Commit | Line | Data |
---|---|---|
9703d9d7 CM |
1 | /* |
2 | * Low-level CPU initialisation | |
3 | * Based on arch/arm/kernel/head.S | |
4 | * | |
5 | * Copyright (C) 1994-2002 Russell King | |
6 | * Copyright (C) 2003-2012 ARM Ltd. | |
7 | * Authors: Catalin Marinas <catalin.marinas@arm.com> | |
8 | * Will Deacon <will.deacon@arm.com> | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or modify | |
11 | * it under the terms of the GNU General Public License version 2 as | |
12 | * published by the Free Software Foundation. | |
13 | * | |
14 | * This program is distributed in the hope that it will be useful, | |
15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
17 | * GNU General Public License for more details. | |
18 | * | |
19 | * You should have received a copy of the GNU General Public License | |
20 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
21 | */ | |
22 | ||
23 | #include <linux/linkage.h> | |
24 | #include <linux/init.h> | |
021f6537 | 25 | #include <linux/irqchip/arm-gic-v3.h> |
9703d9d7 CM |
26 | |
27 | #include <asm/assembler.h> | |
08cdac61 | 28 | #include <asm/boot.h> |
9703d9d7 CM |
29 | #include <asm/ptrace.h> |
30 | #include <asm/asm-offsets.h> | |
c218bca7 | 31 | #include <asm/cache.h> |
0359b0e2 | 32 | #include <asm/cputype.h> |
1e48ef7f | 33 | #include <asm/elf.h> |
87d1587b | 34 | #include <asm/kernel-pgtable.h> |
1f364c8c | 35 | #include <asm/kvm_arm.h> |
9703d9d7 | 36 | #include <asm/memory.h> |
9703d9d7 CM |
37 | #include <asm/pgtable-hwdef.h> |
38 | #include <asm/pgtable.h> | |
39 | #include <asm/page.h> | |
bb905274 | 40 | #include <asm/smp.h> |
4bf8b96e SP |
41 | #include <asm/sysreg.h> |
42 | #include <asm/thread_info.h> | |
f35a9205 | 43 | #include <asm/virt.h> |
9703d9d7 | 44 | |
6f4d57fa | 45 | #define __PHYS_OFFSET (KERNEL_START - TEXT_OFFSET) |
9703d9d7 | 46 | |
4190312b AB |
47 | #if (TEXT_OFFSET & 0xfff) != 0 |
48 | #error TEXT_OFFSET must be at least 4KB aligned | |
49 | #elif (PAGE_OFFSET & 0x1fffff) != 0 | |
da57a369 | 50 | #error PAGE_OFFSET must be at least 2MB aligned |
4190312b | 51 | #elif TEXT_OFFSET > 0x1fffff |
da57a369 | 52 | #error TEXT_OFFSET must be less than 2MB |
9703d9d7 CM |
53 | #endif |
54 | ||
9703d9d7 CM |
55 | /* |
56 | * Kernel startup entry point. | |
57 | * --------------------------- | |
58 | * | |
59 | * The requirements are: | |
60 | * MMU = off, D-cache = off, I-cache = on or off, | |
61 | * x0 = physical address to the FDT blob. | |
62 | * | |
63 | * This code is mostly position independent so you call this at | |
64 | * __pa(PAGE_OFFSET + TEXT_OFFSET). | |
65 | * | |
66 | * Note that the callee-saved registers are used for storing variables | |
67 | * that are useful before the MMU is enabled. The allocations are described | |
68 | * in the entry routines. | |
69 | */ | |
70 | __HEAD | |
2bf31a4a | 71 | _head: |
9703d9d7 CM |
72 | /* |
73 | * DO NOT MODIFY. Image header expected by Linux boot-loaders. | |
74 | */ | |
3c7f2550 | 75 | #ifdef CONFIG_EFI |
3c7f2550 MS |
76 | /* |
77 | * This add instruction has no meaningful effect except that | |
78 | * its opcode forms the magic "MZ" signature required by UEFI. | |
79 | */ | |
80 | add x13, x18, #0x16 | |
81 | b stext | |
82 | #else | |
9703d9d7 CM |
83 | b stext // branch to kernel start, magic |
84 | .long 0 // reserved | |
3c7f2550 | 85 | #endif |
6ad1fe5d AB |
86 | le64sym _kernel_offset_le // Image load offset from start of RAM, little-endian |
87 | le64sym _kernel_size_le // Effective size of kernel image, little-endian | |
88 | le64sym _kernel_flags_le // Informative flags, little-endian | |
4370eec0 RF |
89 | .quad 0 // reserved |
90 | .quad 0 // reserved | |
91 | .quad 0 // reserved | |
92 | .byte 0x41 // Magic number, "ARM\x64" | |
93 | .byte 0x52 | |
94 | .byte 0x4d | |
95 | .byte 0x64 | |
3c7f2550 | 96 | #ifdef CONFIG_EFI |
2bf31a4a | 97 | .long pe_header - _head // Offset to the PE header. |
3c7f2550 | 98 | #else |
4370eec0 | 99 | .word 0 // reserved |
3c7f2550 MS |
