Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* -*- linux-c -*- |
2 | * APM BIOS driver for Linux | |
3 | * Copyright 1994-2001 Stephen Rothwell (sfr@canb.auug.org.au) | |
4 | * | |
5 | * Initial development of this driver was funded by NEC Australia P/L | |
6 | * and NEC Corporation | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or modify it | |
9 | * under the terms of the GNU General Public License as published by the | |
10 | * Free Software Foundation; either version 2, or (at your option) any | |
11 | * later version. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, but | |
14 | * WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
16 | * General Public License for more details. | |
17 | * | |
18 | * October 1995, Rik Faith (faith@cs.unc.edu): | |
19 | * Minor enhancements and updates (to the patch set) for 1.3.x | |
20 | * Documentation | |
21 | * January 1996, Rik Faith (faith@cs.unc.edu): | |
22 | * Make /proc/apm easy to format (bump driver version) | |
23 | * March 1996, Rik Faith (faith@cs.unc.edu): | |
24 | * Prohibit APM BIOS calls unless apm_enabled. | |
25 | * (Thanks to Ulrich Windl <Ulrich.Windl@rz.uni-regensburg.de>) | |
26 | * April 1996, Stephen Rothwell (sfr@canb.auug.org.au) | |
27 | * Version 1.0 and 1.1 | |
28 | * May 1996, Version 1.2 | |
29 | * Feb 1998, Version 1.3 | |
30 | * Feb 1998, Version 1.4 | |
31 | * Aug 1998, Version 1.5 | |
32 | * Sep 1998, Version 1.6 | |
33 | * Nov 1998, Version 1.7 | |
34 | * Jan 1999, Version 1.8 | |
35 | * Jan 1999, Version 1.9 | |
36 | * Oct 1999, Version 1.10 | |
37 | * Nov 1999, Version 1.11 | |
38 | * Jan 2000, Version 1.12 | |
39 | * Feb 2000, Version 1.13 | |
40 | * Nov 2000, Version 1.14 | |
41 | * Oct 2001, Version 1.15 | |
42 | * Jan 2002, Version 1.16 | |
43 | * Oct 2002, Version 1.16ac | |
44 | * | |
45 | * History: | |
46 | * 0.6b: first version in official kernel, Linux 1.3.46 | |
47 | * 0.7: changed /proc/apm format, Linux 1.3.58 | |
48 | * 0.8: fixed gcc 2.7.[12] compilation problems, Linux 1.3.59 | |
49 | * 0.9: only call bios if bios is present, Linux 1.3.72 | |
50 | * 1.0: use fixed device number, consolidate /proc/apm into this file, | |
51 | * Linux 1.3.85 | |
52 | * 1.1: support user-space standby and suspend, power off after system | |
53 | * halted, Linux 1.3.98 | |
54 | * 1.2: When resetting RTC after resume, take care so that the time | |
55 | * is only incorrect by 30-60mS (vs. 1S previously) (Gabor J. Toth | |
56 | * <jtoth@princeton.edu>); improve interaction between | |
57 | * screen-blanking and gpm (Stephen Rothwell); Linux 1.99.4 | |
58 | * 1.2a:Simple change to stop mysterious bug reports with SMP also added | |
59 | * levels to the printk calls. APM is not defined for SMP machines. | |
60 | * The new replacment for it is, but Linux doesn't yet support this. | |
61 | * Alan Cox Linux 2.1.55 | |
62 | * 1.3: Set up a valid data descriptor 0x40 for buggy BIOS's | |
63 | * 1.4: Upgraded to support APM 1.2. Integrated ThinkPad suspend patch by | |
64 | * Dean Gaudet <dgaudet@arctic.org>. | |
65 | * C. Scott Ananian <cananian@alumni.princeton.edu> Linux 2.1.87 | |
66 | * 1.5: Fix segment register reloading (in case of bad segments saved | |
67 | * across BIOS call). | |
68 | * Stephen Rothwell | |
69 | * 1.6: Cope with complier/assembler differences. | |
70 | * Only try to turn off the first display device. | |
71 | * Fix OOPS at power off with no APM BIOS by Jan Echternach | |
72 | * <echter@informatik.uni-rostock.de> | |
73 | * Stephen Rothwell | |
74 | * 1.7: Modify driver's cached copy of the disabled/disengaged flags | |
75 | * to reflect current state of APM BIOS. | |
76 | * Chris Rankin <rankinc@bellsouth.net> | |
77 | * Reset interrupt 0 timer to 100Hz after suspend | |
78 | * Chad Miller <cmiller@surfsouth.com> | |
79 | * Add CONFIG_APM_IGNORE_SUSPEND_BOUNCE | |
80 | * Richard Gooch <rgooch@atnf.csiro.au> | |
81 | * Allow boot time disabling of APM | |
82 | * Make boot messages far less verbose by default | |
83 | * Make asm safer | |
84 | * Stephen Rothwell | |
85 | * 1.8: Add CONFIG_APM_RTC_IS_GMT | |
86 | * Richard Gooch <rgooch@atnf.csiro.au> | |
87 | * change APM_NOINTS to CONFIG_APM_ALLOW_INTS | |
88 | * remove dependency on CONFIG_PROC_FS | |
89 | * Stephen Rothwell | |
90 | * 1.9: Fix small typo. <laslo@wodip.opole.pl> | |
91 | * Try to cope with BIOS's that need to have all display | |
92 | * devices blanked and not just the first one. | |
93 | * Ross Paterson <ross@soi.city.ac.uk> | |
94 | * Fix segment limit setting it has always been wrong as | |
95 | * the segments needed to have byte granularity. | |
96 | * Mark a few things __init. | |
97 | * Add hack to allow power off of SMP systems by popular request. | |
98 | * Use CONFIG_SMP instead of __SMP__ | |
99 | * Ignore BOUNCES for three seconds. | |
100 | * Stephen Rothwell | |
101 | * 1.10: Fix for Thinkpad return code. | |
102 | * Merge 2.2 and 2.3 drivers. | |
103 | * Remove APM dependencies in arch/i386/kernel/process.c | |
104 | * Remove APM dependencies in drivers/char/sysrq.c | |
105 | * Reset time across standby. | |
106 | * Allow more inititialisation on SMP. | |
107 | * Remove CONFIG_APM_POWER_OFF and make it boot time | |
108 | * configurable (default on). | |
109 | * Make debug only a boot time parameter (remove APM_DEBUG). | |
110 | * Try to blank all devices on any error. | |
111 | * 1.11: Remove APM dependencies in drivers/char/console.c | |
112 | * Check nr_running to detect if we are idle (from | |
113 | * Borislav Deianov <borislav@lix.polytechnique.fr>) | |
114 | * Fix for bioses that don't zero the top part of the | |
115 | * entrypoint offset (Mario Sitta <sitta@al.unipmn.it>) | |
116 | * (reported by Panos Katsaloulis <teras@writeme.com>). | |
117 | * Real mode power off patch (Walter Hofmann | |
118 | * <Walter.Hofmann@physik.stud.uni-erlangen.de>). | |
119 | * 1.12: Remove CONFIG_SMP as the compiler will optimize | |
120 | * the code away anyway (smp_num_cpus == 1 in UP) | |
121 | * noted by Artur Skawina <skawina@geocities.com>. | |
122 | * Make power off under SMP work again. | |
123 | * Fix thinko with initial engaging of BIOS. | |
124 | * Make sure power off only happens on CPU 0 | |
125 | * (Paul "Rusty" Russell <rusty@rustcorp.com.au>). | |
126 | * Do error notification to user mode if BIOS calls fail. | |
127 | * Move entrypoint offset fix to ...boot/setup.S | |
128 | * where it belongs (Cosmos <gis88564@cis.nctu.edu.tw>). | |
129 | * Remove smp-power-off. SMP users must now specify | |
130 | * "apm=power-off" on the kernel command line. Suggested | |
131 | * by Jim Avera <jima@hal.com>, modified by Alan Cox | |
132 | * <alan@lxorguk.ukuu.org.uk>. | |
133 | * Register the /proc/apm entry even on SMP so that | |
134 | * scripts that check for it before doing power off | |
135 | * work (Jim Avera <jima@hal.com>). | |
136 | * 1.13: Changes for new pm_ interfaces (Andy Henroid | |
137 | * <andy_henroid@yahoo.com>). | |
138 | * Modularize the code. | |
139 | * Fix the Thinkpad (again) :-( (CONFIG_APM_IGNORE_MULTIPLE_SUSPENDS | |
140 | * is now the way life works). | |
141 | * Fix thinko in suspend() (wrong return). | |
142 | * Notify drivers on critical suspend. | |
143 | * Make kapmd absorb more idle time (Pavel Machek <pavel@suse.cz> | |
144 | * modified by sfr). | |
145 | * Disable interrupts while we are suspended (Andy Henroid | |
146 | * <andy_henroid@yahoo.com> fixed by sfr). | |
147 | * Make power off work on SMP again (Tony Hoyle | |
148 | * <tmh@magenta-logic.com> and <zlatko@iskon.hr>) modified by sfr. | |
149 | * Remove CONFIG_APM_SUSPEND_BOUNCE. The bounce ignore | |
150 | * interval is now configurable. | |
151 | * 1.14: Make connection version persist across module unload/load. | |
152 | * Enable and engage power management earlier. | |
153 | * Disengage power management on module unload. | |
154 | * Changed to use the sysrq-register hack for registering the | |
155 | * power off function called by magic sysrq based upon discussions | |
156 | * in irc://irc.openprojects.net/#kernelnewbies | |
157 | * (Crutcher Dunnavant <crutcher+kernel@datastacks.com>). | |
158 | * Make CONFIG_APM_REAL_MODE_POWER_OFF run time configurable. | |
159 | * (Arjan van de Ven <arjanv@redhat.com>) modified by sfr. | |
160 | * Work around byte swap bug in one of the Vaio's BIOS's | |
161 | * (Marc Boucher <marc@mbsi.ca>). | |
162 | * Exposed the disable flag to dmi so that we can handle known | |
163 | * broken APM (Alan Cox <alan@redhat.com>). | |
164 | * 1.14ac: If the BIOS says "I slowed the CPU down" then don't spin | |
165 | * calling it - instead idle. (Alan Cox <alan@redhat.com>) | |
166 | * If an APM idle fails log it and idle sensibly | |
167 | * 1.15: Don't queue events to clients who open the device O_WRONLY. | |
168 | * Don't expect replies from clients who open the device O_RDONLY. | |
169 | * (Idea from Thomas Hood) | |
170 | * Minor waitqueue cleanups. (John Fremlin <chief@bandits.org>) | |
171 | * 1.16: Fix idle calling. (Andreas Steinmetz <ast@domdv.de> et al.) | |
172 | * Notify listeners of standby or suspend events before notifying | |
173 | * drivers. Return EBUSY to ioctl() if suspend is rejected. | |
174 | * (Russell King <rmk@arm.linux.org.uk> and Thomas Hood) | |
175 | * Ignore first resume after we generate our own resume event | |
176 | * after a suspend (Thomas Hood) | |
177 | * Daemonize now gets rid of our controlling terminal (sfr). | |
178 | * CONFIG_APM_CPU_IDLE now just affects the default value of | |
179 | * idle_threshold (sfr). | |
180 | * Change name of kernel apm daemon (as it no longer idles) (sfr). | |
181 | * 1.16ac: Fix up SMP support somewhat. You can now force SMP on and we | |
182 | * make _all_ APM calls on the CPU#0. Fix unsafe sign bug. | |
183 | * TODO: determine if its "boot CPU" or "CPU0" we want to lock to. | |
184 | * | |
185 | * APM 1.1 Reference: | |
186 | * | |
187 | * Intel Corporation, Microsoft Corporation. Advanced Power Management | |
188 | * (APM) BIOS Interface Specification, Revision 1.1, September 1993. | |
189 | * Intel Order Number 241704-001. Microsoft Part Number 781-110-X01. | |
190 | * | |
191 | * [This document is available free from Intel by calling 800.628.8686 (fax | |
192 | * 916.356.6100) or 800.548.4725; or via anonymous ftp from | |
193 | * ftp://ftp.intel.com/pub/IAL/software_specs/apmv11.doc. It is also | |
194 | * available from Microsoft by calling 206.882.8080.] | |
195 | * | |
196 | * APM 1.2 Reference: | |
197 | * Intel Corporation, Microsoft Corporation. Advanced Power Management | |
198 | * (APM) BIOS Interface Specification, Revision 1.2, February 1996. | |
199 | * | |
200 | * [This document is available from Microsoft at: | |
201 | * http://www.microsoft.com/hwdev/busbios/amp_12.htm] | |
202 | */ | |
203 | ||
204 | #include <linux/config.h> | |
205 | #include <linux/module.h> | |
206 | ||
207 | #include <linux/poll.h> | |
208 | #include <linux/types.h> | |
209 | #include <linux/stddef.h> | |
210 | #include <linux/timer.h> | |
211 | #include <linux/fcntl.h> | |
212 | #include <linux/slab.h> | |
213 | #include <linux/stat.h> | |
214 | #include <linux/proc_fs.h> | |
215 | #include <linux/miscdevice.h> | |
216 | #include <linux/apm_bios.h> | |
217 | #include <linux/init.h> | |
218 | #include <linux/time.h> | |
219 | #include <linux/sched.h> | |
220 | #include <linux/pm.h> | |
bca73e4b | 221 | #include <linux/pm_legacy.h> |
1da177e4 LT |
222 | #include <linux/device.h> |
223 | #include <linux/kernel.h> | |
224 | #include <linux/smp.h> | |
225 | #include <linux/smp_lock.h> | |
