ACPICA 20050408 from Bob Moore
[deliverable/linux.git] / drivers / acpi / events / evxfevnt.c
CommitLineData
1da177e4
LT
1/******************************************************************************
2 *
3 * Module Name: evxfevnt - External Interfaces, ACPI event disable/enable
4 *
5 *****************************************************************************/
6
7/*
8 * Copyright (C) 2000 - 2005, R. Byron Moore
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44#include <linux/module.h>
45
46#include <acpi/acpi.h>
47#include <acpi/acevents.h>
48#include <acpi/acnamesp.h>
49
50#define _COMPONENT ACPI_EVENTS
51 ACPI_MODULE_NAME ("evxfevnt")
52
53
54/*******************************************************************************
55 *
56 * FUNCTION: acpi_enable
57 *
58 * PARAMETERS: None
59 *
60 * RETURN: Status
61 *
62 * DESCRIPTION: Transfers the system into ACPI mode.
63 *
64 ******************************************************************************/
65
66acpi_status
44f6c012
RM
67acpi_enable (
68 void)
1da177e4
LT
69{
70 acpi_status status = AE_OK;
71
72
73 ACPI_FUNCTION_TRACE ("acpi_enable");
74
75
76 /* Make sure we have the FADT*/
77
78 if (!acpi_gbl_FADT) {
79 ACPI_DEBUG_PRINT ((ACPI_DB_WARN, "No FADT information present!\n"));
80 return_ACPI_STATUS (AE_NO_ACPI_TABLES);
81 }
82
83 if (acpi_hw_get_mode() == ACPI_SYS_MODE_ACPI) {
84 ACPI_DEBUG_PRINT ((ACPI_DB_INIT, "System is already in ACPI mode\n"));
85 }
86 else {
87 /* Transition to ACPI mode */
88
89 status = acpi_hw_set_mode (ACPI_SYS_MODE_ACPI);
90 if (ACPI_FAILURE (status)) {
91 ACPI_REPORT_ERROR (("Could not transition to ACPI mode.\n"));
92 return_ACPI_STATUS (status);
93 }
94
44f6c012
RM
95 ACPI_DEBUG_PRINT ((ACPI_DB_INIT,
96 "Transition to ACPI mode successful\n"));
1da177e4
LT
97 }
98
99 return_ACPI_STATUS (status);
100}
101
102
103/*******************************************************************************
104 *
105 * FUNCTION: acpi_disable
106 *
107 * PARAMETERS: None
108 *
109 * RETURN: Status
110 *
44f6c012 111 * DESCRIPTION: Transfers the system into LEGACY (non-ACPI) mode.
1da177e4
LT
112 *
113 ******************************************************************************/
114
115acpi_status
44f6c012
RM
116acpi_disable (
117 void)
1da177e4
LT
118{
119 acpi_status status = AE_OK;
120
121
122 ACPI_FUNCTION_TRACE ("acpi_disable");
123
124
125 if (!acpi_gbl_FADT) {
126 ACPI_DEBUG_PRINT ((ACPI_DB_WARN, "No FADT information present!\n"));
127 return_ACPI_STATUS (AE_NO_ACPI_TABLES);
128 }
129
130 if (acpi_hw_get_mode() == ACPI_SYS_MODE_LEGACY) {
44f6c012
RM
131 ACPI_DEBUG_PRINT ((ACPI_DB_INIT,
132 "System is already in legacy (non-ACPI) mode\n"));
1da177e4
LT
133 }
134 else {
135 /* Transition to LEGACY mode */
136
137 status = acpi_hw_set_mode (ACPI_SYS_MODE_LEGACY);
138
139 if (ACPI_FAILURE (status)) {
44f6c012
RM
140 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
141 "Could not exit ACPI mode to legacy mode"));
1da177e4
LT
142 return_ACPI_STATUS (status);
143 }
144
145 ACPI_DEBUG_PRINT ((ACPI_DB_INIT, "ACPI mode disabled\n"));
146 }
147
