Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | config MIPS |
2 | bool | |
3 | default y | |
4 | # Horrible source of confusion. Die, die, die ... | |
5 | select EMBEDDED | |
6 | ||
875d43e7 RB |
7 | mainmenu "Linux/MIPS Kernel Configuration" |
8 | ||
1da177e4 LT |
9 | menu "Machine selection" |
10 | ||
5e83d430 RB |
11 | choice |
12 | prompt "System type" | |
13 | default SGI_IP22 | |
1da177e4 | 14 | |
5e83d430 RB |
15 | config MIPS_MTX1 |
16 | bool "Support for 4G Systems MTX-1 board" | |
1da177e4 | 17 | select DMA_NONCOHERENT |
5e83d430 RB |
18 | select HW_HAS_PCI |
19 | select SOC_AU1500 | |
7cf8053b | 20 | select SYS_HAS_CPU_MIPS32_R1 |
5e83d430 | 21 | select SYS_SUPPORTS_LITTLE_ENDIAN |
1da177e4 | 22 | |
5e83d430 RB |
23 | config MIPS_BOSPORUS |
24 | bool "AMD Alchemy Bosporus board" | |
25 | select SOC_AU1500 | |
1da177e4 | 26 | select DMA_NONCOHERENT |
7cf8053b | 27 | select SYS_HAS_CPU_MIPS32_R1 |
5e83d430 | 28 | select SYS_SUPPORTS_LITTLE_ENDIAN |
1da177e4 | 29 | |
5e83d430 RB |
30 | config MIPS_PB1000 |
31 | bool "AMD Alchemy PB1000 board" | |
32 | select SOC_AU1000 | |
1da177e4 | 33 | select DMA_NONCOHERENT |
5e83d430 RB |
34 | select HW_HAS_PCI |
35 | select SWAP_IO_SPACE | |
7cf8053b | 36 | select SYS_HAS_CPU_MIPS32_R1 |
5e83d430 | 37 | select SYS_SUPPORTS_LITTLE_ENDIAN |
1da177e4 | 38 | |
5e83d430 RB |
39 | config MIPS_PB1100 |
40 | bool "AMD Alchemy PB1100 board" | |
41 | select SOC_AU1100 | |
1da177e4 | 42 | select DMA_NONCOHERENT |
1da177e4 | 43 | select HW_HAS_PCI |
5e83d430 | 44 | select SWAP_IO_SPACE |
7cf8053b | 45 | select SYS_HAS_CPU_MIPS32_R1 |
5e83d430 | 46 | select SYS_SUPPORTS_LITTLE_ENDIAN |
1da177e4 | 47 | |
5e83d430 RB |
48 | config MIPS_PB1500 |
49 | bool "AMD Alchemy PB1500 board" | |
50 | select SOC_AU1500 | |
51 | select DMA_NONCOHERENT | |
52 | select HW_HAS_PCI | |
7cf8053b | 53 | select SYS_HAS_CPU_MIPS32_R1 |
5e83d430 | 54 | select SYS_SUPPORTS_LITTLE_ENDIAN |
1da177e4 | 55 | |
5e83d430 RB |
56 | config MIPS_PB1550 |
57 | bool "AMD Alchemy PB1550 board" | |
58 | select SOC_AU1550 | |
1da177e4 | 59 | select DMA_NONCOHERENT |
5e83d430 RB |
60 | select HW_HAS_PCI |
61 | select MIPS_DISABLE_OBSOLETE_IDE | |
7cf8053b | 62 | select SYS_HAS_CPU_MIPS32_R1 |
5e83d430 | 63 | select SYS_SUPPORTS_LITTLE_ENDIAN |
1da177e4 | 64 | |
5e83d430 RB |
65 | config MIPS_PB1200 |
66 | bool "AMD Alchemy PB1200 board" | |
67 | select SOC_AU1200 | |
1da177e4 | 68 | select DMA_NONCOHERENT |
5e83d430 | 69 | select MIPS_DISABLE_OBSOLETE_IDE |
7cf8053b | 70 | select SYS_HAS_CPU_MIPS32_R1 |
5e83d430 | 71 | select SYS_SUPPORTS_LITTLE_ENDIAN |
1da177e4 | 72 | |
5e83d430 RB |
73 | config MIPS_DB1000 |
74 | bool "AMD Alchemy DB1000 board" | |
75 | select SOC_AU1000 | |
1da177e4 | 76 | select DMA_NONCOHERENT |
63b799f9 | 77 | select HW_HAS_PCI |
7cf8053b | 78 | select SYS_HAS_CPU_MIPS32_R1 |
5e83d430 | 79 | select SYS_SUPPORTS_LITTLE_ENDIAN |
4d666d7a | 80 | |
5e83d430 RB |
81 | config MIPS_DB1100 |
82 | bool "AMD Alchemy DB1100 board" | |
83 | select SOC_AU1100 | |
1da177e4 | 84 | select DMA_NONCOHERENT |
7cf8053b | 85 | select SYS_HAS_CPU_MIPS32_R1 |
5e83d430 | 86 | select SYS_SUPPORTS_LITTLE_ENDIAN |
1da177e4 | 87 | |
5e83d430 RB |
88 | config MIPS_DB1500 |
89 | bool "AMD Alchemy DB1500 board" | |
90 | select SOC_AU1500 | |
1da177e4 | 91 | select DMA_NONCOHERENT |
8dd4aebe | 92 | select HW_HAS_PCI |
5e83d430 | 93 | select MIPS_DISABLE_OBSOLETE_IDE |
7cf8053b | 94 | select SYS_HAS_CPU_MIPS32_R1 |
5e83d430 RB |
95 | select SYS_SUPPORTS_BIG_ENDIAN |
96 | select SYS_SUPPORTS_LITTLE_ENDIAN | |
1da177e4 | 97 | |
5e83d430 RB |
98 | config MIPS_DB1550 |
99 | bool "AMD Alchemy DB1550 board" | |
100 | select SOC_AU1550 | |
101 | select HW_HAS_PCI | |
102 | select DMA_NONCOHERENT | |
103 | select MIPS_DISABLE_OBSOLETE_IDE | |
7cf8053b | 104 | select SYS_HAS_CPU_MIPS32_R1 |
5e83d430 | 105 | select SYS_SUPPORTS_LITTLE_ENDIAN |
1da177e4 | 106 | |
5e83d430 RB |
107 | config MIPS_DB1200 |
108 | bool "AMD Alchemy DB1200 board" | |
109 | select SOC_AU1200 | |
110 | select DMA_COHERENT | |
111 | select MIPS_DISABLE_OBSOLETE_IDE | |
7cf8053b | 112 | select SYS_HAS_CPU_MIPS32_R1 |
5e83d430 | 113 | select SYS_SUPPORTS_LITTLE_ENDIAN |
1da177e4 | 114 | |
5e83d430 RB |
115 | config MIPS_MIRAGE |
116 | bool "AMD Alchemy Mirage board" | |
1da177e4 | 117 | select DMA_NONCOHERENT |
5e83d430 | 118 | select SOC_AU1500 |
7cf8053b | 119 | select SYS_HAS_CPU_MIPS32_R1 |
5e83d430 | 120 | select SYS_SUPPORTS_LITTLE_ENDIAN |
1da177e4 LT |
121 | |
122 | config MIPS_COBALT | |
ed5ba2fb | 123 | bool "Support for Cobalt Server" |
1da177e4 LT |
124 | select DMA_NONCOHERENT |
125 | select HW_HAS_PCI | |
126 | select I8259 | |
127 | select IRQ_CPU | |
5e83d430 | 128 | select MIPS_GT64111 |
7cf8053b | 129 | select SYS_HAS_CPU_NEVADA |
ed5ba2fb YY |
130 | select SYS_SUPPORTS_32BIT_KERNEL |
131 | select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL | |
5e83d430 | 132 | select SYS_SUPPORTS_LITTLE_ENDIAN |
1da177e4 LT |
133 | |
134 | config MACH_DECSTATION | |
135 | bool "Support for DECstations" | |
136 | select BOOT_ELF32 | |
137 | select DMA_NONCOHERENT | |
b6d468ec | 138 | select EARLY_PRINTK |
1da177e4 | 139 | select IRQ_CPU |
7cf8053b RB |
140 | select SYS_HAS_CPU_R3000 |
141 | select SYS_HAS_CPU_R4X00 | |
ed5ba2fb YY |
142 | select SYS_SUPPORTS_32BIT_KERNEL |
143 | select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL | |
5e83d430 RB |
144 | select SYS_SUPPORTS_LITTLE_ENDIAN |
145 | help | |
1da177e4 LT |
146 | This enables support for DEC's MIPS based workstations. For details |
147 | see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the | |
148 | DECstation porting pages on <http://decstation.unix-ag.org/>. | |
149 | ||
150 | If you have one of the following DECstation Models you definitely | |
151 | want to choose R4xx0 for the CPU Type: | |
152 | ||
153 | DECstation 5000/50 | |
154 | DECstation 5000/150 | |
155 | DECstation 5000/260 | |
156 | DECsystem 5900/260 | |
157 | ||
158 | otherwise choose R3000. | |
159 | ||
160 | config MIPS_EV64120 | |
161 | bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)" | |
162 | depends on EXPERIMENTAL | |
163 | select DMA_NONCOHERENT | |
164 | select HW_HAS_PCI | |
165 | select MIPS_GT64120 | |
7cf8053b | 166 | select SYS_HAS_CPU_R5000 |
ed5ba2fb YY |
167 | select SYS_SUPPORTS_32BIT_KERNEL |
168 | select SYS_SUPPORTS_64BIT_KERNEL | |
5e83d430 | 169 | select SYS_SUPPORTS_BIG_ENDIAN |
1da177e4 LT |
170 | help |
171 | This is an evaluation board based on the Galileo GT-64120 | |
172 | single-chip system controller that contains a MIPS R5000 compatible | |
173 | core running at 75/100MHz. Their website is located at | |
174 | <http://www.marvell.com/>. Say Y here if you wish to build a | |
175 | kernel for this platform. | |
176 | ||
1da177e4 LT |
177 | config MIPS_EV96100 |
178 | bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)" | |
179 | depends on EXPERIMENTAL | |
180 | select DMA_NONCOHERENT | |
181 | select HW_HAS_PCI | |
182 | select IRQ_CPU | |
183 | select MIPS_GT96100 | |
184 | select RM7000_CPU_SCACHE | |
185 | select SWAP_IO_SPACE | |
7cf8053b RB |
186 | select SYS_HAS_CPU_R5000 |
187 | select SYS_HAS_CPU_RM7000 | |
ed5ba2fb | 188 | select SYS_SUPPORTS_32BIT_KERNEL |
5e83d430 RB |
189 | select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL |
190 | select SYS_SUPPORTS_BIG_ENDIAN | |
1da177e4 LT |
191 | help |
192 | This is an evaluation board based on the Galileo GT-96100 LAN/WAN | |
193 | communications controllers containing a MIPS R5000 compatible core | |
194 | running at 83MHz. Their website is <http://www.marvell.com/>. Say Y | |
195 | here if you wish to build a kernel for this platform. | |
196 | ||
197 | config MIPS_IVR | |
198 | bool "Support for Globespan IVR board" | |
199 | select DMA_NONCOHERENT | |
200 | select HW_HAS_PCI | |
5e83d430 | 201 | select ITE_BOARD_GEN |
7cf8053b | 202 | select SYS_HAS_CPU_NEVADA |
ed5ba2fb YY |
203 | select SYS_SUPPORTS_32BIT_KERNEL |
204 | select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL | |
5e83d430 | 205 | select SYS_SUPPORTS_LITTLE_ENDIAN |
1da177e4 LT |
206 | help |
207 | This is an evaluation board built by Globespan to showcase thir | |
208 | iVR (Internet Video Recorder) design. It utilizes a QED RM5231 | |
209 | R5000 MIPS core. More information can be found out their website | |
210 | located at <http://www.globespan.net/>. Say Y here if you wish to | |
211 | build a kernel for this platform. | |
212 | ||
1da177e4 LT |
213 | config MIPS_ITE8172 |
214 | bool "Support for ITE 8172G board" | |
215 | select DMA_NONCOHERENT | |
216 | select HW_HAS_PCI | |