100 | #endif |
101 | ||
102 | #ifdef CONFIG_EFI | |
103 | .align 3 | |
104 | pe_header: | |
105 | .ascii "PE" | |
106 | .short 0 | |
107 | coff_header: | |
108 | .short 0xaa64 // AArch64 | |
109 | .short 2 // nr_sections | |
110 | .long 0 // TimeDateStamp | |
111 | .long 0 // PointerToSymbolTable | |
112 | .long 1 // NumberOfSymbols | |
113 | .short section_table - optional_header // SizeOfOptionalHeader | |
114 | .short 0x206 // Characteristics. | |
115 | // IMAGE_FILE_DEBUG_STRIPPED | | |
116 | // IMAGE_FILE_EXECUTABLE_IMAGE | | |
117 | // IMAGE_FILE_LINE_NUMS_STRIPPED | |
118 | optional_header: | |
119 | .short 0x20b // PE32+ format | |
120 | .byte 0x02 // MajorLinkerVersion | |
121 | .byte 0x14 // MinorLinkerVersion | |
546c8c44 | 122 | .long _end - efi_header_end // SizeOfCode |
3c7f2550 MS |
123 | .long 0 // SizeOfInitializedData |
124 | .long 0 // SizeOfUninitializedData | |
2bf31a4a | 125 | .long __efistub_entry - _head // AddressOfEntryPoint |
546c8c44 | 126 | .long efi_header_end - _head // BaseOfCode |
3c7f2550 MS |
127 | |
128 | extra_header_fields: | |
129 | .quad 0 // ImageBase | |
ea6bc80d | 130 | .long 0x1000 // SectionAlignment |
a352ea3e | 131 | .long PECOFF_FILE_ALIGNMENT // FileAlignment |
3c7f2550 MS |
132 | .short 0 // MajorOperatingSystemVersion |
133 | .short 0 // MinorOperatingSystemVersion | |
134 | .short 0 // MajorImageVersion | |
135 | .short 0 // MinorImageVersion | |
136 | .short 0 // MajorSubsystemVersion | |
137 | .short 0 // MinorSubsystemVersion | |
138 | .long 0 // Win32VersionValue | |
139 | ||
2bf31a4a | 140 | .long _end - _head // SizeOfImage |
3c7f2550 MS |
141 | |
142 | // Everything before the kernel image is considered part of the header | |
546c8c44 | 143 | .long efi_header_end - _head // SizeOfHeaders |
3c7f2550 MS |
144 | .long 0 // CheckSum |
145 | .short 0xa // Subsystem (EFI application) | |
146 | .short 0 // DllCharacteristics | |
147 | .quad 0 // SizeOfStackReserve | |
148 | .quad 0 // SizeOfStackCommit | |
149 | .quad 0 // SizeOfHeapReserve | |
150 | .quad 0 // SizeOfHeapCommit | |
151 | .long 0 // LoaderFlags | |
152 | .long 0x6 // NumberOfRvaAndSizes | |
153 | ||
154 | .quad 0 // ExportTable | |
155 | .quad 0 // ImportTable | |
156 | .quad 0 // ResourceTable | |
157 | .quad 0 // ExceptionTable | |
158 | .quad 0 // CertificationTable | |
159 | .quad 0 // BaseRelocationTable | |
160 | ||
161 | // Section table | |
162 | section_table: | |
163 | ||
164 | /* | |
165 | * The EFI application loader requires a relocation section | |
166 | * because EFI applications must be relocatable. This is a | |
167 | * dummy section as far as we are concerned. | |
168 | */ | |
169 | .ascii ".reloc" | |
170 | .byte 0 | |
171 | .byte 0 // end of 0 padding of section name | |
172 | .long 0 | |
173 | .long 0 | |
174 | .long 0 // SizeOfRawData | |
175 | .long 0 // PointerToRawData | |
176 | .long 0 // PointerToRelocations | |
177 | .long 0 // PointerToLineNumbers | |
178 | .short 0 // NumberOfRelocations | |
179 | .short 0 // NumberOfLineNumbers | |
180 | .long 0x42100040 // Characteristics (section flags) | |
181 | ||
182 | ||
183 | .ascii ".text" | |
184 | .byte 0 | |
185 | .byte 0 | |
186 | .byte 0 // end of 0 padding of section name | |
546c8c44 AB |
187 | .long _end - efi_header_end // VirtualSize |
188 | .long efi_header_end - _head // VirtualAddress | |
189 | .long _edata - efi_header_end // SizeOfRawData | |
190 | .long efi_header_end - _head // PointerToRawData | |
3c7f2550 MS |
191 | |
192 | .long 0 // PointerToRelocations (0 for executables) | |
193 | .long 0 // PointerToLineNumbers (0 for executables) | |
194 | .short 0 // NumberOfRelocations (0 for executables) | |
195 | .short 0 // NumberOfLineNumbers (0 for executables) | |
196 | .long 0xe0500020 // Characteristics (section flags) | |
ea6bc80d AB |
197 | |
198 | /* | |
546c8c44 | 199 | * EFI will load .text onwards at the 4k section alignment |
ea6bc80d AB |
200 | * described in the PE/COFF header. To ensure that instruction |
