Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | config MIPS |
2 | bool | |
3 | default y | |
f8ac0425 | 4 | select HAVE_GENERIC_DMA_COHERENT |
ec7748b5 | 5 | select HAVE_IDE |
42d4b839 | 6 | select HAVE_OPROFILE |
88547001 | 7 | select HAVE_ARCH_KGDB |
1da177e4 LT |
8 | # Horrible source of confusion. Die, die, die ... |
9 | select EMBEDDED | |
8e497117 | 10 | select RTC_LIB if !LEMOTE_FULOONG2E |
1da177e4 | 11 | |
875d43e7 RB |
12 | mainmenu "Linux/MIPS Kernel Configuration" |
13 | ||
1da177e4 LT |
14 | menu "Machine selection" |
15 | ||
5ac6da66 CL |
16 | config ZONE_DMA |
17 | bool | |
5ac6da66 | 18 | |
5e83d430 RB |
19 | choice |
20 | prompt "System type" | |
21 | default SGI_IP22 | |
1da177e4 | 22 | |
c3543e25 YY |
23 | config MACH_ALCHEMY |
24 | bool "Alchemy processor based machines" | |
1b93b3c3 | 25 | select SYS_SUPPORTS_ZBOOT |
1da177e4 | 26 | |
7ca5dc14 FF |
27 | config AR7 |
28 | bool "Texas Instruments AR7" | |
29 | select BOOT_ELF32 | |
30 | select DMA_NONCOHERENT | |
31 | select CEVT_R4K | |
32 | select CSRC_R4K | |
33 | select IRQ_CPU | |
34 | select NO_EXCEPT_FILL | |
35 | select SWAP_IO_SPACE | |
36 | select SYS_HAS_CPU_MIPS32_R1 | |
37 | select SYS_HAS_EARLY_PRINTK | |
38 | select SYS_SUPPORTS_32BIT_KERNEL | |
39 | select SYS_SUPPORTS_LITTLE_ENDIAN | |
1b93b3c3 | 40 | select SYS_SUPPORTS_ZBOOT_UART16550 |
7ca5dc14 FF |
41 | select GENERIC_GPIO |
42 | select GCD | |
43 | select VLYNQ | |
44 | help | |
45 | Support for the Texas Instruments AR7 System-on-a-Chip | |
46 | family: TNETD7100, 7200 and 7300. | |
47 | ||
35189fad | 48 | config BASLER_EXCITE |
be91589e | 49 | bool "Basler eXcite smart camera" |
42f77542 | 50 | select CEVT_R4K |
940f6b48 | 51 | select CSRC_R4K |
35189fad RB |
52 | select DMA_COHERENT |
53 | select HW_HAS_PCI | |
54 | select IRQ_CPU | |
55 | select IRQ_CPU_RM7K | |
56 | select IRQ_CPU_RM9K | |
663c3d90 | 57 | select MIPS_RM9122 |
35189fad RB |
58 | select SYS_HAS_CPU_RM9000 |
59 | select SYS_SUPPORTS_32BIT_KERNEL | |
35189fad RB |
60 | select SYS_SUPPORTS_BIG_ENDIAN |
61 | help | |
62 | The eXcite is a smart camera platform manufactured by | |
be91589e | 63 | Basler Vision Technologies AG. |
35189fad | 64 | |
1c0c13eb AJ |
65 | config BCM47XX |
66 | bool "BCM47XX based boards" | |
42f77542 | 67 | select CEVT_R4K |
940f6b48 | 68 | select CSRC_R4K |
1c0c13eb AJ |
69 | select DMA_NONCOHERENT |
70 | select HW_HAS_PCI | |
71 | select IRQ_CPU | |
72 | select SYS_HAS_CPU_MIPS32_R1 | |
73 | select SYS_SUPPORTS_32BIT_KERNEL | |
74 | select SYS_SUPPORTS_LITTLE_ENDIAN | |
75 | select SSB | |
76 | select SSB_DRIVER_MIPS | |
2f02c15a | 77 | select SSB_DRIVER_EXTIF |
b06f3e19 | 78 | select SSB_EMBEDDED |
2f02c15a | 79 | select SSB_PCICORE_HOSTMODE if PCI |
1c0c13eb | 80 | select GENERIC_GPIO |
25e5fb97 AJ |
81 | select SYS_HAS_EARLY_PRINTK |
82 | select CFE | |
1c0c13eb AJ |
83 | help |
84 | Support for BCM47XX based boards | |
85 | ||
e7300d04 MB |
86 | config BCM63XX |
87 | bool "Broadcom BCM63XX based boards" | |
88 | select CEVT_R4K | |
89 | select CSRC_R4K | |
90 | select DMA_NONCOHERENT | |
91 | select IRQ_CPU | |
92 | select SYS_HAS_CPU_MIPS32_R1 | |
93 | select SYS_SUPPORTS_32BIT_KERNEL | |
94 | select SYS_SUPPORTS_BIG_ENDIAN | |
95 | select SYS_HAS_EARLY_PRINTK | |
96 | select SWAP_IO_SPACE | |
97 | select ARCH_REQUIRE_GPIOLIB | |
98 | help | |
99 | Support for BCM63XX based boards | |
100 | ||
1da177e4 | 101 | config MIPS_COBALT |
3fa986fa | 102 | bool "Cobalt Server" |
42f77542 | 103 | select CEVT_R4K |
940f6b48 | 104 | select CSRC_R4K |
1097c6ac | 105 | select CEVT_GT641XX |
1da177e4 LT |
106 | select DMA_NONCOHERENT |
107 | select HW_HAS_PCI | |
d865bea4 | 108 | select I8253 |
1da177e4 LT |
109 | select I8259 |
110 | select IRQ_CPU | |
d5ab1a69 | 111 | select IRQ_GT641XX |
252161ec | 112 | select PCI_GT64XXX_PCI0 |
e25bfc92 | 113 | select PCI |
7cf8053b | 114 | select SYS_HAS_CPU_NEVADA |
0a22e0d4 | 115 | select SYS_HAS_EARLY_PRINTK |
ed5ba2fb | 116 | select SYS_SUPPORTS_32BIT_KERNEL |
0e8774b6 | 117 | select SYS_SUPPORTS_64BIT_KERNEL |
5e83d430 | 118 | select SYS_SUPPORTS_LITTLE_ENDIAN |
1da177e4 LT |
119 | |
120 | config MACH_DECSTATION | |
3fa986fa | 121 | bool "DECstations" |
1da177e4 | 122 | select BOOT_ELF32 |
6457d9fc | 123 | select CEVT_DS1287 |
42f77542 | 124 | select CEVT_R4K |
4247417d | 125 | select CSRC_IOASIC |
940f6b48 | 126 | select CSRC_R4K |
20d60d99 MR |
127 | select CPU_DADDI_WORKAROUNDS if 64BIT |
128 | select CPU_R4000_WORKAROUNDS if 64BIT | |
129 | select CPU_R4400_WORKAROUNDS if 64BIT | |
1da177e4 | 130 | select DMA_NONCOHERENT |
d388d685 | 131 | select NO_IOPORT |
1da177e4 | 132 | select IRQ_CPU |
7cf8053b RB |
133 | select SYS_HAS_CPU_R3000 |
134 | select SYS_HAS_CPU_R4X00 | |
ed5ba2fb YY |
135 | select SYS_SUPPORTS_32BIT_KERNEL |
136 | select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL | |
5e83d430 | 137 | select SYS_SUPPORTS_LITTLE_ENDIAN |
1723b4a3 AN |
138 | select SYS_SUPPORTS_128HZ |
139 | select SYS_SUPPORTS_256HZ | |
140 | select SYS_SUPPORTS_1024HZ | |
5e83d430 | 141 | help |
1da177e4 LT |
142 | This enables support for DEC's MIPS based workstations. For details |
143 | see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the | |
144 | DECstation porting pages on <http://decstation.unix-ag.org/>. | |
145 | ||
146 | If you have one of the following DECstation Models you definitely | |
147 | want to choose R4xx0 for the CPU Type: | |
148 | ||
9308816c RB |
149 | DECstation 5000/50 |
150 | DECstation 5000/150 | |
151 | DECstation 5000/260 | |
152 | DECsystem 5900/260 | |
1da177e4 LT |
153 | |
154 | otherwise choose R3000. | |
155 | ||
5e83d430 | 156 | config MACH_JAZZ |
3fa986fa | 157 | bool "Jazz family of machines" |
5e83d430 RB |
158 | select ARC |
159 | select ARC32 | |
160 | select ARCH_MAY_HAVE_PC_FDC | |
42f77542 | 161 | select CEVT_R4K |
940f6b48 | 162 | select CSRC_R4K |
e2defae5 | 163 | select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN |
5e83d430 | 164 | select GENERIC_ISA_DMA |
ea202c63 | 165 | select IRQ_CPU |
d865bea4 | 166 | select I8253 |
5e83d430 RB |
167 | select I8259 |
168 | select ISA | |
7cf8053b | 169 | select SYS_HAS_CPU_R4X00 |
5e83d430 RB |
170 | select SYS_SUPPORTS_32BIT_KERNEL |
171 | select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL | |
1723b4a3 | 172 | select SYS_SUPPORTS_100HZ |
1da177e4 | 173 | help |
5e83d430 RB |
174 | This a family of machines based on the MIPS R4030 chipset which was |
175 | used by several vendors to build RISC/os and Windows NT workstations. | |
692105b8 | 176 | Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and |
5e83d430 RB |
177 | Olivetti M700-10 workstations. |
178 | ||
1f21d2bd BM |
179 | config LASAT |
180 | bool "LASAT Networks platforms" | |
42f77542 | 181 | select CEVT_R4K |
940f6b48 | 182 | select CSRC_R4K |
1f21d2bd BM |
183 | select DMA_NONCOHERENT |
184 | select SYS_HAS_EARLY_PRINTK | |
185 | select HW_HAS_PCI | |
a5ccfe5c | 186 | select IRQ_CPU |
1f21d2bd BM |
187 | select PCI_GT64XXX_PCI0 |
188 | select MIPS_NILE4 | |
189 | select R5000_CPU_SCACHE | |
190 | select SYS_HAS_CPU_R5000 | |
191 | select SYS_SUPPORTS_32BIT_KERNEL | |
192 | select SYS_SUPPORTS_64BIT_KERNEL if BROKEN | |
193 | select SYS_SUPPORTS_LITTLE_ENDIAN | |
1f21d2bd | 194 | |
85749d24 WZ |
195 | config MACH_LOONGSON |
196 | bool "Loongson family of machines" | |
1b93b3c3 | 197 | select SYS_SUPPORTS_ZBOOT_UART16550 |
ade299d8 | 198 | help |
85749d24 WZ |
199 | This enables the support of Loongson family of machines. |
200 | ||
201 | Loongson is a family of general-purpose MIPS-compatible CPUs. | |
202 | developed at Institute of Computing Technology (ICT), | |
203 | Chinese Academy of Sciences (CAS) in the People's Republic | |
204 | of China. The chief architect is Professor Weiwu Hu. | |
ade299d8 | 205 | |
1da177e4 | 206 | config MIPS_MALTA |
3fa986fa | 207 | bool "MIPS Malta board" |
61ed242d | 208 | select ARCH_MAY_HAVE_PC_FDC |
1da177e4 | 209 | select BOOT_ELF32 |
fa71c960 | 210 | select BOOT_RAW |
42f77542 | 211 | select CEVT_R4K |
940f6b48 | 212 | select CSRC_R4K |
1da177e4 LT |
213 | select DMA_NONCOHERENT |
214 | select GENERIC_ISA_DMA | |
aa414dff | 215 | select IRQ_CPU |
39b8d525 | 216 | select IRQ_GIC |
1da177e4 | 217 | select HW_HAS_PCI |
d865bea4 | 218 | select I8253 |
1da177e4 | 219 | select I8259 |
5e83d430 RB |
220 | select MIPS_BOARDS_GEN |
221 | select MIPS_BONITO64 | |
9318c51a | 222 | select MIPS_CPU_SCACHE |
252161ec | 223 | select PCI_GT64XXX_PCI0 |
5e83d430 | 224 | select MIPS_MSC |
1da177e4 | 225 | select SWAP_IO_SPACE |
7cf8053b RB |
226 | select SYS_HAS_CPU_MIPS32_R1 |
227 | select SYS_HAS_CPU_MIPS32_R2 | |
228 | select SYS_HAS_CPU_MIPS64_R1 | |
229 | select SYS_HAS_CPU_NEVADA | |
230 | select SYS_HAS_CPU_RM7000 | |
36a88530 | 231 | select SYS_HAS_EARLY_PRINTK |
ed5ba2fb YY |
232 | select SYS_SUPPORTS_32BIT_KERNEL |
233 | select SYS_SUPPORTS_64BIT_KERNEL | |
5e83d430 RB |
234 | select SYS_SUPPORTS_BIG_ENDIAN |
235 | select SYS_SUPPORTS_LITTLE_ENDIAN | |
0365070f | 236 | select SYS_SUPPORTS_MIPS_CMP |
f41ae0b2 | 237 | select SYS_SUPPORTS_MULTITHREADING |
9693a853 | 238 | select SYS_SUPPORTS_SMARTMIPS |
1b93b3c3 | 239 | select SYS_SUPPORTS_ZBOOT |
1da177e4 | 240 | help |
f638d197 | 241 | This enables support for the MIPS Technologies Malta evaluation |
1da177e4 LT |
242 | board. |
243 | ||
5e83d430 | 244 | config MIPS_SIM |
3fa986fa | 245 | bool 'MIPS simulator (MIPSsim)' |
42f77542 | 246 | select CEVT_R4K |
940f6b48 | 247 | select CSRC_R4K |
1da177e4 | 248 | select DMA_NONCOHERENT |
36a88530 | 249 | select SYS_HAS_EARLY_PRINTK |
1da177e4 | 250 | select IRQ_CPU |
9267a30d | 251 | select BOOT_RAW |
7cf8053b RB |
252 | select SYS_HAS_CPU_MIPS32_R1 |
253 | select SYS_HAS_CPU_MIPS32_R2 | |
36a88530 | 254 | select SYS_HAS_EARLY_PRINTK |
ed5ba2fb | 255 | select SYS_SUPPORTS_32BIT_KERNEL |
5e83d430 | 256 | select SYS_SUPPORTS_BIG_ENDIAN |
f6e2373a | 257 | select SYS_SUPPORTS_MULTITHREADING |
5e83d430 | 258 | select SYS_SUPPORTS_LITTLE_ENDIAN |
1da177e4 | 259 | help |
5e83d430 RB |
260 | This option enables support for MIPS Technologies MIPSsim software |
261 | emulator. | |
1da177e4 | 262 | |
