Commit | Line | Data |
---|---|---|
3957df61 MP |
1 | /* |
2 | * pata_cs5536.c - CS5536 PATA for new ATA layer | |
3 | * (C) 2007 Martin K. Petersen <mkp@mkp.net> | |
d63e94a4 | 4 | * (C) 2011 Bartlomiej Zolnierkiewicz |
3957df61 MP |
5 | * |
6 | * This program is free software; you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License version 2 as | |
8 | * published by the Free Software Foundation. | |
9 | * | |
10 | * This program is distributed in the hope that it will be useful, | |
11 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
12 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
13 | * GNU General Public License for more details. | |
14 | * | |
15 | * You should have received a copy of the GNU General Public License | |
16 | * along with this program; if not, write to the Free Software | |
17 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
18 | * | |
19 | * Documentation: | |
20 | * Available from AMD web site. | |
21 | * | |
22 | * The IDE timing registers for the CS5536 live in the Geode Machine | |
23 | * Specific Register file and not PCI config space. Most BIOSes | |
24 | * virtualize the PCI registers so the chip looks like a standard IDE | |
25 | * controller. Unfortunately not all implementations get this right. | |
26 | * In particular some have problems with unaligned accesses to the | |
27 | * virtualized PCI registers. This driver always does full dword | |
28 | * writes to work around the issue. Also, in case of a bad BIOS this | |
29 | * driver can be loaded with the "msr=1" parameter which forces using | |
30 | * the Machine Specific Registers to configure the device. | |
31 | */ | |
32 | ||
33 | #include <linux/kernel.h> | |
34 | #include <linux/module.h> | |
35 | #include <linux/pci.h> | |
3957df61 MP |
36 | #include <linux/blkdev.h> |
37 | #include <linux/delay.h> | |
38 | #include <linux/libata.h> | |
39 | #include <scsi/scsi_host.h> | |
abf8f2b8 | 40 | #include <linux/dmi.h> |
9272dcc2 WZ |
41 | |
42 | #ifdef CONFIG_X86_32 | |
3957df61 | 43 | #include <asm/msr.h> |
9272dcc2 WZ |
44 | static int use_msr; |
45 | module_param_named(msr, use_msr, int, 0644); | |
46 | MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)"); | |
47 | #else | |
ff5dd32b JG |
48 | #undef rdmsr /* avoid accidental MSR usage on, e.g. x86-64 */ |
49 | #undef wrmsr | |
9272dcc2 WZ |
50 | #define rdmsr(x, y, z) do { } while (0) |
51 | #define wrmsr(x, y, z) do { } while (0) | |
52 | #define use_msr 0 | |
53 | #endif | |
3957df61 MP |
54 | |
55 | #define DRV_NAME "pata_cs5536" | |
9272dcc2 | 56 | #define DRV_VERSION "0.0.8" |
3957df61 MP |
57 | |
58 | enum { | |
d63e94a4 | 59 | MSR_IDE_CFG = 0x51300010, |
3957df61 | 60 | PCI_IDE_CFG = 0x40, |
3957df61 | 61 | |
d63e94a4 BZ |
62 | CFG = 0, |
63 | DTC = 2, | |
64 | CAST = 3, | |
65 | ETC = 4, | |
66 | ||
67 | IDE_CFG_CHANEN = (1 << 1), | |
68 | IDE_CFG_CABLE = (1 << 17) | (1 << 16), | |
3957df61 MP |
69 | |
70 | IDE_D0_SHIFT = 24, | |
71 | IDE_D1_SHIFT = 16, | |
72 | IDE_DRV_MASK = 0xff, | |
73 | ||
74 | IDE_CAST_D0_SHIFT = 6, | |
75 | IDE_CAST_D1_SHIFT = 4, | |
76 | IDE_CAST_DRV_MASK = 0x3, | |
77 | IDE_CAST_CMD_MASK = 0xff, | |
78 | IDE_CAST_CMD_SHIFT = 24, | |
79 | ||
d63e94a4 | 80 | IDE_ETC_UDMA_MASK = 0xc0, |
3957df61 MP |
81 | }; |
82 | ||
abf8f2b8 CG |
83 | /* Some Bachmann OT200 devices have a non working UDMA support due a |
84 | * missing resistor. | |
85 | */ | |
86 | static const struct dmi_system_id udma_quirk_dmi_table[] = { | |
87 | { | |
88 | .ident = "Bachmann electronic OT200", | |
89 | .matches = { | |
90 | DMI_MATCH(DMI_SYS_VENDOR, "Bachmann electronic"), | |
91 | DMI_MATCH(DMI_PRODUCT_NAME, "OT200"), | |
92 | DMI_MATCH(DMI_PRODUCT_VERSION, "1") | |
