Commit | Line | Data |
---|---|---|
3acb2344 | 1 | /* |
3acb2344 LN |
2 | * Board setup routines for the Marvell EV-64360-BP Evaluation Board. |
3 | * | |
4 | * Author: Lee Nicks <allinux@gmail.com> | |
5 | * | |
6 | * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il | |
7 | * Based on code done by - Mark A. Greer <mgreer@mvista.com> | |
8 | * | |
9 | * This program is free software; you can redistribute it and/or modify it | |
10 | * under the terms of the GNU General Public License as published by the | |
11 | * Free Software Foundation; either version 2 of the License, or (at your | |
12 | * option) any later version. | |
13 | */ | |
3acb2344 LN |
14 | #include <linux/kernel.h> |
15 | #include <linux/pci.h> | |
16 | #include <linux/kdev_t.h> | |
17 | #include <linux/console.h> | |
18 | #include <linux/initrd.h> | |
19 | #include <linux/root_dev.h> | |
20 | #include <linux/delay.h> | |
21 | #include <linux/seq_file.h> | |
22 | #include <linux/bootmem.h> | |
23 | #include <linux/mtd/physmap.h> | |
24 | #include <linux/mv643xx.h> | |
d052d1be | 25 | #include <linux/platform_device.h> |
3acb2344 LN |
26 | #ifdef CONFIG_BOOTIMG |
27 | #include <linux/bootimg.h> | |
28 | #endif | |
29 | #include <asm/page.h> | |
30 | #include <asm/time.h> | |
31 | #include <asm/smp.h> | |
32 | #include <asm/todc.h> | |
33 | #include <asm/bootinfo.h> | |
34 | #include <asm/ppcboot.h> | |
35 | #include <asm/mv64x60.h> | |
fd582ec8 | 36 | #include <asm/machdep.h> |
3acb2344 LN |
37 | #include <platforms/ev64360.h> |
38 | ||
39 | #define BOARD_VENDOR "Marvell" | |
40 | #define BOARD_MACHINE "EV-64360-BP" | |
41 | ||
42 | static struct mv64x60_handle bh; | |
43 | static void __iomem *sram_base; | |
44 | ||
45 | static u32 ev64360_flash_size_0; | |
46 | static u32 ev64360_flash_size_1; | |
47 | ||
48 | static u32 ev64360_bus_frequency; | |
49 | ||
50 | unsigned char __res[sizeof(bd_t)]; | |
51 | ||
2104da90 LN |
52 | TODC_ALLOC(); |
53 | ||
3acb2344 LN |
54 | static int __init |
55 | ev64360_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) | |
56 | { | |
57 | return 0; | |
58 | } | |
59 | ||
60 | static void __init | |
61 | ev64360_setup_bridge(void) | |
62 | { | |
63 | struct mv64x60_setup_info si; | |
64 | int i; | |
65 | ||
66 | memset(&si, 0, sizeof(si)); | |
67 | ||
68 | si.phys_reg_base = CONFIG_MV64X60_NEW_BASE; | |
69 | ||
70 | #ifdef CONFIG_PCI | |
71 | si.pci_1.enable_bus = 1; | |
72 | si.pci_1.pci_io.cpu_base = EV64360_PCI1_IO_START_PROC_ADDR; | |
73 | si.pci_1.pci_io.pci_base_hi = 0; | |
74 | si.pci_1.pci_io.pci_base_lo = EV64360_PCI1_IO_START_PCI_ADDR; | |
75 | si.pci_1.pci_io.size = EV64360_PCI1_IO_SIZE; | |
76 | si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE; | |
77 | si.pci_1.pci_mem[0].cpu_base = EV64360_PCI1_MEM_START_PROC_ADDR; | |
78 | si.pci_1.pci_mem[0].pci_base_hi = EV64360_PCI1_MEM_START_PCI_HI_ADDR; | |
79 | si.pci_1.pci_mem[0].pci_base_lo = EV64360_PCI1_MEM_START_PCI_LO_ADDR; | |
80 | si.pci_1.pci_mem[0].size = EV64360_PCI1_MEM_SIZE; | |
81 | si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE; | |
82 | si.pci_1.pci_cmd_bits = 0; | |
83 | si.pci_1.latency_timer = 0x80; | |
