Commit | Line | Data |
---|---|---|
9994a338 PM |
1 | /* |
2 | * This file contains miscellaneous low-level functions. | |
3 | * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) | |
4 | * | |
5 | * Largely rewritten by Cort Dougan (cort@cs.nmt.edu) | |
6 | * and Paul Mackerras. | |
7 | * | |
3d1229d6 ME |
8 | * kexec bits: |
9 | * Copyright (C) 2002-2003 Eric Biederman <ebiederm@xmission.com> | |
10 | * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz | |
11 | * | |
9994a338 PM |
12 | * This program is free software; you can redistribute it and/or |
13 | * modify it under the terms of the GNU General Public License | |
14 | * as published by the Free Software Foundation; either version | |
15 | * 2 of the License, or (at your option) any later version. | |
16 | * | |
17 | */ | |
18 | ||
9994a338 PM |
19 | #include <linux/sys.h> |
20 | #include <asm/unistd.h> | |
21 | #include <asm/errno.h> | |
22 | #include <asm/reg.h> | |
23 | #include <asm/page.h> | |
24 | #include <asm/cache.h> | |
25 | #include <asm/cputable.h> | |
26 | #include <asm/mmu.h> | |
27 | #include <asm/ppc_asm.h> | |
28 | #include <asm/thread_info.h> | |
29 | #include <asm/asm-offsets.h> | |
3d1229d6 ME |
30 | #include <asm/processor.h> |
31 | #include <asm/kexec.h> | |
f048aace | 32 | #include <asm/bug.h> |
9994a338 PM |
33 | |
34 | .text | |
35 | ||
85218827 KG |
36 | #ifdef CONFIG_IRQSTACKS |
37 | _GLOBAL(call_do_softirq) | |
38 | mflr r0 | |
39 | stw r0,4(r1) | |
40 | stwu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r3) | |
41 | mr r1,r3 | |
42 | bl __do_softirq | |
43 | lwz r1,0(r1) | |
44 | lwz r0,4(r1) | |
45 | mtlr r0 | |
46 | blr | |
47 | ||
48 | _GLOBAL(call_handle_irq) | |
49 | mflr r0 | |
50 | stw r0,4(r1) | |
51 | mtctr r6 | |
52 | stwu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r5) | |
53 | mr r1,r5 | |
54 | bctrl | |
55 | lwz r1,0(r1) | |
56 | lwz r0,4(r1) | |
57 | mtlr r0 | |
58 | blr | |
59 | #endif /* CONFIG_IRQSTACKS */ | |
60 | ||
f2783c15 PM |
61 | /* |
62 | * This returns the high 64 bits of the product of two 64-bit numbers. | |
63 | */ | |
64 | _GLOBAL(mulhdu) | |
65 | cmpwi r6,0 | |
66 | cmpwi cr1,r3,0 | |
67 | mr r10,r4 | |
68 | mulhwu r4,r4,r5 | |
69 | beq 1f | |
70 | mulhwu r0,r10,r6 | |
71 | mullw r7,r10,r5 | |
72 | addc r7,r0,r7 | |
73 | addze r4,r4 | |
74 | 1: beqlr cr1 /* all done if high part of A is 0 */ | |
75 | mr r10,r3 | |
76 | mullw r9,r3,r5 | |
77 | mulhwu r3,r3,r5 | |
78 | beq 2f | |
79 | mullw r0,r10,r6 | |
80 | mulhwu r8,r10,r6 | |
81 | addc r7,r0,r7 | |
82 | adde r4,r4,r8 | |
83 | addze r3,r3 | |
84 | 2: addc r4,r4,r9 | |
85 | addze r3,r3 | |
86 | blr | |
87 | ||
9994a338 PM |
88 | /* |
89 | * sub_reloc_offset(x) returns x - reloc_offset(). | |
90 | */ | |
91 | _GLOBAL(sub_reloc_offset) | |
92 | mflr r0 | |
93 | bl 1f | |
94 | 1: mflr r5 | |
95 | lis r4,1b@ha | |
96 | addi r4,r4,1b@l | |
97 | subf r5,r4,r5 | |
98 | subf r3,r5,r3 | |
99 | mtlr r0 | |
100 | blr | |
101 | ||
102 | /* | |
103 | * reloc_got2 runs through the .got2 section adding an offset | |
104 | * to each entry. | |
105 | */ | |
106 | _GLOBAL(reloc_got2) | |
