fs menu: small reorg
[deliverable/linux.git] / arch / x86 / kernel / mpparse_32.c
CommitLineData
1da177e4
LT
1/*
2 * Intel Multiprocessor Specification 1.1 and 1.4
3 * compliant MP-table parsing routines.
4 *
5 * (c) 1995 Alan Cox, Building #3 <alan@redhat.com>
6 * (c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com>
7 *
8 * Fixes
9 * Erich Boleyn : MP v1.4 and additional changes.
10 * Alan Cox : Added EBDA scanning
11 * Ingo Molnar : various cleanups and rewrites
12 * Maciej W. Rozycki: Bits for default MP configurations
13 * Paul Diefenbaugh: Added full ACPI support
14 */
15
16#include <linux/mm.h>
1da177e4
LT
17#include <linux/init.h>
18#include <linux/acpi.h>
19#include <linux/delay.h>
1da177e4 20#include <linux/bootmem.h>
1da177e4
LT
21#include <linux/kernel_stat.h>
22#include <linux/mc146818rtc.h>
23#include <linux/bitops.h>
24
25#include <asm/smp.h>
26#include <asm/acpi.h>
27#include <asm/mtrr.h>
28#include <asm/mpspec.h>
29#include <asm/io_apic.h>
30
31#include <mach_apic.h>
874c4fe3 32#include <mach_apicdef.h>
1da177e4
LT
33#include <mach_mpparse.h>
34#include <bios_ebda.h>
35
36/* Have we found an MP table */
37int smp_found_config;
4a5d107a 38unsigned int __cpuinitdata maxcpus = NR_CPUS;
1da177e4
LT
39
40/*
41 * Various Linux-internal data structures created from the
42 * MP-table.
43 */
44int apic_version [MAX_APICS];
45int mp_bus_id_to_type [MAX_MP_BUSSES];
46int mp_bus_id_to_node [MAX_MP_BUSSES];
47int mp_bus_id_to_local [MAX_MP_BUSSES];
48int quad_local_to_mp_bus_id [NR_CPUS/4][4];
49int mp_bus_id_to_pci_bus [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 };
50static int mp_current_pci_id;
51
52/* I/O APIC entries */
53struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
54
55/* # of MP IRQ source entries */
56struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
57
58/* MP IRQ source entries */
59int mp_irq_entries;
60
61int nr_ioapics;
62
63int pic_mode;
64unsigned long mp_lapic_addr;
65
911a62d4
VP
66unsigned int def_to_bigsmp = 0;
67
1da177e4
LT
68/* Processor that is doing the boot up */
69unsigned int boot_cpu_physical_apicid = -1U;
1da177e4 70/* Internal processor count */
87d7e980 71unsigned int num_processors;
1da177e4
LT
72
73/* Bitmask of physically existing CPUs */
74physid_mask_t phys_cpu_present_map;
75
76u8 bios_cpu_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID };
77
78/*
79 * Intel MP BIOS table parsing routines:
80 */
81
82
83/*
84 * Checksum an MP configuration block.
85 */
86
87static int __init mpf_checksum(unsigned char *mp, int len)
88{
89 int sum = 0;
90
91 while (len--)
92 sum += *mp++;
93
94 return sum & 0xFF;
95}
96
97/*
98 * Have to match translation table entries to main table entries by counter
99 * hence the mpc_record variable .... can't see a less disgusting way of
100 * doing this ....
101 */
102
103static int mpc_record;
4a5d107a 104static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY] __cpuinitdata;
1da177e4 105
4a5d107a 106static void __cpuinit MP_processor_info (struct mpc_config_processor *m)
1da177e4 107{
1299232b
AM
108 int ver, apicid;
109 physid_mask_t phys_cpu;
1da177e4
LT
110
111 if (!(m->mpc_cpuflag & CPU_ENABLED))
112 return;
113
114 apicid = mpc_apic_id(m, translation_table[mpc_record]);
115
116 if (m->mpc_featureflag&(1<<0))
117 Dprintk(" Floating point unit present.\n");
118 if (m->mpc_featureflag&(1<<7))
119 Dprintk(" Machine Exception supported.\n");
120 if (m->mpc_featureflag&(1<<8))
121 Dprintk(" 64 bit compare & exchange supported.\n");
122 if (m->mpc_featureflag&(1<<9))
123 Dprintk(" Internal APIC present.\n");
124 if (m->mpc_featureflag&(1<<11))
125 Dprintk(" SEP present.\n");
126 if (m->mpc_featureflag&(1<<12))
127 Dprintk(" MTRR present.\n");
128 if (m->mpc_featureflag&(1<<13))
129 Dprintk(" PGE present.\n");
130 if (m->mpc_featureflag&(1<<14))
131 Dprintk(" MCA present.\n");
132 if (m->mpc_featureflag&(1<<15))
133 Dprintk(" CMOV present.\n");
134 if (m->mpc_featureflag&(1<<16))
135 Dprintk(" PAT present.\n");
136 if (m->mpc_featureflag&(1<<17))
137 Dprintk(" PSE present.\n");
138 if (m->mpc_featureflag&(1<<18))
139 Dprintk(" PSN present.\n");
140 if (m->mpc_featureflag&(1<<19))
141 Dprintk(" Cache Line Flush Instruction present.\n");
142 /* 20 Reserved */
143 if (m->mpc_featureflag&(1<<21))