148 return_ACPI_STATUS (status);
149}
150
151
152/*******************************************************************************
153 *
154 * FUNCTION: acpi_enable_event
155 *
156 * PARAMETERS: Event - The fixed eventto be enabled
157 * Flags - Reserved
158 *
159 * RETURN: Status
160 *
161 * DESCRIPTION: Enable an ACPI event (fixed)
162 *
163 ******************************************************************************/
164
165acpi_status
166acpi_enable_event (
167 u32 event,
168 u32 flags)
169{
170 acpi_status status = AE_OK;
171 u32 value;
172
173
174 ACPI_FUNCTION_TRACE ("acpi_enable_event");
175
176
177 /* Decode the Fixed Event */
178
179 if (event > ACPI_EVENT_MAX) {
180 return_ACPI_STATUS (AE_BAD_PARAMETER);
181 }
182
183 /*
184 * Enable the requested fixed event (by writing a one to the
185 * enable register bit)
186 */
187 status = acpi_set_register (acpi_gbl_fixed_event_info[event].enable_register_id,
188 1, ACPI_MTX_LOCK);
189 if (ACPI_FAILURE (status)) {
190 return_ACPI_STATUS (status);
191 }
192
193 /* Make sure that the hardware responded */
194
195 status = acpi_get_register (acpi_gbl_fixed_event_info[event].enable_register_id,
196 &value, ACPI_MTX_LOCK);
197 if (ACPI_FAILURE (status)) {
198 return_ACPI_STATUS (status);
199 }
200
201 if (value != 1) {
202 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
203 "Could not enable %s event\n", acpi_ut_get_event_name (event)));
204 return_ACPI_STATUS (AE_NO_HARDWARE_RESPONSE);
205 }
206
207 return_ACPI_STATUS (status);
208}
209EXPORT_SYMBOL(acpi_enable_event);
210
211
212/*******************************************************************************
213 *
214 * FUNCTION: acpi_set_gpe_type
215 *
216 * PARAMETERS: gpe_device - Parent GPE Device
217 * gpe_number - GPE level within the GPE block
218 * Type - New GPE type
219 *
220 * RETURN: Status
221 *
44f6c012 222 * DESCRIPTION: Set the type of an individual GPE
1da177e4
LT
223 *
224 ******************************************************************************/
225
226acpi_status
227acpi_set_gpe_type (
228 acpi_handle gpe_device,
229 u32 gpe_number,
230 u8 type)
231{
232 acpi_status status = AE_OK;
233 struct acpi_gpe_event_info *gpe_event_info;
234
235
236 ACPI_FUNCTION_TRACE ("acpi_set_gpe_type");
237
238
239 /* Ensure that we have a valid GPE number */
240
241 gpe_event_info = acpi_ev_get_gpe_event_info (gpe_device, gpe_number);
242 if (!gpe_event_info) {
243 status = AE_BAD_PARAMETER;
244 goto unlock_and_exit;
245 }
246
247 if ((gpe_event_info->flags & ACPI_GPE_TYPE_MASK) == type) {
248 return_ACPI_STATUS (AE_OK);
249 }
250
251 /* Set the new type (will disable GPE if currently enabled) */
252
253 status = acpi_ev_set_gpe_type (gpe_event_info, type);
254
255unlock_and_exit:
256 return_ACPI_STATUS (status);
257}
258EXPORT_SYMBOL(acpi_set_gpe_type);
259
260
261/*******************************************************************************
262 *
263 * FUNCTION: acpi_enable_gpe
264 *
265 * PARAMETERS: gpe_device - Parent GPE Device
266 * gpe_number - GPE level within the GPE block
267 * Flags - Just enable, or also wake enable?