93 | }, | |
94 | }, | |
95 | { } | |
96 | }; | |
97 | ||
d63e94a4 | 98 | static int cs5536_read(struct pci_dev *pdev, int reg, u32 *val) |
3957df61 MP |
99 | { |
100 | if (unlikely(use_msr)) { | |
9272dcc2 | 101 | u32 dummy __maybe_unused; |
3957df61 | 102 | |
d63e94a4 | 103 | rdmsr(MSR_IDE_CFG + reg, *val, dummy); |
3957df61 MP |
104 | return 0; |
105 | } | |
106 | ||
d63e94a4 | 107 | return pci_read_config_dword(pdev, PCI_IDE_CFG + reg * 4, val); |
3957df61 MP |
108 | } |
109 | ||
d63e94a4 | 110 | static int cs5536_write(struct pci_dev *pdev, int reg, int val) |
3957df61 MP |
111 | { |
112 | if (unlikely(use_msr)) { | |
d63e94a4 | 113 | wrmsr(MSR_IDE_CFG + reg, val, 0); |
3957df61 MP |
114 | return 0; |
115 | } | |
116 | ||
d63e94a4 BZ |
117 | return pci_write_config_dword(pdev, PCI_IDE_CFG + reg * 4, val); |
118 | } | |
119 | ||
120 | static void cs5536_program_dtc(struct ata_device *adev, u8 tim) | |
121 | { | |
122 | struct pci_dev *pdev = to_pci_dev(adev->link->ap->host->dev); | |
123 | int dshift = adev->devno ? IDE_D1_SHIFT : IDE_D0_SHIFT; | |
124 | u32 dtc; | |
125 | ||
126 | cs5536_read(pdev, DTC, &dtc); | |
127 | dtc &= ~(IDE_DRV_MASK << dshift); | |
128 | dtc |= tim << dshift; | |
129 | cs5536_write(pdev, DTC, dtc); | |
3957df61 MP |
130 | } |
131 | ||
132 | /** | |
133 | * cs5536_cable_detect - detect cable type | |
134 | * @ap: Port to detect on | |
3957df61 | 135 | * |
d63e94a4 BZ |
136 | * Perform cable detection for ATA66 capable cable. |
137 | * | |
138 | * Returns a cable type. | |
3957df61 MP |
139 | */ |
140 | ||
141 | static int cs5536_cable_detect(struct ata_port *ap) | |
142 | { | |
143 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | |
144 | u32 cfg; | |
145 | ||
146 | cs5536_read(pdev, CFG, &cfg); | |
147 | ||
d63e94a4 | 148 | if (cfg & IDE_CFG_CABLE) |
3957df61 MP |
149 | return ATA_CBL_PATA80; |
150 | else | |
151 | return ATA_CBL_PATA40; | |
152 | } | |
153 | ||
154 | /** | |
155 | * cs5536_set_piomode - PIO setup | |
156 | * @ap: ATA interface | |
157 | * @adev: device on the interface | |
158 | */ | |
159 | ||
160 | static void cs5536_set_piomode(struct ata_port *ap, struct ata_device *adev) | |
161 | { | |
162 | static const u8 drv_timings[5] = { | |
163 | 0x98, 0x55, 0x32, 0x21, 0x20, | |
164 | }; | |
165 | ||
166 | static const u8 addr_timings[5] = { | |
167 | 0x2, 0x1, 0x0, 0x0, 0x0, | |
168 | }; | |
169 | ||
170 | static const u8 cmd_timings[5] = { | |
171 | 0x99, 0x92, 0x90, 0x22, 0x20, | |
172 | }; | |
173 | ||
174 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | |
175 | struct ata_device *pair = ata_dev_pair(adev); | |
176 | int mode = adev->pio_mode - XFER_PIO_0; | |
177 | int cmdmode = mode; | |
b6966a61 | 178 | int cshift = adev->devno ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT; |
d63e94a4 | 179 | u32 cast; |
3957df61 MP |
180 | |
181 | if (pair) | |
182 | cmdmode = min(mode, pair->pio_mode - XFER_PIO_0); | |
183 | ||
d63e94a4 | 184 | cs5536_program_dtc(adev, drv_timings[mode]); |
3957df61 | 185 | |
d63e94a4 | 186 | cs5536_read(pdev, CAST, &cast); |
3957df61 MP |
187 | |
188 | cast &= ~(IDE_CAST_DRV_MASK << cshift); | |
189 | cast |= addr_timings[mode] << cshift; | |
190 | ||
191 | cast &= ~(IDE_CAST_CMD_MASK << IDE_CAST_CMD_SHIFT); | |
192 | cast |= cmd_timings[cmdmode] << IDE_CAST_CMD_SHIFT; | |
193 | ||
3957df61 | 194 | cs5536_write(pdev, CAST, cast); |
3957df61 MP |
195 | } |
196 | ||
197 | /** | |
198 | * cs5536_set_dmamode - DMA timing setup | |
199 | * @ap: ATA interface | |
200 | * @adev: Device being configured | |
201 | * | |
202 | */ | |
203 | ||
204 | static void cs5536_set_dmamode(struct ata_port *ap, struct ata_device *adev) | |
205 | { | |
206 | static const u8 udma_timings[6] = { | |
