[deliverable/linux.git] / arch / sh / boards / mach-kfr2r09 / setup.c

/*
 * KFR2R09 board support code
 *
 * Copyright (C) 2009 Magnus Damm
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 */
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/onenand.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
#include <linux/i2c.h>
#include <linux/usb/r8a66597.h>
#include <media/rj54n1cb0c.h>
#include <media/soc_camera.h>
#include <media/sh_mobile_ceu.h>
#include <video/sh_mobile_lcdc.h>
#include <asm/suspend.h>
#include <asm/clock.h>
#include <asm/machvec.h>
#include <asm/io.h>
#include <cpu/sh7724.h>
#include <mach/kfr2r09.h>

static struct mtd_partition kfr2r09_nor_flash_partitions[] =
{
	{
		.name = "boot",
		.offset = 0,
		.size = (4 * 1024 * 1024),
		.mask_flags = MTD_WRITEABLE,	/* Read-only */
	},
	{
		.name = "other",
		.offset = MTDPART_OFS_APPEND,
		.size = MTDPART_SIZ_FULL,
	},
};

static struct physmap_flash_data kfr2r09_nor_flash_data = {
	.width		= 2,
	.parts		= kfr2r09_nor_flash_partitions,
	.nr_parts	= ARRAY_SIZE(kfr2r09_nor_flash_partitions),
};

static struct resource kfr2r09_nor_flash_resources[] = {
	[0] = {
		.name		= "NOR Flash",
		.start		= 0x00000000,
		.end		= 0x03ffffff,
		.flags		= IORESOURCE_MEM,
	}
};

static struct platform_device kfr2r09_nor_flash_device = {
	.name		= "physmap-flash",
	.resource	= kfr2r09_nor_flash_resources,
	.num_resources	= ARRAY_SIZE(kfr2r09_nor_flash_resources),
	.dev		= {
		.platform_data = &kfr2r09_nor_flash_data,
	},
};

static struct resource kfr2r09_nand_flash_resources[] = {
	[0] = {
		.name		= "NAND Flash",
		.start		= 0x10000000,
		.end		= 0x1001ffff,
		.flags		= IORESOURCE_MEM,
	}
};

static struct platform_device kfr2r09_nand_flash_device = {
	.name		= "onenand-flash",
	.resource	= kfr2r09_nand_flash_resources,
	.num_resources	= ARRAY_SIZE(kfr2r09_nand_flash_resources),
};

static struct sh_keysc_info kfr2r09_sh_keysc_info = {
	.mode = SH_KEYSC_MODE_1, /* KEYOUT0->4, KEYIN0->4 */
	.scan_timing = 3,
	.delay = 10,
	.keycodes = {
		KEY_PHONE, KEY_CLEAR, KEY_MAIL, KEY_WWW, KEY_ENTER,
		KEY_1, KEY_2, KEY_3, 0, KEY_UP,
		KEY_4, KEY_5, KEY_6, 0, KEY_LEFT,
		KEY_7, KEY_8, KEY_9, KEY_PROG1, KEY_RIGHT,
		KEY_S, KEY_0, KEY_P, KEY_PROG2, KEY_DOWN,
		0, 0, 0, 0, 0
	},
};

static struct resource kfr2r09_sh_keysc_resources[] = {
	[0] = {
		.name	= "KEYSC",
		.start  = 0x044b0000,
		.end    = 0x044b000f,
		.flags  = IORESOURCE_MEM,
	},
	[1] = {
		.start  = 79,
		.flags  = IORESOURCE_IRQ,
	},
};

static struct platform_device kfr2r09_sh_keysc_device = {
	.name           = "sh_keysc",
	.id             = 0, /* "keysc0" clock */
	.num_resources  = ARRAY_SIZE(kfr2r09_sh_keysc_resources),
	.resource       = kfr2r09_sh_keysc_resources,
	.dev	= {
		.platform_data	= &kfr2r09_sh_keysc_info,
	},
	.archdata = {
		.hwblk_id = HWBLK_KEYSC,
	},
};

static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
	.clock_source = LCDC_CLK_BUS,
	.ch[0] = {
		.chan = LCDC_CHAN_MAINLCD,
		.bpp = 16,
		.interface_type = SYS18,
		.clock_divider = 6,
		.flags = LCDC_FLAGS_DWPOL,
		.lcd_cfg = {
			.name = "TX07D34VM0AAA",
			.xres = 240,
			.yres = 400,
			.left_margin = 0,
			.right_margin = 16,
			.hsync_len = 8,
			.upper_margin = 0,
			.lower_margin = 1,
			.vsync_len = 1,
			.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
		},
		.lcd_size_cfg = {
			.width = 35,
			.height = 58,
		},
		.board_cfg = {
			.setup_sys = kfr2r09_lcd_setup,
			.start_transfer = kfr2r09_lcd_start,
			.display_on = kfr2r09_lcd_on,
			.display_off = kfr2r09_lcd_off,
		},
		.sys_bus_cfg = {
			.ldmt2r = 0x07010904,
			.ldmt3r = 0x14012914,
			/* set 1s delay to encourage fsync() */
			.deferred_io_msec = 1000,
		},
	}
};

static struct resource kfr2r09_sh_lcdc_resources[] = {
	[0] = {
		.name	= "LCDC",
		.start	= 0xfe940000, /* P4-only space */
		.end	= 0xfe942fff,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.start	= 106,
		.flags	= IORESOURCE_IRQ,
	},
};

static struct platform_device kfr2r09_sh_lcdc_device = {
	.name		= "sh_mobile_lcdc_fb",
	.num_resources	= ARRAY_SIZE(kfr2r09_sh_lcdc_resources),
	.resource	= kfr2r09_sh_lcdc_resources,
	.dev	= {
		.platform_data	= &kfr2r09_sh_lcdc_info,
	},
	.archdata = {
		.hwblk_id = HWBLK_LCDC,
	},
};

static struct r8a66597_platdata kfr2r09_usb0_gadget_data = {
	.on_chip = 1,
};

static struct resource kfr2r09_usb0_gadget_resources[] = {
	[0] = {
		.start	= 0x04d80000,
		.end	= 0x04d80123,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.start	= 65,
		.end	= 65,
		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
	},
};