107 | mflr r11 | |
108 | lis r7,__got2_start@ha | |
109 | addi r7,r7,__got2_start@l | |
110 | lis r8,__got2_end@ha | |
111 | addi r8,r8,__got2_end@l | |
112 | subf r8,r7,r8 | |
113 | srwi. r8,r8,2 | |
114 | beqlr | |
115 | mtctr r8 | |
116 | bl 1f | |
117 | 1: mflr r0 | |
118 | lis r4,1b@ha | |
119 | addi r4,r4,1b@l | |
120 | subf r0,r4,r0 | |
121 | add r7,r0,r7 | |
122 | 2: lwz r0,0(r7) | |
123 | add r0,r0,r3 | |
124 | stw r0,0(r7) | |
125 | addi r7,r7,4 | |
126 | bdnz 2b | |
127 | mtlr r11 | |
128 | blr | |
129 | ||
9994a338 PM |
130 | /* |
131 | * call_setup_cpu - call the setup_cpu function for this cpu | |
132 | * r3 = data offset, r24 = cpu number | |
133 | * | |
134 | * Setup function is called with: | |
135 | * r3 = data offset | |
136 | * r4 = ptr to CPU spec (relocated) | |
137 | */ | |
138 | _GLOBAL(call_setup_cpu) | |
139 | addis r4,r3,cur_cpu_spec@ha | |
140 | addi r4,r4,cur_cpu_spec@l | |
141 | lwz r4,0(r4) | |
142 | add r4,r4,r3 | |
143 | lwz r5,CPU_SPEC_SETUP(r4) | |
b26f100d | 144 | cmpwi 0,r5,0 |
9994a338 PM |
145 | add r5,r5,r3 |
146 | beqlr | |
147 | mtctr r5 | |
148 | bctr | |
149 | ||
150 | #if defined(CONFIG_CPU_FREQ_PMAC) && defined(CONFIG_6xx) | |
151 | ||
152 | /* This gets called by via-pmu.c to switch the PLL selection | |
153 | * on 750fx CPU. This function should really be moved to some | |
154 | * other place (as most of the cpufreq code in via-pmu | |
155 | */ | |
156 | _GLOBAL(low_choose_750fx_pll) | |
157 | /* Clear MSR:EE */ | |
158 | mfmsr r7 | |
159 | rlwinm r0,r7,0,17,15 | |
160 | mtmsr r0 | |
161 | ||
162 | /* If switching to PLL1, disable HID0:BTIC */ | |
163 | cmplwi cr0,r3,0 | |
164 | beq 1f | |
165 | mfspr r5,SPRN_HID0 | |
166 | rlwinm r5,r5,0,27,25 | |
167 | sync | |
168 | mtspr SPRN_HID0,r5 | |
169 | isync | |
170 | sync | |
171 | ||
172 | 1: | |
173 | /* Calc new HID1 value */ | |
174 | mfspr r4,SPRN_HID1 /* Build a HID1:PS bit from parameter */ | |
175 | rlwinm r5,r3,16,15,15 /* Clear out HID1:PS from value read */ | |
176 | rlwinm r4,r4,0,16,14 /* Could have I used rlwimi here ? */ | |
177 | or r4,r4,r5 | |
178 | mtspr SPRN_HID1,r4 | |
179 | ||
180 | /* Store new HID1 image */ | |
f608600e | 181 | rlwinm r6,r1,0,0,(31-THREAD_SHIFT) |
9994a338 PM |
182 | lwz r6,TI_CPU(r6) |
183 | slwi r6,r6,2 | |
184 | addis r6,r6,nap_save_hid1@ha | |
185 | stw r4,nap_save_hid1@l(r6) | |
186 | ||
187 | /* If switching to PLL0, enable HID0:BTIC */ | |
188 | cmplwi cr0,r3,0 | |
189 | bne 1f | |
190 | mfspr r5,SPRN_HID0 | |
191 | ori r5,r5,HID0_BTIC | |
192 | sync | |
193 | mtspr SPRN_HID0,r5 | |
194 | isync | |
195 | sync | |
196 | ||
197 | 1: | |
198 | /* Return */ | |
199 | mtmsr r7 | |
200 | blr | |
201 | ||
202 | _GLOBAL(low_choose_7447a_dfs) | |
203 | /* Clear MSR:EE */ | |
204 | mfmsr r7 | |
205 | rlwinm r0,r7,0,17,15 | |
206 | mtmsr r0 | |
207 | ||
208 | /* Calc new HID1 value */ | |
209 | mfspr r4,SPRN_HID1 | |
210 | insrwi r4,r3,1,9 /* insert parameter into bit 9 */ | |
211 | sync | |
212 | mtspr SPRN_HID1,r4 | |
213 | sync | |
214 | isync | |
215 | ||
216 | /* Return */ | |
217 | mtmsr r7 | |