226 | #include <linux/dmi.h> | |
227 | #include <linux/suspend.h> | |
228 | ||
229 | #include <asm/system.h> | |
230 | #include <asm/uaccess.h> | |
231 | #include <asm/desc.h> | |
306e440d | 232 | #include <asm/i8253.h> |
1da177e4 LT |
233 | |
234 | #include "io_ports.h" | |
235 | ||
1da177e4 LT |
236 | extern unsigned long get_cmos_time(void); |
237 | extern void machine_real_restart(unsigned char *, int); | |
238 | ||
239 | #if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT) | |
240 | extern int (*console_blank_hook)(int); | |
241 | #endif | |
242 | ||
243 | /* | |
244 | * The apm_bios device is one of the misc char devices. | |
245 | * This is its minor number. | |
246 | */ | |
247 | #define APM_MINOR_DEV 134 | |
248 | ||
249 | /* | |
250 | * See Documentation/Config.help for the configuration options. | |
251 | * | |
252 | * Various options can be changed at boot time as follows: | |
253 | * (We allow underscores for compatibility with the modules code) | |
254 | * apm=on/off enable/disable APM | |
255 | * [no-]allow[-_]ints allow interrupts during BIOS calls | |
256 | * [no-]broken[-_]psr BIOS has a broken GetPowerStatus call | |
257 | * [no-]realmode[-_]power[-_]off switch to real mode before | |
258 | * powering off | |
259 | * [no-]debug log some debugging messages | |
260 | * [no-]power[-_]off power off on shutdown | |
261 | * [no-]smp Use apm even on an SMP box | |
262 | * bounce[-_]interval=<n> number of ticks to ignore suspend | |
263 | * bounces | |
264 | * idle[-_]threshold=<n> System idle percentage above which to | |
265 | * make APM BIOS idle calls. Set it to | |
266 | * 100 to disable. | |
267 | * idle[-_]period=<n> Period (in 1/100s of a second) over | |
268 | * which the idle percentage is | |
269 | * calculated. | |
270 | */ | |
271 | ||
272 | /* KNOWN PROBLEM MACHINES: | |
273 | * | |
274 | * U: TI 4000M TravelMate: BIOS is *NOT* APM compliant | |
275 | * [Confirmed by TI representative] | |
276 | * ?: ACER 486DX4/75: uses dseg 0040, in violation of APM specification | |
277 | * [Confirmed by BIOS disassembly] | |
278 | * [This may work now ...] | |
279 | * P: Toshiba 1950S: battery life information only gets updated after resume | |
280 | * P: Midwest Micro Soundbook Elite DX2/66 monochrome: screen blanking | |
281 | * broken in BIOS [Reported by Garst R. Reese <reese@isn.net>] | |
282 | * ?: AcerNote-950: oops on reading /proc/apm - workaround is a WIP | |
283 | * Neale Banks <neale@lowendale.com.au> December 2000 | |
284 | * | |
285 | * Legend: U = unusable with APM patches | |
286 | * P = partially usable with APM patches | |
287 | */ | |
288 | ||
289 | /* | |
290 | * Define as 1 to make the driver always call the APM BIOS busy | |
291 | * routine even if the clock was not reported as slowed by the | |
292 | * idle routine. Otherwise, define as 0. | |
293 | */ | |
294 | #define ALWAYS_CALL_BUSY 1 | |
295 | ||
296 | /* | |
297 | * Define to make the APM BIOS calls zero all data segment registers (so | |
298 | * that an incorrect BIOS implementation will cause a kernel panic if it | |
299 | * tries to write to arbitrary memory). | |
300 | */ | |
301 | #define APM_ZERO_SEGS | |
302 | ||
303 | #include "apm.h" | |
304 | ||
305 | /* | |
306 | * Define to make all _set_limit calls use 64k limits. The APM 1.1 BIOS is | |
307 | * supposed to provide limit information that it recognizes. Many machines | |
308 | * do this correctly, but many others do not restrict themselves to their | |
309 | * claimed limit. When this happens, they will cause a segmentation | |
310 | * violation in the kernel at boot time. Most BIOS's, however, will | |
311 | * respect a 64k limit, so we use that. If you want to be pedantic and | |
312 | * hold your BIOS to its claims, then undefine this. | |
313 | */ | |
314 | #define APM_RELAX_SEGMENTS | |
315 | ||
316 | /* | |
317 | * Define to re-initialize the interrupt 0 timer to 100 Hz after a suspend. | |
318 | * This patched by Chad Miller <cmiller@surfsouth.com>, original code by | |
319 | * David Chen <chen@ctpa04.mit.edu> | |
320 | */ | |
321 | #undef INIT_TIMER_AFTER_SUSPEND | |
322 | ||
323 | #ifdef INIT_TIMER_AFTER_SUSPEND | |
324 | #include <linux/timex.h> | |
325 | #include <asm/io.h> | |
326 | #include <linux/delay.h> | |
327 | #endif | |
328 | ||
329 | /* | |
330 | * Need to poll the APM BIOS every second | |
331 | */ | |
332 | #define APM_CHECK_TIMEOUT (HZ) | |
333 | ||
334 | /* | |
335 | * Ignore suspend events for this amount of time after a resume | |
336 | */ | |
337 | #define DEFAULT_BOUNCE_INTERVAL (3 * HZ) | |
338 | ||
339 | /* | |
340 | * Maximum number of events stored | |
341 | */ | |
342 | #define APM_MAX_EVENTS 20 | |
343 | ||
344 | /* | |
345 | * The per-file APM data | |
346 | */ | |
347 | struct apm_user { | |
348 | int magic; | |
349 | struct apm_user * next; | |
77617bd8 DP |
350 | unsigned int suser: 1; |
351 | unsigned int writer: 1; | |
352 | unsigned int reader: 1; | |
353 | unsigned int suspend_wait: 1; | |
1da177e4 LT |
354 | int suspend_result; |
355 | int suspends_pending; | |
356 | int standbys_pending; | |
357 | int suspends_read; | |
358 | int standbys_read; | |
359 | int event_head; | |
360 | int event_tail; | |
361 | apm_event_t events[APM_MAX_EVENTS]; | |
362 | }; | |
363 | ||
364 | /* | |
365 | * The magic number in apm_user | |
366 | */ | |
367 | #define APM_BIOS_MAGIC 0x4101 | |
368 | ||
369 | /* | |
370 | * idle percentage above which bios idle calls are done | |
371 | */ | |
372 | #ifdef CONFIG_APM_CPU_IDLE | |
373 | #define DEFAULT_IDLE_THRESHOLD 95 | |
374 | #else | |
375 | #define DEFAULT_IDLE_THRESHOLD 100 | |
376 | #endif | |
377 | #define DEFAULT_IDLE_PERIOD (100 / 3) | |
378 | ||
379 | /* | |
380 | * Local variables | |
381 | */ | |
382 | static struct { | |
383 | unsigned long offset; | |
384 | unsigned short segment; | |
385 | } apm_bios_entry; | |
386 | static int clock_slowed; | |
387 | static int idle_threshold = DEFAULT_IDLE_THRESHOLD; | |
388 | static int idle_period = DEFAULT_IDLE_PERIOD; | |
389 | static int set_pm_idle; | |
390 | static int suspends_pending; | |
391 | static int standbys_pending; | |
392 | static int ignore_sys_suspend; | |
393 | static int ignore_normal_resume; | |
394 | static int bounce_interval = DEFAULT_BOUNCE_INTERVAL; | |
395 | ||
396 | #ifdef CONFIG_APM_RTC_IS_GMT | |
397 | # define clock_cmos_diff 0 | |
398 | # define got_clock_diff 1 | |
399 | #else | |
400 | static long clock_cmos_diff; | |
401 | static int got_clock_diff; | |
402 | #endif | |
403 | static int debug; | |
404 | static int smp; | |
405 | static int apm_disabled = -1; | |
406 | #ifdef CONFIG_SMP | |
407 | static int power_off; | |
408 | #else | |
409 | static int power_off = 1; | |
410 | #endif | |
411 | #ifdef CONFIG_APM_REAL_MODE_POWER_OFF | |
412 | static int realmode_power_off = 1; | |
413 | #else | |
414 | static int realmode_power_off; | |
415 | #endif | |
416 | static int exit_kapmd; | |
417 | static int kapmd_running; | |
418 | #ifdef CONFIG_APM_ALLOW_INTS | |
419 | static int allow_ints = 1; | |
420 | #else | |
421 | static int allow_ints; | |
422 | #endif | |
423 | static int broken_psr; | |
424 | ||
425 | static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue); | |
426 | static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue); | |
427 | static struct apm_user * user_list; | |
428 | static DEFINE_SPINLOCK(user_list_lock); | |
429 | static struct desc_struct bad_bios_desc = { 0, 0x00409200 }; | |
430 | ||
431 | static char driver_version[] = "1.16ac"; /* no spaces */ | |
432 | ||
433 | /* | |
434 | * APM event names taken from the APM 1.2 specification. These are | |
435 | * the message codes that the BIOS uses to tell us about events | |
436 | */ | |
437 | static char * apm_event_name[] = { | |
438 | "system standby", | |
439 | "system suspend", | |
440 | "normal resume", | |
441 | "critical resume", | |
442 | "low battery", | |
443 | "power status change", | |
444 | "update time", | |
445 | "critical suspend", | |
446 | "user standby", | |
447 | "user suspend", | |
448 | "system standby resume", | |
449 | "capabilities change" | |
450 | }; | |
38e548ee | 451 | #define NR_APM_EVENT_NAME ARRAY_SIZE(apm_event_name) |
1da177e4 LT |
452 | |
453 | typedef struct lookup_t { | |
454 | int key; | |
455 | char * msg; | |
456 | } lookup_t; | |
457 | ||
458 | /* | |
459 | * The BIOS returns a set of standard error codes in AX when the | |
460 | * carry flag is set. | |
461 | */ | |
462 | ||
463 | static const lookup_t error_table[] = { | |
464 | /* N/A { APM_SUCCESS, "Operation succeeded" }, */ | |
465 | { APM_DISABLED, "Power management disabled" }, | |
466 | { APM_CONNECTED, "Real mode interface already connected" }, | |
467 | { APM_NOT_CONNECTED, "Interface not connected" }, | |
468 | { APM_16_CONNECTED, "16 bit interface already connected" }, | |
469 | /* N/A { APM_16_UNSUPPORTED, "16 bit interface not supported" }, */ | |
470 | { APM_32_CONNECTED, "32 bit interface already connected" }, | |
471 | { APM_32_UNSUPPORTED, "32 bit interface not supported" }, | |
472 | { APM_BAD_DEVICE, "Unrecognized device ID" }, | |
473 | { APM_BAD_PARAM, "Parameter out of range" }, | |
474 | { APM_NOT_ENGAGED, "Interface not engaged" }, | |
475 | { APM_BAD_FUNCTION, "Function not supported" }, | |
476 | { APM_RESUME_DISABLED, "Resume timer disabled" }, | |
477 | { APM_BAD_STATE, "Unable to enter requested state" }, | |
478 | /* N/A { APM_NO_EVENTS, "No events pending" }, */ | |
479 | { APM_NO_ERROR, "BIOS did not set a return code" }, | |
480 | { APM_NOT_PRESENT, "No APM present" } | |
481 | }; | |
38e548ee | 482 | #define ERROR_COUNT ARRAY_SIZE(error_table) |
1da177e4 LT |
483 | |
484 | /** | |
485 | * apm_error - display an APM error | |
486 | * @str: information string | |
487 | * @err: APM BIOS return code | |
488 | * | |
489 | * Write a meaningful log entry to the kernel log in the event of | |
490 | * an APM error. | |
491 | */ | |
492 | ||
493 | static void apm_error(char *str, int err) | |
494 | { | |
495 | int i; | |
496 | ||
497 | for (i = 0; i < ERROR_COUNT; i++) | |
498 | if (error_table[i].key == err) break; | |
499 | if (i < ERROR_COUNT) | |
500 | printk(KERN_NOTICE "apm: %s: %s\n", str, error_table[i].msg); | |
501 | else | |
502 | printk(KERN_NOTICE "apm: %s: unknown error code %#2.2x\n", | |
503 | str, err); | |
504 | } | |
505 | ||
506 | /* | |
507 | * Lock APM functionality to physical CPU 0 | |
508 | */ | |
509 | ||
510 | #ifdef CONFIG_SMP | |
511 | ||
512 | static cpumask_t apm_save_cpus(void) | |
513 | { | |
514 | cpumask_t x = current->cpus_allowed; | |
515 | /* Some bioses don't like being called from CPU != 0 */ | |
516 | set_cpus_allowed(current, cpumask_of_cpu(0)); | |
517 | BUG_ON(smp_processor_id() != 0); | |
518 | return x; | |
519 | } | |
520 | ||
521 | static inline void apm_restore_cpus(cpumask_t mask) | |
522 | { | |
523 | set_cpus_allowed(current, mask); | |
524 | } | |
525 | ||
526 | #else | |
527 | ||
528 | /* | |
529 | * No CPU lockdown needed on a uniprocessor | |
530 | */ | |
531 | ||
532 | #define apm_save_cpus() (current->cpus_allowed) | |
533 | #define apm_restore_cpus(x) (void)(x) | |
534 | ||
535 | #endif | |
536 | ||
537 | /* | |
538 | * These are the actual BIOS calls. Depending on APM_ZERO_SEGS and | |
539 | * apm_info.allow_ints, we are being really paranoid here! Not only | |
540 | * are interrupts disabled, but all the segment registers (except SS) | |
541 | * are saved and zeroed this means that if the BIOS tries to reference | |
542 | * any data without explicitly loading the segment registers, the kernel | |