201 | * sequences using an adrp and a :lo12: immediate will function | |
546c8c44 | 202 | * correctly at this alignment, we must ensure that .text is |
ea6bc80d AB |
203 | * placed at a 4k boundary in the Image to begin with. |
204 | */ | |
205 | .align 12 | |
546c8c44 | 206 | efi_header_end: |
3c7f2550 | 207 | #endif |
9703d9d7 | 208 | |
546c8c44 AB |
209 | __INIT |
210 | ||
9703d9d7 | 211 | ENTRY(stext) |
da9c177d | 212 | bl preserve_boot_args |
828e9834 | 213 | bl el2_setup // Drop to EL1, w20=cpu_boot_mode |
6f4d57fa | 214 | adrp x24, __PHYS_OFFSET |
08cdac61 | 215 | and x23, x24, MIN_KIMG_ALIGN - 1 // KASLR offset, defaults to 0 |
828e9834 | 216 | bl set_cpu_boot_mode_flag |
9703d9d7 CM |
217 | bl __create_page_tables // x25=TTBR0, x26=TTBR1 |
218 | /* | |
a591ede4 MZ |
219 | * The following calls CPU setup code, see arch/arm64/mm/proc.S for |
220 | * details. | |
9703d9d7 CM |
221 | * On return, the CPU will be ready for the MMU to be turned on and |
222 | * the TCR will have been set. | |
223 | */ | |
0cd3defe AB |
224 | bl __cpu_setup // initialise processor |
225 | adr_l x27, __primary_switch // address to jump to after | |
9703d9d7 | 226 | // MMU has been enabled |
0cd3defe | 227 | b __enable_mmu |
9703d9d7 CM |
228 | ENDPROC(stext) |
229 | ||
da9c177d AB |
230 | /* |
231 | * Preserve the arguments passed by the bootloader in x0 .. x3 | |
232 | */ | |
233 | preserve_boot_args: | |
234 | mov x21, x0 // x21=FDT | |
235 | ||
236 | adr_l x0, boot_args // record the contents of | |
237 | stp x21, x1, [x0] // x0 .. x3 at kernel entry | |
238 | stp x2, x3, [x0, #16] | |
239 | ||
240 | dmb sy // needed before dc ivac with | |
241 | // MMU off | |
242 | ||
243 | add x1, x0, #0x20 // 4 x 8 bytes | |
244 | b __inval_cache_range // tail call | |
245 | ENDPROC(preserve_boot_args) | |
246 | ||
034edabe LA |
247 | /* |
248 | * Macro to create a table entry to the next page. | |
249 | * | |
250 | * tbl: page table address | |
251 | * virt: virtual address | |
252 | * shift: #imm page table shift | |
253 | * ptrs: #imm pointers per table page | |
254 | * | |
255 | * Preserves: virt | |
256 | * Corrupts: tmp1, tmp2 | |
257 | * Returns: tbl -> next level table page address | |
258 | */ | |
259 | .macro create_table_entry, tbl, virt, shift, ptrs, tmp1, tmp2 | |
260 | lsr \tmp1, \virt, #\shift | |
261 | and \tmp1, \tmp1, #\ptrs - 1 // table index | |
262 | add \tmp2, \tbl, #PAGE_SIZE | |
263 | orr \tmp2, \tmp2, #PMD_TYPE_TABLE // address of next table and entry type | |
264 | str \tmp2, [\tbl, \tmp1, lsl #3] | |
265 | add \tbl, \tbl, #PAGE_SIZE // next level table page | |
266 | .endm | |
267 | ||
268 | /* | |
269 | * Macro to populate the PGD (and possibily PUD) for the corresponding | |
270 | * block entry in the next level (tbl) for the given virtual address. | |
271 | * | |
272 | * Preserves: tbl, next, virt | |
273 | * Corrupts: tmp1, tmp2 | |
274 | */ | |
275 | .macro create_pgd_entry, tbl, virt, tmp1, tmp2 | |
276 | create_table_entry \tbl, \virt, PGDIR_SHIFT, PTRS_PER_PGD, \tmp1, \tmp2 | |
6a3fd402 SP |
277 | #if SWAPPER_PGTABLE_LEVELS > 3 |
278 | create_table_entry \tbl, \virt, PUD_SHIFT, PTRS_PER_PUD, \tmp1, \tmp2 | |
279 | #endif | |
280 | #if SWAPPER_PGTABLE_LEVELS > 2 | |
87d1587b | 281 | create_table_entry \tbl, \virt, SWAPPER_TABLE_SHIFT, PTRS_PER_PTE, \tmp1, \tmp2 |
034edabe LA |
282 | #endif |
283 | .endm | |
284 | ||
285 | /* | |
286 | * Macro to populate block entries in the page table for the start..end | |
287 | * virtual range (inclusive). | |
288 | * | |
289 | * Preserves: tbl, flags | |
290 | * Corrupts: phys, start, end, pstate | |
291 | */ | |
292 | .macro create_block_map, tbl, flags, phys, start, end | |
87d1587b SP |
293 | lsr \phys, \phys, #SWAPPER_BLOCK_SHIFT |
294 | lsr \start, \start, #SWAPPER_BLOCK_SHIFT | |
034edabe | 295 | and \start, \start, #PTRS_PER_PTE - 1 // table index |
87d1587b SP |
296 | orr \phys, \flags, \phys, lsl #SWAPPER_BLOCK_SHIFT // table entry |
297 | lsr \end, \end, #SWAPPER_BLOCK_SHIFT | |