a83860c2 RB |
263 | config NEC_MARKEINS |
264 | bool "NEC EMMA2RH Mark-eins board" | |
265 | select SOC_EMMA2RH | |
266 | select HW_HAS_PCI | |
267 | help | |
268 | This enables support for the NEC Electronics Mark-eins boards. | |
ade299d8 | 269 | |
5e83d430 | 270 | config MACH_VR41XX |
74142d65 | 271 | bool "NEC VR4100 series based machines" |
42f77542 | 272 | select CEVT_R4K |
940f6b48 | 273 | select CSRC_R4K |
7cf8053b | 274 | select SYS_HAS_CPU_VR41XX |
27fdd325 | 275 | select ARCH_REQUIRE_GPIOLIB |
5e83d430 | 276 | |
edb6310a DL |
277 | config NXP_STB220 |
278 | bool "NXP STB220 board" | |
279 | select SOC_PNX833X | |
280 | help | |
281 | Support for NXP Semiconductors STB220 Development Board. | |
282 | ||
283 | config NXP_STB225 | |
284 | bool "NXP 225 board" | |
285 | select SOC_PNX833X | |
286 | select SOC_PNX8335 | |
287 | help | |
288 | Support for NXP Semiconductors STB225 Development Board. | |
289 | ||
ade299d8 | 290 | config PNX8550_JBS |
a92b0588 | 291 | bool "NXP PNX8550 based JBS board" |
ade299d8 YY |
292 | select PNX8550 |
293 | select SYS_SUPPORTS_LITTLE_ENDIAN | |
294 | ||
295 | config PNX8550_STB810 | |
a92b0588 | 296 | bool "NXP PNX8550 based STB810 board" |
ade299d8 YY |
297 | select PNX8550 |
298 | select SYS_SUPPORTS_LITTLE_ENDIAN | |
299 | ||
9267a30d MSJ |
300 | config PMC_MSP |
301 | bool "PMC-Sierra MSP chipsets" | |
302 | depends on EXPERIMENTAL | |
303 | select DMA_NONCOHERENT | |
304 | select SWAP_IO_SPACE | |
305 | select NO_EXCEPT_FILL | |
306 | select BOOT_RAW | |
307 | select SYS_HAS_CPU_MIPS32_R1 | |
308 | select SYS_HAS_CPU_MIPS32_R2 | |
309 | select SYS_SUPPORTS_32BIT_KERNEL | |
310 | select SYS_SUPPORTS_BIG_ENDIAN | |
9267a30d MSJ |
311 | select IRQ_CPU |
312 | select SERIAL_8250 | |
313 | select SERIAL_8250_CONSOLE | |
314 | help | |
315 | This adds support for the PMC-Sierra family of Multi-Service | |
316 | Processor System-On-A-Chips. These parts include a number | |
317 | of integrated peripherals, interfaces and DSPs in addition to | |
318 | a variety of MIPS cores. | |
319 | ||
5e83d430 | 320 | config PMC_YOSEMITE |
3fa986fa | 321 | bool "PMC-Sierra Yosemite eval board" |
42f77542 | 322 | select CEVT_R4K |
940f6b48 | 323 | select CSRC_R4K |
5e83d430 RB |
324 | select DMA_COHERENT |
325 | select HW_HAS_PCI | |
326 | select IRQ_CPU | |
327 | select IRQ_CPU_RM7K | |
328 | select IRQ_CPU_RM9K | |
329 | select SWAP_IO_SPACE | |
7cf8053b | 330 | select SYS_HAS_CPU_RM9000 |
36a88530 | 331 | select SYS_HAS_EARLY_PRINTK |
5e83d430 RB |
332 | select SYS_SUPPORTS_32BIT_KERNEL |
333 | select SYS_SUPPORTS_64BIT_KERNEL | |
334 | select SYS_SUPPORTS_BIG_ENDIAN | |
335 | select SYS_SUPPORTS_HIGHMEM | |
e73ea273 | 336 | select SYS_SUPPORTS_SMP |
5e83d430 RB |
337 | help |
338 | Yosemite is an evaluation board for the RM9000x2 processor | |
339 | manufactured by PMC-Sierra. | |
1da177e4 | 340 | |
1da177e4 | 341 | config SGI_IP22 |
3fa986fa | 342 | bool "SGI IP22 (Indy/Indigo2)" |
1da177e4 LT |
343 | select ARC |
344 | select ARC32 | |
345 | select BOOT_ELF32 | |
42f77542 | 346 | select CEVT_R4K |
940f6b48 | 347 | select CSRC_R4K |
e2defae5 | 348 | select DEFAULT_SGI_PARTITION |
1da177e4 | 349 | select DMA_NONCOHERENT |
5e83d430 | 350 | select HW_HAS_EISA |
d865bea4 | 351 | select I8253 |
68de4803 | 352 | select I8259 |
1da177e4 LT |
353 | select IP22_CPU_SCACHE |
354 | select IRQ_CPU | |
aa414dff | 355 | select GENERIC_ISA_DMA_SUPPORT_BROKEN |
e2defae5 TB |
356 | select SGI_HAS_I8042 |
357 | select SGI_HAS_INDYDOG | |
36e5c21d | 358 | select SGI_HAS_HAL2 |
e2defae5 TB |
359 | select SGI_HAS_SEEQ |
360 | select SGI_HAS_WD93 | |
361 | select SGI_HAS_ZILOG | |
1da177e4 | 362 | select SWAP_IO_SPACE |
7cf8053b RB |
363 | select SYS_HAS_CPU_R4X00 |
364 | select SYS_HAS_CPU_R5000 | |
2b5e63f6 MM |
365 | # |
366 | # Disable EARLY_PRINTK for now since it leads to overwritten prom | |
367 | # memory during early boot on some machines. | |
368 | # | |
369 | # See http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20091119164009.GA15038%40deprecation.cyrius.com | |
370 | # for a more details discussion | |
371 | # | |
372 | # select SYS_HAS_EARLY_PRINTK | |
ed5ba2fb YY |
373 | select SYS_SUPPORTS_32BIT_KERNEL |
374 | select SYS_SUPPORTS_64BIT_KERNEL | |
5e83d430 | 375 | select SYS_SUPPORTS_BIG_ENDIAN |
1da177e4 LT |
376 | help |
377 | This are the SGI Indy, Challenge S and Indigo2, as well as certain | |
378 | OEM variants like the Tandem CMN B006S. To compile a Linux kernel | |
379 | that runs on these, say Y here. | |
380 | ||
381 | config SGI_IP27 | |
3fa986fa | 382 | bool "SGI IP27 (Origin200/2000)" |
1da177e4 LT |
383 | select ARC |
384 | select ARC64 | |
5e83d430 | 385 | select BOOT_ELF64 |
e2defae5 | 386 | select DEFAULT_SGI_PARTITION |
634286f1 | 387 | select DMA_COHERENT |
36a88530 | 388 | select SYS_HAS_EARLY_PRINTK |
1da177e4 | 389 | select HW_HAS_PCI |
130e2fb7 | 390 | select NR_CPUS_DEFAULT_64 |
7cf8053b | 391 | select SYS_HAS_CPU_R10000 |
ed5ba2fb | 392 | select SYS_SUPPORTS_64BIT_KERNEL |
5e83d430 | 393 | select SYS_SUPPORTS_BIG_ENDIAN |
d8cb4e11 | 394 | select SYS_SUPPORTS_NUMA |
1a5c5de1 | 395 | select SYS_SUPPORTS_SMP |
1da177e4 LT |
396 | help |
397 | This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics | |
398 | workstations. To compile a Linux kernel that runs on these, say Y | |
399 | here. | |
400 | ||
e2defae5 TB |
401 | config SGI_IP28 |
402 | bool "SGI IP28 (Indigo2 R10k) (EXPERIMENTAL)" | |
403 | depends on EXPERIMENTAL | |
404 | select ARC | |
405 | select ARC64 | |
406 | select BOOT_ELF64 | |
407 | select CEVT_R4K | |
408 | select CSRC_R4K | |
409 | select DEFAULT_SGI_PARTITION | |
410 | select DMA_NONCOHERENT | |
411 | select GENERIC_ISA_DMA_SUPPORT_BROKEN | |
412 | select IRQ_CPU | |
413 | select HW_HAS_EISA | |
414 | select I8253 | |
415 | select I8259 | |
e2defae5 TB |
416 | select SGI_HAS_I8042 |
417 | select SGI_HAS_INDYDOG | |
5b438c44 | 418 | select SGI_HAS_HAL2 |
e2defae5 TB |
419 | select SGI_HAS_SEEQ |
420 | select SGI_HAS_WD93 | |
421 | select SGI_HAS_ZILOG | |
422 | select SWAP_IO_SPACE | |
423 | select SYS_HAS_CPU_R10000 | |
2b5e63f6 MM |
424 | # |
425 | # Disable EARLY_PRINTK for now since it leads to overwritten prom | |
426 | # memory during early boot on some machines. | |
427 | # | |
428 | # See http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20091119164009.GA15038%40deprecation.cyrius.com | |
429 | # for a more details discussion | |
430 | # | |
431 | # select SYS_HAS_EARLY_PRINTK | |
e2defae5 TB |
432 | select SYS_SUPPORTS_64BIT_KERNEL |
433 | select SYS_SUPPORTS_BIG_ENDIAN | |
434 | help | |
435 | This is the SGI Indigo2 with R10000 processor. To compile a Linux | |
436 | kernel that runs on these, say Y here. | |
437 | ||
1da177e4 | 438 | config SGI_IP32 |
cfd2afc0 | 439 | bool "SGI IP32 (O2)" |
1da177e4 LT |
440 | select ARC |
441 | select ARC32 | |
442 | select BOOT_ELF32 | |
42f77542 | 443 | select CEVT_R4K |
940f6b48 | 444 | select CSRC_R4K |
1da177e4 LT |
445 | select DMA_NONCOHERENT |
446 | select HW_HAS_PCI | |
dd67b155 | 447 | select IRQ_CPU |
1da177e4 LT |
448 | select R5000_CPU_SCACHE |
449 | select RM7000_CPU_SCACHE | |
7cf8053b RB |
450 | select SYS_HAS_CPU_R5000 |
451 | select SYS_HAS_CPU_R10000 if BROKEN | |
452 | select SYS_HAS_CPU_RM7000 | |
dd2f18fe | 453 | select SYS_HAS_CPU_NEVADA |
ed5ba2fb | 454 | select SYS_SUPPORTS_64BIT_KERNEL |
23fbee9d | 455 | select SYS_SUPPORTS_BIG_ENDIAN |
23fbee9d | 456 | help |
5e83d430 | 457 | If you want this kernel to run on SGI O2 workstation, say Y here. |
1da177e4 | 458 | |
ade299d8 YY |
459 | config SIBYTE_CRHINE |
460 | bool "Sibyte BCM91120C-CRhine" | |
461 | depends on EXPERIMENTAL | |
9a6dcea1 AI |
462 | select BOOT_ELF32 |
463 | select DMA_COHERENT | |
ade299d8 | 464 | select SIBYTE_BCM1120 |
9a6dcea1 | 465 | select SWAP_IO_SPACE |
7cf8053b | 466 | select SYS_HAS_CPU_SB1 |
9a6dcea1 AI |
467 | select SYS_SUPPORTS_BIG_ENDIAN |
468 | select SYS_SUPPORTS_LITTLE_ENDIAN | |
469 | ||
ade299d8 YY |
470 | config SIBYTE_CARMEL |
471 | bool "Sibyte BCM91120x-Carmel" | |
472 | depends on EXPERIMENTAL | |
5e83d430 | 473 | select BOOT_ELF32 |
1da177e4 | 474 | select DMA_COHERENT |
ade299d8 | 475 | select SIBYTE_BCM1120 |
5e83d430 | 476 | select SWAP_IO_SPACE |
7cf8053b | 477 | select SYS_HAS_CPU_SB1 |
81731f79 | 478 | select SYS_SUPPORTS_BIG_ENDIAN |
5e83d430 | 479 | select SYS_SUPPORTS_LITTLE_ENDIAN |
1da177e4 | 480 | |
ade299d8 YY |
481 | config SIBYTE_CRHONE |
482 | bool "Sibyte BCM91125C-CRhone" | |
5e83d430 RB |
483 | depends on EXPERIMENTAL |
484 | select BOOT_ELF32 | |
485 | select DMA_COHERENT | |
ade299d8 | 486 | select SIBYTE_BCM1125 |
5e83d430 | 487 | select SWAP_IO_SPACE |
7cf8053b | 488 | select SYS_HAS_CPU_SB1 |
5e83d430 | 489 | select SYS_SUPPORTS_BIG_ENDIAN |
ade299d8 | 490 | select SYS_SUPPORTS_HIGHMEM |
5e83d430 | 491 | select SYS_SUPPORTS_LITTLE_ENDIAN |
1da177e4 | 492 | |
5e83d430 | 493 | config SIBYTE_RHONE |
3fa986fa | 494 | bool "Sibyte BCM91125E-Rhone" |
5e83d430 RB |
495 | depends on EXPERIMENTAL |
496 | select BOOT_ELF32 | |
497 | select DMA_COHERENT | |
498 | select SIBYTE_BCM1125H | |
499 | select SWAP_IO_SPACE | |
7cf8053b | 500 | select SYS_HAS_CPU_SB1 |
5e83d430 RB |
501 | select SYS_SUPPORTS_BIG_ENDIAN |
502 | select SYS_SUPPORTS_LITTLE_ENDIAN | |
1da177e4 | 503 | |
ade299d8 YY |
504 | config SIBYTE_SWARM |
505 | bool "Sibyte BCM91250A-SWARM" | |
5e83d430 | 506 | select BOOT_ELF32 |
26a940e2 | 507 | select DMA_COHERENT |
ade299d8 YY |
508 | select NR_CPUS_DEFAULT_2 |
509 | select SIBYTE_SB1250 | |
5e83d430 | 510 | select SWAP_IO_SPACE |
7cf8053b | 511 | select SYS_HAS_CPU_SB1 |
5e83d430 | 512 | select SYS_SUPPORTS_BIG_ENDIAN |
ade299d8 | 513 | select SYS_SUPPORTS_HIGHMEM |
e3ad1c23 | 514 | select SYS_SUPPORTS_LITTLE_ENDIAN |
cce335ae | 515 | select ZONE_DMA32 if 64BIT |
e3ad1c23 | 516 | |
ade299d8 YY |
517 | config SIBYTE_LITTLESUR |
518 | bool "Sibyte BCM91250C2-LittleSur" | |
5e83d430 RB |
519 | depends on EXPERIMENTAL |
520 | select BOOT_ELF32 | |
521 | select DMA_COHERENT | |
130e2fb7 | 522 | select NR_CPUS_DEFAULT_2 |
5e83d430 RB |
523 | select SIBYTE_SB1250 |