543 | * will fault immediately rather than have some unforeseen circumstances | |
544 | * for the rest of the kernel. And it will be very obvious! :-) Doing | |
545 | * this depends on CS referring to the same physical memory as DS so that | |
546 | * DS can be zeroed before the call. Unfortunately, we can't do anything | |
547 | * about the stack segment/pointer. Also, we tell the compiler that | |
548 | * everything could change. | |
549 | * | |
550 | * Also, we KNOW that for the non error case of apm_bios_call, there | |
551 | * is no useful data returned in the low order 8 bits of eax. | |
552 | */ | |
553 | #define APM_DO_CLI \ | |
554 | if (apm_info.allow_ints) \ | |
555 | local_irq_enable(); \ | |
556 | else \ | |
557 | local_irq_disable(); | |
558 | ||
559 | #ifdef APM_ZERO_SEGS | |
560 | # define APM_DECL_SEGS \ | |
561 | unsigned int saved_fs; unsigned int saved_gs; | |
562 | # define APM_DO_SAVE_SEGS \ | |
563 | savesegment(fs, saved_fs); savesegment(gs, saved_gs) | |
564 | # define APM_DO_RESTORE_SEGS \ | |
565 | loadsegment(fs, saved_fs); loadsegment(gs, saved_gs) | |
566 | #else | |
567 | # define APM_DECL_SEGS | |
568 | # define APM_DO_SAVE_SEGS | |
569 | # define APM_DO_RESTORE_SEGS | |
570 | #endif | |
571 | ||
572 | /** | |
573 | * apm_bios_call - Make an APM BIOS 32bit call | |
574 | * @func: APM function to execute | |
575 | * @ebx_in: EBX register for call entry | |
576 | * @ecx_in: ECX register for call entry | |
577 | * @eax: EAX register return | |
578 | * @ebx: EBX register return | |
579 | * @ecx: ECX register return | |
580 | * @edx: EDX register return | |
581 | * @esi: ESI register return | |
582 | * | |
583 | * Make an APM call using the 32bit protected mode interface. The | |
584 | * caller is responsible for knowing if APM BIOS is configured and | |
585 | * enabled. This call can disable interrupts for a long period of | |
586 | * time on some laptops. The return value is in AH and the carry | |
587 | * flag is loaded into AL. If there is an error, then the error | |
588 | * code is returned in AH (bits 8-15 of eax) and this function | |
589 | * returns non-zero. | |
590 | */ | |
591 | ||
592 | static u8 apm_bios_call(u32 func, u32 ebx_in, u32 ecx_in, | |
593 | u32 *eax, u32 *ebx, u32 *ecx, u32 *edx, u32 *esi) | |
594 | { | |
595 | APM_DECL_SEGS | |
596 | unsigned long flags; | |
597 | cpumask_t cpus; | |
598 | int cpu; | |
599 | struct desc_struct save_desc_40; | |
251e6912 | 600 | struct desc_struct *gdt; |
1da177e4 LT |
601 | |
602 | cpus = apm_save_cpus(); | |
603 | ||
604 | cpu = get_cpu(); | |
251e6912 ZA |
605 | gdt = get_cpu_gdt_table(cpu); |
606 | save_desc_40 = gdt[0x40 / 8]; | |
607 | gdt[0x40 / 8] = bad_bios_desc; | |
1da177e4 LT |
608 | |
609 | local_save_flags(flags); | |
610 | APM_DO_CLI; | |
611 | APM_DO_SAVE_SEGS; | |
612 | apm_bios_call_asm(func, ebx_in, ecx_in, eax, ebx, ecx, edx, esi); | |
613 | APM_DO_RESTORE_SEGS; | |
614 | local_irq_restore(flags); | |
251e6912 | 615 | gdt[0x40 / 8] = save_desc_40; |
1da177e4 LT |
616 | put_cpu(); |
617 | apm_restore_cpus(cpus); | |
618 | ||
619 | return *eax & 0xff; | |
620 | } | |
621 | ||
622 | /** | |
623 | * apm_bios_call_simple - make a simple APM BIOS 32bit call | |
624 | * @func: APM function to invoke | |
625 | * @ebx_in: EBX register value for BIOS call | |
626 | * @ecx_in: ECX register value for BIOS call | |
627 | * @eax: EAX register on return from the BIOS call | |
628 | * | |
629 | * Make a BIOS call that does only returns one value, or just status. | |
630 | * If there is an error, then the error code is returned in AH | |
631 | * (bits 8-15 of eax) and this function returns non-zero. This is | |
632 | * used for simpler BIOS operations. This call may hold interrupts | |
633 | * off for a long time on some laptops. | |
634 | */ | |
635 | ||
636 | static u8 apm_bios_call_simple(u32 func, u32 ebx_in, u32 ecx_in, u32 *eax) | |
637 | { | |
638 | u8 error; | |
639 | APM_DECL_SEGS | |
640 | unsigned long flags; | |
641 | cpumask_t cpus; | |
642 | int cpu; | |
643 | struct desc_struct save_desc_40; | |
251e6912 | 644 | struct desc_struct *gdt; |
1da177e4 LT |
645 | |
646 | cpus = apm_save_cpus(); | |
647 | ||
648 | cpu = get_cpu(); | |
251e6912 ZA |
649 | gdt = get_cpu_gdt_table(cpu); |
650 | save_desc_40 = gdt[0x40 / 8]; | |
651 | gdt[0x40 / 8] = bad_bios_desc; | |
1da177e4 LT |
652 | |
653 | local_save_flags(flags); | |
654 | APM_DO_CLI; | |
655 | APM_DO_SAVE_SEGS; | |
656 | error = apm_bios_call_simple_asm(func, ebx_in, ecx_in, eax); | |
657 | APM_DO_RESTORE_SEGS; | |
658 | local_irq_restore(flags); | |
251e6912 | 659 | gdt[0x40 / 8] = save_desc_40; |
1da177e4 LT |
660 | put_cpu(); |
661 | apm_restore_cpus(cpus); | |
662 | return error; | |
663 | } | |
664 | ||
665 | /** | |
666 | * apm_driver_version - APM driver version | |
667 | * @val: loaded with the APM version on return | |
668 | * | |
669 | * Retrieve the APM version supported by the BIOS. This is only | |
670 | * supported for APM 1.1 or higher. An error indicates APM 1.0 is | |
671 | * probably present. | |
672 | * | |
673 | * On entry val should point to a value indicating the APM driver | |
674 | * version with the high byte being the major and the low byte the | |
675 | * minor number both in BCD | |
676 | * | |
677 | * On return it will hold the BIOS revision supported in the | |
678 | * same format. | |
679 | */ | |
680 | ||
681 | static int apm_driver_version(u_short *val) | |
682 | { | |
683 | u32 eax; | |
684 | ||
685 | if (apm_bios_call_simple(APM_FUNC_VERSION, 0, *val, &eax)) | |
686 | return (eax >> 8) & 0xff; | |
687 | *val = eax; | |
688 | return APM_SUCCESS; | |
689 | } | |
690 | ||
691 | /** | |
692 | * apm_get_event - get an APM event from the BIOS | |
693 | * @event: pointer to the event | |
694 | * @info: point to the event information | |
695 | * | |
696 | * The APM BIOS provides a polled information for event | |
697 | * reporting. The BIOS expects to be polled at least every second | |
698 | * when events are pending. When a message is found the caller should | |
699 | * poll until no more messages are present. However, this causes | |
700 | * problems on some laptops where a suspend event notification is | |
701 | * not cleared until it is acknowledged. | |
702 | * | |
703 | * Additional information is returned in the info pointer, providing | |
704 | * that APM 1.2 is in use. If no messges are pending the value 0x80 | |
705 | * is returned (No power management events pending). | |
706 | */ | |
707 | ||
708 | static int apm_get_event(apm_event_t *event, apm_eventinfo_t *info) | |
709 | { | |
710 | u32 eax; | |
711 | u32 ebx; | |
712 | u32 ecx; | |
713 | u32 dummy; | |
714 | ||
715 | if (apm_bios_call(APM_FUNC_GET_EVENT, 0, 0, &eax, &ebx, &ecx, | |
716 | &dummy, &dummy)) | |
717 | return (eax >> 8) & 0xff; | |
718 | *event = ebx; | |
719 | if (apm_info.connection_version < 0x0102) | |
720 | *info = ~0; /* indicate info not valid */ | |
721 | else | |
722 | *info = ecx; | |
723 | return APM_SUCCESS; | |
724 | } | |
725 | ||
726 | /** | |
727 | * set_power_state - set the power management state | |
728 | * @what: which items to transition | |
729 | * @state: state to transition to | |
730 | * | |
731 | * Request an APM change of state for one or more system devices. The | |
732 | * processor state must be transitioned last of all. what holds the | |
733 | * class of device in the upper byte and the device number (0xFF for | |
734 | * all) for the object to be transitioned. | |
735 | * | |
736 | * The state holds the state to transition to, which may in fact | |
737 | * be an acceptance of a BIOS requested state change. | |
738 | */ | |
739 | ||
740 | static int set_power_state(u_short what, u_short state) | |
741 | { | |
742 | u32 eax; | |
743 | ||
744 | if (apm_bios_call_simple(APM_FUNC_SET_STATE, what, state, &eax)) | |
745 | return (eax >> 8) & 0xff; | |
746 | return APM_SUCCESS; | |
747 | } | |
748 | ||
749 | /** | |
750 | * set_system_power_state - set system wide power state | |
751 | * @state: which state to enter | |
752 | * | |
753 | * Transition the entire system into a new APM power state. | |
754 | */ | |
755 | ||
756 | static int set_system_power_state(u_short state) | |
757 | { | |
758 | return set_power_state(APM_DEVICE_ALL, state); | |
759 | } | |
760 | ||
761 | /** | |
762 | * apm_do_idle - perform power saving | |
763 | * | |
764 | * This function notifies the BIOS that the processor is (in the view | |
765 | * of the OS) idle. It returns -1 in the event that the BIOS refuses | |
766 | * to handle the idle request. On a success the function returns 1 | |
767 | * if the BIOS did clock slowing or 0 otherwise. | |
768 | */ | |
769 | ||
770 | static int apm_do_idle(void) | |
771 | { | |
772 | u32 eax; | |
64c7c8f8 NP |
773 | u8 ret = 0; |
774 | int idled = 0; | |
775 | int polling; | |
776 | ||
777 | polling = test_thread_flag(TIF_POLLING_NRFLAG); | |
778 | if (polling) { | |
779 | clear_thread_flag(TIF_POLLING_NRFLAG); | |
780 | smp_mb__after_clear_bit(); | |
781 | } | |
782 | if (!need_resched()) { | |
783 | idled = 1; | |
784 | ret = apm_bios_call_simple(APM_FUNC_IDLE, 0, 0, &eax); | |
785 | } | |
786 | if (polling) | |
787 | set_thread_flag(TIF_POLLING_NRFLAG); | |
788 | ||
789 | if (!idled) | |
790 | return 0; | |
791 | ||
792 | if (ret) { | |
1da177e4 LT |
793 | static unsigned long t; |
794 | ||
795 | /* This always fails on some SMP boards running UP kernels. | |
796 | * Only report the failure the first 5 times. | |
797 | */ | |
798 | if (++t < 5) | |
799 | { | |
800 | printk(KERN_DEBUG "apm_do_idle failed (%d)\n", | |
801 | (eax >> 8) & 0xff); | |
802 | t = jiffies; | |
803 | } | |
804 | return -1; | |
805 | } | |
806 | clock_slowed = (apm_info.bios.flags & APM_IDLE_SLOWS_CLOCK) != 0; | |
807 | return clock_slowed; | |
808 | } | |
809 | ||
810 | /** | |
811 | * apm_do_busy - inform the BIOS the CPU is busy | |
812 | * | |
813 | * Request that the BIOS brings the CPU back to full performance. | |
814 | */ | |
815 | ||
816 | static void apm_do_busy(void) | |
817 | { | |
818 | u32 dummy; | |
819 | ||
820 | if (clock_slowed || ALWAYS_CALL_BUSY) { | |
821 | (void) apm_bios_call_simple(APM_FUNC_BUSY, 0, 0, &dummy); | |
822 | clock_slowed = 0; | |
823 | } | |
824 | } | |
825 | ||
826 | /* | |
827 | * If no process has really been interested in | |
828 | * the CPU for some time, we want to call BIOS | |
829 | * power management - we probably want | |
830 | * to conserve power. | |
831 | */ | |
832 | #define IDLE_CALC_LIMIT (HZ * 100) | |
833 | #define IDLE_LEAKY_MAX 16 | |
834 | ||
835 | static void (*original_pm_idle)(void); | |
836 | ||
837 | extern void default_idle(void); | |
838 | ||
839 | /** | |
840 | * apm_cpu_idle - cpu idling for APM capable Linux | |
841 | * | |
842 | * This is the idling function the kernel executes when APM is available. It | |
843 | * tries to do BIOS powermanagement based on the average system idle time. | |
844 | * Furthermore it calls the system default idle routine. | |
845 | */ | |
846 | ||
847 | static void apm_cpu_idle(void) | |
848 | { | |
849 | static int use_apm_idle; /* = 0 */ | |
850 | static unsigned int last_jiffies; /* = 0 */ | |
851 | static unsigned int last_stime; /* = 0 */ | |
852 | ||
853 | int apm_idle_done = 0; | |
854 | unsigned int jiffies_since_last_check = jiffies - last_jiffies; | |
855 | unsigned int bucket; | |
856 | ||
857 | recalc: | |
858 | if (jiffies_since_last_check > IDLE_CALC_LIMIT) { | |
859 | use_apm_idle = 0; | |
860 | last_jiffies = jiffies; | |
861 | last_stime = current->stime; | |