144 Dprintk(" Debug Trace and EMON Store present.\n");
145 if (m->mpc_featureflag&(1<<22))
146 Dprintk(" ACPI Thermal Throttle Registers present.\n");
147 if (m->mpc_featureflag&(1<<23))
148 Dprintk(" MMX present.\n");
149 if (m->mpc_featureflag&(1<<24))
150 Dprintk(" FXSR present.\n");
151 if (m->mpc_featureflag&(1<<25))
152 Dprintk(" XMM present.\n");
153 if (m->mpc_featureflag&(1<<26))
154 Dprintk(" Willamette New Instructions present.\n");
155 if (m->mpc_featureflag&(1<<27))
156 Dprintk(" Self Snoop present.\n");
157 if (m->mpc_featureflag&(1<<28))
158 Dprintk(" HT present.\n");
159 if (m->mpc_featureflag&(1<<29))
160 Dprintk(" Thermal Monitor present.\n");
161 /* 30, 31 Reserved */
162
163
164 if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
165 Dprintk(" Bootup CPU\n");
166 boot_cpu_physical_apicid = m->mpc_apicid;
1da177e4
LT
167 }
168
1da177e4
LT
169 ver = m->mpc_apicver;
170
1da177e4
LT
171 /*
172 * Validate version
173 */
174 if (ver == 0x0) {
1299232b
AM
175 printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! "
176 "fixing up to 0x10. (tell your hw vendor)\n",
177 m->mpc_apicid);
1da177e4
LT
178 ver = 0x10;
179 }
180 apic_version[m->mpc_apicid] = ver;
6c180d94
EB
181
182 phys_cpu = apicid_to_cpu_present(apicid);
183 physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu);
184
185 if (num_processors >= NR_CPUS) {
186 printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
187 " Processor ignored.\n", NR_CPUS);
188 return;
189 }
190
191 if (num_processors >= maxcpus) {
192 printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
193 " Processor ignored.\n", maxcpus);
194 return;
195 }
196
197 cpu_set(num_processors, cpu_possible_map);
198 num_processors++;
199
6cf272ac
AR
200 /*
201 * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
202 * but we need to work other dependencies like SMP_SUSPEND etc
203 * before this can be done without some confusion.
204 * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
205 * - Ashok Raj <ashok.raj@intel.com>
206 */
207 if (num_processors > 8) {
e72c8585
AR
208 switch (boot_cpu_data.x86_vendor) {
209 case X86_VENDOR_INTEL:
210 if (!APIC_XAPIC(ver)) {
211 def_to_bigsmp = 0;
212 break;
213 }
214 /* If P4 and above fall through */
215 case X86_VENDOR_AMD:
216 def_to_bigsmp = 1;
217 }
218 }
1da177e4
LT
219 bios_cpu_apicid[num_processors - 1] = m->mpc_apicid;
220}
221
222static void __init MP_bus_info (struct mpc_config_bus *m)
223{
224 char str[7];
225
226 memcpy(str, m->mpc_bustype, 6);
227 str[6] = 0;
228
229 mpc_oem_bus_info(m, str, translation_table[mpc_record]);
230
5e4edbb7 231#if MAX_MP_BUSSES < 256
c0ec31ad
RD
232 if (m->mpc_busid >= MAX_MP_BUSSES) {
233 printk(KERN_WARNING "MP table busid value (%d) for bustype %s "
234 " is too large, max. supported is %d\n",
235 m->mpc_busid, str, MAX_MP_BUSSES - 1);
236 return;
237 }
5e4edbb7 238#endif
c0ec31ad 239
1da177e4
LT
240 if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA)-1) == 0) {
241 mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA;
242 } else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA)-1) == 0) {
243 mp_bus_id_to_type[m->mpc_busid] = MP_BUS_EISA;
244 } else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI)-1) == 0) {
245 mpc_oem_pci_bus(m, translation_table[mpc_record]);
246 mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI;
247 mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id;
248 mp_current_pci_id++;
249 } else if (strncmp(str, BUSTYPE_MCA, sizeof(BUSTYPE_MCA)-1) == 0) {
250 mp_bus_id_to_type[m->mpc_busid] = MP_BUS_MCA;
1da177e4
LT
251 } else {
252 printk(KERN_WARNING "Unknown bustype %s - ignoring\n", str);
253 }
254}
255
256static void __init MP_ioapic_info (struct mpc_config_ioapic *m)
257{
258 if (!(m->mpc_flags & MPC_APIC_USABLE))
259 return;
260
64883ab0 261 printk(KERN_INFO "I/O APIC #%d Version %d at 0x%X.\n",
1da177e4
LT
262 m->mpc_apicid, m->mpc_apicver, m->mpc_apicaddr);
263 if (nr_ioapics >= MAX_IO_APICS) {
264 printk(KERN_CRIT "Max # of I/O APICs (%d) exceeded (found %d).\n",
265 MAX_IO_APICS, nr_ioapics);
266 panic("Recompile kernel with bigger MAX_IO_APICS!.\n");
267 }
268 if (!m->mpc_apicaddr) {
269 printk(KERN_ERR "WARNING: bogus zero I/O APIC address"
270 " found in MP table, skipping!\n");
271 return;
272 }