static struct platform_device kfr2r09_usb0_gadget_device = {
	.name		= "r8a66597_udc",
	.id		= 0,
	.dev = {
		.dma_mask		= NULL,         /*  not use dma */
		.coherent_dma_mask	= 0xffffffff,
		.platform_data	= &kfr2r09_usb0_gadget_data,
	},
	.num_resources	= ARRAY_SIZE(kfr2r09_usb0_gadget_resources),
	.resource	= kfr2r09_usb0_gadget_resources,
};

static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
};

static struct resource kfr2r09_ceu_resources[] = {
	[0] = {
		.name	= "CEU",
		.start	= 0xfe910000,
		.end	= 0xfe91009f,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.start  = 52,
		.end  = 52,
		.flags  = IORESOURCE_IRQ,
	},
	[2] = {
		/* place holder for contiguous memory */
	},
};

static struct platform_device kfr2r09_ceu_device = {
	.name		= "sh_mobile_ceu",
	.id             = 0, /* "ceu0" clock */
	.num_resources	= ARRAY_SIZE(kfr2r09_ceu_resources),
	.resource	= kfr2r09_ceu_resources,
	.dev	= {
		.platform_data	= &sh_mobile_ceu_info,
	},
	.archdata = {
		.hwblk_id = HWBLK_CEU0,
	},
};

static struct i2c_board_info kfr2r09_i2c_camera = {
	I2C_BOARD_INFO("rj54n1cb0c", 0x50),
};

static struct clk *camera_clk;

/* set VIO_CKO clock to 25MHz */
#define CEU_MCLK_FREQ 25000000

#define DRVCRB 0xA405018C
static int camera_power(struct device *dev, int mode)
{
	int ret;

	if (mode) {
		long rate;

		camera_clk = clk_get(NULL, "video_clk");
		if (IS_ERR(camera_clk))
			return PTR_ERR(camera_clk);

		rate = clk_round_rate(camera_clk, CEU_MCLK_FREQ);
		ret = clk_set_rate(camera_clk, rate);
		if (ret < 0)
			goto eclkrate;

		/* set DRVCRB
		 *
		 * use 1.8 V for VccQ_VIO
		 * use 2.85V for VccQ_SR
		 */
		__raw_writew((__raw_readw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB);

		/* reset clear */
		ret = gpio_request(GPIO_PTB4, NULL);
		if (ret < 0)
			goto eptb4;
		ret = gpio_request(GPIO_PTB7, NULL);
		if (ret < 0)
			goto eptb7;

		ret = gpio_direction_output(GPIO_PTB4, 1);
		if (!ret)
			ret = gpio_direction_output(GPIO_PTB7, 1);
		if (ret < 0)
			goto egpioout;
		msleep(1);

		ret = clk_enable(camera_clk);	/* start VIO_CKO */
		if (ret < 0)
			goto eclkon;

		return 0;
	}

	ret = 0;

	clk_disable(camera_clk);
eclkon:
	gpio_set_value(GPIO_PTB7, 0);
egpioout:
	gpio_set_value(GPIO_PTB4, 0);
	gpio_free(GPIO_PTB7);
eptb7:
	gpio_free(GPIO_PTB4);
eptb4:
eclkrate:
	clk_put(camera_clk);
	return ret;
}

static struct rj54n1_pdata rj54n1_priv = {
	.mclk_freq	= CEU_MCLK_FREQ,
	.ioctl_high	= false,
};

static struct soc_camera_link rj54n1_link = {
	.power		= camera_power,
	.board_info	= &kfr2r09_i2c_camera,
	.i2c_adapter_id	= 1,
	.module_name	= "rj54n1cb0c",
	.priv		= &rj54n1_priv,
};

static struct platform_device kfr2r09_camera = {
	.name	= "soc-camera-pdrv",
	.id	= 0,
	.dev	= {
		.platform_data = &rj54n1_link,
	},
};

static struct resource kfr2r09_sh_sdhi0_resources[] = {
	[0] = {
		.name	= "SDHI0",
		.start  = 0x04ce0000,
		.end    = 0x04ce01ff,
		.flags  = IORESOURCE_MEM,
	},
	[1] = {
		.start  = 101,
		.flags  = IORESOURCE_IRQ,
	},
};

static struct platform_device kfr2r09_sh_sdhi0_device = {
	.name           = "sh_mobile_sdhi",
	.num_resources  = ARRAY_SIZE(kfr2r09_sh_sdhi0_resources),
	.resource       = kfr2r09_sh_sdhi0_resources,
	.archdata = {
		.hwblk_id = HWBLK_SDHI0,
	},
};

static struct platform_device *kfr2r09_devices[] __initdata = {
	&kfr2r09_nor_flash_device,
	&kfr2r09_nand_flash_device,
	&kfr2r09_sh_keysc_device,
	&kfr2r09_sh_lcdc_device,
	&kfr2r09_ceu_device,
	&kfr2r09_camera,
	&kfr2r09_sh_sdhi0_device,
};

#define BSC_CS0BCR 0xfec10004
#define BSC_CS0WCR 0xfec10024
#define BSC_CS4BCR 0xfec10010
#define BSC_CS4WCR 0xfec10030
#define PORT_MSELCRB 0xa4050182

#ifdef CONFIG_I2C
static int kfr2r09_usb0_gadget_i2c_setup(void)
{
	struct i2c_adapter *a;
	struct i2c_msg msg;
	unsigned char buf[2];
	int ret;

	a = i2c_get_adapter(0);
	if (!a)
		return -ENODEV;

	/* set bit 1 (the second bit) of chip at 0x09, register 0x13 */
	buf[0] = 0x13;
	msg.addr = 0x09;
	msg.buf = buf;
	msg.len = 1;
	msg.flags = 0;
	ret = i2c_transfer(a, &msg, 1);
	if (ret != 1)
		return -ENODEV;

	buf[0] = 0;
	msg.addr = 0x09;
	msg.buf = buf;
	msg.len = 1;
	msg.flags = I2C_M_RD;
	ret = i2c_transfer(a, &msg, 1);
	if (ret != 1)
		return -ENODEV;

	buf[1] = buf[0] | (1 << 1);
	buf[0] = 0x13;
	msg.addr = 0x09;
	msg.buf = buf;
	msg.len = 2;
	msg.flags = 0;
	ret = i2c_transfer(a, &msg, 1);
	if (ret != 1)
		return -ENODEV;

	return 0;
}

static int kfr2r09_serial_i2c_setup(void)
{
	struct i2c_adapter *a;
	struct i2c_msg msg;
	unsigned char buf[2];
	int ret;

	a = i2c_get_adapter(0);
	if (!a)
		return -ENODEV;