524 | select SWAP_IO_SPACE | |
7cf8053b | 525 | select SYS_HAS_CPU_SB1 |
5e83d430 RB |
526 | select SYS_SUPPORTS_BIG_ENDIAN |
527 | select SYS_SUPPORTS_HIGHMEM | |
528 | select SYS_SUPPORTS_LITTLE_ENDIAN | |
1da177e4 | 529 | |
ade299d8 YY |
530 | config SIBYTE_SENTOSA |
531 | bool "Sibyte BCM91250E-Sentosa" | |
5e83d430 RB |
532 | depends on EXPERIMENTAL |
533 | select BOOT_ELF32 | |
534 | select DMA_COHERENT | |
130e2fb7 | 535 | select NR_CPUS_DEFAULT_2 |
5e83d430 RB |
536 | select SIBYTE_SB1250 |
537 | select SWAP_IO_SPACE | |
7cf8053b | 538 | select SYS_HAS_CPU_SB1 |
5e83d430 | 539 | select SYS_SUPPORTS_BIG_ENDIAN |
5e83d430 | 540 | select SYS_SUPPORTS_LITTLE_ENDIAN |
1da177e4 | 541 | |
ade299d8 YY |
542 | config SIBYTE_BIGSUR |
543 | bool "Sibyte BCM91480B-BigSur" | |
5e83d430 RB |
544 | select BOOT_ELF32 |
545 | select DMA_COHERENT | |
ade299d8 | 546 | select NR_CPUS_DEFAULT_4 |
ade299d8 | 547 | select SIBYTE_BCM1x80 |
5e83d430 | 548 | select SWAP_IO_SPACE |
7cf8053b | 549 | select SYS_HAS_CPU_SB1 |
5e83d430 | 550 | select SYS_SUPPORTS_BIG_ENDIAN |
651194f8 | 551 | select SYS_SUPPORTS_HIGHMEM |
5e83d430 | 552 | select SYS_SUPPORTS_LITTLE_ENDIAN |
cce335ae | 553 | select ZONE_DMA32 if 64BIT |
1da177e4 | 554 | |
14b36af4 TB |
555 | config SNI_RM |
556 | bool "SNI RM200/300/400" | |
4a0312fc TB |
557 | select ARC if CPU_LITTLE_ENDIAN |
558 | select ARC32 if CPU_LITTLE_ENDIAN | |
231a35d3 | 559 | select SNIPROM if CPU_BIG_ENDIAN |
61ed242d | 560 | select ARCH_MAY_HAVE_PC_FDC |
1da177e4 | 561 | select BOOT_ELF32 |
42f77542 | 562 | select CEVT_R4K |
940f6b48 | 563 | select CSRC_R4K |
e2defae5 | 564 | select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN |
1da177e4 LT |
565 | select DMA_NONCOHERENT |
566 | select GENERIC_ISA_DMA | |
5e83d430 | 567 | select HW_HAS_EISA |
1da177e4 | 568 | select HW_HAS_PCI |
c066a32a | 569 | select IRQ_CPU |
d865bea4 | 570 | select I8253 |
1da177e4 LT |
571 | select I8259 |
572 | select ISA | |
4a0312fc | 573 | select SWAP_IO_SPACE if CPU_BIG_ENDIAN |
7cf8053b | 574 | select SYS_HAS_CPU_R4X00 |
4a0312fc | 575 | select SYS_HAS_CPU_R5000 |
c066a32a | 576 | select SYS_HAS_CPU_R10000 |
4a0312fc | 577 | select R5000_CPU_SCACHE |
36a88530 | 578 | select SYS_HAS_EARLY_PRINTK |
ed5ba2fb YY |
579 | select SYS_SUPPORTS_32BIT_KERNEL |
580 | select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL | |
4a0312fc | 581 | select SYS_SUPPORTS_BIG_ENDIAN |
797798c1 | 582 | select SYS_SUPPORTS_HIGHMEM |
5e83d430 | 583 | select SYS_SUPPORTS_LITTLE_ENDIAN |
1da177e4 | 584 | help |
14b36af4 TB |
585 | The SNI RM200/300/400 are MIPS-based machines manufactured by |
586 | Siemens Nixdorf Informationssysteme (SNI), parent company of Pyramid | |
1da177e4 LT |
587 | Technology and now in turn merged with Fujitsu. Say Y here to |
588 | support this machine type. | |
589 | ||
edcaf1a6 AN |
590 | config MACH_TX39XX |
591 | bool "Toshiba TX39 series based machines" | |
5e83d430 | 592 | |
edcaf1a6 AN |
593 | config MACH_TX49XX |
594 | bool "Toshiba TX49 series based machines" | |
5e83d430 | 595 | |
73b4390f RB |
596 | config MIKROTIK_RB532 |
597 | bool "Mikrotik RB532 boards" | |
598 | select CEVT_R4K | |
599 | select CSRC_R4K | |
600 | select DMA_NONCOHERENT | |
73b4390f RB |
601 | select HW_HAS_PCI |
602 | select IRQ_CPU | |
603 | select SYS_HAS_CPU_MIPS32_R1 | |
604 | select SYS_SUPPORTS_32BIT_KERNEL | |
605 | select SYS_SUPPORTS_LITTLE_ENDIAN | |
606 | select SWAP_IO_SPACE | |
607 | select BOOT_RAW | |
d888e25b | 608 | select ARCH_REQUIRE_GPIOLIB |
73b4390f RB |
609 | help |
610 | Support the Mikrotik(tm) RouterBoard 532 series, | |
611 | based on the IDT RC32434 SoC. | |
612 | ||
ade299d8 YY |
613 | config WR_PPMC |
614 | bool "Wind River PPMC board" | |
42f77542 | 615 | select CEVT_R4K |
940f6b48 | 616 | select CSRC_R4K |
ade299d8 YY |
617 | select IRQ_CPU |
618 | select BOOT_ELF32 | |
619 | select DMA_NONCOHERENT | |
620 | select HW_HAS_PCI | |
621 | select PCI_GT64XXX_PCI0 | |
622 | select SWAP_IO_SPACE | |
623 | select SYS_HAS_CPU_MIPS32_R1 | |
624 | select SYS_HAS_CPU_MIPS32_R2 | |
625 | select SYS_HAS_CPU_MIPS64_R1 | |
626 | select SYS_HAS_CPU_NEVADA | |
627 | select SYS_HAS_CPU_RM7000 | |
628 | select SYS_SUPPORTS_32BIT_KERNEL | |
629 | select SYS_SUPPORTS_64BIT_KERNEL | |
630 | select SYS_SUPPORTS_BIG_ENDIAN | |
631 | select SYS_SUPPORTS_LITTLE_ENDIAN | |
632 | help | |
633 | This enables support for the Wind River MIPS32 4KC PPMC evaluation | |
634 | board, which is based on GT64120 bridge chip. | |
635 | ||
a86c7f72 | 636 | config CAVIUM_OCTEON_SIMULATOR |
c9d89d97 | 637 | bool "Cavium Networks Octeon Simulator" |
a86c7f72 DD |
638 | select CEVT_R4K |
639 | select 64BIT_PHYS_ADDR | |
640 | select DMA_COHERENT | |
641 | select SYS_SUPPORTS_64BIT_KERNEL | |
642 | select SYS_SUPPORTS_BIG_ENDIAN | |
643 | select SYS_SUPPORTS_HIGHMEM | |
773cb77d | 644 | select SYS_SUPPORTS_HOTPLUG_CPU |
5e683389 | 645 | select SYS_HAS_CPU_CAVIUM_OCTEON |
a86c7f72 DD |
646 | help |
647 | The Octeon simulator is software performance model of the Cavium | |
648 | Octeon Processor. It supports simulating Octeon processors on x86 | |
649 | hardware. | |
650 | ||
651 | config CAVIUM_OCTEON_REFERENCE_BOARD | |
c9d89d97 | 652 | bool "Cavium Networks Octeon reference board" |
a86c7f72 DD |
653 | select CEVT_R4K |
654 | select 64BIT_PHYS_ADDR | |
655 | select DMA_COHERENT | |
656 | select SYS_SUPPORTS_64BIT_KERNEL | |
657 | select SYS_SUPPORTS_BIG_ENDIAN | |
658 | select SYS_SUPPORTS_HIGHMEM | |
773cb77d | 659 | select SYS_SUPPORTS_HOTPLUG_CPU |
a86c7f72 | 660 | select SYS_HAS_EARLY_PRINTK |
5e683389 | 661 | select SYS_HAS_CPU_CAVIUM_OCTEON |
a86c7f72 | 662 | select SWAP_IO_SPACE |
e8635b48 DD |
663 | select HW_HAS_PCI |
664 | select ARCH_SUPPORTS_MSI | |
a86c7f72 DD |
665 | help |
666 | This option supports all of the Octeon reference boards from Cavium | |
667 | Networks. It builds a kernel that dynamically determines the Octeon | |
668 | CPU type and supports all known board reference implementations. | |
669 | Some of the supported boards are: | |
670 | EBT3000 | |
671 | EBH3000 | |
672 | EBH3100 | |
673 | Thunder | |
674 | Kodama | |
675 | Hikari | |
676 | Say Y here for most Octeon reference boards. | |
677 | ||
5e83d430 | 678 | endchoice |
1da177e4 | 679 | |
e8c7c482 | 680 | source "arch/mips/alchemy/Kconfig" |
9c746edb | 681 | source "arch/mips/basler/excite/Kconfig" |
e7300d04 | 682 | source "arch/mips/bcm63xx/Kconfig" |
5e83d430 | 683 | source "arch/mips/jazz/Kconfig" |
1f21d2bd | 684 | source "arch/mips/lasat/Kconfig" |
5e83d430 | 685 | source "arch/mips/pmc-sierra/Kconfig" |
29c48699 | 686 | source "arch/mips/sgi-ip27/Kconfig" |
38b18f72 | 687 | source "arch/mips/sibyte/Kconfig" |
22b1d707 | 688 | source "arch/mips/txx9/Kconfig" |
5e83d430 | 689 | source "arch/mips/vr41xx/Kconfig" |
a86c7f72 | 690 | source "arch/mips/cavium-octeon/Kconfig" |
85749d24 | 691 | source "arch/mips/loongson/Kconfig" |
38b18f72 | 692 | |
5e83d430 RB |
693 | endmenu |
694 | ||
1da177e4 LT |
695 | config RWSEM_GENERIC_SPINLOCK |
696 | bool | |
697 | default y | |
698 | ||
699 | config RWSEM_XCHGADD_ALGORITHM | |
700 | bool | |
701 | ||
f0d1b0b3 DH |
702 | config ARCH_HAS_ILOG2_U32 |
703 | bool | |
704 | default n | |
705 | ||
706 | config ARCH_HAS_ILOG2_U64 | |
707 | bool | |
708 | default n | |
709 | ||
00a58253 RB |
710 | config ARCH_SUPPORTS_OPROFILE |
711 | bool | |
712 | default y if !MIPS_MT_SMTC | |
713 | ||
3c9ee7ef AM |
714 | config GENERIC_FIND_NEXT_BIT |
715 | bool | |
716 | default y | |
717 | ||
718 | config GENERIC_HWEIGHT | |
719 | bool | |
720 | default y | |
721 | ||
1da177e4 LT |
722 | config GENERIC_CALIBRATE_DELAY |
723 | bool | |
724 | default y | |
725 | ||
7bcf7717 RB |
726 | config GENERIC_CLOCKEVENTS |
727 | bool | |
728 | default y | |
729 | ||
8db02010 RB |
730 | config GENERIC_TIME |
731 | bool | |
732 | default y | |
733 | ||
f5ff0a28 RB |
734 | config GENERIC_CMOS_UPDATE |
735 | bool | |
736 | default y | |
737 | ||
ae1e9130 | 738 | config SCHED_OMIT_FRAME_POINTER |
1cc89038 AN |
739 | bool |
740 | default y | |
741 | ||
e77c232c | 742 | config GENERIC_HARDIRQS_NO__DO_IRQ |
c87e0909 | 743 | def_bool y |
e77c232c | 744 | |
1da177e4 LT |
745 | # |
746 | # Select some configuration options automatically based on user selections. | |
747 | # | |
748 | config ARC | |
749 | bool | |
1da177e4 | 750 | |
61ed242d RB |
751 | config ARCH_MAY_HAVE_PC_FDC |
752 | bool | |
753 | ||
9267a30d MSJ |
754 | config BOOT_RAW |
755 | bool | |
756 | ||
217dd11e RB |
757 | config CEVT_BCM1480 |
758 | bool | |
759 | ||
6457d9fc YY |
760 | config CEVT_DS1287 |
761 | bool | |
762 | ||
1097c6ac YY |
763 | config CEVT_GT641XX |
764 | bool | |
765 | ||
779e7d41 ML |
766 | config CEVT_R4K_LIB |
767 | bool | |
768 | ||
42f77542 | 769 | config CEVT_R4K |
779e7d41 | 770 | select CEVT_R4K_LIB |
42f77542 RB |
771 | bool |
772 | ||
217dd11e RB |
773 | config CEVT_SB1250 |
774 | bool | |
775 | ||
229f773e AN |
776 | config CEVT_TXX9 |
777 | bool | |
778 | ||
217dd11e RB |
779 | config CSRC_BCM1480 |
780 | bool | |
781 | ||
4247417d YY |
782 | config CSRC_IOASIC |
783 | bool | |
784 | ||
779e7d41 ML |
785 | config CSRC_R4K_LIB |
786 | bool | |
787 | ||
940f6b48 | 788 | config CSRC_R4K |
779e7d41 | 789 | select CSRC_R4K_LIB |
940f6b48 RB |
790 | bool |
791 | ||
217dd11e RB |
792 | config CSRC_SB1250 |
793 | bool | |
794 | ||
a9aec7fe AN |
795 | config GPIO_TXX9 |
796 | select GENERIC_GPIO | |
7444a72e | 797 | select ARCH_REQUIRE_GPIOLIB |
a9aec7fe AN |
798 | bool |
799 | ||
df78b5c8 AJ |
800 | config CFE |
801 | bool | |
802 | ||
4ce588cd | 803 | config DMA_COHERENT |
1da177e4 LT |
804 | bool |
805 | ||
4ce588cd RB |
806 | config DMA_NONCOHERENT |
807 | bool | |
808 | select DMA_NEED_PCI_MAP_STATE | |
809 | ||
810 | config DMA_NEED_PCI_MAP_STATE | |
1da177e4 LT |
811 | bool |
812 | ||
813 | config EARLY_PRINTK | |
36a88530 RB |
814 | bool "Early printk" if EMBEDDED && DEBUG_KERNEL |
815 | depends on SYS_HAS_EARLY_PRINTK | |
816 | default y | |
817 | help | |
818 | This option enables special console drivers which allow the kernel | |
819 | to print messages very early in the bootup process. | |