218 | blr | |
219 | ||
220 | #endif /* CONFIG_CPU_FREQ_PMAC && CONFIG_6xx */ | |
221 | ||
222 | /* | |
223 | * complement mask on the msr then "or" some values on. | |
224 | * _nmask_and_or_msr(nmask, value_to_or) | |
225 | */ | |
226 | _GLOBAL(_nmask_and_or_msr) | |
227 | mfmsr r0 /* Get current msr */ | |
228 | andc r0,r0,r3 /* And off the bits set in r3 (first parm) */ | |
229 | or r0,r0,r4 /* Or on the bits in r4 (second parm) */ | |
230 | SYNC /* Some chip revs have problems here... */ | |
231 | mtmsr r0 /* Update machine state */ | |
232 | isync | |
233 | blr /* Done */ | |
234 | ||
9dae8afd BH |
235 | #ifdef CONFIG_40x |
236 | ||
237 | /* | |
238 | * Do an IO access in real mode | |
239 | */ | |
240 | _GLOBAL(real_readb) | |
241 | mfmsr r7 | |
242 | ori r0,r7,MSR_DR | |
243 | xori r0,r0,MSR_DR | |
244 | sync | |
245 | mtmsr r0 | |
246 | sync | |
247 | isync | |
248 | lbz r3,0(r3) | |
249 | sync | |
250 | mtmsr r7 | |
251 | sync | |
252 | isync | |
253 | blr | |
254 | ||
255 | /* | |
256 | * Do an IO access in real mode | |
257 | */ | |
258 | _GLOBAL(real_writeb) | |
259 | mfmsr r7 | |
260 | ori r0,r7,MSR_DR | |
261 | xori r0,r0,MSR_DR | |
262 | sync | |
263 | mtmsr r0 | |
264 | sync | |
265 | isync | |
266 | stb r3,0(r4) | |
267 | sync | |
268 | mtmsr r7 | |
269 | sync | |
270 | isync | |
271 | blr | |
272 | ||
273 | #endif /* CONFIG_40x */ | |
9994a338 | 274 | |
0ba3418b | 275 | |
9994a338 PM |
276 | /* |
277 | * Flush instruction cache. | |
278 | * This is a no-op on the 601. | |
279 | */ | |
280 | _GLOBAL(flush_instruction_cache) | |
281 | #if defined(CONFIG_8xx) | |
282 | isync | |
283 | lis r5, IDC_INVALL@h | |
284 | mtspr SPRN_IC_CST, r5 | |
285 | #elif defined(CONFIG_4xx) | |
286 | #ifdef CONFIG_403GCX | |
287 | li r3, 512 | |
288 | mtctr r3 | |
289 | lis r4, KERNELBASE@h | |
290 | 1: iccci 0, r4 | |
291 | addi r4, r4, 16 | |
292 | bdnz 1b | |
293 | #else | |
294 | lis r3, KERNELBASE@h | |
295 | iccci 0,r3 | |
296 | #endif | |
297 | #elif CONFIG_FSL_BOOKE | |
298 | BEGIN_FTR_SECTION | |
299 | mfspr r3,SPRN_L1CSR0 | |
300 | ori r3,r3,L1CSR0_CFI|L1CSR0_CLFC | |
301 | /* msync; isync recommended here */ | |
302 | mtspr SPRN_L1CSR0,r3 | |
303 | isync | |
304 | blr | |
4508dc21 | 305 | END_FTR_SECTION_IFSET(CPU_FTR_UNIFIED_ID_CACHE) |
9994a338 PM |
306 | mfspr r3,SPRN_L1CSR1 |
307 | ori r3,r3,L1CSR1_ICFI|L1CSR1_ICLFR | |
308 | mtspr SPRN_L1CSR1,r3 | |
309 | #else | |
310 | mfspr r3,SPRN_PVR | |
311 | rlwinm r3,r3,16,16,31 | |
312 | cmpwi 0,r3,1 | |
313 | beqlr /* for 601, do nothing */ | |
314 | /* 603/604 processor - use invalidate-all bit in HID0 */ | |
315 | mfspr r3,SPRN_HID0 | |
316 | ori r3,r3,HID0_ICFI | |
317 | mtspr SPRN_HID0,r3 | |
318 | #endif /* CONFIG_8xx/4xx */ | |
319 | isync | |
320 | blr | |
321 | ||
322 | /* | |
323 | * Write any modified data cache blocks out to memory | |
324 | * and invalidate the corresponding instruction cache blocks. | |
325 | * This is a no-op on the 601. | |
326 | * | |
327 | * flush_icache_range(unsigned long start, unsigned long stop) | |
328 | */ | |
b76e59d1 | 329 | _KPROBE(__flush_icache_range) |