84 | #else | |
85 | si.pci_0.enable_bus = 0; | |
86 | si.pci_1.enable_bus = 0; | |
87 | #endif | |
88 | ||
89 | for (i = 0; i < MV64x60_CPU2MEM_WINDOWS; i++) { | |
90 | #if defined(CONFIG_NOT_COHERENT_CACHE) | |
91 | si.cpu_prot_options[i] = 0; | |
92 | si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE; | |
93 | si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE; | |
94 | si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE; | |
95 | ||
96 | si.pci_1.acc_cntl_options[i] = | |
97 | MV64360_PCI_ACC_CNTL_SNOOP_NONE | | |
98 | MV64360_PCI_ACC_CNTL_SWAP_NONE | | |
99 | MV64360_PCI_ACC_CNTL_MBURST_128_BYTES | | |
100 | MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES; | |
101 | #else | |
102 | si.cpu_prot_options[i] = 0; | |
103 | si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE; /* errata */ | |
104 | si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE; /* errata */ | |
105 | si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE; /* errata */ | |
106 | ||
107 | si.pci_1.acc_cntl_options[i] = | |
108 | MV64360_PCI_ACC_CNTL_SNOOP_WB | | |
109 | MV64360_PCI_ACC_CNTL_SWAP_NONE | | |
110 | MV64360_PCI_ACC_CNTL_MBURST_32_BYTES | | |
111 | MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES; | |
112 | #endif | |
113 | } | |
114 | ||
115 | if (mv64x60_init(&bh, &si)) | |
116 | printk(KERN_WARNING "Bridge initialization failed.\n"); | |
117 | ||
118 | #ifdef CONFIG_PCI | |
119 | pci_dram_offset = 0; /* sys mem at same addr on PCI & cpu bus */ | |
120 | ppc_md.pci_swizzle = common_swizzle; | |
121 | ppc_md.pci_map_irq = ev64360_map_irq; | |
122 | ppc_md.pci_exclude_device = mv64x60_pci_exclude_device; | |
123 | ||
124 | mv64x60_set_bus(&bh, 1, 0); | |
125 | bh.hose_b->first_busno = 0; | |
126 | bh.hose_b->last_busno = 0xff; | |
127 | #endif | |
128 | } | |
129 | ||
130 | /* Bridge & platform setup routines */ | |
131 | void __init | |
132 | ev64360_intr_setup(void) | |
133 | { | |
134 | /* MPP 8, 9, and 10 */ | |
135 | mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_1, 0xfff); | |
136 | ||
137 | /* | |
138 | * Define GPP 8,9,and 10 interrupt polarity as active low | |
139 | * input signal and level triggered | |
140 | */ | |
141 | mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, 0x700); | |
142 | mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, 0x700); | |
143 | ||
144 | /* Config GPP intr ctlr to respond to level trigger */ | |
145 | mv64x60_set_bits(&bh, MV64x60_COMM_ARBITER_CNTL, (1<<10)); | |
146 | ||
147 | /* Erranum FEr PCI-#8 */ | |
148 | mv64x60_clr_bits(&bh, MV64x60_PCI0_CMD, (1<<5) | (1<<9)); | |
149 | mv64x60_clr_bits(&bh, MV64x60_PCI1_CMD, (1<<5) | (1<<9)); | |
150 | ||
151 | /* | |
152 | * Dismiss and then enable interrupt on GPP interrupt cause | |
153 | * for CPU #0 | |
154 | */ | |
155 | mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~0x700); | |
156 | mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, 0x700); | |
157 | ||
158 | /* | |
159 | * Dismiss and then enable interrupt on CPU #0 high cause reg | |
160 | * BIT25 summarizes GPP interrupts 8-15 | |
161 | */ | |
162 | mv64x60_set_bits(&bh, MV64360_IC_CPU0_INTR_MASK_HI, (1<<25)); | |
