Commit | Line | Data |
---|---|---|
4d22e564 KM |
1 | /* |
2 | * armadillo 800 eva board support | |
3 | * | |
4 | * Copyright (C) 2012 Renesas Solutions Corp. | |
5 | * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License as published by | |
9 | * the Free Software Foundation; version 2 of the License. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program; if not, write to the Free Software | |
18 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
19 | * | |
20 | */ | |
21 | ||
22 | #include <linux/clk.h> | |
1c96293e | 23 | #include <linux/delay.h> |
4d22e564 KM |
24 | #include <linux/err.h> |
25 | #include <linux/kernel.h> | |
f7e7d31a | 26 | #include <linux/input.h> |
cbaf7f80 | 27 | #include <linux/platform_data/st1232_pdata.h> |
1c96293e | 28 | #include <linux/irq.h> |
4d22e564 KM |
29 | #include <linux/platform_device.h> |
30 | #include <linux/gpio.h> | |
f7e7d31a | 31 | #include <linux/gpio_keys.h> |
3a5eed5f | 32 | #include <linux/regulator/driver.h> |
79f7182e | 33 | #include <linux/pinctrl/machine.h> |
b16001d7 | 34 | #include <linux/pwm.h> |
d58226a2 | 35 | #include <linux/pwm_backlight.h> |
f65ad7e3 | 36 | #include <linux/regulator/fixed.h> |
3a5eed5f | 37 | #include <linux/regulator/gpio-regulator.h> |
f65ad7e3 | 38 | #include <linux/regulator/machine.h> |
d8fed1e2 | 39 | #include <linux/sh_eth.h> |
dad29d1c | 40 | #include <linux/videodev2.h> |
1c96293e | 41 | #include <linux/usb/renesas_usbhs.h> |
49c01112 KM |
42 | #include <linux/mfd/tmio.h> |
43 | #include <linux/mmc/host.h> | |
0a4266bb | 44 | #include <linux/mmc/sh_mmcif.h> |
49c01112 | 45 | #include <linux/mmc/sh_mobile_sdhi.h> |
b22f6bb0 | 46 | #include <linux/i2c-gpio.h> |
7b6d864b | 47 | #include <linux/reboot.h> |
9e38b84b | 48 | |
3760e794 KM |
49 | #include <media/mt9t112.h> |
50 | #include <media/sh_mobile_ceu.h> | |
51 | #include <media/soc_camera.h> | |
4d22e564 KM |
52 | #include <asm/page.h> |
53 | #include <asm/mach-types.h> | |
54 | #include <asm/mach/arch.h> | |
55 | #include <asm/mach/map.h> | |
56 | #include <asm/mach/time.h> | |
57 | #include <asm/hardware/cache-l2x0.h> | |
dad29d1c | 58 | #include <video/sh_mobile_lcdc.h> |
910c14d0 | 59 | #include <video/sh_mobile_hdmi.h> |
5389bf71 KM |
60 | #include <sound/sh_fsi.h> |
61 | #include <sound/simple_card.h> | |
4d22e564 | 62 | |
fd44aa5e | 63 | #include "common.h" |
b6bab126 | 64 | #include "irqs.h" |
6b8b0cb4 | 65 | #include "pm-rmobile.h" |
9e38b84b | 66 | #include "r8a7740.h" |
66791859 RH |
67 | #include "sh-gpio.h" |
68 | ||
4d22e564 KM |
69 | /* |
70 | * CON1 Camera Module | |
71 | * CON2 Extension Bus | |
72 | * CON3 HDMI Output | |
73 | * CON4 Composite Video Output | |
74 | * CON5 H-UDI JTAG | |
75 | * CON6 ARM JTAG | |
76 | * CON7 SD1 | |
77 | * CON8 SD2 | |
78 | * CON9 RTC BackUp | |
79 | * CON10 Monaural Mic Input | |
80 | * CON11 Stereo Headphone Output | |
81 | * CON12 Audio Line Output(L) | |
82 | * CON13 Audio Line Output(R) | |
83 | * CON14 AWL13 Module | |
84 | * CON15 Extension | |
85 | * CON16 LCD1 | |
86 | * CON17 LCD2 | |
87 | * CON19 Power Input | |
88 | * CON20 USB1 | |
89 | * CON21 USB2 | |
90 | * CON22 Serial | |
91 | * CON23 LAN | |
92 | * CON24 USB3 | |
93 | * LED1 Camera LED(Yellow) | |
94 | * LED2 Power LED (Green) | |
95 | * ED3-LED6 User LED(Yellow) | |
96 | * LED7 LAN link LED(Green) | |
97 | * LED8 LAN activity LED(Yellow) | |
98 | */ | |
99 | ||
100 | /* | |
101 | * DipSwitch | |
102 | * | |
103 | * SW1 | |
104 | * | |
105 | * -12345678-+---------------+---------------------------- | |
106 | * 1 | boot | hermit | |
107 | * 0 | boot | OS auto boot | |
108 | * -12345678-+---------------+---------------------------- | |
109 | * 00 | boot device | eMMC | |
110 | * 10 | boot device | SDHI0 (CON7) | |
111 | * 01 | boot device | - | |
112 | * 11 | boot device | Extension Buss (CS0) | |
113 | * -12345678-+---------------+---------------------------- | |
114 | * 0 | Extension Bus | D8-D15 disable, eMMC enable | |
115 | * 1 | Extension Bus | D8-D15 enable, eMMC disable | |
116 | * -12345678-+---------------+---------------------------- | |
2e3a5ef2 | 117 | * 0 | SDHI1 | COM8 disable, COM14 enable |
4d22e564 KM |
118 | * 1 | SDHI1 | COM8 enable, COM14 disable |
119 | * -12345678-+---------------+---------------------------- | |
1c96293e KM |
120 | * 0 | USB0 | COM20 enable, COM24 disable |
121 | * 1 | USB0 | COM20 disable, COM24 enable | |
122 | * -12345678-+---------------+---------------------------- | |
4d22e564 KM |
123 | * 00 | JTAG | SH-X2 |
124 | * 10 | JTAG | ARM | |
125 | * 01 | JTAG | - | |
126 | * 11 | JTAG | Boundary Scan | |
127 | *-----------+---------------+---------------------------- | |
128 | */ | |
129 | ||
5389bf71 KM |
130 | /* |
131 | * FSI-WM8978 | |
132 | * | |
133 | * this command is required when playback. | |
134 | * | |
135 | * # amixer set "Headphone" 50 | |
1a695b3d KM |
136 | * |
137 | * this command is required when capture. | |
138 | * | |
139 | * # amixer set "Input PGA" 15 | |
140 | * # amixer set "Left Input Mixer MicP" on | |
141 | * # amixer set "Left Input Mixer MicN" on | |
142 | * # amixer set "Right Input Mixer MicN" on | |
143 | * # amixer set "Right Input Mixer MicP" on | |
5389bf71 KM |
144 | */ |
145 | ||
1c96293e KM |
146 | /* |
147 | * USB function | |
148 | * | |
149 | * When you use USB Function, | |
150 | * set SW1.6 ON, and connect cable to CN24. | |
151 | * | |
152 | * USBF needs workaround on R8A7740 chip. | |
153 | * These are a little bit complex. | |
154 | * see | |
155 | * usbhsf_power_ctrl() | |
1c96293e | 156 | */ |
0b7d7820 | 157 | #define IRQ7 irq_pin(7) |
0a4b04dc | 158 | #define USBCR1 IOMEM(0xe605810a) |
1c96293e KM |
159 | #define USBH 0xC6700000 |
160 | #define USBH_USBCTR 0x10834 | |
161 | ||
162 | struct usbhsf_private { | |
163 | struct clk *phy; | |
164 | struct clk *usb24; | |
165 | struct clk *pci; | |
166 | struct clk *func; | |