9994a338 PM |
330 | BEGIN_FTR_SECTION |
331 | blr /* for 601, do nothing */ | |
4508dc21 | 332 | END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE) |
7dffb720 | 333 | li r5,L1_CACHE_BYTES-1 |
9994a338 PM |
334 | andc r3,r3,r5 |
335 | subf r4,r3,r4 | |
336 | add r4,r4,r5 | |
7dffb720 | 337 | srwi. r4,r4,L1_CACHE_SHIFT |
9994a338 PM |
338 | beqlr |
339 | mtctr r4 | |
340 | mr r6,r3 | |
341 | 1: dcbst 0,r3 | |
7dffb720 | 342 | addi r3,r3,L1_CACHE_BYTES |
9994a338 PM |
343 | bdnz 1b |
344 | sync /* wait for dcbst's to get to ram */ | |
14d75752 | 345 | #ifndef CONFIG_44x |
9994a338 PM |
346 | mtctr r4 |
347 | 2: icbi 0,r6 | |
7dffb720 | 348 | addi r6,r6,L1_CACHE_BYTES |
9994a338 | 349 | bdnz 2b |
14d75752 JB |
350 | #else |
351 | /* Flash invalidate on 44x because we are passed kmapped addresses and | |
352 | this doesn't work for userspace pages due to the virtually tagged | |
353 | icache. Sigh. */ | |
354 | iccci 0, r0 | |
355 | #endif | |
9994a338 PM |
356 | sync /* additional sync needed on g4 */ |
357 | isync | |
358 | blr | |
359 | /* | |
360 | * Write any modified data cache blocks out to memory. | |
361 | * Does not invalidate the corresponding cache lines (especially for | |
362 | * any corresponding instruction cache). | |
363 | * | |
364 | * clean_dcache_range(unsigned long start, unsigned long stop) | |
365 | */ | |
366 | _GLOBAL(clean_dcache_range) | |
7dffb720 | 367 | li r5,L1_CACHE_BYTES-1 |
9994a338 PM |
368 | andc r3,r3,r5 |
369 | subf r4,r3,r4 | |
370 | add r4,r4,r5 | |
7dffb720 | 371 | srwi. r4,r4,L1_CACHE_SHIFT |
9994a338 PM |
372 | beqlr |
373 | mtctr r4 | |
374 | ||
375 | 1: dcbst 0,r3 | |
7dffb720 | 376 | addi r3,r3,L1_CACHE_BYTES |
9994a338 PM |
377 | bdnz 1b |
378 | sync /* wait for dcbst's to get to ram */ | |
379 | blr | |
380 | ||
381 | /* | |
382 | * Write any modified data cache blocks out to memory and invalidate them. | |
383 | * Does not invalidate the corresponding instruction cache blocks. | |
384 | * | |
385 | * flush_dcache_range(unsigned long start, unsigned long stop) | |
386 | */ | |
387 | _GLOBAL(flush_dcache_range) | |
7dffb720 | 388 | li r5,L1_CACHE_BYTES-1 |
9994a338 PM |
389 | andc r3,r3,r5 |
390 | subf r4,r3,r4 | |
391 | add r4,r4,r5 | |
7dffb720 | 392 | srwi. r4,r4,L1_CACHE_SHIFT |
9994a338 PM |
393 | beqlr |
394 | mtctr r4 | |
395 | ||
396 | 1: dcbf 0,r3 | |
7dffb720 | 397 | addi r3,r3,L1_CACHE_BYTES |
9994a338 PM |
398 | bdnz 1b |
399 | sync /* wait for dcbst's to get to ram */ | |
400 | blr | |
401 | ||
402 | /* | |
403 | * Like above, but invalidate the D-cache. This is used by the 8xx | |
404 | * to invalidate the cache so the PPC core doesn't get stale data | |
405 | * from the CPM (no cache snooping here :-). | |
406 | * | |
407 | * invalidate_dcache_range(unsigned long start, unsigned long stop) | |
408 | */ | |
409 | _GLOBAL(invalidate_dcache_range) | |
7dffb720 | 410 | li r5,L1_CACHE_BYTES-1 |
9994a338 PM |
411 | andc r3,r3,r5 |
412 | subf r4,r3,r4 | |
413 | add r4,r4,r5 | |
7dffb720 | 414 | srwi. r4,r4,L1_CACHE_SHIFT |
9994a338 PM |
415 | beqlr |
416 | mtctr r4 | |
417 | ||