273 mp_ioapics[nr_ioapics] = *m;
274 nr_ioapics++;
275}
276
277static void __init MP_intsrc_info (struct mpc_config_intsrc *m)
278{
279 mp_irqs [mp_irq_entries] = *m;
280 Dprintk("Int: type %d, pol %d, trig %d, bus %d,"
281 " IRQ %02x, APIC ID %x, APIC INT %02x\n",
282 m->mpc_irqtype, m->mpc_irqflag & 3,
283 (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus,
284 m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq);
285 if (++mp_irq_entries == MAX_IRQ_SOURCES)
286 panic("Max # of irq sources exceeded!!\n");
287}
288
289static void __init MP_lintsrc_info (struct mpc_config_lintsrc *m)
290{
291 Dprintk("Lint: type %d, pol %d, trig %d, bus %d,"
292 " IRQ %02x, APIC ID %x, APIC LINT %02x\n",
293 m->mpc_irqtype, m->mpc_irqflag & 3,
294 (m->mpc_irqflag >> 2) &3, m->mpc_srcbusid,
295 m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint);
1da177e4
LT
296}
297
298#ifdef CONFIG_X86_NUMAQ
299static void __init MP_translation_info (struct mpc_config_translation *m)
300{
301 printk(KERN_INFO "Translation: record %d, type %d, quad %d, global %d, local %d\n", mpc_record, m->trans_type, m->trans_quad, m->trans_global, m->trans_local);
302
303 if (mpc_record >= MAX_MPC_ENTRY)
304 printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
305 else
306 translation_table[mpc_record] = m; /* stash this for later */
307 if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad))
308 node_set_online(m->trans_quad);
309}
310
311/*
312 * Read/parse the MPC oem tables
313 */
314
315static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable, \
316 unsigned short oemsize)
317{
318 int count = sizeof (*oemtable); /* the header size */
319 unsigned char *oemptr = ((unsigned char *)oemtable)+count;
320
321 mpc_record = 0;
322 printk(KERN_INFO "Found an OEM MPC table at %8p - parsing it ... \n", oemtable);
323 if (memcmp(oemtable->oem_signature,MPC_OEM_SIGNATURE,4))
324 {
325 printk(KERN_WARNING "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
326 oemtable->oem_signature[0],
327 oemtable->oem_signature[1],
328 oemtable->oem_signature[2],
329 oemtable->oem_signature[3]);
330 return;
331 }
332 if (mpf_checksum((unsigned char *)oemtable,oemtable->oem_length))
333 {
334 printk(KERN_WARNING "SMP oem mptable: checksum error!\n");
335 return;
336 }
337 while (count < oemtable->oem_length) {
338 switch (*oemptr) {
339 case MP_TRANSLATION:
340 {
341 struct mpc_config_translation *m=
342 (struct mpc_config_translation *)oemptr;
343 MP_translation_info(m);
344 oemptr += sizeof(*m);
345 count += sizeof(*m);
346 ++mpc_record;
347 break;
348 }
349 default:
350 {
351 printk(KERN_WARNING "Unrecognised OEM table entry type! - %d\n", (int) *oemptr);
352 return;
353 }
354 }
355 }
356}
357
358static inline void mps_oem_check(struct mp_config_table *mpc, char *oem,
359 char *productid)
360{
361 if (strncmp(oem, "IBM NUMA", 8))
362 printk("Warning! May not be a NUMA-Q system!\n");
363 if (mpc->mpc_oemptr)
364 smp_read_mpc_oem((struct mp_config_oemtable *) mpc->mpc_oemptr,
365 mpc->mpc_oemsize);
366}
367#endif /* CONFIG_X86_NUMAQ */
368
369/*
370 * Read/parse the MPC
371 */
372
373static int __init smp_read_mpc(struct mp_config_table *mpc)
374{
375 char str[16];
376 char oem[10];
377 int count=sizeof(*mpc);
378 unsigned char *mpt=((unsigned char *)mpc)+count;
379
380 if (memcmp(mpc->mpc_signature,MPC_SIGNATURE,4)) {
381 printk(KERN_ERR "SMP mptable: bad signature [0x%x]!\n",
382 *(u32 *)mpc->mpc_signature);
383 return 0;
384 }
385 if (mpf_checksum((unsigned char *)mpc,mpc->mpc_length)) {
386 printk(KERN_ERR "SMP mptable: checksum error!\n");
387 return 0;
388 }
389 if (mpc->mpc_spec!=0x01 && mpc->mpc_spec!=0x04) {
390 printk(KERN_ERR "SMP mptable: bad table version (%d)!!\n",
391 mpc->mpc_spec);
392 return 0;
393 }
394 if (!mpc->mpc_lapic) {
395 printk(KERN_ERR "SMP mptable: null local APIC address!\n");
396 return 0;
397 }
398 memcpy(oem,mpc->mpc_oem,8);
399 oem[8]=0;
400 printk(KERN_INFO "OEM ID: %s ",oem);
401
402 memcpy(str,mpc->mpc_productid,12);
403 str[12]=0;
404 printk("Product ID: %s ",str);
405
406 mps_oem_check(mpc, oem, str);
407
64883ab0 408 printk("APIC at: 0x%X\n", mpc->mpc_lapic);
1da177e4 409
64883ab0 410 /*
1da177e4
LT
411 * Save the local APIC address (it might be non-default) -- but only
412 * if we're not using ACPI.