862 | } else if (jiffies_since_last_check > idle_period) { | |
863 | unsigned int idle_percentage; | |
864 | ||
865 | idle_percentage = current->stime - last_stime; | |
866 | idle_percentage *= 100; | |
867 | idle_percentage /= jiffies_since_last_check; | |
868 | use_apm_idle = (idle_percentage > idle_threshold); | |
869 | if (apm_info.forbid_idle) | |
870 | use_apm_idle = 0; | |
871 | last_jiffies = jiffies; | |
872 | last_stime = current->stime; | |
873 | } | |
874 | ||
875 | bucket = IDLE_LEAKY_MAX; | |
876 | ||
877 | while (!need_resched()) { | |
878 | if (use_apm_idle) { | |
879 | unsigned int t; | |
880 | ||
881 | t = jiffies; | |
882 | switch (apm_do_idle()) { | |
883 | case 0: apm_idle_done = 1; | |
884 | if (t != jiffies) { | |
885 | if (bucket) { | |
886 | bucket = IDLE_LEAKY_MAX; | |
887 | continue; | |
888 | } | |
889 | } else if (bucket) { | |
890 | bucket--; | |
891 | continue; | |
892 | } | |
893 | break; | |
894 | case 1: apm_idle_done = 1; | |
895 | break; | |
896 | default: /* BIOS refused */ | |
897 | break; | |
898 | } | |
899 | } | |
900 | if (original_pm_idle) | |
901 | original_pm_idle(); | |
902 | else | |
903 | default_idle(); | |
904 | jiffies_since_last_check = jiffies - last_jiffies; | |
905 | if (jiffies_since_last_check > idle_period) | |
906 | goto recalc; | |
907 | } | |
908 | ||
909 | if (apm_idle_done) | |
910 | apm_do_busy(); | |
911 | } | |
912 | ||
913 | /** | |
914 | * apm_power_off - ask the BIOS to power off | |
915 | * | |
916 | * Handle the power off sequence. This is the one piece of code we | |
917 | * will execute even on SMP machines. In order to deal with BIOS | |
918 | * bugs we support real mode APM BIOS power off calls. We also make | |
919 | * the SMP call on CPU0 as some systems will only honour this call | |
920 | * on their first cpu. | |
921 | */ | |
922 | ||
923 | static void apm_power_off(void) | |
924 | { | |
925 | unsigned char po_bios_call[] = { | |
926 | 0xb8, 0x00, 0x10, /* movw $0x1000,ax */ | |
927 | 0x8e, 0xd0, /* movw ax,ss */ | |
928 | 0xbc, 0x00, 0xf0, /* movw $0xf000,sp */ | |
929 | 0xb8, 0x07, 0x53, /* movw $0x5307,ax */ | |
930 | 0xbb, 0x01, 0x00, /* movw $0x0001,bx */ | |
931 | 0xb9, 0x03, 0x00, /* movw $0x0003,cx */ | |
932 | 0xcd, 0x15 /* int $0x15 */ | |
933 | }; | |
934 | ||
1da177e4 | 935 | /* Some bioses don't like being called from CPU != 0 */ |
1da177e4 LT |
936 | if (apm_info.realmode_power_off) |
937 | { | |
938 | (void)apm_save_cpus(); | |
939 | machine_real_restart(po_bios_call, sizeof(po_bios_call)); | |
940 | } | |
941 | else | |
942 | (void) set_system_power_state(APM_STATE_OFF); | |
943 | } | |
944 | ||
945 | #ifdef CONFIG_APM_DO_ENABLE | |
946 | ||
947 | /** | |
948 | * apm_enable_power_management - enable BIOS APM power management | |
949 | * @enable: enable yes/no | |
950 | * | |
951 | * Enable or disable the APM BIOS power services. | |
952 | */ | |
953 | ||
954 | static int apm_enable_power_management(int enable) | |
955 | { | |
956 | u32 eax; | |
957 | ||
958 | if ((enable == 0) && (apm_info.bios.flags & APM_BIOS_DISENGAGED)) | |
959 | return APM_NOT_ENGAGED; | |
960 | if (apm_bios_call_simple(APM_FUNC_ENABLE_PM, APM_DEVICE_BALL, | |
961 | enable, &eax)) | |
962 | return (eax >> 8) & 0xff; | |
963 | if (enable) | |
964 | apm_info.bios.flags &= ~APM_BIOS_DISABLED; | |
965 | else | |
966 | apm_info.bios.flags |= APM_BIOS_DISABLED; | |
967 | return APM_SUCCESS; | |
968 | } | |
969 | #endif | |
970 | ||
971 | /** | |
972 | * apm_get_power_status - get current power state | |
973 | * @status: returned status | |
974 | * @bat: battery info | |
975 | * @life: estimated life | |
976 | * | |
977 | * Obtain the current power status from the APM BIOS. We return a | |
978 | * status which gives the rough battery status, and current power | |
979 | * source. The bat value returned give an estimate as a percentage | |
980 | * of life and a status value for the battery. The estimated life | |
981 | * if reported is a lifetime in secodnds/minutes at current powwer | |
982 | * consumption. | |
983 | */ | |
984 | ||
985 | static int apm_get_power_status(u_short *status, u_short *bat, u_short *life) | |
986 | { | |
987 | u32 eax; | |
988 | u32 ebx; | |
989 | u32 ecx; | |
990 | u32 edx; | |
991 | u32 dummy; | |
992 | ||
993 | if (apm_info.get_power_status_broken) | |
994 | return APM_32_UNSUPPORTED; | |
995 | if (apm_bios_call(APM_FUNC_GET_STATUS, APM_DEVICE_ALL, 0, | |
996 | &eax, &ebx, &ecx, &edx, &dummy)) | |
997 | return (eax >> 8) & 0xff; | |
998 | *status = ebx; | |
999 | *bat = ecx; | |
1000 | if (apm_info.get_power_status_swabinminutes) { | |
1001 | *life = swab16((u16)edx); | |
1002 | *life |= 0x8000; | |
1003 | } else | |
1004 | *life = edx; | |
1005 | return APM_SUCCESS; | |
1006 | } | |
1007 | ||
1008 | #if 0 | |
1009 | static int apm_get_battery_status(u_short which, u_short *status, | |
1010 | u_short *bat, u_short *life, u_short *nbat) | |
1011 | { | |
1012 | u32 eax; | |
1013 | u32 ebx; | |
1014 | u32 ecx; | |
1015 | u32 edx; | |
1016 | u32 esi; | |
1017 | ||
1018 | if (apm_info.connection_version < 0x0102) { | |
1019 | /* pretend we only have one battery. */ | |
1020 | if (which != 1) | |
1021 | return APM_BAD_DEVICE; | |
1022 | *nbat = 1; | |
1023 | return apm_get_power_status(status, bat, life); | |
1024 | } | |
1025 | ||
1026 | if (apm_bios_call(APM_FUNC_GET_STATUS, (0x8000 | (which)), 0, &eax, | |
1027 | &ebx, &ecx, &edx, &esi)) | |
1028 | return (eax >> 8) & 0xff; | |
1029 | *status = ebx; | |
1030 | *bat = ecx; | |
1031 | *life = edx; | |
1032 | *nbat = esi; | |
1033 | return APM_SUCCESS; | |
1034 | } | |
1035 | #endif | |
1036 | ||
1037 | /** | |
1038 | * apm_engage_power_management - enable PM on a device | |
1039 | * @device: identity of device | |
1040 | * @enable: on/off | |
1041 | * | |
1042 | * Activate or deactive power management on either a specific device | |
1043 | * or the entire system (%APM_DEVICE_ALL). | |
1044 | */ | |
1045 | ||
1046 | static int apm_engage_power_management(u_short device, int enable) | |
1047 | { | |
1048 | u32 eax; | |
1049 | ||
1050 | if ((enable == 0) && (device == APM_DEVICE_ALL) | |
1051 | && (apm_info.bios.flags & APM_BIOS_DISABLED)) | |
1052 | return APM_DISABLED; | |
1053 | if (apm_bios_call_simple(APM_FUNC_ENGAGE_PM, device, enable, &eax)) | |
1054 | return (eax >> 8) & 0xff; | |
1055 | if (device == APM_DEVICE_ALL) { | |
1056 | if (enable) | |
1057 | apm_info.bios.flags &= ~APM_BIOS_DISENGAGED; | |
1058 | else | |
1059 | apm_info.bios.flags |= APM_BIOS_DISENGAGED; | |
1060 | } | |
1061 | return APM_SUCCESS; | |
1062 | } | |
1063 | ||
1064 | #if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT) | |
1065 | ||
1066 | /** | |
1067 | * apm_console_blank - blank the display | |
1068 | * @blank: on/off | |
1069 | * | |
1070 | * Attempt to blank the console, firstly by blanking just video device | |
1071 | * zero, and if that fails (some BIOSes don't support it) then it blanks | |
1072 | * all video devices. Typically the BIOS will do laptop backlight and | |
1073 | * monitor powerdown for us. | |
1074 | */ | |
1075 | ||
1076 | static int apm_console_blank(int blank) | |
1077 | { | |
1078 | int error; | |
1079 | u_short state; | |
1080 | ||
1081 | state = blank ? APM_STATE_STANDBY : APM_STATE_READY; | |
1082 | /* Blank the first display device */ | |
1083 | error = set_power_state(0x100, state); | |
1084 | if ((error != APM_SUCCESS) && (error != APM_NO_ERROR)) { | |
1085 | /* try to blank them all instead */ | |
1086 | error = set_power_state(0x1ff, state); | |
1087 | if ((error != APM_SUCCESS) && (error != APM_NO_ERROR)) | |
1088 | /* try to blank device one instead */ | |
1089 | error = set_power_state(0x101, state); | |
1090 | } | |
1091 | if ((error == APM_SUCCESS) || (error == APM_NO_ERROR)) | |
1092 | return 1; | |
1093 | if (error == APM_NOT_ENGAGED) { | |
1094 | static int tried; | |
1095 | int eng_error; | |
1096 | if (tried++ == 0) { | |
1097 | eng_error = apm_engage_power_management(APM_DEVICE_ALL, 1); | |
1098 | if (eng_error) { | |
1099 | apm_error("set display", error); | |
1100 | apm_error("engage interface", eng_error); | |
1101 | return 0; | |
1102 | } else | |
1103 | return apm_console_blank(blank); | |
1104 | } | |
1105 | } | |
1106 | apm_error("set display", error); | |
1107 | return 0; | |
1108 | } | |
1109 | #endif | |
1110 | ||
1111 | static int queue_empty(struct apm_user *as) | |
1112 | { | |
1113 | return as->event_head == as->event_tail; | |
1114 | } | |
1115 | ||
1116 | static apm_event_t get_queued_event(struct apm_user *as) | |
1117 | { | |
1118 | as->event_tail = (as->event_tail + 1) % APM_MAX_EVENTS; | |
1119 | return as->events[as->event_tail]; | |
1120 | } | |
1121 | ||
1122 | static void queue_event(apm_event_t event, struct apm_user *sender) | |
1123 | { | |
1124 | struct apm_user * as; | |
1125 | ||
1126 | spin_lock(&user_list_lock); | |
1127 | if (user_list == NULL) | |
1128 | goto out; | |
1129 | for (as = user_list; as != NULL; as = as->next) { | |
1130 | if ((as == sender) || (!as->reader)) | |
1131 | continue; | |
1132 | as->event_head = (as->event_head + 1) % APM_MAX_EVENTS; | |
1133 | if (as->event_head == as->event_tail) { | |
1134 | static int notified; | |
1135 | ||
1136 | if (notified++ == 0) | |
1137 | printk(KERN_ERR "apm: an event queue overflowed\n"); | |
1138 | as->event_tail = (as->event_tail + 1) % APM_MAX_EVENTS; | |
1139 | } | |
1140 | as->events[as->event_head] = event; | |
1141 | if ((!as->suser) || (!as->writer)) | |
1142 | continue; | |
1143 | switch (event) { | |
1144 | case APM_SYS_SUSPEND: | |
1145 | case APM_USER_SUSPEND: | |
1146 | as->suspends_pending++; | |
1147 | suspends_pending++; | |
1148 | break; | |
1149 | ||
1150 | case APM_SYS_STANDBY: | |
1151 | case APM_USER_STANDBY: | |
1152 | as->standbys_pending++; | |
1153 | standbys_pending++; | |
1154 | break; | |
1155 | } | |
1156 | } | |
1157 | wake_up_interruptible(&apm_waitqueue); | |
1158 | out: | |
1159 | spin_unlock(&user_list_lock); | |
1160 | } | |
1161 | ||
1162 | static void set_time(void) | |
1163 | { | |
1164 | if (got_clock_diff) { /* Must know time zone in order to set clock */ | |
1165 | xtime.tv_sec = get_cmos_time() + clock_cmos_diff; | |
1166 | xtime.tv_nsec = 0; | |
1167 | } | |
1168 | } | |
1169 | ||
1170 | static void get_time_diff(void) | |
1171 | { | |
1172 | #ifndef CONFIG_APM_RTC_IS_GMT | |
1173 | /* | |
1174 | * Estimate time zone so that set_time can update the clock | |
1175 | */ | |
1176 | clock_cmos_diff = -get_cmos_time(); | |
1177 | clock_cmos_diff += get_seconds(); | |
1178 | got_clock_diff = 1; | |
1179 | #endif | |
1180 | } | |
1181 | ||
1182 | static void reinit_timer(void) | |
1183 | { | |
1184 | #ifdef INIT_TIMER_AFTER_SUSPEND | |
306e440d | 1185 | unsigned long flags; |
1da177e4 LT |
1186 | |
1187 | spin_lock_irqsave(&i8253_lock, flags); | |
1188 | /* set the clock to 100 Hz */ | |
1189 | outb_p(0x34, PIT_MODE); /* binary, mode 2, LSB/MSB, ch 0 */ | |
1190 | udelay(10); | |
1191 | outb_p(LATCH & 0xff, PIT_CH0); /* LSB */ | |
1192 | udelay(10); | |
1193 | outb(LATCH >> 8, PIT_CH0); /* MSB */ | |
1194 | udelay(10); | |
1195 | spin_unlock_irqrestore(&i8253_lock, flags); | |
1196 | #endif | |
1197 | } | |
1198 | ||
1199 | static int suspend(int vetoable) | |
1200 | { | |
1201 | int err; | |
1202 | struct apm_user *as; | |
1203 | ||
1204 | if (pm_send_all(PM_SUSPEND, (void *)3)) { | |
1205 | /* Vetoed */ | |
1206 | if (vetoable) { | |
1207 | if (apm_info.connection_version > 0x100) | |
1208 | set_system_power_state(APM_STATE_REJECT); | |
1209 | err = -EBUSY; | |
1210 | ignore_sys_suspend = 0; | |
