Commit | Line | Data |
---|---|---|
421b20b9 JG |
1 | # |
2 | # SATA/PATA driver configuration | |
3 | # | |
4 | ||
b196fc69 | 5 | menuconfig ATA |
097dac91 | 6 | tristate "Serial ATA and Parallel ATA drivers" |
e25df120 | 7 | depends on HAS_IOMEM |
bf2d401b | 8 | depends on BLOCK |
9317fd4c | 9 | depends on !(M32R || M68K) || BROKEN |
81ce3c4b | 10 | select SCSI |
c6fd2807 JG |
11 | ---help--- |
12 | If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or | |
13 | any other ATA device under Linux, say Y and make sure that you know | |
14 | the name of your ATA host adapter (the card inside your computer | |
15 | that "speaks" the ATA protocol, also called ATA controller), | |
16 | because you will be asked for it. | |
17 | ||
abcdceb9 RD |
18 | NOTE: ATA enables basic SCSI support; *however*, |
19 | 'SCSI disk support', 'SCSI tape support', or | |
20 | 'SCSI CDROM support' may also be needed, | |
21 | depending on your hardware configuration. | |
22 | ||
81ce3c4b JG |
23 | if ATA |
24 | ||
8cdf92a9 DW |
25 | config ATA_NONSTANDARD |
26 | bool | |
27 | default n | |
28 | ||
6521148c RH |
29 | config ATA_VERBOSE_ERROR |
30 | bool "Verbose ATA error reporting" | |
31 | default y | |
32 | help | |
33 | This option adds parsing of ATA command descriptions and error bits | |
34 | in libata kernel output, making it easier to interpret. | |
35 | This option will enlarge the kernel by approx. 6KB. Disable it only | |
36 | if kernel size is more important than ease of debugging. | |
37 | ||
38 | If unsure, say Y. | |
39 | ||
e92351bb | 40 | config ATA_ACPI |
c30484d7 | 41 | bool "ATA ACPI Support" |
e92351bb TH |
42 | depends on ACPI && PCI |
43 | default y | |
44 | help | |
45 | This option adds support for ATA-related ACPI objects. | |
46 | These ACPI objects add the ability to retrieve taskfiles | |
47 | from the ACPI BIOS and write them to the disk controller. | |
48 | These objects may be related to performance, security, | |
49 | power management, or other areas. | |
50 | You can disable this at kernel boot time by using the | |
51 | option libata.noacpi=1 | |
52 | ||
88fcd562 TH |
53 | config SATA_PMP |
54 | bool "SATA Port Multiplier support" | |
55 | default y | |
56 | help | |
f3360ebf JG |
57 | This option adds support for SATA Port Multipliers |
58 | (the SATA version of an ethernet hub, or SAS expander). | |
88fcd562 | 59 | |
8ad92ba7 | 60 | config SATA_AHCI |
c6fd2807 | 61 | tristate "AHCI SATA support" |
81ce3c4b | 62 | depends on PCI |
c6fd2807 JG |
63 | help |
64 | This option enables support for AHCI Serial ATA. | |
65 | ||
66 | If unsure, say N. | |
67 | ||
127102ae TH |
68 | config SATA_SIL24 |
69 | tristate "Silicon Image 3124/3132 SATA support" | |
70 | depends on PCI | |
71 | help | |
72 | This option enables support for Silicon Image 3124/3132 Serial ATA. | |
73 | ||
74 | If unsure, say N. | |
75 | ||
76 | config SATA_FSL | |
77 | tristate "Freescale 3.0Gbps SATA support" | |
78 | depends on FSL_SOC | |
79 | help | |
80 | This option enables support for Freescale 3.0Gbps SATA controller. | |
81 | It can be found on MPC837x and MPC8315. | |
82 | ||
83 | If unsure, say N. | |
84 | ||
85 | config ATA_SFF | |
86 | bool "ATA SFF support" | |
87 | default y | |
88 | help | |
89 | This option adds support for ATA controllers with SFF | |
90 | compliant or similar programming interface. | |
91 | ||
f3360ebf JG |
92 | SFF is the legacy IDE interface that has been around since |
93 | the dawn of time. Almost all PATA controllers have an | |
94 | SFF interface. Many SATA controllers have an SFF interface | |