418 | 1: dcbi 0,r3 | |
7dffb720 | 419 | addi r3,r3,L1_CACHE_BYTES |
9994a338 PM |
420 | bdnz 1b |
421 | sync /* wait for dcbi's to get to ram */ | |
422 | blr | |
423 | ||
9994a338 PM |
424 | /* |
425 | * Flush a particular page from the data cache to RAM. | |
426 | * Note: this is necessary because the instruction cache does *not* | |
427 | * snoop from the data cache. | |
428 | * This is a no-op on the 601 which has a unified cache. | |
429 | * | |
430 | * void __flush_dcache_icache(void *page) | |
431 | */ | |
432 | _GLOBAL(__flush_dcache_icache) | |
433 | BEGIN_FTR_SECTION | |
4508dc21 DG |
434 | blr |
435 | END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE) | |
ca9153a3 IY |
436 | rlwinm r3,r3,0,0,31-PAGE_SHIFT /* Get page base address */ |
437 | li r4,PAGE_SIZE/L1_CACHE_BYTES /* Number of lines in a page */ | |
9994a338 PM |
438 | mtctr r4 |
439 | mr r6,r3 | |
440 | 0: dcbst 0,r3 /* Write line to ram */ | |
7dffb720 | 441 | addi r3,r3,L1_CACHE_BYTES |
9994a338 PM |
442 | bdnz 0b |
443 | sync | |
b98ac05d BH |
444 | #ifndef CONFIG_44x |
445 | /* We don't flush the icache on 44x. Those have a virtual icache | |
446 | * and we don't have access to the virtual address here (it's | |
447 | * not the page vaddr but where it's mapped in user space). The | |
448 | * flushing of the icache on these is handled elsewhere, when | |
449 | * a change in the address space occurs, before returning to | |
450 | * user space | |
451 | */ | |
9994a338 PM |
452 | mtctr r4 |
453 | 1: icbi 0,r6 | |
7dffb720 | 454 | addi r6,r6,L1_CACHE_BYTES |
9994a338 PM |
455 | bdnz 1b |
456 | sync | |
457 | isync | |
b98ac05d | 458 | #endif /* CONFIG_44x */ |
9994a338 PM |
459 | blr |
460 | ||
461 | /* | |
462 | * Flush a particular page from the data cache to RAM, identified | |
463 | * by its physical address. We turn off the MMU so we can just use | |
464 | * the physical address (this may be a highmem page without a kernel | |
465 | * mapping). | |
466 | * | |
467 | * void __flush_dcache_icache_phys(unsigned long physaddr) | |
468 | */ | |
469 | _GLOBAL(__flush_dcache_icache_phys) | |
470 | BEGIN_FTR_SECTION | |
471 | blr /* for 601, do nothing */ | |
4508dc21 | 472 | END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE) |
9994a338 PM |
473 | mfmsr r10 |
474 | rlwinm r0,r10,0,28,26 /* clear DR */ | |
475 | mtmsr r0 | |
476 | isync | |
ca9153a3 IY |
477 | rlwinm r3,r3,0,0,31-PAGE_SHIFT /* Get page base address */ |
478 | li r4,PAGE_SIZE/L1_CACHE_BYTES /* Number of lines in a page */ | |
9994a338 PM |
479 | mtctr r4 |
480 | mr r6,r3 | |
481 | 0: dcbst 0,r3 /* Write line to ram */ | |
7dffb720 | 482 | addi r3,r3,L1_CACHE_BYTES |
9994a338 PM |
483 | bdnz 0b |
484 | sync | |
485 | mtctr r4 | |
486 | 1: icbi 0,r6 | |
7dffb720 | 487 | addi r6,r6,L1_CACHE_BYTES |
9994a338 PM |
488 | bdnz 1b |
489 | sync | |
490 | mtmsr r10 /* restore DR */ | |
491 | isync | |
492 | blr | |
493 | ||
494 | /* | |
495 | * Clear pages using the dcbz instruction, which doesn't cause any | |
496 | * memory traffic (except to write out any cache lines which get | |