268 * Called from ISR or not
269 *
270 * RETURN: Status
271 *
272 * DESCRIPTION: Enable an ACPI event (general purpose)
273 *
274 ******************************************************************************/
275
276acpi_status
277acpi_enable_gpe (
278 acpi_handle gpe_device,
279 u32 gpe_number,
280 u32 flags)
281{
282 acpi_status status = AE_OK;
283 struct acpi_gpe_event_info *gpe_event_info;
284
285
286 ACPI_FUNCTION_TRACE ("acpi_enable_gpe");
287
288
289 /* Use semaphore lock if not executing at interrupt level */
290
291 if (flags & ACPI_NOT_ISR) {
292 status = acpi_ut_acquire_mutex (ACPI_MTX_EVENTS);
293 if (ACPI_FAILURE (status)) {
294 return_ACPI_STATUS (status);
295 }
296 }
297
298 /* Ensure that we have a valid GPE number */
299
300 gpe_event_info = acpi_ev_get_gpe_event_info (gpe_device, gpe_number);
301 if (!gpe_event_info) {
302 status = AE_BAD_PARAMETER;
303 goto unlock_and_exit;
304 }
305
306 /* Perform the enable */
307
308 status = acpi_ev_enable_gpe (gpe_event_info, TRUE);
309
310unlock_and_exit:
311 if (flags & ACPI_NOT_ISR) {
312 (void) acpi_ut_release_mutex (ACPI_MTX_EVENTS);
313 }
314 return_ACPI_STATUS (status);
315}
316EXPORT_SYMBOL(acpi_enable_gpe);
317
318
319/*******************************************************************************
320 *
321 * FUNCTION: acpi_disable_gpe
322 *
323 * PARAMETERS: gpe_device - Parent GPE Device
324 * gpe_number - GPE level within the GPE block
325 * Flags - Just disable, or also wake disable?
326 * Called from ISR or not
327 *
328 * RETURN: Status
329 *
330 * DESCRIPTION: Disable an ACPI event (general purpose)
331 *
332 ******************************************************************************/
333
334acpi_status
335acpi_disable_gpe (
336 acpi_handle gpe_device,
337 u32 gpe_number,
338 u32 flags)
339{
340 acpi_status status = AE_OK;
341 struct acpi_gpe_event_info *gpe_event_info;
342
343
344 ACPI_FUNCTION_TRACE ("acpi_disable_gpe");
345
346
347 /* Use semaphore lock if not executing at interrupt level */
348
349 if (flags & ACPI_NOT_ISR) {
350 status = acpi_ut_acquire_mutex (ACPI_MTX_EVENTS);
351 if (ACPI_FAILURE (status)) {
352 return_ACPI_STATUS (status);
353 }
354 }
355
356 /* Ensure that we have a valid GPE number */
357
358 gpe_event_info = acpi_ev_get_gpe_event_info (gpe_device, gpe_number);
359 if (!gpe_event_info) {
360 status = AE_BAD_PARAMETER;
361 goto unlock_and_exit;
362 }
363
364 status = acpi_ev_disable_gpe (gpe_event_info);
365
366unlock_and_exit:
367 if (flags & ACPI_NOT_ISR) {
368 (void) acpi_ut_release_mutex (ACPI_MTX_EVENTS);
369 }
370 return_ACPI_STATUS (status);
371}
372
373
374/*******************************************************************************
375 *
376 * FUNCTION: acpi_disable_event
377 *
378 * PARAMETERS: Event - The fixed eventto be enabled
379 * Flags - Reserved
380 *
381 * RETURN: Status
382 *
383 * DESCRIPTION: Disable an ACPI event (fixed)
384 *
385 ******************************************************************************/
386
387acpi_status
388acpi_disable_event (
389 u32 event,
390 u32 flags)
391{
392 acpi_status status = AE_OK;
393 u32 value;
394
395
396 ACPI_FUNCTION_TRACE ("acpi_disable_event");
397
398
399 /* Decode the Fixed Event */
400
401 if (event > ACPI_EVENT_MAX) {
402 return_ACPI_STATUS (AE_BAD_PARAMETER);
403 }
404
405 /*