034edabe LA |
298 | and \end, \end, #PTRS_PER_PTE - 1 // table end index |
299 | 9999: str \phys, [\tbl, \start, lsl #3] // store the entry | |
300 | add \start, \start, #1 // next entry | |
87d1587b | 301 | add \phys, \phys, #SWAPPER_BLOCK_SIZE // next block |
034edabe LA |
302 | cmp \start, \end |
303 | b.ls 9999b | |
304 | .endm | |
305 | ||
306 | /* | |
307 | * Setup the initial page tables. We only setup the barest amount which is | |
308 | * required to get the kernel running. The following sections are required: | |
309 | * - identity mapping to enable the MMU (low address, TTBR0) | |
310 | * - first few MB of the kernel linear mapping to jump to once the MMU has | |
61bd93ce | 311 | * been enabled |
034edabe LA |
312 | */ |
313 | __create_page_tables: | |
6f4d57fa AB |
314 | adrp x25, idmap_pg_dir |
315 | adrp x26, swapper_pg_dir | |
f80fb3a3 | 316 | mov x28, lr |
034edabe LA |
317 | |
318 | /* | |
319 | * Invalidate the idmap and swapper page tables to avoid potential | |
320 | * dirty cache lines being evicted. | |
321 | */ | |
322 | mov x0, x25 | |
323 | add x1, x26, #SWAPPER_DIR_SIZE | |
324 | bl __inval_cache_range | |
325 | ||
326 | /* | |
327 | * Clear the idmap and swapper page tables. | |
328 | */ | |
329 | mov x0, x25 | |
330 | add x6, x26, #SWAPPER_DIR_SIZE | |
331 | 1: stp xzr, xzr, [x0], #16 | |
332 | stp xzr, xzr, [x0], #16 | |
333 | stp xzr, xzr, [x0], #16 | |
334 | stp xzr, xzr, [x0], #16 | |
335 | cmp x0, x6 | |
336 | b.lo 1b | |
337 | ||
b03cc885 | 338 | mov x7, SWAPPER_MM_MMUFLAGS |
034edabe LA |
339 | |
340 | /* | |
341 | * Create the identity mapping. | |
342 | */ | |
343 | mov x0, x25 // idmap_pg_dir | |
5dfe9d7d | 344 | adrp x3, __idmap_text_start // __pa(__idmap_text_start) |
dd006da2 AB |
345 | |
346 | #ifndef CONFIG_ARM64_VA_BITS_48 | |
347 | #define EXTRA_SHIFT (PGDIR_SHIFT + PAGE_SHIFT - 3) | |
348 | #define EXTRA_PTRS (1 << (48 - EXTRA_SHIFT)) | |
349 | ||
350 | /* | |
351 | * If VA_BITS < 48, it may be too small to allow for an ID mapping to be | |
352 | * created that covers system RAM if that is located sufficiently high | |
353 | * in the physical address space. So for the ID map, use an extended | |
354 | * virtual range in that case, by configuring an additional translation | |
355 | * level. | |
356 | * First, we have to verify our assumption that the current value of | |
357 | * VA_BITS was chosen such that all translation levels are fully | |
358 | * utilised, and that lowering T0SZ will always result in an additional | |
359 | * translation level to be configured. | |
360 | */ | |
361 | #if VA_BITS != EXTRA_SHIFT | |
362 | #error "Mismatch between VA_BITS and page size/number of translation levels" | |
363 | #endif | |
364 | ||
365 | /* | |
366 | * Calculate the maximum allowed value for TCR_EL1.T0SZ so that the | |
5dfe9d7d | 367 | * entire ID map region can be mapped. As T0SZ == (64 - #bits used), |
dd006da2 | 368 | * this number conveniently equals the number of leading zeroes in |
5dfe9d7d | 369 | * the physical address of __idmap_text_end. |
dd006da2 | 370 | */ |
5dfe9d7d | 371 | adrp x5, __idmap_text_end |
dd006da2 AB |
372 | clz x5, x5 |
373 | cmp x5, TCR_T0SZ(VA_BITS) // default T0SZ small enough? | |
374 | b.ge 1f // .. then skip additional level | |
375 | ||
0c20856c MR |
376 | adr_l x6, idmap_t0sz |
377 | str x5, [x6] | |
378 | dmb sy | |
379 | dc ivac, x6 // Invalidate potentially stale cache line | |
dd006da2 AB |
380 | |
381 | create_table_entry x0, x3, EXTRA_SHIFT, EXTRA_PTRS, x5, x6 | |
382 | 1: | |
383 | #endif | |
384 | ||
034edabe | 385 | create_pgd_entry x0, x3, x5, x6 |
5dfe9d7d AB |
386 | mov x5, x3 // __pa(__idmap_text_start) |
387 | adr_l x6, __idmap_text_end // __pa(__idmap_text_end) | |
034edabe LA |
388 | create_block_map x0, x7, x3, x5, x6 |
389 | ||
390 | /* | |
391 | * Map the kernel image (starting with PHYS_OFFSET). | |
392 | */ | |
393 | mov x0, x26 // swapper_pg_dir | |
18b9c0d6 | 394 | mov_q x5, KIMAGE_VADDR + TEXT_OFFSET // compile time __va(_text) |