95 | when configured into a legacy compatibility mode. | |
96 | ||
97 | For users with exclusively modern controllers like AHCI, | |
98 | Silicon Image 3124, or Marvell 6440, you may choose to | |
692105b8 | 99 | disable this unneeded SFF support. |
f3360ebf JG |
100 | |
101 | If unsure, say Y. | |
102 | ||
127102ae TH |
103 | if ATA_SFF |
104 | ||
8ad92ba7 | 105 | config SATA_SVW |
c6fd2807 | 106 | tristate "ServerWorks Frodo / Apple K2 SATA support" |
81ce3c4b | 107 | depends on PCI |
c6fd2807 JG |
108 | help |
109 | This option enables support for Broadcom/Serverworks/Apple K2 | |
110 | SATA support. | |
111 | ||
112 | If unsure, say N. | |
113 | ||
8ad92ba7 | 114 | config ATA_PIIX |
2c7620d5 | 115 | tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support" |
81ce3c4b | 116 | depends on PCI |
c6fd2807 | 117 | help |
2bfc3611 | 118 | This option enables support for ICH5/6/7/8 Serial ATA |
2c7620d5 A |
119 | and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series |
120 | host controllers. | |
c6fd2807 JG |
121 | |
122 | If unsure, say N. | |
123 | ||
8ad92ba7 | 124 | config SATA_MV |
f9228c7f | 125 | tristate "Marvell SATA support" |
c6fd2807 JG |
126 | help |
127 | This option enables support for the Marvell Serial ATA family. | |
f9228c7f ML |
128 | Currently supports 88SX[56]0[48][01] PCI(-X) chips, |
129 | as well as the newer [67]042 PCI-X/PCIe and SOC devices. | |
c6fd2807 JG |
130 | |
131 | If unsure, say N. | |
132 | ||
8ad92ba7 | 133 | config SATA_NV |
c6fd2807 | 134 | tristate "NVIDIA SATA support" |
81ce3c4b | 135 | depends on PCI |
c6fd2807 JG |
136 | help |
137 | This option enables support for NVIDIA Serial ATA. | |
138 | ||
139 | If unsure, say N. | |
140 | ||
8ad92ba7 | 141 | config PDC_ADMA |
c6fd2807 | 142 | tristate "Pacific Digital ADMA support" |
81ce3c4b | 143 | depends on PCI |
c6fd2807 JG |
144 | help |
145 | This option enables support for Pacific Digital ADMA controllers | |
146 | ||
147 | If unsure, say N. | |
148 | ||
8ad92ba7 | 149 | config SATA_QSTOR |
c6fd2807 | 150 | tristate "Pacific Digital SATA QStor support" |
81ce3c4b | 151 | depends on PCI |
c6fd2807 JG |
152 | help |
153 | This option enables support for Pacific Digital Serial ATA QStor. | |
154 | ||
155 | If unsure, say N. | |
156 | ||
8ad92ba7 | 157 | config SATA_PROMISE |
c6fd2807 | 158 | tristate "Promise SATA TX2/TX4 support" |
81ce3c4b | 159 | depends on PCI |
c6fd2807 JG |
160 | help |
161 | This option enables support for Promise Serial ATA TX2/TX4. | |
162 | ||
163 | If unsure, say N. | |
164 | ||
8ad92ba7 | 165 | config SATA_SX4 |
e3389cbc | 166 | tristate "Promise SATA SX4 support (Experimental)" |
81ce3c4b | 167 | depends on PCI && EXPERIMENTAL |
c6fd2807 JG |
168 | help |
169 | This option enables support for Promise Serial ATA SX4. | |
170 | ||
171 | If unsure, say N. | |
172 | ||
8ad92ba7 | 173 | config SATA_SIL |
c6fd2807 | 174 | tristate "Silicon Image SATA support" |
81ce3c4b | 175 | depends on PCI |
c6fd2807 JG |
176 | help |
177 | This option enables support for Silicon Image Serial ATA. | |
178 | ||
179 | If unsure, say N. | |
180 | ||
8ad92ba7 | 181 | config SATA_SIS |
9b14dec5 | 182 | tristate "SiS 964/965/966/180 SATA support" |
81ce3c4b | 183 | depends on PCI |
9b14dec5 | 184 | select PATA_SIS |
c6fd2807 | 185 | help |
a617c09f | 186 | This option enables support for SiS Serial ATA on |
9b14dec5 A |
187 | SiS 964/965/966/180 and Parallel ATA on SiS 180. |
188 | The PATA support for SiS 180 requires additionally to | |
189 | enable the PATA_SIS driver in the config. | |
c6fd2807 JG |
190 | If unsure, say N. |
191 | ||
8ad92ba7 | 192 | config SATA_ULI |