406 * Disable the requested fixed event (by writing a zero to the
407 * enable register bit)
408 */
409 status = acpi_set_register (acpi_gbl_fixed_event_info[event].enable_register_id,
410 0, ACPI_MTX_LOCK);
411 if (ACPI_FAILURE (status)) {
412 return_ACPI_STATUS (status);
413 }
414
415 status = acpi_get_register (acpi_gbl_fixed_event_info[event].enable_register_id,
416 &value, ACPI_MTX_LOCK);
417 if (ACPI_FAILURE (status)) {
418 return_ACPI_STATUS (status);
419 }
420
421 if (value != 0) {
422 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
423 "Could not disable %s events\n", acpi_ut_get_event_name (event)));
424 return_ACPI_STATUS (AE_NO_HARDWARE_RESPONSE);
425 }
426
427 return_ACPI_STATUS (status);
428}
429EXPORT_SYMBOL(acpi_disable_event);
430
431
432/*******************************************************************************
433 *
434 * FUNCTION: acpi_clear_event
435 *
436 * PARAMETERS: Event - The fixed event to be cleared
437 *
438 * RETURN: Status
439 *
440 * DESCRIPTION: Clear an ACPI event (fixed)
441 *
442 ******************************************************************************/
443
444acpi_status
445acpi_clear_event (
446 u32 event)
447{
448 acpi_status status = AE_OK;
449
450
451 ACPI_FUNCTION_TRACE ("acpi_clear_event");
452
453
454 /* Decode the Fixed Event */
455
456 if (event > ACPI_EVENT_MAX) {
457 return_ACPI_STATUS (AE_BAD_PARAMETER);
458 }
459
460 /*
461 * Clear the requested fixed event (By writing a one to the
462 * status register bit)
463 */
464 status = acpi_set_register (acpi_gbl_fixed_event_info[event].status_register_id,
465 1, ACPI_MTX_LOCK);
466
467 return_ACPI_STATUS (status);
468}
469EXPORT_SYMBOL(acpi_clear_event);
470
471
472/*******************************************************************************
473 *
474 * FUNCTION: acpi_clear_gpe
475 *
476 * PARAMETERS: gpe_device - Parent GPE Device
477 * gpe_number - GPE level within the GPE block
478 * Flags - Called from an ISR or not
479 *
480 * RETURN: Status
481 *
482 * DESCRIPTION: Clear an ACPI event (general purpose)
483 *
484 ******************************************************************************/
485
486acpi_status
487acpi_clear_gpe (
488 acpi_handle gpe_device,
489 u32 gpe_number,
490 u32 flags)
491{
492 acpi_status status = AE_OK;
493 struct acpi_gpe_event_info *gpe_event_info;
494
495
496 ACPI_FUNCTION_TRACE ("acpi_clear_gpe");
497
498
499 /* Use semaphore lock if not executing at interrupt level */
500
501 if (flags & ACPI_NOT_ISR) {
502 status = acpi_ut_acquire_mutex (ACPI_MTX_EVENTS);
503 if (ACPI_FAILURE (status)) {
504 return_ACPI_STATUS (status);
505 }
506 }
507
508 /* Ensure that we have a valid GPE number */
509
510 gpe_event_info = acpi_ev_get_gpe_event_info (gpe_device, gpe_number);
511 if (!gpe_event_info) {
512 status = AE_BAD_PARAMETER;
513 goto unlock_and_exit;
514 }
515
516 status = acpi_hw_clear_gpe (gpe_event_info);
517
518unlock_and_exit:
519 if (flags & ACPI_NOT_ISR) {
520 (void) acpi_ut_release_mutex (ACPI_MTX_EVENTS);
521 }
522 return_ACPI_STATUS (status);
523}
524
525
526#ifdef ACPI_FUTURE_USAGE
1da177e4
LT
527/*******************************************************************************
528 *
529 * FUNCTION: acpi_get_event_status
530 *
531 * PARAMETERS: Event - The fixed event
44f6c012 532 * event_status - Where the current status of the event will