167 | struct clk *host; | |
168 | void __iomem *usbh_base; | |
169 | struct renesas_usbhs_platform_info info; | |
170 | }; | |
171 | ||
172 | #define usbhsf_get_priv(pdev) \ | |
173 | container_of(renesas_usbhs_get_info(pdev), \ | |
174 | struct usbhsf_private, info) | |
175 | ||
176 | static int usbhsf_get_id(struct platform_device *pdev) | |
177 | { | |
178 | return USBHS_GADGET; | |
179 | } | |
180 | ||
225da3e3 | 181 | static int usbhsf_power_ctrl(struct platform_device *pdev, |
1c96293e KM |
182 | void __iomem *base, int enable) |
183 | { | |
184 | struct usbhsf_private *priv = usbhsf_get_priv(pdev); | |
185 | ||
186 | /* | |
187 | * Work around for USB Function. | |
188 | * It needs USB host clock, and settings | |
189 | */ | |
190 | if (enable) { | |
191 | /* | |
192 | * enable all the related usb clocks | |
193 | * for usb workaround | |
194 | */ | |
195 | clk_enable(priv->usb24); | |
196 | clk_enable(priv->pci); | |
197 | clk_enable(priv->host); | |
198 | clk_enable(priv->func); | |
199 | clk_enable(priv->phy); | |
200 | ||
201 | /* | |
202 | * set USBCR1 | |
203 | * | |
204 | * Port1 is driven by USB function, | |
205 | * Port2 is driven by USB HOST | |
206 | * One HOST (Port1 or Port2 is HOST) | |
207 | * USB PLL input clock = 24MHz | |
208 | */ | |
209 | __raw_writew(0xd750, USBCR1); | |
210 | mdelay(1); | |
211 | ||
212 | /* | |
213 | * start USB Host | |
214 | */ | |
215 | __raw_writel(0x0000000c, priv->usbh_base + USBH_USBCTR); | |
216 | __raw_writel(0x00000008, priv->usbh_base + USBH_USBCTR); | |
217 | mdelay(10); | |
218 | ||
219 | /* | |
220 | * USB PHY Power ON | |
221 | */ | |
222 | __raw_writew(0xd770, USBCR1); | |
223 | __raw_writew(0x4000, base + 0x102); /* USBF :: SUSPMODE */ | |
224 | ||
225 | } else { | |
226 | __raw_writel(0x0000010f, priv->usbh_base + USBH_USBCTR); | |
227 | __raw_writew(0xd7c0, USBCR1); /* GPIO */ | |
228 | ||
229 | clk_disable(priv->phy); | |
230 | clk_disable(priv->func); /* usb work around */ | |
231 | clk_disable(priv->host); /* usb work around */ | |
232 | clk_disable(priv->pci); /* usb work around */ | |
233 | clk_disable(priv->usb24); /* usb work around */ | |
234 | } | |
225da3e3 KM |
235 | |
236 | return 0; | |
1c96293e KM |
237 | } |
238 | ||
d483b983 KM |
239 | static int usbhsf_get_vbus(struct platform_device *pdev) |
240 | { | |
ead10fed | 241 | return gpio_get_value(209); |
d483b983 KM |
242 | } |
243 | ||
244 | static irqreturn_t usbhsf_interrupt(int irq, void *data) | |
245 | { | |
246 | struct platform_device *pdev = data; | |
247 | ||
248 | renesas_usbhs_call_notify_hotplug(pdev); | |
249 | ||
250 | return IRQ_HANDLED; | |
251 | } | |
252 | ||
225da3e3 | 253 | static int usbhsf_hardware_exit(struct platform_device *pdev) |
1c96293e KM |
254 | { |
255 | struct usbhsf_private *priv = usbhsf_get_priv(pdev); | |
256 | ||
257 | if (!IS_ERR(priv->phy)) | |
258 | clk_put(priv->phy); | |
259 | if (!IS_ERR(priv->usb24)) | |
260 | clk_put(priv->usb24); | |
261 | if (!IS_ERR(priv->pci)) | |
262 | clk_put(priv->pci); | |
263 | if (!IS_ERR(priv->host)) | |
264 | clk_put(priv->host); | |
265 | if (!IS_ERR(priv->func)) | |
266 | clk_put(priv->func); | |
267 | if (priv->usbh_base) | |
268 | iounmap(priv->usbh_base); | |
269 | ||
270 | priv->phy = NULL; | |
271 | priv->usb24 = NULL; | |
272 | priv->pci = NULL; | |
273 | priv->host = NULL; | |
274 | priv->func = NULL; | |
275 | priv->usbh_base = NULL; | |
d483b983 KM |
276 | |
277 | free_irq(IRQ7, pdev); | |
225da3e3 KM |
278 | |
279 | return 0; | |
1c96293e KM |
280 | } |
281 | ||
282 | static int usbhsf_hardware_init(struct platform_device *pdev) | |
283 | { | |
284 | struct usbhsf_private *priv = usbhsf_get_priv(pdev); | |
d483b983 | 285 | int ret; |
1c96293e KM |
286 | |
287 | priv->phy = clk_get(&pdev->dev, "phy"); | |
288 | priv->usb24 = clk_get(&pdev->dev, "usb24"); | |
289 | priv->pci = clk_get(&pdev->dev, "pci"); | |
290 | priv->func = clk_get(&pdev->dev, "func"); | |
291 | priv->host = clk_get(&pdev->dev, "host"); | |
292 | priv->usbh_base = ioremap_nocache(USBH, 0x20000); | |
293 | ||
294 | if (IS_ERR(priv->phy) || | |
295 | IS_ERR(priv->usb24) || | |
296 | IS_ERR(priv->pci) || | |
297 | IS_ERR(priv->host) || | |
298 | IS_ERR(priv->func) || | |
299 | !priv->usbh_base) { | |
300 | dev_err(&pdev->dev, "USB clock setting failed\n"); | |
301 | usbhsf_hardware_exit(pdev); | |
302 | return -EIO; | |
303 | } | |
304 | ||
d483b983 KM |
305 | ret = request_irq(IRQ7, usbhsf_interrupt, IRQF_TRIGGER_NONE, |
306 | dev_name(&pdev->dev), pdev); | |
307 | if (ret) { | |
308 | dev_err(&pdev->dev, "request_irq err\n"); | |
309 | return ret; | |
310 | } | |
311 | irq_set_irq_type(IRQ7, IRQ_TYPE_EDGE_BOTH); | |
312 | ||
1c96293e KM |
313 | /* usb24 use 1/1 of parent clock (= usb24s = 24MHz) */ |
314 | clk_set_rate(priv->usb24, | |
315 | clk_get_rate(clk_get_parent(priv->usb24))); | |
316 | ||
317 | return 0; | |
318 | } | |
319 | ||
320 | static struct usbhsf_private usbhsf_private = { | |
321 | .info = { | |
322 | .platform_callback = { | |
323 | .get_id = usbhsf_get_id, | |
d483b983 | 324 | .get_vbus = usbhsf_get_vbus, |
1c96293e KM |
325 | .hardware_init = usbhsf_hardware_init, |
326 | .hardware_exit = usbhsf_hardware_exit, | |
327 | .power_ctrl = usbhsf_power_ctrl, | |
328 | }, | |
329 | .driver_param = { | |
330 | .buswait_bwait = 5, | |
331 | .detection_delay = 5, | |
f7e566fa KM |
332 | .d0_rx_id = SHDMA_SLAVE_USBHS_RX, |
333 | .d1_tx_id = SHDMA_SLAVE_USBHS_TX, | |
1c96293e KM |
334 | }, |
335 | } | |
336 | }; | |
337 | ||
338 | static struct resource usbhsf_resources[] = { | |
339 | { | |
340 | .name = "USBHS", | |
341 | .start = 0xe6890000, | |
342 | .end = 0xe6890104 - 1, | |
343 | .flags = IORESOURCE_MEM, | |
344 | }, | |
345 | { | |
0b7d7820 | 346 | .start = gic_spi(51), |
1c96293e KM |
347 | .flags = IORESOURCE_IRQ, |
348 | }, | |
349 | }; | |
350 | ||
351 | static struct platform_device usbhsf_device = { | |