c6fd2807 | 193 | tristate "ULi Electronics SATA support" |
81ce3c4b | 194 | depends on PCI |
c6fd2807 JG |
195 | help |
196 | This option enables support for ULi Electronics SATA. | |
197 | ||
198 | If unsure, say N. | |
199 | ||
8ad92ba7 | 200 | config SATA_VIA |
c6fd2807 | 201 | tristate "VIA SATA support" |
81ce3c4b | 202 | depends on PCI |
c6fd2807 JG |
203 | help |
204 | This option enables support for VIA Serial ATA. | |
205 | ||
206 | If unsure, say N. | |
207 | ||
8ad92ba7 | 208 | config SATA_VITESSE |
c6fd2807 | 209 | tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" |
81ce3c4b | 210 | depends on PCI |
c6fd2807 JG |
211 | help |
212 | This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. | |
213 | ||
214 | If unsure, say N. | |
215 | ||
1fd7a697 | 216 | config SATA_INIC162X |
22bfc6d5 TH |
217 | tristate "Initio 162x SATA support" |
218 | depends on PCI | |
1fd7a697 TH |
219 | help |
220 | This option enables support for Initio 162x Serial ATA. | |
221 | ||
025621f9 AC |
222 | config PATA_ACPI |
223 | tristate "ACPI firmware driver for PATA" | |
224 | depends on ATA_ACPI | |
225 | help | |
226 | This option enables an ACPI method driver which drives | |
227 | motherboard PATA controller interfaces through the ACPI | |
228 | firmware in the BIOS. This driver can sometimes handle | |
229 | otherwise unsupported hardware. | |
230 | ||
669a5db4 | 231 | config PATA_ALI |
e3389cbc AC |
232 | tristate "ALi PATA support" |
233 | depends on PCI | |
669a5db4 JG |
234 | help |
235 | This option enables support for the ALi ATA interfaces | |
236 | found on the many ALi chipsets. | |
237 | ||
238 | If unsure, say N. | |
239 | ||
240 | config PATA_AMD | |
942d0947 | 241 | tristate "AMD/NVidia PATA support" |
669a5db4 JG |
242 | depends on PCI |
243 | help | |
244 | This option enables support for the AMD and NVidia PATA | |
245 | interfaces found on the chipsets for Athlon/Athlon64. | |
246 | ||
247 | If unsure, say N. | |
248 | ||
249 | config PATA_ARTOP | |
c645fd34 AC |
250 | tristate "ARTOP 6210/6260 PATA support" |
251 | depends on PCI | |
669a5db4 JG |
252 | help |
253 | This option enables support for ARTOP PATA controllers. | |
254 | ||
255 | If unsure, say N. | |
256 | ||
d15d6e6c JJIL |
257 | config PATA_ATP867X |
258 | tristate "ARTOP/Acard ATP867X PATA support" | |
259 | depends on PCI | |
260 | help | |
261 | This option enables support for ARTOP/Acard ATP867X PATA | |
262 | controllers. | |
263 | ||
264 | If unsure, say N. | |
265 | ||
7c9ef8e4 KNG |
266 | config PATA_AT32 |
267 | tristate "Atmel AVR32 PATA support (Experimental)" | |
268 | depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL | |
269 | help | |
270 | This option enables support for the IDE devices on the | |
271 | Atmel AT32AP platform. | |
272 | ||
273 | If unsure, say N. | |
274 | ||
669a5db4 | 275 | config PATA_ATIIXP |
c645fd34 AC |
276 | tristate "ATI PATA support" |
277 | depends on PCI | |
669a5db4 JG |
278 | help |
279 | This option enables support for the ATI ATA interfaces | |
280 | found on the many ATI chipsets. | |
281 | ||
282 | If unsure, say N. | |
283 | ||
b2248dac | 284 | config PATA_CMD640_PCI |
e3389cbc | 285 | tristate "CMD640 PCI PATA support (Experimental)" |
b2248dac AC |
286 | depends on PCI && EXPERIMENTAL |
287 | help | |
288 | This option enables support for the CMD640 PCI IDE | |
289 | interface chip. Only the primary channel is currently | |
290 | supported. | |
291 | ||
292 | If unsure, say N. | |
293 | ||
669a5db4 | 294 | config PATA_CMD64X |
c645fd34 AC |
295 | tristate "CMD64x PATA support" |
296 | depends on PCI | |