5e83d430 | 217 | select ITE_BOARD_GEN |
7cf8053b RB |
218 | select SYS_HAS_CPU_R5432 |
219 | select SYS_HAS_CPU_NEVADA | |
ed5ba2fb YY |
220 | select SYS_SUPPORTS_32BIT_KERNEL |
221 | select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL | |
5e83d430 | 222 | select SYS_SUPPORTS_LITTLE_ENDIAN |
1da177e4 LT |
223 | help |
224 | Ths is an evaluation board made by ITE <http://www.ite.com.tw/> | |
225 | with ATX form factor that utilizes a MIPS R5000 to work with its | |
226 | ITE8172G companion internet appliance chip. The MIPS core can be | |
227 | either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build | |
228 | a kernel for this platform. | |
229 | ||
5e83d430 RB |
230 | config MACH_JAZZ |
231 | bool "Support for the Jazz family of machines" | |
232 | select ARC | |
233 | select ARC32 | |
234 | select ARCH_MAY_HAVE_PC_FDC | |
235 | select GENERIC_ISA_DMA | |
236 | select I8259 | |
237 | select ISA | |
7cf8053b | 238 | select SYS_HAS_CPU_R4X00 |
5e83d430 RB |
239 | select SYS_SUPPORTS_32BIT_KERNEL |
240 | select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL | |
1da177e4 | 241 | help |
5e83d430 RB |
242 | This a family of machines based on the MIPS R4030 chipset which was |
243 | used by several vendors to build RISC/os and Windows NT workstations. | |
244 | Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and | |
245 | Olivetti M700-10 workstations. | |
246 | ||
247 | config LASAT | |
248 | bool "Support for LASAT Networks platforms" | |
249 | select DMA_NONCOHERENT | |
250 | select HW_HAS_PCI | |
251 | select MIPS_GT64120 | |
252 | select MIPS_NILE4 | |
253 | select R5000_CPU_SCACHE | |
7cf8053b | 254 | select SYS_HAS_CPU_R5000 |
5e83d430 RB |
255 | select SYS_SUPPORTS_32BIT_KERNEL |
256 | select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL | |
257 | select SYS_SUPPORTS_LITTLE_ENDIAN | |
1da177e4 LT |
258 | |
259 | config MIPS_ATLAS | |
260 | bool "Support for MIPS Atlas board" | |
261 | select BOOT_ELF32 | |
262 | select DMA_NONCOHERENT | |
5e83d430 | 263 | select IRQ_CPU |
1da177e4 | 264 | select HW_HAS_PCI |
5e83d430 RB |
265 | select MIPS_BOARDS_GEN |
266 | select MIPS_BONITO64 | |
1da177e4 | 267 | select MIPS_GT64120 |
5e83d430 | 268 | select MIPS_MSC |
f4b7cdb4 | 269 | select RM7000_CPU_SCACHE |
1da177e4 | 270 | select SWAP_IO_SPACE |
7cf8053b RB |
271 | select SYS_HAS_CPU_MIPS32_R1 |
272 | select SYS_HAS_CPU_MIPS32_R2 | |
273 | select SYS_HAS_CPU_MIPS64_R1 | |
274 | select SYS_HAS_CPU_NEVADA | |
275 | select SYS_HAS_CPU_RM7000 | |
ed5ba2fb YY |
276 | select SYS_SUPPORTS_32BIT_KERNEL |
277 | select SYS_SUPPORTS_64BIT_KERNEL | |
5e83d430 RB |
278 | select SYS_SUPPORTS_BIG_ENDIAN |
279 | select SYS_SUPPORTS_LITTLE_ENDIAN | |
1da177e4 | 280 | help |
f638d197 | 281 | This enables support for the MIPS Technologies Atlas evaluation |
1da177e4 LT |
282 | board. |
283 | ||
284 | config MIPS_MALTA | |
285 | bool "Support for MIPS Malta board" | |
61ed242d | 286 | select ARCH_MAY_HAVE_PC_FDC |
1da177e4 LT |
287 | select BOOT_ELF32 |
288 | select HAVE_STD_PC_SERIAL_PORT | |
289 | select DMA_NONCOHERENT | |
e01402b1 | 290 | select IRQ_CPU |
1da177e4 LT |
291 | select GENERIC_ISA_DMA |
292 | select HW_HAS_PCI | |
293 | select I8259 | |
5e83d430 RB |
294 | select MIPS_BOARDS_GEN |
295 | select MIPS_BONITO64 | |
1da177e4 | 296 | select MIPS_GT64120 |
5e83d430 | 297 | select MIPS_MSC |
1da177e4 | 298 | select SWAP_IO_SPACE |
7cf8053b RB |
299 | select SYS_HAS_CPU_MIPS32_R1 |
300 | select SYS_HAS_CPU_MIPS32_R2 | |
301 | select SYS_HAS_CPU_MIPS64_R1 | |
302 | select SYS_HAS_CPU_NEVADA | |
303 | select SYS_HAS_CPU_RM7000 | |
ed5ba2fb YY |
304 | select SYS_SUPPORTS_32BIT_KERNEL |
305 | select SYS_SUPPORTS_64BIT_KERNEL | |
5e83d430 RB |
306 | select SYS_SUPPORTS_BIG_ENDIAN |
307 | select SYS_SUPPORTS_LITTLE_ENDIAN | |
1da177e4 | 308 | help |
f638d197 | 309 | This enables support for the MIPS Technologies Malta evaluation |
1da177e4 LT |
310 | board. |
311 | ||
312 | config MIPS_SEAD | |
313 | bool "Support for MIPS SEAD board (EXPERIMENTAL)" | |
314 | depends on EXPERIMENTAL | |
315 | select IRQ_CPU | |
316 | select DMA_NONCOHERENT | |
5e83d430 | 317 | select MIPS_BOARDS_GEN |
7cf8053b RB |
318 | select SYS_HAS_CPU_MIPS32_R1 |
319 | select SYS_HAS_CPU_MIPS32_R2 | |
320 | select SYS_HAS_CPU_MIPS64_R1 | |
ed5ba2fb | 321 | select SYS_SUPPORTS_32BIT_KERNEL |
5e83d430 RB |
322 | select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL |
323 | select SYS_SUPPORTS_BIG_ENDIAN | |
324 | select SYS_SUPPORTS_LITTLE_ENDIAN | |
f638d197 MR |
325 | help |
326 | This enables support for the MIPS Technologies SEAD evaluation | |
327 | board. | |
1da177e4 | 328 | |
5e83d430 RB |
329 | config MIPS_SIM |
330 | bool 'Support for MIPS simulator (MIPSsim)' | |
1da177e4 | 331 | select DMA_NONCOHERENT |
1da177e4 | 332 | select IRQ_CPU |
7cf8053b RB |
333 | select SYS_HAS_CPU_MIPS32_R1 |
334 | select SYS_HAS_CPU_MIPS32_R2 | |
ed5ba2fb | 335 | select SYS_SUPPORTS_32BIT_KERNEL |
5e83d430 RB |
336 | select SYS_SUPPORTS_BIG_ENDIAN |
337 | select SYS_SUPPORTS_LITTLE_ENDIAN | |
1da177e4 | 338 | help |
5e83d430 RB |
339 | This option enables support for MIPS Technologies MIPSsim software |
340 | emulator. | |
1da177e4 | 341 | |
5e83d430 RB |
342 | config MOMENCO_JAGUAR_ATX |
343 | bool "Support for Momentum Jaguar board" | |
344 | select BOOT_ELF32 | |
1da177e4 LT |
345 | select DMA_NONCOHERENT |
346 | select HW_HAS_PCI | |
347 | select IRQ_CPU | |
348 | select IRQ_CPU_RM7K | |
5e83d430 RB |
349 | select IRQ_MV64340 |
350 | select LIMITED_DMA | |
1da177e4 LT |
351 | select PCI_MARVELL |
352 | select RM7000_CPU_SCACHE | |
353 | select SWAP_IO_SPACE | |
7cf8053b | 354 | select SYS_HAS_CPU_RM9000 |
ed5ba2fb YY |
355 | select SYS_SUPPORTS_32BIT_KERNEL |
356 | select SYS_SUPPORTS_64BIT_KERNEL | |
5e83d430 | 357 | select SYS_SUPPORTS_BIG_ENDIAN |
1da177e4 | 358 | help |
5e83d430 | 359 | The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by |
1da177e4 LT |
360 | Momentum Computer <http://www.momenco.com/>. |
361 | ||
5e83d430 RB |
362 | config MOMENCO_OCELOT |
363 | bool "Support for Momentum Ocelot board" | |
1da177e4 LT |
364 | select DMA_NONCOHERENT |
365 | select HW_HAS_PCI | |
366 | select IRQ_CPU | |
5e83d430 RB |
367 | select IRQ_CPU_RM7K |
368 | select MIPS_GT64120 | |
1da177e4 LT |
369 | select RM7000_CPU_SCACHE |
370 | select SWAP_IO_SPACE | |
7cf8053b | 371 | select SYS_HAS_CPU_RM7000 |
ed5ba2fb YY |
372 | select SYS_SUPPORTS_32BIT_KERNEL |
373 | select SYS_SUPPORTS_64BIT_KERNEL | |
5e83d430 | 374 | select SYS_SUPPORTS_BIG_ENDIAN |
1da177e4 LT |
375 | help |
376 | The Ocelot is a MIPS-based Single Board Computer (SBC) made by | |
377 | Momentum Computer <http://www.momenco.com/>. | |
378 | ||
379 | config MOMENCO_OCELOT_3 | |
380 | bool "Support for Momentum Ocelot-3 board" | |
381 | select BOOT_ELF32 | |
382 | select DMA_NONCOHERENT | |
383 | select HW_HAS_PCI | |
384 | select IRQ_CPU | |
385 | select IRQ_CPU_RM7K | |
386 | select IRQ_MV64340 | |
387 | select PCI_MARVELL | |
388 | select RM7000_CPU_SCACHE | |
389 | select SWAP_IO_SPACE | |
7cf8053b | 390 | select SYS_HAS_CPU_RM9000 |
ed5ba2fb YY |
391 | select SYS_SUPPORTS_32BIT_KERNEL |
392 | select SYS_SUPPORTS_64BIT_KERNEL | |
5e83d430 | 393 | select SYS_SUPPORTS_BIG_ENDIAN |
1da177e4 LT |
394 | help |
395 | The Ocelot-3 is based off Discovery III System Controller and | |
396 | PMC-Sierra Rm79000 core. | |
397 | ||
5e83d430 RB |
398 | config MOMENCO_OCELOT_C |
399 | bool "Support for Momentum Ocelot-C board" | |
1da177e4 LT |
400 | select DMA_NONCOHERENT |
401 | select HW_HAS_PCI | |
402 | select IRQ_CPU | |
1da177e4 | 403 | select IRQ_MV64340 |
1da177e4 LT |
404 | select PCI_MARVELL |
405 | select RM7000_CPU_SCACHE | |
406 | select SWAP_IO_SPACE | |
7cf8053b | 407 | select SYS_HAS_CPU_RM7000 |
ed5ba2fb YY |
408 | select SYS_SUPPORTS_32BIT_KERNEL |
409 | select SYS_SUPPORTS_64BIT_KERNEL | |
5e83d430 | 410 | select SYS_SUPPORTS_BIG_ENDIAN |
1da177e4 | 411 | help |
5e83d430 | 412 | The Ocelot is a MIPS-based Single Board Computer (SBC) made by |
1da177e4 LT |
413 | Momentum Computer <http://www.momenco.com/>. |
414 | ||
5e83d430 RB |
415 | config MOMENCO_OCELOT_G |
416 | bool "Support for Momentum Ocelot-G board" | |
417 | select DMA_NONCOHERENT | |
1da177e4 LT |
418 | select HW_HAS_PCI |
419 | select IRQ_CPU | |
420 | select IRQ_CPU_RM7K | |
5e83d430 RB |
421 | select PCI_MARVELL |
422 | select RM7000_CPU_SCACHE | |
1da177e4 | 423 | select SWAP_IO_SPACE |
7cf8053b | 424 | select SYS_HAS_CPU_RM7000 |
ed5ba2fb YY |
425 | select SYS_SUPPORTS_32BIT_KERNEL |
426 | select SYS_SUPPORTS_64BIT_KERNEL | |
5e83d430 | 427 | select SYS_SUPPORTS_BIG_ENDIAN |