352 | .name = "renesas_usbhs", | |
353 | .dev = { | |
354 | .platform_data = &usbhsf_private.info, | |
355 | }, | |
356 | .id = -1, | |
357 | .num_resources = ARRAY_SIZE(usbhsf_resources), | |
358 | .resource = usbhsf_resources, | |
359 | }; | |
360 | ||
d8fed1e2 KM |
361 | /* Ether */ |
362 | static struct sh_eth_plat_data sh_eth_platdata = { | |
363 | .phy = 0x00, /* LAN8710A */ | |
364 | .edmac_endian = EDMAC_LITTLE_ENDIAN, | |
d8fed1e2 KM |
365 | .phy_interface = PHY_INTERFACE_MODE_MII, |
366 | }; | |
367 | ||
368 | static struct resource sh_eth_resources[] = { | |
369 | { | |
370 | .start = 0xe9a00000, | |
371 | .end = 0xe9a00800 - 1, | |
372 | .flags = IORESOURCE_MEM, | |
373 | }, { | |
374 | .start = 0xe9a01800, | |
375 | .end = 0xe9a02000 - 1, | |
376 | .flags = IORESOURCE_MEM, | |
377 | }, { | |
0b7d7820 | 378 | .start = gic_spi(110), |
d8fed1e2 KM |
379 | .flags = IORESOURCE_IRQ, |
380 | }, | |
381 | }; | |
382 | ||
383 | static struct platform_device sh_eth_device = { | |
e5c9b4cd | 384 | .name = "r8a7740-gether", |
9c18f238 | 385 | .id = -1, |
d8fed1e2 KM |
386 | .dev = { |
387 | .platform_data = &sh_eth_platdata, | |
78060840 SS |
388 | .dma_mask = &sh_eth_device.dev.coherent_dma_mask, |
389 | .coherent_dma_mask = DMA_BIT_MASK(32), | |
d8fed1e2 KM |
390 | }, |
391 | .resource = sh_eth_resources, | |
392 | .num_resources = ARRAY_SIZE(sh_eth_resources), | |
393 | }; | |
394 | ||
d58226a2 LP |
395 | /* PWM */ |
396 | static struct resource pwm_resources[] = { | |
397 | [0] = { | |
398 | .start = 0xe6600000, | |
399 | .end = 0xe66000ff, | |
400 | .flags = IORESOURCE_MEM, | |
401 | }, | |
402 | }; | |
403 | ||
d58226a2 LP |
404 | static struct platform_device pwm_device = { |
405 | .name = "renesas-tpu-pwm", | |
406 | .id = -1, | |
d58226a2 LP |
407 | .num_resources = ARRAY_SIZE(pwm_resources), |
408 | .resource = pwm_resources, | |
409 | }; | |
410 | ||
411 | static struct pwm_lookup pwm_lookup[] = { | |
48d6f146 AB |
412 | PWM_LOOKUP("renesas-tpu-pwm", 2, "pwm-backlight.0", NULL, |
413 | 33333, PWM_POLARITY_INVERSED), | |
d58226a2 LP |
414 | }; |
415 | ||
416 | /* LCDC and backlight */ | |
417 | static struct platform_pwm_backlight_data pwm_backlight_data = { | |
418 | .lth_brightness = 50, | |
419 | .max_brightness = 255, | |
420 | .dft_brightness = 255, | |
421 | .pwm_period_ns = 33333, /* 30kHz */ | |
9a3beb04 | 422 | .enable_gpio = 61, |
d58226a2 LP |
423 | }; |
424 | ||
425 | static struct platform_device pwm_backlight_device = { | |
426 | .name = "pwm-backlight", | |
427 | .dev = { | |
428 | .platform_data = &pwm_backlight_data, | |
429 | }, | |
430 | }; | |
431 | ||
dad29d1c KM |
432 | static struct fb_videomode lcdc0_mode = { |
433 | .name = "AMPIER/AM-800480", | |
434 | .xres = 800, | |
435 | .yres = 480, | |
436 | .left_margin = 88, | |
437 | .right_margin = 40, | |
438 | .hsync_len = 128, | |
439 | .upper_margin = 20, | |
440 | .lower_margin = 5, | |
441 | .vsync_len = 5, | |
442 | .sync = 0, | |
443 | }; | |
444 | ||
445 | static struct sh_mobile_lcdc_info lcdc0_info = { | |
446 | .clock_source = LCDC_CLK_BUS, | |
447 | .ch[0] = { | |
448 | .chan = LCDC_CHAN_MAINLCD, | |
449 | .fourcc = V4L2_PIX_FMT_RGB565, | |
450 | .interface_type = RGB24, | |
451 | .clock_divider = 5, | |
452 | .flags = 0, | |
453 | .lcd_modes = &lcdc0_mode, | |
454 | .num_modes = 1, | |
455 | .panel_cfg = { | |
456 | .width = 111, | |
457 | .height = 68, | |
458 | }, | |
459 | }, | |
460 | }; | |
461 | ||
462 | static struct resource lcdc0_resources[] = { | |
463 | [0] = { | |
464 | .name = "LCD0", | |
465 | .start = 0xfe940000, | |
466 | .end = 0xfe943fff, | |
467 | .flags = IORESOURCE_MEM, | |
468 | }, | |
469 | [1] = { | |
0b7d7820 | 470 | .start = gic_spi(177), |
dad29d1c KM |
471 | .flags = IORESOURCE_IRQ, |
472 | }, | |
473 | }; | |
474 | ||
475 | static struct platform_device lcdc0_device = { | |
476 | .name = "sh_mobile_lcdc_fb", | |
477 | .num_resources = ARRAY_SIZE(lcdc0_resources), | |
478 | .resource = lcdc0_resources, | |
479 | .id = 0, | |
480 | .dev = { | |
481 | .platform_data = &lcdc0_info, | |
dcd740b6 | 482 | .coherent_dma_mask = DMA_BIT_MASK(32), |
dad29d1c KM |
483 | }, |
484 | }; | |
485 | ||
910c14d0 KM |
486 | /* |
487 | * LCDC1/HDMI | |
488 | */ | |
489 | static struct sh_mobile_hdmi_info hdmi_info = { | |
490 | .flags = HDMI_OUTPUT_PUSH_PULL | | |
491 | HDMI_OUTPUT_POLARITY_HI | | |
492 | HDMI_32BIT_REG | | |
493 | HDMI_HAS_HTOP1 | | |
494 | HDMI_SND_SRC_SPDIF, | |
495 | }; | |
496 | ||
497 | static struct resource hdmi_resources[] = { | |
498 | [0] = { | |
499 | .name = "HDMI", | |
500 | .start = 0xe6be0000, | |
501 | .end = 0xe6be03ff, | |
502 | .flags = IORESOURCE_MEM, | |
503 | }, | |
504 | [1] = { | |
0b7d7820 | 505 | .start = gic_spi(131), |
910c14d0 KM |
506 | .flags = IORESOURCE_IRQ, |
507 | }, | |
508 | [2] = { | |
509 | .name = "HDMI emma3pf", | |
510 | .start = 0xe6be4000, | |
511 | .end = 0xe6be43ff, | |
512 | .flags = IORESOURCE_MEM, | |
513 | }, | |
514 | }; | |
515 | ||
516 | static struct platform_device hdmi_device = { | |
517 | .name = "sh-mobile-hdmi", | |
518 | .num_resources = ARRAY_SIZE(hdmi_resources), | |
519 | .resource = hdmi_resources, | |
520 | .id = -1, | |
521 | .dev = { | |
522 | .platform_data = &hdmi_info, | |
523 | }, | |
524 | }; | |
525 | ||
526 | static const struct fb_videomode lcdc1_mode = { | |
527 | .name = "HDMI 720p", | |
528 | .xres = 1280, | |
529 | .yres = 720, | |
530 | .pixclock = 13468, | |
531 | .left_margin = 220, | |
532 | .right_margin = 110, | |
533 | .hsync_len = 40, | |
534 | .upper_margin = 20, | |
535 | .lower_margin = 5, | |
536 | .vsync_len = 5, | |
537 | .refresh = 60, | |
538 | .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, | |
539 | }; | |
540 | ||
541 | static struct sh_mobile_lcdc_info hdmi_lcdc_info = { | |
542 | .clock_source = LCDC_CLK_PERIPHERAL, /* HDMI clock */ | |
543 | .ch[0] = { | |