1211 | printk(KERN_WARNING "apm: suspend was vetoed.\n"); | |
1212 | goto out; | |
1213 | } | |
1214 | printk(KERN_CRIT "apm: suspend was vetoed, but suspending anyway.\n"); | |
1215 | } | |
1216 | ||
1217 | device_suspend(PMSG_SUSPEND); | |
1218 | local_irq_disable(); | |
1219 | device_power_down(PMSG_SUSPEND); | |
1220 | ||
1221 | /* serialize with the timer interrupt */ | |
1222 | write_seqlock(&xtime_lock); | |
1223 | ||
1224 | /* protect against access to timer chip registers */ | |
1225 | spin_lock(&i8253_lock); | |
1226 | ||
1227 | get_time_diff(); | |
1228 | /* | |
1229 | * Irq spinlock must be dropped around set_system_power_state. | |
1230 | * We'll undo any timer changes due to interrupts below. | |
1231 | */ | |
1232 | spin_unlock(&i8253_lock); | |
1233 | write_sequnlock(&xtime_lock); | |
1234 | local_irq_enable(); | |
1235 | ||
1236 | save_processor_state(); | |
1237 | err = set_system_power_state(APM_STATE_SUSPEND); | |
92c6dc59 | 1238 | ignore_normal_resume = 1; |
1da177e4 LT |
1239 | restore_processor_state(); |
1240 | ||
1241 | local_irq_disable(); | |
1242 | write_seqlock(&xtime_lock); | |
1243 | spin_lock(&i8253_lock); | |
1244 | reinit_timer(); | |
1245 | set_time(); | |
1da177e4 LT |
1246 | |
1247 | spin_unlock(&i8253_lock); | |
1248 | write_sequnlock(&xtime_lock); | |
1249 | ||
1250 | if (err == APM_NO_ERROR) | |
1251 | err = APM_SUCCESS; | |
1252 | if (err != APM_SUCCESS) | |
1253 | apm_error("suspend", err); | |
1254 | err = (err == APM_SUCCESS) ? 0 : -EIO; | |
1255 | device_power_up(); | |
1256 | local_irq_enable(); | |
1257 | device_resume(); | |
1258 | pm_send_all(PM_RESUME, (void *)0); | |
1259 | queue_event(APM_NORMAL_RESUME, NULL); | |
1260 | out: | |
1261 | spin_lock(&user_list_lock); | |
1262 | for (as = user_list; as != NULL; as = as->next) { | |
1263 | as->suspend_wait = 0; | |
1264 | as->suspend_result = err; | |
1265 | } | |
1266 | spin_unlock(&user_list_lock); | |
1267 | wake_up_interruptible(&apm_suspend_waitqueue); | |
1268 | return err; | |
1269 | } | |
1270 | ||
1271 | static void standby(void) | |
1272 | { | |
1273 | int err; | |
1274 | ||
1275 | local_irq_disable(); | |
1276 | device_power_down(PMSG_SUSPEND); | |
1277 | /* serialize with the timer interrupt */ | |
1278 | write_seqlock(&xtime_lock); | |
1279 | /* If needed, notify drivers here */ | |
1280 | get_time_diff(); | |
1281 | write_sequnlock(&xtime_lock); | |
1282 | local_irq_enable(); | |
1283 | ||
1284 | err = set_system_power_state(APM_STATE_STANDBY); | |
1285 | if ((err != APM_SUCCESS) && (err != APM_NO_ERROR)) | |
1286 | apm_error("standby", err); | |
1287 | ||
1288 | local_irq_disable(); | |
1289 | device_power_up(); | |
1290 | local_irq_enable(); | |
1291 | } | |
1292 | ||
1293 | static apm_event_t get_event(void) | |
1294 | { | |
1295 | int error; | |
1296 | apm_event_t event; | |
1297 | apm_eventinfo_t info; | |
1298 | ||
1299 | static int notified; | |
1300 | ||
1301 | /* we don't use the eventinfo */ | |
1302 | error = apm_get_event(&event, &info); | |
1303 | if (error == APM_SUCCESS) | |
1304 | return event; | |
1305 | ||
1306 | if ((error != APM_NO_EVENTS) && (notified++ == 0)) | |
1307 | apm_error("get_event", error); | |
1308 | ||
1309 | return 0; | |
1310 | } | |
1311 | ||
1312 | static void check_events(void) | |
1313 | { | |
1314 | apm_event_t event; | |
1315 | static unsigned long last_resume; | |
1316 | static int ignore_bounce; | |
1317 | ||
1318 | while ((event = get_event()) != 0) { | |
1319 | if (debug) { | |
1320 | if (event <= NR_APM_EVENT_NAME) | |
1321 | printk(KERN_DEBUG "apm: received %s notify\n", | |
1322 | apm_event_name[event - 1]); | |
1323 | else | |
1324 | printk(KERN_DEBUG "apm: received unknown " | |
1325 | "event 0x%02x\n", event); | |
1326 | } | |
1327 | if (ignore_bounce | |
1328 | && ((jiffies - last_resume) > bounce_interval)) | |
1329 | ignore_bounce = 0; | |
1330 | ||
1331 | switch (event) { | |
1332 | case APM_SYS_STANDBY: | |
1333 | case APM_USER_STANDBY: | |
1334 | queue_event(event, NULL); | |
1335 | if (standbys_pending <= 0) | |
1336 | standby(); | |
1337 | break; | |
1338 | ||
1339 | case APM_USER_SUSPEND: | |
1340 | #ifdef CONFIG_APM_IGNORE_USER_SUSPEND | |
1341 | if (apm_info.connection_version > 0x100) | |
1342 | set_system_power_state(APM_STATE_REJECT); | |
1343 | break; | |
1344 | #endif | |
1345 | case APM_SYS_SUSPEND: | |
1346 | if (ignore_bounce) { | |
1347 | if (apm_info.connection_version > 0x100) | |
1348 | set_system_power_state(APM_STATE_REJECT); | |
1349 | break; | |
1350 | } | |
1351 | /* | |
1352 | * If we are already processing a SUSPEND, | |
1353 | * then further SUSPEND events from the BIOS | |
1354 | * will be ignored. We also return here to | |
1355 | * cope with the fact that the Thinkpads keep | |
1356 | * sending a SUSPEND event until something else | |
1357 | * happens! | |
1358 | */ | |
1359 | if (ignore_sys_suspend) | |
1360 | return; | |
1361 | ignore_sys_suspend = 1; | |
1362 | queue_event(event, NULL); | |
1363 | if (suspends_pending <= 0) | |
1364 | (void) suspend(1); | |
1365 | break; | |
1366 | ||
1367 | case APM_NORMAL_RESUME: | |
1368 | case APM_CRITICAL_RESUME: | |
1369 | case APM_STANDBY_RESUME: | |
1370 | ignore_sys_suspend = 0; | |
1371 | last_resume = jiffies; | |
1372 | ignore_bounce = 1; | |
1373 | if ((event != APM_NORMAL_RESUME) | |
1374 | || (ignore_normal_resume == 0)) { | |
1375 | write_seqlock_irq(&xtime_lock); | |
1376 | set_time(); | |
1377 | write_sequnlock_irq(&xtime_lock); | |
1378 | device_resume(); | |
1379 | pm_send_all(PM_RESUME, (void *)0); | |
1380 | queue_event(event, NULL); | |
1381 | } | |
1382 | ignore_normal_resume = 0; | |
1383 | break; | |
1384 | ||
1385 | case APM_CAPABILITY_CHANGE: | |
1386 | case APM_LOW_BATTERY: | |
1387 | case APM_POWER_STATUS_CHANGE: | |
1388 | queue_event(event, NULL); | |
1389 | /* If needed, notify drivers here */ | |
1390 | break; | |
1391 | ||
1392 | case APM_UPDATE_TIME: | |
1393 | write_seqlock_irq(&xtime_lock); | |
1394 | set_time(); | |
1395 | write_sequnlock_irq(&xtime_lock); | |
1396 | break; | |
1397 | ||
1398 | case APM_CRITICAL_SUSPEND: | |
1399 | /* | |
1400 | * We are not allowed to reject a critical suspend. | |
1401 | */ | |
1402 | (void) suspend(0); | |
1403 | break; | |
1404 | } | |
1405 | } | |
1406 | } | |
1407 | ||
1408 | static void apm_event_handler(void) | |
1409 | { | |
1410 | static int pending_count = 4; | |
1411 | int err; | |
1412 | ||
1413 | if ((standbys_pending > 0) || (suspends_pending > 0)) { | |
1414 | if ((apm_info.connection_version > 0x100) && | |
1415 | (pending_count-- <= 0)) { | |
1416 | pending_count = 4; | |
1417 | if (debug) | |
1418 | printk(KERN_DEBUG "apm: setting state busy\n"); | |
1419 | err = set_system_power_state(APM_STATE_BUSY); | |
1420 | if (err) | |
1421 | apm_error("busy", err); | |
1422 | } | |
1423 | } else | |
1424 | pending_count = 4; | |
1425 | check_events(); | |
1426 | } | |
1427 | ||
1428 | /* | |
1429 | * This is the APM thread main loop. | |
1430 | */ | |
1431 | ||
1432 | static void apm_mainloop(void) | |
1433 | { | |
1434 | DECLARE_WAITQUEUE(wait, current); | |
1435 | ||
1436 | add_wait_queue(&apm_waitqueue, &wait); | |
1437 | set_current_state(TASK_INTERRUPTIBLE); | |
1438 | for (;;) { | |
1439 | schedule_timeout(APM_CHECK_TIMEOUT); | |
1440 | if (exit_kapmd) | |
1441 | break; | |
1442 | /* | |
1443 | * Ok, check all events, check for idle (and mark us sleeping | |
1444 | * so as not to count towards the load average).. | |
1445 | */ | |
1446 | set_current_state(TASK_INTERRUPTIBLE); | |
1447 | apm_event_handler(); | |
1448 | } | |
1449 | remove_wait_queue(&apm_waitqueue, &wait); | |
1450 | } | |
1451 | ||
1452 | static int check_apm_user(struct apm_user *as, const char *func) | |
1453 | { | |
1454 | if ((as == NULL) || (as->magic != APM_BIOS_MAGIC)) { | |
1455 | printk(KERN_ERR "apm: %s passed bad filp\n", func); | |
1456 | return 1; | |
1457 | } | |
1458 | return 0; | |
1459 | } | |
1460 | ||
1461 | static ssize_t do_read(struct file *fp, char __user *buf, size_t count, loff_t *ppos) | |
1462 | { | |
1463 | struct apm_user * as; | |
1464 | int i; | |
1465 | apm_event_t event; | |
1466 | ||
1467 | as = fp->private_data; | |
1468 | if (check_apm_user(as, "read")) | |
1469 | return -EIO; | |
1470 | if ((int)count < sizeof(apm_event_t)) | |
1471 | return -EINVAL; | |
1472 | if ((queue_empty(as)) && (fp->f_flags & O_NONBLOCK)) | |
1473 | return -EAGAIN; | |
1474 | wait_event_interruptible(apm_waitqueue, !queue_empty(as)); | |
1475 | i = count; | |
1476 | while ((i >= sizeof(event)) && !queue_empty(as)) { | |
1477 | event = get_queued_event(as); | |
1478 | if (copy_to_user(buf, &event, sizeof(event))) { | |
1479 | if (i < count) | |
1480 | break; | |
1481 | return -EFAULT; | |
1482 | } | |
1483 | switch (event) { | |
1484 | case APM_SYS_SUSPEND: | |
1485 | case APM_USER_SUSPEND: | |
1486 | as->suspends_read++; | |
1487 | break; | |
1488 | ||
1489 | case APM_SYS_STANDBY: | |
1490 | case APM_USER_STANDBY: | |
1491 | as->standbys_read++; | |
1492 | break; | |
1493 | } | |
1494 | buf += sizeof(event); | |
1495 | i -= sizeof(event); | |
1496 | } | |
1497 | if (i < count) | |
1498 | return count - i; | |
1499 | if (signal_pending(current)) | |
1500 | return -ERESTARTSYS; | |
1501 | return 0; | |
1502 | } | |
1503 | ||
1504 | static unsigned int do_poll(struct file *fp, poll_table * wait) | |
1505 | { | |
1506 | struct apm_user * as; | |
1507 | ||
1508 | as = fp->private_data; | |
1509 | if (check_apm_user(as, "poll")) | |
1510 | return 0; | |
1511 | poll_wait(fp, &apm_waitqueue, wait); | |
1512 | if (!queue_empty(as)) | |
1513 | return POLLIN | POLLRDNORM; | |
1514 | return 0; | |
1515 | } | |
1516 | ||
1517 | static int do_ioctl(struct inode * inode, struct file *filp, | |
1518 | u_int cmd, u_long arg) | |
1519 | { | |
1520 | struct apm_user * as; | |
1521 | ||
1522 | as = filp->private_data; | |
1523 | if (check_apm_user(as, "ioctl")) | |
1524 | return -EIO; | |
1525 | if ((!as->suser) || (!as->writer)) | |
1526 | return -EPERM; | |
1527 | switch (cmd) { | |
1528 | case APM_IOC_STANDBY: | |
1529 | if (as->standbys_read > 0) { | |
1530 | as->standbys_read--; | |
1531 | as->standbys_pending--; | |
1532 | standbys_pending--; | |
1533 | } else | |
1534 | queue_event(APM_USER_STANDBY, as); | |
1535 | if (standbys_pending <= 0) | |
1536 | standby(); | |
1537 | break; | |
1538 | case APM_IOC_SUSPEND: | |
1539 | if (as->suspends_read > 0) { | |
1540 | as->suspends_read--; | |
1541 | as->suspends_pending--; | |
1542 | suspends_pending--; | |
1543 | } else | |
1544 | queue_event(APM_USER_SUSPEND, as); | |
1545 | if (suspends_pending <= 0) { | |
1546 | return suspend(1); | |
1547 | } else { | |
1548 | as->suspend_wait = 1; | |
1549 | wait_event_interruptible(apm_suspend_waitqueue, | |
1550 | as->suspend_wait == 0); | |
1551 | return as->suspend_result; | |
1552 | } | |
1553 | break; | |
1554 | default: | |
1555 | return -EINVAL; | |
1556 | } | |
1557 | return 0; | |
1558 | } | |
1559 | ||
1560 | static int do_release(struct inode * inode, struct file * filp) | |
1561 | { | |
1562 | struct apm_user * as; | |
1563 | ||
1564 | as = filp->private_data; | |
1565 | if (check_apm_user(as, "release")) | |
1566 | return 0; | |
1567 | filp->private_data = NULL; | |
1568 | if (as->standbys_pending > 0) { | |
1569 | standbys_pending -= as->standbys_pending; | |
1570 | if (standbys_pending <= 0) | |
1571 | standby(); | |
1572 | } | |
1573 | if (as->suspends_pending > 0) { | |
1574 | suspends_pending -= as->suspends_pending; | |
1575 | if (suspends_pending <= 0) | |