1da177e4 | 428 | help |
5e83d430 RB |
429 | The Ocelot is a MIPS-based Single Board Computer (SBC) made by |
430 | Momentum Computer <http://www.momenco.com/>. | |
1da177e4 | 431 | |
5e83d430 RB |
432 | config MIPS_XXS1500 |
433 | bool "Support for MyCable XXS1500 board" | |
434 | select DMA_NONCOHERENT | |
435 | select SOC_AU1500 | |
436 | select SYS_SUPPORTS_LITTLE_ENDIAN | |
1da177e4 | 437 | |
bdf21b18 PP |
438 | config PNX8550_V2PCI |
439 | bool "Support for Philips PNX8550 based Viper2-PCI board" | |
440 | select PNX8550 | |
441 | select SYS_SUPPORTS_LITTLE_ENDIAN | |
442 | ||
443 | config PNX8550_JBS | |
444 | bool "Support for Philips PNX8550 based JBS board" | |
445 | select PNX8550 | |
446 | select SYS_SUPPORTS_LITTLE_ENDIAN | |
447 | ||
1da177e4 LT |
448 | config DDB5074 |
449 | bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)" | |
450 | depends on EXPERIMENTAL | |
5e83d430 | 451 | select DDB5XXX_COMMON |
1da177e4 LT |
452 | select DMA_NONCOHERENT |
453 | select HAVE_STD_PC_SERIAL_PORT | |
454 | select HW_HAS_PCI | |
455 | select IRQ_CPU | |
456 | select I8259 | |
457 | select ISA | |
7cf8053b | 458 | select SYS_HAS_CPU_R5000 |
ed5ba2fb | 459 | select SYS_SUPPORTS_32BIT_KERNEL |
5e83d430 RB |
460 | select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL |
461 | select SYS_SUPPORTS_LITTLE_ENDIAN | |
1da177e4 LT |
462 | help |
463 | This enables support for the VR5000-based NEC DDB Vrc-5074 | |
464 | evaluation board. | |
465 | ||
466 | config DDB5476 | |
467 | bool "Support for NEC DDB Vrc-5476" | |
5e83d430 | 468 | select DDB5XXX_COMMON |
1da177e4 LT |
469 | select DMA_NONCOHERENT |
470 | select HAVE_STD_PC_SERIAL_PORT | |
471 | select HW_HAS_PCI | |
472 | select IRQ_CPU | |
473 | select I8259 | |
474 | select ISA | |
7cf8053b | 475 | select SYS_HAS_CPU_R5432 |
ed5ba2fb YY |
476 | select SYS_SUPPORTS_32BIT_KERNEL |
477 | select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL | |
5e83d430 | 478 | select SYS_SUPPORTS_LITTLE_ENDIAN |
1da177e4 LT |
479 | help |
480 | This enables support for the R5432-based NEC DDB Vrc-5476 | |
481 | evaluation board. | |
482 | ||
483 | Features : kernel debugging, serial terminal, NFS root fs, on-board | |
484 | ether port USB, AC97, PCI, PCI VGA card & framebuffer console, | |
485 | IDE controller, PS2 keyboard, PS2 mouse, etc. | |
486 | ||
487 | config DDB5477 | |
488 | bool "Support for NEC DDB Vrc-5477" | |
5e83d430 | 489 | select DDB5XXX_COMMON |
1da177e4 LT |
490 | select DMA_NONCOHERENT |
491 | select HW_HAS_PCI | |
492 | select I8259 | |
493 | select IRQ_CPU | |
7cf8053b | 494 | select SYS_HAS_CPU_R5432 |
ed5ba2fb YY |
495 | select SYS_SUPPORTS_32BIT_KERNEL |
496 | select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL | |
5e83d430 | 497 | select SYS_SUPPORTS_LITTLE_ENDIAN |
1da177e4 LT |
498 | help |
499 | This enables support for the R5432-based NEC DDB Vrc-5477, | |
500 | or Rockhopper/SolutionGear boards with R5432/R5500 CPUs. | |
501 | ||
502 | Features : kernel debugging, serial terminal, NFS root fs, on-board | |
503 | ether port USB, AC97, PCI, etc. | |
504 | ||
5e83d430 RB |
505 | config MACH_VR41XX |
506 | bool "Support for NEC VR4100 series based machines" | |
7cf8053b | 507 | select SYS_HAS_CPU_VR41XX |
5e83d430 RB |
508 | select SYS_SUPPORTS_32BIT_KERNEL |
509 | select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL | |
510 | ||
511 | config PMC_YOSEMITE | |
512 | bool "Support for PMC-Sierra Yosemite eval board" | |
513 | select DMA_COHERENT | |
514 | select HW_HAS_PCI | |
515 | select IRQ_CPU | |
516 | select IRQ_CPU_RM7K | |
517 | select IRQ_CPU_RM9K | |
518 | select SWAP_IO_SPACE | |
7cf8053b | 519 | select SYS_HAS_CPU_RM9000 |
5e83d430 RB |
520 | select SYS_SUPPORTS_32BIT_KERNEL |
521 | select SYS_SUPPORTS_64BIT_KERNEL | |
522 | select SYS_SUPPORTS_BIG_ENDIAN | |
523 | select SYS_SUPPORTS_HIGHMEM | |
524 | help | |
525 | Yosemite is an evaluation board for the RM9000x2 processor | |
526 | manufactured by PMC-Sierra. | |
1da177e4 | 527 | |
07119621 RB |
528 | config QEMU |
529 | bool "Support for Qemu" | |
530 | select DMA_COHERENT | |
531 | select GENERIC_ISA_DMA | |
532 | select HAVE_STD_PC_SERIAL_PORT | |
533 | select I8259 | |
534 | select ISA | |
535 | select SWAP_IO_SPACE | |
7cf8053b | 536 | select SYS_HAS_CPU_MIPS32_R1 |
07119621 RB |
537 | select SYS_SUPPORTS_32BIT_KERNEL |
538 | select SYS_SUPPORTS_BIG_ENDIAN | |
539 | help | |
5e83d430 RB |
540 | Qemu is a software emulator which among other architectures also |
541 | can simulate a MIPS32 4Kc system. This patch adds support for the | |
542 | system architecture that currently is being simulated by Qemu. It | |
543 | will eventually be removed again when Qemu has the capability to | |
544 | simulate actual MIPS hardware platforms. More information on Qemu | |
545 | can be found at http://www.linux-mips.org/wiki/Qemu. | |
07119621 | 546 | |
1da177e4 LT |
547 | config SGI_IP22 |
548 | bool "Support for SGI IP22 (Indy/Indigo2)" | |
549 | select ARC | |
550 | select ARC32 | |
551 | select BOOT_ELF32 | |
552 | select DMA_NONCOHERENT | |
5e83d430 | 553 | select HW_HAS_EISA |
1da177e4 LT |
554 | select IP22_CPU_SCACHE |
555 | select IRQ_CPU | |
556 | select SWAP_IO_SPACE | |
7cf8053b RB |
557 | select SYS_HAS_CPU_R4X00 |
558 | select SYS_HAS_CPU_R5000 | |
ed5ba2fb YY |
559 | select SYS_SUPPORTS_32BIT_KERNEL |
560 | select SYS_SUPPORTS_64BIT_KERNEL | |
5e83d430 | 561 | select SYS_SUPPORTS_BIG_ENDIAN |
1da177e4 LT |
562 | help |
563 | This are the SGI Indy, Challenge S and Indigo2, as well as certain | |
564 | OEM variants like the Tandem CMN B006S. To compile a Linux kernel | |
565 | that runs on these, say Y here. | |
566 | ||
567 | config SGI_IP27 | |
568 | bool "Support for SGI IP27 (Origin200/2000)" | |
1da177e4 LT |
569 | select ARC |
570 | select ARC64 | |
5e83d430 | 571 | select BOOT_ELF64 |
1da177e4 LT |
572 | select DMA_IP27 |
573 | select HW_HAS_PCI | |
574 | select PCI_DOMAINS | |
7cf8053b | 575 | select SYS_HAS_CPU_R10000 |
ed5ba2fb | 576 | select SYS_SUPPORTS_64BIT_KERNEL |
5e83d430 | 577 | select SYS_SUPPORTS_BIG_ENDIAN |
1da177e4 LT |
578 | help |
579 | This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics | |
580 | workstations. To compile a Linux kernel that runs on these, say Y | |
581 | here. | |
582 | ||
1da177e4 LT |
583 | config SGI_IP32 |
584 | bool "Support for SGI IP32 (O2) (EXPERIMENTAL)" | |
ed5ba2fb | 585 | depends on EXPERIMENTAL |
1da177e4 LT |
586 | select ARC |
587 | select ARC32 | |
588 | select BOOT_ELF32 | |
589 | select OWN_DMA | |
590 | select DMA_IP32 | |
591 | select DMA_NONCOHERENT | |
592 | select HW_HAS_PCI | |
593 | select R5000_CPU_SCACHE | |
594 | select RM7000_CPU_SCACHE | |
7cf8053b RB |
595 | select SYS_HAS_CPU_R5000 |
596 | select SYS_HAS_CPU_R10000 if BROKEN | |
597 | select SYS_HAS_CPU_RM7000 | |
dd2f18fe | 598 | select SYS_HAS_CPU_NEVADA |
ed5ba2fb | 599 | select SYS_SUPPORTS_64BIT_KERNEL |
23fbee9d | 600 | select SYS_SUPPORTS_BIG_ENDIAN |
23fbee9d | 601 | help |
5e83d430 | 602 | If you want this kernel to run on SGI O2 workstation, say Y here. |
1da177e4 | 603 | |
9a6dcea1 | 604 | config SIBYTE_BIGSUR |
a206f6a7 | 605 | bool "Support for Sibyte BCM91480B-BigSur" |
9a6dcea1 AI |
606 | select BOOT_ELF32 |
607 | select DMA_COHERENT | |
7cf8053b | 608 | select PCI_DOMAINS |
9a6dcea1 AI |
609 | select SIBYTE_BCM1x80 |
610 | select SWAP_IO_SPACE | |
7cf8053b | 611 | select SYS_HAS_CPU_SB1 |
9a6dcea1 AI |
612 | select SYS_SUPPORTS_BIG_ENDIAN |
613 | select SYS_SUPPORTS_LITTLE_ENDIAN | |
614 | ||
5e83d430 RB |
615 | config SIBYTE_SWARM |
616 | bool "Support for Sibyte BCM91250A-SWARM" | |
617 | select BOOT_ELF32 | |
1da177e4 | 618 | select DMA_COHERENT |
5e83d430 RB |
619 | select SIBYTE_SB1250 |
620 | select SWAP_IO_SPACE | |
7cf8053b | 621 | select SYS_HAS_CPU_SB1 |
81731f79 | 622 | select SYS_SUPPORTS_BIG_ENDIAN |
5e83d430 RB |
623 | select SYS_SUPPORTS_HIGHMEM |
624 | select SYS_SUPPORTS_LITTLE_ENDIAN | |
1da177e4 | 625 | |
5e83d430 RB |
626 | config SIBYTE_SENTOSA |
627 | bool "Support for Sibyte BCM91250E-Sentosa" | |
628 | depends on EXPERIMENTAL | |
629 | select BOOT_ELF32 | |
630 | select DMA_COHERENT | |
631 | select SIBYTE_SB1250 | |
632 | select SWAP_IO_SPACE | |
7cf8053b | 633 | select SYS_HAS_CPU_SB1 |
5e83d430 RB |
634 | select SYS_SUPPORTS_BIG_ENDIAN |
635 | select SYS_SUPPORTS_LITTLE_ENDIAN | |
1da177e4 | 636 | |
5e83d430 RB |
637 | config SIBYTE_RHONE |
638 | bool "Support for Sibyte BCM91125E-Rhone" | |
639 | depends on EXPERIMENTAL | |
640 | select BOOT_ELF32 | |
641 | select DMA_COHERENT | |
642 | select SIBYTE_BCM1125H | |
643 | select SWAP_IO_SPACE | |