1da177e4
LT
533 * be returned
534 *
535 * RETURN: Status
536 *
537 * DESCRIPTION: Obtains and returns the current status of the event
538 *
539 ******************************************************************************/
540
541acpi_status
542acpi_get_event_status (
543 u32 event,
544 acpi_event_status *event_status)
545{
546 acpi_status status = AE_OK;
547
548
549 ACPI_FUNCTION_TRACE ("acpi_get_event_status");
550
551
552 if (!event_status) {
553 return_ACPI_STATUS (AE_BAD_PARAMETER);
554 }
555
556 /* Decode the Fixed Event */
557
558 if (event > ACPI_EVENT_MAX) {
559 return_ACPI_STATUS (AE_BAD_PARAMETER);
560 }
561
562 /* Get the status of the requested fixed event */
563
564 status = acpi_get_register (acpi_gbl_fixed_event_info[event].status_register_id,
565 event_status, ACPI_MTX_LOCK);
566
567 return_ACPI_STATUS (status);
568}
569
570
571/*******************************************************************************
572 *
573 * FUNCTION: acpi_get_gpe_status
574 *
575 * PARAMETERS: gpe_device - Parent GPE Device
576 * gpe_number - GPE level within the GPE block
577 * Flags - Called from an ISR or not
44f6c012 578 * event_status - Where the current status of the event will
1da177e4
LT
579 * be returned
580 *
581 * RETURN: Status
582 *
583 * DESCRIPTION: Get status of an event (general purpose)
584 *
585 ******************************************************************************/
586
587acpi_status
588acpi_get_gpe_status (
589 acpi_handle gpe_device,
590 u32 gpe_number,
591 u32 flags,
592 acpi_event_status *event_status)
593{
594 acpi_status status = AE_OK;
595 struct acpi_gpe_event_info *gpe_event_info;
596
597
598 ACPI_FUNCTION_TRACE ("acpi_get_gpe_status");
599
600
601 /* Use semaphore lock if not executing at interrupt level */
602
603 if (flags & ACPI_NOT_ISR) {
604 status = acpi_ut_acquire_mutex (ACPI_MTX_EVENTS);
605 if (ACPI_FAILURE (status)) {
606 return_ACPI_STATUS (status);
607 }
608 }
609
610 /* Ensure that we have a valid GPE number */
611
612 gpe_event_info = acpi_ev_get_gpe_event_info (gpe_device, gpe_number);
613 if (!gpe_event_info) {
614 status = AE_BAD_PARAMETER;
615 goto unlock_and_exit;
616 }
617
618 /* Obtain status on the requested GPE number */
619
620 status = acpi_hw_get_gpe_status (gpe_event_info, event_status);
621
622unlock_and_exit:
623 if (flags & ACPI_NOT_ISR) {
624 (void) acpi_ut_release_mutex (ACPI_MTX_EVENTS);
625 }
626 return_ACPI_STATUS (status);
627}
628#endif /* ACPI_FUTURE_USAGE */
629
630
631/*******************************************************************************
632 *
633 * FUNCTION: acpi_install_gpe_block
634 *
635 * PARAMETERS: gpe_device - Handle to the parent GPE Block Device
636 * gpe_block_address - Address and space_iD
637 * register_count - Number of GPE register pairs in the block
638 * interrupt_level - H/W interrupt for the block
639 *
640 * RETURN: Status
641 *
642 * DESCRIPTION: Create and Install a block of GPE registers
643 *
644 ******************************************************************************/
645
646acpi_status
647acpi_install_gpe_block (
648 acpi_handle gpe_device,
649 struct acpi_generic_address *gpe_block_address,
650 u32 register_count,
651 u32 interrupt_level)
652{
653 acpi_status status;
654 union acpi_operand_object *obj_desc;