544 | .chan = LCDC_CHAN_MAINLCD, | |
545 | .fourcc = V4L2_PIX_FMT_RGB565, | |
546 | .interface_type = RGB24, | |
547 | .clock_divider = 1, | |
548 | .flags = LCDC_FLAGS_DWPOL, | |
549 | .lcd_modes = &lcdc1_mode, | |
550 | .num_modes = 1, | |
551 | .tx_dev = &hdmi_device, | |
552 | .panel_cfg = { | |
553 | .width = 1280, | |
554 | .height = 720, | |
555 | }, | |
556 | }, | |
557 | }; | |
558 | ||
559 | static struct resource hdmi_lcdc_resources[] = { | |
560 | [0] = { | |
561 | .name = "LCDC1", | |
562 | .start = 0xfe944000, | |
563 | .end = 0xfe948000 - 1, | |
564 | .flags = IORESOURCE_MEM, | |
565 | }, | |
566 | [1] = { | |
0b7d7820 | 567 | .start = gic_spi(178), |
910c14d0 KM |
568 | .flags = IORESOURCE_IRQ, |
569 | }, | |
570 | }; | |
571 | ||
572 | static struct platform_device hdmi_lcdc_device = { | |
573 | .name = "sh_mobile_lcdc_fb", | |
574 | .num_resources = ARRAY_SIZE(hdmi_lcdc_resources), | |
575 | .resource = hdmi_lcdc_resources, | |
576 | .id = 1, | |
577 | .dev = { | |
578 | .platform_data = &hdmi_lcdc_info, | |
dcd740b6 | 579 | .coherent_dma_mask = DMA_BIT_MASK(32), |
910c14d0 KM |
580 | }, |
581 | }; | |
582 | ||
111bcc13 GU |
583 | /* LEDS */ |
584 | static struct gpio_led gpio_leds[] = { | |
585 | { | |
586 | .name = "LED3", | |
587 | .gpio = 102, | |
588 | .default_state = LEDS_GPIO_DEFSTATE_ON, | |
589 | }, { | |
590 | .name = "LED4", | |
591 | .gpio = 111, | |
592 | .default_state = LEDS_GPIO_DEFSTATE_ON, | |
593 | }, { | |
594 | .name = "LED5", | |
595 | .gpio = 110, | |
596 | .default_state = LEDS_GPIO_DEFSTATE_ON, | |
597 | }, { | |
598 | .name = "LED6", | |
599 | .gpio = 177, | |
600 | .default_state = LEDS_GPIO_DEFSTATE_ON, | |
601 | }, | |
602 | }; | |
603 | ||
604 | static struct gpio_led_platform_data leds_gpio_info = { | |
605 | .leds = gpio_leds, | |
606 | .num_leds = ARRAY_SIZE(gpio_leds), | |
607 | }; | |
608 | ||
609 | static struct platform_device leds_gpio_device = { | |
610 | .name = "leds-gpio", | |
611 | .id = -1, | |
612 | .dev = { | |
613 | .platform_data = &leds_gpio_info, | |
614 | }, | |
615 | }; | |
616 | ||
f7e7d31a | 617 | /* GPIO KEY */ |
5c1d2d16 LP |
618 | #define GPIO_KEY(c, g, d, ...) \ |
619 | { .code = c, .gpio = g, .desc = d, .active_low = 1, __VA_ARGS__ } | |
f7e7d31a KM |
620 | |
621 | static struct gpio_keys_button gpio_buttons[] = { | |
ead10fed LP |
622 | GPIO_KEY(KEY_POWER, 99, "SW3", .wakeup = 1), |
623 | GPIO_KEY(KEY_BACK, 100, "SW4"), | |
624 | GPIO_KEY(KEY_MENU, 97, "SW5"), | |
625 | GPIO_KEY(KEY_HOME, 98, "SW6"), | |
f7e7d31a KM |
626 | }; |
627 | ||
628 | static struct gpio_keys_platform_data gpio_key_info = { | |
629 | .buttons = gpio_buttons, | |
630 | .nbuttons = ARRAY_SIZE(gpio_buttons), | |
631 | }; | |
632 | ||
633 | static struct platform_device gpio_keys_device = { | |
634 | .name = "gpio-keys", | |
635 | .id = -1, | |
636 | .dev = { | |
637 | .platform_data = &gpio_key_info, | |
638 | }, | |
639 | }; | |
640 | ||
3a5eed5f GL |
641 | /* Fixed 3.3V regulator to be used by SDHI1, MMCIF */ |
642 | static struct regulator_consumer_supply fixed3v3_power_consumers[] = { | |
f65ad7e3 GL |
643 | REGULATOR_SUPPLY("vmmc", "sh_mmcif"), |
644 | REGULATOR_SUPPLY("vqmmc", "sh_mmcif"), | |
645 | }; | |
646 | ||
9fb444f2 LP |
647 | /* Fixed 3.3V regulator used by LCD backlight */ |
648 | static struct regulator_consumer_supply fixed5v0_power_consumers[] = { | |
649 | REGULATOR_SUPPLY("power", "pwm-backlight.0"), | |
650 | }; | |
651 | ||
3a5eed5f GL |
652 | /* Fixed 3.3V regulator to be used by SDHI0 */ |
653 | static struct regulator_consumer_supply vcc_sdhi0_consumers[] = { | |
f65ad7e3 | 654 | REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), |
3a5eed5f GL |
655 | }; |
656 | ||
657 | static struct regulator_init_data vcc_sdhi0_init_data = { | |
658 | .constraints = { | |
659 | .valid_ops_mask = REGULATOR_CHANGE_STATUS, | |
660 | }, | |
661 | .num_consumer_supplies = ARRAY_SIZE(vcc_sdhi0_consumers), | |
662 | .consumer_supplies = vcc_sdhi0_consumers, | |
663 | }; | |
664 | ||
665 | static struct fixed_voltage_config vcc_sdhi0_info = { | |
666 | .supply_name = "SDHI0 Vcc", | |
667 | .microvolts = 3300000, | |
f5c02edc | 668 | .gpio = 75, |
3a5eed5f GL |
669 | .enable_high = 1, |
670 | .init_data = &vcc_sdhi0_init_data, | |
671 | }; | |
672 | ||
673 | static struct platform_device vcc_sdhi0 = { | |
674 | .name = "reg-fixed-voltage", | |
675 | .id = 1, | |
676 | .dev = { | |
677 | .platform_data = &vcc_sdhi0_info, | |
678 | }, | |
679 | }; | |
680 | ||
681 | /* 1.8 / 3.3V SDHI0 VccQ regulator */ | |
682 | static struct regulator_consumer_supply vccq_sdhi0_consumers[] = { | |
f65ad7e3 | 683 | REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), |
3a5eed5f GL |
684 | }; |
685 | ||
686 | static struct regulator_init_data vccq_sdhi0_init_data = { | |
687 | .constraints = { | |
688 | .input_uV = 3300000, | |
689 | .min_uV = 1800000, | |
690 | .max_uV = 3300000, | |
691 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | | |
692 | REGULATOR_CHANGE_STATUS, | |
693 | }, | |
694 | .num_consumer_supplies = ARRAY_SIZE(vccq_sdhi0_consumers), | |
695 | .consumer_supplies = vccq_sdhi0_consumers, | |
696 | }; | |
697 | ||
698 | static struct gpio vccq_sdhi0_gpios[] = { | |
f5c02edc | 699 | {17, GPIOF_OUT_INIT_LOW, "vccq-sdhi0" }, |
3a5eed5f GL |
700 | }; |
701 | ||
702 | static struct gpio_regulator_state vccq_sdhi0_states[] = { | |
703 | { .value = 3300000, .gpios = (0 << 0) }, | |
704 | { .value = 1800000, .gpios = (1 << 0) }, | |
705 | }; | |
706 | ||
707 | static struct gpio_regulator_config vccq_sdhi0_info = { | |
708 | .supply_name = "vqmmc", | |
709 | ||
f5c02edc | 710 | .enable_gpio = 74, |
3a5eed5f GL |
711 | .enable_high = 1, |
712 | .enabled_at_boot = 0, | |
713 | ||
714 | .gpios = vccq_sdhi0_gpios, | |
715 | .nr_gpios = ARRAY_SIZE(vccq_sdhi0_gpios), | |
716 | ||
717 | .states = vccq_sdhi0_states, | |
718 | .nr_states = ARRAY_SIZE(vccq_sdhi0_states), | |