f80fb3a3 | 395 | add x5, x5, x23 // add KASLR displacement |
034edabe | 396 | create_pgd_entry x0, x5, x3, x6 |
18b9c0d6 AB |
397 | adrp x6, _end // runtime __pa(_end) |
398 | adrp x3, _text // runtime __pa(_text) | |
399 | sub x6, x6, x3 // _end - _text | |
400 | add x6, x6, x5 // runtime __va(_end) | |
034edabe LA |
401 | create_block_map x0, x7, x3, x5, x6 |
402 | ||
034edabe LA |
403 | /* |
404 | * Since the page tables have been populated with non-cacheable | |
405 | * accesses (MMU disabled), invalidate the idmap and swapper page | |
406 | * tables again to remove any speculatively loaded cache lines. | |
407 | */ | |
408 | mov x0, x25 | |
409 | add x1, x26, #SWAPPER_DIR_SIZE | |
91d57155 | 410 | dmb sy |
034edabe LA |
411 | bl __inval_cache_range |
412 | ||
f80fb3a3 | 413 | ret x28 |
034edabe LA |
414 | ENDPROC(__create_page_tables) |
415 | .ltorg | |
416 | ||
034edabe | 417 | /* |
a871d354 | 418 | * The following fragment of code is executed with the MMU enabled. |
034edabe | 419 | */ |
a871d354 | 420 | .set initial_sp, init_thread_union + THREAD_START_SP |
0cd3defe | 421 | __primary_switched: |
f80fb3a3 | 422 | mov x28, lr // preserve LR |
2bf31a4a AB |
423 | adr_l x8, vectors // load VBAR_EL1 with virtual |
424 | msr vbar_el1, x8 // vector table address | |
425 | isb | |
426 | ||
2a803c4d MR |
427 | // Clear BSS |
428 | adr_l x0, __bss_start | |
429 | mov x1, xzr | |
430 | adr_l x2, __bss_stop | |
431 | sub x2, x2, x0 | |
432 | bl __pi_memset | |
5227cfa7 | 433 | dsb ishst // Make zero page visible to PTW |
2a803c4d | 434 | |
a871d354 | 435 | adr_l sp, initial_sp, x4 |
6cdf9c7c JL |
436 | mov x4, sp |
437 | and x4, x4, #~(THREAD_SIZE - 1) | |
438 | msr sp_el0, x4 // Save thread_info | |
a871d354 | 439 | str_l x21, __fdt_pointer, x5 // Save FDT pointer |
a7f8de16 | 440 | |
f80fb3a3 | 441 | ldr_l x4, kimage_vaddr // Save the offset between |
a7f8de16 AB |
442 | sub x4, x4, x24 // the kernel virtual and |
443 | str_l x4, kimage_voffset, x5 // physical mappings | |
444 | ||
034edabe | 445 | mov x29, #0 |
39d114dd AR |
446 | #ifdef CONFIG_KASAN |
447 | bl kasan_early_init | |
f80fb3a3 AB |
448 | #endif |
449 | #ifdef CONFIG_RANDOMIZE_BASE | |
08cdac61 AB |
450 | tst x23, ~(MIN_KIMG_ALIGN - 1) // already running randomized? |
451 | b.ne 0f | |
f80fb3a3 | 452 | mov x0, x21 // pass FDT address in x0 |
08cdac61 | 453 | mov x1, x23 // pass modulo offset in x1 |
f80fb3a3 AB |
454 | bl kaslr_early_init // parse FDT for KASLR options |
455 | cbz x0, 0f // KASLR disabled? just proceed | |
08cdac61 | 456 | orr x23, x23, x0 // record KASLR offset |
f80fb3a3 AB |
457 | ret x28 // we must enable KASLR, return |
458 | // to __enable_mmu() | |
459 | 0: | |
39d114dd | 460 | #endif |
034edabe | 461 | b start_kernel |
0cd3defe | 462 | ENDPROC(__primary_switched) |
034edabe LA |
463 | |
464 | /* | |
465 | * end early head section, begin head code that is also used for | |
466 | * hotplug and needs to have the same protections as the text region | |
467 | */ | |
468 | .section ".text","ax" | |
f80fb3a3 AB |
469 | |
470 | ENTRY(kimage_vaddr) | |
471 | .quad _text - TEXT_OFFSET | |
472 | ||
9703d9d7 CM |
473 | /* |
474 | * If we're fortunate enough to boot at EL2, ensure that the world is | |
475 | * sane before dropping to EL1. | |
828e9834 ML |
476 | * |
477 | * Returns either BOOT_CPU_MODE_EL1 or BOOT_CPU_MODE_EL2 in x20 if | |
478 | * booted in EL1 or EL2 respectively. | |
9703d9d7 CM |
479 | */ |
480 | ENTRY(el2_setup) | |
481 | mrs x0, CurrentEL | |
974c8e45 | 482 | cmp x0, #CurrentEL_EL2 |
9cf71728 ML |
483 | b.ne 1f |
484 | mrs x0, sctlr_el2 | |
485 | CPU_BE( orr x0, x0, #(1 << 25) ) // Set the EE bit for EL2 | |
486 | CPU_LE( bic x0, x0, #(1 << 25) ) // Clear the EE bit for EL2 | |
487 | msr sctlr_el2, x0 | |
488 | b 2f | |
489 | 1: mrs x0, sctlr_el1 | |
490 | CPU_BE( orr x0, x0, #(3 << 24) ) // Set the EE and E0E bits for EL1 | |
491 | CPU_LE( bic x0, x0, #(3 << 24) ) // Clear the EE and E0E bits for EL1 | |