655 struct acpi_namespace_node *node;
656 struct acpi_gpe_block_info *gpe_block;
657
658
659 ACPI_FUNCTION_TRACE ("acpi_install_gpe_block");
660
661
662 if ((!gpe_device) ||
663 (!gpe_block_address) ||
664 (!register_count)) {
665 return_ACPI_STATUS (AE_BAD_PARAMETER);
666 }
667
668 status = acpi_ut_acquire_mutex (ACPI_MTX_NAMESPACE);
669 if (ACPI_FAILURE (status)) {
670 return (status);
671 }
672
673 node = acpi_ns_map_handle_to_node (gpe_device);
674 if (!node) {
675 status = AE_BAD_PARAMETER;
676 goto unlock_and_exit;
677 }
678
679 /*
680 * For user-installed GPE Block Devices, the gpe_block_base_number
681 * is always zero
682 */
683 status = acpi_ev_create_gpe_block (node, gpe_block_address, register_count,
684 0, interrupt_level, &gpe_block);
685 if (ACPI_FAILURE (status)) {
686 goto unlock_and_exit;
687 }
688
689 /* Get the device_object attached to the node */
690
691 obj_desc = acpi_ns_get_attached_object (node);
692 if (!obj_desc) {
693 /* No object, create a new one */
694
695 obj_desc = acpi_ut_create_internal_object (ACPI_TYPE_DEVICE);
696 if (!obj_desc) {
697 status = AE_NO_MEMORY;
698 goto unlock_and_exit;
699 }
700
701 status = acpi_ns_attach_object (node, obj_desc, ACPI_TYPE_DEVICE);
702
703 /* Remove local reference to the object */
704
705 acpi_ut_remove_reference (obj_desc);
706
707 if (ACPI_FAILURE (status)) {
708 goto unlock_and_exit;
709 }
710 }
711
712 /* Install the GPE block in the device_object */
713
714 obj_desc->device.gpe_block = gpe_block;
715
716
717unlock_and_exit:
718 (void) acpi_ut_release_mutex (ACPI_MTX_NAMESPACE);
719 return_ACPI_STATUS (status);
720}
721EXPORT_SYMBOL(acpi_install_gpe_block);
722
723
724/*******************************************************************************
725 *
726 * FUNCTION: acpi_remove_gpe_block
727 *
728 * PARAMETERS: gpe_device - Handle to the parent GPE Block Device
729 *
730 * RETURN: Status
731 *
732 * DESCRIPTION: Remove a previously installed block of GPE registers
733 *
734 ******************************************************************************/
735
736acpi_status
737acpi_remove_gpe_block (
738 acpi_handle gpe_device)
739{
740 union acpi_operand_object *obj_desc;
741 acpi_status status;
742 struct acpi_namespace_node *node;
743
744
745 ACPI_FUNCTION_TRACE ("acpi_remove_gpe_block");
746
747
748 if (!gpe_device) {
749 return_ACPI_STATUS (AE_BAD_PARAMETER);
750 }
751
752 status = acpi_ut_acquire_mutex (ACPI_MTX_NAMESPACE);
753 if (ACPI_FAILURE (status)) {
754 return (status);
755 }
756
757 node = acpi_ns_map_handle_to_node (gpe_device);
758 if (!node) {
759 status = AE_BAD_PARAMETER;
760 goto unlock_and_exit;
761 }
762
763 /* Get the device_object attached to the node */
764
765 obj_desc = acpi_ns_get_attached_object (node);
766 if (!obj_desc ||
767 !obj_desc->device.gpe_block) {
768 return_ACPI_STATUS (AE_NULL_OBJECT);
769 }
770
771 /* Delete the GPE block (but not the device_object) */
772
773 status = acpi_ev_delete_gpe_block (obj_desc->device.gpe_block);
774 if (ACPI_SUCCESS (status)) {
775 obj_desc->device.gpe_block = NULL;
776 }
777
778unlock_and_exit:
779 (void) acpi_ut_release_mutex (ACPI_MTX_NAMESPACE);
780 return_ACPI_STATUS (status);
781}
44f6c012 782
1da177e4 783EXPORT_SYMBOL(acpi_remove_gpe_block);
This page took 0.068984 seconds and 5 git commands to generate.