163 | } | |
164 | ||
165 | void __init | |
166 | ev64360_setup_peripherals(void) | |
167 | { | |
168 | u32 base; | |
169 | ||
170 | /* Set up window for boot CS */ | |
171 | mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN, | |
172 | EV64360_BOOT_WINDOW_BASE, EV64360_BOOT_WINDOW_SIZE, 0); | |
173 | bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN); | |
174 | ||
175 | /* We only use the 32-bit flash */ | |
176 | mv64x60_get_32bit_window(&bh, MV64x60_CPU2BOOT_WIN, &base, | |
177 | &ev64360_flash_size_0); | |
178 | ev64360_flash_size_1 = 0; | |
179 | ||
180 | mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN, | |
181 | EV64360_RTC_WINDOW_BASE, EV64360_RTC_WINDOW_SIZE, 0); | |
182 | bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN); | |
183 | ||
2104da90 LN |
184 | TODC_INIT(TODC_TYPE_DS1501, 0, 0, |
185 | ioremap(EV64360_RTC_WINDOW_BASE, EV64360_RTC_WINDOW_SIZE), 8); | |
186 | ||
3acb2344 LN |
187 | mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN, |
188 | EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0); | |
189 | bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN); | |
190 | sram_base = ioremap(EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE); | |
191 | ||
192 | /* Set up Enet->SRAM window */ | |
193 | mv64x60_set_32bit_window(&bh, MV64x60_ENET2MEM_4_WIN, | |
194 | EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0x2); | |
195 | bh.ci->enable_window_32bit(&bh, MV64x60_ENET2MEM_4_WIN); | |
196 | ||
197 | /* Give enet r/w access to memory region */ | |
198 | mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_0, (0x3 << (4 << 1))); | |
199 | mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_1, (0x3 << (4 << 1))); | |
200 | mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_2, (0x3 << (4 << 1))); | |
201 | ||
202 | mv64x60_clr_bits(&bh, MV64x60_PCI1_PCI_DECODE_CNTL, (1 << 3)); | |
203 | mv64x60_clr_bits(&bh, MV64x60_TIMR_CNTR_0_3_CNTL, | |
204 | ((1 << 0) | (1 << 8) | (1 << 16) | (1 << 24))); | |
205 | ||
206 | #if defined(CONFIG_NOT_COHERENT_CACHE) | |
207 | mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x00160000); | |
208 | #else | |
209 | mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x001600b2); | |
210 | #endif | |
211 | ||
212 | /* | |
213 | * Setting the SRAM to 0. Note that this generates parity errors on | |
214 | * internal data path in SRAM since it's first time accessing it | |
215 | * while after reset it's not configured. | |
216 | */ | |
217 | memset(sram_base, 0, MV64360_SRAM_SIZE); | |
218 | ||
219 | /* set up PCI interrupt controller */ | |
220 | ev64360_intr_setup(); | |
221 | } | |
222 | ||
223 | static void __init | |
224 | ev64360_setup_arch(void) | |
225 | { | |
226 | if (ppc_md.progress) | |
227 | ppc_md.progress("ev64360_setup_arch: enter", 0); | |
228 | ||
229 | set_tb(0, 0); | |
230 | ||
231 | #ifdef CONFIG_BLK_DEV_INITRD | |
232 | if (initrd_start) | |
233 | ROOT_DEV = Root_RAM0; | |
234 | else | |
235 | #endif | |
236 | #ifdef CONFIG_ROOT_NFS | |
237 | ROOT_DEV = Root_NFS; | |
238 | #else | |
239 | ROOT_DEV = Root_SDA2; | |
240 | #endif | |
241 | ||