413 */
414 if (!acpi_lapic)
415 mp_lapic_addr = mpc->mpc_lapic;
416
417 /*
418 * Now process the configuration blocks.
419 */
420 mpc_record = 0;
421 while (count < mpc->mpc_length) {
422 switch(*mpt) {
423 case MP_PROCESSOR:
424 {
425 struct mpc_config_processor *m=
426 (struct mpc_config_processor *)mpt;
427 /* ACPI may have already provided this data */
428 if (!acpi_lapic)
429 MP_processor_info(m);
430 mpt += sizeof(*m);
431 count += sizeof(*m);
432 break;
433 }
434 case MP_BUS:
435 {
436 struct mpc_config_bus *m=
437 (struct mpc_config_bus *)mpt;
438 MP_bus_info(m);
439 mpt += sizeof(*m);
440 count += sizeof(*m);
441 break;
442 }
443 case MP_IOAPIC:
444 {
445 struct mpc_config_ioapic *m=
446 (struct mpc_config_ioapic *)mpt;
447 MP_ioapic_info(m);
448 mpt+=sizeof(*m);
449 count+=sizeof(*m);
450 break;
451 }
452 case MP_INTSRC:
453 {
454 struct mpc_config_intsrc *m=
455 (struct mpc_config_intsrc *)mpt;
456
457 MP_intsrc_info(m);
458 mpt+=sizeof(*m);
459 count+=sizeof(*m);
460 break;
461 }
462 case MP_LINTSRC:
463 {
464 struct mpc_config_lintsrc *m=
465 (struct mpc_config_lintsrc *)mpt;
466 MP_lintsrc_info(m);
467 mpt+=sizeof(*m);
468 count+=sizeof(*m);
469 break;
470 }
471 default:
472 {
473 count = mpc->mpc_length;
474 break;
475 }
476 }
477 ++mpc_record;
478 }
3c43f039 479 setup_apic_routing();
1da177e4
LT
480 if (!num_processors)
481 printk(KERN_ERR "SMP mptable: no processors registered!\n");
482 return num_processors;
483}
484
485static int __init ELCR_trigger(unsigned int irq)
486{
487 unsigned int port;
488
489 port = 0x4d0 + (irq >> 3);
490 return (inb(port) >> (irq & 7)) & 1;
491}
492
493static void __init construct_default_ioirq_mptable(int mpc_default_type)
494{
495 struct mpc_config_intsrc intsrc;
496 int i;
497 int ELCR_fallback = 0;
498
499 intsrc.mpc_type = MP_INTSRC;
500 intsrc.mpc_irqflag = 0; /* conforming */
501 intsrc.mpc_srcbus = 0;
502 intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid;
503
504 intsrc.mpc_irqtype = mp_INT;
505
506 /*
507 * If true, we have an ISA/PCI system with no IRQ entries
508 * in the MP table. To prevent the PCI interrupts from being set up
509 * incorrectly, we try to use the ELCR. The sanity check to see if
510 * there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can
511 * never be level sensitive, so we simply see if the ELCR agrees.
512 * If it does, we assume it's valid.
513 */
514 if (mpc_default_type == 5) {
515 printk(KERN_INFO "ISA/PCI bus type with no IRQ information... falling back to ELCR\n");
516
517 if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) || ELCR_trigger(13))
518 printk(KERN_WARNING "ELCR contains invalid data... not using ELCR\n");
519 else {
520 printk(KERN_INFO "Using ELCR to identify PCI interrupts\n");
521 ELCR_fallback = 1;
522 }
523 }
524
525 for (i = 0; i < 16; i++) {
526 switch (mpc_default_type) {
527 case 2:
528 if (i == 0 || i == 13)
529 continue; /* IRQ0 & IRQ13 not connected */
530 /* fall through */
531 default:
532 if (i == 2)
533 continue; /* IRQ2 is never connected */
534 }
535
536 if (ELCR_fallback) {
537 /*
538 * If the ELCR indicates a level-sensitive interrupt, we
539 * copy that information over to the MP table in the
540 * irqflag field (level sensitive, active high polarity).
541 */
542 if (ELCR_trigger(i))
543 intsrc.mpc_irqflag = 13;
544 else
545 intsrc.mpc_irqflag = 0;
546 }
547
548 intsrc.mpc_srcbusirq = i;
549 intsrc.mpc_dstirq = i ? i : 2; /* IRQ0 to INTIN2 */
550 MP_intsrc_info(&intsrc);
551 }
552
553 intsrc.mpc_irqtype = mp_ExtINT;
554 intsrc.mpc_srcbusirq = 0;
555 intsrc.mpc_dstirq = 0; /* 8259A to INTIN0 */
556 MP_intsrc_info(&intsrc);
557}
558
559static inline void __init construct_default_ISA_mptable(int mpc_default_type)
560{
561 struct mpc_config_processor processor;
562 struct mpc_config_bus bus;
563 struct mpc_config_ioapic ioapic;
564 struct mpc_config_lintsrc lintsrc;
565 int linttypes[2] = { mp_ExtINT, mp_NMI };
566 int i;
567
568 /*
569 * local APIC has default address
570 */
571 mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
572
573 /*
574 * 2 CPUs, numbered 0 & 1.