669a5db4 JG |
297 | help |
298 | This option enables support for the CMD64x series chips | |
299 | except for the CMD640. | |
300 | ||
301 | If unsure, say N. | |
302 | ||
303 | config PATA_CS5520 | |
304 | tristate "CS5510/5520 PATA support" | |
305 | depends on PCI | |
306 | help | |
307 | This option enables support for the Cyrix 5510/5520 | |
308 | companion chip used with the MediaGX/Geode processor family. | |
309 | ||
310 | If unsure, say N. | |
311 | ||
312 | config PATA_CS5530 | |
e3389cbc AC |
313 | tristate "CS5530 PATA support" |
314 | depends on PCI | |
669a5db4 JG |
315 | help |
316 | This option enables support for the Cyrix/NatSemi/AMD CS5530 | |
317 | companion chip used with the MediaGX/Geode processor family. | |
318 | ||
319 | If unsure, say N. | |
320 | ||
321 | config PATA_CS5535 | |
322 | tristate "CS5535 PATA support (Experimental)" | |
323 | depends on PCI && X86 && !X86_64 && EXPERIMENTAL | |
324 | help | |
325 | This option enables support for the NatSemi/AMD CS5535 | |
326 | companion chip used with the Geode processor family. | |
327 | ||
328 | If unsure, say N. | |
329 | ||
3957df61 | 330 | config PATA_CS5536 |
e3389cbc AC |
331 | tristate "CS5536 PATA support" |
332 | depends on PCI && X86 && !X86_64 | |
3957df61 MP |
333 | help |
334 | This option enables support for the AMD CS5536 | |
335 | companion chip used with the Geode LX processor family. | |
336 | ||
337 | If unsure, say N. | |
338 | ||
669a5db4 JG |
339 | config PATA_CYPRESS |
340 | tristate "Cypress CY82C693 PATA support (Very Experimental)" | |
341 | depends on PCI && EXPERIMENTAL | |
342 | help | |
343 | This option enables support for the Cypress/Contaq CY82C693 | |
344 | chipset found in some Alpha systems | |
345 | ||
346 | If unsure, say N. | |
347 | ||
348 | config PATA_EFAR | |
349 | tristate "EFAR SLC90E66 support" | |
350 | depends on PCI | |
351 | help | |
352 | This option enables support for the EFAR SLC90E66 | |
353 | IDE controller found on some older machines. | |
354 | ||
355 | If unsure, say N. | |
356 | ||
357 | config ATA_GENERIC | |
358 | tristate "Generic ATA support" | |
359 | depends on PCI | |
360 | help | |
361 | This option enables support for generic BIOS configured | |
362 | ATA controllers via the new ATA layer | |
363 | ||
364 | If unsure, say N. | |
365 | ||
366 | config PATA_HPT366 | |
c645fd34 AC |
367 | tristate "HPT 366/368 PATA support" |
368 | depends on PCI | |
669a5db4 JG |
369 | help |
370 | This option enables support for the HPT 366 and 368 | |
371 | PATA controllers via the new ATA layer. | |
372 | ||
373 | If unsure, say N. | |
374 | ||
375 | config PATA_HPT37X | |
be315d46 AC |
376 | tristate "HPT 370/370A/371/372/374/302 PATA support" |
377 | depends on PCI | |
669a5db4 JG |
378 | help |
379 | This option enables support for the majority of the later HPT | |
380 | PATA controllers via the new ATA layer. | |
381 | ||
382 | If unsure, say N. | |
383 | ||
384 | config PATA_HPT3X2N | |
be315d46 AC |
385 | tristate "HPT 372N/302N PATA support" |
386 | depends on PCI | |
669a5db4 JG |
387 | help |
388 | This option enables support for the N variant HPT PATA | |
389 | controllers via the new ATA layer | |
390 | ||
391 | If unsure, say N. | |
392 | ||
393 | config PATA_HPT3X3 | |
66e7da4e | 394 | tristate "HPT 343/363 PATA support" |
669a5db4 JG |
395 | depends on PCI |
396 | help | |
397 | This option enables support for the HPT 343/363 | |
398 | PATA controllers via the new ATA layer | |
399 | ||
400 | If unsure, say N. | |
401 | ||
66e7da4e | 402 | config PATA_HPT3X3_DMA |
be315d46 | 403 | bool "HPT 343/363 DMA support" |