242 | /* | |
243 | * Set up the L2CR register. | |
244 | */ | |
245 | _set_L2CR(L2CR_L2E | L2CR_L2PE); | |
246 | ||
247 | if (ppc_md.progress) | |
248 | ppc_md.progress("ev64360_setup_arch: calling setup_bridge", 0); | |
249 | ||
250 | ev64360_setup_bridge(); | |
251 | ev64360_setup_peripherals(); | |
252 | ev64360_bus_frequency = ev64360_bus_freq(); | |
253 | ||
254 | printk(KERN_INFO "%s %s port (C) 2005 Lee Nicks " | |
255 | "(allinux@gmail.com)\n", BOARD_VENDOR, BOARD_MACHINE); | |
256 | if (ppc_md.progress) | |
257 | ppc_md.progress("ev64360_setup_arch: exit", 0); | |
258 | } | |
259 | ||
260 | /* Platform device data fixup routines. */ | |
261 | #if defined(CONFIG_SERIAL_MPSC) | |
262 | static void __init | |
263 | ev64360_fixup_mpsc_pdata(struct platform_device *pdev) | |
264 | { | |
265 | struct mpsc_pdata *pdata; | |
266 | ||
267 | pdata = (struct mpsc_pdata *)pdev->dev.platform_data; | |
268 | ||
269 | pdata->max_idle = 40; | |
270 | pdata->default_baud = EV64360_DEFAULT_BAUD; | |
271 | pdata->brg_clk_src = EV64360_MPSC_CLK_SRC; | |
272 | /* | |
273 | * TCLK (not SysCLk) is routed to BRG, then to the MPSC. On most parts, | |
274 | * TCLK == SysCLK but on 64460, they are separate pins. | |
275 | * SysCLK can go up to 200 MHz but TCLK can only go up to 133 MHz. | |
276 | */ | |
277 | pdata->brg_clk_freq = min(ev64360_bus_frequency, MV64x60_TCLK_FREQ_MAX); | |
278 | } | |
279 | #endif | |
280 | ||
281 | #if defined(CONFIG_MV643XX_ETH) | |
282 | static void __init | |
283 | ev64360_fixup_eth_pdata(struct platform_device *pdev) | |
284 | { | |
285 | struct mv643xx_eth_platform_data *eth_pd; | |
286 | static u16 phy_addr[] = { | |
287 | EV64360_ETH0_PHY_ADDR, | |
288 | EV64360_ETH1_PHY_ADDR, | |
289 | EV64360_ETH2_PHY_ADDR, | |
290 | }; | |
291 | ||
292 | eth_pd = pdev->dev.platform_data; | |
293 | eth_pd->force_phy_addr = 1; | |
294 | eth_pd->phy_addr = phy_addr[pdev->id]; | |
295 | eth_pd->tx_queue_size = EV64360_ETH_TX_QUEUE_SIZE; | |
296 | eth_pd->rx_queue_size = EV64360_ETH_RX_QUEUE_SIZE; | |
297 | } | |
298 | #endif | |
299 | ||
bbbe1212 | 300 | static int |
3acb2344 LN |
301 | ev64360_platform_notify(struct device *dev) |
302 | { | |
303 | static struct { | |
304 | char *bus_id; | |
305 | void ((*rtn)(struct platform_device *pdev)); | |
306 | } dev_map[] = { | |
307 | #if defined(CONFIG_SERIAL_MPSC) | |
308 | { MPSC_CTLR_NAME ".0", ev64360_fixup_mpsc_pdata }, | |
309 | { MPSC_CTLR_NAME ".1", ev64360_fixup_mpsc_pdata }, | |
310 | #endif | |
311 | #if defined(CONFIG_MV643XX_ETH) | |
312 | { MV643XX_ETH_NAME ".0", ev64360_fixup_eth_pdata }, | |
313 | { MV643XX_ETH_NAME ".1", ev64360_fixup_eth_pdata }, | |
314 | { MV643XX_ETH_NAME ".2", ev64360_fixup_eth_pdata }, | |
315 | #endif | |
316 | }; | |
317 | struct platform_device *pdev; | |
318 | int i; | |
319 | ||
320 | if (dev && dev->bus_id) | |
321 | for (i=0; i<ARRAY_SIZE(dev_map); i++) | |
322 | if (!strncmp(dev->bus_id, dev_map[i].bus_id, | |
323 | BUS_ID_SIZE)) { | |
324 | ||
325 | pdev = container_of(dev, | |
326 | struct platform_device, dev); | |
327 | dev_map[i].rtn(pdev); | |
328 | } | |
329 | ||
330 | return 0; | |
331 | } | |