492 | msr sctlr_el1, x0 | |
828e9834 | 493 | mov w20, #BOOT_CPU_MODE_EL1 // This cpu booted in EL1 |
9cf71728 | 494 | isb |
9703d9d7 CM |
495 | ret |
496 | ||
1f364c8c MZ |
497 | 2: |
498 | #ifdef CONFIG_ARM64_VHE | |
499 | /* | |
500 | * Check for VHE being present. For the rest of the EL2 setup, | |
501 | * x2 being non-zero indicates that we do have VHE, and that the | |
502 | * kernel is intended to run at EL2. | |
503 | */ | |
504 | mrs x2, id_aa64mmfr1_el1 | |
505 | ubfx x2, x2, #8, #4 | |
506 | #else | |
507 | mov x2, xzr | |
508 | #endif | |
509 | ||
9703d9d7 | 510 | /* Hyp configuration. */ |
1f364c8c MZ |
511 | mov x0, #HCR_RW // 64-bit EL1 |
512 | cbz x2, set_hcr | |
513 | orr x0, x0, #HCR_TGE // Enable Host Extensions | |
514 | orr x0, x0, #HCR_E2H | |
515 | set_hcr: | |
9703d9d7 | 516 | msr hcr_el2, x0 |
1f364c8c | 517 | isb |
9703d9d7 CM |
518 | |
519 | /* Generic timers. */ | |
520 | mrs x0, cnthctl_el2 | |
521 | orr x0, x0, #3 // Enable EL1 physical timers | |
522 | msr cnthctl_el2, x0 | |
1f75ff0a | 523 | msr cntvoff_el2, xzr // Clear virtual offset |
9703d9d7 | 524 | |
021f6537 MZ |
525 | #ifdef CONFIG_ARM_GIC_V3 |
526 | /* GICv3 system register access */ | |
527 | mrs x0, id_aa64pfr0_el1 | |
528 | ubfx x0, x0, #24, #4 | |
529 | cmp x0, #1 | |
530 | b.ne 3f | |
531 | ||
72c58395 | 532 | mrs_s x0, ICC_SRE_EL2 |
021f6537 MZ |
533 | orr x0, x0, #ICC_SRE_EL2_SRE // Set ICC_SRE_EL2.SRE==1 |
534 | orr x0, x0, #ICC_SRE_EL2_ENABLE // Set ICC_SRE_EL2.Enable==1 | |
72c58395 | 535 | msr_s ICC_SRE_EL2, x0 |
021f6537 | 536 | isb // Make sure SRE is now set |
d271976d MZ |
537 | mrs_s x0, ICC_SRE_EL2 // Read SRE back, |
538 | tbz x0, #0, 3f // and check that it sticks | |
72c58395 | 539 | msr_s ICH_HCR_EL2, xzr // Reset ICC_HCR_EL2 to defaults |
021f6537 MZ |
540 | |
541 | 3: | |
542 | #endif | |
543 | ||
9703d9d7 CM |
544 | /* Populate ID registers. */ |
545 | mrs x0, midr_el1 | |
546 | mrs x1, mpidr_el1 | |
547 | msr vpidr_el2, x0 | |
548 | msr vmpidr_el2, x1 | |
549 | ||
882416c1 DM |
550 | /* |
551 | * When VHE is not in use, early init of EL2 and EL1 needs to be | |
552 | * done here. | |
553 | * When VHE _is_ in use, EL1 will not be used in the host and | |
554 | * requires no configuration, and all non-hyp-specific EL2 setup | |
555 | * will be done via the _EL1 system register aliases in __cpu_setup. | |
556 | */ | |
557 | cbnz x2, 1f | |
558 | ||
9703d9d7 CM |
559 | /* sctlr_el1 */ |
560 | mov x0, #0x0800 // Set/clear RES{1,0} bits | |
9cf71728 ML |
561 | CPU_BE( movk x0, #0x33d0, lsl #16 ) // Set EE and E0E on BE systems |
562 | CPU_LE( movk x0, #0x30d0, lsl #16 ) // Clear EE and E0E on LE systems | |
9703d9d7 CM |
563 | msr sctlr_el1, x0 |
564 | ||
565 | /* Coprocessor traps. */ | |
566 | mov x0, #0x33ff | |
567 | msr cptr_el2, x0 // Disable copro. traps to EL2 | |
882416c1 | 568 | 1: |
9703d9d7 CM |
569 | |
570 | #ifdef CONFIG_COMPAT | |
571 | msr hstr_el2, xzr // Disable CP15 traps to EL2 | |
572 | #endif | |
573 | ||
d10bcd47 | 574 | /* EL2 debug */ |
f436b2ac LP |
575 | mrs x0, id_aa64dfr0_el1 // Check ID_AA64DFR0_EL1 PMUVer |
576 | sbfx x0, x0, #8, #4 | |
577 | cmp x0, #1 | |
578 | b.lt 4f // Skip if no PMU present | |
d10bcd47 WD |
579 | mrs x0, pmcr_el0 // Disable debug access traps |
580 | ubfx x0, x0, #11, #5 // to EL2 and allow access to | |
581 | msr mdcr_el2, x0 // all PMU counters from EL1 | |
f436b2ac | 582 | 4: |
d10bcd47 | 583 | |
7dbfbe5b MZ |
584 | /* Stage-2 translation */ |
585 | msr vttbr_el2, xzr | |
586 | ||
1f364c8c MZ |
587 | cbz x2, install_el2_stub |
588 | ||
589 | mov w20, #BOOT_CPU_MODE_EL2 // This CPU booted in EL2 | |
590 | isb | |
591 | ret | |
592 | ||
593 | install_el2_stub: | |
712c6ff4 | 594 | /* Hypervisor stub */ |
ac2dec5f LA |
595 | adrp x0, __hyp_stub_vectors |
596 | add x0, x0, #:lo12:__hyp_stub_vectors | |
712c6ff4 MZ |
597 | msr vbar_el2, x0 |
598 | ||
9703d9d7 CM |
599 | /* spsr */ |
600 | mov x0, #(PSR_F_BIT | PSR_I_BIT | PSR_A_BIT | PSR_D_BIT |\ | |
601 | PSR_MODE_EL1h) | |