1576 | (void) suspend(1); | |
1577 | } | |
1578 | spin_lock(&user_list_lock); | |
1579 | if (user_list == as) | |
1580 | user_list = as->next; | |
1581 | else { | |
1582 | struct apm_user * as1; | |
1583 | ||
1584 | for (as1 = user_list; | |
1585 | (as1 != NULL) && (as1->next != as); | |
1586 | as1 = as1->next) | |
1587 | ; | |
1588 | if (as1 == NULL) | |
1589 | printk(KERN_ERR "apm: filp not in user list\n"); | |
1590 | else | |
1591 | as1->next = as->next; | |
1592 | } | |
1593 | spin_unlock(&user_list_lock); | |
1594 | kfree(as); | |
1595 | return 0; | |
1596 | } | |
1597 | ||
1598 | static int do_open(struct inode * inode, struct file * filp) | |
1599 | { | |
1600 | struct apm_user * as; | |
1601 | ||
1602 | as = (struct apm_user *)kmalloc(sizeof(*as), GFP_KERNEL); | |
1603 | if (as == NULL) { | |
1604 | printk(KERN_ERR "apm: cannot allocate struct of size %d bytes\n", | |
1605 | sizeof(*as)); | |
1606 | return -ENOMEM; | |
1607 | } | |
1608 | as->magic = APM_BIOS_MAGIC; | |
1609 | as->event_tail = as->event_head = 0; | |
1610 | as->suspends_pending = as->standbys_pending = 0; | |
1611 | as->suspends_read = as->standbys_read = 0; | |
1612 | /* | |
1613 | * XXX - this is a tiny bit broken, when we consider BSD | |
1614 | * process accounting. If the device is opened by root, we | |
1615 | * instantly flag that we used superuser privs. Who knows, | |
1616 | * we might close the device immediately without doing a | |
1617 | * privileged operation -- cevans | |
1618 | */ | |
1619 | as->suser = capable(CAP_SYS_ADMIN); | |
1620 | as->writer = (filp->f_mode & FMODE_WRITE) == FMODE_WRITE; | |
1621 | as->reader = (filp->f_mode & FMODE_READ) == FMODE_READ; | |
1622 | spin_lock(&user_list_lock); | |
1623 | as->next = user_list; | |
1624 | user_list = as; | |
1625 | spin_unlock(&user_list_lock); | |
1626 | filp->private_data = as; | |
1627 | return 0; | |
1628 | } | |
1629 | ||
1630 | static int apm_get_info(char *buf, char **start, off_t fpos, int length) | |
1631 | { | |
1632 | char * p; | |
1633 | unsigned short bx; | |
1634 | unsigned short cx; | |
1635 | unsigned short dx; | |
1636 | int error; | |
1637 | unsigned short ac_line_status = 0xff; | |
1638 | unsigned short battery_status = 0xff; | |
1639 | unsigned short battery_flag = 0xff; | |
1640 | int percentage = -1; | |
1641 | int time_units = -1; | |
1642 | char *units = "?"; | |
1643 | ||
1644 | p = buf; | |
1645 | ||
1646 | if ((num_online_cpus() == 1) && | |
1647 | !(error = apm_get_power_status(&bx, &cx, &dx))) { | |
1648 | ac_line_status = (bx >> 8) & 0xff; | |
1649 | battery_status = bx & 0xff; | |
1650 | if ((cx & 0xff) != 0xff) | |
1651 | percentage = cx & 0xff; | |
1652 | ||
1653 | if (apm_info.connection_version > 0x100) { | |
1654 | battery_flag = (cx >> 8) & 0xff; | |
1655 | if (dx != 0xffff) { | |
1656 | units = (dx & 0x8000) ? "min" : "sec"; | |
1657 | time_units = dx & 0x7fff; | |
1658 | } | |
1659 | } | |
1660 | } | |
1661 | /* Arguments, with symbols from linux/apm_bios.h. Information is | |
1662 | from the Get Power Status (0x0a) call unless otherwise noted. | |
1663 | ||
1664 | 0) Linux driver version (this will change if format changes) | |
1665 | 1) APM BIOS Version. Usually 1.0, 1.1 or 1.2. | |
1666 | 2) APM flags from APM Installation Check (0x00): | |
1667 | bit 0: APM_16_BIT_SUPPORT | |
1668 | bit 1: APM_32_BIT_SUPPORT | |
1669 | bit 2: APM_IDLE_SLOWS_CLOCK | |
1670 | bit 3: APM_BIOS_DISABLED | |
1671 | bit 4: APM_BIOS_DISENGAGED | |
1672 | 3) AC line status | |
1673 | 0x00: Off-line | |
1674 | 0x01: On-line | |
1675 | 0x02: On backup power (BIOS >= 1.1 only) | |
1676 | 0xff: Unknown | |
1677 | 4) Battery status | |
1678 | 0x00: High | |
1679 | 0x01: Low | |
1680 | 0x02: Critical | |
1681 | 0x03: Charging | |
1682 | 0x04: Selected battery not present (BIOS >= 1.2 only) | |
1683 | 0xff: Unknown | |
1684 | 5) Battery flag | |
1685 | bit 0: High | |
1686 | bit 1: Low | |
1687 | bit 2: Critical | |
1688 | bit 3: Charging | |
1689 | bit 7: No system battery | |
1690 | 0xff: Unknown | |
1691 | 6) Remaining battery life (percentage of charge): | |
1692 | 0-100: valid | |
1693 | -1: Unknown | |
1694 | 7) Remaining battery life (time units): | |
1695 | Number of remaining minutes or seconds | |
1696 | -1: Unknown | |
1697 | 8) min = minutes; sec = seconds */ | |
1698 | ||
1699 | p += sprintf(p, "%s %d.%d 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n", | |
1700 | driver_version, | |
1701 | (apm_info.bios.version >> 8) & 0xff, | |
1702 | apm_info.bios.version & 0xff, | |
1703 | apm_info.bios.flags, | |
1704 | ac_line_status, | |
1705 | battery_status, | |
1706 | battery_flag, | |
1707 | percentage, | |
1708 | time_units, | |
1709 | units); | |
1710 | ||
1711 | return p - buf; | |
1712 | } | |
1713 | ||
1714 | static int apm(void *unused) | |
1715 | { | |
1716 | unsigned short bx; | |
1717 | unsigned short cx; | |
1718 | unsigned short dx; | |
1719 | int error; | |
1720 | char * power_stat; | |
1721 | char * bat_stat; | |
1722 | ||
1723 | kapmd_running = 1; | |
1724 | ||
1725 | daemonize("kapmd"); | |
1726 | ||
1727 | current->flags |= PF_NOFREEZE; | |
1728 | ||
1729 | #ifdef CONFIG_SMP | |
1730 | /* 2002/08/01 - WT | |
1731 | * This is to avoid random crashes at boot time during initialization | |
1732 | * on SMP systems in case of "apm=power-off" mode. Seen on ASUS A7M266D. | |
1733 | * Some bioses don't like being called from CPU != 0. | |
1734 | * Method suggested by Ingo Molnar. | |
1735 | */ | |
1736 | set_cpus_allowed(current, cpumask_of_cpu(0)); | |
1737 | BUG_ON(smp_processor_id() != 0); | |
1738 | #endif | |
1739 | ||
1740 | if (apm_info.connection_version == 0) { | |
1741 | apm_info.connection_version = apm_info.bios.version; | |
1742 | if (apm_info.connection_version > 0x100) { | |
1743 | /* | |
1744 | * We only support BIOSs up to version 1.2 | |
1745 | */ | |
1746 | if (apm_info.connection_version > 0x0102) | |
1747 | apm_info.connection_version = 0x0102; | |
1748 | error = apm_driver_version(&apm_info.connection_version); | |
1749 | if (error != APM_SUCCESS) { | |
1750 | apm_error("driver version", error); | |
1751 | /* Fall back to an APM 1.0 connection. */ | |
1752 | apm_info.connection_version = 0x100; | |
1753 | } | |
1754 | } | |
1755 | } | |
1756 | ||
1757 | if (debug) | |
1758 | printk(KERN_INFO "apm: Connection version %d.%d\n", | |
1759 | (apm_info.connection_version >> 8) & 0xff, | |
1760 | apm_info.connection_version & 0xff); | |
1761 | ||
1762 | #ifdef CONFIG_APM_DO_ENABLE | |
1763 | if (apm_info.bios.flags & APM_BIOS_DISABLED) { | |
1764 | /* | |
1765 | * This call causes my NEC UltraLite Versa 33/C to hang if it | |
1766 | * is booted with PM disabled but not in the docking station. | |
1767 | * Unfortunate ... | |
1768 | */ | |
1769 | error = apm_enable_power_management(1); | |
1770 | if (error) { | |
1771 | apm_error("enable power management", error); | |
1772 | return -1; | |
1773 | } | |
1774 | } | |
1775 | #endif | |
1776 | ||
1777 | if ((apm_info.bios.flags & APM_BIOS_DISENGAGED) | |
1778 | && (apm_info.connection_version > 0x0100)) { | |
1779 | error = apm_engage_power_management(APM_DEVICE_ALL, 1); | |
1780 | if (error) { | |
1781 | apm_error("engage power management", error); | |
1782 | return -1; | |
1783 | } | |
1784 | } | |
1785 | ||
1786 | if (debug && (num_online_cpus() == 1 || smp )) { | |
1787 | error = apm_get_power_status(&bx, &cx, &dx); | |
1788 | if (error) | |
1789 | printk(KERN_INFO "apm: power status not available\n"); | |
1790 | else { | |
1791 | switch ((bx >> 8) & 0xff) { | |
1792 | case 0: power_stat = "off line"; break; | |
1793 | case 1: power_stat = "on line"; break; | |
1794 | case 2: power_stat = "on backup power"; break; | |
1795 | default: power_stat = "unknown"; break; | |
1796 | } | |
1797 | switch (bx & 0xff) { | |
1798 | case 0: bat_stat = "high"; break; | |
1799 | case 1: bat_stat = "low"; break; | |
1800 | case 2: bat_stat = "critical"; break; | |
1801 | case 3: bat_stat = "charging"; break; | |
1802 | default: bat_stat = "unknown"; break; | |
1803 | } | |
1804 | printk(KERN_INFO | |
1805 | "apm: AC %s, battery status %s, battery life ", | |
1806 | power_stat, bat_stat); | |
1807 | if ((cx & 0xff) == 0xff) | |
1808 | printk("unknown\n"); | |
1809 | else | |
1810 | printk("%d%%\n", cx & 0xff); | |
1811 | if (apm_info.connection_version > 0x100) { | |
1812 | printk(KERN_INFO | |
1813 | "apm: battery flag 0x%02x, battery life ", | |
1814 | (cx >> 8) & 0xff); | |
1815 | if (dx == 0xffff) | |
1816 | printk("unknown\n"); | |
1817 | else | |
1818 | printk("%d %s\n", dx & 0x7fff, | |
1819 | (dx & 0x8000) ? | |
1820 | "minutes" : "seconds"); | |
1821 | } | |
1822 | } | |
1823 | } | |
1824 | ||
1825 | /* Install our power off handler.. */ | |
1826 | if (power_off) | |
1827 | pm_power_off = apm_power_off; | |
1828 | ||
1829 | if (num_online_cpus() == 1 || smp) { | |
1830 | #if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT) | |
1831 | console_blank_hook = apm_console_blank; | |
1832 | #endif | |
1833 | apm_mainloop(); | |
1834 | #if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT) | |
1835 | console_blank_hook = NULL; | |
1836 | #endif | |
1837 | } | |
1838 | kapmd_running = 0; | |
1839 | ||
1840 | return 0; | |
1841 | } | |
1842 | ||
1843 | #ifndef MODULE | |
1844 | static int __init apm_setup(char *str) | |
1845 | { | |
1846 | int invert; | |
1847 | ||
1848 | while ((str != NULL) && (*str != '\0')) { | |
1849 | if (strncmp(str, "off", 3) == 0) | |
1850 | apm_disabled = 1; | |
1851 | if (strncmp(str, "on", 2) == 0) | |
1852 | apm_disabled = 0; | |
1853 | if ((strncmp(str, "bounce-interval=", 16) == 0) || | |
1854 | (strncmp(str, "bounce_interval=", 16) == 0)) | |
1855 | bounce_interval = simple_strtol(str + 16, NULL, 0); | |
1856 | if ((strncmp(str, "idle-threshold=", 15) == 0) || | |
1857 | (strncmp(str, "idle_threshold=", 15) == 0)) | |
1858 | idle_threshold = simple_strtol(str + 15, NULL, 0); | |
1859 | if ((strncmp(str, "idle-period=", 12) == 0) || | |
1860 | (strncmp(str, "idle_period=", 12) == 0)) | |
1861 | idle_period = simple_strtol(str + 12, NULL, 0); | |
1862 | invert = (strncmp(str, "no-", 3) == 0) || | |
1863 | (strncmp(str, "no_", 3) == 0); | |
1864 | if (invert) | |
1865 | str += 3; | |
1866 | if (strncmp(str, "debug", 5) == 0) | |
1867 | debug = !invert; | |
1868 | if ((strncmp(str, "power-off", 9) == 0) || | |
1869 | (strncmp(str, "power_off", 9) == 0)) | |
1870 | power_off = !invert; | |
1871 | if (strncmp(str, "smp", 3) == 0) | |
1872 | { | |
1873 | smp = !invert; | |
1874 | idle_threshold = 100; | |
1875 | } | |
1876 | if ((strncmp(str, "allow-ints", 10) == 0) || | |
1877 | (strncmp(str, "allow_ints", 10) == 0)) | |
1878 | apm_info.allow_ints = !invert; | |
1879 | if ((strncmp(str, "broken-psr", 10) == 0) || | |
1880 | (strncmp(str, "broken_psr", 10) == 0)) | |
1881 | apm_info.get_power_status_broken = !invert; | |
1882 | if ((strncmp(str, "realmode-power-off", 18) == 0) || | |
1883 | (strncmp(str, "realmode_power_off", 18) == 0)) | |
1884 | apm_info.realmode_power_off = !invert; | |
1885 | str = strchr(str, ','); | |
1886 | if (str != NULL) | |
1887 | str += strspn(str, ", \t"); | |
1888 | } | |
1889 | return 1; | |
1890 | } | |
1891 | ||
1892 | __setup("apm=", apm_setup); | |
1893 | #endif | |
1894 | ||
1895 | static struct file_operations apm_bios_fops = { | |
1896 | .owner = THIS_MODULE, | |
1897 | .read = do_read, | |
1898 | .poll = do_poll, | |
1899 | .ioctl = do_ioctl, | |
1900 | .open = do_open, | |
1901 | .release = do_release, | |
1902 | }; | |
1903 | ||
1904 | static struct miscdevice apm_device = { | |