332 | ||
333 | #ifdef CONFIG_MTD_PHYSMAP | |
334 | ||
335 | #ifndef MB | |
336 | #define MB (1 << 20) | |
337 | #endif | |
338 | ||
339 | /* | |
340 | * MTD Layout. | |
341 | * | |
342 | * FLASH Amount: 0xff000000 - 0xffffffff | |
343 | * ------------- ----------------------- | |
344 | * Reserved: 0xff000000 - 0xff03ffff | |
345 | * JFFS2 file system: 0xff040000 - 0xffefffff | |
346 | * U-boot: 0xfff00000 - 0xffffffff | |
347 | */ | |
348 | static int __init | |
349 | ev64360_setup_mtd(void) | |
350 | { | |
351 | u32 size; | |
352 | int ptbl_entries; | |
353 | static struct mtd_partition *ptbl; | |
354 | ||
355 | size = ev64360_flash_size_0 + ev64360_flash_size_1; | |
356 | if (!size) | |
357 | return -ENOMEM; | |
358 | ||
359 | ptbl_entries = 3; | |
360 | ||
95b93a0c | 361 | if ((ptbl = kzalloc(ptbl_entries * sizeof(struct mtd_partition), |
3acb2344 LN |
362 | GFP_KERNEL)) == NULL) { |
363 | ||
364 | printk(KERN_WARNING "Can't alloc MTD partition table\n"); | |
365 | return -ENOMEM; | |
366 | } | |
3acb2344 LN |
367 | |
368 | ptbl[0].name = "reserved"; | |
369 | ptbl[0].offset = 0; | |
370 | ptbl[0].size = EV64360_MTD_RESERVED_SIZE; | |
371 | ptbl[1].name = "jffs2"; | |
372 | ptbl[1].offset = EV64360_MTD_RESERVED_SIZE; | |
373 | ptbl[1].size = EV64360_MTD_JFFS2_SIZE; | |
374 | ptbl[2].name = "U-BOOT"; | |
375 | ptbl[2].offset = EV64360_MTD_RESERVED_SIZE + EV64360_MTD_JFFS2_SIZE; | |
376 | ptbl[2].size = EV64360_MTD_UBOOT_SIZE; | |
377 | ||
378 | physmap_map.size = size; | |
379 | physmap_set_partitions(ptbl, ptbl_entries); | |
380 | return 0; | |
381 | } | |
382 | ||
383 | arch_initcall(ev64360_setup_mtd); | |
384 | #endif | |
385 | ||
386 | static void | |
387 | ev64360_restart(char *cmd) | |
388 | { | |
389 | ulong i = 0xffffffff; | |
390 | volatile unsigned char * rtc_base = ioremap(EV64360_RTC_WINDOW_BASE,0x4000); | |
391 | ||
392 | /* issue hard reset */ | |
393 | rtc_base[0xf] = 0x80; | |
394 | rtc_base[0xc] = 0x00; | |
395 | rtc_base[0xd] = 0x01; | |
396 | rtc_base[0xf] = 0x83; | |
397 | ||
398 | while (i-- > 0) ; | |
399 | panic("restart failed\n"); | |
400 | } | |
401 | ||
402 | static void | |
403 | ev64360_halt(void) | |
404 | { | |
405 | while (1) ; | |
406 | /* NOTREACHED */ | |
407 | } | |
408 | ||
409 | static void | |
410 | ev64360_power_off(void) | |
411 | { | |
412 | ev64360_halt(); | |
413 | /* NOTREACHED */ | |
414 | } | |
415 | ||
416 | static int | |
417 | ev64360_show_cpuinfo(struct seq_file *m) | |
418 | { | |
419 | seq_printf(m, "vendor\t\t: " BOARD_VENDOR "\n"); | |
420 | seq_printf(m, "machine\t\t: " BOARD_MACHINE "\n"); | |
421 | seq_printf(m, "bus speed\t: %dMHz\n", ev64360_bus_frequency/1000/1000); | |
422 | ||
423 | return 0; | |
424 | } | |
425 | ||
426 | static void __init | |
427 | ev64360_calibrate_decr(void) | |
428 | { | |
429 | u32 freq; | |
430 | ||
431 | freq = ev64360_bus_frequency / 4; | |
432 | ||
433 | printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n", | |
434 | (long)freq / 1000000, (long)freq % 1000000); | |
435 | ||
436 | tb_ticks_per_jiffy = freq / HZ; | |
437 | tb_to_us = mulhwu_scale_factor(freq, 1000000); | |
438 | } | |
439 | ||