602 | msr spsr_el2, x0 | |
603 | msr elr_el2, lr | |
828e9834 | 604 | mov w20, #BOOT_CPU_MODE_EL2 // This CPU booted in EL2 |
9703d9d7 CM |
605 | eret |
606 | ENDPROC(el2_setup) | |
607 | ||
828e9834 ML |
608 | /* |
609 | * Sets the __boot_cpu_mode flag depending on the CPU boot mode passed | |
610 | * in x20. See arch/arm64/include/asm/virt.h for more info. | |
611 | */ | |
190c056f | 612 | set_cpu_boot_mode_flag: |
6f4d57fa | 613 | adr_l x1, __boot_cpu_mode |
828e9834 ML |
614 | cmp w20, #BOOT_CPU_MODE_EL2 |
615 | b.ne 1f | |
616 | add x1, x1, #4 | |
d0488597 WD |
617 | 1: str w20, [x1] // This CPU has booted in EL1 |
618 | dmb sy | |
619 | dc ivac, x1 // Invalidate potentially stale cache line | |
828e9834 ML |
620 | ret |
621 | ENDPROC(set_cpu_boot_mode_flag) | |
622 | ||
f35a9205 MZ |
623 | /* |
624 | * We need to find out the CPU boot mode long after boot, so we need to | |
625 | * store it in a writable variable. | |
626 | * | |
627 | * This is not in .bss, because we set it sufficiently early that the boot-time | |
628 | * zeroing of .bss would clobber it. | |
629 | */ | |
c218bca7 | 630 | .pushsection .data..cacheline_aligned |
c218bca7 | 631 | .align L1_CACHE_SHIFT |
947bb758 | 632 | ENTRY(__boot_cpu_mode) |
f35a9205 | 633 | .long BOOT_CPU_MODE_EL2 |
424a3838 | 634 | .long BOOT_CPU_MODE_EL1 |
f35a9205 MZ |
635 | .popsection |
636 | ||
9703d9d7 CM |
637 | /* |
638 | * This provides a "holding pen" for platforms to hold all secondary | |
639 | * cores are held until we're ready for them to initialise. | |
640 | */ | |
641 | ENTRY(secondary_holding_pen) | |
828e9834 | 642 | bl el2_setup // Drop to EL1, w20=cpu_boot_mode |
828e9834 | 643 | bl set_cpu_boot_mode_flag |
9703d9d7 | 644 | mrs x0, mpidr_el1 |
b03cc885 | 645 | mov_q x1, MPIDR_HWID_BITMASK |
0359b0e2 | 646 | and x0, x0, x1 |
b1c98297 | 647 | adr_l x3, secondary_holding_pen_release |
9703d9d7 CM |
648 | pen: ldr x4, [x3] |
649 | cmp x4, x0 | |
650 | b.eq secondary_startup | |
651 | wfe | |
652 | b pen | |
653 | ENDPROC(secondary_holding_pen) | |
652af899 MR |
654 | |
655 | /* | |
656 | * Secondary entry point that jumps straight into the kernel. Only to | |
657 | * be used where CPUs are brought online dynamically by the kernel. | |
658 | */ | |
659 | ENTRY(secondary_entry) | |
652af899 | 660 | bl el2_setup // Drop to EL1 |
85cc00ea | 661 | bl set_cpu_boot_mode_flag |
652af899 MR |
662 | b secondary_startup |
663 | ENDPROC(secondary_entry) | |
9703d9d7 | 664 | |
190c056f | 665 | secondary_startup: |
9703d9d7 CM |
666 | /* |
667 | * Common entry point for secondary CPUs. | |
668 | */ | |
6f4d57fa AB |
669 | adrp x25, idmap_pg_dir |
670 | adrp x26, swapper_pg_dir | |
a591ede4 | 671 | bl __cpu_setup // initialise processor |
9703d9d7 | 672 | |
e5ebeec8 | 673 | adr_l x27, __secondary_switch // address to jump to after enabling the MMU |
9703d9d7 CM |
674 | b __enable_mmu |
675 | ENDPROC(secondary_startup) | |
676 | ||
190c056f | 677 | __secondary_switched: |
2bf31a4a AB |
678 | adr_l x5, vectors |
679 | msr vbar_el1, x5 | |
680 | isb | |
681 | ||
bb905274 SP |
682 | adr_l x0, secondary_data |
683 | ldr x0, [x0, #CPU_BOOT_STACK] // get secondary_data.stack | |
9703d9d7 | 684 | mov sp, x0 |
6cdf9c7c JL |
685 | and x0, x0, #~(THREAD_SIZE - 1) |
686 | msr sp_el0, x0 // save thread_info | |
9703d9d7 CM |
687 | mov x29, #0 |
688 | b secondary_start_kernel | |
689 | ENDPROC(__secondary_switched) | |
9703d9d7 | 690 | |
bb905274 SP |
691 | /* |
692 | * The booting CPU updates the failed status @__early_cpu_boot_status, | |
693 | * with MMU turned off. | |
694 | * | |
695 | * update_early_cpu_boot_status tmp, status | |
696 | * - Corrupts tmp1, tmp2 | |
697 | * - Writes 'status' to __early_cpu_boot_status and makes sure | |
698 | * it is committed to memory. | |
699 | */ | |
700 | ||
701 | .macro update_early_cpu_boot_status status, tmp1, tmp2 | |
702 | mov \tmp2, #\status | |
adb49070 AB |
703 | adr_l \tmp1, __early_cpu_boot_status |
704 | str \tmp2, [\tmp1] | |
bb905274 SP |