1905 | APM_MINOR_DEV, | |
1906 | "apm_bios", | |
1907 | &apm_bios_fops | |
1908 | }; | |
1909 | ||
1910 | ||
1911 | /* Simple "print if true" callback */ | |
1912 | static int __init print_if_true(struct dmi_system_id *d) | |
1913 | { | |
1914 | printk("%s\n", d->ident); | |
1915 | return 0; | |
1916 | } | |
1917 | ||
1918 | /* | |
1919 | * Some Bioses enable the PS/2 mouse (touchpad) at resume, even if it was | |
1920 | * disabled before the suspend. Linux used to get terribly confused by that. | |
1921 | */ | |
1922 | static int __init broken_ps2_resume(struct dmi_system_id *d) | |
1923 | { | |
1924 | printk(KERN_INFO "%s machine detected. Mousepad Resume Bug workaround hopefully not needed.\n", d->ident); | |
1925 | return 0; | |
1926 | } | |
1927 | ||
1928 | /* Some bioses have a broken protected mode poweroff and need to use realmode */ | |
1929 | static int __init set_realmode_power_off(struct dmi_system_id *d) | |
1930 | { | |
1931 | if (apm_info.realmode_power_off == 0) { | |
1932 | apm_info.realmode_power_off = 1; | |
1933 | printk(KERN_INFO "%s bios detected. Using realmode poweroff only.\n", d->ident); | |
1934 | } | |
1935 | return 0; | |
1936 | } | |
1937 | ||
1938 | /* Some laptops require interrupts to be enabled during APM calls */ | |
1939 | static int __init set_apm_ints(struct dmi_system_id *d) | |
1940 | { | |
1941 | if (apm_info.allow_ints == 0) { | |
1942 | apm_info.allow_ints = 1; | |
1943 | printk(KERN_INFO "%s machine detected. Enabling interrupts during APM calls.\n", d->ident); | |
1944 | } | |
1945 | return 0; | |
1946 | } | |
1947 | ||
1948 | /* Some APM bioses corrupt memory or just plain do not work */ | |
1949 | static int __init apm_is_horked(struct dmi_system_id *d) | |
1950 | { | |
1951 | if (apm_info.disabled == 0) { | |
1952 | apm_info.disabled = 1; | |
1953 | printk(KERN_INFO "%s machine detected. Disabling APM.\n", d->ident); | |
1954 | } | |
1955 | return 0; | |
1956 | } | |
1957 | ||
1958 | static int __init apm_is_horked_d850md(struct dmi_system_id *d) | |
1959 | { | |
1960 | if (apm_info.disabled == 0) { | |
1961 | apm_info.disabled = 1; | |
1962 | printk(KERN_INFO "%s machine detected. Disabling APM.\n", d->ident); | |
1963 | printk(KERN_INFO "This bug is fixed in bios P15 which is available for \n"); | |
1964 | printk(KERN_INFO "download from support.intel.com \n"); | |
1965 | } | |
1966 | return 0; | |
1967 | } | |
1968 | ||
1969 | /* Some APM bioses hang on APM idle calls */ | |
1970 | static int __init apm_likes_to_melt(struct dmi_system_id *d) | |
1971 | { | |
1972 | if (apm_info.forbid_idle == 0) { | |
1973 | apm_info.forbid_idle = 1; | |
1974 | printk(KERN_INFO "%s machine detected. Disabling APM idle calls.\n", d->ident); | |
1975 | } | |
1976 | return 0; | |
1977 | } | |
1978 | ||
1979 | /* | |
1980 | * Check for clue free BIOS implementations who use | |
1981 | * the following QA technique | |
1982 | * | |
1983 | * [ Write BIOS Code ]<------ | |
1984 | * | ^ | |
1985 | * < Does it Compile >----N-- | |
1986 | * |Y ^ | |
1987 | * < Does it Boot Win98 >-N-- | |
1988 | * |Y | |
1989 | * [Ship It] | |
1990 | * | |
1991 | * Phoenix A04 08/24/2000 is known bad (Dell Inspiron 5000e) | |
1992 | * Phoenix A07 09/29/2000 is known good (Dell Inspiron 5000) | |
1993 | */ | |
1994 | static int __init broken_apm_power(struct dmi_system_id *d) | |
1995 | { | |
1996 | apm_info.get_power_status_broken = 1; | |
1997 | printk(KERN_WARNING "BIOS strings suggest APM bugs, disabling power status reporting.\n"); | |
1998 | return 0; | |
1999 | } | |
2000 | ||
2001 | /* | |
2002 | * This bios swaps the APM minute reporting bytes over (Many sony laptops | |
2003 | * have this problem). | |
2004 | */ | |
2005 | static int __init swab_apm_power_in_minutes(struct dmi_system_id *d) | |
2006 | { | |
2007 | apm_info.get_power_status_swabinminutes = 1; | |
2008 | printk(KERN_WARNING "BIOS strings suggest APM reports battery life in minutes and wrong byte order.\n"); | |
2009 | return 0; | |
2010 | } | |
2011 | ||
2012 | static struct dmi_system_id __initdata apm_dmi_table[] = { | |
2013 | { | |
2014 | print_if_true, | |
2015 | KERN_WARNING "IBM T23 - BIOS 1.03b+ and controller firmware 1.02+ may be needed for Linux APM.", | |
2016 | { DMI_MATCH(DMI_SYS_VENDOR, "IBM"), | |
2017 | DMI_MATCH(DMI_BIOS_VERSION, "1AET38WW (1.01b)"), }, | |
2018 | }, | |
2019 | { /* Handle problems with APM on the C600 */ | |
2020 | broken_ps2_resume, "Dell Latitude C600", | |
2021 | { DMI_MATCH(DMI_SYS_VENDOR, "Dell"), | |
2022 | DMI_MATCH(DMI_PRODUCT_NAME, "Latitude C600"), }, | |
2023 | }, | |
2024 | { /* Allow interrupts during suspend on Dell Latitude laptops*/ | |
2025 | set_apm_ints, "Dell Latitude", | |
2026 | { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), | |
2027 | DMI_MATCH(DMI_PRODUCT_NAME, "Latitude C510"), } | |
2028 | }, | |
2029 | { /* APM crashes */ | |
2030 | apm_is_horked, "Dell Inspiron 2500", | |
2031 | { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), | |
2032 | DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 2500"), | |
2033 | DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"), | |
2034 | DMI_MATCH(DMI_BIOS_VERSION,"A11"), }, | |
2035 | }, | |
2036 | { /* Allow interrupts during suspend on Dell Inspiron laptops*/ | |
2037 | set_apm_ints, "Dell Inspiron", { | |
2038 | DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), | |
2039 | DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 4000"), }, | |
2040 | }, | |
2041 | { /* Handle problems with APM on Inspiron 5000e */ | |
2042 | broken_apm_power, "Dell Inspiron 5000e", | |
2043 | { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), | |
2044 | DMI_MATCH(DMI_BIOS_VERSION, "A04"), | |
2045 | DMI_MATCH(DMI_BIOS_DATE, "08/24/2000"), }, | |
2046 | }, | |
2047 | { /* Handle problems with APM on Inspiron 2500 */ | |
2048 | broken_apm_power, "Dell Inspiron 2500", | |
2049 | { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), | |
2050 | DMI_MATCH(DMI_BIOS_VERSION, "A12"), | |
2051 | DMI_MATCH(DMI_BIOS_DATE, "02/04/2002"), }, | |
2052 | }, | |
2053 | { /* APM crashes */ | |
2054 | apm_is_horked, "Dell Dimension 4100", | |
2055 | { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), | |
2056 | DMI_MATCH(DMI_PRODUCT_NAME, "XPS-Z"), | |
2057 | DMI_MATCH(DMI_BIOS_VENDOR,"Intel Corp."), | |
2058 | DMI_MATCH(DMI_BIOS_VERSION,"A11"), }, | |
2059 | }, | |
2060 | { /* Allow interrupts during suspend on Compaq Laptops*/ | |
2061 | set_apm_ints, "Compaq 12XL125", | |
2062 | { DMI_MATCH(DMI_SYS_VENDOR, "Compaq"), | |
2063 | DMI_MATCH(DMI_PRODUCT_NAME, "Compaq PC"), | |
2064 | DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), | |
2065 | DMI_MATCH(DMI_BIOS_VERSION,"4.06"), }, | |
2066 | }, | |
2067 | { /* Allow interrupts during APM or the clock goes slow */ | |
2068 | set_apm_ints, "ASUSTeK", | |
2069 | { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), | |
2070 | DMI_MATCH(DMI_PRODUCT_NAME, "L8400K series Notebook PC"), }, | |
2071 | }, | |
2072 | { /* APM blows on shutdown */ | |
2073 | apm_is_horked, "ABIT KX7-333[R]", | |
2074 | { DMI_MATCH(DMI_BOARD_VENDOR, "ABIT"), | |
2075 | DMI_MATCH(DMI_BOARD_NAME, "VT8367-8233A (KX7-333[R])"), }, | |
2076 | }, | |
2077 | { /* APM crashes */ | |
2078 | apm_is_horked, "Trigem Delhi3", | |
2079 | { DMI_MATCH(DMI_SYS_VENDOR, "TriGem Computer, Inc"), | |
2080 | DMI_MATCH(DMI_PRODUCT_NAME, "Delhi3"), }, | |
2081 | }, | |
2082 | { /* APM crashes */ | |
2083 | apm_is_horked, "Fujitsu-Siemens", | |
2084 | { DMI_MATCH(DMI_BIOS_VENDOR, "hoenix/FUJITSU SIEMENS"), | |
2085 | DMI_MATCH(DMI_BIOS_VERSION, "Version1.01"), }, | |
2086 | }, | |
2087 | { /* APM crashes */ | |
2088 | apm_is_horked_d850md, "Intel D850MD", | |
2089 | { DMI_MATCH(DMI_BIOS_VENDOR, "Intel Corp."), | |
2090 | DMI_MATCH(DMI_BIOS_VERSION, "MV85010A.86A.0016.P07.0201251536"), }, | |
2091 | }, | |
2092 | { /* APM crashes */ | |
2093 | apm_is_horked, "Intel D810EMO", | |
2094 | { DMI_MATCH(DMI_BIOS_VENDOR, "Intel Corp."), | |
2095 | DMI_MATCH(DMI_BIOS_VERSION, "MO81010A.86A.0008.P04.0004170800"), }, | |
2096 | }, | |
2097 | { /* APM crashes */ | |
2098 | apm_is_horked, "Dell XPS-Z", | |
2099 | { DMI_MATCH(DMI_BIOS_VENDOR, "Intel Corp."), | |
2100 | DMI_MATCH(DMI_BIOS_VERSION, "A11"), | |
2101 | DMI_MATCH(DMI_PRODUCT_NAME, "XPS-Z"), }, | |
2102 | }, | |
2103 | { /* APM crashes */ | |
2104 | apm_is_horked, "Sharp PC-PJ/AX", | |
2105 | { DMI_MATCH(DMI_SYS_VENDOR, "SHARP"), | |
2106 | DMI_MATCH(DMI_PRODUCT_NAME, "PC-PJ/AX"), | |
2107 | DMI_MATCH(DMI_BIOS_VENDOR,"SystemSoft"), | |
2108 | DMI_MATCH(DMI_BIOS_VERSION,"Version R2.08"), }, | |
2109 | }, | |
2110 | { /* APM crashes */ | |
2111 | apm_is_horked, "Dell Inspiron 2500", | |
2112 | { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), | |
2113 | DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 2500"), | |
2114 | DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"), | |
2115 | DMI_MATCH(DMI_BIOS_VERSION,"A11"), }, | |
2116 | }, | |
2117 | { /* APM idle hangs */ | |
2118 | apm_likes_to_melt, "Jabil AMD", | |
2119 | { DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."), | |
2120 | DMI_MATCH(DMI_BIOS_VERSION, "0AASNP06"), }, | |
2121 | }, | |
2122 | { /* APM idle hangs */ | |
2123 | apm_likes_to_melt, "AMI Bios", | |
2124 | { DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."), | |
2125 | DMI_MATCH(DMI_BIOS_VERSION, "0AASNP05"), }, | |
2126 | }, | |
2127 | { /* Handle problems with APM on Sony Vaio PCG-N505X(DE) */ | |
2128 | swab_apm_power_in_minutes, "Sony VAIO", | |
2129 | { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), | |
2130 | DMI_MATCH(DMI_BIOS_VERSION, "R0206H"), | |
2131 | DMI_MATCH(DMI_BIOS_DATE, "08/23/99"), }, | |
2132 | }, | |
2133 | { /* Handle problems with APM on Sony Vaio PCG-N505VX */ | |
2134 | swab_apm_power_in_minutes, "Sony VAIO", | |
2135 | { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), | |
2136 | DMI_MATCH(DMI_BIOS_VERSION, "W2K06H0"), | |
2137 | DMI_MATCH(DMI_BIOS_DATE, "02/03/00"), }, | |
2138 | }, | |
2139 | { /* Handle problems with APM on Sony Vaio PCG-XG29 */ | |
2140 | swab_apm_power_in_minutes, "Sony VAIO", | |
2141 | { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), | |
2142 | DMI_MATCH(DMI_BIOS_VERSION, "R0117A0"), | |
2143 | DMI_MATCH(DMI_BIOS_DATE, "04/25/00"), }, | |
2144 | }, | |
2145 | { /* Handle problems with APM on Sony Vaio PCG-Z600NE */ | |
2146 | swab_apm_power_in_minutes, "Sony VAIO", | |
2147 | { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), | |
2148 | DMI_MATCH(DMI_BIOS_VERSION, "R0121Z1"), | |
2149 | DMI_MATCH(DMI_BIOS_DATE, "05/11/00"), }, | |
2150 | }, | |
2151 | { /* Handle problems with APM on Sony Vaio PCG-Z600NE */ | |
2152 | swab_apm_power_in_minutes, "Sony VAIO", | |
2153 | { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), | |
2154 | DMI_MATCH(DMI_BIOS_VERSION, "WME01Z1"), | |
2155 | DMI_MATCH(DMI_BIOS_DATE, "08/11/00"), }, | |
2156 | }, | |
2157 | { /* Handle problems with APM on Sony Vaio PCG-Z600LEK(DE) */ | |
2158 | swab_apm_power_in_minutes, "Sony VAIO", | |
2159 | { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), | |
2160 | DMI_MATCH(DMI_BIOS_VERSION, "R0206Z3"), | |
2161 | DMI_MATCH(DMI_BIOS_DATE, "12/25/00"), }, | |
2162 | }, | |
2163 | { /* Handle problems with APM on Sony Vaio PCG-Z505LS */ | |
2164 | swab_apm_power_in_minutes, "Sony VAIO", | |
2165 | { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), | |
2166 | DMI_MATCH(DMI_BIOS_VERSION, "R0203D0"), | |
2167 | DMI_MATCH(DMI_BIOS_DATE, "05/12/00"), }, | |
2168 | }, | |
2169 | { /* Handle problems with APM on Sony Vaio PCG-Z505LS */ | |
