[POWERPC] Export pcibios_remove_pci_devices
[deliverable/linux.git] / arch / powerpc / platforms / embedded6xx / mpc7448_hpc2.c
CommitLineData
c5d56332
ZR
1/*
2 * mpc7448_hpc2.c
3 *
c4342ff9 4 * Board setup routines for the Freescale mpc7448hpc2(taiga) platform
c5d56332
ZR
5 *
6 * Author: Jacob Pan
7 * jacob.pan@freescale.com
8 * Author: Xianghua Xiao
9 * x.xiao@freescale.com
10 * Maintainer: Roy Zang <tie-fei.zang@freescale.com>
11 * Add Flat Device Tree support fot mpc7448hpc2 board
12 *
13 * Copyright 2004-2006 Freescale Semiconductor, Inc.
14 *
c4342ff9
ZR
15 * This program is free software; you can redistribute it and/or
16 * modify it under the terms of the GNU General Public License
17 * as published by the Free Software Foundation; either version
18 * 2 of the License, or (at your option) any later version.
c5d56332
ZR
19 */
20
c5d56332
ZR
21#include <linux/stddef.h>
22#include <linux/kernel.h>
23#include <linux/pci.h>
24#include <linux/kdev_t.h>
25#include <linux/console.h>
26#include <linux/delay.h>
27#include <linux/irq.h>
c5d56332
ZR
28#include <linux/seq_file.h>
29#include <linux/root_dev.h>
30#include <linux/serial.h>
31#include <linux/tty.h>
32#include <linux/serial_core.h>
33
34#include <asm/system.h>
35#include <asm/time.h>
36#include <asm/machdep.h>
37#include <asm/prom.h>
38#include <asm/udbg.h>
39#include <asm/tsi108.h>
40#include <asm/pci-bridge.h>
41#include <asm/reg.h>
42#include <mm/mmu_decl.h>
43#include "mpc7448_hpc2.h"
44#include <asm/tsi108_irq.h>
45#include <asm/mpic.h>
46
47#undef DEBUG
48#ifdef DEBUG
49#define DBG(fmt...) do { printk(fmt); } while(0)
50#else
51#define DBG(fmt...) do { } while(0)
52#endif
53
54#ifndef CONFIG_PCI
55isa_io_base = MPC7448_HPC2_ISA_IO_BASE;
56isa_mem_base = MPC7448_HPC2_ISA_MEM_BASE;
57pci_dram_offset = MPC7448_HPC2_PCI_MEM_OFFSET;
58#endif
59
60extern int tsi108_setup_pci(struct device_node *dev);
61extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
5873c9bd 62extern void tsi108_pci_int_init(struct device_node *node);
35a84c2f 63extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc);
c5d56332
ZR
64
65int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn)
66{
67 if (bus == 0 && PCI_SLOT(devfn) == 0)
68 return PCIBIOS_DEVICE_NOT_FOUND;
69 else
70 return PCIBIOS_SUCCESSFUL;
71}
72
c5d56332
ZR
73static void __init mpc7448_hpc2_setup_arch(void)
74{
c5d56332
ZR
75 struct device_node *np;
76 if (ppc_md.progress)
77 ppc_md.progress("mpc7448_hpc2_setup_arch():set_bridge", 0);
78
c5d56332
ZR
79 tsi108_csr_vir_base = get_vir_csrbase();
80
c5d56332
ZR
81 /* setup PCI host bridge */
82#ifdef CONFIG_PCI
83 for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
84 tsi108_setup_pci(np);
85
86 ppc_md.pci_exclude_device = mpc7448_hpc2_exclude_device;
87 if (ppc_md.progress)
88 ppc_md.progress("tsi108: resources set", 0x100);
89#endif
90
91 printk(KERN_INFO "MPC7448HPC2 (TAIGA) Platform\n");
92 printk(KERN_INFO
93 "Jointly ported by Freescale and Tundra Semiconductor\n");
94 printk(KERN_INFO
95 "Enabling L2 cache then enabling the HID0 prefetch engine.\n");
96}
97
98/*
99 * Interrupt setup and service. Interrrupts on the mpc7448_hpc2 come
100 * from the four external INT pins, PCI interrupts are routed via
101 * PCI interrupt control registers, it generates internal IRQ23
102 *
103 * Interrupt routing on the Taiga Board:
104 * TSI108:PB_INT[0] -> CPU0:INT#
105 * TSI108:PB_INT[1] -> CPU0:MCP#
106 * TSI108:PB_INT[2] -> N/C
107 * TSI108:PB_INT[3] -> N/C
108 */
109static void __init mpc7448_hpc2_init_IRQ(void)
110{
111 struct mpic *mpic;
112 phys_addr_t mpic_paddr = 0;
5873c9bd
ZR
113 struct device_node *tsi_pic;
114#ifdef CONFIG_PCI
c4342ff9
ZR
115 unsigned int cascade_pci_irq;
116 struct device_node *tsi_pci;
