* hosts/sysv4.h (HAVE_PROCFS): Add comments about ptx4.

[deliverable/binutils-gdb.git] / bfd / configure.host

# This file is a shell script that supplies the information necessary
# to tailor a template configure script into the configure script
# appropriate for this directory.  For more information, check any
# existing configure script.

# Since the "bfd/hosts" directory is shared by the bfd, opcodes, and
# binutils directories (at least), the index to it is also shared.
# This is that index.  Each configure.in file should source this file
# in its per-host part.

case "${host}" in
# WHEN ADDING ENTRIES TO THIS MATRIX:
#  Make sure that the left side always has two dashes.  Otherwise you
#  can get spurious matches.  Even for unambiguous cases, do this as a
#  convention, else the table becomes a real mess to understand and maintain.
#
# Note that these entries cannot be fully alphabetical.  Don't try.
# The order of matching is critical when multiple lines could match.

alpha-*-*)		my_host=alphaosf ; host64=true ;;
a29k-*-*)		my_host=ultra3 ;;

hppa*-*-hpux*)		my_host=hppahpux ;;
hppa*-*-hiux*)		my_host=hppahpux ;;
hppa*-*-bsd*)		my_host=hppabsd ;;
hppa*-*-osf*)		my_host=hppaosf ;;

i[34]86-sequent-bsd*)	my_host=symmetry ;;
i[34]86-sequent-sysv4*)	my_host=sysv4 ;;
i[34]86-sequent-sysv*)	my_host=symmetry ;;
i[34]86-*-bsd*)		my_host=i386bsd ;;
i[34]86-*-netbsd*)	my_host=i386bsd ;;
i[34]86-ncr*-sysv4*)	my_host=ncr3000 ;;
i[34]86-*-go32*)	my_host=go32 ;;
i[34]86-esix-sysv3*)	my_host=esix ;;
i[34]86-*-sysv4*)	my_host=i386v4 ;;
i[34]86-*-sysv*)	my_host=i386v ;;
i[34]86-*-solaris*)	my_host=i386v ;;
i[34]86-*-sco*)		my_host=i386sco ;;
i[34]86-*-mach*)	my_host=i386mach3 ;;
i[34]86-*-osf1mk*)	my_host=i386osf1mk ;;
i[34]86-*-msdos*)	my_host=dose ;;
i[34]86-*-linux*)	my_host=i386linux ;;
i[34]86-*-lynxos*)	my_host=i386lynx ;;
i[34]86-*-isc*)		my_host=i386sco ;;
i[34]86-*-aix*)		my_host=i386aix ;;

i860-*-*)		my_host=stratus ;;

mips-dec-bsd*)          my_host=mipsbsd ;;
mips-dec-*)		my_host=decstation ;;
mips-sgi-irix3*)	my_host=irix3 ;;
mips-sgi-irix4*)	my_host=irix4 ;;
mips-sgi-irix5*)	my_host=irix5 ;;
mips-*-sysv*)		my_host=riscos ;;
mips-*-riscos*)		my_host=riscos ;;
mips-sony-bsd*)		my_host=news-mips ;;

m68*-apollo*-sysv*)	my_host=apollov68 ;;
m68*-apollo*-bsd*)	my_host=apollo68 ;;
m68*-bull*-sysv*)	my_host=dpx2 ;;
m68*-convergent-sysv*)	my_host=miniframe ;;
m68*-cbm-amigados*)	my_host=amigados ;;
m68*-cbm-sysv4*)	my_host=amix ;;
m68*-hp-hpux*)		my_host=hp300 ;;
m68*-hp-bsd*)		my_host=hp300bsd ;;
m68*-*-lynxos*)		my_host=m68klynx ;;
m68*-motorola-sysv*)	my_host=delta68 ;;
m68*-sony-*)		my_host=news ;;
m68*-sun-*)		my_host=sun3 ;;

m88*-*-sysv4*)		my_host=delta88v4 ;;
m88*-motorola-sysv*)	my_host=delta88 ;;
m88*-harris-*)		my_host=harris ;;
m88*-*-dgux*)		my_host=dgux ;;

# Apparently the same config file as for 386 works.
ns32k-*-mach*)		my_host=i386mach3 ;;

romp-*-*)		my_host=rtbsd ;;

rs6000-*-lynx*)		my_host=rs6000lynx ;;

rs6000-*-*)		my_host=rs6000 ;;

sparc-*-lynxos*)	my_host=sparclynx ;;
sparc-*-sunos64*)	my_host=sparc-ll ;;
sparc-*-sysv4*)		my_host=sysv4 ;;
sparc-*-solaris2*)	my_host=solaris2 ;;
sparc-*-sysv64*)	my_host=sysv4-ll ;;
sparc-*-*)		my_host=sparc ;;

tahoe-*-*)		my_host=tahoe ;;

vax-*-ultrix2*)		my_host=vaxult2 ;;
vax-*-ultrix*)		my_host=vaxult ;;
vax-*-*)		my_host=vaxbsd ;;

we32k-*-*)		my_host=we32k ;;

esac