7cf8053b | 644 | select SYS_HAS_CPU_SB1 |
5e83d430 RB |
645 | select SYS_SUPPORTS_BIG_ENDIAN |
646 | select SYS_SUPPORTS_LITTLE_ENDIAN | |
1da177e4 | 647 | |
5e83d430 RB |
648 | config SIBYTE_CARMEL |
649 | bool "Support for Sibyte BCM91120x-Carmel" | |
650 | depends on EXPERIMENTAL | |
651 | select BOOT_ELF32 | |
26a940e2 | 652 | select DMA_COHERENT |
5e83d430 RB |
653 | select SIBYTE_BCM1120 |
654 | select SWAP_IO_SPACE | |
7cf8053b | 655 | select SYS_HAS_CPU_SB1 |
5e83d430 | 656 | select SYS_SUPPORTS_BIG_ENDIAN |
e3ad1c23 PP |
657 | select SYS_SUPPORTS_LITTLE_ENDIAN |
658 | ||
5e83d430 RB |
659 | config SIBYTE_PTSWARM |
660 | bool "Support for Sibyte BCM91250PT-PTSWARM" | |
661 | depends on EXPERIMENTAL | |
662 | select BOOT_ELF32 | |
663 | select DMA_COHERENT | |
664 | select SIBYTE_SB1250 | |
665 | select SWAP_IO_SPACE | |
7cf8053b | 666 | select SYS_HAS_CPU_SB1 |
5e83d430 RB |
667 | select SYS_SUPPORTS_BIG_ENDIAN |
668 | select SYS_SUPPORTS_HIGHMEM | |
669 | select SYS_SUPPORTS_LITTLE_ENDIAN | |
1da177e4 | 670 | |
5e83d430 RB |
671 | config SIBYTE_LITTLESUR |
672 | bool "Support for Sibyte BCM91250C2-LittleSur" | |
673 | depends on EXPERIMENTAL | |
674 | select BOOT_ELF32 | |
675 | select DMA_COHERENT | |
676 | select SIBYTE_SB1250 | |
677 | select SWAP_IO_SPACE | |
7cf8053b | 678 | select SYS_HAS_CPU_SB1 |
5e83d430 RB |
679 | select SYS_SUPPORTS_BIG_ENDIAN |
680 | select SYS_SUPPORTS_HIGHMEM | |
681 | select SYS_SUPPORTS_LITTLE_ENDIAN | |
1da177e4 | 682 | |
5e83d430 RB |
683 | config SIBYTE_CRHINE |
684 | bool "Support for Sibyte BCM91120C-CRhine" | |
685 | depends on EXPERIMENTAL | |
686 | select BOOT_ELF32 | |
687 | select DMA_COHERENT | |
688 | select SIBYTE_BCM1120 | |
689 | select SWAP_IO_SPACE | |
7cf8053b | 690 | select SYS_HAS_CPU_SB1 |
5e83d430 RB |
691 | select SYS_SUPPORTS_BIG_ENDIAN |
692 | select SYS_SUPPORTS_LITTLE_ENDIAN | |
1da177e4 | 693 | |
5e83d430 RB |
694 | config SIBYTE_CRHONE |
695 | bool "Support for Sibyte BCM91125C-CRhone" | |
696 | depends on EXPERIMENTAL | |
697 | select BOOT_ELF32 | |
698 | select DMA_COHERENT | |
699 | select SIBYTE_BCM1125 | |
700 | select SWAP_IO_SPACE | |
7cf8053b | 701 | select SYS_HAS_CPU_SB1 |
5e83d430 RB |
702 | select SYS_SUPPORTS_BIG_ENDIAN |
703 | select SYS_SUPPORTS_HIGHMEM | |
704 | select SYS_SUPPORTS_LITTLE_ENDIAN | |
1da177e4 | 705 | |
1da177e4 LT |
706 | config SNI_RM200_PCI |
707 | bool "Support for SNI RM200 PCI" | |
708 | select ARC | |
709 | select ARC32 | |
61ed242d | 710 | select ARCH_MAY_HAVE_PC_FDC |
1da177e4 LT |
711 | select BOOT_ELF32 |
712 | select DMA_NONCOHERENT | |
713 | select GENERIC_ISA_DMA | |
714 | select HAVE_STD_PC_SERIAL_PORT | |
5e83d430 | 715 | select HW_HAS_EISA |
1da177e4 LT |
716 | select HW_HAS_PCI |
717 | select I8259 | |
718 | select ISA | |
7cf8053b | 719 | select SYS_HAS_CPU_R4X00 |
ed5ba2fb YY |
720 | select SYS_SUPPORTS_32BIT_KERNEL |
721 | select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL | |
5e83d430 | 722 | select SYS_SUPPORTS_BIG_ENDIAN if EXPERIMENTAL |
797798c1 | 723 | select SYS_SUPPORTS_HIGHMEM |
5e83d430 | 724 | select SYS_SUPPORTS_LITTLE_ENDIAN |
1da177e4 LT |
725 | help |
726 | The SNI RM200 PCI was a MIPS-based platform manufactured by Siemens | |
727 | Nixdorf Informationssysteme (SNI), parent company of Pyramid | |
728 | Technology and now in turn merged with Fujitsu. Say Y here to | |
729 | support this machine type. | |
730 | ||
5e83d430 RB |
731 | config TOSHIBA_JMR3927 |
732 | bool "Support for Toshiba JMR-TX3927 board" | |
733 | select DMA_NONCOHERENT | |
734 | select HW_HAS_PCI | |
735 | select MIPS_TX3927 | |
736 | select SWAP_IO_SPACE | |
7cf8053b | 737 | select SYS_HAS_CPU_TX39XX |
5e83d430 RB |
738 | select SYS_SUPPORTS_32BIT_KERNEL |
739 | select SYS_SUPPORTS_BIG_ENDIAN | |
740 | select TOSHIBA_BOARDS | |
741 | ||
1da177e4 LT |
742 | config TOSHIBA_RBTX4927 |
743 | bool "Support for Toshiba TBTX49[23]7 board" | |
1da177e4 LT |
744 | select DMA_NONCOHERENT |
745 | select HAS_TXX9_SERIAL | |
746 | select HW_HAS_PCI | |
747 | select I8259 | |
748 | select ISA | |
749 | select SWAP_IO_SPACE | |
7cf8053b | 750 | select SYS_HAS_CPU_TX49XX |
ed5ba2fb YY |
751 | select SYS_SUPPORTS_32BIT_KERNEL |
752 | select SYS_SUPPORTS_64BIT_KERNEL | |
5e83d430 RB |
753 | select SYS_SUPPORTS_BIG_ENDIAN |
754 | select TOSHIBA_BOARDS | |
1da177e4 LT |
755 | help |
756 | This Toshiba board is based on the TX4927 processor. Say Y here to | |
757 | support this machine type | |
758 | ||
5e83d430 RB |
759 | config TOSHIBA_RBTX4938 |
760 | bool "Support for Toshiba RBTX4938 board" | |
761 | select HAVE_STD_PC_SERIAL_PORT | |
762 | select DMA_NONCOHERENT | |
763 | select GENERIC_ISA_DMA | |
764 | select HAS_TXX9_SERIAL | |
765 | select HW_HAS_PCI | |
766 | select I8259 | |
767 | select ISA | |
768 | select SWAP_IO_SPACE | |
7cf8053b | 769 | select SYS_HAS_CPU_TX49XX |
5e83d430 RB |
770 | select SYS_SUPPORTS_32BIT_KERNEL |
771 | select SYS_SUPPORTS_LITTLE_ENDIAN | |
772 | select SYS_SUPPORTS_BIG_ENDIAN | |
773 | select TOSHIBA_BOARDS | |
774 | help | |
775 | This Toshiba board is based on the TX4938 processor. Say Y here to | |
776 | support this machine type | |
777 | ||
778 | endchoice | |
1da177e4 | 779 | |
5e83d430 RB |
780 | source "arch/mips/ddb5xxx/Kconfig" |
781 | source "arch/mips/gt64120/ev64120/Kconfig" | |
782 | source "arch/mips/jazz/Kconfig" | |
783 | source "arch/mips/ite-boards/Kconfig" | |
784 | source "arch/mips/lasat/Kconfig" | |
785 | source "arch/mips/momentum/Kconfig" | |
786 | source "arch/mips/pmc-sierra/Kconfig" | |
29c48699 | 787 | source "arch/mips/sgi-ip27/Kconfig" |
38b18f72 | 788 | source "arch/mips/sibyte/Kconfig" |
5e83d430 | 789 | source "arch/mips/tx4927/Kconfig" |
23fbee9d | 790 | source "arch/mips/tx4938/Kconfig" |
5e83d430 | 791 | source "arch/mips/vr41xx/Kconfig" |
bdf21b18 | 792 | source "arch/mips/philips/pnx8550/common/Kconfig" |
e87dddeb | 793 | source "arch/mips/cobalt/Kconfig" |
38b18f72 | 794 | |
5e83d430 RB |
795 | endmenu |
796 | ||
1da177e4 LT |
797 | config RWSEM_GENERIC_SPINLOCK |
798 | bool | |
799 | default y | |
800 | ||
801 | config RWSEM_XCHGADD_ALGORITHM | |
802 | bool | |
803 | ||
804 | config GENERIC_CALIBRATE_DELAY | |
805 | bool | |
806 | default y | |
807 | ||
1da177e4 LT |
808 | # |
809 | # Select some configuration options automatically based on user selections. | |
810 | # | |
811 | config ARC | |
812 | bool | |
1da177e4 | 813 | |
61ed242d RB |
814 | config ARCH_MAY_HAVE_PC_FDC |
815 | bool | |
816 | ||
4ce588cd | 817 | config DMA_COHERENT |
1da177e4 LT |
818 | bool |
819 | ||
4ce588cd | 820 | config DMA_IP27 |
1da177e4 LT |
821 | bool |
822 | ||
4ce588cd RB |
823 | config DMA_IP32 |
824 | bool | |
825 | select DMA_NEED_PCI_MAP_STATE | |
826 | ||
827 | config DMA_NONCOHERENT | |
828 | bool | |
829 | select DMA_NEED_PCI_MAP_STATE | |
830 | ||
831 | config DMA_NEED_PCI_MAP_STATE | |
1da177e4 LT |
832 | bool |
833 | ||
5e83d430 RB |
834 | config OWN_DMA |
835 | bool | |
836 | ||
1da177e4 LT |
837 | config EARLY_PRINTK |
838 | bool | |
1da177e4 LT |
839 | |
840 | config GENERIC_ISA_DMA | |
841 | bool | |
1da177e4 LT |
842 | |
843 | config I8259 | |
844 | bool | |
1da177e4 LT |
845 | |
846 | config LIMITED_DMA | |
847 | bool | |
848 | select HIGHMEM | |
797798c1 | 849 | select SYS_SUPPORTS_HIGHMEM |
1da177e4 LT |
850 | |
851 | config MIPS_BONITO64 | |
852 | bool | |
1da177e4 LT |
853 | |
854 | config MIPS_MSC | |
855 | bool | |
1da177e4 LT |
856 | |
857 | config MIPS_NILE4 | |
858 | bool | |
1da177e4 LT |
859 | |
860 | config MIPS_DISABLE_OBSOLETE_IDE | |
861 | bool | |
862 | ||
5e83d430 RB |
863 | # |
864 | # Endianess selection. Suffiently obscure so many users don't know what to | |
865 | # answer,so we try hard to limit the available choices. Also the use of a | |
866 | # choice statement should be more obvious to the user. | |
867 | # | |
868 | choice | |
869 | prompt "Endianess selection" | |
1da177e4 LT |
870 | help |
871 | Some MIPS machines can be configured for either little or big endian | |
5e83d430 RB |
872 | byte order. These modes require different kernels and a different |
873 | Linux distribution. In general there is one prefered byteorder for a | |
874 | particular system but some systems are just as commonly used in the | |
875 | one or the other endianess. | |
876 | ||
877 | config CPU_BIG_ENDIAN | |
878 | bool "Big endian" | |
879 | depends on SYS_SUPPORTS_BIG_ENDIAN | |
880 | ||
881 | config CPU_LITTLE_ENDIAN | |
882 | bool "Little endian" | |
883 | depends on SYS_SUPPORTS_LITTLE_ENDIAN | |
884 | help | |
885 | ||
886 | endchoice | |
887 | ||
888 | config SYS_SUPPORTS_BIG_ENDIAN | |
889 | bool | |
890 | ||