5873c9bd
ZR
117 struct device_node *cascade_node = NULL;
118#endif
c5d56332
ZR
119
120 tsi_pic = of_find_node_by_type(NULL, "open-pic");
121 if (tsi_pic) {
122 unsigned int size;
e2eb6392 123 const void *prop = of_get_property(tsi_pic, "reg", &size);
c5d56332
ZR
124 mpic_paddr = of_translate_address(tsi_pic, prop);
125 }
126
127 if (mpic_paddr == 0) {
128 printk("%s: No tsi108 PIC found !\n", __FUNCTION__);
129 return;
130 }
131
5873c9bd 132 DBG("%s: tsi108 pic phys_addr = 0x%x\n", __FUNCTION__,
c5d56332
ZR
133 (u32) mpic_paddr);
134
c4342ff9 135 mpic = mpic_alloc(tsi_pic, mpic_paddr,
c5d56332 136 MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
7233593b 137 MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108,
5873c9bd
ZR
138 24,
139 NR_IRQS-4, /* num_sources used */
c4342ff9 140 "Tsi108_PIC");
c5d56332 141
5873c9bd
ZR
142 BUG_ON(mpic == NULL);
143
144 mpic_assign_isu(mpic, 0, mpic_paddr + 0x100);
145
c5d56332 146 mpic_init(mpic);
c4342ff9 147
5873c9bd 148#ifdef CONFIG_PCI
c4342ff9 149 tsi_pci = of_find_node_by_type(NULL, "pci");
5873c9bd 150 if (tsi_pci == NULL) {
c4342ff9
ZR
151 printk("%s: No tsi108 pci node found !\n", __FUNCTION__);
152 return;
153 }
5873c9bd
ZR
154 cascade_node = of_find_node_by_type(NULL, "pic-router");
155 if (cascade_node == NULL) {
156 printk("%s: No tsi108 pci cascade node found !\n", __FUNCTION__);
157 return;
158 }
c4342ff9
ZR
159
160 cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0);
5873c9bd
ZR
161 DBG("%s: tsi108 cascade_pci_irq = 0x%x\n", __FUNCTION__,
162 (u32) cascade_pci_irq);
163 tsi108_pci_int_init(cascade_node);
c4342ff9
ZR
164 set_irq_data(cascade_pci_irq, mpic);
165 set_irq_chained_handler(cascade_pci_irq, tsi108_irq_cascade);
5873c9bd 166#endif
c5d56332
ZR
167 /* Configure MPIC outputs to CPU0 */
168 tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
c4342ff9 169 of_node_put(tsi_pic);
c5d56332
ZR
170}
171
172void mpc7448_hpc2_show_cpuinfo(struct seq_file *m)
173{
174 seq_printf(m, "vendor\t\t: Freescale Semiconductor\n");
175 seq_printf(m, "machine\t\t: MPC7448hpc2\n");
176}
177
178void mpc7448_hpc2_restart(char *cmd)
179{
180 local_irq_disable();
181
182 /* Set exception prefix high - to the firmware */
183 _nmask_and_or_msr(0, MSR_IP);
184
185 for (;;) ; /* Spin until reset happens */
186}
187
188void mpc7448_hpc2_power_off(void)
189{
190 local_irq_disable();
191 for (;;) ; /* No way to shut power off with software */
192}
193
194void mpc7448_hpc2_halt(void)
195{
196 mpc7448_hpc2_power_off();
197}
198
199/*
200 * Called very early, device-tree isn't unflattened
201 */
202static int __init mpc7448_hpc2_probe(void)
203{
204 unsigned long root = of_get_flat_dt_root();
205
206 if (!of_flat_dt_is_compatible(root, "mpc74xx"))
207 return 0;
208 return 1;
209}
210
211static int mpc7448_machine_check_exception(struct pt_regs *regs)
212{
213 extern void tsi108_clear_pci_cfg_error(void);
214 const struct exception_table_entry *entry;
215
216 /* Are we prepared to handle this fault */
217 if ((entry = search_exception_tables(regs->nip)) != NULL) {
218 tsi108_clear_pci_cfg_error();
219 regs->msr |= MSR_RI;
220 regs->nip = entry->fixup;
221 return 1;
222 }
223 return 0;
c5d56332 224}
c4342ff9 225
c5d56332
ZR
226define_machine(mpc7448_hpc2){
227 .name = "MPC7448 HPC2",
228 .probe = mpc7448_hpc2_probe,
229 .setup_arch = mpc7448_hpc2_setup_arch,
230 .init_IRQ = mpc7448_hpc2_init_IRQ,
231 .show_cpuinfo = mpc7448_hpc2_show_cpuinfo,
232 .get_irq = mpic_get_irq,
c5d56332
ZR
233 .restart = mpc7448_hpc2_restart,
234 .calibrate_decr = generic_calibrate_decr,
235 .machine_check_exception= mpc7448_machine_check_exception,
236 .progress = udbg_progress,
237};
This page took 0.130134 seconds and 5 git commands to generate.