	/* set bit 6 (the 7th bit) of chip at 0x09, register 0x13 */
	buf[0] = 0x13;
	msg.addr = 0x09;
	msg.buf = buf;
	msg.len = 1;
	msg.flags = 0;
	ret = i2c_transfer(a, &msg, 1);
	if (ret != 1)
		return -ENODEV;

	buf[0] = 0;
	msg.addr = 0x09;
	msg.buf = buf;
	msg.len = 1;
	msg.flags = I2C_M_RD;
	ret = i2c_transfer(a, &msg, 1);
	if (ret != 1)
		return -ENODEV;

	buf[1] = buf[0] | (1 << 6);
	buf[0] = 0x13;
	msg.addr = 0x09;
	msg.buf = buf;
	msg.len = 2;
	msg.flags = 0;
	ret = i2c_transfer(a, &msg, 1);
	if (ret != 1)
		return -ENODEV;

	return 0;
}
#else
static int kfr2r09_usb0_gadget_i2c_setup(void)
{
	return -ENODEV;
}

static int kfr2r09_serial_i2c_setup(void)
{
	return -ENODEV;
}
#endif

static int kfr2r09_usb0_gadget_setup(void)
{
	int plugged_in;

	gpio_request(GPIO_PTN4, NULL); /* USB_DET */
	gpio_direction_input(GPIO_PTN4);
	plugged_in = gpio_get_value(GPIO_PTN4);
	if (!plugged_in)
		return -ENODEV; /* no cable plugged in */

	if (kfr2r09_usb0_gadget_i2c_setup() != 0)
		return -ENODEV; /* unable to configure using i2c */

	__raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
	gpio_request(GPIO_FN_PDSTATUS, NULL); /* R-standby disables USB clock */
	gpio_request(GPIO_PTV6, NULL); /* USBCLK_ON */
	gpio_direction_output(GPIO_PTV6, 1); /* USBCLK_ON = H */
	msleep(20); /* wait 20ms to let the clock settle */
	clk_enable(clk_get(NULL, "usb0"));
	__raw_writew(0x0600, 0xa40501d4);

	return 0;
}

extern char kfr2r09_sdram_enter_start;
extern char kfr2r09_sdram_enter_end;
extern char kfr2r09_sdram_leave_start;
extern char kfr2r09_sdram_leave_end;

static int __init kfr2r09_devices_setup(void)
{
	/* register board specific self-refresh code */
	sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
					SUSP_SH_RSTANDBY,
					&kfr2r09_sdram_enter_start,
					&kfr2r09_sdram_enter_end,
					&kfr2r09_sdram_leave_start,
					&kfr2r09_sdram_leave_end);

	/* enable SCIF1 serial port for YC401 console support */
	gpio_request(GPIO_FN_SCIF1_RXD, NULL);
	gpio_request(GPIO_FN_SCIF1_TXD, NULL);
	kfr2r09_serial_i2c_setup(); /* ECONTMSK(bit6=L10ONEN) set 1 */
	gpio_request(GPIO_PTG3, NULL); /* HPON_ON */
	gpio_direction_output(GPIO_PTG3, 1); /* HPON_ON = H */

	/* setup NOR flash at CS0 */
	__raw_writel(0x36db0400, BSC_CS0BCR);
	__raw_writel(0x00000500, BSC_CS0WCR);

	/* setup NAND flash at CS4 */
	__raw_writel(0x36db0400, BSC_CS4BCR);
	__raw_writel(0x00000500, BSC_CS4WCR);

	/* setup KEYSC pins */
	gpio_request(GPIO_FN_KEYOUT0, NULL);
	gpio_request(GPIO_FN_KEYOUT1, NULL);
	gpio_request(GPIO_FN_KEYOUT2, NULL);
	gpio_request(GPIO_FN_KEYOUT3, NULL);
	gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
	gpio_request(GPIO_FN_KEYIN0, NULL);
	gpio_request(GPIO_FN_KEYIN1, NULL);
	gpio_request(GPIO_FN_KEYIN2, NULL);
	gpio_request(GPIO_FN_KEYIN3, NULL);
	gpio_request(GPIO_FN_KEYIN4, NULL);
	gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);

	/* setup LCDC pins for SYS panel */
	gpio_request(GPIO_FN_LCDD17, NULL);
	gpio_request(GPIO_FN_LCDD16, NULL);
	gpio_request(GPIO_FN_LCDD15, NULL);
	gpio_request(GPIO_FN_LCDD14, NULL);
	gpio_request(GPIO_FN_LCDD13, NULL);
	gpio_request(GPIO_FN_LCDD12, NULL);
	gpio_request(GPIO_FN_LCDD11, NULL);
	gpio_request(GPIO_FN_LCDD10, NULL);
	gpio_request(GPIO_FN_LCDD9, NULL);
	gpio_request(GPIO_FN_LCDD8, NULL);
	gpio_request(GPIO_FN_LCDD7, NULL);
	gpio_request(GPIO_FN_LCDD6, NULL);
	gpio_request(GPIO_FN_LCDD5, NULL);
	gpio_request(GPIO_FN_LCDD4, NULL);
	gpio_request(GPIO_FN_LCDD3, NULL);
	gpio_request(GPIO_FN_LCDD2, NULL);
	gpio_request(GPIO_FN_LCDD1, NULL);
	gpio_request(GPIO_FN_LCDD0, NULL);
	gpio_request(GPIO_FN_LCDRS, NULL); /* LCD_RS */
	gpio_request(GPIO_FN_LCDCS, NULL); /* LCD_CS/ */
	gpio_request(GPIO_FN_LCDRD, NULL); /* LCD_RD/ */
	gpio_request(GPIO_FN_LCDWR, NULL); /* LCD_WR/ */
	gpio_request(GPIO_FN_LCDVSYN, NULL); /* LCD_VSYNC */
	gpio_request(GPIO_PTE4, NULL); /* LCD_RST/ */
	gpio_direction_output(GPIO_PTE4, 1);
	gpio_request(GPIO_PTF4, NULL); /* PROTECT/ */
	gpio_direction_output(GPIO_PTF4, 1);
	gpio_request(GPIO_PTU0, NULL); /* LEDSTDBY/ */
	gpio_direction_output(GPIO_PTU0, 1);