66e7da4e AC |
404 | depends on PATA_HPT3X3 |
405 | help | |
406 | This option enables DMA support for the HPT343/363 | |
407 | controllers. Enable with care as there are still some | |
408 | problems with DMA on this chipset. | |
409 | ||
669a5db4 | 410 | config PATA_ISAPNP |
e3389cbc AC |
411 | tristate "ISA Plug and Play PATA support" |
412 | depends on ISAPNP | |
669a5db4 JG |
413 | help |
414 | This option enables support for ISA plug & play ATA | |
415 | controllers such as those found on old soundcards. | |
416 | ||
417 | If unsure, say N. | |
418 | ||
669a5db4 | 419 | config PATA_IT821X |
942d0947 AC |
420 | tristate "IT8211/2 PATA support" |
421 | depends on PCI | |
669a5db4 JG |
422 | help |
423 | This option enables support for the ITE 8211 and 8212 | |
424 | PATA controllers via the new ATA layer, including RAID | |
425 | mode. | |
426 | ||
427 | If unsure, say N. | |
428 | ||
9b13b682 A |
429 | config PATA_IT8213 |
430 | tristate "IT8213 PATA support (Experimental)" | |
431 | depends on PCI && EXPERIMENTAL | |
432 | help | |
433 | This option enables support for the ITE 821 PATA | |
434 | controllers via the new ATA layer. | |
435 | ||
436 | If unsure, say N. | |
437 | ||
406176ee JG |
438 | config PATA_JMICRON |
439 | tristate "JMicron PATA support" | |
440 | depends on PCI | |
441 | help | |
442 | Enable support for the JMicron IDE controller, via the new | |
443 | ATA layer. | |
444 | ||
445 | If unsure, say N. | |
446 | ||
669a5db4 JG |
447 | config PATA_LEGACY |
448 | tristate "Legacy ISA PATA support (Experimental)" | |
96780078 | 449 | depends on (ISA || PCI) && EXPERIMENTAL |
669a5db4 | 450 | help |
96780078 | 451 | This option enables support for ISA/VLB/PCI bus legacy PATA |
669a5db4 JG |
452 | ports and allows them to be accessed via the new ATA layer. |
453 | ||
454 | If unsure, say N. | |
455 | ||
456 | config PATA_TRIFLEX | |
457 | tristate "Compaq Triflex PATA support" | |
458 | depends on PCI | |
459 | help | |
460 | Enable support for the Compaq 'Triflex' IDE controller as found | |
461 | on many Compaq Pentium-Pro systems, via the new ATA layer. | |
462 | ||
463 | If unsure, say N. | |
464 | ||
75742cb4 AC |
465 | config PATA_MARVELL |
466 | tristate "Marvell PATA support via legacy mode" | |
467 | depends on PCI | |
468 | help | |
5b66c829 AC |
469 | This option enables limited support for the Marvell 88SE61xx ATA |
470 | controllers. If you wish to use only the SATA ports then select | |
471 | the AHCI driver alone. If you wish to the use the PATA port or | |
472 | both SATA and PATA include this driver. | |
75742cb4 AC |
473 | |
474 | If unsure, say N. | |
475 | ||
155d2916 SM |
476 | config PATA_MPC52xx |
477 | tristate "Freescale MPC52xx SoC internal IDE" | |
6b61e69e TY |
478 | depends on PPC_MPC52xx && PPC_BESTCOMM |
479 | select PPC_BESTCOMM_ATA | |
155d2916 SM |
480 | help |
481 | This option enables support for integrated IDE controller | |
482 | of the Freescale MPC52xx SoC. | |
483 | ||
484 | If unsure, say N. | |
485 | ||
669a5db4 JG |
486 | config PATA_MPIIX |
487 | tristate "Intel PATA MPIIX support" | |
488 | depends on PCI | |
489 | help | |
490 | This option enables support for MPIIX PATA support. | |
491 | ||
492 | If unsure, say N. | |
493 | ||
494 | config PATA_OLDPIIX | |
942d0947 AC |
495 | tristate "Intel PATA old PIIX support" |
496 | depends on PCI | |
669a5db4 | 497 | help |
942d0947 | 498 | This option enables support for early PIIX PATA support. |
669a5db4 JG |
499 | |
500 | If unsure, say N. | |
501 | ||
502 | config PATA_NETCELL | |