719 | ||
720 | .type = REGULATOR_VOLTAGE, | |
721 | .init_data = &vccq_sdhi0_init_data, | |
722 | }; | |
723 | ||
724 | static struct platform_device vccq_sdhi0 = { | |
725 | .name = "gpio-regulator", | |
726 | .id = -1, | |
727 | .dev = { | |
728 | .platform_data = &vccq_sdhi0_info, | |
729 | }, | |
730 | }; | |
731 | ||
a9060f89 GL |
732 | /* Fixed 3.3V regulator to be used by SDHI1 */ |
733 | static struct regulator_consumer_supply vcc_sdhi1_consumers[] = { | |
f65ad7e3 | 734 | REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), |
a9060f89 GL |
735 | }; |
736 | ||
737 | static struct regulator_init_data vcc_sdhi1_init_data = { | |
738 | .constraints = { | |
739 | .valid_ops_mask = REGULATOR_CHANGE_STATUS, | |
740 | }, | |
741 | .num_consumer_supplies = ARRAY_SIZE(vcc_sdhi1_consumers), | |
742 | .consumer_supplies = vcc_sdhi1_consumers, | |
743 | }; | |
744 | ||
745 | static struct fixed_voltage_config vcc_sdhi1_info = { | |
746 | .supply_name = "SDHI1 Vcc", | |
747 | .microvolts = 3300000, | |
f5c02edc | 748 | .gpio = 16, |
a9060f89 GL |
749 | .enable_high = 1, |
750 | .init_data = &vcc_sdhi1_init_data, | |
751 | }; | |
752 | ||
753 | static struct platform_device vcc_sdhi1 = { | |
754 | .name = "reg-fixed-voltage", | |
755 | .id = 2, | |
756 | .dev = { | |
757 | .platform_data = &vcc_sdhi1_info, | |
758 | }, | |
f65ad7e3 GL |
759 | }; |
760 | ||
49c01112 | 761 | /* SDHI0 */ |
49c01112 | 762 | static struct sh_mobile_sdhi_info sdhi0_info = { |
95798e35 KM |
763 | .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, |
764 | .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, | |
a9060f89 GL |
765 | .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | |
766 | MMC_CAP_POWER_OFF_CARD, | |
aee14423 | 767 | .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, |
f5c02edc | 768 | .cd_gpio = 167, |
49c01112 KM |
769 | }; |
770 | ||
771 | static struct resource sdhi0_resources[] = { | |
772 | { | |
773 | .name = "SDHI0", | |
774 | .start = 0xe6850000, | |
775 | .end = 0xe6850100 - 1, | |
776 | .flags = IORESOURCE_MEM, | |
777 | }, | |
778 | /* | |
779 | * no SH_MOBILE_SDHI_IRQ_CARD_DETECT here | |
780 | */ | |
781 | { | |
782 | .name = SH_MOBILE_SDHI_IRQ_SDCARD, | |
0b7d7820 | 783 | .start = gic_spi(118), |
49c01112 KM |
784 | .flags = IORESOURCE_IRQ, |
785 | }, | |
786 | { | |
787 | .name = SH_MOBILE_SDHI_IRQ_SDIO, | |
0b7d7820 | 788 | .start = gic_spi(119), |
49c01112 KM |
789 | .flags = IORESOURCE_IRQ, |
790 | }, | |
791 | }; | |
792 | ||
793 | static struct platform_device sdhi0_device = { | |
794 | .name = "sh_mobile_sdhi", | |
795 | .id = 0, | |
796 | .dev = { | |
797 | .platform_data = &sdhi0_info, | |
798 | }, | |
799 | .num_resources = ARRAY_SIZE(sdhi0_resources), | |
800 | .resource = sdhi0_resources, | |
801 | }; | |
802 | ||
2e3a5ef2 KM |
803 | /* SDHI1 */ |
804 | static struct sh_mobile_sdhi_info sdhi1_info = { | |
95798e35 KM |
805 | .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, |
806 | .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, | |
a9060f89 GL |
807 | .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | |
808 | MMC_CAP_POWER_OFF_CARD, | |
aee14423 GL |
809 | .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, |
810 | /* Port72 cannot generate IRQs, will be used in polling mode. */ | |
f5c02edc | 811 | .cd_gpio = 72, |
2e3a5ef2 KM |
812 | }; |
813 | ||
814 | static struct resource sdhi1_resources[] = { | |
815 | [0] = { | |
816 | .name = "SDHI1", | |
817 | .start = 0xe6860000, | |
818 | .end = 0xe6860100 - 1, | |
819 | .flags = IORESOURCE_MEM, | |
820 | }, | |
821 | [1] = { | |
0b7d7820 | 822 | .start = gic_spi(121), |
2e3a5ef2 KM |
823 | .flags = IORESOURCE_IRQ, |
824 | }, | |
825 | [2] = { | |
0b7d7820 | 826 | .start = gic_spi(122), |
2e3a5ef2 KM |
827 | .flags = IORESOURCE_IRQ, |
828 | }, | |
829 | [3] = { | |
0b7d7820 | 830 | .start = gic_spi(123), |
2e3a5ef2 KM |
831 | .flags = IORESOURCE_IRQ, |
832 | }, | |
833 | }; | |
834 | ||
835 | static struct platform_device sdhi1_device = { | |
836 | .name = "sh_mobile_sdhi", | |
837 | .id = 1, | |
838 | .dev = { | |
839 | .platform_data = &sdhi1_info, | |
840 | }, | |
841 | .num_resources = ARRAY_SIZE(sdhi1_resources), | |
842 | .resource = sdhi1_resources, | |
843 | }; | |
844 | ||
c9e3a32f LP |
845 | static const struct pinctrl_map eva_sdhi1_pinctrl_map[] = { |
846 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740", | |
847 | "sdhi1_data4", "sdhi1"), | |
848 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740", | |
849 | "sdhi1_ctrl", "sdhi1"), | |
850 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740", | |
851 | "sdhi1_cd", "sdhi1"), | |
852 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740", | |
853 | "sdhi1_wp", "sdhi1"), | |
854 | }; | |
855 | ||
0a4266bb KM |
856 | /* MMCIF */ |
857 | static struct sh_mmcif_plat_data sh_mmcif_plat = { | |
858 | .sup_pclk = 0, | |
0a4266bb KM |
859 | .caps = MMC_CAP_4_BIT_DATA | |
860 | MMC_CAP_8_BIT_DATA | | |
861 | MMC_CAP_NONREMOVABLE, | |
fbf3264c | 862 | .ccs_unsupported = true, |
87284208 GL |
863 | .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, |
864 | .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, | |
0a4266bb KM |
865 | }; |
866 | ||
867 | static struct resource sh_mmcif_resources[] = { | |
868 | [0] = { | |
869 | .name = "MMCIF", | |
870 | .start = 0xe6bd0000, | |
871 | .end = 0xe6bd0100 - 1, | |
872 | .flags = IORESOURCE_MEM, | |
873 | }, | |
874 | [1] = { | |
875 | /* MMC ERR */ | |
0b7d7820 | 876 | .start = gic_spi(56), |
0a4266bb KM |
877 | .flags = IORESOURCE_IRQ, |
878 | }, | |
879 | [2] = { | |
880 | /* MMC NOR */ | |
0b7d7820 | 881 | .start = gic_spi(57), |
0a4266bb KM |
882 | .flags = IORESOURCE_IRQ, |
883 | }, | |
884 | }; | |
885 | ||
886 | static struct platform_device sh_mmcif_device = { | |
887 | .name = "sh_mmcif", | |
888 | .id = -1, | |
889 | .dev = { | |