	/* setup USB function */
	if (kfr2r09_usb0_gadget_setup() == 0)
		platform_device_register(&kfr2r09_usb0_gadget_device);

	/* CEU */
	gpio_request(GPIO_FN_VIO_CKO, NULL);
	gpio_request(GPIO_FN_VIO0_CLK, NULL);
	gpio_request(GPIO_FN_VIO0_VD, NULL);
	gpio_request(GPIO_FN_VIO0_HD, NULL);
	gpio_request(GPIO_FN_VIO0_FLD, NULL);
	gpio_request(GPIO_FN_VIO0_D7, NULL);
	gpio_request(GPIO_FN_VIO0_D6, NULL);
	gpio_request(GPIO_FN_VIO0_D5, NULL);
	gpio_request(GPIO_FN_VIO0_D4, NULL);
	gpio_request(GPIO_FN_VIO0_D3, NULL);
	gpio_request(GPIO_FN_VIO0_D2, NULL);
	gpio_request(GPIO_FN_VIO0_D1, NULL);
	gpio_request(GPIO_FN_VIO0_D0, NULL);

	platform_resource_setup_memory(&kfr2r09_ceu_device, "ceu", 4 << 20);

	/* SDHI0 connected to yc304 */
	gpio_request(GPIO_FN_SDHI0CD, NULL);
	gpio_request(GPIO_FN_SDHI0D3, NULL);
	gpio_request(GPIO_FN_SDHI0D2, NULL);
	gpio_request(GPIO_FN_SDHI0D1, NULL);
	gpio_request(GPIO_FN_SDHI0D0, NULL);
	gpio_request(GPIO_FN_SDHI0CMD, NULL);
	gpio_request(GPIO_FN_SDHI0CLK, NULL);

	return platform_add_devices(kfr2r09_devices,
				    ARRAY_SIZE(kfr2r09_devices));
}
device_initcall(kfr2r09_devices_setup);

/* Return the board specific boot mode pin configuration */
static int kfr2r09_mode_pins(void)
{
	/* MD0=1, MD1=1, MD2=0: Clock Mode 3
	 * MD3=0: 16-bit Area0 Bus Width
	 * MD5=1: Little Endian
	 * MD8=1: Test Mode Disabled
	 */
	return MODE_PIN0 | MODE_PIN1 | MODE_PIN5 | MODE_PIN8;
}

