile_add_device_to_domain("A4LC", &hdmi_lcdc_device); | |
0f54788d | 1287 | if (usb) |
8bdd9468 | 1288 | rmobile_add_device_to_domain("A3SP", usb); |
895d3b53 BH |
1289 | |
1290 | r8a7740_pm_init(); | |
4d22e564 KM |
1291 | } |
1292 | ||
1293 | static void __init eva_earlytimer_init(void) | |
1294 | { | |
4d22e564 | 1295 | r8a7740_clock_init(MD_CK0 | MD_CK2); |
4d22e564 | 1296 | shmobile_earlytimer_init(); |
2f27c406 HE |
1297 | |
1298 | /* the rate of extal1 clock must be set before late_time_init */ | |
1299 | eva_clock_init(); | |
4d22e564 KM |
1300 | } |
1301 | ||
1302 | static void __init eva_add_early_devices(void) | |
1303 | { | |
1304 | r8a7740_add_early_devices(); | |
4d22e564 KM |
1305 | } |
1306 | ||
1efdf563 | 1307 | #define RESCNT2 IOMEM(0xe6188020) |
7b6d864b | 1308 | static void eva_restart(enum reboot_mode mode, const char *cmd) |
1efdf563 KM |
1309 | { |
1310 | /* Do soft power on reset */ | |
1311 | writel((1 << 31), RESCNT2); | |
1312 | } | |
1313 | ||
e6bf7059 MD |
1314 | static const char *eva_boards_compat_dt[] __initdata = { |
1315 | "renesas,armadillo800eva", | |
1316 | NULL, | |
1317 | }; | |
1318 | ||
1319 | DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva") | |
4d22e564 KM |
1320 | .map_io = r8a7740_map_io, |
1321 | .init_early = eva_add_early_devices, | |
15645581 | 1322 | .init_irq = r8a7740_init_irq_of, |
4d22e564 | 1323 | .init_machine = eva_init, |
37f971b6 | 1324 | .init_late = shmobile_init_late, |
6bb27d73 | 1325 | .init_time = eva_earlytimer_init, |
e6bf7059 | 1326 | .dt_compat = eva_boards_compat_dt, |
1efdf563 | 1327 | .restart = eva_restart, |
4d22e564 | 1328 | MACHINE_END |