890 | .platform_data = &sh_mmcif_plat, | |
891 | }, | |
892 | .num_resources = ARRAY_SIZE(sh_mmcif_resources), | |
893 | .resource = sh_mmcif_resources, | |
894 | }; | |
895 | ||
3760e794 KM |
896 | /* Camera */ |
897 | static int mt9t111_power(struct device *dev, int mode) | |
898 | { | |
899 | struct clk *mclk = clk_get(NULL, "video1"); | |
900 | ||
901 | if (IS_ERR(mclk)) { | |
902 | dev_err(dev, "can't get video1 clock\n"); | |
903 | return -EINVAL; | |
904 | } | |
905 | ||
906 | if (mode) { | |
907 | /* video1 (= CON1 camera) expect 24MHz */ | |
908 | clk_set_rate(mclk, clk_round_rate(mclk, 24000000)); | |
909 | clk_enable(mclk); | |
ead10fed | 910 | gpio_set_value(158, 1); |
3760e794 | 911 | } else { |
ead10fed | 912 | gpio_set_value(158, 0); |
3760e794 KM |
913 | clk_disable(mclk); |
914 | } | |
915 | ||
916 | clk_put(mclk); | |
917 | ||
918 | return 0; | |
919 | } | |
920 | ||
921 | static struct i2c_board_info i2c_camera_mt9t111 = { | |
922 | I2C_BOARD_INFO("mt9t112", 0x3d), | |
923 | }; | |
924 | ||
925 | static struct mt9t112_camera_info mt9t111_info = { | |
926 | .divider = { 16, 0, 0, 7, 0, 10, 14, 7, 7 }, | |
927 | }; | |
928 | ||
929 | static struct soc_camera_link mt9t111_link = { | |
930 | .i2c_adapter_id = 0, | |
931 | .bus_id = 0, | |
932 | .board_info = &i2c_camera_mt9t111, | |
933 | .power = mt9t111_power, | |
934 | .priv = &mt9t111_info, | |
935 | }; | |
936 | ||
937 | static struct platform_device camera_device = { | |
938 | .name = "soc-camera-pdrv", | |
939 | .id = 0, | |
940 | .dev = { | |
941 | .platform_data = &mt9t111_link, | |
942 | }, | |
943 | }; | |
944 | ||
945 | /* CEU0 */ | |
946 | static struct sh_mobile_ceu_info sh_mobile_ceu0_info = { | |
947 | .flags = SH_CEU_FLAG_LOWER_8BIT, | |
948 | }; | |
949 | ||
950 | static struct resource ceu0_resources[] = { | |
951 | [0] = { | |
952 | .name = "CEU", | |
953 | .start = 0xfe910000, | |
954 | .end = 0xfe91009f, | |
955 | .flags = IORESOURCE_MEM, | |
956 | }, | |
957 | [1] = { | |
0b7d7820 | 958 | .start = gic_spi(160), |
3760e794 KM |
959 | .flags = IORESOURCE_IRQ, |
960 | }, | |
961 | [2] = { | |
962 | /* place holder for contiguous memory */ | |
963 | }, | |
964 | }; | |
965 | ||
966 | static struct platform_device ceu0_device = { | |
967 | .name = "sh_mobile_ceu", | |
968 | .id = 0, | |
969 | .num_resources = ARRAY_SIZE(ceu0_resources), | |
970 | .resource = ceu0_resources, | |
971 | .dev = { | |
972 | .platform_data = &sh_mobile_ceu0_info, | |
973 | .coherent_dma_mask = 0xffffffff, | |
974 | }, | |
975 | }; | |
976 | ||
5389bf71 KM |
977 | /* FSI */ |
978 | static struct sh_fsi_platform_info fsi_info = { | |
979 | /* FSI-WM8978 */ | |
980 | .port_a = { | |
dc7dd584 | 981 | .tx_id = SHDMA_SLAVE_FSIA_TX, |
5389bf71 | 982 | }, |
0676c05e KM |
983 | /* FSI-HDMI */ |
984 | .port_b = { | |
985 | .flags = SH_FSI_FMT_SPDIF | | |
13e35b40 KM |
986 | SH_FSI_ENABLE_STREAM_MODE | |
987 | SH_FSI_CLK_CPG, | |
dc7dd584 | 988 | .tx_id = SHDMA_SLAVE_FSIB_TX, |
0676c05e | 989 | } |
5389bf71 KM |
990 | }; |
991 | ||
992 | static struct resource fsi_resources[] = { | |
993 | [0] = { | |
994 | .name = "FSI", | |
995 | .start = 0xfe1f0000, | |
4a4783a3 | 996 | .end = 0xfe1f0400 - 1, |
5389bf71 KM |
997 | .flags = IORESOURCE_MEM, |
998 | }, | |
999 | [1] = { | |
0b7d7820 | 1000 | .start = gic_spi(9), |
5389bf71 KM |
1001 | .flags = IORESOURCE_IRQ, |
1002 | }, | |
1003 | }; | |
1004 | ||
1005 | static struct platform_device fsi_device = { | |
1006 | .name = "sh_fsi2", | |
1007 | .id = -1, | |
1008 | .num_resources = ARRAY_SIZE(fsi_resources), | |
1009 | .resource = fsi_resources, | |
1010 | .dev = { | |
1011 | .platform_data = &fsi_info, | |
1012 | }, | |
1013 | }; | |
1014 | ||
1015 | /* FSI-WM8978 */ | |
5389bf71 KM |
1016 | static struct asoc_simple_card_info fsi_wm8978_info = { |
1017 | .name = "wm8978", | |
1018 | .card = "FSI2A-WM8978", | |
5389bf71 KM |
1019 | .codec = "wm8978.0-001a", |
1020 | .platform = "sh_fsi2", | |
c7a507ee | 1021 | .daifmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM, |
a4a2992c | 1022 | .cpu_dai = { |
7b707277 | 1023 | .fmt = SND_SOC_DAIFMT_IB_NF, |
a4a2992c | 1024 | .name = "fsia-dai", |
a4a2992c KM |
1025 | }, |
1026 | .codec_dai = { | |
1027 | .name = "wm8978-hifi", | |
a4a2992c KM |
1028 | .sysclk = 12288000, |
1029 | }, | |
5389bf71 KM |
1030 | }; |
1031 | ||
1032 | static struct platform_device fsi_wm8978_device = { | |
1033 | .name = "asoc-simple-card", | |
1034 | .id = 0, | |
1035 | .dev = { | |
1036 | .platform_data = &fsi_wm8978_info, | |
ffb83e8c KM |
1037 | .coherent_dma_mask = DMA_BIT_MASK(32), |
1038 | .dma_mask = &fsi_wm8978_device.dev.coherent_dma_mask, | |
5389bf71 KM |
1039 | }, |
1040 | }; | |
1041 | ||
0676c05e | 1042 | /* FSI-HDMI */ |
0676c05e KM |
1043 | static struct asoc_simple_card_info fsi2_hdmi_info = { |
1044 | .name = "HDMI", | |
1045 | .card = "FSI2B-HDMI", | |
0676c05e KM |
1046 | .codec = "sh-mobile-hdmi", |
1047 | .platform = "sh_fsi2", | |
a4a2992c KM |
1048 | .cpu_dai = { |
1049 | .name = "fsib-dai", | |
73035985 | 1050 | .fmt = SND_SOC_DAIFMT_CBS_CFS, |
a4a2992c KM |
1051 | }, |
1052 | .codec_dai = { | |
1053 | .name = "sh_mobile_hdmi-hifi", | |
1054 | }, | |
0676c05e KM |
1055 | }; |
1056 | ||
1057 | static struct platform_device fsi_hdmi_device = { | |
1058 | .name = "asoc-simple-card", | |
1059 | .id = 1, | |
1060 | .dev = { | |
1061 | .platform_data = &fsi2_hdmi_info, | |
ffb83e8c KM |
1062 | .coherent_dma_mask = DMA_BIT_MASK(32), |
1063 | .dma_mask = &fsi_hdmi_device.dev.coherent_dma_mask, | |
0676c05e KM |
1064 | }, |
1065 | }; | |
1066 | ||
b22f6bb0 NI |
1067 | /* RTC: RTC connects i2c-gpio. */ |
1068 | static struct i2c_gpio_platform_data i2c_gpio_data = { | |
ead10fed LP |
1069 | .sda_pin = 208, |
1070 | .scl_pin = 91, | |
b22f6bb0 NI |
1071 | .udelay = 5, /* 100 kHz */ |
1072 | }; | |
1073 | ||
1074 | static struct platform_device i2c_gpio_device = { | |