497 | * displaced). This only works on cacheable memory. | |
498 | * | |
499 | * void clear_pages(void *page, int order) ; | |
500 | */ | |
501 | _GLOBAL(clear_pages) | |
ca9153a3 | 502 | li r0,PAGE_SIZE/L1_CACHE_BYTES |
9994a338 PM |
503 | slw r0,r0,r4 |
504 | mtctr r0 | |
9994a338 | 505 | 1: dcbz 0,r3 |
7dffb720 | 506 | addi r3,r3,L1_CACHE_BYTES |
9994a338 PM |
507 | bdnz 1b |
508 | blr | |
509 | ||
510 | /* | |
511 | * Copy a whole page. We use the dcbz instruction on the destination | |
512 | * to reduce memory traffic (it eliminates the unnecessary reads of | |
513 | * the destination into cache). This requires that the destination | |
514 | * is cacheable. | |
515 | */ | |
516 | #define COPY_16_BYTES \ | |
517 | lwz r6,4(r4); \ | |
518 | lwz r7,8(r4); \ | |
519 | lwz r8,12(r4); \ | |
520 | lwzu r9,16(r4); \ | |
521 | stw r6,4(r3); \ | |
522 | stw r7,8(r3); \ | |
523 | stw r8,12(r3); \ | |
524 | stwu r9,16(r3) | |
525 | ||
526 | _GLOBAL(copy_page) | |
527 | addi r3,r3,-4 | |
528 | addi r4,r4,-4 | |
529 | ||
9994a338 PM |
530 | li r5,4 |
531 | ||
532 | #if MAX_COPY_PREFETCH > 1 | |
533 | li r0,MAX_COPY_PREFETCH | |
534 | li r11,4 | |
535 | mtctr r0 | |
536 | 11: dcbt r11,r4 | |
7dffb720 | 537 | addi r11,r11,L1_CACHE_BYTES |
9994a338 PM |
538 | bdnz 11b |
539 | #else /* MAX_COPY_PREFETCH == 1 */ | |
540 | dcbt r5,r4 | |
7dffb720 | 541 | li r11,L1_CACHE_BYTES+4 |
9994a338 | 542 | #endif /* MAX_COPY_PREFETCH */ |
ca9153a3 | 543 | li r0,PAGE_SIZE/L1_CACHE_BYTES - MAX_COPY_PREFETCH |
9994a338 PM |
544 | crclr 4*cr0+eq |
545 | 2: | |
546 | mtctr r0 | |
547 | 1: | |
548 | dcbt r11,r4 | |
549 | dcbz r5,r3 | |
550 | COPY_16_BYTES | |
7dffb720 | 551 | #if L1_CACHE_BYTES >= 32 |
9994a338 | 552 | COPY_16_BYTES |
7dffb720 | 553 | #if L1_CACHE_BYTES >= 64 |
9994a338 PM |
554 | COPY_16_BYTES |
555 | COPY_16_BYTES | |
7dffb720 | 556 | #if L1_CACHE_BYTES >= 128 |
9994a338 PM |
557 | COPY_16_BYTES |
558 | COPY_16_BYTES | |
559 | COPY_16_BYTES | |
560 | COPY_16_BYTES | |
561 | #endif | |
562 | #endif | |
563 | #endif | |
564 | bdnz 1b | |
565 | beqlr | |
566 | crnot 4*cr0+eq,4*cr0+eq | |
567 | li r0,MAX_COPY_PREFETCH | |
568 | li r11,4 | |
569 | b 2b | |
9994a338 PM |
570 | |
571 | /* | |
572 | * void atomic_clear_mask(atomic_t mask, atomic_t *addr) | |
573 | * void atomic_set_mask(atomic_t mask, atomic_t *addr); | |
574 | */ | |
575 | _GLOBAL(atomic_clear_mask) | |
576 | 10: lwarx r5,0,r4 | |
577 | andc r5,r5,r3 | |
578 | PPC405_ERR77(0,r4) | |
579 | stwcx. r5,0,r4 | |
580 | bne- 10b | |
581 | blr | |
582 | _GLOBAL(atomic_set_mask) | |
583 | 10: lwarx r5,0,r4 | |
584 | or r5,r5,r3 | |
585 | PPC405_ERR77(0,r4) | |
586 | stwcx. r5,0,r4 | |
587 | bne- 10b | |
588 | blr | |
589 | ||
9994a338 PM |
590 | /* |
591 | * Extended precision shifts. | |
592 | * | |
593 | * Updated to be valid for shift counts from 0 to 63 inclusive. | |
594 | * -- Gabriel | |
595 | * | |
596 | * R3/R4 has 64 bit value | |
597 | * R5 has shift count | |
598 | * result in R3/R4 | |
599 | * | |
600 | * ashrdi3: arithmetic right shift (sign propagation) | |
601 | * lshrdi3: logical right shift | |