575 */
576 processor.mpc_type = MP_PROCESSOR;
577 /* Either an integrated APIC or a discrete 82489DX. */
578 processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
579 processor.mpc_cpuflag = CPU_ENABLED;
580 processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) |
581 (boot_cpu_data.x86_model << 4) |
582 boot_cpu_data.x86_mask;
583 processor.mpc_featureflag = boot_cpu_data.x86_capability[0];
584 processor.mpc_reserved[0] = 0;
585 processor.mpc_reserved[1] = 0;
586 for (i = 0; i < 2; i++) {
587 processor.mpc_apicid = i;
588 MP_processor_info(&processor);
589 }
590
591 bus.mpc_type = MP_BUS;
592 bus.mpc_busid = 0;
593 switch (mpc_default_type) {
594 default:
595 printk("???\n");
596 printk(KERN_ERR "Unknown standard configuration %d\n",
597 mpc_default_type);
598 /* fall through */
599 case 1:
600 case 5:
601 memcpy(bus.mpc_bustype, "ISA ", 6);
602 break;
603 case 2:
604 case 6:
605 case 3:
606 memcpy(bus.mpc_bustype, "EISA ", 6);
607 break;
608 case 4:
609 case 7:
610 memcpy(bus.mpc_bustype, "MCA ", 6);
611 }
612 MP_bus_info(&bus);
613 if (mpc_default_type > 4) {
614 bus.mpc_busid = 1;
615 memcpy(bus.mpc_bustype, "PCI ", 6);
616 MP_bus_info(&bus);
617 }
618
619 ioapic.mpc_type = MP_IOAPIC;
620 ioapic.mpc_apicid = 2;
621 ioapic.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
622 ioapic.mpc_flags = MPC_APIC_USABLE;
623 ioapic.mpc_apicaddr = 0xFEC00000;
624 MP_ioapic_info(&ioapic);
625
626 /*
627 * We set up most of the low 16 IO-APIC pins according to MPS rules.
628 */
629 construct_default_ioirq_mptable(mpc_default_type);
630
631 lintsrc.mpc_type = MP_LINTSRC;
632 lintsrc.mpc_irqflag = 0; /* conforming */
633 lintsrc.mpc_srcbusid = 0;
634 lintsrc.mpc_srcbusirq = 0;
635 lintsrc.mpc_destapic = MP_APIC_ALL;
636 for (i = 0; i < 2; i++) {
637 lintsrc.mpc_irqtype = linttypes[i];
638 lintsrc.mpc_destapiclint = i;
639 MP_lintsrc_info(&lintsrc);
640 }
641}
642
643static struct intel_mp_floating *mpf_found;
644
645/*
646 * Scan the memory blocks for an SMP configuration block.
647 */
648void __init get_smp_config (void)
649{
650 struct intel_mp_floating *mpf = mpf_found;
651
652 /*
1da177e4
LT
653 * ACPI supports both logical (e.g. Hyper-Threading) and physical
654 * processors, where MPS only supports physical.
655 */
656 if (acpi_lapic && acpi_ioapic) {
657 printk(KERN_INFO "Using ACPI (MADT) for SMP configuration information\n");
658 return;
659 }
660 else if (acpi_lapic)
661 printk(KERN_INFO "Using ACPI for processor (LAPIC) configuration information\n");
662
663 printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification);
664 if (mpf->mpf_feature2 & (1<<7)) {
665 printk(KERN_INFO " IMCR and PIC compatibility mode.\n");
666 pic_mode = 1;
667 } else {
668 printk(KERN_INFO " Virtual Wire compatibility mode.\n");
669 pic_mode = 0;
670 }
671
672 /*
673 * Now see if we need to read further.
674 */
675 if (mpf->mpf_feature1 != 0) {
676
677 printk(KERN_INFO "Default MP configuration #%d\n", mpf->mpf_feature1);
678 construct_default_ISA_mptable(mpf->mpf_feature1);
679
680 } else if (mpf->mpf_physptr) {
681
682 /*
683 * Read the physical hardware table. Anything here will
684 * override the defaults.
685 */
7d4c8e56 686 if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr))) {
1da177e4
LT
687 smp_found_config = 0;
688 printk(KERN_ERR "BIOS bug, MP table errors detected!...\n");
689 printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n");
690 return;
691 }
692 /*
693 * If there are no explicit MP IRQ entries, then we are
694 * broken. We set up most of the low 16 IO-APIC pins to
695 * ISA defaults and hope it will work.
696 */
697 if (!mp_irq_entries) {
698 struct mpc_config_bus bus;
699
700 printk(KERN_ERR "BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n");
701
702 bus.mpc_type = MP_BUS;
703 bus.mpc_busid = 0;
704 memcpy(bus.mpc_bustype, "ISA ", 6);
705 MP_bus_info(&bus);
706
707 construct_default_ioirq_mptable(0);
708 }
709
710 } else
711 BUG();
712
713 printk(KERN_INFO "Processors: %d\n", num_processors);
714 /*
715 * Only use the first configuration found.