705 | dmb sy |
706 | dc ivac, \tmp1 // Invalidate potentially stale cache line | |
707 | .endm | |
708 | ||
709 | .pushsection .data..cacheline_aligned | |
710 | .align L1_CACHE_SHIFT | |
711 | ENTRY(__early_cpu_boot_status) | |
712 | .long 0 | |
713 | .popsection | |
714 | ||
9703d9d7 | 715 | /* |
8b0a9575 | 716 | * Enable the MMU. |
9703d9d7 | 717 | * |
8b0a9575 AB |
718 | * x0 = SCTLR_EL1 value for turning on the MMU. |
719 | * x27 = *virtual* address to jump to upon completion | |
720 | * | |
4bf8b96e SP |
721 | * Other registers depend on the function called upon completion. |
722 | * | |
723 | * Checks if the selected granule size is supported by the CPU. | |
724 | * If it isn't, park the CPU | |
9703d9d7 | 725 | */ |
5dfe9d7d | 726 | .section ".idmap.text", "ax" |
cabe1c81 | 727 | ENTRY(__enable_mmu) |
d5e57437 | 728 | mrs x22, sctlr_el1 // preserve old SCTLR_EL1 value |
4bf8b96e SP |
729 | mrs x1, ID_AA64MMFR0_EL1 |
730 | ubfx x2, x1, #ID_AA64MMFR0_TGRAN_SHIFT, 4 | |
731 | cmp x2, #ID_AA64MMFR0_TGRAN_SUPPORTED | |
732 | b.ne __no_granule_support | |
bb905274 | 733 | update_early_cpu_boot_status 0, x1, x2 |
9703d9d7 CM |
734 | msr ttbr0_el1, x25 // load TTBR0 |
735 | msr ttbr1_el1, x26 // load TTBR1 | |
736 | isb | |
9703d9d7 CM |
737 | msr sctlr_el1, x0 |
738 | isb | |
8ec41987 WD |
739 | /* |
740 | * Invalidate the local I-cache so that any instructions fetched | |
741 | * speculatively from the PoC are discarded, since they may have | |
742 | * been dynamically patched at the PoU. | |
743 | */ | |
744 | ic iallu | |
745 | dsb nsh | |
746 | isb | |
f80fb3a3 AB |
747 | #ifdef CONFIG_RANDOMIZE_BASE |
748 | mov x19, x0 // preserve new SCTLR_EL1 value | |
749 | blr x27 | |
750 | ||
751 | /* | |
752 | * If we return here, we have a KASLR displacement in x23 which we need | |
753 | * to take into account by discarding the current kernel mapping and | |
754 | * creating a new one. | |
755 | */ | |
d5e57437 | 756 | msr sctlr_el1, x22 // disable the MMU |
f80fb3a3 AB |
757 | isb |
758 | bl __create_page_tables // recreate kernel mapping | |
759 | ||
fd363bd4 MR |
760 | tlbi vmalle1 // Remove any stale TLB entries |
761 | dsb nsh | |
762 | ||
f80fb3a3 AB |
763 | msr sctlr_el1, x19 // re-enable the MMU |
764 | isb | |
b90b4a60 MR |
765 | ic iallu // flush instructions fetched |
766 | dsb nsh // via old mapping | |
767 | isb | |
f80fb3a3 | 768 | #endif |
9703d9d7 | 769 | br x27 |
8b0a9575 | 770 | ENDPROC(__enable_mmu) |
4bf8b96e SP |
771 | |
772 | __no_granule_support: | |
bb905274 SP |
773 | /* Indicate that this CPU can't boot and is stuck in the kernel */ |
774 | update_early_cpu_boot_status CPU_STUCK_IN_KERNEL, x1, x2 | |
775 | 1: | |
4bf8b96e | 776 | wfe |
bb905274 SP |
777 | wfi |
778 | b 1b | |
4bf8b96e | 779 | ENDPROC(__no_granule_support) |
e5ebeec8 | 780 | |
0cd3defe AB |
781 | __primary_switch: |
782 | #ifdef CONFIG_RELOCATABLE | |
783 | /* | |
784 | * Iterate over each entry in the relocation table, and apply the | |
785 | * relocations in place. | |
786 | */ | |
0cd3defe AB |
787 | ldr w9, =__rela_offset // offset to reloc table |
788 | ldr w10, =__rela_size // size of reloc table | |
789 | ||
b03cc885 | 790 | mov_q x11, KIMAGE_VADDR // default virtual offset |
0cd3defe | 791 | add x11, x11, x23 // actual virtual offset |
0cd3defe AB |
792 | add x9, x9, x11 // __va(.rela) |
793 | add x10, x9, x10 // __va(.rela) + sizeof(.rela) | |
794 | ||
795 | 0: cmp x9, x10 | |
08cc55b2 | 796 | b.hs 1f |
0cd3defe AB |
797 | ldp x11, x12, [x9], #24 |
798 | ldr x13, [x9, #-8] | |
799 | cmp w12, #R_AARCH64_RELATIVE | |
08cc55b2 | 800 | b.ne 0b |
0cd3defe AB |
801 | add x13, x13, x23 // relocate |
802 | str x13, [x11, x23] | |
803 | b 0b | |
804 | ||
08cc55b2 | 805 | 1: |
0cd3defe AB |
806 | #endif |
807 | ldr x8, =__primary_switched | |
808 | br x8 | |
809 | ENDPROC(__primary_switch) | |
810 | ||
e5ebeec8 AB |
811 | __secondary_switch: |
812 | ldr x8, =__secondary_switched | |
813 | br x8 | |
814 | ENDPROC(__secondary_switch) |