/*
 * The Machine Vector
 */
static struct sh_machine_vector mv_kfr2r09 __initmv = {
	.mv_name		= "kfr2r09",
	.mv_mode_pins		= kfr2r09_mode_pins,
};
Commit	Line	Data
e7d16514 MD	1	/*
	2	* KFR2R09 board support code
	3	*
	4	* Copyright (C) 2009 Magnus Damm
	5	*
	6	* This file is subject to the terms and conditions of the GNU General Public
	7	* License. See the file "COPYING" in the main directory of this archive
	8	* for more details.
	9	*/
	10	#include <linux/init.h>
	11	#include <linux/platform_device.h>
	12	#include <linux/interrupt.h>
a366aa64	13	#include <linux/mtd/physmap.h>
33893d7a	14	#include <linux/mtd/onenand.h>
e7d16514 MD	15	#include <linux/delay.h>
	16	#include <linux/clk.h>
	17	#include <linux/gpio.h>
39a6bf14	18	#include <linux/input.h>
fc1d003d	19	#include <linux/input/sh_keysc.h>
5a1c4cb5 MD	20	#include <linux/i2c.h>
5a1c4cb5 MD	21	#include <linux/usb/r8a66597.h>
a6b5f200	22	#include <media/rj54n1cb0c.h>
a469f627 GL	23	#include <media/soc_camera.h>
a469f627 GL	24	#include <media/sh_mobile_ceu.h>
9f26e659	25	#include <video/sh_mobile_lcdc.h>
67e522d0	26	#include <asm/suspend.h>
e7d16514 MD	27	#include <asm/clock.h>
	28	#include <asm/machvec.h>
	29	#include <asm/io.h>
	30	#include <cpu/sh7724.h>
9f26e659	31	#include <mach/kfr2r09.h>
e7d16514	32
a366aa64 MD	33	static struct mtd_partition kfr2r09_nor_flash_partitions[] =
	34	{
	35	{
	36	.name = "boot",
	37	.offset = 0,
	38	.size = (4 * 1024 * 1024),
	39	.mask_flags = MTD_WRITEABLE, /* Read-only */
	40	},
	41	{
	42	.name = "other",
	43	.offset = MTDPART_OFS_APPEND,
	44	.size = MTDPART_SIZ_FULL,
	45	},
	46	};
	47
	48	static struct physmap_flash_data kfr2r09_nor_flash_data = {
	49	.width = 2,
	50	.parts = kfr2r09_nor_flash_partitions,
	51	.nr_parts = ARRAY_SIZE(kfr2r09_nor_flash_partitions),
	52	};
	53
	54	static struct resource kfr2r09_nor_flash_resources[] = {
	55	[0] = {
	56	.name = "NOR Flash",
	57	.start = 0x00000000,
	58	.end = 0x03ffffff,
	59	.flags = IORESOURCE_MEM,
	60	}
	61	};
	62
	63	static struct platform_device kfr2r09_nor_flash_device = {
	64	.name = "physmap-flash",
	65	.resource = kfr2r09_nor_flash_resources,
	66	.num_resources = ARRAY_SIZE(kfr2r09_nor_flash_resources),
	67	.dev = {
	68	.platform_data = &kfr2r09_nor_flash_data,
	69	},
	70	};
	71
33893d7a MD	72	static struct resource kfr2r09_nand_flash_resources[] = {
	73	[0] = {
	74	.name = "NAND Flash",
	75	.start = 0x10000000,
	76	.end = 0x1001ffff,
	77	.flags = IORESOURCE_MEM,
	78	}
	79	};
	80
	81	static struct platform_device kfr2r09_nand_flash_device = {
	82	.name = "onenand-flash",
	83	.resource = kfr2r09_nand_flash_resources,
	84	.num_resources = ARRAY_SIZE(kfr2r09_nand_flash_resources),
	85	};
	86
39a6bf14 MD	87	static struct sh_keysc_info kfr2r09_sh_keysc_info = {
	88	.mode = SH_KEYSC_MODE_1, /* KEYOUT0->4, KEYIN0->4 */
	89	.scan_timing = 3,
	90	.delay = 10,
	91	.keycodes = {
	92	KEY_PHONE, KEY_CLEAR, KEY_MAIL, KEY_WWW, KEY_ENTER,
	93	KEY_1, KEY_2, KEY_3, 0, KEY_UP,
	94	KEY_4, KEY_5, KEY_6, 0, KEY_LEFT,
	95	KEY_7, KEY_8, KEY_9, KEY_PROG1, KEY_RIGHT,
	96	KEY_S, KEY_0, KEY_P, KEY_PROG2, KEY_DOWN,
	97	0, 0, 0, 0, 0
	98	},
	99	};
	100
	101	static struct resource kfr2r09_sh_keysc_resources[] = {
	102	[0] = {
	103	.name = "KEYSC",
	104	.start = 0x044b0000,
	105	.end = 0x044b000f,
	106	.flags = IORESOURCE_MEM,
	107	},
	108	[1] = {
	109	.start = 79,
	110	.flags = IORESOURCE_IRQ,
	111	},
	112	};
	113
	114	static struct platform_device kfr2r09_sh_keysc_device = {
	115	.name = "sh_keysc",
	116	.id = 0, /* "keysc0" clock */
	117	.num_resources = ARRAY_SIZE(kfr2r09_sh_keysc_resources),
	118	.resource = kfr2r09_sh_keysc_resources,
	119	.dev = {
	120	.platform_data = &kfr2r09_sh_keysc_info,
	121	},
442c3753 MD	122	.archdata = {
	123	.hwblk_id = HWBLK_KEYSC,
	124	},
39a6bf14 MD	125	};
39a6bf14 MD	126
9f26e659 MD	127	static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
	128	.clock_source = LCDC_CLK_BUS,
	129	.ch[0] = {
	130	.chan = LCDC_CHAN_MAINLCD,
	131	.bpp = 16,
	132	.interface_type = SYS18,
	133	.clock_divider = 6,
	134	.flags = LCDC_FLAGS_DWPOL,
	135	.lcd_cfg = {
	136	.name = "TX07D34VM0AAA",
	137	.xres = 240,
	138	.yres = 400,
	139	.left_margin = 0,
	140	.right_margin = 16,
	141	.hsync_len = 8,
	142	.upper_margin = 0,
	143	.lower_margin = 1,
	144	.vsync_len = 1,
	145	.sync = FB_SYNC_HOR_HIGH_ACT \| FB_SYNC_VERT_HIGH_ACT,
	146	},
	147	.lcd_size_cfg = {
	148	.width = 35,
	149	.height = 58,
	150	},
	151	.board_cfg = {
	152	.setup_sys = kfr2r09_lcd_setup,
657bf0bd	153	.start_transfer = kfr2r09_lcd_start,
9f26e659 MD	154	.display_on = kfr2r09_lcd_on,
	155	.display_off = kfr2r09_lcd_off,
	156	},