716 */
717}
718
719static int __init smp_scan_config (unsigned long base, unsigned long length)
720{
721 unsigned long *bp = phys_to_virt(base);
722 struct intel_mp_floating *mpf;
723
e91a3b43 724 printk(KERN_INFO "Scan SMP from %p for %ld bytes.\n", bp,length);
1da177e4
LT
725 if (sizeof(*mpf) != 16)
726 printk("Error: MPF size\n");
727
728 while (length > 0) {
729 mpf = (struct intel_mp_floating *)bp;
730 if ((*bp == SMP_MAGIC_IDENT) &&
731 (mpf->mpf_length == 1) &&
732 !mpf_checksum((unsigned char *)bp, 16) &&
733 ((mpf->mpf_specification == 1)
734 || (mpf->mpf_specification == 4)) ) {
735
736 smp_found_config = 1;
e91a3b43
IM
737 printk(KERN_INFO "found SMP MP-table at [%p] %08lx\n",
738 mpf, virt_to_phys(mpf));
1da177e4
LT
739 reserve_bootmem(virt_to_phys(mpf), PAGE_SIZE);
740 if (mpf->mpf_physptr) {
741 /*
742 * We cannot access to MPC table to compute
743 * table size yet, as only few megabytes from
744 * the bottom is mapped now.
745 * PC-9800's MPC table places on the very last
746 * of physical memory; so that simply reserving
747 * PAGE_SIZE from mpg->mpf_physptr yields BUG()
748 * in reserve_bootmem.
749 */
750 unsigned long size = PAGE_SIZE;
751 unsigned long end = max_low_pfn * PAGE_SIZE;
752 if (mpf->mpf_physptr + size > end)
753 size = end - mpf->mpf_physptr;
754 reserve_bootmem(mpf->mpf_physptr, size);
755 }
756
757 mpf_found = mpf;
758 return 1;
759 }
760 bp += 4;
761 length -= 16;
762 }
763 return 0;
764}
765
766void __init find_smp_config (void)
767{
768 unsigned int address;
769
770 /*
771 * FIXME: Linux assumes you have 640K of base ram..
772 * this continues the error...
773 *
774 * 1) Scan the bottom 1K for a signature
775 * 2) Scan the top 1K of base RAM
776 * 3) Scan the 64K of bios
777 */
778 if (smp_scan_config(0x0,0x400) ||
779 smp_scan_config(639*0x400,0x400) ||
780 smp_scan_config(0xF0000,0x10000))
781 return;
782 /*
783 * If it is an SMP machine we should know now, unless the
784 * configuration is in an EISA/MCA bus machine with an
785 * extended bios data area.
786 *
787 * there is a real-mode segmented pointer pointing to the
788 * 4K EBDA area at 0x40E, calculate and scan it here.
789 *
790 * NOTE! There are Linux loaders that will corrupt the EBDA
791 * area, and as such this kind of SMP config may be less
792 * trustworthy, simply because the SMP table may have been
793 * stomped on during early boot. These loaders are buggy and
794 * should be fixed.
795 *
796 * MP1.4 SPEC states to only scan first 1K of 4K EBDA.
797 */
798
799 address = get_bios_ebda();
800 if (address)
801 smp_scan_config(address, 0x400);
802}
803
e5428ede
NP
804int es7000_plat;
805
1da177e4
LT
806/* --------------------------------------------------------------------------
807 ACPI-based MP Configuration
808 -------------------------------------------------------------------------- */
809
888ba6c6 810#ifdef CONFIG_ACPI
1da177e4 811
19f03ffe 812void __init mp_register_lapic_address(u64 address)
1da177e4
LT
813{
814 mp_lapic_addr = (unsigned long) address;
815
816 set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr);
817
818 if (boot_cpu_physical_apicid == -1U)
819 boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
820
821 Dprintk("Boot CPU = %d\n", boot_cpu_physical_apicid);
822}
823
4a5d107a 824void __cpuinit mp_register_lapic (u8 id, u8 enabled)
1da177e4
LT
825{
826 struct mpc_config_processor processor;
19f03ffe 827 int boot_cpu = 0;
1da177e4
LT
828
829 if (MAX_APICS - id <= 0) {
830 printk(KERN_WARNING "Processor #%d invalid (max %d)\n",
831 id, MAX_APICS);
832 return;
833 }
834
835 if (id == boot_cpu_physical_apicid)
836 boot_cpu = 1;
837
838 processor.mpc_type = MP_PROCESSOR;
839 processor.mpc_apicid = id;
840 processor.mpc_apicver = GET_APIC_VERSION(apic_read(APIC_LVR));
841 processor.mpc_cpuflag = (enabled ? CPU_ENABLED : 0);
842 processor.mpc_cpuflag |= (boot_cpu ? CPU_BOOTPROCESSOR : 0);
843 processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) |
844 (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask;
845 processor.mpc_featureflag = boot_cpu_data.x86_capability[0];
846 processor.mpc_reserved[0] = 0;
847 processor.mpc_reserved[1] = 0;
848
849 MP_processor_info(&processor);
850}
851
8466361a 852#ifdef CONFIG_X86_IO_APIC
1da177e4
LT
853
854#define MP_ISA_BUS 0
855#define MP_MAX_IOAPIC_PIN 127
856
857static struct mp_ioapic_routing {
858 int apic_id;
859 int gsi_base;
860 int gsi_end;
861 u32 pin_programmed[4];
862} mp_ioapic_routing[MAX_IO_APICS];
863