820 | ||
821 | This is useful for kernel debugging when your machine crashes very | |
490dcc4d RD |
822 | early before the console code is initialized. For normal operation, |
823 | it is not recommended because it looks ugly on some machines and | |
824 | doesn't cooperate with an X server. You should normally say N here, | |
36a88530 RB |
825 | unless you want to debug such a crash. |
826 | ||
827 | config SYS_HAS_EARLY_PRINTK | |
1da177e4 | 828 | bool |
1da177e4 | 829 | |
dbb74540 | 830 | config HOTPLUG_CPU |
1b2bc75c RB |
831 | bool "Support for hot-pluggable CPUs" |
832 | depends on SMP && HOTPLUG && SYS_SUPPORTS_HOTPLUG_CPU | |
833 | help | |
834 | Say Y here to allow turning CPUs off and on. CPUs can be | |
835 | controlled through /sys/devices/system/cpu. | |
836 | (Note: power management support will enable this option | |
837 | automatically on SMP systems. ) | |
838 | Say N if you want to disable CPU hotplug. | |
839 | ||
840 | config SYS_SUPPORTS_HOTPLUG_CPU | |
dbb74540 | 841 | bool |
dbb74540 | 842 | |
1da177e4 LT |
843 | config I8259 |
844 | bool | |
1da177e4 | 845 | |
1da177e4 LT |
846 | config MIPS_BONITO64 |
847 | bool | |
1da177e4 LT |
848 | |
849 | config MIPS_MSC | |
850 | bool | |
1da177e4 | 851 | |
1f21d2bd BM |
852 | config MIPS_NILE4 |
853 | bool | |
854 | ||
1da177e4 LT |
855 | config MIPS_DISABLE_OBSOLETE_IDE |
856 | bool | |
857 | ||
39b8d525 RB |
858 | config SYNC_R4K |
859 | bool | |
860 | ||
d388d685 MR |
861 | config NO_IOPORT |
862 | def_bool n | |
863 | ||
8313da30 RB |
864 | config GENERIC_ISA_DMA |
865 | bool | |
866 | select ZONE_DMA if GENERIC_ISA_DMA_SUPPORT_BROKEN=n | |
867 | ||
aa414dff RB |
868 | config GENERIC_ISA_DMA_SUPPORT_BROKEN |
869 | bool | |
8313da30 | 870 | select GENERIC_ISA_DMA |
aa414dff | 871 | |
09663335 YY |
872 | config GENERIC_GPIO |
873 | bool | |
874 | ||
5e83d430 | 875 | # |
3cb2fccc | 876 | # Endianess selection. Sufficiently obscure so many users don't know what to |
5e83d430 RB |
877 | # answer,so we try hard to limit the available choices. Also the use of a |
878 | # choice statement should be more obvious to the user. | |
879 | # | |
880 | choice | |
881 | prompt "Endianess selection" | |
1da177e4 LT |
882 | help |
883 | Some MIPS machines can be configured for either little or big endian | |
5e83d430 | 884 | byte order. These modes require different kernels and a different |
3cb2fccc | 885 | Linux distribution. In general there is one preferred byteorder for a |
5e83d430 | 886 | particular system but some systems are just as commonly used in the |
3dde6ad8 | 887 | one or the other endianness. |
5e83d430 RB |
888 | |
889 | config CPU_BIG_ENDIAN | |
890 | bool "Big endian" | |
891 | depends on SYS_SUPPORTS_BIG_ENDIAN | |
892 | ||
893 | config CPU_LITTLE_ENDIAN | |
894 | bool "Little endian" | |
895 | depends on SYS_SUPPORTS_LITTLE_ENDIAN | |
896 | help | |
897 | ||
898 | endchoice | |
899 | ||
2116245e RB |
900 | config SYS_SUPPORTS_APM_EMULATION |
901 | bool | |
902 | ||
5e83d430 RB |
903 | config SYS_SUPPORTS_BIG_ENDIAN |
904 | bool | |
905 | ||
906 | config SYS_SUPPORTS_LITTLE_ENDIAN | |
907 | bool | |
1da177e4 | 908 | |
9cffd154 DD |
909 | config SYS_SUPPORTS_HUGETLBFS |
910 | bool | |
911 | depends on CPU_SUPPORTS_HUGEPAGES && 64BIT | |
912 | default y | |
913 | ||
1da177e4 LT |
914 | config IRQ_CPU |
915 | bool | |
916 | ||
917 | config IRQ_CPU_RM7K | |
918 | bool | |
919 | ||
5e83d430 RB |
920 | config IRQ_CPU_RM9K |
921 | bool | |
922 | ||
9267a30d MSJ |
923 | config IRQ_MSP_SLP |
924 | bool | |
925 | ||
926 | config IRQ_MSP_CIC | |
927 | bool | |
928 | ||
8420fd00 AN |
929 | config IRQ_TXX9 |
930 | bool | |
931 | ||
d5ab1a69 YY |
932 | config IRQ_GT641XX |
933 | bool | |
934 | ||
39b8d525 RB |
935 | config IRQ_GIC |
936 | bool | |
937 | ||
a86c7f72 DD |
938 | config IRQ_CPU_OCTEON |
939 | bool | |
940 | ||
1da177e4 LT |
941 | config MIPS_BOARDS_GEN |
942 | bool | |
1da177e4 | 943 | |
252161ec | 944 | config PCI_GT64XXX_PCI0 |
1da177e4 | 945 | bool |
1da177e4 | 946 | |
9267a30d MSJ |
947 | config NO_EXCEPT_FILL |
948 | bool | |
949 | ||
663c3d90 | 950 | config MIPS_RM9122 |
951 | bool | |
952 | select SERIAL_RM9000 | |
663c3d90 | 953 | |
a83860c2 RB |
954 | config SOC_EMMA2RH |
955 | bool | |
956 | select CEVT_R4K | |
957 | select CSRC_R4K | |
958 | select DMA_NONCOHERENT | |
959 | select IRQ_CPU | |
960 | select SWAP_IO_SPACE | |
961 | select SYS_HAS_CPU_R5500 | |
962 | select SYS_SUPPORTS_32BIT_KERNEL | |
963 | select SYS_SUPPORTS_64BIT_KERNEL | |
964 | select SYS_SUPPORTS_BIG_ENDIAN | |
965 | ||
edb6310a DL |
966 | config SOC_PNX833X |
967 | bool | |
968 | select CEVT_R4K | |
969 | select CSRC_R4K | |
970 | select IRQ_CPU | |
971 | select DMA_NONCOHERENT | |
972 | select SYS_HAS_CPU_MIPS32_R2 | |
973 | select SYS_SUPPORTS_32BIT_KERNEL | |
974 | select SYS_SUPPORTS_LITTLE_ENDIAN | |
975 | select SYS_SUPPORTS_BIG_ENDIAN | |
edb6310a DL |
976 | select GENERIC_GPIO |
977 | select CPU_MIPSR2_IRQ_VI | |
978 | ||
979 | config SOC_PNX8335 | |
980 | bool | |
981 | select SOC_PNX833X | |
982 | ||
bdf21b18 PP |
983 | config PNX8550 |
984 | bool | |
985 | select SOC_PNX8550 | |
986 | ||
987 | config SOC_PNX8550 | |
988 | bool | |
bdf21b18 PP |
989 | select DMA_NONCOHERENT |
990 | select HW_HAS_PCI | |
b8c2a77c | 991 | select SYS_HAS_CPU_MIPS32_R1 |
36a88530 | 992 | select SYS_HAS_EARLY_PRINTK |
7cf8053b | 993 | select SYS_SUPPORTS_32BIT_KERNEL |
4ead1681 | 994 | select GENERIC_GPIO |
bdf21b18 | 995 | |
1da177e4 LT |
996 | config SWAP_IO_SPACE |
997 | bool | |
998 | ||
663c3d90 | 999 | config SERIAL_RM9000 |
1000 | bool | |
1001 | ||
e2defae5 TB |
1002 | config SGI_HAS_INDYDOG |
1003 | bool | |
1004 | ||
5b438c44 TB |
1005 | config SGI_HAS_HAL2 |
1006 | bool | |
1007 | ||
e2defae5 TB |
1008 | config SGI_HAS_SEEQ |
1009 | bool | |
1010 | ||
1011 | config SGI_HAS_WD93 | |
1012 | bool | |
1013 | ||
1014 | config SGI_HAS_ZILOG | |
1015 | bool | |
1016 | ||
1017 | config SGI_HAS_I8042 | |
1018 | bool | |
1019 | ||
1020 | config DEFAULT_SGI_PARTITION | |
1021 | bool | |
1022 | ||
5e83d430 RB |
1023 | config ARC32 |
1024 | bool | |
1025 | ||
231a35d3 TB |
1026 | config SNIPROM |
1027 | bool | |
1028 | ||
1da177e4 LT |
1029 | config BOOT_ELF32 |
1030 | bool | |
1da177e4 LT |
1031 | |
1032 | config MIPS_L1_CACHE_SHIFT | |
1033 | int | |
c7088755 | 1034 | default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL |
0db2b74e | 1035 | default "6" if MIPS_CPU_SCACHE |
a86c7f72 | 1036 | default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON |
1da177e4 LT |
1037 | default "5" |
1038 | ||
1da177e4 LT |
1039 | config HAVE_STD_PC_SERIAL_PORT |
1040 | bool | |
1041 | ||
1da177e4 LT |
1042 | config ARC_CONSOLE |
1043 | bool "ARC console support" | |
e2defae5 | 1044 | depends on SGI_IP22 || SGI_IP28 || (SNI_RM && CPU_LITTLE_ENDIAN) |
1da177e4 LT |
1045 | |
1046 | config ARC_MEMORY | |
1047 | bool | |
14b36af4 | 1048 | depends on MACH_JAZZ || SNI_RM || SGI_IP32 |
1da177e4 LT |
1049 | default y |
1050 | ||
1051 | config ARC_PROMLIB | |
1052 | bool | |
e2defae5 | 1053 | depends on MACH_JAZZ || SNI_RM || SGI_IP22 || SGI_IP28 || SGI_IP32 |
1da177e4 LT |
1054 | default y |
1055 | ||
1056 | config ARC64 | |
1057 | bool | |
1da177e4 LT |
1058 | |
1059 | config BOOT_ELF64 | |
1060 | bool | |
1da177e4 | 1061 | |
1da177e4 LT |
1062 | menu "CPU selection" |
1063 | ||
1064 | choice | |
1065 | prompt "CPU type" | |
1066 | default CPU_R4X00 | |
1067 | ||
3702bba5 WZ |
1068 | config CPU_LOONGSON2E |
1069 | bool "Loongson 2E" | |
1070 | depends on SYS_HAS_CPU_LOONGSON2E | |
1071 | select CPU_LOONGSON2 | |
2a21c730 FZ |
1072 | help |
1073 | The Loongson 2E processor implements the MIPS III instruction set | |
1074 | with many extensions. | |
1075 | ||
6e760c8d RB |
1076 | config CPU_MIPS32_R1 |
1077 | bool "MIPS32 Release 1" | |
7cf8053b | 1078 | depends on SYS_HAS_CPU_MIPS32_R1 |
6e760c8d | 1079 | select CPU_HAS_PREFETCH |
797798c1 | 1080 | select CPU_SUPPORTS_32BIT_KERNEL |
ec28f306 | 1081 | select CPU_SUPPORTS_HIGHMEM |
1e5f1caa | 1082 | help |
5e83d430 | 1083 | Choose this option to build a kernel for release 1 or later of the |
1e5f1caa RB |
1084 | MIPS32 architecture. Most modern embedded systems with a 32-bit |
1085 | MIPS processor are based on a MIPS32 processor. If you know the | |
1086 | specific type of processor in your system, choose those that one | |
1087 | otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system. | |
1088 | Release 2 of the MIPS32 architecture is available since several | |
1089 | years so chances are you even have a MIPS32 Release 2 processor | |
1090 | in which case you should choose CPU_MIPS32_R2 instead for better | |
1091 | performance. | |
1092 | ||
1093 | config CPU_MIPS32_R2 | |
1094 | bool "MIPS32 Release 2" | |
7cf8053b | 1095 | depends on SYS_HAS_CPU_MIPS32_R2 |
1e5f1caa | 1096 | select CPU_HAS_PREFETCH |
797798c1 | 1097 | select CPU_SUPPORTS_32BIT_KERNEL |
ec28f306 | 1098 | select CPU_SUPPORTS_HIGHMEM |
6e760c8d | 1099 | help |
5e83d430 | 1100 | Choose this option to build a kernel for release 2 or later of the |
6e760c8d RB |
1101 | MIPS32 architecture. Most modern embedded systems with a 32-bit |
1102 | MIPS processor are based on a MIPS32 processor. If you know the | |
1103 | specific type of processor in your system, choose those that one | |
1104 | otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system. | |
1105 | ||
1106 | config CPU_MIPS64_R1 | |
1107 | bool "MIPS64 Release 1" | |
7cf8053b | 1108 | depends on SYS_HAS_CPU_MIPS64_R1 |
797798c1 | 1109 | select CPU_HAS_PREFETCH |
ed5ba2fb YY |
1110 | select CPU_SUPPORTS_32BIT_KERNEL |
1111 | select CPU_SUPPORTS_64BIT_KERNEL | |
ec28f306 | 1112 | select CPU_SUPPORTS_HIGHMEM |
9cffd154 | 1113 | select CPU_SUPPORTS_HUGEPAGES |
6e760c8d RB |
1114 | help |
1115 | Choose this option to build a kernel for release 1 or later of the | |
1116 | MIPS64 architecture. Many modern embedded systems with a 64-bit | |
1117 | MIPS processor are based on a MIPS64 processor. If you know the | |
1118 | specific type of processor in your system, choose those that one | |
1119 | otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system. | |