891 | config SYS_SUPPORTS_LITTLE_ENDIAN | |
892 | bool | |
1da177e4 LT |
893 | |
894 | config IRQ_CPU | |
895 | bool | |
896 | ||
897 | config IRQ_CPU_RM7K | |
898 | bool | |
899 | ||
5e83d430 RB |
900 | config IRQ_CPU_RM9K |
901 | bool | |
902 | ||
1da177e4 LT |
903 | config IRQ_MV64340 |
904 | bool | |
905 | ||
906 | config DDB5XXX_COMMON | |
907 | bool | |
1da177e4 LT |
908 | |
909 | config MIPS_BOARDS_GEN | |
910 | bool | |
1da177e4 LT |
911 | |
912 | config MIPS_GT64111 | |
913 | bool | |
1da177e4 LT |
914 | |
915 | config MIPS_GT64120 | |
916 | bool | |
1da177e4 LT |
917 | |
918 | config MIPS_TX3927 | |
919 | bool | |
1da177e4 | 920 | select HAS_TXX9_SERIAL |
1da177e4 LT |
921 | |
922 | config PCI_MARVELL | |
923 | bool | |
924 | ||
925 | config ITE_BOARD_GEN | |
926 | bool | |
5e83d430 RB |
927 | |
928 | config SOC_AU1000 | |
929 | bool | |
930 | select SOC_AU1X00 | |
931 | ||
932 | config SOC_AU1100 | |
933 | bool | |
934 | select SOC_AU1X00 | |
935 | ||
936 | config SOC_AU1500 | |
937 | bool | |
938 | select SOC_AU1X00 | |
939 | ||
940 | config SOC_AU1550 | |
941 | bool | |
942 | select SOC_AU1X00 | |
943 | ||
944 | config SOC_AU1200 | |
945 | bool | |
946 | select SOC_AU1X00 | |
947 | ||
948 | config SOC_AU1X00 | |
949 | bool | |
7cf8053b | 950 | select SYS_HAS_CPU_MIPS32_R1 |
5e83d430 | 951 | select SYS_SUPPORTS_32BIT_KERNEL |
1da177e4 | 952 | |
bdf21b18 PP |
953 | config PNX8550 |
954 | bool | |
955 | select SOC_PNX8550 | |
956 | ||
957 | config SOC_PNX8550 | |
958 | bool | |
bdf21b18 PP |
959 | select DMA_NONCOHERENT |
960 | select HW_HAS_PCI | |
b8c2a77c | 961 | select SYS_HAS_CPU_MIPS32_R1 |
7cf8053b | 962 | select SYS_SUPPORTS_32BIT_KERNEL |
bdf21b18 | 963 | |
1da177e4 LT |
964 | config SWAP_IO_SPACE |
965 | bool | |
966 | ||
967 | # | |
968 | # Unfortunately not all GT64120 systems run the chip at the same clock. | |
969 | # As the user for the clock rate and try to minimize the available options. | |
970 | # | |
971 | choice | |
972 | prompt "Galileo Chip Clock" | |
973 | #default SYSCLK_83 if MIPS_EV64120 | |
974 | depends on MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G | |
975 | default SYSCLK_83 if MIPS_EV64120 | |
976 | default SYSCLK_100 if MOMENCO_OCELOT || MOMENCO_OCELOT_G | |
977 | ||
978 | config SYSCLK_75 | |
979 | bool "75" if MIPS_EV64120 | |
980 | ||
981 | config SYSCLK_83 | |
982 | bool "83.3" if MIPS_EV64120 | |
983 | ||
984 | config SYSCLK_100 | |
985 | bool "100" if MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G | |
986 | ||
987 | endchoice | |
988 | ||
5e83d430 RB |
989 | config ARC32 |
990 | bool | |
991 | ||
1da177e4 LT |
992 | config AU1X00_USB_DEVICE |
993 | bool | |
994 | depends on MIPS_PB1500 || MIPS_PB1100 || MIPS_PB1000 | |
995 | default n | |
996 | ||
997 | config MIPS_GT96100 | |
998 | bool | |
5e83d430 | 999 | select MIPS_GT64120 |
1da177e4 LT |
1000 | |
1001 | config IT8172_CIR | |
1002 | bool | |
1003 | depends on MIPS_ITE8172 || MIPS_IVR | |
1004 | default y | |
1005 | ||
1006 | config IT8712 | |
1007 | bool | |
1008 | depends on MIPS_ITE8172 | |
1009 | default y | |
1010 | ||
1011 | config BOOT_ELF32 | |
1012 | bool | |
1da177e4 LT |
1013 | |
1014 | config MIPS_L1_CACHE_SHIFT | |
1015 | int | |
1016 | default "4" if MACH_DECSTATION | |
1017 | default "7" if SGI_IP27 | |
1018 | default "5" | |
1019 | ||
1da177e4 LT |
1020 | config HAVE_STD_PC_SERIAL_PORT |
1021 | bool | |
1022 | ||
1da177e4 LT |
1023 | config ARC_CONSOLE |
1024 | bool "ARC console support" | |
1025 | depends on SGI_IP22 || SNI_RM200_PCI | |
1026 | ||
1027 | config ARC_MEMORY | |
1028 | bool | |
1029 | depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP32 | |
1030 | default y | |
1031 | ||
1032 | config ARC_PROMLIB | |
1033 | bool | |
1034 | depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32 | |
1035 | default y | |
1036 | ||
1037 | config ARC64 | |
1038 | bool | |
1da177e4 LT |
1039 | |
1040 | config BOOT_ELF64 | |
1041 | bool | |
1da177e4 | 1042 | |
1da177e4 LT |
1043 | config TOSHIBA_BOARDS |
1044 | bool | |
1da177e4 LT |
1045 | |
1046 | menu "CPU selection" | |
1047 | ||
1048 | choice | |
1049 | prompt "CPU type" | |
1050 | default CPU_R4X00 | |
1051 | ||
6e760c8d RB |
1052 | config CPU_MIPS32_R1 |
1053 | bool "MIPS32 Release 1" | |
7cf8053b | 1054 | depends on SYS_HAS_CPU_MIPS32_R1 |
6e760c8d | 1055 | select CPU_HAS_PREFETCH |
797798c1 | 1056 | select CPU_SUPPORTS_32BIT_KERNEL |
ec28f306 | 1057 | select CPU_SUPPORTS_HIGHMEM |
1e5f1caa | 1058 | help |
5e83d430 | 1059 | Choose this option to build a kernel for release 1 or later of the |
1e5f1caa RB |
1060 | MIPS32 architecture. Most modern embedded systems with a 32-bit |
1061 | MIPS processor are based on a MIPS32 processor. If you know the | |
1062 | specific type of processor in your system, choose those that one | |
1063 | otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system. | |
1064 | Release 2 of the MIPS32 architecture is available since several | |
1065 | years so chances are you even have a MIPS32 Release 2 processor | |
1066 | in which case you should choose CPU_MIPS32_R2 instead for better | |
1067 | performance. | |
1068 | ||
1069 | config CPU_MIPS32_R2 | |
1070 | bool "MIPS32 Release 2" | |
7cf8053b | 1071 | depends on SYS_HAS_CPU_MIPS32_R2 |
1e5f1caa | 1072 | select CPU_HAS_PREFETCH |
797798c1 | 1073 | select CPU_SUPPORTS_32BIT_KERNEL |
ec28f306 | 1074 | select CPU_SUPPORTS_HIGHMEM |
6e760c8d | 1075 | help |
5e83d430 | 1076 | Choose this option to build a kernel for release 2 or later of the |
6e760c8d RB |
1077 | MIPS32 architecture. Most modern embedded systems with a 32-bit |
1078 | MIPS processor are based on a MIPS32 processor. If you know the | |
1079 | specific type of processor in your system, choose those that one | |
1080 | otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system. | |
1081 | ||
1082 | config CPU_MIPS64_R1 | |
1083 | bool "MIPS64 Release 1" | |
7cf8053b | 1084 | depends on SYS_HAS_CPU_MIPS64_R1 |
797798c1 | 1085 | select CPU_HAS_PREFETCH |
ed5ba2fb YY |
1086 | select CPU_SUPPORTS_32BIT_KERNEL |
1087 | select CPU_SUPPORTS_64BIT_KERNEL | |
ec28f306 | 1088 | select CPU_SUPPORTS_HIGHMEM |
6e760c8d RB |
1089 | help |
1090 | Choose this option to build a kernel for release 1 or later of the | |
1091 | MIPS64 architecture. Many modern embedded systems with a 64-bit | |
1092 | MIPS processor are based on a MIPS64 processor. If you know the | |
1093 | specific type of processor in your system, choose those that one | |
1094 | otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system. | |
1e5f1caa RB |
1095 | Release 2 of the MIPS64 architecture is available since several |
1096 | years so chances are you even have a MIPS64 Release 2 processor | |
1097 | in which case you should choose CPU_MIPS64_R2 instead for better | |
1098 | performance. | |
1099 | ||
1100 | config CPU_MIPS64_R2 | |
1101 | bool "MIPS64 Release 2" | |
7cf8053b | 1102 | depends on SYS_HAS_CPU_MIPS64_R2 |
797798c1 | 1103 | select CPU_HAS_PREFETCH |
1e5f1caa RB |
1104 | select CPU_SUPPORTS_32BIT_KERNEL |
1105 | select CPU_SUPPORTS_64BIT_KERNEL | |
ec28f306 | 1106 | select CPU_SUPPORTS_HIGHMEM |
1e5f1caa RB |
1107 | help |
1108 | Choose this option to build a kernel for release 2 or later of the | |
1109 | MIPS64 architecture. Many modern embedded systems with a 64-bit | |
1110 | MIPS processor are based on a MIPS64 processor. If you know the | |
1111 | specific type of processor in your system, choose those that one | |
1112 | otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system. | |
1da177e4 LT |
1113 | |
1114 | config CPU_R3000 | |
1115 | bool "R3000" | |
7cf8053b | 1116 | depends on SYS_HAS_CPU_R3000 |
ed5ba2fb | 1117 | select CPU_SUPPORTS_32BIT_KERNEL |
797798c1 | 1118 | select CPU_SUPPORTS_HIGHMEM |
1da177e4 LT |
1119 | help |
1120 | Please make sure to pick the right CPU type. Linux/MIPS is not | |
1121 | designed to be generic, i.e. Kernels compiled for R3000 CPUs will | |
1122 | *not* work on R4000 machines and vice versa. However, since most | |
1123 | of the supported machines have an R4000 (or similar) CPU, R4x00 | |
1124 | might be a safe bet. If the resulting kernel does not work, | |
1125 | try to recompile with R3000. | |
1126 | ||
1127 | config CPU_TX39XX | |
1128 | bool "R39XX" | |
7cf8053b | 1129 | depends on SYS_HAS_CPU_TX39XX |
ed5ba2fb | 1130 | select CPU_SUPPORTS_32BIT_KERNEL |
1da177e4 LT |
1131 | |
1132 | config CPU_VR41XX | |
1133 | bool "R41xx" | |
7cf8053b | 1134 | depends on SYS_HAS_CPU_VR41XX |
ed5ba2fb YY |
1135 | select CPU_SUPPORTS_32BIT_KERNEL |
1136 | select CPU_SUPPORTS_64BIT_KERNEL | |
1da177e4 | 1137 | help |