19f03ffe 864static int mp_find_ioapic (int gsi)
1da177e4 865{
19f03ffe 866 int i = 0;
1da177e4
LT
867
868 /* Find the IOAPIC that manages this GSI. */
869 for (i = 0; i < nr_ioapics; i++) {
870 if ((gsi >= mp_ioapic_routing[i].gsi_base)
871 && (gsi <= mp_ioapic_routing[i].gsi_end))
872 return i;
873 }
874
875 printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
876
877 return -1;
878}
1da177e4 879
19f03ffe 880void __init mp_register_ioapic(u8 id, u32 address, u32 gsi_base)
1da177e4 881{
19f03ffe
AK
882 int idx = 0;
883 int tmpid;
1da177e4
LT
884
885 if (nr_ioapics >= MAX_IO_APICS) {
886 printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
887 "(found %d)\n", MAX_IO_APICS, nr_ioapics);
888 panic("Recompile kernel with bigger MAX_IO_APICS!\n");
889 }
890 if (!address) {
891 printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
892 " found in MADT table, skipping!\n");
893 return;
894 }
895
896 idx = nr_ioapics++;
897
898 mp_ioapics[idx].mpc_type = MP_IOAPIC;
899 mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE;
900 mp_ioapics[idx].mpc_apicaddr = address;
901
902 set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
7c5c1e42
SL
903 if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
904 && !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
6070f9ec 905 tmpid = io_apic_get_unique_id(idx, id);
ca05fea6 906 else
6070f9ec
AD
907 tmpid = id;
908 if (tmpid == -1) {
909 nr_ioapics--;
910 return;
911 }
912 mp_ioapics[idx].mpc_apicid = tmpid;
1da177e4
LT
913 mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx);
914
915 /*
916 * Build basic GSI lookup table to facilitate gsi->io_apic lookups
917 * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
918 */
919 mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid;
920 mp_ioapic_routing[idx].gsi_base = gsi_base;
64883ab0 921 mp_ioapic_routing[idx].gsi_end = gsi_base +
1da177e4
LT
922 io_apic_get_redir_entries(idx);
923
64883ab0
TG
924 printk("IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
925 "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid,
926 mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr,
927 mp_ioapic_routing[idx].gsi_base,
928 mp_ioapic_routing[idx].gsi_end);
1da177e4
LT
929}
930
19f03ffe
AK
931void __init
932mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
1da177e4
LT
933{
934 struct mpc_config_intsrc intsrc;
935 int ioapic = -1;
936 int pin = -1;
937
938 /*
939 * Convert 'gsi' to 'ioapic.pin'.
940 */
941 ioapic = mp_find_ioapic(gsi);
942 if (ioapic < 0)
943 return;
944 pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
945
946 /*
947 * TBD: This check is for faulty timer entries, where the override
948 * erroneously sets the trigger to level, resulting in a HUGE
949 * increase of timer interrupts!
950 */
951 if ((bus_irq == 0) && (trigger == 3))
952 trigger = 1;
953
954 intsrc.mpc_type = MP_INTSRC;
955 intsrc.mpc_irqtype = mp_INT;
956 intsrc.mpc_irqflag = (trigger << 2) | polarity;
957 intsrc.mpc_srcbus = MP_ISA_BUS;
958 intsrc.mpc_srcbusirq = bus_irq; /* IRQ */
959 intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; /* APIC ID */
960 intsrc.mpc_dstirq = pin; /* INTIN# */
961
962 Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, %d-%d\n",
963 intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
964 (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
965 intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, intsrc.mpc_dstirq);
966
967 mp_irqs[mp_irq_entries] = intsrc;
968 if (++mp_irq_entries == MAX_IRQ_SOURCES)
969 panic("Max # of irq sources exceeded!\n");
1da177e4
LT
970}
971
1da177e4
LT
972void __init mp_config_acpi_legacy_irqs (void)
973{
974 struct mpc_config_intsrc intsrc;
19f03ffe
AK
975 int i = 0;
976 int ioapic = -1;
1da177e4
LT
977
978 /*
979 * Fabricate the legacy ISA bus (bus #31).
980 */
981 mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA;
982 Dprintk("Bus #%d is ISA\n", MP_ISA_BUS);
983
984 /*
985 * Older generations of ES7000 have no legacy identity mappings
986 */
987 if (es7000_plat == 1)
988 return;
989
990 /*
991 * Locate the IOAPIC that manages the ISA IRQs (0-15).
992 */
993 ioapic = mp_find_ioapic(0);
994 if (ioapic < 0)
995 return;
996
997 intsrc.mpc_type = MP_INTSRC;
998 intsrc.mpc_irqflag = 0; /* Conforming */
999 intsrc.mpc_srcbus = MP_ISA_BUS;
1000 intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid;
1001
1002 /*
1003 * Use the default configuration for the IRQs 0-15. Unless
27b46d76 1004 * overridden by (MADT) interrupt source override entries.