1e5f1caa RB |
1120 | Release 2 of the MIPS64 architecture is available since several |
1121 | years so chances are you even have a MIPS64 Release 2 processor | |
1122 | in which case you should choose CPU_MIPS64_R2 instead for better | |
1123 | performance. | |
1124 | ||
1125 | config CPU_MIPS64_R2 | |
1126 | bool "MIPS64 Release 2" | |
7cf8053b | 1127 | depends on SYS_HAS_CPU_MIPS64_R2 |
797798c1 | 1128 | select CPU_HAS_PREFETCH |
1e5f1caa RB |
1129 | select CPU_SUPPORTS_32BIT_KERNEL |
1130 | select CPU_SUPPORTS_64BIT_KERNEL | |
ec28f306 | 1131 | select CPU_SUPPORTS_HIGHMEM |
9cffd154 | 1132 | select CPU_SUPPORTS_HUGEPAGES |
1e5f1caa RB |
1133 | help |
1134 | Choose this option to build a kernel for release 2 or later of the | |
1135 | MIPS64 architecture. Many modern embedded systems with a 64-bit | |
1136 | MIPS processor are based on a MIPS64 processor. If you know the | |
1137 | specific type of processor in your system, choose those that one | |
1138 | otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system. | |
1da177e4 LT |
1139 | |
1140 | config CPU_R3000 | |
1141 | bool "R3000" | |
7cf8053b | 1142 | depends on SYS_HAS_CPU_R3000 |
f7062ddb | 1143 | select CPU_HAS_WB |
ed5ba2fb | 1144 | select CPU_SUPPORTS_32BIT_KERNEL |
797798c1 | 1145 | select CPU_SUPPORTS_HIGHMEM |
1da177e4 LT |
1146 | help |
1147 | Please make sure to pick the right CPU type. Linux/MIPS is not | |
1148 | designed to be generic, i.e. Kernels compiled for R3000 CPUs will | |
1149 | *not* work on R4000 machines and vice versa. However, since most | |
1150 | of the supported machines have an R4000 (or similar) CPU, R4x00 | |
1151 | might be a safe bet. If the resulting kernel does not work, | |
1152 | try to recompile with R3000. | |
1153 | ||
1154 | config CPU_TX39XX | |
1155 | bool "R39XX" | |
7cf8053b | 1156 | depends on SYS_HAS_CPU_TX39XX |
ed5ba2fb | 1157 | select CPU_SUPPORTS_32BIT_KERNEL |
1da177e4 LT |
1158 | |
1159 | config CPU_VR41XX | |
1160 | bool "R41xx" | |
7cf8053b | 1161 | depends on SYS_HAS_CPU_VR41XX |
ed5ba2fb YY |
1162 | select CPU_SUPPORTS_32BIT_KERNEL |
1163 | select CPU_SUPPORTS_64BIT_KERNEL | |
1da177e4 | 1164 | help |
5e83d430 | 1165 | The options selects support for the NEC VR4100 series of processors. |
1da177e4 LT |
1166 | Only choose this option if you have one of these processors as a |
1167 | kernel built with this option will not run on any other type of | |
1168 | processor or vice versa. | |
1169 | ||
1170 | config CPU_R4300 | |
1171 | bool "R4300" | |
7cf8053b | 1172 | depends on SYS_HAS_CPU_R4300 |
ed5ba2fb YY |
1173 | select CPU_SUPPORTS_32BIT_KERNEL |
1174 | select CPU_SUPPORTS_64BIT_KERNEL | |
1da177e4 LT |
1175 | help |
1176 | MIPS Technologies R4300-series processors. | |
1177 | ||
1178 | config CPU_R4X00 | |
1179 | bool "R4x00" | |
7cf8053b | 1180 | depends on SYS_HAS_CPU_R4X00 |
ed5ba2fb YY |
1181 | select CPU_SUPPORTS_32BIT_KERNEL |
1182 | select CPU_SUPPORTS_64BIT_KERNEL | |
1da177e4 LT |
1183 | help |
1184 | MIPS Technologies R4000-series processors other than 4300, including | |
1185 | the R4000, R4400, R4600, and 4700. | |
1186 | ||
1187 | config CPU_TX49XX | |
1188 | bool "R49XX" | |
7cf8053b | 1189 | depends on SYS_HAS_CPU_TX49XX |
de862b48 | 1190 | select CPU_HAS_PREFETCH |
ed5ba2fb YY |
1191 | select CPU_SUPPORTS_32BIT_KERNEL |
1192 | select CPU_SUPPORTS_64BIT_KERNEL | |
1da177e4 LT |
1193 | |
1194 | config CPU_R5000 | |
1195 | bool "R5000" | |
7cf8053b | 1196 | depends on SYS_HAS_CPU_R5000 |
ed5ba2fb YY |
1197 | select CPU_SUPPORTS_32BIT_KERNEL |
1198 | select CPU_SUPPORTS_64BIT_KERNEL | |
1da177e4 LT |
1199 | help |
1200 | MIPS Technologies R5000-series processors other than the Nevada. | |
1201 | ||
1202 | config CPU_R5432 | |
1203 | bool "R5432" | |
7cf8053b | 1204 | depends on SYS_HAS_CPU_R5432 |
5e83d430 RB |
1205 | select CPU_SUPPORTS_32BIT_KERNEL |
1206 | select CPU_SUPPORTS_64BIT_KERNEL | |
1da177e4 | 1207 | |
542c1020 SK |
1208 | config CPU_R5500 |
1209 | bool "R5500" | |
1210 | depends on SYS_HAS_CPU_R5500 | |
542c1020 SK |
1211 | select CPU_SUPPORTS_32BIT_KERNEL |
1212 | select CPU_SUPPORTS_64BIT_KERNEL | |
9cffd154 | 1213 | select CPU_SUPPORTS_HUGEPAGES |
542c1020 SK |
1214 | help |
1215 | NEC VR5500 and VR5500A series processors implement 64-bit MIPS IV | |
1216 | instruction set. | |
1217 | ||
1da177e4 LT |
1218 | config CPU_R6000 |
1219 | bool "R6000" | |
ed5ba2fb | 1220 | depends on EXPERIMENTAL |
7cf8053b | 1221 | depends on SYS_HAS_CPU_R6000 |
ed5ba2fb | 1222 | select CPU_SUPPORTS_32BIT_KERNEL |
1da177e4 LT |
1223 | help |
1224 | MIPS Technologies R6000 and R6000A series processors. Note these | |
c09b47d8 | 1225 | processors are extremely rare and the support for them is incomplete. |
1da177e4 LT |
1226 | |
1227 | config CPU_NEVADA | |
1228 | bool "RM52xx" | |
7cf8053b | 1229 | depends on SYS_HAS_CPU_NEVADA |
ed5ba2fb YY |
1230 | select CPU_SUPPORTS_32BIT_KERNEL |
1231 | select CPU_SUPPORTS_64BIT_KERNEL | |
1da177e4 LT |
1232 | help |
1233 | QED / PMC-Sierra RM52xx-series ("Nevada") processors. | |
1234 | ||
1235 | config CPU_R8000 | |
1236 | bool "R8000" | |
ed5ba2fb | 1237 | depends on EXPERIMENTAL |
7cf8053b | 1238 | depends on SYS_HAS_CPU_R8000 |
5e83d430 | 1239 | select CPU_HAS_PREFETCH |
ed5ba2fb | 1240 | select CPU_SUPPORTS_64BIT_KERNEL |
1da177e4 LT |
1241 | help |
1242 | MIPS Technologies R8000 processors. Note these processors are | |
1243 | uncommon and the support for them is incomplete. | |
1244 | ||
1245 | config CPU_R10000 | |
1246 | bool "R10000" | |
7cf8053b | 1247 | depends on SYS_HAS_CPU_R10000 |
5e83d430 | 1248 | select CPU_HAS_PREFETCH |
ed5ba2fb YY |
1249 | select CPU_SUPPORTS_32BIT_KERNEL |
1250 | select CPU_SUPPORTS_64BIT_KERNEL | |
797798c1 | 1251 | select CPU_SUPPORTS_HIGHMEM |
1da177e4 LT |
1252 | help |
1253 | MIPS Technologies R10000-series processors. | |
1254 | ||
1255 | config CPU_RM7000 | |
1256 | bool "RM7000" | |
7cf8053b | 1257 | depends on SYS_HAS_CPU_RM7000 |
5e83d430 | 1258 | select CPU_HAS_PREFETCH |
ed5ba2fb YY |
1259 | select CPU_SUPPORTS_32BIT_KERNEL |
1260 | select CPU_SUPPORTS_64BIT_KERNEL | |
797798c1 | 1261 | select CPU_SUPPORTS_HIGHMEM |
1da177e4 LT |
1262 | |
1263 | config CPU_RM9000 | |
1264 | bool "RM9000" | |
7cf8053b | 1265 | depends on SYS_HAS_CPU_RM9000 |
5e83d430 | 1266 | select CPU_HAS_PREFETCH |
ed5ba2fb YY |
1267 | select CPU_SUPPORTS_32BIT_KERNEL |
1268 | select CPU_SUPPORTS_64BIT_KERNEL | |
797798c1 | 1269 | select CPU_SUPPORTS_HIGHMEM |
0004a9df | 1270 | select WEAK_ORDERING |
1da177e4 LT |
1271 | |
1272 | config CPU_SB1 | |
1273 | bool "SB1" | |
7cf8053b | 1274 | depends on SYS_HAS_CPU_SB1 |
ed5ba2fb YY |
1275 | select CPU_SUPPORTS_32BIT_KERNEL |
1276 | select CPU_SUPPORTS_64BIT_KERNEL | |
797798c1 | 1277 | select CPU_SUPPORTS_HIGHMEM |
0004a9df | 1278 | select WEAK_ORDERING |
1da177e4 | 1279 | |
a86c7f72 DD |
1280 | config CPU_CAVIUM_OCTEON |
1281 | bool "Cavium Octeon processor" | |
5e683389 | 1282 | depends on SYS_HAS_CPU_CAVIUM_OCTEON |
a86c7f72 DD |
1283 | select IRQ_CPU |
1284 | select IRQ_CPU_OCTEON | |
1285 | select CPU_HAS_PREFETCH | |
1286 | select CPU_SUPPORTS_64BIT_KERNEL | |
1287 | select SYS_SUPPORTS_SMP | |
1288 | select NR_CPUS_DEFAULT_16 | |
1289 | select WEAK_ORDERING | |
1290 | select WEAK_REORDERING_BEYOND_LLSC | |
1291 | select CPU_SUPPORTS_HIGHMEM | |
9cffd154 | 1292 | select CPU_SUPPORTS_HUGEPAGES |
a86c7f72 DD |
1293 | help |
1294 | The Cavium Octeon processor is a highly integrated chip containing | |
1295 | many ethernet hardware widgets for networking tasks. The processor | |
1296 | can have up to 16 Mips64v2 cores and 8 integrated gigabit ethernets. | |
1297 | Full details can be found at http://www.caviumnetworks.com. | |
1298 | ||
1da177e4 LT |
1299 | endchoice |
1300 | ||
1b93b3c3 WZ |
1301 | config SYS_SUPPORTS_ZBOOT |
1302 | bool | |
1303 | select HAVE_KERNEL_GZIP | |
1304 | select HAVE_KERNEL_BZIP2 | |
1305 | select HAVE_KERNEL_LZMA | |
1306 | ||
1307 | config SYS_SUPPORTS_ZBOOT_UART16550 | |
1308 | bool | |
1309 | select SYS_SUPPORTS_ZBOOT | |
1310 | ||
3702bba5 WZ |
1311 | config CPU_LOONGSON2 |
1312 | bool | |
1313 | select CPU_SUPPORTS_32BIT_KERNEL | |
1314 | select CPU_SUPPORTS_64BIT_KERNEL | |
1315 | select CPU_SUPPORTS_HIGHMEM | |
1316 | ||
1317 | config SYS_HAS_CPU_LOONGSON2E | |
2a21c730 FZ |
1318 | bool |
1319 | ||
7cf8053b RB |
1320 | config SYS_HAS_CPU_MIPS32_R1 |
1321 | bool | |
1322 | ||
1323 | config SYS_HAS_CPU_MIPS32_R2 | |
1324 | bool | |
1325 | ||
1326 | config SYS_HAS_CPU_MIPS64_R1 | |
1327 | bool | |
1328 | ||
1329 | config SYS_HAS_CPU_MIPS64_R2 | |
1330 | bool | |
1331 | ||
1332 | config SYS_HAS_CPU_R3000 | |
1333 | bool | |
1334 | ||
1335 | config SYS_HAS_CPU_TX39XX | |
1336 | bool | |
1337 | ||
1338 | config SYS_HAS_CPU_VR41XX | |
1339 | bool | |
1340 | ||
1341 | config SYS_HAS_CPU_R4300 | |
1342 | bool | |
1343 | ||
1344 | config SYS_HAS_CPU_R4X00 | |
1345 | bool | |
1346 | ||
1347 | config SYS_HAS_CPU_TX49XX | |
1348 | bool | |
1349 | ||
1350 | config SYS_HAS_CPU_R5000 | |
1351 | bool | |
1352 | ||
1353 | config SYS_HAS_CPU_R5432 | |
1354 | bool | |
1355 | ||
542c1020 SK |
1356 | config SYS_HAS_CPU_R5500 |
1357 | bool | |
1358 | ||
7cf8053b RB |
1359 | config SYS_HAS_CPU_R6000 |
1360 | bool | |
1361 | ||
1362 | config SYS_HAS_CPU_NEVADA | |
1363 | bool | |
1364 | ||
1365 | config SYS_HAS_CPU_R8000 | |
1366 | bool | |
1367 | ||
1368 | config SYS_HAS_CPU_R10000 | |
1369 | bool | |
1370 | ||
1371 | config SYS_HAS_CPU_RM7000 | |
1372 | bool | |
1373 | ||
1374 | config SYS_HAS_CPU_RM9000 | |
1375 | bool | |
1376 | ||
1377 | config SYS_HAS_CPU_SB1 | |
1378 | bool | |
1379 | ||
5e683389 DD |
1380 | config SYS_HAS_CPU_CAVIUM_OCTEON |
1381 | bool | |
1382 | ||
17099b11 RB |
1383 | # |
1384 | # CPU may reorder R->R, R->W, W->R, W->W | |
1385 | # Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC | |
1386 | # | |
0004a9df RB |
1387 | config WEAK_ORDERING |
1388 | bool | |
17099b11 RB |
1389 | |
1390 | # | |
1391 | # CPU may reorder reads and writes beyond LL/SC | |
1392 | # CPU may reorder R->LL, R->LL, W->LL, W->LL, R->SC, R->SC, W->SC, W->SC | |
1393 | # | |