	157	.sys_bus_cfg = {
	158	.ldmt2r = 0x07010904,
	159	.ldmt3r = 0x14012914,
	160	/* set 1s delay to encourage fsync() */
	161	.deferred_io_msec = 1000,
	162	},
	163	}
	164	};
	165
	166	static struct resource kfr2r09_sh_lcdc_resources[] = {
	167	[0] = {
	168	.name = "LCDC",
	169	.start = 0xfe940000, /* P4-only space */
a6f15ade	170	.end = 0xfe942fff,
9f26e659 MD	171	.flags = IORESOURCE_MEM,
	172	},
	173	[1] = {
	174	.start = 106,
	175	.flags = IORESOURCE_IRQ,
	176	},
	177	};
	178
	179	static struct platform_device kfr2r09_sh_lcdc_device = {
	180	.name = "sh_mobile_lcdc_fb",
	181	.num_resources = ARRAY_SIZE(kfr2r09_sh_lcdc_resources),
	182	.resource = kfr2r09_sh_lcdc_resources,
	183	.dev = {
	184	.platform_data = &kfr2r09_sh_lcdc_info,
	185	},
963e04ca MD	186	.archdata = {
	187	.hwblk_id = HWBLK_LCDC,
	188	},
9f26e659 MD	189	};
9f26e659 MD	190
5a1c4cb5 MD	191	static struct r8a66597_platdata kfr2r09_usb0_gadget_data = {
	192	.on_chip = 1,
	193	};
	194
	195	static struct resource kfr2r09_usb0_gadget_resources[] = {
	196	[0] = {
	197	.start = 0x04d80000,
	198	.end = 0x04d80123,
	199	.flags = IORESOURCE_MEM,
	200	},
	201	[1] = {
	202	.start = 65,
	203	.end = 65,
	204	.flags = IORESOURCE_IRQ \| IRQF_TRIGGER_LOW,
	205	},
	206	};
	207
	208	static struct platform_device kfr2r09_usb0_gadget_device = {
	209	.name = "r8a66597_udc",
	210	.id = 0,
	211	.dev = {
	212	.dma_mask = NULL, /* not use dma */
	213	.coherent_dma_mask = 0xffffffff,
	214	.platform_data = &kfr2r09_usb0_gadget_data,
	215	},
	216	.num_resources = ARRAY_SIZE(kfr2r09_usb0_gadget_resources),
	217	.resource = kfr2r09_usb0_gadget_resources,
	218	};
	219
a469f627 GL	220	static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
	221	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
	222	};
	223
	224	static struct resource kfr2r09_ceu_resources[] = {
	225	[0] = {
	226	.name = "CEU",
	227	.start = 0xfe910000,
	228	.end = 0xfe91009f,
	229	.flags = IORESOURCE_MEM,
	230	},
	231	[1] = {
	232	.start = 52,
	233	.end = 52,
	234	.flags = IORESOURCE_IRQ,
	235	},
	236	[2] = {
	237	/* place holder for contiguous memory */
	238	},
	239	};
	240
	241	static struct platform_device kfr2r09_ceu_device = {
	242	.name = "sh_mobile_ceu",
	243	.id = 0, /* "ceu0" clock */
	244	.num_resources = ARRAY_SIZE(kfr2r09_ceu_resources),
	245	.resource = kfr2r09_ceu_resources,
	246	.dev = {
	247	.platform_data = &sh_mobile_ceu_info,
	248	},
	249	.archdata = {
	250	.hwblk_id = HWBLK_CEU0,
	251	},
	252	};
	253
	254	static struct i2c_board_info kfr2r09_i2c_camera = {
	255	I2C_BOARD_INFO("rj54n1cb0c", 0x50),
	256	};
	257
	258	static struct clk *camera_clk;
	259
a6b5f200 GL	260	/* set VIO_CKO clock to 25MHz */
	261	#define CEU_MCLK_FREQ 25000000
	262
a469f627 GL	263	#define DRVCRB 0xA405018C
	264	static int camera_power(struct device *dev, int mode)
	265	{
	266	int ret;
	267
	268	if (mode) {
	269	long rate;
	270
	271	camera_clk = clk_get(NULL, "video_clk");
	272	if (IS_ERR(camera_clk))
	273	return PTR_ERR(camera_clk);
	274
a6b5f200	275	rate = clk_round_rate(camera_clk, CEU_MCLK_FREQ);
a469f627 GL	276	ret = clk_set_rate(camera_clk, rate);
	277	if (ret < 0)
	278	goto eclkrate;
	279
	280	/* set DRVCRB
	281	*
	282	* use 1.8 V for VccQ_VIO
	283	* use 2.85V for VccQ_SR
	284	*/
9d56dd3b	285	__raw_writew((__raw_readw(DRVCRB) & ~0x0003) \| 0x0001, DRVCRB);
a469f627 GL	286
	287	/* reset clear */
	288	ret = gpio_request(GPIO_PTB4, NULL);
	289	if (ret < 0)
	290	goto eptb4;
	291	ret = gpio_request(GPIO_PTB7, NULL);
	292	if (ret < 0)
	293	goto eptb7;
	294
	295	ret = gpio_direction_output(GPIO_PTB4, 1);
	296	if (!ret)
	297	ret = gpio_direction_output(GPIO_PTB7, 1);
	298	if (ret < 0)
	299	goto egpioout;
	300	msleep(1);
	301
	302	ret = clk_enable(camera_clk); /* start VIO_CKO */
	303	if (ret < 0)
	304	goto eclkon;
	305
	306	return 0;
	307	}
	308
	309	ret = 0;
	310
	311	clk_disable(camera_clk);
	312	eclkon:
	313	gpio_set_value(GPIO_PTB7, 0);
	314	egpioout:
	315	gpio_set_value(GPIO_PTB4, 0);
	316	gpio_free(GPIO_PTB7);
	317	eptb7:
	318	gpio_free(GPIO_PTB4);
	319	eptb4:
	320	eclkrate:
	321	clk_put(camera_clk);
	322	return ret;
	323	}
	324
a6b5f200 GL	325	static struct rj54n1_pdata rj54n1_priv = {
	326	.mclk_freq = CEU_MCLK_FREQ,
	327	.ioctl_high = false,
	328	};
	329
a469f627 GL	330	static struct soc_camera_link rj54n1_link = {
	331	.power = camera_power,
	332	.board_info = &kfr2r09_i2c_camera,
	333	.i2c_adapter_id = 1,
	334	.module_name = "rj54n1cb0c",
a6b5f200	335	.priv = &rj54n1_priv,
a469f627 GL	336	};
	337
	338	static struct platform_device kfr2r09_camera = {
	339	.name = "soc-camera-pdrv",
	340	.id = 0,
	341	.dev = {