5e83d430 | 1138 | The options selects support for the NEC VR4100 series of processors. |
1da177e4 LT |
1139 | Only choose this option if you have one of these processors as a |
1140 | kernel built with this option will not run on any other type of | |
1141 | processor or vice versa. | |
1142 | ||
1143 | config CPU_R4300 | |
1144 | bool "R4300" | |
7cf8053b | 1145 | depends on SYS_HAS_CPU_R4300 |
ed5ba2fb YY |
1146 | select CPU_SUPPORTS_32BIT_KERNEL |
1147 | select CPU_SUPPORTS_64BIT_KERNEL | |
1da177e4 LT |
1148 | help |
1149 | MIPS Technologies R4300-series processors. | |
1150 | ||
1151 | config CPU_R4X00 | |
1152 | bool "R4x00" | |
7cf8053b | 1153 | depends on SYS_HAS_CPU_R4X00 |
ed5ba2fb YY |
1154 | select CPU_SUPPORTS_32BIT_KERNEL |
1155 | select CPU_SUPPORTS_64BIT_KERNEL | |
1da177e4 LT |
1156 | help |
1157 | MIPS Technologies R4000-series processors other than 4300, including | |
1158 | the R4000, R4400, R4600, and 4700. | |
1159 | ||
1160 | config CPU_TX49XX | |
1161 | bool "R49XX" | |
7cf8053b | 1162 | depends on SYS_HAS_CPU_TX49XX |
ed5ba2fb YY |
1163 | select CPU_SUPPORTS_32BIT_KERNEL |
1164 | select CPU_SUPPORTS_64BIT_KERNEL | |
1da177e4 LT |
1165 | |
1166 | config CPU_R5000 | |
1167 | bool "R5000" | |
7cf8053b | 1168 | depends on SYS_HAS_CPU_R5000 |
ed5ba2fb YY |
1169 | select CPU_SUPPORTS_32BIT_KERNEL |
1170 | select CPU_SUPPORTS_64BIT_KERNEL | |
1da177e4 LT |
1171 | help |
1172 | MIPS Technologies R5000-series processors other than the Nevada. | |
1173 | ||
1174 | config CPU_R5432 | |
1175 | bool "R5432" | |
7cf8053b | 1176 | depends on SYS_HAS_CPU_R5432 |
5e83d430 RB |
1177 | select CPU_SUPPORTS_32BIT_KERNEL |
1178 | select CPU_SUPPORTS_64BIT_KERNEL | |
1da177e4 LT |
1179 | |
1180 | config CPU_R6000 | |
1181 | bool "R6000" | |
ed5ba2fb | 1182 | depends on EXPERIMENTAL |
7cf8053b | 1183 | depends on SYS_HAS_CPU_R6000 |
ed5ba2fb | 1184 | select CPU_SUPPORTS_32BIT_KERNEL |
1da177e4 LT |
1185 | help |
1186 | MIPS Technologies R6000 and R6000A series processors. Note these | |
1187 | processors are extremly rare and the support for them is incomplete. | |
1188 | ||
1189 | config CPU_NEVADA | |
1190 | bool "RM52xx" | |
7cf8053b | 1191 | depends on SYS_HAS_CPU_NEVADA |
ed5ba2fb YY |
1192 | select CPU_SUPPORTS_32BIT_KERNEL |
1193 | select CPU_SUPPORTS_64BIT_KERNEL | |
1da177e4 LT |
1194 | help |
1195 | QED / PMC-Sierra RM52xx-series ("Nevada") processors. | |
1196 | ||
1197 | config CPU_R8000 | |
1198 | bool "R8000" | |
ed5ba2fb | 1199 | depends on EXPERIMENTAL |
7cf8053b | 1200 | depends on SYS_HAS_CPU_R8000 |
5e83d430 | 1201 | select CPU_HAS_PREFETCH |
ed5ba2fb | 1202 | select CPU_SUPPORTS_64BIT_KERNEL |
1da177e4 LT |
1203 | help |
1204 | MIPS Technologies R8000 processors. Note these processors are | |
1205 | uncommon and the support for them is incomplete. | |
1206 | ||
1207 | config CPU_R10000 | |
1208 | bool "R10000" | |
7cf8053b | 1209 | depends on SYS_HAS_CPU_R10000 |
5e83d430 | 1210 | select CPU_HAS_PREFETCH |
ed5ba2fb YY |
1211 | select CPU_SUPPORTS_32BIT_KERNEL |
1212 | select CPU_SUPPORTS_64BIT_KERNEL | |
797798c1 | 1213 | select CPU_SUPPORTS_HIGHMEM |
1da177e4 LT |
1214 | help |
1215 | MIPS Technologies R10000-series processors. | |
1216 | ||
1217 | config CPU_RM7000 | |
1218 | bool "RM7000" | |
7cf8053b | 1219 | depends on SYS_HAS_CPU_RM7000 |
5e83d430 | 1220 | select CPU_HAS_PREFETCH |
ed5ba2fb YY |
1221 | select CPU_SUPPORTS_32BIT_KERNEL |
1222 | select CPU_SUPPORTS_64BIT_KERNEL | |
797798c1 | 1223 | select CPU_SUPPORTS_HIGHMEM |
1da177e4 LT |
1224 | |
1225 | config CPU_RM9000 | |
1226 | bool "RM9000" | |
7cf8053b | 1227 | depends on SYS_HAS_CPU_RM9000 |
5e83d430 | 1228 | select CPU_HAS_PREFETCH |
ed5ba2fb YY |
1229 | select CPU_SUPPORTS_32BIT_KERNEL |
1230 | select CPU_SUPPORTS_64BIT_KERNEL | |
797798c1 | 1231 | select CPU_SUPPORTS_HIGHMEM |
1da177e4 LT |
1232 | |
1233 | config CPU_SB1 | |
1234 | bool "SB1" | |
7cf8053b | 1235 | depends on SYS_HAS_CPU_SB1 |
ed5ba2fb YY |
1236 | select CPU_SUPPORTS_32BIT_KERNEL |
1237 | select CPU_SUPPORTS_64BIT_KERNEL | |
797798c1 | 1238 | select CPU_SUPPORTS_HIGHMEM |
1da177e4 LT |
1239 | |
1240 | endchoice | |
1241 | ||
7cf8053b RB |
1242 | config SYS_HAS_CPU_MIPS32_R1 |
1243 | bool | |
1244 | ||
1245 | config SYS_HAS_CPU_MIPS32_R2 | |
1246 | bool | |
1247 | ||
1248 | config SYS_HAS_CPU_MIPS64_R1 | |
1249 | bool | |
1250 | ||
1251 | config SYS_HAS_CPU_MIPS64_R2 | |
1252 | bool | |
1253 | ||
1254 | config SYS_HAS_CPU_R3000 | |
1255 | bool | |
1256 | ||
1257 | config SYS_HAS_CPU_TX39XX | |
1258 | bool | |
1259 | ||
1260 | config SYS_HAS_CPU_VR41XX | |
1261 | bool | |
1262 | ||
1263 | config SYS_HAS_CPU_R4300 | |
1264 | bool | |
1265 | ||
1266 | config SYS_HAS_CPU_R4X00 | |
1267 | bool | |
1268 | ||
1269 | config SYS_HAS_CPU_TX49XX | |
1270 | bool | |
1271 | ||
1272 | config SYS_HAS_CPU_R5000 | |
1273 | bool | |
1274 | ||
1275 | config SYS_HAS_CPU_R5432 | |
1276 | bool | |
1277 | ||
1278 | config SYS_HAS_CPU_R6000 | |
1279 | bool | |
1280 | ||
1281 | config SYS_HAS_CPU_NEVADA | |
1282 | bool | |
1283 | ||
1284 | config SYS_HAS_CPU_R8000 | |
1285 | bool | |
1286 | ||
1287 | config SYS_HAS_CPU_R10000 | |
1288 | bool | |
1289 | ||
1290 | config SYS_HAS_CPU_RM7000 | |
1291 | bool | |
1292 | ||
1293 | config SYS_HAS_CPU_RM9000 | |
1294 | bool | |
1295 | ||
1296 | config SYS_HAS_CPU_SB1 | |
1297 | bool | |
1298 | ||
5e83d430 RB |
1299 | endmenu |
1300 | ||
1301 | # | |
1302 | # These two indicate any levelof the MIPS32 and MIPS64 architecture | |
1303 | # | |
1304 | config CPU_MIPS32 | |
1305 | bool | |
1306 | default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 | |
1307 | ||
1308 | config CPU_MIPS64 | |
1309 | bool | |
1310 | default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 | |
1311 | ||
1312 | # | |
1313 | # These two indicate the revision of the architecture, either 32 bot 64 bit. | |
1314 | # | |
1315 | config CPU_MIPSR1 | |
1316 | bool | |
1317 | default y if CPU_MIPS32_R1 || CPU_MIPS64_R1 | |
1318 | ||
1319 | config CPU_MIPSR2 | |
1320 | bool | |
1321 | default y if CPU_MIPS32_R2 || CPU_MIPS64_R2 | |
1322 | ||
1323 | config SYS_SUPPORTS_32BIT_KERNEL | |
1324 | bool | |
1325 | config SYS_SUPPORTS_64BIT_KERNEL | |
1326 | bool | |
1327 | config CPU_SUPPORTS_32BIT_KERNEL | |
1328 | bool | |
1329 | config CPU_SUPPORTS_64BIT_KERNEL | |
1330 | bool | |
1331 | ||
1332 | menu "Kernel type" | |
1333 | ||
1334 | choice | |
1335 | ||
1336 | prompt "Kernel code model" | |
1337 | help | |
1338 | You should only select this option if you have a workload that | |
1339 | actually benefits from 64-bit processing or if your machine has | |
1340 | large memory. You will only be presented a single option in this | |
1341 | menu if your system does not support both 32-bit and 64-bit kernels. | |
1342 | ||
1343 | config 32BIT | |
1344 | bool "32-bit kernel" | |
1345 | depends on CPU_SUPPORTS_32BIT_KERNEL && SYS_SUPPORTS_32BIT_KERNEL | |
1346 | select TRAD_SIGNALS | |
1347 | help | |
1348 | Select this option if you want to build a 32-bit kernel. | |
1349 | config 64BIT | |
1350 | bool "64-bit kernel" | |
1351 | depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL | |
1352 | help | |
1353 | Select this option if you want to build a 64-bit kernel. | |
1354 | ||
1355 | endchoice | |
1356 | ||
1da177e4 LT |
1357 | choice |
1358 | prompt "Kernel page size" | |
1359 | default PAGE_SIZE_4KB | |
1360 | ||
1361 | config PAGE_SIZE_4KB | |
1362 | bool "4kB" | |
1363 | help | |
1364 | This option select the standard 4kB Linux page size. On some | |
1365 | R3000-family processors this is the only available page size. Using | |
1366 | 4kB page size will minimize memory consumption and is therefore | |
1367 | recommended for low memory systems. | |
1368 | ||
1369 | config PAGE_SIZE_8KB | |
1370 | bool "8kB" | |
1371 | depends on EXPERIMENTAL && CPU_R8000 | |
1372 | help | |
1373 | Using 8kB page size will result in higher performance kernel at | |
1374 | the price of higher memory consumption. This option is available | |
1375 | only on the R8000 processor. Not that at the time of this writing | |
1376 | this option is still high experimental; there are also issues with | |
1377 | compatibility of user applications. | |
1378 | ||
1379 | config PAGE_SIZE_16KB | |
1380 | bool "16kB" | |
1381 | depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX | |
1382 | help | |
1383 | Using 16kB page size will result in higher performance kernel at | |
1384 | the price of higher memory consumption. This option is available on | |
1385 | all non-R3000 family processor. Not that at the time of this | |
1386 | writing this option is still high experimental; there are also | |