1394 | config WEAK_REORDERING_BEYOND_LLSC | |
1395 | bool | |
5e83d430 RB |
1396 | endmenu |
1397 | ||
1398 | # | |
c09b47d8 | 1399 | # These two indicate any level of the MIPS32 and MIPS64 architecture |
5e83d430 RB |
1400 | # |
1401 | config CPU_MIPS32 | |
1402 | bool | |
1403 | default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 | |
1404 | ||
1405 | config CPU_MIPS64 | |
1406 | bool | |
1407 | default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 | |
1408 | ||
1409 | # | |
c09b47d8 | 1410 | # These two indicate the revision of the architecture, either Release 1 or Release 2 |
5e83d430 RB |
1411 | # |
1412 | config CPU_MIPSR1 | |
1413 | bool | |
1414 | default y if CPU_MIPS32_R1 || CPU_MIPS64_R1 | |
1415 | ||
1416 | config CPU_MIPSR2 | |
1417 | bool | |
a86c7f72 | 1418 | default y if CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_CAVIUM_OCTEON |
5e83d430 RB |
1419 | |
1420 | config SYS_SUPPORTS_32BIT_KERNEL | |
1421 | bool | |
1422 | config SYS_SUPPORTS_64BIT_KERNEL | |
1423 | bool | |
1424 | config CPU_SUPPORTS_32BIT_KERNEL | |
1425 | bool | |
1426 | config CPU_SUPPORTS_64BIT_KERNEL | |
1427 | bool | |
9cffd154 DD |
1428 | config CPU_SUPPORTS_HUGEPAGES |
1429 | bool | |
82622284 DD |
1430 | config MIPS_PGD_C0_CONTEXT |
1431 | bool | |
1432 | default y if 64BIT && CPU_MIPSR2 | |
5e83d430 | 1433 | |
8192c9ea DD |
1434 | # |
1435 | # Set to y for ptrace access to watch registers. | |
1436 | # | |
1437 | config HARDWARE_WATCHPOINTS | |
1438 | bool | |
f839490a | 1439 | default y if CPU_MIPSR1 || CPU_MIPSR2 |
8192c9ea | 1440 | |
5e83d430 RB |
1441 | menu "Kernel type" |
1442 | ||
1443 | choice | |
1444 | ||
1445 | prompt "Kernel code model" | |
1446 | help | |
1447 | You should only select this option if you have a workload that | |
1448 | actually benefits from 64-bit processing or if your machine has | |
1449 | large memory. You will only be presented a single option in this | |
1450 | menu if your system does not support both 32-bit and 64-bit kernels. | |
1451 | ||
1452 | config 32BIT | |
1453 | bool "32-bit kernel" | |
1454 | depends on CPU_SUPPORTS_32BIT_KERNEL && SYS_SUPPORTS_32BIT_KERNEL | |
1455 | select TRAD_SIGNALS | |
1456 | help | |
1457 | Select this option if you want to build a 32-bit kernel. | |
1458 | config 64BIT | |
1459 | bool "64-bit kernel" | |
1460 | depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL | |
dbda6ac0 | 1461 | select HAVE_SYSCALL_WRAPPERS |
5e83d430 RB |
1462 | help |
1463 | Select this option if you want to build a 64-bit kernel. | |
1464 | ||
1465 | endchoice | |
1466 | ||
1da177e4 LT |
1467 | choice |
1468 | prompt "Kernel page size" | |
1469 | default PAGE_SIZE_4KB | |
1470 | ||
1471 | config PAGE_SIZE_4KB | |
1472 | bool "4kB" | |
315fe625 | 1473 | depends on !CPU_LOONGSON2 |
1da177e4 LT |
1474 | help |
1475 | This option select the standard 4kB Linux page size. On some | |
1476 | R3000-family processors this is the only available page size. Using | |
1477 | 4kB page size will minimize memory consumption and is therefore | |
1478 | recommended for low memory systems. | |
1479 | ||
1480 | config PAGE_SIZE_8KB | |
1481 | bool "8kB" | |
c52399be | 1482 | depends on (EXPERIMENTAL && CPU_R8000) || CPU_CAVIUM_OCTEON |
1da177e4 LT |
1483 | help |
1484 | Using 8kB page size will result in higher performance kernel at | |
1485 | the price of higher memory consumption. This option is available | |
c52399be RB |
1486 | only on R8000 and cnMIPS processors. Note that you will need a |
1487 | suitable Linux distribution to support this. | |
1da177e4 LT |
1488 | |
1489 | config PAGE_SIZE_16KB | |
1490 | bool "16kB" | |
714bfad6 | 1491 | depends on !CPU_R3000 && !CPU_TX39XX |
1da177e4 LT |
1492 | help |
1493 | Using 16kB page size will result in higher performance kernel at | |
1494 | the price of higher memory consumption. This option is available on | |
714bfad6 RB |
1495 | all non-R3000 family processors. Note that you will need a suitable |
1496 | Linux distribution to support this. | |
1da177e4 | 1497 | |
c52399be RB |
1498 | config PAGE_SIZE_32KB |
1499 | bool "32kB" | |
1500 | depends on CPU_CAVIUM_OCTEON | |
1501 | help | |
1502 | Using 32kB page size will result in higher performance kernel at | |
1503 | the price of higher memory consumption. This option is available | |
1504 | only on cnMIPS cores. Note that you will need a suitable Linux | |
1505 | distribution to support this. | |
1506 | ||
1da177e4 LT |
1507 | config PAGE_SIZE_64KB |
1508 | bool "64kB" | |
1509 | depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX | |
1510 | help | |
1511 | Using 64kB page size will result in higher performance kernel at | |
1512 | the price of higher memory consumption. This option is available on | |
1513 | all non-R3000 family processor. Not that at the time of this | |
714bfad6 | 1514 | writing this option is still high experimental. |
1da177e4 LT |
1515 | |
1516 | endchoice | |
1517 | ||
1518 | config BOARD_SCACHE | |
1519 | bool | |
1520 | ||
1521 | config IP22_CPU_SCACHE | |
1522 | bool | |
1523 | select BOARD_SCACHE | |
1524 | ||
9318c51a CD |
1525 | # |
1526 | # Support for a MIPS32 / MIPS64 style S-caches | |
1527 | # | |
1528 | config MIPS_CPU_SCACHE | |
1529 | bool | |
1530 | select BOARD_SCACHE | |
1531 | ||
1da177e4 LT |
1532 | config R5000_CPU_SCACHE |
1533 | bool | |
1534 | select BOARD_SCACHE | |
1535 | ||
1536 | config RM7000_CPU_SCACHE | |
1537 | bool | |
1538 | select BOARD_SCACHE | |
1539 | ||
1540 | config SIBYTE_DMA_PAGEOPS | |
1541 | bool "Use DMA to clear/copy pages" | |
1542 | depends on CPU_SB1 | |
1543 | help | |
1544 | Instead of using the CPU to zero and copy pages, use a Data Mover | |
1545 | channel. These DMA channels are otherwise unused by the standard | |
1546 | SiByte Linux port. Seems to give a small performance benefit. | |
1547 | ||
1548 | config CPU_HAS_PREFETCH | |
c8094b53 | 1549 | bool |
1da177e4 | 1550 | |
340ee4b9 RB |
1551 | choice |
1552 | prompt "MIPS MT options" | |
f41ae0b2 RB |
1553 | |
1554 | config MIPS_MT_DISABLED | |
1555 | bool "Disable multithreading support." | |
1556 | help | |
1557 | Use this option if your workload can't take advantage of | |
1558 | MIPS hardware multithreading support. On systems that don't have | |
1559 | the option of an MT-enabled processor this option will be the only | |
1560 | option in this menu. | |
340ee4b9 | 1561 | |
59d6ab86 RB |
1562 | config MIPS_MT_SMP |
1563 | bool "Use 1 TC on each available VPE for SMP" | |
f41ae0b2 | 1564 | depends on SYS_SUPPORTS_MULTITHREADING |
f7062ddb | 1565 | select CPU_MIPSR2_IRQ_VI |
d725cf38 | 1566 | select CPU_MIPSR2_IRQ_EI |
f41ae0b2 | 1567 | select MIPS_MT |
f510aa3b | 1568 | select NR_CPUS_DEFAULT_2 |
41c594ab | 1569 | select SMP |
0ab7aefc | 1570 | select SYS_SUPPORTS_SCHED_SMT if SMP |
73b76c78 | 1571 | select SYS_SUPPORTS_SMP |
87353d8a | 1572 | select SMP_UP |
f41ae0b2 | 1573 | help |
59d6ab86 RB |
1574 | This is a kernel model which is also known a VSMP or lately |
1575 | has been marketesed into SMVP. | |
41c594ab | 1576 | |
59d6ab86 RB |
1577 | config MIPS_MT_SMTC |
1578 | bool "SMTC: Use all TCs on all VPEs for SMP" | |
1579 | depends on CPU_MIPS32_R2 | |
1580 | #depends on CPU_MIPS64_R2 # once there is hardware ... | |
f41ae0b2 RB |
1581 | depends on SYS_SUPPORTS_MULTITHREADING |
1582 | select CPU_MIPSR2_IRQ_VI | |
d725cf38 | 1583 | select CPU_MIPSR2_IRQ_EI |
f41ae0b2 | 1584 | select MIPS_MT |
130e2fb7 | 1585 | select NR_CPUS_DEFAULT_8 |
340ee4b9 | 1586 | select SMP |
73b76c78 | 1587 | select SYS_SUPPORTS_SMP |
87353d8a | 1588 | select SMP_UP |
f41ae0b2 | 1589 | help |
59d6ab86 RB |
1590 | This is a kernel model which is known a SMTC or lately has been |
1591 | marketesed into SMVP. | |
340ee4b9 | 1592 | |
340ee4b9 RB |
1593 | endchoice |
1594 | ||
f41ae0b2 RB |
1595 | config MIPS_MT |
1596 | bool | |
1597 | ||
0ab7aefc RB |
1598 | config SCHED_SMT |
1599 | bool "SMT (multithreading) scheduler support" | |
1600 | depends on SYS_SUPPORTS_SCHED_SMT | |
1601 | default n | |
1602 | help | |
1603 | SMT scheduler support improves the CPU scheduler's decision making | |
1604 | when dealing with MIPS MT enabled cores at a cost of slightly | |
1605 | increased overhead in some places. If unsure say N here. | |
1606 | ||
1607 | config SYS_SUPPORTS_SCHED_SMT | |
1608 | bool | |
1609 | ||
1610 | ||
f41ae0b2 RB |
1611 | config SYS_SUPPORTS_MULTITHREADING |
1612 | bool | |
1613 | ||
f088fc84 RB |
1614 | config MIPS_MT_FPAFF |
1615 | bool "Dynamic FPU affinity for FP-intensive threads" | |
f088fc84 | 1616 | default y |
07cc0c9e RB |
1617 | depends on MIPS_MT_SMP || MIPS_MT_SMTC |
1618 | ||
1619 | config MIPS_VPE_LOADER | |
1620 | bool "VPE loader support." | |
1621 | depends on SYS_SUPPORTS_MULTITHREADING | |
1622 | select CPU_MIPSR2_IRQ_VI | |
1623 | select CPU_MIPSR2_IRQ_EI | |
07cc0c9e RB |
1624 | select MIPS_MT |
1625 | help | |
1626 | Includes a loader for loading an elf relocatable object | |
1627 | onto another VPE and running it. | |
f088fc84 | 1628 | |
0db34215 KK |
1629 | config MIPS_MT_SMTC_IM_BACKSTOP |
1630 | bool "Use per-TC register bits as backstop for inhibited IM bits" | |
1631 | depends on MIPS_MT_SMTC | |
8531a35e | 1632 | default n |
0db34215 KK |
1633 | help |
1634 | To support multiple TC microthreads acting as "CPUs" within | |
1635 | a VPE, VPE-wide interrupt mask bits must be specially manipulated | |
1636 | during interrupt handling. To support legacy drivers and interrupt | |
1637 | controller management code, SMTC has a "backstop" to track and | |
1638 | if necessary restore the interrupt mask. This has some performance | |
8531a35e | 1639 | impact on interrupt service overhead. |
0db34215 | 1640 | |
f571eff0 KK |
1641 | config MIPS_MT_SMTC_IRQAFF |
1642 | bool "Support IRQ affinity API" | |
1643 | depends on MIPS_MT_SMTC | |
1644 | default n | |
1645 | help | |
1646 | Enables SMP IRQ affinity API (/proc/irq/*/smp_affinity, etc.) | |
1647 | for SMTC Linux kernel. Requires platform support, of which | |
1648 | an example can be found in the MIPS kernel i8259 and Malta | |
8531a35e KK |
1649 | platform code. Adds some overhead to interrupt dispatch, and |