	342	.platform_data = &rj54n1_link,
	343	},
	344	};
	345
d2a2fb97 MD	346	static struct resource kfr2r09_sh_sdhi0_resources[] = {
	347	[0] = {
	348	.name = "SDHI0",
	349	.start = 0x04ce0000,
	350	.end = 0x04ce01ff,
	351	.flags = IORESOURCE_MEM,
	352	},
	353	[1] = {
	354	.start = 101,
	355	.flags = IORESOURCE_IRQ,
	356	},
	357	};
	358
	359	static struct platform_device kfr2r09_sh_sdhi0_device = {
	360	.name = "sh_mobile_sdhi",
	361	.num_resources = ARRAY_SIZE(kfr2r09_sh_sdhi0_resources),
	362	.resource = kfr2r09_sh_sdhi0_resources,
	363	.archdata = {
	364	.hwblk_id = HWBLK_SDHI0,
	365	},
	366	};
	367
a366aa64 MD	368	static struct platform_device *kfr2r09_devices[] __initdata = {
a366aa64 MD	369	&kfr2r09_nor_flash_device,
33893d7a	370	&kfr2r09_nand_flash_device,
39a6bf14	371	&kfr2r09_sh_keysc_device,
9f26e659	372	&kfr2r09_sh_lcdc_device,
a469f627 GL	373	&kfr2r09_ceu_device,
a469f627 GL	374	&kfr2r09_camera,
d2a2fb97	375	&kfr2r09_sh_sdhi0_device,
a366aa64 MD	376	};
	377
	378	#define BSC_CS0BCR 0xfec10004
	379	#define BSC_CS0WCR 0xfec10024
33893d7a MD	380	#define BSC_CS4BCR 0xfec10010
33893d7a MD	381	#define BSC_CS4WCR 0xfec10030
5a1c4cb5 MD	382	#define PORT_MSELCRB 0xa4050182
5a1c4cb5 MD	383
045a4b7e	384	#ifdef CONFIG_I2C
5a1c4cb5 MD	385	static int kfr2r09_usb0_gadget_i2c_setup(void)
	386	{
	387	struct i2c_adapter *a;
	388	struct i2c_msg msg;
	389	unsigned char buf[2];
	390	int ret;
	391
	392	a = i2c_get_adapter(0);
	393	if (!a)
	394	return -ENODEV;
	395
	396	/* set bit 1 (the second bit) of chip at 0x09, register 0x13 */
	397	buf[0] = 0x13;
	398	msg.addr = 0x09;
	399	msg.buf = buf;
	400	msg.len = 1;
	401	msg.flags = 0;
	402	ret = i2c_transfer(a, &msg, 1);
	403	if (ret != 1)
	404	return -ENODEV;
	405
	406	buf[0] = 0;
	407	msg.addr = 0x09;
	408	msg.buf = buf;
	409	msg.len = 1;
	410	msg.flags = I2C_M_RD;
	411	ret = i2c_transfer(a, &msg, 1);
	412	if (ret != 1)
	413	return -ENODEV;
	414
	415	buf[1] = buf[0] \| (1 << 1);
	416	buf[0] = 0x13;
	417	msg.addr = 0x09;
	418	msg.buf = buf;
	419	msg.len = 2;
	420	msg.flags = 0;
	421	ret = i2c_transfer(a, &msg, 1);
	422	if (ret != 1)
	423	return -ENODEV;
	424
	425	return 0;
	426	}
e6d8460a MD	427
	428	static int kfr2r09_serial_i2c_setup(void)
	429	{
	430	struct i2c_adapter *a;
	431	struct i2c_msg msg;
	432	unsigned char buf[2];
	433	int ret;
	434
	435	a = i2c_get_adapter(0);
	436	if (!a)
	437	return -ENODEV;
	438
	439	/* set bit 6 (the 7th bit) of chip at 0x09, register 0x13 */
	440	buf[0] = 0x13;
	441	msg.addr = 0x09;
	442	msg.buf = buf;
	443	msg.len = 1;
	444	msg.flags = 0;
	445	ret = i2c_transfer(a, &msg, 1);
	446	if (ret != 1)
	447	return -ENODEV;
	448
	449	buf[0] = 0;
	450	msg.addr = 0x09;
	451	msg.buf = buf;
	452	msg.len = 1;
	453	msg.flags = I2C_M_RD;
	454	ret = i2c_transfer(a, &msg, 1);
	455	if (ret != 1)
	456	return -ENODEV;
	457
	458	buf[1] = buf[0] \| (1 << 6);
	459	buf[0] = 0x13;
	460	msg.addr = 0x09;
	461	msg.buf = buf;
	462	msg.len = 2;
	463	msg.flags = 0;
	464	ret = i2c_transfer(a, &msg, 1);
	465	if (ret != 1)
	466	return -ENODEV;
	467
	468	return 0;
	469	}
045a4b7e MD	470	#else
	471	static int kfr2r09_usb0_gadget_i2c_setup(void)
	472	{
	473	return -ENODEV;
	474	}
e6d8460a MD	475
	476	static int kfr2r09_serial_i2c_setup(void)
	477	{
	478	return -ENODEV;
	479	}
045a4b7e	480	#endif
5a1c4cb5 MD	481
	482	static int kfr2r09_usb0_gadget_setup(void)
	483	{
	484	int plugged_in;
	485
	486	gpio_request(GPIO_PTN4, NULL); /* USB_DET */
	487	gpio_direction_input(GPIO_PTN4);
	488	plugged_in = gpio_get_value(GPIO_PTN4);
	489	if (!plugged_in)
	490	return -ENODEV; /* no cable plugged in */
	491
	492	if (kfr2r09_usb0_gadget_i2c_setup() != 0)
	493	return -ENODEV; /* unable to configure using i2c */
	494
9d56dd3b	495	__raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) \| 0x8000, PORT_MSELCRB);
5a1c4cb5 MD	496	gpio_request(GPIO_FN_PDSTATUS, NULL); /* R-standby disables USB clock */
	497	gpio_request(GPIO_PTV6, NULL); /* USBCLK_ON */
	498	gpio_direction_output(GPIO_PTV6, 1); /* USBCLK_ON = H */
	499	msleep(20); /* wait 20ms to let the clock settle */
	500	clk_enable(clk_get(NULL, "usb0"));
9d56dd3b	501	__raw_writew(0x0600, 0xa40501d4);
5a1c4cb5 MD	502
	503	return 0;
	504	}
a366aa64	505
67e522d0 MD	506	extern char kfr2r09_sdram_enter_start;
	507	extern char kfr2r09_sdram_enter_end;
	508	extern char kfr2r09_sdram_leave_start;
	509	extern char kfr2r09_sdram_leave_end;
	510
e7d16514 MD	511	static int __init kfr2r09_devices_setup(void)
e7d16514 MD	512	{
67e522d0	513	/* register board specific self-refresh code */
58ee987e MD	514	sh_mobile_register_self_refresh(SUSP_SH_STANDBY \| SUSP_SH_SF \|