1075 | .name = "i2c-gpio", | |
1076 | .id = 2, | |
1077 | .dev = { | |
1078 | .platform_data = &i2c_gpio_data, | |
1079 | }, | |
1080 | }; | |
1081 | ||
46cf6687 | 1082 | /* I2C */ |
cbaf7f80 BH |
1083 | static struct st1232_pdata st1232_i2c0_pdata = { |
1084 | .reset_gpio = 166, | |
1085 | }; | |
1086 | ||
46cf6687 KM |
1087 | static struct i2c_board_info i2c0_devices[] = { |
1088 | { | |
1089 | I2C_BOARD_INFO("st1232-ts", 0x55), | |
0b7d7820 | 1090 | .irq = irq_pin(10), |
cbaf7f80 | 1091 | .platform_data = &st1232_i2c0_pdata, |
46cf6687 | 1092 | }, |
5389bf71 KM |
1093 | { |
1094 | I2C_BOARD_INFO("wm8978", 0x1a), | |
1095 | }, | |
46cf6687 KM |
1096 | }; |
1097 | ||
b22f6bb0 NI |
1098 | static struct i2c_board_info i2c2_devices[] = { |
1099 | { | |
1100 | I2C_BOARD_INFO("s35390a", 0x30), | |
1101 | .type = "s35390a", | |
1102 | }, | |
1103 | }; | |
1104 | ||
4d22e564 KM |
1105 | /* |
1106 | * board devices | |
1107 | */ | |
1108 | static struct platform_device *eva_devices[] __initdata = { | |
dad29d1c | 1109 | &lcdc0_device, |
d58226a2 LP |
1110 | &pwm_device, |
1111 | &pwm_backlight_device, | |
111bcc13 | 1112 | &leds_gpio_device, |
f7e7d31a | 1113 | &gpio_keys_device, |
d8fed1e2 | 1114 | &sh_eth_device, |
a9060f89 GL |
1115 | &vcc_sdhi0, |
1116 | &vccq_sdhi0, | |
49c01112 | 1117 | &sdhi0_device, |
0a4266bb | 1118 | &sh_mmcif_device, |
910c14d0 KM |
1119 | &hdmi_device, |
1120 | &hdmi_lcdc_device, | |
3760e794 KM |
1121 | &camera_device, |
1122 | &ceu0_device, | |
5389bf71 KM |
1123 | &fsi_device, |
1124 | &fsi_wm8978_device, | |
ee3c843d | 1125 | &fsi_hdmi_device, |
b22f6bb0 | 1126 | &i2c_gpio_device, |
4d22e564 KM |
1127 | }; |
1128 | ||
79f7182e | 1129 | static const struct pinctrl_map eva_pinctrl_map[] = { |
babde827 LP |
1130 | /* CEU0 */ |
1131 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740", | |
1132 | "ceu0_data_0_7", "ceu0"), | |
1133 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740", | |
1134 | "ceu0_clk_0", "ceu0"), | |
1135 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740", | |
1136 | "ceu0_sync", "ceu0"), | |
1137 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740", | |
1138 | "ceu0_field", "ceu0"), | |
fed8976e LP |
1139 | /* FSIA */ |
1140 | PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740", | |
1141 | "fsia_sclk_in", "fsia"), | |
1142 | PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740", | |
1143 | "fsia_mclk_out", "fsia"), | |
1144 | PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740", | |
1145 | "fsia_data_in_1", "fsia"), | |
1146 | PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740", | |
1147 | "fsia_data_out_0", "fsia"), | |
1148 | /* FSIB */ | |
1149 | PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-r8a7740", | |
1150 | "fsib_mclk_in", "fsib"), | |
613285ce | 1151 | /* GETHER */ |
7cd402b3 | 1152 | PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740", |
613285ce | 1153 | "gether_mii", "gether"), |
7cd402b3 | 1154 | PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740", |
613285ce | 1155 | "gether_int", "gether"), |
f1bb4ab0 LP |
1156 | /* HDMI */ |
1157 | PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-r8a7740", | |
1158 | "hdmi", "hdmi"), | |
79f7182e LP |
1159 | /* LCD0 */ |
1160 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740", | |
1161 | "lcd0_data24_0", "lcd0"), | |
1162 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740", | |
1163 | "lcd0_lclk_1", "lcd0"), | |
1164 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740", | |
1165 | "lcd0_sync", "lcd0"), | |
c9e3a32f LP |
1166 | /* MMCIF */ |
1167 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a7740", | |
1168 | "mmc0_data8_1", "mmc0"), | |
1169 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a7740", | |
1170 | "mmc0_ctrl_1", "mmc0"), | |
7cdfb46e BH |
1171 | /* SCIFA1 */ |
1172 | PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.1", "pfc-r8a7740", | |
1173 | "scifa1_data", "scifa1"), | |
c9e3a32f LP |
1174 | /* SDHI0 */ |
1175 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740", | |
1176 | "sdhi0_data4", "sdhi0"), | |
1177 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740", | |
1178 | "sdhi0_ctrl", "sdhi0"), | |
1179 | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740", | |
1180 | "sdhi0_wp", "sdhi0"), | |
89ae7b5b LP |
1181 | /* ST1232 */ |
1182 | PIN_MAP_MUX_GROUP_DEFAULT("0-0055", "pfc-r8a7740", | |
1183 | "intc_irq10", "intc"), | |
d58226a2 LP |
1184 | /* TPU0 */ |
1185 | PIN_MAP_MUX_GROUP_DEFAULT("renesas-tpu-pwm", "pfc-r8a7740", | |
1186 | "tpu0_to2_1", "tpu0"), | |
89ae7b5b LP |
1187 | /* USBHS */ |
1188 | PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-r8a7740", | |
1189 | "intc_irq7_1", "intc"), | |
79f7182e LP |
1190 | }; |
1191 | ||
1c96293e KM |
1192 | static void __init eva_clock_init(void) |
1193 | { | |
1194 | struct clk *system = clk_get(NULL, "system_clk"); | |
1195 | struct clk *xtal1 = clk_get(NULL, "extal1"); | |
1196 | struct clk *usb24s = clk_get(NULL, "usb24s"); | |
0676c05e | 1197 | struct clk *fsibck = clk_get(NULL, "fsibck"); |
1c96293e KM |
1198 | |
1199 | if (IS_ERR(system) || | |
1200 | IS_ERR(xtal1) || | |
0676c05e | 1201 | IS_ERR(usb24s) || |
13e35b40 | 1202 | IS_ERR(fsibck)) { |
1c96293e KM |
1203 | pr_err("armadillo800eva board clock init failed\n"); |
1204 | goto clock_error; | |
1205 | } | |
1206 | ||
1207 | /* armadillo 800 eva extal1 is 24MHz */ | |
1208 | clk_set_rate(xtal1, 24000000); | |
1209 | ||
1210 | /* usb24s use extal1 (= system) clock (= 24MHz) */ | |
1211 | clk_set_parent(usb24s, system); | |
1212 | ||
0676c05e | 1213 | /* FSIBCK is 12.288MHz, and it is parent of FSI-B */ |
0676c05e | 1214 | clk_set_rate(fsibck, 12288000); |
0676c05e | 1215 | |
1c96293e KM |
1216 | clock_error: |
1217 | if (!IS_ERR(system)) | |
1218 | clk_put(system); | |
1219 | if (!IS_ERR(xtal1)) | |
1220 | clk_put(xtal1); | |
1221 | if (!IS_ERR(usb24s)) | |