1650 | should be used only if you know what you are doing. | |
f571eff0 | 1651 | |
e01402b1 RB |
1652 | config MIPS_VPE_LOADER_TOM |
1653 | bool "Load VPE program into memory hidden from linux" | |
1654 | depends on MIPS_VPE_LOADER | |
1655 | default y | |
1656 | help | |
1657 | The loader can use memory that is present but has been hidden from | |
1658 | Linux using the kernel command line option "mem=xxMB". It's up to | |
1659 | you to ensure the amount you put in the option and the space your | |
1660 | program requires is less or equal to the amount physically present. | |
1661 | ||
1662 | # this should possibly be in drivers/char, but it is rather cpu related. Hmmm | |
1663 | config MIPS_VPE_APSP_API | |
5e83d430 RB |
1664 | bool "Enable support for AP/SP API (RTLX)" |
1665 | depends on MIPS_VPE_LOADER | |
1666 | help | |
e01402b1 | 1667 | |
2600990e RB |
1668 | config MIPS_APSP_KSPD |
1669 | bool "Enable KSPD" | |
1670 | depends on MIPS_VPE_APSP_API | |
1671 | default y | |
1672 | help | |
1673 | KSPD is a kernel daemon that accepts syscall requests from the SP | |
1674 | side, actions them and returns the results. It also handles the | |
1675 | "exit" syscall notifying other kernel modules the SP program is | |
1676 | exiting. You probably want to say yes here. | |
1677 | ||
4a16ff4c RB |
1678 | config MIPS_CMP |
1679 | bool "MIPS CMP framework support" | |
1680 | depends on SYS_SUPPORTS_MIPS_CMP | |
eb9b5141 | 1681 | select SYNC_R4K |
4a16ff4c RB |
1682 | select SYS_SUPPORTS_SMP |
1683 | select SYS_SUPPORTS_SCHED_SMT if SMP | |
1684 | select WEAK_ORDERING | |
1685 | default n | |
1686 | help | |
1687 | This is a placeholder option for the GCMP work. It will need to | |
1688 | be handled differently... | |
1689 | ||
1da177e4 LT |
1690 | config SB1_PASS_1_WORKAROUNDS |
1691 | bool | |
1692 | depends on CPU_SB1_PASS_1 | |
1693 | default y | |
1694 | ||
1695 | config SB1_PASS_2_WORKAROUNDS | |
1696 | bool | |
1697 | depends on CPU_SB1 && (CPU_SB1_PASS_2_2 || CPU_SB1_PASS_2) | |
1698 | default y | |
1699 | ||
1700 | config SB1_PASS_2_1_WORKAROUNDS | |
1701 | bool | |
1702 | depends on CPU_SB1 && CPU_SB1_PASS_2 | |
1703 | default y | |
1704 | ||
1705 | config 64BIT_PHYS_ADDR | |
d806cb2b | 1706 | bool |
1da177e4 | 1707 | |
9693a853 FBH |
1708 | config CPU_HAS_SMARTMIPS |
1709 | depends on SYS_SUPPORTS_SMARTMIPS | |
1710 | bool "Support for the SmartMIPS ASE" | |
1711 | help | |
1712 | SmartMIPS is a extension of the MIPS32 architecture aimed at | |
1713 | increased security at both hardware and software level for | |
1714 | smartcards. Enabling this option will allow proper use of the | |
1715 | SmartMIPS instructions by Linux applications. However a kernel with | |
1716 | this option will not work on a MIPS core without SmartMIPS core. If | |
1717 | you don't know you probably don't have SmartMIPS and should say N | |
1718 | here. | |
1719 | ||
1da177e4 | 1720 | config CPU_HAS_WB |
f7062ddb | 1721 | bool |
e01402b1 | 1722 | |
f41ae0b2 RB |
1723 | # |
1724 | # Vectored interrupt mode is an R2 feature | |
1725 | # | |
e01402b1 | 1726 | config CPU_MIPSR2_IRQ_VI |
f41ae0b2 | 1727 | bool |
e01402b1 | 1728 | |
f41ae0b2 RB |
1729 | # |
1730 | # Extended interrupt mode is an R2 feature | |
1731 | # | |
e01402b1 | 1732 | config CPU_MIPSR2_IRQ_EI |
f41ae0b2 | 1733 | bool |
e01402b1 | 1734 | |
1da177e4 LT |
1735 | config CPU_HAS_SYNC |
1736 | bool | |
1737 | depends on !CPU_R3000 | |
1738 | default y | |
1739 | ||
ea580401 RB |
1740 | config GENERIC_CLOCKEVENTS_BROADCAST |
1741 | bool | |
1742 | ||
20d60d99 MR |
1743 | # |
1744 | # CPU non-features | |
1745 | # | |
1746 | config CPU_DADDI_WORKAROUNDS | |
1747 | bool | |
1748 | ||
1749 | config CPU_R4000_WORKAROUNDS | |
1750 | bool | |
1751 | select CPU_R4400_WORKAROUNDS | |
1752 | ||
1753 | config CPU_R4400_WORKAROUNDS | |
1754 | bool | |
1755 | ||
797798c1 RB |
1756 | # |
1757 | # Use the generic interrupt handling code in kernel/irq/: | |
1758 | # | |
1759 | config GENERIC_HARDIRQS | |
1760 | bool | |
1761 | default y | |
1762 | ||
1763 | config GENERIC_IRQ_PROBE | |
1764 | bool | |
1765 | default y | |
1766 | ||
0d7012a9 | 1767 | config IRQ_PER_CPU |
0d7012a9 | 1768 | bool |
0d7012a9 | 1769 | |
1da177e4 LT |
1770 | # |
1771 | # - Highmem only makes sense for the 32-bit kernel. | |
1772 | # - The current highmem code will only work properly on physically indexed | |
1773 | # caches such as R3000, SB1, R7000 or those that look like they're virtually | |
1774 | # indexed such as R4000/R4400 SC and MC versions or R10000. So for the | |
1775 | # moment we protect the user and offer the highmem option only on machines | |
1776 | # where it's known to be safe. This will not offer highmem on a few systems | |
1777 | # such as MIPS32 and MIPS64 CPUs which may have virtual and physically | |
1778 | # indexed CPUs but we're playing safe. | |
797798c1 RB |
1779 | # - We use SYS_SUPPORTS_HIGHMEM to offer highmem only for systems where we |
1780 | # know they might have memory configurations that could make use of highmem | |
1781 | # support. | |
1da177e4 LT |
1782 | # |
1783 | config HIGHMEM | |
1784 | bool "High Memory Support" | |
797798c1 RB |
1785 | depends on 32BIT && CPU_SUPPORTS_HIGHMEM && SYS_SUPPORTS_HIGHMEM |
1786 | ||
1787 | config CPU_SUPPORTS_HIGHMEM | |
1788 | bool | |
1789 | ||
1790 | config SYS_SUPPORTS_HIGHMEM | |
1791 | bool | |
1da177e4 | 1792 | |
9693a853 FBH |
1793 | config SYS_SUPPORTS_SMARTMIPS |
1794 | bool | |
1795 | ||
b4819b59 YY |
1796 | config ARCH_FLATMEM_ENABLE |
1797 | def_bool y | |
f133f22d | 1798 | depends on !NUMA && !CPU_LOONGSON2 |
b4819b59 | 1799 | |
d8cb4e11 RB |
1800 | config ARCH_DISCONTIGMEM_ENABLE |
1801 | bool | |
1802 | default y if SGI_IP27 | |
1803 | help | |
3dde6ad8 | 1804 | Say Y to support efficient handling of discontiguous physical memory, |
d8cb4e11 RB |
1805 | for architectures which are either NUMA (Non-Uniform Memory Access) |
1806 | or have huge holes in the physical address space for other reasons. | |
1807 | See <file:Documentation/vm/numa> for more. | |
1808 | ||
cce335ae RB |
1809 | config ARCH_POPULATES_NODE_MAP |
1810 | def_bool y | |
1811 | ||
31473747 AN |
1812 | config ARCH_SPARSEMEM_ENABLE |
1813 | bool | |
7de58fab | 1814 | select SPARSEMEM_STATIC |
31473747 | 1815 | |
d8cb4e11 RB |
1816 | config NUMA |
1817 | bool "NUMA Support" | |
1818 | depends on SYS_SUPPORTS_NUMA | |
1819 | help | |
1820 | Say Y to compile the kernel to support NUMA (Non-Uniform Memory | |
1821 | Access). This option improves performance on systems with more | |
1822 | than two nodes; on two node systems it is generally better to | |
1823 | leave it disabled; on single node systems disable this option | |
1824 | disabled. | |
1825 | ||
1826 | config SYS_SUPPORTS_NUMA | |
1827 | bool | |
1828 | ||
c80d79d7 YG |
1829 | config NODES_SHIFT |
1830 | int | |
1831 | default "6" | |
1832 | depends on NEED_MULTIPLE_NODES | |
1833 | ||
b4819b59 YY |
1834 | source "mm/Kconfig" |
1835 | ||
1da177e4 LT |
1836 | config SMP |
1837 | bool "Multi-Processing support" | |
e73ea273 | 1838 | depends on SYS_SUPPORTS_SMP |
b4b30a5a | 1839 | select IRQ_PER_CPU |
2f304c0a | 1840 | select USE_GENERIC_SMP_HELPERS |
e73ea273 | 1841 | help |
1da177e4 LT |
1842 | This enables support for systems with more than one CPU. If you have |
1843 | a system with only one CPU, like most personal computers, say N. If | |
1844 | you have a system with more than one CPU, say Y. | |
1845 | ||
1846 | If you say N here, the kernel will run on single and multiprocessor | |
1847 | machines, but will use only one CPU of a multiprocessor machine. If | |
1848 | you say Y here, the kernel will run on many, but not all, | |
1849 | singleprocessor machines. On a singleprocessor machine, the kernel | |
1850 | will run faster if you say N here. | |
1851 | ||
1852 | People using multiprocessor machines who say Y here should also say | |
1853 | Y to "Enhanced Real Time Clock Support", below. | |
1854 | ||
03502faa AB |
1855 | See also the SMP-HOWTO available at |
1856 | <http://www.tldp.org/docs.html#howto>. | |
1da177e4 LT |
1857 | |
1858 | If you don't know what to do here, say N. | |
1859 | ||
87353d8a RB |
1860 | config SMP_UP |
1861 | bool | |
1862 | ||
4a16ff4c RB |
1863 | config SYS_SUPPORTS_MIPS_CMP |
1864 | bool | |
1865 | ||
e73ea273 RB |
1866 | config SYS_SUPPORTS_SMP |
1867 | bool | |
1868 | ||
72ede9b1 AN |
1869 | config NR_CPUS_DEFAULT_1 |
1870 | bool | |
1871 | ||
130e2fb7 RB |
1872 | config NR_CPUS_DEFAULT_2 |
1873 | bool | |
1874 | ||
1875 | config NR_CPUS_DEFAULT_4 | |
1876 | bool | |
1877 | ||
1878 | config NR_CPUS_DEFAULT_8 | |
1879 | bool | |
1880 | ||
1881 | config NR_CPUS_DEFAULT_16 | |
1882 | bool | |
1883 | ||
1884 | config NR_CPUS_DEFAULT_32 | |
1885 | bool | |
1886 | ||
1887 | config NR_CPUS_DEFAULT_64 | |
1888 | bool | |
1889 | ||
1da177e4 LT |
1890 | config NR_CPUS |
1891 | int "Maximum number of CPUs (2-64)" | |
72ede9b1 | 1892 | range 1 64 if NR_CPUS_DEFAULT_1 |
1da177e4 | 1893 | depends on SMP |
72ede9b1 | 1894 | default "1" if NR_CPUS_DEFAULT_1 |
130e2fb7 RB |
1895 | default "2" if NR_CPUS_DEFAULT_2 |
1896 | default "4" if NR_CPUS_DEFAULT_4 | |
1897 | default "8" if NR_CPUS_DEFAULT_8 | |
1898 | default "16" if NR_CPUS_DEFAULT_16 | |
1899 | default "32" if NR_CPUS_DEFAULT_32 | |
1900 | default "64" if NR_CPUS_DEFAULT_64 | |
1da177e4 LT |
1901 | help |
1902 | This allows you to specify the maximum number of CPUs which this | |
1903 | kernel will support. The maximum supported value is 32 for 32-bit | |
1904 | kernel and 64 for 64-bit kernels; the minimum value which makes | |
72ede9b1 AN |
1905 | sense is 1 for Qemu (useful only for kernel debugging purposes) |
1906 | and 2 for all others. | |
1da177e4 LT |
1907 | |
1908 | This is purely to save memory - each supported CPU adds | |
72ede9b1 AN |
1909 | approximately eight kilobytes to the kernel image. For best |
1910 | performance should round up your number of processors to the next | |
1911 | power of two. | |
1da177e4 | 1912 | |
c4eee283 AN |
1913 | source "kernel/time/Kconfig" |
1914 | ||
1723b4a3 AN |
1915 | # |
1916 | # Timer Interrupt Frequency Configuration | |