2170 | swab_apm_power_in_minutes, "Sony VAIO", | |
2171 | { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), | |
2172 | DMI_MATCH(DMI_BIOS_VERSION, "R0203Z3"), | |
2173 | DMI_MATCH(DMI_BIOS_DATE, "08/25/00"), }, | |
2174 | }, | |
2175 | { /* Handle problems with APM on Sony Vaio PCG-Z505LS (with updated BIOS) */ | |
2176 | swab_apm_power_in_minutes, "Sony VAIO", | |
2177 | { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), | |
2178 | DMI_MATCH(DMI_BIOS_VERSION, "R0209Z3"), | |
2179 | DMI_MATCH(DMI_BIOS_DATE, "05/12/01"), }, | |
2180 | }, | |
2181 | { /* Handle problems with APM on Sony Vaio PCG-F104K */ | |
2182 | swab_apm_power_in_minutes, "Sony VAIO", | |
2183 | { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), | |
2184 | DMI_MATCH(DMI_BIOS_VERSION, "R0204K2"), | |
2185 | DMI_MATCH(DMI_BIOS_DATE, "08/28/00"), }, | |
2186 | }, | |
2187 | ||
2188 | { /* Handle problems with APM on Sony Vaio PCG-C1VN/C1VE */ | |
2189 | swab_apm_power_in_minutes, "Sony VAIO", | |
2190 | { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), | |
2191 | DMI_MATCH(DMI_BIOS_VERSION, "R0208P1"), | |
2192 | DMI_MATCH(DMI_BIOS_DATE, "11/09/00"), }, | |
2193 | }, | |
2194 | { /* Handle problems with APM on Sony Vaio PCG-C1VE */ | |
2195 | swab_apm_power_in_minutes, "Sony VAIO", | |
2196 | { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), | |
2197 | DMI_MATCH(DMI_BIOS_VERSION, "R0204P1"), | |
2198 | DMI_MATCH(DMI_BIOS_DATE, "09/12/00"), }, | |
2199 | }, | |
2200 | { /* Handle problems with APM on Sony Vaio PCG-C1VE */ | |
2201 | swab_apm_power_in_minutes, "Sony VAIO", | |
2202 | { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), | |
2203 | DMI_MATCH(DMI_BIOS_VERSION, "WXPO1Z3"), | |
2204 | DMI_MATCH(DMI_BIOS_DATE, "10/26/01"), }, | |
2205 | }, | |
2206 | { /* broken PM poweroff bios */ | |
2207 | set_realmode_power_off, "Award Software v4.60 PGMA", | |
2208 | { DMI_MATCH(DMI_BIOS_VENDOR, "Award Software International, Inc."), | |
2209 | DMI_MATCH(DMI_BIOS_VERSION, "4.60 PGMA"), | |
2210 | DMI_MATCH(DMI_BIOS_DATE, "134526184"), }, | |
2211 | }, | |
2212 | ||
2213 | /* Generic per vendor APM settings */ | |
2214 | ||
2215 | { /* Allow interrupts during suspend on IBM laptops */ | |
2216 | set_apm_ints, "IBM", | |
2217 | { DMI_MATCH(DMI_SYS_VENDOR, "IBM"), }, | |
2218 | }, | |
2219 | ||
2220 | { } | |
2221 | }; | |
2222 | ||
2223 | /* | |
2224 | * Just start the APM thread. We do NOT want to do APM BIOS | |
2225 | * calls from anything but the APM thread, if for no other reason | |
2226 | * than the fact that we don't trust the APM BIOS. This way, | |
2227 | * most common APM BIOS problems that lead to protection errors | |
2228 | * etc will have at least some level of being contained... | |
2229 | * | |
2230 | * In short, if something bad happens, at least we have a choice | |
2231 | * of just killing the apm thread.. | |
2232 | */ | |
2233 | static int __init apm_init(void) | |
2234 | { | |
2235 | struct proc_dir_entry *apm_proc; | |
2236 | int ret; | |
2237 | int i; | |
2238 | ||
2239 | dmi_check_system(apm_dmi_table); | |
2240 | ||
2241 | if (apm_info.bios.version == 0) { | |
2242 | printk(KERN_INFO "apm: BIOS not found.\n"); | |
2243 | return -ENODEV; | |
2244 | } | |
2245 | printk(KERN_INFO | |
2246 | "apm: BIOS version %d.%d Flags 0x%02x (Driver version %s)\n", | |
2247 | ((apm_info.bios.version >> 8) & 0xff), | |
2248 | (apm_info.bios.version & 0xff), | |
2249 | apm_info.bios.flags, | |
2250 | driver_version); | |
2251 | if ((apm_info.bios.flags & APM_32_BIT_SUPPORT) == 0) { | |
2252 | printk(KERN_INFO "apm: no 32 bit BIOS support\n"); | |
2253 | return -ENODEV; | |
2254 | } | |
2255 | ||
2256 | if (allow_ints) | |
2257 | apm_info.allow_ints = 1; | |
2258 | if (broken_psr) | |
2259 | apm_info.get_power_status_broken = 1; | |
2260 | if (realmode_power_off) | |
2261 | apm_info.realmode_power_off = 1; | |
2262 | /* User can override, but default is to trust DMI */ | |
2263 | if (apm_disabled != -1) | |
2264 | apm_info.disabled = apm_disabled; | |
2265 | ||
2266 | /* | |
2267 | * Fix for the Compaq Contura 3/25c which reports BIOS version 0.1 | |
2268 | * but is reportedly a 1.0 BIOS. | |
2269 | */ | |
2270 | if (apm_info.bios.version == 0x001) | |
2271 | apm_info.bios.version = 0x100; | |
2272 | ||
2273 | /* BIOS < 1.2 doesn't set cseg_16_len */ | |
2274 | if (apm_info.bios.version < 0x102) | |
2275 | apm_info.bios.cseg_16_len = 0; /* 64k */ | |
2276 | ||
2277 | if (debug) { | |
2278 | printk(KERN_INFO "apm: entry %x:%lx cseg16 %x dseg %x", | |
2279 | apm_info.bios.cseg, apm_info.bios.offset, | |
2280 | apm_info.bios.cseg_16, apm_info.bios.dseg); | |
2281 | if (apm_info.bios.version > 0x100) | |
2282 | printk(" cseg len %x, dseg len %x", | |
2283 | apm_info.bios.cseg_len, | |
2284 | apm_info.bios.dseg_len); | |
2285 | if (apm_info.bios.version > 0x101) | |
2286 | printk(" cseg16 len %x", apm_info.bios.cseg_16_len); | |
2287 | printk("\n"); | |
2288 | } | |
2289 | ||
2290 | if (apm_info.disabled) { | |
2291 | printk(KERN_NOTICE "apm: disabled on user request.\n"); | |
2292 | return -ENODEV; | |
2293 | } | |
2294 | if ((num_online_cpus() > 1) && !power_off && !smp) { | |
2295 | printk(KERN_NOTICE "apm: disabled - APM is not SMP safe.\n"); | |
2296 | apm_info.disabled = 1; | |
2297 | return -ENODEV; | |
2298 | } | |
2299 | if (PM_IS_ACTIVE()) { | |
2300 | printk(KERN_NOTICE "apm: overridden by ACPI.\n"); | |
2301 | apm_info.disabled = 1; | |
2302 | return -ENODEV; | |
2303 | } | |
2304 | pm_active = 1; | |
2305 | ||
2306 | /* | |
2307 | * Set up a segment that references the real mode segment 0x40 | |
2308 | * that extends up to the end of page zero (that we have reserved). | |
2309 | * This is for buggy BIOS's that refer to (real mode) segment 0x40 | |
2310 | * even though they are called in protected mode. | |
2311 | */ | |
2312 | set_base(bad_bios_desc, __va((unsigned long)0x40 << 4)); | |
2313 | _set_limit((char *)&bad_bios_desc, 4095 - (0x40 << 4)); | |
2314 | ||
2315 | apm_bios_entry.offset = apm_info.bios.offset; | |
2316 | apm_bios_entry.segment = APM_CS; | |
2317 | ||
2318 | for (i = 0; i < NR_CPUS; i++) { | |
251e6912 | 2319 | struct desc_struct *gdt = get_cpu_gdt_table(i); |
7c4cb60e ZA |
2320 | if (!gdt) |
2321 | continue; | |
251e6912 | 2322 | set_base(gdt[APM_CS >> 3], |
1da177e4 | 2323 | __va((unsigned long)apm_info.bios.cseg << 4)); |
251e6912 | 2324 | set_base(gdt[APM_CS_16 >> 3], |
1da177e4 | 2325 | __va((unsigned long)apm_info.bios.cseg_16 << 4)); |
251e6912 | 2326 | set_base(gdt[APM_DS >> 3], |
1da177e4 LT |
2327 | __va((unsigned long)apm_info.bios.dseg << 4)); |
2328 | #ifndef APM_RELAX_SEGMENTS | |
2329 | if (apm_info.bios.version == 0x100) { | |
2330 | #endif | |
2331 | /* For ASUS motherboard, Award BIOS rev 110 (and others?) */ | |
251e6912 | 2332 | _set_limit((char *)&gdt[APM_CS >> 3], 64 * 1024 - 1); |
1da177e4 | 2333 | /* For some unknown machine. */ |
251e6912 | 2334 | _set_limit((char *)&gdt[APM_CS_16 >> 3], 64 * 1024 - 1); |
1da177e4 | 2335 | /* For the DEC Hinote Ultra CT475 (and others?) */ |
251e6912 | 2336 | _set_limit((char *)&gdt[APM_DS >> 3], 64 * 1024 - 1); |
1da177e4 LT |
2337 | #ifndef APM_RELAX_SEGMENTS |
2338 | } else { | |
251e6912 | 2339 | _set_limit((char *)&gdt[APM_CS >> 3], |
1da177e4 | 2340 | (apm_info.bios.cseg_len - 1) & 0xffff); |
251e6912 | 2341 | _set_limit((char *)&gdt[APM_CS_16 >> 3], |
1da177e4 | 2342 | (apm_info.bios.cseg_16_len - 1) & 0xffff); |
251e6912 | 2343 | _set_limit((char *)&gdt[APM_DS >> 3], |
1da177e4 LT |
2344 | (apm_info.bios.dseg_len - 1) & 0xffff); |
2345 | /* workaround for broken BIOSes */ | |
2346 | if (apm_info.bios.cseg_len <= apm_info.bios.offset) | |
251e6912 | 2347 | _set_limit((char *)&gdt[APM_CS >> 3], 64 * 1024 -1); |
1da177e4 LT |
2348 | if (apm_info.bios.dseg_len <= 0x40) { /* 0x40 * 4kB == 64kB */ |
2349 | /* for the BIOS that assumes granularity = 1 */ | |
251e6912 | 2350 | gdt[APM_DS >> 3].b |= 0x800000; |
1da177e4 LT |
2351 | printk(KERN_NOTICE "apm: we set the granularity of dseg.\n"); |
2352 | } | |
2353 | } | |
2354 | #endif | |
2355 | } | |
2356 | ||
2357 | apm_proc = create_proc_info_entry("apm", 0, NULL, apm_get_info); | |
2358 | if (apm_proc) | |
2359 | apm_proc->owner = THIS_MODULE; | |
2360 | ||
2361 | ret = kernel_thread(apm, NULL, CLONE_KERNEL | SIGCHLD); | |
2362 | if (ret < 0) { | |
2363 | printk(KERN_ERR "apm: disabled - Unable to start kernel thread.\n"); | |
2364 | return -ENOMEM; | |
2365 | } | |
2366 | ||
2367 | if (num_online_cpus() > 1 && !smp ) { | |
2368 | printk(KERN_NOTICE | |
2369 | "apm: disabled - APM is not SMP safe (power off active).\n"); | |
2370 | return 0; | |
2371 | } | |
2372 | ||
2373 | misc_register(&apm_device); | |
2374 | ||
2375 | if (HZ != 100) | |
2376 | idle_period = (idle_period * HZ) / 100; | |
2377 | if (idle_threshold < 100) { | |
2378 | original_pm_idle = pm_idle; | |
2379 | pm_idle = apm_cpu_idle; | |
2380 | set_pm_idle = 1; | |
2381 | } | |
2382 | ||
2383 | return 0; | |
2384 | } | |
2385 | ||
2386 | static void __exit apm_exit(void) | |
2387 | { | |
2388 | int error; | |
2389 | ||
2390 | if (set_pm_idle) { | |
2391 | pm_idle = original_pm_idle; | |
2392 | /* | |
2393 | * We are about to unload the current idle thread pm callback | |
2394 | * (pm_idle), Wait for all processors to update cached/local | |
2395 | * copies of pm_idle before proceeding. | |
2396 | */ | |
2397 | cpu_idle_wait(); | |
2398 | } | |
2399 | if (((apm_info.bios.flags & APM_BIOS_DISENGAGED) == 0) | |
2400 | && (apm_info.connection_version > 0x0100)) { | |
2401 | error = apm_engage_power_management(APM_DEVICE_ALL, 0); | |
2402 | if (error) | |
2403 | apm_error("disengage power management", error); | |
2404 | } | |
2405 | misc_deregister(&apm_device); | |
2406 | remove_proc_entry("apm", NULL); | |
2407 | if (power_off) | |
2408 | pm_power_off = NULL; | |
2409 | exit_kapmd = 1; | |
2410 | while (kapmd_running) | |
2411 | schedule(); | |
2412 | pm_active = 0; | |
2413 | } | |
2414 | ||
2415 | module_init(apm_init); | |
2416 | module_exit(apm_exit); | |
2417 | ||
2418 | MODULE_AUTHOR("Stephen Rothwell"); | |
2419 | MODULE_DESCRIPTION("Advanced Power Management"); | |
2420 | MODULE_LICENSE("GPL"); | |
2421 | module_param(debug, bool, 0644); | |
2422 | MODULE_PARM_DESC(debug, "Enable debug mode"); | |
2423 | module_param(power_off, bool, 0444); | |
2424 | MODULE_PARM_DESC(power_off, "Enable power off"); | |
2425 | module_param(bounce_interval, int, 0444); | |
2426 | MODULE_PARM_DESC(bounce_interval, | |
2427 | "Set the number of ticks to ignore suspend bounces"); | |
2428 | module_param(allow_ints, bool, 0444); | |
2429 | MODULE_PARM_DESC(allow_ints, "Allow interrupts during BIOS calls"); | |
2430 | module_param(broken_psr, bool, 0444); | |
2431 | MODULE_PARM_DESC(broken_psr, "BIOS has a broken GetPowerStatus call"); | |
2432 | module_param(realmode_power_off, bool, 0444); | |
2433 | MODULE_PARM_DESC(realmode_power_off, | |
2434 | "Switch to real mode before powering off"); | |
2435 | module_param(idle_threshold, int, 0444); | |
2436 | MODULE_PARM_DESC(idle_threshold, | |
2437 | "System idle percentage above which to make APM BIOS idle calls"); | |
2438 | module_param(idle_period, int, 0444); | |
2439 | MODULE_PARM_DESC(idle_period, | |
2440 | "Period (in sec/100) over which to caculate the idle percentage"); | |
2441 | module_param(smp, bool, 0444); | |
2442 | MODULE_PARM_DESC(smp, | |
2443 | "Set this to enable APM use on an SMP platform. Use with caution on older systems"); | |
2444 | MODULE_ALIAS_MISCDEV(APM_MINOR_DEV); |