440 | unsigned long __init | |
441 | ev64360_find_end_of_memory(void) | |
442 | { | |
443 | return mv64x60_get_mem_size(CONFIG_MV64X60_NEW_BASE, | |
444 | MV64x60_TYPE_MV64360); | |
445 | } | |
446 | ||
447 | static inline void | |
448 | ev64360_set_bat(void) | |
449 | { | |
450 | mb(); | |
451 | mtspr(SPRN_DBAT2U, 0xf0001ffe); | |
452 | mtspr(SPRN_DBAT2L, 0xf000002a); | |
453 | mb(); | |
454 | } | |
455 | ||
456 | #if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE) | |
457 | static void __init | |
458 | ev64360_map_io(void) | |
459 | { | |
460 | io_block_mapping(CONFIG_MV64X60_NEW_BASE, \ | |
461 | CONFIG_MV64X60_NEW_BASE, \ | |
462 | 0x00020000, _PAGE_IO); | |
463 | } | |
464 | #endif | |
465 | ||
466 | void __init | |
467 | platform_init(unsigned long r3, unsigned long r4, unsigned long r5, | |
468 | unsigned long r6, unsigned long r7) | |
469 | { | |
470 | parse_bootinfo(find_bootinfo()); | |
471 | ||
472 | /* ASSUMPTION: If both r3 (bd_t pointer) and r6 (cmdline pointer) | |
473 | * are non-zero, then we should use the board info from the bd_t | |
474 | * structure and the cmdline pointed to by r6 instead of the | |
475 | * information from birecs, if any. Otherwise, use the information | |
a8de5ce9 | 476 | * from birecs as discovered by the preceding call to |
3acb2344 LN |
477 | * parse_bootinfo(). This rule should work with both PPCBoot, which |
478 | * uses a bd_t board info structure, and the kernel boot wrapper, | |
479 | * which uses birecs. | |
480 | */ | |
481 | if (r3 && r6) { | |
482 | /* copy board info structure */ | |
483 | memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) ); | |
484 | /* copy command line */ | |
485 | *(char *)(r7+KERNELBASE) = 0; | |
486 | strcpy(cmd_line, (char *)(r6+KERNELBASE)); | |
487 | } | |
488 | #ifdef CONFIG_ISA | |
489 | isa_mem_base = 0; | |
490 | #endif | |
491 | ||
492 | ppc_md.setup_arch = ev64360_setup_arch; | |
493 | ppc_md.show_cpuinfo = ev64360_show_cpuinfo; | |
494 | ppc_md.init_IRQ = mv64360_init_irq; | |
495 | ppc_md.get_irq = mv64360_get_irq; | |
496 | ppc_md.restart = ev64360_restart; | |
497 | ppc_md.power_off = ev64360_power_off; | |
498 | ppc_md.halt = ev64360_halt; | |
499 | ppc_md.find_end_of_memory = ev64360_find_end_of_memory; | |
2104da90 LN |
500 | ppc_md.init = NULL; |
501 | ||
502 | ppc_md.time_init = todc_time_init; | |
503 | ppc_md.set_rtc_time = todc_set_rtc_time; | |
504 | ppc_md.get_rtc_time = todc_get_rtc_time; | |
505 | ppc_md.nvram_read_val = todc_direct_read_val; | |
506 | ppc_md.nvram_write_val = todc_direct_write_val; | |
3acb2344 LN |
507 | ppc_md.calibrate_decr = ev64360_calibrate_decr; |
508 | ||
509 | #if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE) | |
510 | ppc_md.setup_io_mappings = ev64360_map_io; | |
511 | ppc_md.progress = mv64x60_mpsc_progress; | |
512 | mv64x60_progress_init(CONFIG_MV64X60_NEW_BASE); | |
513 | #endif | |
514 | ||
515 | #if defined(CONFIG_SERIAL_MPSC) || defined(CONFIG_MV643XX_ETH) | |
516 | platform_notify = ev64360_platform_notify; | |
517 | #endif | |
518 | ||
519 | ev64360_set_bat(); /* Need for ev64360_find_end_of_memory and progress */ | |
520 | } |