58ee987e MD	515	SUSP_SH_RSTANDBY,
67e522d0 MD	516	&kfr2r09_sdram_enter_start,
	517	&kfr2r09_sdram_enter_end,
	518	&kfr2r09_sdram_leave_start,
	519	&kfr2r09_sdram_leave_end);
	520
e7d16514 MD	521	/* enable SCIF1 serial port for YC401 console support */
	522	gpio_request(GPIO_FN_SCIF1_RXD, NULL);
	523	gpio_request(GPIO_FN_SCIF1_TXD, NULL);
e6d8460a MD	524	kfr2r09_serial_i2c_setup(); /* ECONTMSK(bit6=L10ONEN) set 1 */
	525	gpio_request(GPIO_PTG3, NULL); /* HPON_ON */
	526	gpio_direction_output(GPIO_PTG3, 1); /* HPON_ON = H */
e7d16514	527
a366aa64	528	/* setup NOR flash at CS0 */
9d56dd3b PM	529	__raw_writel(0x36db0400, BSC_CS0BCR);
9d56dd3b PM	530	__raw_writel(0x00000500, BSC_CS0WCR);
a366aa64	531
33893d7a	532	/* setup NAND flash at CS4 */
9d56dd3b PM	533	__raw_writel(0x36db0400, BSC_CS4BCR);
9d56dd3b PM	534	__raw_writel(0x00000500, BSC_CS4WCR);
33893d7a	535
39a6bf14 MD	536	/* setup KEYSC pins */
	537	gpio_request(GPIO_FN_KEYOUT0, NULL);
	538	gpio_request(GPIO_FN_KEYOUT1, NULL);
	539	gpio_request(GPIO_FN_KEYOUT2, NULL);
	540	gpio_request(GPIO_FN_KEYOUT3, NULL);
	541	gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
	542	gpio_request(GPIO_FN_KEYIN0, NULL);
	543	gpio_request(GPIO_FN_KEYIN1, NULL);
	544	gpio_request(GPIO_FN_KEYIN2, NULL);
	545	gpio_request(GPIO_FN_KEYIN3, NULL);
	546	gpio_request(GPIO_FN_KEYIN4, NULL);
	547	gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
	548
9f26e659 MD	549	/* setup LCDC pins for SYS panel */
	550	gpio_request(GPIO_FN_LCDD17, NULL);
	551	gpio_request(GPIO_FN_LCDD16, NULL);
	552	gpio_request(GPIO_FN_LCDD15, NULL);
	553	gpio_request(GPIO_FN_LCDD14, NULL);
	554	gpio_request(GPIO_FN_LCDD13, NULL);
	555	gpio_request(GPIO_FN_LCDD12, NULL);
	556	gpio_request(GPIO_FN_LCDD11, NULL);
	557	gpio_request(GPIO_FN_LCDD10, NULL);
	558	gpio_request(GPIO_FN_LCDD9, NULL);
	559	gpio_request(GPIO_FN_LCDD8, NULL);
	560	gpio_request(GPIO_FN_LCDD7, NULL);
	561	gpio_request(GPIO_FN_LCDD6, NULL);
	562	gpio_request(GPIO_FN_LCDD5, NULL);
	563	gpio_request(GPIO_FN_LCDD4, NULL);
	564	gpio_request(GPIO_FN_LCDD3, NULL);
	565	gpio_request(GPIO_FN_LCDD2, NULL);
	566	gpio_request(GPIO_FN_LCDD1, NULL);
	567	gpio_request(GPIO_FN_LCDD0, NULL);
	568	gpio_request(GPIO_FN_LCDRS, NULL); /* LCD_RS */
	569	gpio_request(GPIO_FN_LCDCS, NULL); /* LCD_CS/ */
	570	gpio_request(GPIO_FN_LCDRD, NULL); /* LCD_RD/ */
	571	gpio_request(GPIO_FN_LCDWR, NULL); /* LCD_WR/ */
	572	gpio_request(GPIO_FN_LCDVSYN, NULL); /* LCD_VSYNC */
	573	gpio_request(GPIO_PTE4, NULL); /* LCD_RST/ */
	574	gpio_direction_output(GPIO_PTE4, 1);
	575	gpio_request(GPIO_PTF4, NULL); /* PROTECT/ */
	576	gpio_direction_output(GPIO_PTF4, 1);
	577	gpio_request(GPIO_PTU0, NULL); /* LEDSTDBY/ */
	578	gpio_direction_output(GPIO_PTU0, 1);
	579
5a1c4cb5 MD	580	/* setup USB function */
	581	if (kfr2r09_usb0_gadget_setup() == 0)
	582	platform_device_register(&kfr2r09_usb0_gadget_device);
	583
a469f627 GL	584	/* CEU */
	585	gpio_request(GPIO_FN_VIO_CKO, NULL);
	586	gpio_request(GPIO_FN_VIO0_CLK, NULL);
	587	gpio_request(GPIO_FN_VIO0_VD, NULL);
	588	gpio_request(GPIO_FN_VIO0_HD, NULL);
	589	gpio_request(GPIO_FN_VIO0_FLD, NULL);
	590	gpio_request(GPIO_FN_VIO0_D7, NULL);
	591	gpio_request(GPIO_FN_VIO0_D6, NULL);
	592	gpio_request(GPIO_FN_VIO0_D5, NULL);
	593	gpio_request(GPIO_FN_VIO0_D4, NULL);
	594	gpio_request(GPIO_FN_VIO0_D3, NULL);
	595	gpio_request(GPIO_FN_VIO0_D2, NULL);
	596	gpio_request(GPIO_FN_VIO0_D1, NULL);
	597	gpio_request(GPIO_FN_VIO0_D0, NULL);
	598
	599	platform_resource_setup_memory(&kfr2r09_ceu_device, "ceu", 4 << 20);
	600
d2a2fb97 MD	601	/* SDHI0 connected to yc304 */
d2a2fb97 MD	602	gpio_request(GPIO_FN_SDHI0CD, NULL);
d2a2fb97 MD	603	gpio_request(GPIO_FN_SDHI0D3, NULL);
	604	gpio_request(GPIO_FN_SDHI0D2, NULL);
	605	gpio_request(GPIO_FN_SDHI0D1, NULL);
	606	gpio_request(GPIO_FN_SDHI0D0, NULL);
	607	gpio_request(GPIO_FN_SDHI0CMD, NULL);
	608	gpio_request(GPIO_FN_SDHI0CLK, NULL);
	609
a366aa64 MD	610	return platform_add_devices(kfr2r09_devices,
a366aa64 MD	611	ARRAY_SIZE(kfr2r09_devices));
e7d16514 MD	612	}
	613	device_initcall(kfr2r09_devices_setup);
	614
	615	/* Return the board specific boot mode pin configuration */
	616	static int kfr2r09_mode_pins(void)
	617	{
	618	/* MD0=1, MD1=1, MD2=0: Clock Mode 3
	619	* MD3=0: 16-bit Area0 Bus Width
	620	* MD5=1: Little Endian
	621	* MD8=1: Test Mode Disabled
	622	*/
	623	return MODE_PIN0 \| MODE_PIN1 \| MODE_PIN5 \| MODE_PIN8;
	624	}
	625
	626	/*
	627	* The Machine Vector
	628	*/
	629	static struct sh_machine_vector mv_kfr2r09 __initmv = {
	630	.mv_name = "kfr2r09",
	631	.mv_mode_pins = kfr2r09_mode_pins,
	632	};