1387 | issues with compatibility of user applications. | |
1388 | ||
1389 | config PAGE_SIZE_64KB | |
1390 | bool "64kB" | |
1391 | depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX | |
1392 | help | |
1393 | Using 64kB page size will result in higher performance kernel at | |
1394 | the price of higher memory consumption. This option is available on | |
1395 | all non-R3000 family processor. Not that at the time of this | |
1396 | writing this option is still high experimental; there are also | |
1397 | issues with compatibility of user applications. | |
1398 | ||
1399 | endchoice | |
1400 | ||
1401 | config BOARD_SCACHE | |
1402 | bool | |
1403 | ||
1404 | config IP22_CPU_SCACHE | |
1405 | bool | |
1406 | select BOARD_SCACHE | |
1407 | ||
1408 | config R5000_CPU_SCACHE | |
1409 | bool | |
1410 | select BOARD_SCACHE | |
1411 | ||
1412 | config RM7000_CPU_SCACHE | |
1413 | bool | |
1414 | select BOARD_SCACHE | |
1415 | ||
1416 | config SIBYTE_DMA_PAGEOPS | |
1417 | bool "Use DMA to clear/copy pages" | |
1418 | depends on CPU_SB1 | |
1419 | help | |
1420 | Instead of using the CPU to zero and copy pages, use a Data Mover | |
1421 | channel. These DMA channels are otherwise unused by the standard | |
1422 | SiByte Linux port. Seems to give a small performance benefit. | |
1423 | ||
1424 | config CPU_HAS_PREFETCH | |
c8094b53 | 1425 | bool |
1da177e4 | 1426 | |
e01402b1 RB |
1427 | config MIPS_MT |
1428 | bool "Enable MIPS MT" | |
1429 | ||
340ee4b9 RB |
1430 | choice |
1431 | prompt "MIPS MT options" | |
1432 | depends on MIPS_MT | |
1433 | ||
1434 | config MIPS_MT_SMP | |
1435 | bool "Use 1 TC on each available VPE for SMP" | |
1436 | select SMP | |
1437 | ||
e01402b1 RB |
1438 | config MIPS_VPE_LOADER |
1439 | bool "VPE loader support." | |
1440 | depends on MIPS_MT | |
1441 | help | |
1442 | Includes a loader for loading an elf relocatable object | |
1443 | onto another VPE and running it. | |
1444 | ||
340ee4b9 RB |
1445 | endchoice |
1446 | ||
e01402b1 RB |
1447 | config MIPS_VPE_LOADER_TOM |
1448 | bool "Load VPE program into memory hidden from linux" | |
1449 | depends on MIPS_VPE_LOADER | |
1450 | default y | |
1451 | help | |
1452 | The loader can use memory that is present but has been hidden from | |
1453 | Linux using the kernel command line option "mem=xxMB". It's up to | |
1454 | you to ensure the amount you put in the option and the space your | |
1455 | program requires is less or equal to the amount physically present. | |
1456 | ||
1457 | # this should possibly be in drivers/char, but it is rather cpu related. Hmmm | |
1458 | config MIPS_VPE_APSP_API | |
5e83d430 RB |
1459 | bool "Enable support for AP/SP API (RTLX)" |
1460 | depends on MIPS_VPE_LOADER | |
1461 | help | |
e01402b1 | 1462 | |
1da177e4 LT |
1463 | config SB1_PASS_1_WORKAROUNDS |
1464 | bool | |
1465 | depends on CPU_SB1_PASS_1 | |
1466 | default y | |
1467 | ||
1468 | config SB1_PASS_2_WORKAROUNDS | |
1469 | bool | |
1470 | depends on CPU_SB1 && (CPU_SB1_PASS_2_2 || CPU_SB1_PASS_2) | |
1471 | default y | |
1472 | ||
1473 | config SB1_PASS_2_1_WORKAROUNDS | |
1474 | bool | |
1475 | depends on CPU_SB1 && CPU_SB1_PASS_2 | |
1476 | default y | |
1477 | ||
1478 | config 64BIT_PHYS_ADDR | |
1479 | bool "Support for 64-bit physical address space" | |
948928ad | 1480 | depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && 32BIT |
1da177e4 LT |
1481 | |
1482 | config CPU_ADVANCED | |
1483 | bool "Override CPU Options" | |
875d43e7 | 1484 | depends on 32BIT |
1da177e4 LT |
1485 | help |
1486 | Saying yes here allows you to select support for various features | |
1487 | your CPU may or may not have. Most people should say N here. | |
1488 | ||
1489 | config CPU_HAS_LLSC | |
1490 | bool "ll/sc Instructions available" if CPU_ADVANCED | |
1491 | default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX | |
1492 | help | |
1493 | MIPS R4000 series and later provide the Load Linked (ll) | |
1494 | and Store Conditional (sc) instructions. More information is | |
1495 | available at <http://www.go-ecs.com/mips/miptek1.htm>. | |
1496 | ||
1497 | Say Y here if your CPU has the ll and sc instructions. Say Y here | |
1498 | for better performance, N if you don't know. You must say Y here | |
1499 | for multiprocessor machines. | |
1500 | ||
1da177e4 LT |
1501 | config CPU_HAS_WB |
1502 | bool "Writeback Buffer available" if CPU_ADVANCED | |
1503 | default y if !CPU_ADVANCED && CPU_R3000 && MACH_DECSTATION | |
1504 | help | |
1505 | Say N here for slightly better performance. You must say Y here for | |
1506 | machines which require flushing of write buffers in software. Saying | |
1507 | Y is the safe option; N may result in kernel malfunction and crashes. | |
1508 | ||
e01402b1 RB |
1509 | menu "MIPSR2 Interrupt handling" |
1510 | depends on CPU_MIPSR2 && CPU_ADVANCED | |
1511 | ||
1512 | config CPU_MIPSR2_IRQ_VI | |
1513 | bool "Vectored interrupt mode" | |
1514 | help | |
1515 | Vectored interrupt mode allowing faster dispatching of interrupts. | |
1516 | The board support code needs to be written to take advantage of this | |
1517 | mode. Compatibility code is included to allow the kernel to run on | |
1518 | a CPU that does not support vectored interrupts. It's safe to | |
1519 | say Y here. | |
1520 | ||
1521 | config CPU_MIPSR2_IRQ_EI | |
1522 | bool "External interrupt controller mode" | |
1523 | help | |
1524 | Extended interrupt mode takes advantage of an external interrupt | |
1525 | controller to allow fast dispatching from many possible interrupt | |
1526 | sources. Say N unless you know that external interrupt support is | |
1527 | required. | |
1528 | ||
1529 | config CPU_MIPSR2_SRS | |
1530 | bool "Make shadow set registers available for interrupt handlers" | |
1531 | depends on CPU_MIPSR2_IRQ_VI || CPU_MIPSR2_IRQ_EI | |
1532 | help | |
1533 | Allow the kernel to use shadow register sets for fast interrupts. | |
1534 | Interrupt handlers must be specially written to use shadow sets. | |
1535 | Say N unless you know that shadow register set upport is needed. | |
1536 | endmenu | |
1537 | ||
1da177e4 LT |
1538 | config CPU_HAS_SYNC |
1539 | bool | |
1540 | depends on !CPU_R3000 | |
1541 | default y | |
1542 | ||
797798c1 RB |
1543 | # |
1544 | # Use the generic interrupt handling code in kernel/irq/: | |
1545 | # | |
1546 | config GENERIC_HARDIRQS | |
1547 | bool | |
1548 | default y | |
1549 | ||
1550 | config GENERIC_IRQ_PROBE | |
1551 | bool | |
1552 | default y | |
1553 | ||
1da177e4 LT |
1554 | # |
1555 | # - Highmem only makes sense for the 32-bit kernel. | |
1556 | # - The current highmem code will only work properly on physically indexed | |
1557 | # caches such as R3000, SB1, R7000 or those that look like they're virtually | |
1558 | # indexed such as R4000/R4400 SC and MC versions or R10000. So for the | |
1559 | # moment we protect the user and offer the highmem option only on machines | |
1560 | # where it's known to be safe. This will not offer highmem on a few systems | |
1561 | # such as MIPS32 and MIPS64 CPUs which may have virtual and physically | |
1562 | # indexed CPUs but we're playing safe. | |
797798c1 RB |
1563 | # - We use SYS_SUPPORTS_HIGHMEM to offer highmem only for systems where we |
1564 | # know they might have memory configurations that could make use of highmem | |
1565 | # support. | |
1da177e4 LT |
1566 | # |
1567 | config HIGHMEM | |
1568 | bool "High Memory Support" | |
797798c1 RB |
1569 | depends on 32BIT && CPU_SUPPORTS_HIGHMEM && SYS_SUPPORTS_HIGHMEM |
1570 | ||
1571 | config CPU_SUPPORTS_HIGHMEM | |
1572 | bool | |
1573 | ||
1574 | config SYS_SUPPORTS_HIGHMEM | |
1575 | bool | |
1da177e4 | 1576 | |
b4819b59 YY |
1577 | config ARCH_FLATMEM_ENABLE |
1578 | def_bool y | |
1579 | depends on !NUMA | |
1580 | ||
1581 | source "mm/Kconfig" | |
1582 | ||
1da177e4 LT |
1583 | config SMP |
1584 | bool "Multi-Processing support" | |
c1449c8f | 1585 | depends on CPU_RM9000 || ((SIBYTE_BCM1x80 || SIBYTE_BCM1x55 || SIBYTE_SB1250 || QEMU) && !SIBYTE_STANDALONE) || SGI_IP27 || MIPS_MT_SMP |
1da177e4 LT |
1586 | ---help--- |
1587 | This enables support for systems with more than one CPU. If you have | |
1588 | a system with only one CPU, like most personal computers, say N. If | |
1589 | you have a system with more than one CPU, say Y. | |
1590 | ||
1591 | If you say N here, the kernel will run on single and multiprocessor | |
1592 | machines, but will use only one CPU of a multiprocessor machine. If | |
1593 | you say Y here, the kernel will run on many, but not all, | |
1594 | singleprocessor machines. On a singleprocessor machine, the kernel | |
1595 | will run faster if you say N here. | |