1917 | # | |
1918 | ||
1919 | choice | |
1920 | prompt "Timer frequency" | |
1921 | default HZ_250 | |
1922 | help | |
1923 | Allows the configuration of the timer frequency. | |
1924 | ||
1925 | config HZ_48 | |
0f873585 | 1926 | bool "48 HZ" if SYS_SUPPORTS_48HZ || SYS_SUPPORTS_ARBIT_HZ |
1723b4a3 AN |
1927 | |
1928 | config HZ_100 | |
1929 | bool "100 HZ" if SYS_SUPPORTS_100HZ || SYS_SUPPORTS_ARBIT_HZ | |
1930 | ||
1931 | config HZ_128 | |
1932 | bool "128 HZ" if SYS_SUPPORTS_128HZ || SYS_SUPPORTS_ARBIT_HZ | |
1933 | ||
1934 | config HZ_250 | |
1935 | bool "250 HZ" if SYS_SUPPORTS_250HZ || SYS_SUPPORTS_ARBIT_HZ | |
1936 | ||
1937 | config HZ_256 | |
1938 | bool "256 HZ" if SYS_SUPPORTS_256HZ || SYS_SUPPORTS_ARBIT_HZ | |
1939 | ||
1940 | config HZ_1000 | |
1941 | bool "1000 HZ" if SYS_SUPPORTS_1000HZ || SYS_SUPPORTS_ARBIT_HZ | |
1942 | ||
1943 | config HZ_1024 | |
1944 | bool "1024 HZ" if SYS_SUPPORTS_1024HZ || SYS_SUPPORTS_ARBIT_HZ | |
1945 | ||
1946 | endchoice | |
1947 | ||
1948 | config SYS_SUPPORTS_48HZ | |
1949 | bool | |
1950 | ||
1951 | config SYS_SUPPORTS_100HZ | |
1952 | bool | |
1953 | ||
1954 | config SYS_SUPPORTS_128HZ | |
1955 | bool | |
1956 | ||
1957 | config SYS_SUPPORTS_250HZ | |
1958 | bool | |
1959 | ||
1960 | config SYS_SUPPORTS_256HZ | |
1961 | bool | |
1962 | ||
1963 | config SYS_SUPPORTS_1000HZ | |
1964 | bool | |
1965 | ||
1966 | config SYS_SUPPORTS_1024HZ | |
1967 | bool | |
1968 | ||
1969 | config SYS_SUPPORTS_ARBIT_HZ | |
1970 | bool | |
1971 | default y if !SYS_SUPPORTS_48HZ && !SYS_SUPPORTS_100HZ && \ | |
1972 | !SYS_SUPPORTS_128HZ && !SYS_SUPPORTS_250HZ && \ | |
1973 | !SYS_SUPPORTS_256HZ && !SYS_SUPPORTS_1000HZ && \ | |
1974 | !SYS_SUPPORTS_1024HZ | |
1975 | ||
1976 | config HZ | |
1977 | int | |
1978 | default 48 if HZ_48 | |
1979 | default 100 if HZ_100 | |
1980 | default 128 if HZ_128 | |
1981 | default 250 if HZ_250 | |
1982 | default 256 if HZ_256 | |
1983 | default 1000 if HZ_1000 | |
1984 | default 1024 if HZ_1024 | |
1985 | ||
e80de850 | 1986 | source "kernel/Kconfig.preempt" |
1da177e4 | 1987 | |
1da177e4 LT |
1988 | config MIPS_INSANE_LARGE |
1989 | bool "Support for large 64-bit configurations" | |
875d43e7 | 1990 | depends on CPU_R10000 && 64BIT |
1da177e4 LT |
1991 | help |
1992 | MIPS R10000 does support a 44 bit / 16TB address space as opposed to | |
1993 | previous 64-bit processors which only supported 40 bit / 1TB. If you | |
1994 | need processes of more than 1TB virtual address space, say Y here. | |
1995 | This will result in additional memory usage, so it is not | |
1996 | recommended for normal users. | |
1997 | ||
ea6e942b AN |
1998 | config KEXEC |
1999 | bool "Kexec system call (EXPERIMENTAL)" | |
2000 | depends on EXPERIMENTAL | |
2001 | help | |
2002 | kexec is a system call that implements the ability to shutdown your | |
2003 | current kernel, and to start another kernel. It is like a reboot | |
3dde6ad8 | 2004 | but it is independent of the system firmware. And like a reboot |
ea6e942b AN |
2005 | you can start any kernel with it, not just Linux. |
2006 | ||
01dd2fbf | 2007 | The name comes from the similarity to the exec system call. |
ea6e942b AN |
2008 | |
2009 | It is an ongoing process to be certain the hardware in a machine | |
2010 | is properly shutdown, so do not be surprised if this code does not | |
2011 | initially work for you. It may help to enable device hotplugging | |
2012 | support. As of this writing the exact hardware interface is | |
2013 | strongly in flux, so no good recommendation can be made. | |
2014 | ||
2015 | config SECCOMP | |
2016 | bool "Enable seccomp to safely compute untrusted bytecode" | |
293c5bd1 | 2017 | depends on PROC_FS |
ea6e942b AN |
2018 | default y |
2019 | help | |
2020 | This kernel feature is useful for number crunching applications | |
2021 | that may need to compute untrusted bytecode during their | |
2022 | execution. By using pipes or other transports made available to | |
2023 | the process as file descriptors supporting the read/write | |
2024 | syscalls, it's possible to isolate those applications in | |
2025 | their own address space using seccomp. Once seccomp is | |
2026 | enabled via /proc/<pid>/seccomp, it cannot be disabled | |
2027 | and the task is only allowed to execute a few safe syscalls | |
2028 | defined by each seccomp mode. | |
2029 | ||
2030 | If unsure, say Y. Only embedded should say N here. | |
2031 | ||
5e83d430 RB |
2032 | endmenu |
2033 | ||
1df0f0ff AN |
2034 | config LOCKDEP_SUPPORT |
2035 | bool | |
2036 | default y | |
2037 | ||
2038 | config STACKTRACE_SUPPORT | |
2039 | bool | |
2040 | default y | |
2041 | ||
b6c3539b RB |
2042 | source "init/Kconfig" |
2043 | ||
dc52ddc0 MH |
2044 | source "kernel/Kconfig.freezer" |
2045 | ||
1da177e4 LT |
2046 | menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)" |
2047 | ||
5e83d430 RB |
2048 | config HW_HAS_EISA |
2049 | bool | |
1da177e4 LT |
2050 | config HW_HAS_PCI |
2051 | bool | |
2052 | ||
2053 | config PCI | |
2054 | bool "Support for PCI controller" | |
2055 | depends on HW_HAS_PCI | |
abb4ae46 | 2056 | select PCI_DOMAINS |
1da177e4 LT |
2057 | help |
2058 | Find out whether you have a PCI motherboard. PCI is the name of a | |
2059 | bus system, i.e. the way the CPU talks to the other stuff inside | |
2060 | your box. Other bus systems are ISA, EISA, or VESA. If you have PCI, | |
2061 | say Y, otherwise N. | |
2062 | ||
1da177e4 LT |
2063 | config PCI_DOMAINS |
2064 | bool | |
1da177e4 LT |
2065 | |
2066 | source "drivers/pci/Kconfig" | |
2067 | ||
2068 | # | |
2069 | # ISA support is now enabled via select. Too many systems still have the one | |
2070 | # or other ISA chip on the board that users don't know about so don't expect | |
2071 | # users to choose the right thing ... | |
2072 | # | |
2073 | config ISA | |
2074 | bool | |
2075 | ||
2076 | config EISA | |
2077 | bool "EISA support" | |
5e83d430 | 2078 | depends on HW_HAS_EISA |
1da177e4 | 2079 | select ISA |
aa414dff | 2080 | select GENERIC_ISA_DMA |
1da177e4 LT |
2081 | ---help--- |
2082 | The Extended Industry Standard Architecture (EISA) bus was | |
2083 | developed as an open alternative to the IBM MicroChannel bus. | |
2084 | ||
2085 | The EISA bus provided some of the features of the IBM MicroChannel | |
2086 | bus while maintaining backward compatibility with cards made for | |
2087 | the older ISA bus. The EISA bus saw limited use between 1988 and | |
2088 | 1995 when it was made obsolete by the PCI bus. | |
2089 | ||
2090 | Say Y here if you are building a kernel for an EISA-based machine. | |
2091 | ||
2092 | Otherwise, say N. | |
2093 | ||
2094 | source "drivers/eisa/Kconfig" | |
2095 | ||
2096 | config TC | |
2097 | bool "TURBOchannel support" | |
2098 | depends on MACH_DECSTATION | |
2099 | help | |
2100 | TurboChannel is a DEC (now Compaq (now HP)) bus for Alpha and MIPS | |
2101 | processors. Documentation on writing device drivers for TurboChannel | |
2102 | is available at: | |
2103 | <http://www.cs.arizona.edu/computer.help/policy/DIGITAL_unix/AA-PS3HD-TET1_html/TITLE.html>. | |
2104 | ||
2105 | #config ACCESSBUS | |
2106 | # bool "Access.Bus support" | |
2107 | # depends on TC | |
2108 | ||
2109 | config MMU | |
2110 | bool | |
2111 | default y | |
2112 | ||
d865bea4 RB |
2113 | config I8253 |
2114 | bool | |
2115 | ||
cce335ae RB |
2116 | config ZONE_DMA32 |
2117 | bool | |
2118 | ||
1da177e4 LT |
2119 | source "drivers/pcmcia/Kconfig" |
2120 | ||
2121 | source "drivers/pci/hotplug/Kconfig" | |
2122 | ||
2123 | endmenu | |
2124 | ||
2125 | menu "Executable file formats" | |
2126 | ||
2127 | source "fs/Kconfig.binfmt" | |
2128 | ||
2129 | config TRAD_SIGNALS | |
2130 | bool | |
1da177e4 | 2131 | |
1da177e4 LT |
2132 | config MIPS32_COMPAT |
2133 | bool "Kernel support for Linux/MIPS 32-bit binary compatibility" | |
875d43e7 | 2134 | depends on 64BIT |
1da177e4 LT |
2135 | help |
2136 | Select this option if you want Linux/MIPS 32-bit binary | |
2137 | compatibility. Since all software available for Linux/MIPS is | |
2138 | currently 32-bit you should say Y here. | |
2139 | ||
2140 | config COMPAT | |
2141 | bool | |
2142 | depends on MIPS32_COMPAT | |
2143 | default y | |
2144 | ||
05e43966 AN |
2145 | config SYSVIPC_COMPAT |
2146 | bool | |
2147 | depends on COMPAT && SYSVIPC | |
2148 | default y | |
2149 | ||
1da177e4 LT |
2150 | config MIPS32_O32 |
2151 | bool "Kernel support for o32 binaries" | |
2152 | depends on MIPS32_COMPAT | |
2153 | help | |
2154 | Select this option if you want to run o32 binaries. These are pure | |
2155 | 32-bit binaries as used by the 32-bit Linux/MIPS port. Most of | |
2156 | existing binaries are in this format. | |
2157 | ||
2158 | If unsure, say Y. | |
2159 | ||
2160 | config MIPS32_N32 | |
2161 | bool "Kernel support for n32 binaries" | |
2162 | depends on MIPS32_COMPAT | |
2163 | help | |
2164 | Select this option if you want to run n32 binaries. These are | |
2165 | 64-bit binaries using 32-bit quantities for addressing and certain | |
2166 | data that would normally be 64-bit. They are used in special | |
2167 | cases. | |
2168 | ||
2169 | If unsure, say N. | |
2170 | ||
2171 | config BINFMT_ELF32 | |
2172 | bool | |
2173 | default y if MIPS32_O32 || MIPS32_N32 | |
2174 | ||
2116245e RB |
2175 | endmenu |
2176 | ||
2177 | menu "Power management options" | |
2178 | ||
363c55ca WZ |
2179 | config ARCH_HIBERNATION_POSSIBLE |
2180 | def_bool y | |
3f5b3e17 | 2181 | depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP |
363c55ca | 2182 | |
f4cb5700 JB |
2183 | config ARCH_SUSPEND_POSSIBLE |
2184 | def_bool y | |
3f5b3e17 | 2185 | depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP |
f4cb5700 | 2186 | |
2116245e | 2187 | source "kernel/power/Kconfig" |
952fa954 | 2188 | |
1da177e4 LT |
2189 | endmenu |
2190 | ||
d5950b43 SR |
2191 | source "net/Kconfig" |
2192 | ||
1da177e4 LT |
2193 | source "drivers/Kconfig" |
2194 | ||
2195 | source "fs/Kconfig" | |
2196 | ||
2197 | source "arch/mips/Kconfig.debug" | |
2198 | ||
2199 | source "security/Kconfig" | |
2200 | ||
2201 | source "crypto/Kconfig" | |
2202 | ||
2203 | source "lib/Kconfig" |