207 | 0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6, | |
208 | }; | |
209 | ||
210 | static const u8 mwdma_timings[3] = { | |
211 | 0x67, 0x21, 0x20, | |
212 | }; | |
213 | ||
214 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | |
d63e94a4 | 215 | u32 etc; |
3957df61 | 216 | int mode = adev->dma_mode; |
b6966a61 | 217 | int dshift = adev->devno ? IDE_D1_SHIFT : IDE_D0_SHIFT; |
3957df61 | 218 | |
d63e94a4 | 219 | cs5536_read(pdev, ETC, &etc); |
3957df61 | 220 | |
d63e94a4 | 221 | if (mode >= XFER_UDMA_0) { |
3957df61 MP |
222 | etc &= ~(IDE_DRV_MASK << dshift); |
223 | etc |= udma_timings[mode - XFER_UDMA_0] << dshift; | |
3957df61 | 224 | } else { /* MWDMA */ |
d63e94a4 BZ |
225 | etc &= ~(IDE_ETC_UDMA_MASK << dshift); |
226 | cs5536_program_dtc(adev, mwdma_timings[mode - XFER_MW_DMA_0]); | |
3957df61 | 227 | } |
d63e94a4 BZ |
228 | |
229 | cs5536_write(pdev, ETC, etc); | |
3957df61 MP |
230 | } |
231 | ||
232 | static struct scsi_host_template cs5536_sht = { | |
68d1d07b | 233 | ATA_BMDMA_SHT(DRV_NAME), |
3957df61 MP |
234 | }; |
235 | ||
236 | static struct ata_port_operations cs5536_port_ops = { | |
ba3a221c | 237 | .inherits = &ata_bmdma32_port_ops, |
029cfd6b | 238 | .cable_detect = cs5536_cable_detect, |
3957df61 MP |
239 | .set_piomode = cs5536_set_piomode, |
240 | .set_dmamode = cs5536_set_dmamode, | |
3957df61 MP |
241 | }; |
242 | ||
243 | /** | |
244 | * cs5536_init_one | |
245 | * @dev: PCI device | |
246 | * @id: Entry in match table | |
247 | * | |
248 | */ | |
249 | ||
250 | static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id) | |
251 | { | |
252 | static const struct ata_port_info info = { | |
3957df61 | 253 | .flags = ATA_FLAG_SLAVE_POSS, |
14bdef98 EIB |
254 | .pio_mask = ATA_PIO4, |
255 | .mwdma_mask = ATA_MWDMA2, | |
3957df61 MP |
256 | .udma_mask = ATA_UDMA5, |
257 | .port_ops = &cs5536_port_ops, | |
258 | }; | |
259 | ||
abf8f2b8 CG |
260 | static const struct ata_port_info no_udma_info = { |
261 | .flags = ATA_FLAG_SLAVE_POSS, | |
262 | .pio_mask = ATA_PIO4, | |
263 | .port_ops = &cs5536_port_ops, | |
264 | }; | |
265 | ||
266 | ||
267 | const struct ata_port_info *ppi[2]; | |
3957df61 MP |
268 | u32 cfg; |
269 | ||
abf8f2b8 CG |
270 | if (dmi_check_system(udma_quirk_dmi_table)) |
271 | ppi[0] = &no_udma_info; | |
272 | else | |
273 | ppi[0] = &info; | |
274 | ||
275 | ppi[1] = &ata_dummy_port_info; | |
276 | ||
3957df61 MP |
277 | if (use_msr) |
278 | printk(KERN_ERR DRV_NAME ": Using MSR regs instead of PCI\n"); | |
279 | ||
280 | cs5536_read(dev, CFG, &cfg); | |
281 | ||
282 | if ((cfg & IDE_CFG_CHANEN) == 0) { | |
283 | printk(KERN_ERR DRV_NAME ": disabled by BIOS\n"); | |
284 | return -ENODEV; | |
285 | } | |
286 | ||
1c5afdf7 | 287 | return ata_pci_bmdma_init_one(dev, ppi, &cs5536_sht, NULL, 0); |
3957df61 MP |
288 | } |
289 | ||
290 | static const struct pci_device_id cs5536[] = { | |
291 | { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), }, | |
292 | { }, | |
293 | }; | |
294 | ||
295 | static struct pci_driver cs5536_pci_driver = { | |
296 | .name = DRV_NAME, | |
297 | .id_table = cs5536, | |
298 | .probe = cs5536_init_one, | |
299 | .remove = ata_pci_remove_one, | |
58eb8cd5 | 300 | #ifdef CONFIG_PM_SLEEP |
3957df61 MP |
301 | .suspend = ata_pci_device_suspend, |
302 | .resume = ata_pci_device_resume, | |
303 | #endif | |
304 | }; | |
305 | ||
2fc75da0 | 306 | module_pci_driver(cs5536_pci_driver); |
3957df61 MP |
307 | |
308 | MODULE_AUTHOR("Martin K. Petersen"); | |
309 | MODULE_DESCRIPTION("low-level driver for the CS5536 IDE controller"); | |
310 | MODULE_LICENSE("GPL"); | |
311 | MODULE_DEVICE_TABLE(pci, cs5536); | |
312 | MODULE_VERSION(DRV_VERSION); |