503 | tristate "NETCELL Revolution RAID support" | |
504 | depends on PCI | |
505 | help | |
506 | This option enables support for the Netcell Revolution RAID | |
507 | PATA controller. | |
508 | ||
509 | If unsure, say N. | |
510 | ||
51dbd490 | 511 | config PATA_NINJA32 |
be315d46 AC |
512 | tristate "Ninja32/Delkin Cardbus ATA support" |
513 | depends on PCI | |
51dbd490 AC |
514 | help |
515 | This option enables support for the Ninja32, Delkin and | |
516 | possibly other brands of Cardbus ATA adapter | |
517 | ||
518 | If unsure, say N. | |
519 | ||
669a5db4 | 520 | config PATA_NS87410 |
e3389cbc AC |
521 | tristate "Nat Semi NS87410 PATA support" |
522 | depends on PCI | |
669a5db4 JG |
523 | help |
524 | This option enables support for the National Semiconductor | |
525 | NS87410 PCI-IDE controller. | |
526 | ||
527 | If unsure, say N. | |
528 | ||
c4b5b7b6 | 529 | config PATA_NS87415 |
e3389cbc AC |
530 | tristate "Nat Semi NS87415 PATA support" |
531 | depends on PCI | |
c4b5b7b6 AC |
532 | help |
533 | This option enables support for the National Semiconductor | |
534 | NS87415 PCI-IDE controller. | |
535 | ||
536 | If unsure, say N. | |
537 | ||
669a5db4 JG |
538 | config PATA_OPTI |
539 | tristate "OPTI621/6215 PATA support (Very Experimental)" | |
540 | depends on PCI && EXPERIMENTAL | |
541 | help | |
542 | This option enables full PIO support for the early Opti ATA | |
543 | controllers found on some old motherboards. | |
544 | ||
545 | If unsure, say N. | |
546 | ||
547 | config PATA_OPTIDMA | |
516e72cb | 548 | tristate "OPTI FireStar PATA support (Very Experimental)" |
669a5db4 JG |
549 | depends on PCI && EXPERIMENTAL |
550 | help | |
551 | This option enables DMA/PIO support for the later OPTi | |
552 | controllers found on some old motherboards and in some | |
3dde6ad8 | 553 | laptops. |
669a5db4 JG |
554 | |
555 | If unsure, say N. | |
556 | ||
5a9d2515 MV |
557 | config PATA_PALMLD |
558 | tristate "Palm LifeDrive PATA support" | |
559 | depends on MACH_PALMLD | |
560 | help | |
561 | This option enables support for Palm LifeDrive's internal ATA | |
562 | port via the new ATA layer. | |
563 | ||
564 | If unsure, say N. | |
565 | ||
669a5db4 JG |
566 | config PATA_PCMCIA |
567 | tristate "PCMCIA PATA support" | |
568 | depends on PCMCIA | |
569 | help | |
570 | This option enables support for PCMCIA ATA interfaces, including | |
571 | compact flash card adapters via the new ATA layer. | |
572 | ||
573 | If unsure, say N. | |
574 | ||
be315d46 AC |
575 | config PATA_PDC2027X |
576 | tristate "Promise PATA 2027x support" | |
577 | depends on PCI | |
578 | help | |
579 | This option enables support for Promise PATA pdc20268 to pdc20277 host adapters. | |
580 | ||
581 | If unsure, say N. | |
582 | ||
669a5db4 | 583 | config PATA_PDC_OLD |
e3389cbc AC |
584 | tristate "Older Promise PATA controller support" |
585 | depends on PCI | |
669a5db4 JG |
586 | help |
587 | This option enables support for the Promise 20246, 20262, 20263, | |
588 | 20265 and 20267 adapters. | |
589 | ||
590 | If unsure, say N. | |
591 | ||
592 | config PATA_QDI | |
593 | tristate "QDI VLB PATA support" | |
4735ebed | 594 | depends on ISA |
669a5db4 JG |
595 | help |
596 | Support for QDI 6500 and 6580 PATA controllers on VESA local bus. | |
597 | ||
598 | config PATA_RADISYS | |
e3389cbc | 599 | tristate "RADISYS 82600 PATA support (Experimental)" |
669a5db4 JG |
600 | depends on PCI && EXPERIMENTAL |
601 | help | |
602 | This option enables support for the RADISYS 82600 | |
603 | PATA controllers via the new ATA layer | |
604 | ||
605 | If unsure, say N. | |
606 | ||