602 | * ashldi3: left shift | |
603 | */ | |
604 | _GLOBAL(__ashrdi3) | |
605 | subfic r6,r5,32 | |
606 | srw r4,r4,r5 # LSW = count > 31 ? 0 : LSW >> count | |
607 | addi r7,r5,32 # could be xori, or addi with -32 | |
608 | slw r6,r3,r6 # t1 = count > 31 ? 0 : MSW << (32-count) | |
609 | rlwinm r8,r7,0,32 # t3 = (count < 32) ? 32 : 0 | |
610 | sraw r7,r3,r7 # t2 = MSW >> (count-32) | |
611 | or r4,r4,r6 # LSW |= t1 | |
612 | slw r7,r7,r8 # t2 = (count < 32) ? 0 : t2 | |
613 | sraw r3,r3,r5 # MSW = MSW >> count | |
614 | or r4,r4,r7 # LSW |= t2 | |
615 | blr | |
616 | ||
617 | _GLOBAL(__ashldi3) | |
618 | subfic r6,r5,32 | |
619 | slw r3,r3,r5 # MSW = count > 31 ? 0 : MSW << count | |
620 | addi r7,r5,32 # could be xori, or addi with -32 | |
621 | srw r6,r4,r6 # t1 = count > 31 ? 0 : LSW >> (32-count) | |
622 | slw r7,r4,r7 # t2 = count < 32 ? 0 : LSW << (count-32) | |
623 | or r3,r3,r6 # MSW |= t1 | |
624 | slw r4,r4,r5 # LSW = LSW << count | |
625 | or r3,r3,r7 # MSW |= t2 | |
626 | blr | |
627 | ||
628 | _GLOBAL(__lshrdi3) | |
629 | subfic r6,r5,32 | |
630 | srw r4,r4,r5 # LSW = count > 31 ? 0 : LSW >> count | |
631 | addi r7,r5,32 # could be xori, or addi with -32 | |
632 | slw r6,r3,r6 # t1 = count > 31 ? 0 : MSW << (32-count) | |
633 | srw r7,r3,r7 # t2 = count < 32 ? 0 : MSW >> (count-32) | |
634 | or r4,r4,r6 # LSW |= t1 | |
635 | srw r3,r3,r5 # MSW = MSW >> count | |
636 | or r4,r4,r7 # LSW |= t2 | |
637 | blr | |
638 | ||
95ff54f5 PM |
639 | /* |
640 | * 64-bit comparison: __ucmpdi2(u64 a, u64 b) | |
641 | * Returns 0 if a < b, 1 if a == b, 2 if a > b. | |
642 | */ | |
643 | _GLOBAL(__ucmpdi2) | |
644 | cmplw r3,r5 | |
645 | li r3,1 | |
646 | bne 1f | |
647 | cmplw r4,r6 | |
648 | beqlr | |
649 | 1: li r3,0 | |
650 | bltlr | |
651 | li r3,2 | |
652 | blr | |
653 | ||
9994a338 PM |
654 | _GLOBAL(abs) |
655 | srawi r4,r3,31 | |
656 | xor r3,r3,r4 | |
657 | sub r3,r3,r4 | |
658 | blr | |
659 | ||
9994a338 PM |
660 | /* |
661 | * Create a kernel thread | |
662 | * kernel_thread(fn, arg, flags) | |
663 | */ | |
664 | _GLOBAL(kernel_thread) | |
665 | stwu r1,-16(r1) | |
666 | stw r30,8(r1) | |
667 | stw r31,12(r1) | |
668 | mr r30,r3 /* function */ | |
669 | mr r31,r4 /* argument */ | |
670 | ori r3,r5,CLONE_VM /* flags */ | |
671 | oris r3,r3,CLONE_UNTRACED>>16 | |
672 | li r4,0 /* new sp (unused) */ | |
673 | li r0,__NR_clone | |
674 | sc | |
41c2e949 JP |
675 | bns+ 1f /* did system call indicate error? */ |
676 | neg r3,r3 /* if so, make return code negative */ | |
677 | 1: cmpwi 0,r3,0 /* parent or child? */ | |
678 | bne 2f /* return if parent */ | |
9994a338 PM |
679 | li r0,0 /* make top-level stack frame */ |
680 | stwu r0,-16(r1) | |
681 | mtlr r30 /* fn addr in lr */ | |
682 | mr r3,r31 /* load arg and call fn */ | |
683 | PPC440EP_ERR42 | |
684 | blrl | |
685 | li r0,__NR_exit /* exit if function returns */ | |
686 | li r3,0 | |
687 | sc | |
41c2e949 | 688 | 2: lwz r30,8(r1) |
9994a338 PM |
689 | lwz r31,12(r1) |
690 | addi r1,r1,16 | |
691 | blr | |
692 | ||
9994a338 PM |
693 | /* |
694 | * This routine is just here to keep GCC happy - sigh... | |