1596 | ||
1597 | People using multiprocessor machines who say Y here should also say | |
1598 | Y to "Enhanced Real Time Clock Support", below. | |
1599 | ||
1600 | See also the <file:Documentation/smp.txt> and the SMP-HOWTO | |
1601 | available at <http://www.tldp.org/docs.html#howto>. | |
1602 | ||
1603 | If you don't know what to do here, say N. | |
1604 | ||
1605 | config NR_CPUS | |
1606 | int "Maximum number of CPUs (2-64)" | |
1607 | range 2 64 | |
1608 | depends on SMP | |
1609 | default "64" if SGI_IP27 | |
1610 | default "2" | |
1611 | help | |
1612 | This allows you to specify the maximum number of CPUs which this | |
1613 | kernel will support. The maximum supported value is 32 for 32-bit | |
1614 | kernel and 64 for 64-bit kernels; the minimum value which makes | |
1615 | sense is 2. | |
1616 | ||
1617 | This is purely to save memory - each supported CPU adds | |
1618 | approximately eight kilobytes to the kernel image. | |
1619 | ||
e80de850 | 1620 | source "kernel/Kconfig.preempt" |
1da177e4 LT |
1621 | |
1622 | config RTC_DS1742 | |
1623 | bool "DS1742 BRAM/RTC support" | |
1624 | depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927 | |
1625 | ||
1626 | config MIPS_INSANE_LARGE | |
1627 | bool "Support for large 64-bit configurations" | |
875d43e7 | 1628 | depends on CPU_R10000 && 64BIT |
1da177e4 LT |
1629 | help |
1630 | MIPS R10000 does support a 44 bit / 16TB address space as opposed to | |
1631 | previous 64-bit processors which only supported 40 bit / 1TB. If you | |
1632 | need processes of more than 1TB virtual address space, say Y here. | |
1633 | This will result in additional memory usage, so it is not | |
1634 | recommended for normal users. | |
1635 | ||
5e83d430 RB |
1636 | endmenu |
1637 | ||
1da177e4 LT |
1638 | config RWSEM_GENERIC_SPINLOCK |
1639 | bool | |
1640 | default y | |
1641 | ||
b6c3539b RB |
1642 | source "init/Kconfig" |
1643 | ||
1da177e4 LT |
1644 | menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)" |
1645 | ||
5e83d430 RB |
1646 | config HW_HAS_EISA |
1647 | bool | |
1da177e4 LT |
1648 | config HW_HAS_PCI |
1649 | bool | |
1650 | ||
1651 | config PCI | |
1652 | bool "Support for PCI controller" | |
1653 | depends on HW_HAS_PCI | |
1654 | help | |
1655 | Find out whether you have a PCI motherboard. PCI is the name of a | |
1656 | bus system, i.e. the way the CPU talks to the other stuff inside | |
1657 | your box. Other bus systems are ISA, EISA, or VESA. If you have PCI, | |
1658 | say Y, otherwise N. | |
1659 | ||
1660 | The PCI-HOWTO, available from | |
1661 | <http://www.tldp.org/docs.html#howto>, contains valuable | |
1662 | information about which PCI hardware does work under Linux and which | |
1663 | doesn't. | |
1664 | ||
1665 | config PCI_DOMAINS | |
1666 | bool | |
1667 | depends on PCI | |
1668 | ||
1669 | source "drivers/pci/Kconfig" | |
1670 | ||
1671 | # | |
1672 | # ISA support is now enabled via select. Too many systems still have the one | |
1673 | # or other ISA chip on the board that users don't know about so don't expect | |
1674 | # users to choose the right thing ... | |
1675 | # | |
1676 | config ISA | |
1677 | bool | |
1678 | ||
1679 | config EISA | |
1680 | bool "EISA support" | |
5e83d430 | 1681 | depends on HW_HAS_EISA |
1da177e4 LT |
1682 | select ISA |
1683 | ---help--- | |
1684 | The Extended Industry Standard Architecture (EISA) bus was | |
1685 | developed as an open alternative to the IBM MicroChannel bus. | |
1686 | ||
1687 | The EISA bus provided some of the features of the IBM MicroChannel | |
1688 | bus while maintaining backward compatibility with cards made for | |
1689 | the older ISA bus. The EISA bus saw limited use between 1988 and | |
1690 | 1995 when it was made obsolete by the PCI bus. | |
1691 | ||
1692 | Say Y here if you are building a kernel for an EISA-based machine. | |
1693 | ||
1694 | Otherwise, say N. | |
1695 | ||
1696 | source "drivers/eisa/Kconfig" | |
1697 | ||
1698 | config TC | |
1699 | bool "TURBOchannel support" | |
1700 | depends on MACH_DECSTATION | |
1701 | help | |
1702 | TurboChannel is a DEC (now Compaq (now HP)) bus for Alpha and MIPS | |
1703 | processors. Documentation on writing device drivers for TurboChannel | |
1704 | is available at: | |
1705 | <http://www.cs.arizona.edu/computer.help/policy/DIGITAL_unix/AA-PS3HD-TET1_html/TITLE.html>. | |
1706 | ||
1707 | #config ACCESSBUS | |
1708 | # bool "Access.Bus support" | |
1709 | # depends on TC | |
1710 | ||
1711 | config MMU | |
1712 | bool | |
1713 | default y | |
1714 | ||
1da177e4 LT |
1715 | source "drivers/pcmcia/Kconfig" |
1716 | ||
1717 | source "drivers/pci/hotplug/Kconfig" | |
1718 | ||
1719 | endmenu | |
1720 | ||
1721 | menu "Executable file formats" | |
1722 | ||
1723 | source "fs/Kconfig.binfmt" | |
1724 | ||
1725 | config TRAD_SIGNALS | |
1726 | bool | |
1da177e4 LT |
1727 | |
1728 | config BUILD_ELF64 | |
1729 | bool "Use 64-bit ELF format for building" | |
875d43e7 | 1730 | depends on 64BIT |
1da177e4 LT |
1731 | help |
1732 | A 64-bit kernel is usually built using the 64-bit ELF binary object | |
1733 | format as it's one that allows arbitrary 64-bit constructs. For | |
1734 | kernels that are loaded within the KSEG compatibility segments the | |
1735 | 32-bit ELF format can optionally be used resulting in a somewhat | |
1736 | smaller binary, but this option is not explicitly supported by the | |
1737 | toolchain and since binutils 2.14 it does not even work at all. | |
1738 | ||
1739 | Say Y to use the 64-bit format or N to use the 32-bit one. | |
1740 | ||
1741 | If unsure say Y. | |
1742 | ||
1743 | config BINFMT_IRIX | |
1744 | bool "Include IRIX binary compatibility" | |
5e83d430 | 1745 | depends on CPU_BIG_ENDIAN && 32BIT && BROKEN |
1da177e4 LT |
1746 | |
1747 | config MIPS32_COMPAT | |
1748 | bool "Kernel support for Linux/MIPS 32-bit binary compatibility" | |
875d43e7 | 1749 | depends on 64BIT |
1da177e4 LT |
1750 | help |
1751 | Select this option if you want Linux/MIPS 32-bit binary | |
1752 | compatibility. Since all software available for Linux/MIPS is | |
1753 | currently 32-bit you should say Y here. | |
1754 | ||
1755 | config COMPAT | |
1756 | bool | |
1757 | depends on MIPS32_COMPAT | |
1758 | default y | |
1759 | ||
1760 | config MIPS32_O32 | |
1761 | bool "Kernel support for o32 binaries" | |
1762 | depends on MIPS32_COMPAT | |
1763 | help | |
1764 | Select this option if you want to run o32 binaries. These are pure | |
1765 | 32-bit binaries as used by the 32-bit Linux/MIPS port. Most of | |
1766 | existing binaries are in this format. | |
1767 | ||
1768 | If unsure, say Y. | |
1769 | ||
1770 | config MIPS32_N32 | |
1771 | bool "Kernel support for n32 binaries" | |
1772 | depends on MIPS32_COMPAT | |
1773 | help | |
1774 | Select this option if you want to run n32 binaries. These are | |
1775 | 64-bit binaries using 32-bit quantities for addressing and certain | |
1776 | data that would normally be 64-bit. They are used in special | |
1777 | cases. | |
1778 | ||
1779 | If unsure, say N. | |
1780 | ||
1781 | config BINFMT_ELF32 | |
1782 | bool | |
1783 | default y if MIPS32_O32 || MIPS32_N32 | |
1784 | ||
127c6f66 RB |
1785 | config SECCOMP |
1786 | bool "Enable seccomp to safely compute untrusted bytecode" | |
1787 | depends on PROC_FS && BROKEN | |
1788 | default y | |
1789 | help | |
1790 | This kernel feature is useful for number crunching applications | |
1791 | that may need to compute untrusted bytecode during their | |
1792 | execution. By using pipes or other transports made available to | |
1793 | the process as file descriptors supporting the read/write | |
1794 | syscalls, it's possible to isolate those applications in | |
1795 | their own address space using seccomp. Once seccomp is | |
1796 | enabled via /proc/<pid>/seccomp, it cannot be disabled | |
1797 | and the task is only allowed to execute a few safe syscalls | |
1798 | defined by each seccomp mode. | |
1799 | ||
1800 | If unsure, say Y. Only embedded should say N here. | |
1801 | ||
1da177e4 LT |
1802 | config PM |
1803 | bool "Power Management support (EXPERIMENTAL)" | |
5e83d430 | 1804 | depends on EXPERIMENTAL && SOC_AU1X00 |
1da177e4 LT |
1805 | |
1806 | endmenu | |
1807 | ||
d5950b43 SR |
1808 | source "net/Kconfig" |
1809 | ||
1da177e4 LT |
1810 | source "drivers/Kconfig" |
1811 | ||
1812 | source "fs/Kconfig" | |
1813 | ||
5e83d430 RB |
1814 | source "arch/mips/oprofile/Kconfig" |
1815 | ||
1da177e4 LT |
1816 | source "arch/mips/Kconfig.debug" |
1817 | ||
1818 | source "security/Kconfig" | |
1819 | ||
1820 | source "crypto/Kconfig" | |
1821 | ||
1822 | source "lib/Kconfig" |