3dd654bf RB |
607 | config PATA_RB532 |
608 | tristate "RouterBoard 532 PATA CompactFlash support" | |
609 | depends on MIKROTIK_RB532 | |
3db691da | 610 | help |
3dd654bf | 611 | This option enables support for the RouterBoard 532 |
3db691da FF |
612 | PATA CompactFlash controller. |
613 | ||
614 | If unsure, say N. | |
615 | ||
6b406782 AC |
616 | config PATA_RDC |
617 | tristate "RDC PATA support" | |
618 | depends on PCI | |
619 | help | |
620 | This option enables basic support for the later RDC PATA controllers | |
621 | controllers via the new ATA layer. For the RDC 1010, you need to | |
622 | enable the IT821X driver instead. | |
623 | ||
624 | If unsure, say N. | |
625 | ||
669a5db4 JG |
626 | config PATA_RZ1000 |
627 | tristate "PC Tech RZ1000 PATA support" | |
628 | depends on PCI | |
629 | help | |
630 | This option enables basic support for the PC Tech RZ1000/1 | |
631 | PATA controllers via the new ATA layer | |
632 | ||
633 | If unsure, say N. | |
634 | ||
635 | config PATA_SC1200 | |
e3389cbc AC |
636 | tristate "SC1200 PATA support" |
637 | depends on PCI | |
669a5db4 JG |
638 | help |
639 | This option enables support for the NatSemi/AMD SC1200 SoC | |
640 | companion chip used with the Geode processor family. | |
641 | ||
642 | If unsure, say N. | |
643 | ||
644 | config PATA_SERVERWORKS | |
942d0947 AC |
645 | tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support" |
646 | depends on PCI | |
669a5db4 JG |
647 | help |
648 | This option enables support for the Serverworks OSB4/CSB5/CSB6 and | |
649 | HT1000 PATA controllers, via the new ATA layer. | |
650 | ||
651 | If unsure, say N. | |
652 | ||
669a5db4 JG |
653 | config PATA_SIL680 |
654 | tristate "CMD / Silicon Image 680 PATA support" | |
655 | depends on PCI | |
656 | help | |
657 | This option enables support for CMD / Silicon Image 680 PATA. | |
658 | ||
659 | If unsure, say N. | |
660 | ||
661 | config PATA_SIS | |
e3389cbc AC |
662 | tristate "SiS PATA support" |
663 | depends on PCI | |
669a5db4 JG |
664 | help |
665 | This option enables support for SiS PATA controllers | |
666 | ||
667 | If unsure, say N. | |
668 | ||
8e182a90 AC |
669 | config PATA_TOSHIBA |
670 | tristate "Toshiba Piccolo support (Experimental)" | |
671 | depends on PCI && EXPERIMENTAL | |
672 | help | |
673 | Support for the Toshiba Piccolo controllers. Currently only the | |
674 | primary channel is supported by this driver. | |
675 | ||
676 | If unsure, say N. | |
677 | ||
669a5db4 JG |
678 | config PATA_VIA |
679 | tristate "VIA PATA support" | |
680 | depends on PCI | |
681 | help | |
682 | This option enables support for the VIA PATA interfaces | |
683 | found on the many VIA chipsets. | |
684 | ||
685 | If unsure, say N. | |
686 | ||
687 | config PATA_WINBOND | |
688 | tristate "Winbond SL82C105 PATA support" | |
689 | depends on PCI | |
690 | help | |
691 | This option enables support for SL82C105 PATA devices found in the | |
692 | Netwinder and some other systems | |
693 | ||
694 | If unsure, say N. | |
695 | ||
7e45b0e5 AC |
696 | config PATA_WINBOND_VLB |
697 | tristate "Winbond W83759A VLB PATA support (Experimental)" | |
698 | depends on ISA && EXPERIMENTAL | |
699 | help | |
700 | Support for the Winbond W83759A controller on Vesa Local Bus | |
701 | systems. | |
702 | ||
cc18e0fe BD |
703 | config HAVE_PATA_PLATFORM |
704 | bool | |
705 | help | |
706 | This is an internal configuration node for any machine that | |
707 | uses pata-platform driver to enable the relevant driver in the | |
708 | configuration structure without having to submit endless patches | |