695 | */ | |
696 | _GLOBAL(__main) | |
697 | blr | |
3d1229d6 ME |
698 | |
699 | #ifdef CONFIG_KEXEC | |
700 | /* | |
701 | * Must be relocatable PIC code callable as a C function. | |
702 | */ | |
703 | .globl relocate_new_kernel | |
704 | relocate_new_kernel: | |
705 | /* r3 = page_list */ | |
706 | /* r4 = reboot_code_buffer */ | |
707 | /* r5 = start_address */ | |
708 | ||
709 | li r0, 0 | |
710 | ||
711 | /* | |
712 | * Set Machine Status Register to a known status, | |
713 | * switch the MMU off and jump to 1: in a single step. | |
714 | */ | |
715 | ||
716 | mr r8, r0 | |
717 | ori r8, r8, MSR_RI|MSR_ME | |
718 | mtspr SPRN_SRR1, r8 | |
719 | addi r8, r4, 1f - relocate_new_kernel | |
720 | mtspr SPRN_SRR0, r8 | |
721 | sync | |
722 | rfi | |
723 | ||
724 | 1: | |
725 | /* from this point address translation is turned off */ | |
726 | /* and interrupts are disabled */ | |
727 | ||
728 | /* set a new stack at the bottom of our page... */ | |
729 | /* (not really needed now) */ | |
d9178f4c | 730 | addi r1, r4, KEXEC_CONTROL_PAGE_SIZE - 8 /* for LR Save+Back Chain */ |
3d1229d6 ME |
731 | stw r0, 0(r1) |
732 | ||
733 | /* Do the copies */ | |
734 | li r6, 0 /* checksum */ | |
735 | mr r0, r3 | |
736 | b 1f | |
737 | ||
738 | 0: /* top, read another word for the indirection page */ | |
739 | lwzu r0, 4(r3) | |
740 | ||
741 | 1: | |
742 | /* is it a destination page? (r8) */ | |
743 | rlwinm. r7, r0, 0, 31, 31 /* IND_DESTINATION (1<<0) */ | |
744 | beq 2f | |
745 | ||
746 | rlwinm r8, r0, 0, 0, 19 /* clear kexec flags, page align */ | |
747 | b 0b | |
748 | ||
749 | 2: /* is it an indirection page? (r3) */ | |
750 | rlwinm. r7, r0, 0, 30, 30 /* IND_INDIRECTION (1<<1) */ | |
751 | beq 2f | |
752 | ||
753 | rlwinm r3, r0, 0, 0, 19 /* clear kexec flags, page align */ | |
754 | subi r3, r3, 4 | |
755 | b 0b | |
756 | ||
757 | 2: /* are we done? */ | |
758 | rlwinm. r7, r0, 0, 29, 29 /* IND_DONE (1<<2) */ | |
759 | beq 2f | |
760 | b 3f | |
761 | ||
762 | 2: /* is it a source page? (r9) */ | |
763 | rlwinm. r7, r0, 0, 28, 28 /* IND_SOURCE (1<<3) */ | |
764 | beq 0b | |
765 | ||
766 | rlwinm r9, r0, 0, 0, 19 /* clear kexec flags, page align */ | |
767 | ||
768 | li r7, PAGE_SIZE / 4 | |
769 | mtctr r7 | |
770 | subi r9, r9, 4 | |
771 | subi r8, r8, 4 | |
772 | 9: | |
773 | lwzu r0, 4(r9) /* do the copy */ | |
774 | xor r6, r6, r0 | |
775 | stwu r0, 4(r8) | |
776 | dcbst 0, r8 | |
777 | sync | |
778 | icbi 0, r8 | |
779 | bdnz 9b | |
780 | ||
781 | addi r9, r9, 4 | |
782 | addi r8, r8, 4 | |
783 | b 0b | |
784 | ||
785 | 3: | |
786 | ||
787 | /* To be certain of avoiding problems with self-modifying code | |
788 | * execute a serializing instruction here. | |
789 | */ | |
790 | isync | |
791 | sync | |
792 | ||
793 | /* jump to the entry point, usually the setup routine */ | |
794 | mtlr r5 | |
795 | blrl | |
796 | ||
797 | 1: b 1b | |
798 | ||
799 | relocate_new_kernel_end: | |
800 | ||
801 | .globl relocate_new_kernel_size | |
802 | relocate_new_kernel_size: | |
803 | .long relocate_new_kernel_end - relocate_new_kernel | |
804 | #endif |