1222 | clk_put(usb24s); | |
0676c05e KM |
1223 | if (!IS_ERR(fsibck)) |
1224 | clk_put(fsibck); | |
1c96293e KM |
1225 | } |
1226 | ||
4d22e564 KM |
1227 | /* |
1228 | * board init | |
1229 | */ | |
0a4b04dc AB |
1230 | #define GPIO_PORT7CR IOMEM(0xe6050007) |
1231 | #define GPIO_PORT8CR IOMEM(0xe6050008) | |
4d22e564 KM |
1232 | static void __init eva_init(void) |
1233 | { | |
834720db GU |
1234 | static struct pm_domain_device domain_devices[] __initdata = { |
1235 | { "A4LC", &lcdc0_device }, | |
1236 | { "A4LC", &hdmi_lcdc_device }, | |
1237 | }; | |
0f54788d KM |
1238 | struct platform_device *usb = NULL; |
1239 | ||
f65ad7e3 GL |
1240 | regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, |
1241 | ARRAY_SIZE(fixed3v3_power_consumers), 3300000); | |
9fb444f2 LP |
1242 | regulator_register_always_on(3, "fixed-5.0V", fixed5v0_power_consumers, |
1243 | ARRAY_SIZE(fixed5v0_power_consumers), 5000000); | |
1c96293e | 1244 | |
79f7182e | 1245 | pinctrl_register_mappings(eva_pinctrl_map, ARRAY_SIZE(eva_pinctrl_map)); |
d58226a2 | 1246 | pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup)); |
79f7182e | 1247 | |
4d22e564 | 1248 | r8a7740_pinmux_init(); |
d49679e5 | 1249 | r8a7740_meram_workaround(); |
4d22e564 | 1250 | |
d8fed1e2 | 1251 | /* GETHER */ |
ead10fed | 1252 | gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */ |
d8fed1e2 | 1253 | |
1c96293e | 1254 | /* USB */ |
ead10fed | 1255 | gpio_request_one(159, GPIOF_IN, NULL); /* USB_DEVICE_MODE */ |
1c96293e | 1256 | |
ead10fed | 1257 | if (gpio_get_value(159)) { |
1c96293e KM |
1258 | /* USB Host */ |
1259 | } else { | |
1260 | /* USB Func */ | |
d483b983 | 1261 | /* |
89ae7b5b LP |
1262 | * The USBHS interrupt handlers needs to read the IRQ pin value |
1263 | * (HI/LOW) to diffentiate USB connection and disconnection | |
1264 | * events (usbhsf_get_vbus()). We thus need to select both the | |
1265 | * intc_irq7_1 pin group and GPIO 209 here. | |
d483b983 | 1266 | */ |
ead10fed | 1267 | gpio_request_one(209, GPIOF_IN, NULL); |
d483b983 | 1268 | |
1c96293e | 1269 | platform_device_register(&usbhsf_device); |
0f54788d | 1270 | usb = &usbhsf_device; |
1c96293e KM |
1271 | } |
1272 | ||
3760e794 | 1273 | /* CON1/CON15 Camera */ |
ead10fed LP |
1274 | gpio_request_one(173, GPIOF_OUT_INIT_LOW, NULL); /* STANDBY */ |
1275 | gpio_request_one(172, GPIOF_OUT_INIT_HIGH, NULL); /* RST */ | |
0f69e708 | 1276 | /* see mt9t111_power() */ |
ead10fed | 1277 | gpio_request_one(158, GPIOF_OUT_INIT_LOW, NULL); /* CAM_PON */ |
3760e794 | 1278 | |
5389bf71 | 1279 | /* FSI-WM8978 */ |
ead10fed LP |
1280 | gpio_request(7, NULL); |
1281 | gpio_request(8, NULL); | |
a01366b4 KM |
1282 | gpio_direction_none(GPIO_PORT7CR); /* FSIAOBT needs no direction */ |
1283 | gpio_direction_none(GPIO_PORT8CR); /* FSIAOLR needs no direction */ | |
5389bf71 | 1284 | |
dad29d1c KM |
1285 | /* |
1286 | * CAUTION | |
1287 | * | |
1288 | * DBGMD/LCDC0/FSIA MUX | |
1289 | * DBGMD_SELECT_B should be set after setting PFC Function. | |
1290 | */ | |
ead10fed | 1291 | gpio_request_one(176, GPIOF_OUT_INIT_HIGH, NULL); |
dad29d1c | 1292 | |
2e3a5ef2 KM |
1293 | /* |
1294 | * We can switch CON8/CON14 by SW1.5, | |
1295 | * but it needs after DBGMD_SELECT_B | |
1296 | */ | |
ead10fed LP |
1297 | gpio_request_one(6, GPIOF_IN, NULL); |
1298 | if (gpio_get_value(6)) { | |
2e3a5ef2 KM |
1299 | /* CON14 enable */ |
1300 | } else { | |
1301 | /* CON8 (SDHI1) enable */ | |
c9e3a32f LP |
1302 | pinctrl_register_mappings(eva_sdhi1_pinctrl_map, |
1303 | ARRAY_SIZE(eva_sdhi1_pinctrl_map)); | |
2e3a5ef2 | 1304 | |
a9060f89 | 1305 | platform_device_register(&vcc_sdhi1); |
2e3a5ef2 KM |
1306 | platform_device_register(&sdhi1_device); |
1307 | } | |
1308 | ||
1309 | ||
4d22e564 | 1310 | #ifdef CONFIG_CACHE_L2X0 |
36bccb11 | 1311 | /* Shared attribute override enable, 32K*8way */ |
2edb89cd | 1312 | l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff); |
4d22e564 KM |
1313 | #endif |
1314 | ||
46cf6687 | 1315 | i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices)); |
b22f6bb0 | 1316 | i2c_register_board_info(2, i2c2_devices, ARRAY_SIZE(i2c2_devices)); |
46cf6687 | 1317 | |
4d22e564 KM |
1318 | r8a7740_add_standard_devices(); |
1319 | ||
1320 | platform_add_devices(eva_devices, | |
1321 | ARRAY_SIZE(eva_devices)); | |
0676c05e | 1322 | |
834720db GU |
1323 | rmobile_add_devices_to_domains(domain_devices, |
1324 | ARRAY_SIZE(domain_devices)); | |
0f54788d | 1325 | if (usb) |
8bdd9468 | 1326 | rmobile_add_device_to_domain("A3SP", usb); |
895d3b53 BH |
1327 | |
1328 | r8a7740_pm_init(); | |
4d22e564 KM |
1329 | } |
1330 | ||
1331 | static void __init eva_earlytimer_init(void) | |
1332 | { | |
4d22e564 | 1333 | r8a7740_clock_init(MD_CK0 | MD_CK2); |
4d22e564 | 1334 | shmobile_earlytimer_init(); |
2f27c406 HE |
1335 | |
1336 | /* the rate of extal1 clock must be set before late_time_init */ | |
1337 | eva_clock_init(); | |
4d22e564 KM |
1338 | } |
1339 | ||
1efdf563 | 1340 | #define RESCNT2 IOMEM(0xe6188020) |
7b6d864b | 1341 | static void eva_restart(enum reboot_mode mode, const char *cmd) |
1efdf563 KM |
1342 | { |
1343 | /* Do soft power on reset */ | |
1344 | writel((1 << 31), RESCNT2); | |
1345 | } | |
1346 | ||
e6bf7059 MD |
1347 | static const char *eva_boards_compat_dt[] __initdata = { |
1348 | "renesas,armadillo800eva", | |
1349 | NULL, | |
1350 | }; | |
1351 | ||
1352 | DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva") | |
4d22e564 | 1353 | .map_io = r8a7740_map_io, |
fd105ecf | 1354 | .init_early = r8a7740_add_early_devices, |
15645581 | 1355 | .init_irq = r8a7740_init_irq_of, |
4d22e564 | 1356 | .init_machine = eva_init, |
37f971b6 | 1357 | .init_late = shmobile_init_late, |
6bb27d73 | 1358 | .init_time = eva_earlytimer_init, |
e6bf7059 | 1359 | .dt_compat = eva_boards_compat_dt, |
1efdf563 | 1360 | .restart = eva_restart, |
4d22e564 | 1361 | MACHINE_END |