709 | to update the PATA_PLATFORM entry. | |
710 | ||
a20c9e82 PM |
711 | config PATA_PLATFORM |
712 | tristate "Generic platform device PATA support" | |
2ad69677 | 713 | depends on EMBEDDED || PPC || HAVE_PATA_PLATFORM |
a20c9e82 PM |
714 | help |
715 | This option enables support for generic directly connected ATA | |
716 | devices commonly found on embedded systems. | |
717 | ||
718 | If unsure, say N. | |
61f71621 | 719 | |
918d7b7c SM |
720 | config PATA_AT91 |
721 | tristate "PATA support for AT91SAM9260" | |
722 | depends on ARM && ARCH_AT91 | |
723 | help | |
724 | This option enables support for IDE devices on the Atmel AT91SAM9260 SoC. | |
725 | ||
726 | If unsure, say N. | |
727 | ||
61f71621 AV |
728 | config PATA_OF_PLATFORM |
729 | tristate "OpenFirmware platform device PATA support" | |
730 | depends on PATA_PLATFORM && PPC_OF | |
731 | help | |
732 | This option enables support for generic directly connected ATA | |
733 | devices commonly found on embedded systems with OpenFirmware | |
734 | bindings. | |
735 | ||
736 | If unsure, say N. | |
a20c9e82 | 737 | |
73b6a2be RK |
738 | config PATA_ICSIDE |
739 | tristate "Acorn ICS PATA support" | |
740 | depends on ARM && ARCH_ACORN | |
741 | help | |
742 | On Acorn systems, say Y here if you wish to use the ICS PATA | |
743 | interface card. This is not required for ICS partition support. | |
744 | If you are unsure, say N to this. | |
745 | ||
0df0d0a0 AZ |
746 | config PATA_IXP4XX_CF |
747 | tristate "IXP4XX Compact Flash support" | |
748 | depends on ARCH_IXP4XX | |
749 | help | |
750 | This option enables support for a Compact Flash connected on | |
751 | the ixp4xx expansion bus. This driver had been written for | |
752 | Loft/Avila boards in mind but can work with others. | |
753 | ||
754 | If unsure, say N. | |
755 | ||
3c929c6f DD |
756 | config PATA_OCTEON_CF |
757 | tristate "OCTEON Boot Bus Compact Flash support" | |
758 | depends on CPU_CAVIUM_OCTEON | |
759 | help | |
760 | This option enables a polled compact flash driver for use with | |
761 | compact flash cards attached to the OCTEON boot bus. | |
762 | ||
763 | If unsure, say N. | |
764 | ||
a619f981 AI |
765 | config PATA_SCC |
766 | tristate "Toshiba's Cell Reference Set IDE support" | |
aeb9362a | 767 | depends on PCI && PPC_CELLEB |
a619f981 AI |
768 | help |
769 | This option enables support for the built-in IDE controller on | |
770 | Toshiba Cell Reference Board. | |
771 | ||
772 | If unsure, say N. | |
773 | ||
07ab85de AD |
774 | config PATA_SCH |
775 | tristate "Intel SCH PATA support" | |
776 | depends on PCI | |
777 | help | |
778 | This option enables support for Intel SCH PATA on the Intel | |
779 | SCH (US15W, US15L, UL11L) series host controllers. | |
780 | ||
781 | If unsure, say N. | |
782 | ||
d830d173 SZ |
783 | config PATA_BF54X |
784 | tristate "Blackfin 54x ATAPI support" | |
785 | depends on BF542 || BF548 || BF549 | |
786 | help | |
787 | This option enables support for the built-in ATAPI controller on | |
788 | Blackfin 54x family chips. | |
789 | ||
790 | If unsure, say N. | |
791 | ||
88358ab0 BH |
792 | config PATA_MACIO |
793 | tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE" | |
794 | depends on PPC_PMAC | |
795 | help | |
796 | Most IDE capable PowerMacs have IDE busses driven by a variant | |
797 | of this controller which is part of the Apple chipset used on | |
798 | most PowerMac models. Some models have multiple busses using | |
799 | different chipsets, though generally, MacIO is one of them. | |
800 | ||
801 | ||
127102ae | 802 | endif # ATA_SFF |
b196fc69 | 803 | endif # ATA |