1da177e4
LT
1005 */
1006 for (i = 0; i < 16; i++) {
1007 int idx;
1008
1009 for (idx = 0; idx < mp_irq_entries; idx++) {
1010 struct mpc_config_intsrc *irq = mp_irqs + idx;
1011
1012 /* Do we already have a mapping for this ISA IRQ? */
1013 if (irq->mpc_srcbus == MP_ISA_BUS && irq->mpc_srcbusirq == i)
1014 break;
1015
1016 /* Do we already have a mapping for this IOAPIC pin */
1017 if ((irq->mpc_dstapic == intsrc.mpc_dstapic) &&
1018 (irq->mpc_dstirq == i))
1019 break;
1020 }
1021
1022 if (idx != mp_irq_entries) {
1023 printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i);
1024 continue; /* IRQ already used */
1025 }
1026
1027 intsrc.mpc_irqtype = mp_INT;
1028 intsrc.mpc_srcbusirq = i; /* Identity mapped */
1029 intsrc.mpc_dstirq = i;
1030
1031 Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, "
1032 "%d-%d\n", intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
1033 (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
1034 intsrc.mpc_srcbusirq, intsrc.mpc_dstapic,
1035 intsrc.mpc_dstirq);
1036
1037 mp_irqs[mp_irq_entries] = intsrc;
1038 if (++mp_irq_entries == MAX_IRQ_SOURCES)
1039 panic("Max # of irq sources exceeded!\n");
1040 }
1041}
1042
c434b7a6 1043#define MAX_GSI_NUM 4096
2ba7deef 1044#define IRQ_COMPRESSION_START 64
c434b7a6 1045
19f03ffe 1046int mp_register_gsi(u32 gsi, int triggering, int polarity)
1da177e4 1047{
19f03ffe
AK
1048 int ioapic = -1;
1049 int ioapic_pin = 0;
1050 int idx, bit = 0;
2ba7deef 1051 static int pci_irq = IRQ_COMPRESSION_START;
c434b7a6 1052 /*
ab4a574e 1053 * Mapping between Global System Interrupts, which
c434b7a6
NP
1054 * represent all possible interrupts, and IRQs
1055 * assigned to actual devices.
1056 */
1057 static int gsi_to_irq[MAX_GSI_NUM];
1da177e4 1058
1da177e4 1059 /* Don't set up the ACPI SCI because it's already set up */
cee324b1 1060 if (acpi_gbl_FADT.sci_interrupt == gsi)
1da177e4 1061 return gsi;
1da177e4
LT
1062
1063 ioapic = mp_find_ioapic(gsi);
1064 if (ioapic < 0) {
1065 printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi);
1066 return gsi;
1067 }
1068
1069 ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
1070
1071 if (ioapic_renumber_irq)
1072 gsi = ioapic_renumber_irq(ioapic, gsi);
1073
1074 /*
1075 * Avoid pin reprogramming. PRTs typically include entries
1076 * with redundant pin->gsi mappings (but unique PCI devices);
1077 * we only program the IOAPIC on the first.
1078 */
1079 bit = ioapic_pin % 32;
1080 idx = (ioapic_pin < 32) ? 0 : (ioapic_pin / 32);
1081 if (idx > 3) {
1082 printk(KERN_ERR "Invalid reference to IOAPIC pin "
1083 "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
1084 ioapic_pin);
1085 return gsi;
1086 }
1087 if ((1<<bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) {
1088 Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
1089 mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
2ba7deef 1090 return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
1da177e4
LT
1091 }
1092
1093 mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit);
1094
2ba7deef
LB
1095 /*
1096 * For GSI >= 64, use IRQ compression
1097 */
1098 if ((gsi >= IRQ_COMPRESSION_START)
1099 && (triggering == ACPI_LEVEL_SENSITIVE)) {
c434b7a6
NP
1100 /*
1101 * For PCI devices assign IRQs in order, avoiding gaps
1102 * due to unused I/O APIC pins.
1103 */
1104 int irq = gsi;
1105 if (gsi < MAX_GSI_NUM) {
e0c1e9bf
KM
1106 /*
1107 * Retain the VIA chipset work-around (gsi > 15), but
1108 * avoid a problem where the 8254 timer (IRQ0) is setup
1109 * via an override (so it's not on pin 0 of the ioapic),
1110 * and at the same time, the pin 0 interrupt is a PCI
1111 * type. The gsi > 15 test could cause these two pins
1112 * to be shared as IRQ0, and they are not shareable.
1113 * So test for this condition, and if necessary, avoid
1114 * the pin collision.
1115 */
1116 if (gsi > 15 || (gsi == 0 && !timer_uses_ioapic_pin_0))
e1afc3f5 1117 gsi = pci_irq++;
e1afc3f5
NP
1118 /*
1119 * Don't assign IRQ used by ACPI SCI
1120 */
cee324b1 1121 if (gsi == acpi_gbl_FADT.sci_interrupt)
e1afc3f5 1122 gsi = pci_irq++;
c434b7a6
NP
1123 gsi_to_irq[irq] = gsi;
1124 } else {
1125 printk(KERN_ERR "GSI %u is too high\n", gsi);
1126 return gsi;
1127 }
1128 }
1129
1da177e4 1130 io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
cb654695
LB
1131 triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
1132 polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
1da177e4
LT
1133 return gsi;
1134}
1135
8466361a 1136#endif /* CONFIG_X86_IO_APIC */
888ba6c6 1137#endif /* CONFIG_ACPI */
This page took 0.405701 seconds and 5 git commands to generate.